PETG FILM
HSQY
PETG
1MM-7MM
Transparent or Colored
Roll: 110-1280mm Sheet: 915*1220mm/1000*2000mm
1000 KG.
| Availability: | |
|---|---|
Product Description
HSQY supplies 0.5mm (500 micron) clear PETG sheet for desktop vacuum forming, thermoformed prototypes, transparent packaging, molds and formed components. PETG combines clarity, toughness and formability for converters, packaging manufacturers, product developers and distributors.
Sheets can be cut to fit desktop vacuum forming equipment, including the 330 × 250mm sheet format used by Vaquform DT2. Machine-specific forming performance should be verified with a sample before bulk production. HSQY also offers other PETG thicknesses, roll widths and custom sheet dimensions for industrial applications.
Request a PETG Sheet Quotation
| Property | Specification |
|---|---|
| Material | PETG (glycol-modified polyethylene terephthalate) |
| Featured thickness | 0.5mm / 500 microns |
| Overall thickness range | 0.15–7mm, subject to grade and format |
| Roll width | 110–1280mm |
| Standard sheet sizes | 915 × 1220mm; 1000 × 2000mm; custom cut sizes |
| Desktop machine sheet format | 330 × 250mm for Vaquform DT2; confirm cutting availability |
| Density | 1.27–1.29g/cm³ |
| Appearance | Clear, transparent PETG |
| Supply formats | Sheets, rolls and custom-cut blanks |
| MOQ | 1000kg |
Review the PETG material data sheet when evaluating sheet properties and processing requirements. For application-specific compliance or test documents, please contact HSQY with your intended use.
Download PETG Technical Data Sheet (PDF)
PETG Roll Stock
Thermoformed Dental Model
Precision Cut Ruler
High optical clarity for transparent formed components and packaging.
Good impact resistance and toughness for handling and secondary fabrication.
Suitable for vacuum forming with correctly selected heating and tooling conditions.
Can be cut or trimmed into machine-specific sheet dimensions.
Pre-drying is generally unnecessary for properly stored PETG sheet under typical thermoforming conditions; evaluate moisture exposure and material grade.
Custom sheet sizes and roll supply support prototype development and volume conversion.
The Vaquform DT2 uses 330 × 250mm sheets and accepts thermoformable materials within its specified thickness range. A 0.5mm PETG sheet falls within that range. Buyers should confirm sheet dimensions, clamping fit, protective film removal, heating settings and finished-part performance on their own equipment.
For third-party PETG sheets, forming results can vary with resin formulation, sheet condition, tool geometry, draw depth and heating profile. Trial forming is recommended before ordering production quantities. HSQY PETG sheet is not presented as an official Vaquform-branded consumable.
| Application | Use |
|---|---|
| Product prototyping | Trial formed parts, covers and housings |
| Transparent packaging | Blister-style packs, display trays and protective covers |
| Mold and tooling development | Vacuum-formed patterns and trial mold shapes |
| Display and signage | Clear formed display components |
| Specialized formed products | Application-specific components subject to grade validation |
For consistent vacuum forming, match the sheet dimensions to the machine frame, remove any protective film when required, and use a clean mold with adequate draft and ventilation paths. Heating conditions should be established by trials rather than assuming that one temperature works for every PETG grade and sheet thickness.
Complex geometry, deep draws and sharp corners can cause uneven material distribution. Evaluate corner radii, tool design, draw ratio and cooling before committing to high-volume production. For applications involving food contact, medical use or regulated products, request documentation for the specific material grade and finished application.
PETG Sheet Production
PETG Roll Packing
Contact HSQY to confirm the available technical documentation and test reports for your requested PETG grade. Documentation requirements should be specified before order confirmation.
HSQY Plastic Group meets distributors, converters and industrial customers at international trade exhibitions.
2017 Shanghai Exhibition
2018 Shanghai Exhibition
2023 Saudi Exhibition
2023 American Exhibition
2024 Australian Exhibition
2024 American Exhibition
2024 Mexico Exhibition
2024 Paris Exhibition
PETG is a supported material type for Vaquform DT2, and 0.5mm is within the machine's stated thickness range. Cut the sheet to the correct frame dimensions and test the selected HSQY grade with your own forming settings before production.
The DT2 uses 330 × 250mm sheets. Please specify this size when requesting custom-cut PETG blanks and confirm availability for your order quantity.
Properly stored PETG sheet generally does not require pre-drying for conventional thermoforming. Moisture exposure, storage conditions and the selected grade may affect processing, so follow the applicable technical guidance.
Yes. HSQY offers PETG sheet and roll formats, including custom-cut dimensions subject to production confirmation.
Clear PETG can be used for transparent packaging, protective covers and display components. For direct food contact or other regulated applications, confirm the relevant grade and supporting documentation.
Contact HSQY to confirm sample availability, dimensions and shipping arrangements. A trial sample is recommended before a bulk order.
The stated MOQ is 1000kg. Confirm any additional requirements for custom-cut dimensions or specialized grades when requesting a quotation.
Please provide thickness, sheet dimensions or roll width, required quantity, application, forming machine model, delivery country and any technical or documentation requirements.
HSQY Plastic Group supplies PETG and other plastic sheet materials to distributors, packaging converters and industrial customers. We support standard and customized sheet specifications for vacuum forming, packaging, displays and other fabrication projects.
Share your material specifications and application details to discuss PETG sheet supply, sample evaluation and bulk order requirements.
Product Category
Let’s Find the Right Plastic Solution