High-Gloss 3-Layer Co-Extruded PVC Foam Board

HSQY high-gloss 3-layer co-extruded PVC foam board combines smooth co-extruded surface layers with a lightweight foamed PVC core for cabinets, furniture panels, decorative interior panels, displays and other fabricated applications where surface appearance is important.

The three-layer construction is designed around a foamed core positioned between co-extruded surface layers. Compared with a basic free-foam surface, this structure can provide a smoother and more finished exterior for visible furniture and decorative components.

For bulk purchasing, buyers should specify thickness, density, sheet size, gloss requirement, skin configuration, CNC processing, hardware, edge treatment and finished application before production.

3-Layer Co-Extruded PVC Foam Board Video

High-Gloss Co-Extruded PVC Board Images

High-Gloss 3-Layer PVC Foam Board Specifications

The following values are preserved from the current detailed product information. Because the online product card and detailed table contain different thickness ranges, confirm the exact commercial thickness and high-gloss co-extruded structure when requesting a quotation.

What Is 3-Layer Co-Extruded PVC Foam Board?

A three-layer co-extruded PVC foam board is produced with a foamed PVC core between co-extruded surface layers. The surface and core are formed as part of the board structure rather than being added later as a separate decorative film.

This layered construction allows the board to retain a lightweight cellular core while providing smoother outer surfaces for furniture, cabinets, interior decoration and display applications.

The exact surface-layer thickness, density and appearance can vary by specification. Buyers should therefore confirm the required skin structure and core density for the finished application.

Three-Layer Board Structure

Why Choose a High-Gloss Surface?

A high-gloss surface creates a bright, reflective appearance for visible cabinet doors, furniture panels, decorative interior panels and display components.

Where the co-extruded surface itself provides the required appearance, additional decorative finishing may be reduced for suitable projects. However, gloss consistency, surface defects, handling marks and color should be checked against an approved production sample.

If scratch or abrasion performance is important, request applicable information for the exact high-gloss grade rather than assuming every glossy surface provides the same resistance.

High-Gloss PVC Foam Board for Cabinet Doors

High-gloss co-extruded PVC board can be evaluated for cabinet doors and visible cabinet panels where a smooth reflective surface is part of the finished design.

Door applications should consider total thickness, density, panel dimensions, hinge type, screw locations and long-term flatness. Hardware should be tested using the actual production board before volume manufacturing.

High-Gloss PVC Board for Furniture Panels

Furniture manufacturers can evaluate three-layer co-extruded board for wardrobes, shelving systems, side panels, partitions, display furniture and other components where a smooth visible surface is required.

For furniture projects, specify whether the high-gloss surface will remain directly exposed or be further printed, painted, laminated, edge banded or mechanically processed.

Decorative Interior Panels

The glossy finished surface also makes the board relevant to interior decorative panels, wall features, partitions, reception areas and commercial display structures.

For large visible panels, buyers should confirm sheet flatness, surface consistency, joint layout, fixing method and lighting conditions because high-gloss surfaces can make reflections and surface variations more visible.

High-Gloss Board for Displays and Shop Fittings

Retail displays, exhibition furniture, counters and shop-fitting panels can use high-gloss PVC board where a bright finished surface and lightweight core are useful.

When the display will be frequently handled, define cleaning requirements, edge treatment, fastening and acceptable surface appearance during material approval.

CNC Routing, Cutting and Drilling

The original product information lists sawing, stamping, punching, die cutting, sanding, drilling, screwing, nailing and riveting as available processing methods.

For CNC fabrication, processing settings should consider the co-extruded surface layers and foamed core. Provide drawings, routing depth, groove dimensions, drilling positions, cut dimensions and tolerances when prefabricated panels are required.

Protect the high-gloss visible face during machining and handling where finished surface appearance is critical.

Screw Holding and Cabinet Hardware

The source information states that the board can be drilled and screwed. Actual screw performance depends on thickness, density, skin structure, screw geometry, pilot-hole size, insertion depth, edge distance and applied load.

For cabinet hinges, drawer slides and repeatedly loaded fasteners, test the intended hardware with the exact production-grade board before confirming bulk orders.

Edge Finishing and Edge Banding

Cutting or routing the panel exposes the internal foam-core structure at the edge. Visible furniture edges should therefore be planned as part of the finished product design.

If edge banding is required, confirm edge material, color, adhesive chemistry, processing temperature and finished appearance using the actual board before mass production.

Bonding and Further Surface Finishing

The original product information states that PVC foam board can be bonded using compatible PVC adhesives.

Where buyers intend to paint, print or laminate over the high-gloss surface, compatibility should be tested first because a glossy surface may require different preparation from a matte board.

High Gloss vs. Matte Co-Extruded PVC Board

Selecting Thickness and Density

The detailed source specification lists thicknesses from 1mm to 35mm and densities from 0.35 to 1.0g/cm³ across the broader PVC foam-board range.

High-gloss co-extruded applications should be specified using both thickness and density because thickness influences panel depth and span while density can influence weight, rigidity and machining behavior.

Reference Physical Properties

The following values are preserved from the original PVC foam-board physical-property table. They should be treated as family reference data unless confirmed for the exact high-gloss three-layer co-extruded grade.

Moisture Resistance

The current reference data lists water absorption at ≤1.5%, making moisture performance relevant to kitchen cabinets, bathroom cabinets and other interior applications.

Finished-system performance also depends on fasteners, joints, adhesives, edge treatments and other components. Wet-area applications should therefore be evaluated as a complete assembly.

Cleaning and Surface Care

High-gloss furniture surfaces are visually prominent, so cleaning and handling methods should be matched to the exact surface grade.

Before specifying cleaning chemicals for commercial interiors, cabinets or display fixtures, confirm compatibility with the production surface. Abrasive cleaning methods should not be assumed suitable without testing.

Heat and Fire Considerations

The source family data lists a Vicat softening point of 73–76°C and self-extinguishing behavior in less than five seconds.

Where a project requires a specific fire classification, flame-spread rating, smoke requirement or service-temperature limit, request documentation for the exact high-gloss co-extruded board being ordered.

Indoor and Outdoor Use

The broader source information includes both interior decoration and outdoor wall-board applications, but this high-gloss product is best evaluated primarily as a visible furniture and interior decorative panel.

For proposed exterior use, confirm UV stability, gloss retention, color stability, temperature cycling and expected service life for the exact formulation before specifying the board outdoors.

High-Gloss Co-Extruded PVC Board Applications

Application Images

How to Specify High-Gloss 3-Layer PVC Foam Board

PVC Foam Board SGS Document

The original product page provides the following PVC Foam Board SGS document. Confirm that the report applies to the exact high-gloss three-layer co-extruded structure, thickness and density required for your order.

Packaging and Commercial Information

Packaging: Plastic bags, cartons, pallets and kraft paper are listed in the original product information. High-gloss visible surfaces should be protected appropriately during handling and shipment.

MOQ: The detailed product specification lists a minimum order quantity of 3 tons.

Payment: T/T, L/C, D/P and Western Union are listed.

Delivery Terms: EXW, FOB, CNF and DDU are listed in the original FAQ.

Lead Time: The detailed table lists approximately 15–20 days after deposit. Because the older FAQ also contains a 10–14 working-day statement, confirm the current production schedule with the quotation.

Samples: Free samples are listed as available. Confirm the required thickness, density, high-gloss surface and express-freight arrangement.

Frequently Asked Questions About High-Gloss 3-Layer PVC Board

About HSQY Plastic Group

HSQY Plastic Group supplies PVC co-extrusion foam boards and other plastic sheet materials to cabinet manufacturers, furniture factories, interior fabricators, display manufacturers, distributors and industrial buyers.

For high-gloss three-layer projects, provide the required thickness, density, sheet size, surface appearance, application, CNC requirements, hardware and purchasing quantity so the appropriate production specification can be reviewed.

HSQY Qualification and Exhibition Information