HI PS shit fɔ Vaykum Fɔm & Tɛmofɔmin

HI PS shit fɔ Vaykum Fɔm & Tɛmofɔmin

HSQY HIPS sheet matirial fɔ vaykum fɔm kɔmbayn impak rɛsistɛns, rigiditi ɛn gud fɔmabiliti fɔ trey dɛn , pak, aplayans layna, kɔva, haus, displei ɛn industrial tɛmfɔm kɔmpɔnɛnt dɛn.

High Impact Polystyrene, we dɛn kin shɔt as HIPS , na rɔba-modifyed polystyrene matirial we dɛn kin yuz bɔku bɔku wan fɔ vaykum fɔm ɛn thermoforming bikɔs i de gi prɛktikal balans fɔ tafnɛs, rigiditi, prɔsesin pefɔmɛns ɛn matirial kɔst.

Di prɔdak rɛnj we HSQY gɛt naw de kɔba lɛk 0.2mm to 6mm tik, wit we go rich 1600mm ɛn wayt, blak ɔ kɔstɔmayt kɔlɔ dɛn. Material selekshɔn fɔ bi bays pan fɔm dip, mold dimɛnshɔn, finish wɔl tik ɛn di rikwaymɛnt fɔ di fayn kɔmpɔnɛnt.

HIPS Vaykum Fɔm Shit Spɛsifikeshɔn dɛn

Spɛsifikeshɔn Notis: Fɔm pefɔmɛns dipen pan di ɛksaktɔl HIPS gred, sheet matirial tiknɛs, ɔt kɔndishɔn, mold jɔyometri ɛn finish-pat rikwaymɛnt. Faynal spesifikeshɔn dɛn fɔ kɔnfyus yuz di intended thermoforming ikwipmɛnt ɛn pat dizayn.

Wetin Na HIPS Vaykum Fɔm Shit?

HIPS vaykum fɔm sheet matirial na Ay Impɛkt Polistayn we dɛn de gi as flat sheet matirial ɔ fayn fɔm stok fɔ mek tri-dimɛnshɔnal plastic kɔmpɔnɛnt dɛn.

we di vaykum de fכm, dεn de hεt di sheet matirial te i bi sufayf pliable. Dɔn vaykum kin pul di tin we dɛn dɔn ɔt agens wan mold, usay i kin kol ɛn kip di shep we dɛn nid.

HIPS na yusful speshali we di komponɛnt we dɔn dɔn nid mɔ taf pas standad GPPS we stil nid ikɔnomik tɛmfɔmin, trim ɛn sɛkɔndari fabrikeshɔn.

Wetin Mek Dɛn De Yuz HIPS bɔku bɔku wan fɔ Vaykum Fɔm

• Gud fɔmabiliti: Dɛn kin fɔm fayn HIPS gred dɛn insay trey dɛn , layna, kɔva ɛn haus we yu de yuz kɔvɛnshɔnal tɛmfɔmin ikwipmɛnt.

• Impruv impak resistans: Rɔba modifyeshɔn de gi big tafnɛs pas standad GPPS .

• Yuzful rigiditi: Fɔm pat dɛn kin mentɛn yusful strɔkchɔral stiffness we dɛn pik di aprɔpriet statin gej.

• Ikonomik prɔsesin: HIPS na wan we dɛn kin pik bɔku bɔku wan fɔ ay-volyum fɔm prodak usay matirial ɛn prɔsesin kɔst impɔtant.

• I izi fɔ trim ɛn mek: Dɛn kin kɔt di pat dɛn we dɔn dɔn, drɔl dɛn, rout dɛn ɛn mek dɛn mashin bay we dɛn yuz di rayt tul dɛn.

• Surface options: Yu kin tink bɔt wayt, blak, kɔstɔm kɔlɔ ɛn difrɛn surface finish akɔdin to di aplikeshɔn.

• Printable ɛn paintable: Suitabl surfaces kin sɔpɔt printin, labeling, painting ɛn decorative finishing afta kompitibiliti testing.

Vaykum Fɔm vs. Tɛrmofɔmin

Tεmכfכm na di brayt prכsεs fכ hεt tεmכplastik sheet matirial εn shep am to tri-dimεnshכnal kכmכpכnt. Vaykum fכm na wan pan di mכst kכmכn tεmכfכm mεtכd dεm.

Aw fɔ Pik HIPS Tiknɛs fɔ Vaykum Fɔm

Fɔ stat sheet matirial tik na wan pan di impɔtant tin dɛn fɔ bay bikɔs di matirial kin tan as i de strɛch oba ɔ insay di mold.

Dɛn rɛnj ya na jenɛral sɛlɛkshɔn dairekshɔn pas fiks aplikeshɔn limit. Wan smɔl dip-drɔ kɔmpɔnɛnt kin nid fɔ gɛt tik statin sheet matirial pas wan bɔku bɔku shalɔ kɔmpɔnɛnt.

Ki Vaykum Fɔm Paramita dɛn

Wan vaykum-fɔmin sheet matirial nɔ fɔ pik yuz tiknɛs nɔmɔ. Mold jɔyometri ɛn prɔsesin kɔndishɔn dɛn kin inflɔws di kɔmpɔnɛnt we dɔn dɔn dairekt wan.

Wall Tiknes Distribushɔn Afta Vaykum Fɔm

Di tiknes we dɛn print pan wan HIPS sheet matirial spɛsifikɛshɔn de diskrayb di ɔrijinal flat sheet matirial . I nɔ de ripresent di tik we ɛvri eria na di kɔmpɔnɛnt we dɔn fɔm we dɔn fɔm.

As HIPS de stret insay wan mold, di matirial de ridistribut. di kכna dεm, dip sayd wכl dεm εn di εria dεm we de fa frכm di כrijinal sheet matirial plen kin tכn bכku bכku wan.

We di minim tik na di wɔl rili impɔtant, di wan dɛn we de bay fɔ gi di finish-pat rikwaymɛnt ɛn evalyu di sɛmpul dɛn we dɛn prodyuz pan di mold we dɛn want pas fɔ spɛsifa di ɔrijinal sheet matirial gej nɔmɔ.

Ridyus Webbing We Dɛn De Fɔm Vaykum

wεb de apin we fold dεm we dεn nכ want de fכm bitwin di mכld fכm dεm כ di kכva dεm. I de inflɔws bay mold spɛshal, sheet matirial tɛmpracha, sheet matirial sag, drɔ jɔyometri ɛn fɔm tɛknik.

If wan kɔrɛnt prodak ɛkspiriɛns wɛb, gi di mold drɔin, sheet matirial tik, kaviti spɛshal ɛn foto dɛn fɔ di pat we dɛn fɔm we yu de tɔk bɔt matirial sɛlɛkshɔn. Di chenj we dɛn kin chenj di tin dɛn nɔmɔ nɔ kin sɔlv prɔblɛm we gɛt fɔ du wit mold ɔ ɔt.

HI PS shit fɔ Pakɛj Trey & Insɛt

HIPS kin bi vaykum fכm insay protεktiv trey dɛn , insεt, kכmכpכnt hכlda εn כda rigid pak strכkchכ dεm usay tכf, rigiditi εn ikonomik fכm imכtant.

Fɔ pak projɛkt, spɛsifa di kaviti saiz, nɔmba fɔ di kaviti, di prɔdak wet, di stak bihayvya we dɛn nid ɛn di minim finish wɔl tik.

Fɔd, famasi, mɛdikal ɛn ESD-sɛnsitiv pak nid fɔ gɛt aplikeshɔn-spɛsifi k matirial gred ɛn di rayt dɔkyumentri. Standard HIPS nɔ fɔ ɔtomɛtik wan asum se i fayn fɔ dɛn rigyuleted aplikeshɔn ya.

HI PS shit fɔ Aplayans Layna & Kɔmpɔnɛnt dɛn

HIPS na tin we bɔku pipul dɛn kin tink bɔt fɔ frij layna, aplayans intɛriɔ, kɔva, haus ɛn trey dɛn bikɔs fayn gred dɛn kin kɔba thermoforming kapabiliti wit yusful rigiditi ɛn impak rɛsistɛns.

Di wan dɛn we de mek aplayans fɔ spɛsifa di fɔm dip, ɔpreshɔn tɛmpracha, ditajɛn ɔ kemikal ɛksplɔshɔn, kɔlɔ, sɔfayz finish ɛn di mɛkanikal pefɔmɛns we dɛn nid we dɛn de ɛvaluet wan HIPS gred.

HI PS shit fɔ Ikwipmɛnt Kɔva & Hausin

Midul ɛn ebi-gɛj HIPS kin fɔm vaykum insay kɔva, haus ɛn protɛktiv ɛnklɔzhɔ fɔ ikwipmɛnt usay lɔw wet, apinans ɛn ikɔnomik prodakshɔn impɔtant.

Finished-part suitability fɔ bi evaluate akɔdin to di dimɛnshɔn, impak rikwaymɛnt, fastening pɔynt, unsupported span ɛn opareshɔn kɔndishɔn.

HI PS shit fɔ POP Displei & Sayn

Vaykum fɔm de alaw HIPS fɔ kɔnvɔyt to tri-dimɛnshɔnal displei kɔmpɔnɛnt, branded panɛl, prodak stand, sayn ɛn rital fiks.

Dɛn kin print, peint ɔ dɛkɔret bak we fit HIPS sɔfays afta dɛn dɔn fɔm. Printin ɔ kɔtin adheshon fɔ verify yuz di aktual sheet matirial gred ɛn finish surface.

HI PS shit fɔ Protɔtayp & Mɔdel Mek

HIPS yusful fɔ protɔtayp vaykum fɔm bikɔs sheet matirial s kin ɔt, fɔm, trim, drɔ, bon ɛn peint yuz kɔmɔn fabrikeshɔn tɛknik.

Prototype forming de alaw manifakta dɛn bak fɔ evaluate mold geometry, wall-thickness distribution ɛn pat rigidity bifo dɛn kɔmit to big prodakshɔn kwantiti.

Wait vs. Blak HIPS fɔ Vaykum Fɔm

HIPS vs. GPPS fɔ Vaykum Fɔm

HIPS vs. ABS fɔ Vaykum Fɔm

Sheet Surface & Finished-Pat Apin

Surface finish imכtant biכs di apinεns fכ di כrijinal sheet matirial infכmeshכn di apinεns fכ di fכm kכmכpכnt.

Glos, mat, smol ɔ aplikeshɔn-spɛsifi k sɔfays dɛn fɔ spɛsifa bifo dɛn prodyuz. Fɔ ɔt ɛn strɛch kin chenj di glos ɛn tɛkstɔr, so dɛn fɔ gri fɔ mek i luk bay we dɛn yuz wan ripɔt we dɛn dɔn fɔm sɛmpul usay di kwaliti fɔ kɔsmɛtik impɔtant.

Trimming & Sɛkɔndari Fabrikeshɔn

Afta we di vaykum dɔn fɔm, nɔmal wan nid fɔ trim di tin we pasmak frɔm di pat we dɔn dɔn. HIPS kin prosɛs yuz fayn trim, kɔt, routin, drɔlin, panch ɛn CNC mashin we dɛn de yuz.

Tulin ɛn prɔsesin kɔndishɔn dɛn fɔ pik akɔdin to sheet matirial tik ɛn pat jɔyometri fɔ gɛt klin edj dɛn we nɔ gɛt bɔku ɔt ɔ mɛkanikal strɛs.

Laser prɔsesin kin pɔsibul fɔ sɔm sɛlɛkɛt polisitayn aplikeshɔn wit fayn ikwipmɛnt ɛn ventileshɔn, bɔt prɔses fit, fum, edj kwaliti ɛn wokples rikwaymɛnt fɔ validet bifo prodakshɔn.

Printin, Peint & Dekorashɔn Afta Fɔm

Suitabl HIPS kכmכpכnt dεm kin print, peint, lεbul, bכnd כ laminεt afta dεn fכm usay di mεtirial εn sεf we dεn sεlekt kכmpatibl wit di dכwnstrim prכsεs.

If yu nid fɔ print ɔ kɔt, sho if dɛkɔreshɔn de apin bifo ɔ afta fɔm bikɔs we yu strɛch kin afɛkt di grafik dɛn we dɛn print, di glos ɛn di we aw di say we dɛn de.

Indoor & Outdoor Aplikeshɔn dɛn

Standard HIPS na in dɛn kin yuz mɔ na indo ɔ kɔntrol aplikeshɔn pas nɔmɔ dɛn dɔn fɔmulayt di gred we dɛn dɔn pik ɛn tɛst fɔ ɛkstend ɔda ɛksplɔshɔn.

Di kɔmpɔnɛnt dɛn we de na do fɔ spɛsifa di san layt we dɛn nid, di UV we dɛn nid, di tɛmpracha rɛnj, di savis layf we dɛn nid ɛn di we aw dɛn de op fɔ luk bifo dɛn pik di matirial.

Us Infɔmeshɔn Yu Fɔ Gi fɔ Vaykum Fɔm Kɔt?

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt HIPS Vaykum Fɔm Shit

Wetin na HIPS ?

HIPS tinap fɔ Ay Impɛkt Polistayn. Na rɔba-modifyed polystyrene we dɛn mek fɔ gi big tafnɛs pas standad GPPS we i de kɔntinyu fɔ izi fɔ thermoform ɛn fabricate.

HIPS fit fo vaykum fom?

Yɛs. Vaykum fכm na wan pan di mεjכr kכmεshכnal aplikεshכn dεm fכ HIPS . Fɔm pefɔmɛns dipen pan gred, tik, ɔt, mold jɔyometri ɛn fɔm dip.

Us tiknes HIPS sheet matirial HSQY de saplae?

Di kɔrɛnt prodakt spɛsifikɛshɔn kɔba lɛk 0.2mm to 6mm. Dɛn fɔ kɔnfyus di rayt we aw i de akɔdin to di wit, di kɔlɔ ɛn di we aw dɛn yuz am.

Wetin na di maksimal HIPS sheet matirial wit?

Di kɔrɛnt prodakt spɛsifikɛshɔn de list di wit dɛn we go rich lɛk 1600mm.

Us kɔlɔ dɛn de?

Di prɔdak rɛnj we de naw gɛt wayt, blak ɛn kɔstɔmayt kɔlɔ dɛn. Faynal avaylabl dipen pan di gred we yu dɔn pik ɛn di prodakshɔn spɛsifikɛshɔn.

Us HIPS tiknes bεst fכ vaykum fכm?

No universal bɛst tik nɔ de. Di kɔrɛkt statin gej dipen pan di mold dimɛnshɔn, fɔm dip, drɔ rɛsɛshɔn ɛn di minim wɔl tiknɛs we dɛn nid pan di kɔmpɔnɛnt we dɔn dɔn.

HIPS kin tint we di vaykum de fom?

Yɛs. di sheet matirial de strεch we i de fכm, so di kכna dεm εn dip sayd wכl dεm kin tכn pas di כrijinal statin gεj.

Wetin kin mek wɛb de we di vaykum de fɔm?

wεb kin infכmeshכn bay mold jכmetri, klos spεs kεviti, pasmak sheet matirial sag, hεt kכndishכn εn fכm tεknik. Material selekshɔn na jɔs wan pat fɔ kɔntrol wɛb.

Yu kin yuz HIPS fɔ dip-draw vaykum fɔm?

HIPS kin evaluate fכ dip-drכ kכmכpכnt dεm, bכt di wכl-tiknes distribushכn de bi imכtant imכtant as fכm dip de inkrεs. Provayd di mold dimɛnshɔn ɛn rikwayd minim finish tik fɔ evalueshɔn.

Yu kin yuz HIPS fɔ pak trey dɛn ?

Yɛs. HIPS kin bi vaykum fכm insay pak trey dɛn εn insεt. Aplikeshɔn dɛn we gɛt fɔ du wit it, mɛrɛsin prɔdak, famasi ɔ ESD-sɛnsitiv ilɛktroniks nid fɔ gɛt di rayt gred ɛn dɔkyumɛnt.

Yu kin yuz HIPS fɔ frij layna?

HIPS na wan we dɛn kin yuz bɔku bɔku wan fɔ aplayans ɛn frij layna aplikeshɔn. Eksakt suitabiliti dipכnt pan fכm pכrfomans, tεmprachכ, kεmikכl εkspכzכn εn di mεtirial gred we dεn nid.

Wetin na di difrɛns bitwin HIPS ɛn GPPS fɔ vaykum fɔm?

HIPS na nכmal opεk εn i de gi big impak tכf. GPPS na nכmal wan klia εn glos bכt kכmparativ brit, so i mכr aprכpriet usay transparency na prayoritεt.

Wetin na di difrɛns bitwin HIPS ɛn ABS fɔ thermoforming?

HIPS na kɔmɔn we dɛn kin pik fɔ ikɔnomik tɛmɔfɔm prodakt dɛn. ABS na tipikli evaluet usay difrɛn balans fɔ impak, ɔt rɛsistɛns ɛn injinɛri pefɔmɛns nid fɔ de.

Yu tink se HIPS kin print afta dɛn dɔn fɔm?

Dɛn kin print ɔ dɛkɔret fayn fayn HIPS sɔfays dɛn afta dɛn dɔn fɔm. Ink adheshon, surface finish en curing kondishon dem shud test yuz di finished component.

Yu kin yuz HIPS na do?

Standard HIPS na fɔ indo aplikeshɔn dɛn fɔs. Di prɔjek dɛn we de na do fɔ sho wetin dɛn nid fɔ du UV, wɛda ɛn savis-layf bifo dɛn pik wan gred.

Yu kin yuz standad HIPS fɔ sterilizebl mɛdikal trey dɛn ?

Standard industrial HIPS nɔ fɔ ɔtomɛtik trit am as i fayn fɔ sterilayz ɔ fɔ yuz am na mɛrɛsin. Medikal projɛkt dɛn fɔ difayn di sterilayzeshɔn we, di rigyuletɔri rikwaymɛnt ɛn matirial dɔkyumentri bifo dɛn pik wan gred.

Us infɔmeshɔn a fɔ gi fɔ kot?

Duya gi di aplikeshɔn we dɔn dɔn, sheet matirial tik, waid ɛn lɔng, kɔlɔ, sɔfa finish, mold dimɛnshɔn, fɔm dip, minim finish wɔl tik, mashin infɔmeshɔn, kwantiti ɛn ples fɔ go.

Pak & Delivri fɔ di wok

HIPS we de mek sheet matirial s fɔ protɛkt akɔdin to sheet matirial saiz, tik ɛn sɔfayz rikwaymɛnt fɔ ridyus skrach, kɔntaminɛshɔn, ed damej ɛn muvmɛnt we dɛn de transpɔt.

HSQY Plastik Grup Ɛgzibishin dɛn

HSQY Plastik Grup kin mit tɛmfɔma, pak manifakta, aplayans prodyusɔ, distribyushɔn ɛn ɔda plastic- sheet matirial bayer dɛn na intanashɔnal industri ɛgzibishin.

Sɛtifiket dɛn & Dokumɛnt dɛn

Dɛn fɔ kɔnfyus di sɛtifiket dɛn we de ɛn di tɛknikal dɔkyumentri fɔ di rayt HIPS gred, tik ɛn di aplikeshɔn we dɛn bin want fɔ yuz bifo dɛn gri fɔ di ɔda.

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae HIPS , GPPS ɛn ɔda plastic sheet matirial matirial fɔ vaykum fɔma, tɛmmofɔma, pak manifakta, aplayans manifakta, displei prodyusɔ ɛn industrial fabricatɔ. Dɛn kin tɔk bɔt di tik we di shit tik, di dimɛnshɔn, di kɔlɔ, di say we i de ɛn di tin dɛn we dɛn nid fɔ mek fɔ mek am akɔdin to di prɔjek.

Polistayn Sheet Diskripshɔn

Polistayn ( PS ) sheet matirial na wan tɛmplastik matirial ɛn na wan pan di plastic dɛn we dɛn kin yuz mɔ. I gɛt fayn fayn ilɛktrik ɛn mɛkanikal prɔpati dɛn, gud prɔsesabiliti ɛn i de insay difrɛn kɔlɔ dɛn. High Impact Polystyrene ( HIPS ) sheet matirial na wan taf, lɔw kɔst plastic we izi fɔ mek ɛn thermoform. Bɔku tɛm dɛn kin yuz am na aplikeshɔn usay dɛn nid ay impak rɛsistɛns ɛn prɔsesabiliti pan afɔdabul prayz.       

HSQY Plastic in ɛkspɛriɛns pan plastic matirial na wan pan di sɔlvishɔn dɛn we wi de gi wi kɔstɔma dɛn. Wi de saplae di bes en widest renj of polystyrene pan di most kompititiv prais. Sheb yu polystyrene nid wit wi ɛn togɛda wi kin pik di rayt sɔlvishɔn fɔ yu aplikeshɔn.   

Polistayn Shit Spɛsifikeshɔn dɛn

Ficha fɔ Polistayn Shit

High Impact Resistans we gɛt ay impak : . 

PS shit enhans wit rɔba modifya, HIPS sheet matirial s tinap fɔ shɔk ɛn vaybreshɔn we nɔ krak, we pas standad polistayn.  

I izi fɔ mek am : . 

PS sheet matirial na kompitibul wit laser kot, day-kat, CNC mashin, thermoforming, ɛn vaykum fɔm. Dɛn kin glu am, peint am, ɔ print am na skrin. 

Laytwɛt & Rigid : . 

PS sheet matirial de kɔba lɔw wet wit ay stiffnɛs, we de ridyus transpɔt kɔst we i de mentɛn strɔkchɔral pefɔmɛns.

Kεmikכl & Mɔstɔ Rεsistεns : . 

I de gens wata, diluted asid, alkali, ɛn alkol, we de mek shɔ se i liv lɔng na say dɛn we wet ɔ we nɔ de rɔtin.

Smooth Surface Finish we yu de yuz : . 

PS sheet matirial s are Ideal fɔ ay kwaliti printin, lɛbl, ɔ lamin fɔ brand ɔ aesthetic purposes.

Aplikeshɔn fɔ Polistayn Shit

• Pakɛj : Protɛktiv trey dɛn , klamshɛl, ɛn blista pak fɔ ilɛktronik, kɔsmɛtik, ɛn it kɔntena.

• Sayn ɛn Displei : Layt wet rital sayn, pɔynt-ɔf-pɔch (POP) displei, ɛn ɛgzibishin panɛl dɛn.

• Ɔtomotiv Kɔmpɔnɛnt dɛn : Trim insay, dashbɔd, ɛn kɔva dɛn we de protɛkt.

• Kɔnsuma Guds : Frij layna, tɔys pat, ɛn os fɔ tin dɛn fɔ yuz na os.

• DIY & Prototyping : Model-making, skul projɛkt, ɛn kraft aplikeshɔn bikɔs i izi fɔ kɔt ɛn shep.

• Medikal & Indastrial : Sterilizable trey dɛn , ikwipmɛnt kɔva, ɛn nɔ-lod-bearing kɔmpɔnɛnt dɛn.

  
  

PAKCING FƆ DU

SHO

SƐTIFIKƐSHƆN