HSQY Transparent 0.8mm-PC Soft Films

HSQY Transparent 0.8mm-PC Soft Films

HSQY PC-011 is a transparent 0.8mm polycarbonate film product supplied under the PC film model. It is intended for B2B buyers evaluating clear polycarbonate film where exact thickness, dimensions, appearance and downstream processing requirements must be matched to the application.

The current backend identifies the product color range as Clear, Clear with color and Opaque color, with custom size available. This page focuses on the transparent 0.8mm configuration shown in the product name, while the broader backend thickness field covers 0.8mm to 15mm.

Surface finish, roll or sheet format, printing compatibility, forming performance, UV resistance, flame rating, operating temperature, optical transmission and other performance properties are not included in the current verified SKU fields. If any of these parameters are required, they should be confirmed for the exact grade and size before ordering.

Transparent 0.8mm Polycarbonate Film Specifications

The table below uses the current verified backend information. Values from the older product description that conflict with these fields or describe unrelated PC products are not treated as current PC-011 specifications.

What Is Transparent Polycarbonate Film?

Polycarbonate film is a thin-format PC material used by converters and manufacturers that require transparent or colored polycarbonate in a format thinner than many conventional rigid PC sheet products.

For this product, the key verified purchasing identifiers are the transparent 0.8mm specification, PC-011 product code and custom-size capability. Buyers should confirm any additional functional grade requirements rather than assuming that all polycarbonate films have identical optical, surface, thermal, UV or flame properties.

Why 0.8mm Matters in PC Film Selection

Thickness is one of the first parameters B2B buyers compare when sourcing polycarbonate film because it affects downstream tooling, bending behavior, cutting, forming, lamination and finished-part dimensions.

This product is identified as a transparent 0.8mm PC soft film. If the project requires another thickness within the broader backend range, the exact required value should be submitted separately and confirmed before quotation.

Clear and Colored PC Film Options

The current backend color field includes Clear, Clear with color and Opaque color. This specific page focuses on the transparent 0.8mm version.

If a tinted transparent or opaque version is required, provide the target color reference together with the required dimensions and application. Exact haze, light transmission, gloss, color tolerance or opacity values are not included in the verified PC-011 fields and should be confirmed separately when critical.

Application Evaluation for Transparent PC Film

Buyers commonly evaluate clear polycarbonate film for printed components, overlays, panels, labels, formed parts, electronic components and other converted products. However, suitability for any specific application depends on the exact PC grade, surface, dimensions and processing conditions.

PC-011 should therefore be qualified against the buyer's actual process rather than assuming that application claims from other polycarbonate film or sheet products automatically apply to this SKU.

Surface and Printing Requirements

Leading polycarbonate-film suppliers separate gloss, matte, velvet, textured, coated, printable and other surfaces into individual grades. The current PC-011 backend fields do not specify a confirmed surface structure or printing grade.

If the project requires screen printing, digital printing, offset printing, lamination, coating, embossing or another converting method, include the process and ink or adhesive system in the inquiry so compatibility can be reviewed for the exact supplied material.

Forming, Cutting and Fabrication Requirements

Polycarbonate films are commonly selected for converting operations, but the current PC-011 fields do not define thermoforming conditions, bend radius, die-cutting performance or dimensional tolerances.

Buyers using the material in precision converting should provide the finished-part drawing, tolerance requirements, process method and required material orientation where applicable. Sample testing is recommended when processing behavior is critical.

Grade-Specific Performance Should Be Confirmed

The older page content included claims for UV resistance, B1 flame performance, a -40°C to +120°C temperature range, specific impact-strength comparisons, long-term outdoor durability and insulation performance. These values are not included in the current verified PC-011 backend fields and are therefore not presented here as confirmed properties.

If your project requires UV stability, flame retardancy, optical transmission, electrical properties, temperature performance, impact data, chemical resistance or another technical value, specify the requirement and request the corresponding grade documentation before approval.

Information Required for a PC Film Quote

• Confirm PC-011 or identify the required PC film grade.

• Confirm 0.8mm thickness for this transparent product.

• Provide required custom width and length.

• Specify Clear, tinted-clear or opaque color.

• Provide the intended finished application.

• Specify required sheet or roll format if applicable.

• Specify gloss, matte, textured or other surface requirement if applicable.

• Provide printing, coating, lamination or forming process details if applicable.

• Specify dimensional tolerances if critical.

• Specify UV, flame, optical, electrical or temperature requirements if applicable.

• Provide required quantity and destination country or port.

Frequently Asked Questions

What is the thickness of this transparent PC film?

This product is identified as a transparent 0.8mm PC soft film. The broader backend thickness field for the product family is 0.8-15mm.

What is the product code?

The current product code is PC-011.

What colors are available?

The verified backend color field lists Clear, Clear with color and Opaque color. This specific product page focuses on the transparent 0.8mm version.

Can the PC film size be customized?

Yes. The current backend size field is Custom Size. Provide the required width and length for confirmation and quotation.

Is the surface glossy or matte?

A specific surface finish is not included in the current verified PC-011 fields. Provide the required gloss, matte or other surface specification for confirmation.

Is PC-011 suitable for printing?

Printing compatibility is not specified in the verified backend fields. If printing is required, provide the printing process, ink system and surface requirement so compatibility can be reviewed.

Is this PC film UV resistant?

UV resistance is not included in the current verified PC-011 specification. If outdoor or UV-stable performance is required, request a suitable grade and applicable technical data.

What is the flame rating of PC-011?

No flame classification is included in the current verified PC-011 fields. The older B1 statement is therefore not treated as a confirmed SKU property.

What is the operating temperature range?

A verified operating-temperature range is not provided in the current backend fields. Buyers should specify the minimum and maximum required temperature and exposure conditions for technical confirmation.

Is this product the same as thick rigid polycarbonate sheet?

This page is specifically for HSQY Transparent 0.8mm-PC Soft Films. Requirements for thicker rigid PC sheets, structural glazing or roofing products should be evaluated separately rather than applying their specifications to PC-011.

What information should I send for a quotation?

Provide thickness, custom dimensions, color, surface requirement, finished application, converting process, required technical properties, order quantity and destination country or port.

Packing

The original packing image is retained below. Exact packing format, protective masking, sheets or rolls per package, carton dimensions, pallet configuration and shipping quantities are not included in the current verified PC-011 fields and should be confirmed with the quotation.

About HSQY Polycarbonate Materials

HSQY supplies polycarbonate film and sheet products for B2B converting and manufacturing projects. For PC-011, buyers should specify the exact dimensions, appearance, processing method and required performance criteria so the supplied material can be reviewed against the intended application.

Buyers requiring other polycarbonate formats can also review HSQY PC sheets separately. Specifications from those products should not automatically be applied to this 0.8mm PC film.