PVC SHEET 01
HSQY
pvc lampshade sheet
white
0.3mm-0.5mm(Customization)
1300-1500mm(Customization)
lamp shade
2000 KG.
| Availability: | |
|---|---|
Product Description
HSQY Plastic Group supplies matte white rigid PVC lampshade sheet for table lamps, floor lamps, pendant shades and decorative lighting products. The matte surface provides a low-glare, uniform appearance while the rigid or semi-rigid PVC structure supports hard-backed lampshade manufacturing.
Common lampshade specifications are approximately 0.3mm to 0.5mm thick, with widths from 1300mm to 1500mm. Standard sheet sizes include 700 × 1000mm, 915 × 1830mm and 1220 × 2440mm, with customized dimensions available according to manufacturing requirements.
Matte PVC is suitable for lighting manufacturers that require consistent surface appearance, controlled reflection, good flatness and compatibility with cutting, printing, stamping, forming and other suitable converting processes.
The material is intended for lampshade manufacturers, lighting factories, decorative lighting brands, converters, wholesalers and distributors purchasing PVC material for repeated B2B production.
Matte White Rigid PVC Sheet for Lampshade Manufacturing
Matte PVC lampshade sheet is a rigid or semi-rigid polyvinyl chloride material with a non-glossy surface used as a backing or structural panel in hard-backed lampshades.
Unlike a high-gloss PVC surface, matte PVC reflects less direct light from its surface. This can provide a softer visual appearance and reduce noticeable glare when the sheet is visible inside or outside the completed lampshade.
The surface should remain consistent across the sheet so that illumination does not reveal unnecessary streaks, waves, surface contamination or inconsistent texture.
Material selection should consider thickness, opacity, color, surface finish, shade diameter, frame structure, printing or decoration process and the intended light source.
| Property | Specification |
|---|---|
| Product Name | Matte White Rigid PVC Lampshade Sheet |
| Material | PVC Based on LG or Formosa Resin with Processing Additives and MBS |
| Common Thickness | 0.3mm–0.5mm |
| Extended Thickness Range | 0.05mm–6.0mm Listed for Customized PVC Sheet Requirements; Suitability Should Be Confirmed for Lampshade Use |
| Available Width | 1300–1500mm or Customized |
| Standard Sheet Sizes | 700 × 1000mm, 915 × 1830mm, 1220 × 2440mm or Customized |
| Density | 1.36–1.42g/cm³ |
| Color | White, Colored or Customized |
| Surface | Matte or Glossy |
| Primary Surface for This Product | Matte |
| Main Application | Table Lamp Shades and Decorative Lighting |
| Processing | Cutting, Printing, Stamping, Forming and Suitable Welding Processes According to Selected Grade |
| Published Documentation | SGS and ISO 9001:2008 References |
| Minimum Order Quantity | 500kg |
| Payment Terms | 30% Deposit, 70% Balance Before Shipment |
| Delivery Terms | FOB, CIF, EXW, DDU |
| Published Delivery Time | 15–20 Days After Deposit, Depending on Order Requirements |
A matte finish reflects less direct surface glare than a glossy finish, which can be useful where the PVC backing is visible as part of the completed lampshade.
Consistent matte texture can help provide a more uniform appearance across lampshade panels, especially when the material is illuminated.
Suitable matte PVC grades can be evaluated for decorative printing. Ink adhesion, curing conditions and the final printed appearance should be tested with the actual material before repeated production.
White matte PVC can provide a clean interior finish for lampshades where a highly reflective glossy surface is not desired.
| Comparison | Matte PVC | Glossy PVC |
|---|---|---|
| Surface Reflection | Lower visible glare | More reflective appearance |
| Visual Effect | Soft, understated surface | Smooth, brighter surface appearance |
| Surface Marks | Matte texture can make some reflections less noticeable | Glossy surfaces can make reflections and some surface marks more visible |
| Printing | Should be tested with the selected ink system | Should be tested with the selected ink system |
| Typical Selection | Decorative shades requiring low-glare or satin-like backing | Applications requiring a smoother reflective finish |
Flatness is important for cutting, printing and forming lampshade panels. Buyers should inspect the material for waves, deformation and visible surface contamination according to their finished product requirements.
Rigid PVC provides structural support for suitable hard-backed lampshades while maintaining processability for forming and fabrication.
Consistent thickness helps provide repeatable stiffness and dimensional behavior across lampshade production runs.
Suitable PVC grades can support compatible printing methods for patterns, branding and decorative lighting designs.
White and customized colors can be discussed together with required thickness, width and sheet dimensions.
Suitable material can be cut, stamped, formed and processed according to the buyer's lampshade design and equipment.
Surface quality is particularly important for lampshade PVC because lighting can make waves, spots, streaks and inconsistent surface texture more visible.
The original product information emphasizes light transmittance, surface flatness and the absence of visible defects such as waves, fish eyes and black spots. These characteristics should be evaluated against the buyer's approved material reference and finished lampshade requirements.
The illuminated result also depends on PVC opacity, thickness, color, decorative covering, light source, shade diameter and the distance between the material and light source.
| Selection Factor | What to Consider |
|---|---|
| Lampshade Diameter | The sheet should bend to the required diameter while maintaining suitable support |
| Shade Height | Larger panels may require increased stiffness depending on frame design |
| Frame Support | Ring and wire configuration can affect the required rigidity |
| Curvature | Smaller diameters can require different forming characteristics |
| Printing | Thickness and surface should work with the intended printing method |
| Light Appearance | Thickness, color and opacity influence the illuminated appearance |
Matte rigid PVC can provide backing structure and a low-glare surface for hard-backed table lamp shades.
For larger floor lamp shades, material thickness should be selected according to panel height, diameter and frame support.
PVC sheet can be cut into suitable panels and formed into drum, cylindrical and other hard-backed lampshade structures.
Printable matte PVC grades can be evaluated for patterns, graphics and customized decorative lighting collections.
Matte lampshade material can be considered for suitable hotel, restaurant, retail and other decorative lighting fixtures where a softer surface appearance is preferred.
PVC Film for Table Lamp Shades
Matte PVC Sheet for Lighting
Custom PVC Lampshade Material
Rigid PVC Sheet for Decorative Lighting
Matte PVC Sheet for Table Lamps
PVC Sheet for Lighting Fixtures
For additional rigid PVC sheet materials and surface options, visit our PVC Sheet product range.
Check surface texture and reflection level against the approved lampshade design.
The common lampshade range is 0.3mm to 0.5mm. Select the appropriate thickness according to stiffness and forming requirements.
Inspect sheets for waves, distortion or other conditions that could affect printing, cutting and finished panel appearance.
For white or colored material, confirm the acceptable appearance against the buyer's approved reference.
Where printing is required, test the intended ink, printing method and curing conditions before repeated production.
Evaluate the material through the actual cutting, stamping or forming equipment used by the lampshade manufacturer.
Inspect shape retention, surface consistency, light appearance and compatibility with the intended frame and fixture.
The original product information references anti-UV, anti-oxidation and other processing additives intended to support material performance. Actual heat resistance, yellowing behavior and long-term appearance depend on the selected formulation, light source, operating temperature and finished fixture design.
The lampshade manufacturer should evaluate the selected PVC with the intended LED, bulb or other light source, including operating temperature, ventilation and distance between the light source and PVC material.
If a specific fire-performance, electrical, UV, chemical or temperature requirement applies, buyers should request applicable documentation for the selected material grade and verify the completed lighting product according to relevant market requirements.
Sample Packaging: The original product information references A4-size sheets packed in PP bags and cartons.
Sheet Packaging: The original information references approximately 30kg per bag, with final packaging confirmed according to sheet dimensions and order requirements.
Pallet Packaging: Published information references approximately 500–2000kg per plywood pallet. Actual weight depends on the confirmed sheet configuration.
Container Loading: The original product information references approximately 20 tons, while actual loading depends on sheet dimensions, pallets and applicable transportation limits.
Delivery Terms: FOB, CIF, EXW and DDU are listed options.
Published Lead Time: Approximately 15–20 days after deposit depending on the confirmed order requirements.
PVC Lampshade Sheet Packaging
Important purchasing criteria for matte PVC lampshade sheet include thickness consistency, surface flatness, matte texture consistency, color appearance, cleanliness, printability and forming performance.
The original product information references SGS and ISO 9001:2008 documentation. Buyers requiring specific material, chemical, fire-performance or other reports should confirm that the available documentation applies to the exact PVC grade being purchased.
HSQY Product and Quality Documentation
HSQY Plastic Group communicates with lighting manufacturers, plastic converters, distributors and international buyers through international business and exhibition activities.
HSQY Plastic Group International Exhibition Highlights
It is a rigid or semi-rigid PVC material with a low-gloss surface used to manufacture hard-backed lampshade panels.
Matte PVC has lower visible surface reflection, while glossy PVC provides a more reflective appearance. The appropriate finish depends on the lampshade design and desired illuminated effect.
The common HSQY lampshade range is approximately 0.3mm to 0.5mm. The appropriate thickness depends on shade dimensions, stiffness and forming requirements.
The product information lists widths of approximately 1300mm to 1500mm, with customized dimensions available for discussion.
Listed dimensions include 700 × 1000mm, 915 × 1830mm and 1220 × 2440mm, with customized sizes available.
Suitable grades can be used with compatible printing processes. Buyers should test ink adhesion, printing method and curing conditions before mass production.
Yes. Suitable PVC grades can be cut, stamped and formed according to the selected thickness and manufacturing equipment.
White, colored and customized options are referenced in the original product information. Final availability should be confirmed according to the selected thickness and quantity.
No. Matte describes the surface appearance. Self-adhesive describes an adhesive-backed construction. If an adhesive layer is required, the adhesive and release liner should be specified separately.
Suitability should be evaluated with the actual LED or other light source, operating temperature, ventilation and distance between the light source and lampshade material.
Fire behavior depends on the exact PVC formulation and test method. Where a specific fire-performance requirement applies, buyers should request applicable documentation for the selected material grade.
The detailed product information supplied for this page lists a minimum order quantity of 500kg. Customized colors or specifications should be confirmed separately.
The published product information references approximately 15–20 days after deposit, depending on the confirmed order requirements.
Please provide the required thickness, width or sheet size, matte or glossy finish, color, lampshade dimensions, printing or processing requirements, purchase quantity, packaging requirements and destination.
HSQY Plastic Group supplies PVC sheets and films, PET materials and other plastic products for lighting, printing, packaging and industrial converting applications.
For lampshade applications, buyers can discuss matte PVC thickness, width, sheet dimensions, color, surface finish and processing requirements according to their production needs.
Product Category
Let’s Find the Right Plastic Solution