Factory-direct plastic sheet solutions for global B2B buyers
About Us     Contact Us     Equipment     Our Factory     Blog     Free Sample
Please Choose Your Language
PVC strip curtain rolls and industrial warehouse production

INDUSTRIAL FLEXIBLE BARRIERS · B2B ROLL SUPPLY

PVC Strip Curtains & Flexible Door Strip Rolls for Industrial Openings

Specify clear, colored, low-temperature, ribbed or anti-insect PVC strip roll for warehouses, cold rooms, production areas and frequently used doorways.

Request a project quote Browse 8 products
1–4.5 mm thickness range 100–400 mm roll width range Smooth, ribbed and textured surfaces

QUICK ANSWER

What is a PVC strip curtain?

A PVC strip curtain is a flexible barrier made from overlapping vertical PVC strips. People, carts and suitable vehicles can pass through while the strips fall back into position, helping separate adjacent work zones without a rigid door cycle.

Selection depends on the opening size, minimum and maximum operating temperature, traffic type, visibility, wind or pressure difference, strip profile, strip width and thickness, overlap, mounting arrangement and cleaning requirements.

MATERIAL SELECTION

Match the strip roll to the operating environment

Start with temperature and traffic, then balance visibility, surface profile and barrier coverage. Confirm any special performance on the exact nominated grade.

01

Standard clear smooth

For general indoor openings, pedestrian access and areas where through-visibility is important.

Specify: opening size, traffic and desired overlap.
02

Ribbed surface

Consider for cart, pallet or forklift traffic where contact and surface wear are frequent.

Specify: vehicle type, frequency and impact pattern.
03

Low-temperature grade

For cold rooms, freezer doors, refrigerated storage and other low-temperature zones.

Specify: minimum operating temperature and dwell time.
04

Yellow anti-insect

For compatible food-handling, warehouse and agricultural openings where insect control is part of the brief.

Specify: indoor/outdoor position and hygiene routine.
05

Colored or safety zoning

Colored transparent or opaque strips can identify edges, lanes, restricted areas or visual zones.

Specify: color reference, transparency and placement.
06

Frosted, embossed or special-purpose

Alternative surfaces and project-specific formulations are available for defined requirements.

Specify: performance target, test method and documents.

CURRENT HSQY RANGE

PVC strip curtain roll shortlist

Eight products from the current HSQY category. Use the product link as the visual reference, then add your required strip dimensions, roll format and operating conditions.

Explore the complete PVC Strip Curtains category

APPLICATION ROUTING

Choose by opening, traffic and temperature

A strip curtain is a flexible barrier rather than an airtight powered door. Confirm whether the intended separation level and traffic pattern are appropriate for the site.

A1

Warehouses & loading areas

General openings used by pedestrians, pallet equipment or forklifts.

Confirm: opening height, traffic frequency, wind and visibility.
A2

Cold rooms & refrigerated logistics

Doorways between ambient, chilled or frozen zones and refrigerated vehicles.

Confirm: full temperature range, frost and traffic dwell time.
A3

Food handling & backrooms

Compatible processing, storage and retail backroom openings requiring easy access.

Confirm: cleaning chemicals, hygiene plan and required documents.
A4

Factory zoning & partitions

Flexible separation for production bays, dust-prone areas and controlled work zones.

Confirm: hazard, airflow, equipment path and special performance.

OPENING DESIGN CHECK

Strip width and overlap work as a system

Wider or thicker strips can suit taller openings and heavier traffic, while more overlap improves coverage but increases the force needed to pass through. Final sizing should be based on the actual opening and operating conditions.

01

Measure the clear opening

Record width, height, mounting position, floor level and nearby obstructions.

02

Map the traffic

Identify pedestrians, carts, forklifts, vehicle width and passage frequency.

03

Set the environment

Define temperature, wind, pressure difference, dust, insects and cleaning.

04

Confirm the supply scope

State roll stock, cut strips, punching and mounting hardware requirements.

Mounting rail position
Overlapping flexible strips
Provide opening width × height, traffic type, mounting method and desired barrier coverage.

RFQ SPECIFICATION GUIDE

What to send for an actionable quote

A complete project brief helps match the roll to the opening and avoids quoting an unsuitable strip configuration.

Published HSQY range: 1–4.5 mm thickness and 100–400 mm roll width. The current page lists 200 × 2 mm, 300 × 3 mm and 400 × 4 mm as regular sizes; confirm final availability.
RFQ field Information to provide Why it matters
Opening Clear width and height, interior/exterior position and mounting area Defines strip length, quantity and installation geometry
Traffic Pedestrian, cart, pallet jack, forklift or vehicle; size and frequency Influences width, thickness, profile and overlap
Temperature Normal, minimum and maximum temperature; chilled or frozen zone Determines whether a low-temperature grade is required
Environment Wind, pressure, dust, insects, UV exposure, cleaning and chemicals Identifies special-purpose and maintenance requirements
Strip Thickness, width, smooth/ribbed/other surface and color Sets the main material construction
Coverage Requested overlap or required balance of barrier and passage force Controls coverage, access and material consumption
Supply Roll length or weight, core ID, cut length, punching and hardware scope Matches installation and converting workflow
Commercial Quantity, destination, packing, labeling and required documents Allows relevant production and shipping planning

PROJECT WORKFLOW

From doorway data to approved strip roll

Use a staged selection process for new sites, low-temperature zones or high-traffic openings.

  1. 01
    Measure

    Record the opening, mounting area and obstructions.

  2. 02
    Define

    Share traffic, temperature and separation needs.

  3. 03
    Select

    Match grade, profile, strip dimensions and color.

  4. 04
    Sample

    Check clarity, flexibility, surface and handling.

  5. 05
    Approve

    Confirm roll format, inspection criteria and packing.

BUYER FAQ

PVC strip curtain sourcing questions

Direct answers for industrial buyers, cold-chain operators, distributors and installation contractors.

Ask a project-specific question

What are PVC strip curtain rolls used for?

They are cut into flexible strips and installed with overlap across doorways or openings. Typical uses include warehouses, cold rooms, refrigerated vehicles, production areas, clean zones, equipment access points and animal entrances. Suitability depends on the grade and installation design.

What sizes does HSQY list for PVC strip curtain rolls?

The current HSQY category states a thickness range of 1–4.5 mm and a roll-width range of 100–400 mm. It lists 200 × 2 mm, 300 × 3 mm and 400 × 4 mm as regular strip sizes. Confirm the final tolerance, roll length and availability with the quotation.

How do I choose between standard and low-temperature PVC?

Provide the normal, minimum and maximum operating temperatures and state whether the opening serves chilled or frozen storage. A low-temperature grade should be selected and validated when standard PVC may become too stiff for the required conditions.

What is the difference between smooth and ribbed strips?

Smooth strips prioritize a clear, easy-to-clean surface. Ribbed strips add raised surface features and are commonly considered where carts, pallets or forklifts contact the curtain frequently. Confirm profile availability for the selected dimensions.

How should I measure an opening for a strip curtain?

Record the clear opening width and height, the intended rail position, interior or exterior mounting, floor level, surrounding obstructions and available fixing area. Also provide the widest vehicle or load passing through the opening.

How much strip overlap should I specify?

Overlap is a project decision. More overlap generally increases barrier coverage but also adds material and passage resistance. Define the temperature or containment objective, traffic and opening height so the configuration can be assessed.

Are all PVC strip curtain grades suitable for food areas, welding or anti-static use?

No. These uses require application-specific formulations, testing and documentation. State the exact requirement and destination market in the RFQ, then request confirmation for the nominated grade before ordering.

START WITH THE OPENING

Need a PVC strip roll matched to your doorway?

Send the opening dimensions, traffic, temperature, required strip size, surface, color, overlap, quantity and destination.

Request a quotation Ask about sample availability Final suitability, supply scope and documentation are confirmed for the nominated grade and application.
START AN INFORMED RFQ

Let’s Find the Right Plastic Solution

Looking for plastic sheets, films, food packaging, or a customized solution? Tell us your material, size, quantity, and application requirements. Our team will help you select the right product and provide a competitive quote.
√  Application and conversion process
√ Thickness, width and roll format
√ Color, clarity and surface finish
√ Function, documents, quantity and destination
Request Our Best Quotation
Request Our Best Quotation

Our materials experts will help identify the right solution for your application, put together a quote and a detailed timeline.

HSQY-PLASTIC-GROUP-logo-white-transparent
E-mail: chenxiangxm@hgqyplastic.com

Plastic Sheet

Trays

Lidding Films

Support

© COPYRIGHT  2026 HSQY PLASTIC GROUP ALL RIGHTS RESERVED.