Pharmaceutical Grade Rigid PVC Blister Film

Pharmaceutical Grade Rigid PVC Blister Film

HSQY pharmaceutical rigid PVC blister film is designed for thermoformed tablet and capsule packaging, with 0.12-0.30mm thickness, clear and colored options, consistent forming performance and custom dimensions.

Rigid PVC is widely used as the forming web in pharmaceutical blister packaging. During production, the PVC web is heated and formed into cavities, the pharmaceutical product is loaded into those cavities, and the package is sealed with a compatible lidding material according to the approved packaging system.

This page focuses on HSQY-210616 pharmaceutical rigid PVC in the current listed thickness range of 0.12-0.30mm. Clear, white, red, green, yellow and other customized color options can be discussed according to packaging, identification and product-protection requirements.

Pharmaceutical Rigid PVC Film Specifications

Important: The 0.12-0.30mm range above is the current product-level specification for HSQY-210616. The older general PVC table on this page also lists a broader 0.07-6mm processing capability, but that wider range should not automatically be treated as the pharmaceutical blister-film specification.

What Is Pharmaceutical Rigid PVC Blister Film?

Pharmaceutical rigid PVC film is a thermoformable plastic web used to create cavities in blister packages. It provides the physical structure that holds tablets, capsules or other qualified unit-dose products before the package is sealed with a compatible lidding material.

Rigid PVC is widely selected because it provides useful clarity, rigidity, dimensional stability and thermoforming performance while remaining economical for many standard blister-packaging programs.

Plain PVC provides a basic level of environmental protection. Medicines requiring substantially greater moisture, oxygen or light protection may require PVC/PVDC, PCTFE-based laminates, cold-form aluminum or another qualified barrier structure rather than standard rigid PVC alone.

How Pharmaceutical PVC Blister Packaging Works

The forming film, cavity geometry, lidding material, sealing system and packaging machine should be evaluated as one complete system rather than as independent components.

Why Rigid PVC Is Used for Pharmaceutical Blisters

• Good thermoformability: Suitable rigid PVC grades can be formed into repeatable blister cavities.

• Useful rigidity: Provides structural support for the finished blister card.

• Clear appearance: Transparent grades allow visual inspection of the packaged product.

• Colored options: Transparent tinted or opaque grades can support identification and packaging design requirements.

• Dimensional stability: Important for consistent web handling, forming and sealing on blister lines.

• Established converting process: Rigid PVC is widely processed on compatible thermoforming blister equipment.

0.12-0.30mm Pharmaceutical PVC Film

The current HSQY-210616 product listing specifies pharmaceutical rigid PVC in nominal thicknesses from 0.12mm to 0.30mm.

Thickness influences web rigidity, cavity-forming behavior, material consumption and finished blister stiffness. The correct gauge should therefore be selected according to the cavity design, product dimensions, machine configuration and approved packaging specification.

Clear & Colored Pharmaceutical PVC Film

HSQY currently lists clear, white, red, green, yellow and customized color options for HSQY-210616.

Color should not be used as a substitute for validated light-protection data. If the medicine is light sensitive, the finished packaging system should be evaluated against the required photostability and shelf-life criteria.

Pharmaceutical PVC for Tablet Blister Packaging

Rigid PVC is widely used for thermoformed tablet blister packs where good forming performance, package rigidity and product visibility are required.

Tablet size, shape, cavity depth, tablet sensitivity, target shelf life and distribution climate should all be considered before selecting the final PVC thickness and blister structure.

Pharmaceutical PVC for Capsule Blister Packaging

Rigid PVC can also be evaluated for capsule blister packs. Capsule dimensions and cavity geometry can require different draw depths than tablet packaging, so blister tooling and film gauge should be considered together.

For capsules or formulations that are particularly sensitive to moisture or oxygen, plain PVC may not provide sufficient barrier protection and a higher-barrier pharmaceutical film should be evaluated.

Plain PVC vs. High-Barrier Pharmaceutical Film

The correct structure should be selected from pharmaceutical stability data, required shelf life, cavity design, distribution climate and complete package validation rather than simply choosing the highest-barrier material available.

Compatibility with Pharmaceutical Blister Machines

Pharmaceutical forming film should be matched to the customer's blister machine and tooling rather than ordered only by material name.

Lidding Foil & Seal Compatibility

A pharmaceutical blister package depends on both the PVC forming web and the selected lidding material. The lidding foil, heat-seal lacquer, sealing temperature, pressure, dwell time and tool design should be validated together.

Before commercial production, the converter should evaluate forming quality, seal performance, visual appearance and package integrity according to the approved pharmaceutical packaging procedure.

Surface Quality & Web Consistency

The original broader PVC capability includes glossy, matte, fine-frosted and grain surfaces. Pharmaceutical blister film, however, should use the surface specification approved for the packaging line rather than automatically selecting from general decorative PVC finishes.

For blister-line performance, buyers should define requirements such as clarity, surface cleanliness, slip, blocking behavior, roll flatness, thickness consistency and winding quality where these are relevant to the project.

Original General Rigid PVC Capability Reference

The original page also contains a broader rigid PVC capability table. These values describe general PVC production capability and should not be interpreted as the approved specification for every pharmaceutical blister-film order.

For pharmaceutical blister inquiries, use the product-level 0.12-0.30mm HSQY-210616 specification as the starting point and confirm all final parameters against the approved pharmaceutical grade.

Special Functional PVC Requirements

The original general PVC information also references anti-static, UV-stabilized, self-extinguishing and anti-sticking functions. These should be treated as grade-specific capabilities rather than universal properties of every pharmaceutical PVC film.

If a pharmaceutical or medical-packaging project requires a special electrical, UV, flame or surface property, provide the exact requirement and applicable test method so the appropriate formulation and documentation can be evaluated.

Pharmaceutical & Medical Packaging Applications

The primary positioning of this product is pharmaceutical and medical packaging where rigid PVC forming performance is required. Final material approval should be based on the intended product, package design, destination market and required supporting documentation.

Technical Documents

The original page provides the following PVC reference documents. Because these filenames describe general clear PVC sheet and film, buyers should confirm whether each document applies to the exact pharmaceutical grade being quoted.

PVC Clear Sheet Data Sheet.pdf

PVC Clear Film Data Sheet.pdf

PVC Sheet Test Report.pdf

What to Confirm for Pharmaceutical Packaging Approval

Frequently Asked Questions About Pharmaceutical Rigid PVC Film

What is pharmaceutical rigid PVC blister film?

It is a rigid thermoforming PVC material used as the cavity-forming web in pharmaceutical blister packaging.

What is the current thickness range of HSQY-210616?

The current product-level listing specifies 0.12mm to 0.30mm for HSQY-210616.

Why does the old specification table show 0.07-6mm?

The 0.07-6mm value comes from the broader general rigid PVC capability table. For this pharmaceutical product, the product-level 0.12-0.30mm specification should be used as the starting point for inquiries.

What colors are available?

The current listing includes clear, white, red, green, yellow and customized colors. Final color should be approved against the required packaging specification.

Can pharmaceutical PVC be used for tablet blister packaging?

Yes, suitable pharmaceutical rigid PVC is commonly used as a thermoforming web for tablet blister packaging, subject to the approved package design and product qualification.

Can it be used for capsule blister packaging?

It can be evaluated for capsule blister packaging. Capsule dimensions, draw depth, barrier requirement and machine configuration should be considered when selecting the specification.

Is rigid PVC suitable for every pharmaceutical product?

No. Plain PVC provides basic barrier performance and may not be suitable for highly moisture-sensitive, oxygen-sensitive or light-sensitive products. Higher-barrier structures should be evaluated where required by stability data.

What is the difference between PVC and PVC/PVDC blister film?

Plain rigid PVC is an economical thermoforming material with basic barrier performance. PVC/PVDC adds a PVDC barrier layer or coating to improve protection against moisture and gases.

Can HSQY supply custom roll width?

The current product listing states customized size. For blister-line orders, provide the exact web width and tolerance required by the packaging equipment.

What information is needed to match my blister machine?

Provide the machine model, web width, core requirement, maximum roll diameter or weight, cavity tooling information, production speed and winding direction where available.

Can colored PVC protect light-sensitive medicine?

Color alone should not be assumed to provide adequate pharmaceutical light protection. Required protection should be established from product-stability data and validated using the complete package.

Is the film anti-static, UV resistant or flame retardant?

The original broad PVC information lists anti-static, UV-stabilized and self-extinguishing capabilities, but these should be treated as grade-specific options rather than universal properties of the pharmaceutical PVC product.

What surface finishes are available?

The broader PVC capability lists glossy, matte, fine-frosted and grain surfaces. Pharmaceutical blister film should use the surface specification approved for the packaging application.

Does HSQY provide technical documents?

The original page provides PVC sheet and film data sheets and a PVC sheet test report. Buyers should confirm which documents apply to the exact pharmaceutical grade being purchased and request any project-specific documentation separately.

Should I qualify the material on my packaging line?

Yes. Pharmaceutical packaging material should be evaluated using the intended blister machine, tooling, lidding material, sealing conditions and package-validation procedure before commercial production.

What should I provide for a quotation?

Please provide the dosage form, current material structure, film thickness, roll width, machine model, cavity drawing or dimensions, color, required barrier level, documentation requirements, quantity and destination.

Certificate

Available certificates and supporting documents should be confirmed for the exact pharmaceutical PVC grade, specification and destination-market requirement. A general company certificate should not be treated as evidence that every pharmaceutical application has the same regulatory approval.

HSQY Plastic Group Exhibitions

About HSQY Plastic Group

HSQY Plastic Group supplies rigid PVC and related plastic materials for packaging, medical, construction and industrial applications. The current company information references more than 20 years of experience and 8 factories.

For pharmaceutical packaging projects, HSQY can discuss PVC thickness, roll dimensions, color, forming requirements, packaging-line compatibility and required technical documentation according to the approved purchasing specification.

ChangZhou HuiSu QinYe Plastic Group established more than 16 years, with 8 plants to offer all kinds of Plastic products, including PVC RIGID CLEAR SHEET,PVC FLEXIBLE FILM, PVC GREY BOARD, PVC FOAM BOARD, PET SHEET, ACRYLIC SHEET. Widely used for Package, Sign,D ecoration and other areas. 

 

Our concept of considering both quality and service equally importand and performance gains trust from customers, that is why we have established good cooperation with our clients from Spain, Italy, Austria, Portugar, Germany, Greece, Poland, England, American, South American, India, Thailand, Malaysia and so on.

 

By choosing HSQY, you'll get the strength and stability. We manuacture the industry's broadest range of products and continuously develop new technologies, formulations and solutions. Our reputation for quality, customer service and technical support is unsurpassed in the industry. We continuously strive to advance sustainability practices in the markets we serve.