Mat PET shit

Matte PET shit ɛn Film Manufacturer

HSQY PLASTIC de mek ɛn saplae mat PET shit ɛn mat PET fim fɔ print, fɔlding bɔks, steshɔnari, vaykum fɔm, tɛmfɔmin, pak, displei kɔmpɔnɛnt ɛn industrial kɔnvɔyt aplikeshɔn.

Dɛn kin kɔl am bak mat PET shit, mat polyɛsta shit, mat PET film ɔ mat polyɛsta film , dis PET matirial gɛt wan lɔw-glɔs, frɔst ɔ fayn fayn tɛkstɔr sɔfays we de ridyus strɔng riflekshɔn dɛn we pɔsin kin si ɛn i kin mek i luk saf pas kɔvɛnshɔnal glos PET .

HSQY de saplae ɔl tu di tin mat PET film ɛn tik sɛmi-rigid ɔ rigid PET shit prodak dɛm. di prodak famili dεm we de naw inklud tin mεtirial dεm frכm lεk 50–400 μm εn tik-gεj mat PET shit εn rol prodakt dεm frכm lεk 0.18–1.2 mm . Eksakt tiknes avaylabl, tolerans ɛn surface finish fɔ kɔnfyus akɔdin to di prodak ɛn aplikeshɔn we yu dɔn pik.

Wetin Na Mat PET shit ?

Mat PET shit na polyethylene terephthalate matirial wit low-glos, frosted ɔ texture surface instead of di ayli polish apinans we dɛn kin si pan kɔvɛnshɔnal glossy PET .

di mat surface de difyuz riflekt layt, we de mek wan soft vijual apinans en jεnarali de mek finga prεnt, sכm sכm hεndlin mak dεm εn sכm sכm sכfayz impεrfεkshכn dεm less visible pas pan wan hεli polish surface.

Dipen pan tik ɛn di we aw dɛn mek am, dɛn kin gi mat PET as fleksibul film, sɛmi-rigid shit, rigid shit, flat kɔt shit, rol ɔ slit rol.

Mat PET shit vs. Mat PET Fim

Di wan dɛn we de bay kin yuz di wɔd dɛn 'matte PET sheet' ɛn 'matte PET film' fɔ chenj, bɔt dɛn kin mek dɛn matirial ya fɔ rili difrɛn kɔnvɔyt prɔses.

Ficha	Mat PET shit	Tin Mat PET / BOPET film
Tipik Tiknɛs	kכmכn HSQY tik-gεj rεnj de aprכksimatli 0.18–1.2 mm	Spɛsifi k am fɔs insay maykron fɔ fleksibul-film aplikeshɔn dɛn
Mɛkanikal Biɛvhɔ	Semi-rigid to rigid dipen pan di tik	Tin ɛn i kin chenj chenj
Tipik Prɔsesin	Print, day kɔt, skɔ, fold, tɛmɔfɔm ɛn vaykum fɔm	Wɛb printin, lamineshɔn, kɔtin, ɔt transfɔm, mɛtalayz ɛn fleksibul pak
Tipik Aplikeshɔn dɛn	Fɔlding bɔks, binding kɔva, steshɔnari, displei ɛn fɔm pak	Lebul, lamination, fleksibul pak, ɔt-transfa printin ɛn spɛshal kɔnvɔyt

We dɛn de aks fɔ kot, di wan dɛn we de bay fɔ spɛsifa di tik we dɛn nid insay milimita ɔ maykron togɛda wit di fayn manufakchurin prɔses so dat HSQY go rɛkɔmɛnd di aprɔpriet PET prodak famili.

Matte PET shit Spɛsifikeshɔn dɛn

Sɔntin	Mat PET shit / Mat PET Film / Mat Polistɛr Shit
Tin dɛn	Polietilen Tɛriftalat ( PET ) .
Tin-Film Prodakt Rɛnj	sεlekt prodakt dεm we de arawnd 50–400 μm; kɔnfɔm bay prodak mɔdel
Tik-Gɛj Prodakt Rɛnj	aprכksimatli 0.18–1.2 mm fכ di kכrant mεnstrim tik-gεj prodakt dεm
Standart Shit Sayz dɛn	610 × 610 mm, 700 × 1000 mm, 915 × 1220 mm, 915 × 1830 mm, 1220 × 2440 mm ɛn ɔda saiz dɛn we de
Rol Width we yu de yuz	aprכksimatli 110–1280 mm fכ sεlekt kכrant prodakt dεm; kɔstɔm slitin we de ɔnda di prodakshɔn rikwaymɛnt dɛn
Fɔm fɔ di Sapɔt	Flat sheet, kɔt sheet, rol ɛn slit rol
Sho	Mat, frɔst, lɔw-glos, fayn mat ɔ kɔs mat akɔdin to di prɔdak
Mat Kɔnfigyushɔn	Singl-sayd mat, dabl-sayd mat ɔ kɔstɔm sɔfa kɔmbaynshɔn we dɛn kin kɔnfɔm
Aw a luk	Transparent, translucent ɔ kɔstɔmayz kɔlɔ akɔdin to fɔmyulashɔn ɛn sɔfays
Tik	aprכksimatli 1.35 g/cm3 fכ sεlekt kכrant prodakt dεm; fainal valyu dipכnt pan fכmyuleshכn
Di we aw dɛn de du di wok	Print, day kɔt, slit, skɔ, fold, vaykum fɔm, tɛmfɔmin ɛn laminɛshɔn
Kastom Opshɔn dɛn	Tik, waid, sheet saiz, rol wit, kala, mat apinans, surface tritment en protektiv film

Ki Bɛnifit dɛn fɔ Mat PET shit

Low-Gloss Appearance: Di mat surface de ridyus strכng spεkulכr riflεkshכn dεm εn de mek wan sכft vishכnal finish pas polish glossy PET .

Premium Packaging Apparance: Frosted ɛn mat surface kin gi difrɛn prɛzɛntɛnshɔn fɔ folding bɔks, steshɔnari, print grafik ɛn branded pak.

Ridyus Visibiliti fכ Finga Prεnt: Sכm sכm hεndlin mak dεm εn finga prεnt dεm jεnarali nכ kin notis pan mat tεkschuכr pas pan wan hεli polish klia PET sεf.

Gud Dimɛnshɔnal Stebiliti: Di ​​rayt PET gred dɛn de gi prɛktikal stiffnɛs ɛn dimɛnshɔnal stebiliti fɔ print, kɔt, fɔl ɛn mek plastic pat dɛn.

Printin Kapabiliti: Print-kɔmpatibl gred dɛn kin sɔpɔt skrin printin, UV printin ɛn sɔm ɔfset printin prɔses dɛn we dɛn dɔn pik afta dɛn dɔn kɔnfyus di aprɔpriet sɔfa ɛn ink sistem.

Kɔnvɔyt Kapabiliti: Dɛn kin day kɔt, slit, skor, fold, fɔm vaykum ɛn thermoformed fɔ difrɛn pak ɛn industrial aplikeshɔn dɛn we fit gred dɛn.

Kastɔm ​​Sapɔt: HSQY kin tɔk bɔt kɔstɔm tiknɛs, shit dimɛnshɔn, rol wit, mat tɛkstɔr, kɔlɔ ɛn sɔfayz kɔnfigyushɔn akɔdin to B2B prɔjek rikwaymɛnt.

Mat PET vs. Anti-Glare Had-Kɔt PET

Standart mat PET ɛn optik-grɛd anti-glɛya had-kɔt PET nɔ fɔ ɔtomɛtik trit lɛk di sem prɔdak.

Ficha	Standart Mat PET	Spɛshal Anti-Glɛr / Had-Kɔt PET
Men Pɔpɔshɔn	I tan lɛk se i nɔ gɛt bɔku glos ɔ i gɛt frɔst	Kontrol optik glare plus aplikeshɔn-spɛsifi k fɛnshɔnal pefɔmɛns
Sho	Mat ɔ tɛkstɔr PET sɔfays	Speshal funkshɔnal kɔtin ɔ injinɛri hadkot
Skrat / Abrashɔn Pɔfɔmɛnshɔn	Dipen pan PET gred, sɔfa ɛn opshɔnal kɔtin	I kin spɛshal ɛnjɛnɛri ɛn tɛst fɔ abrashɔn rɛsistɛns
Tipik Aplikeshɔn dɛn	Pakɛj, printin, steshɔnari, foldin bɔks ɛn jenɛral displei aplikeshɔn dɛn	Displei ɔvlay, tɔch intafɛs, kɔntrol panɛl ɛn spɛshal optik aplikeshɔn dɛn

If yu projɛkt nid fɔ gɛt difayn glos valyu, haz, optik klia, pensil hadnɛs, abrashɔn rɛsistɛns ɔ anti-glare pefɔmɛns, inklud di tɛst we dɛn nid ɛn di target valyu dɛn na yu inkwyuiz instead fɔ spɛsifa ɔl 'matte PET .'

Aplikeshɔn fɔ Mat PET shit ɛn Film

Matte PET shit fɔ Print

Print-kompatibl mat PET shit kin yuz fɔ skrin-printed grafik, UV-printed kɔmpɔnɛnt, prɔmoshɔnal matirial, lɛbl, pak ɛn dɛkɔretiv panɛl.

di ink adheshon dipכnt pan PET sכfayz εnεji, mat tεkschuכr, ink kεmεstri, kכndishכn dεm we de kכri εn eni korona כ kεmikכl tritmεnt. Di wan dɛn we de bay fɔ gi dɛn printin prɔses bifo dɛn ɔda prodakshɔn matirial.

Matte PET shit fɔ Folding Bɔks dɛn

Mat PET kin day kɔt, skor ɛn fold insay translucent folding bɔks, pak sliv, gift pak, klos bɔks ɛn ɔda rital pak kɔmpɔnɛnt dɛn.

Tiknɛs, kris dip, fɔlding rayus ɛn matirial dairekshɔn fɔ ɔptimayz akɔdin to bɔks dimɛnshɔn ɛn prodak wet fɔ ridyus spring-bak, waytin ɔ krak.

Matte PET shit fɔ Steshɔnari

Tipik steshɔnari aplikeshɔn dɛn na binding kɔva, notbuk kɔva, fɔlda, divayda, mɛnyu kɔva, dɔkyumɛnt kɔva, kraft shit ɛn print protɛktiv kɔva.

Mat PET kin gi wan subdued apinans we i de mεnten yusful stiffness εn mכsich rεsistεns fכ frεkuεnt hεndlεd stεshכnal prodakt dεm.

Matte PET shit fɔ Tɛmofɔmin

Suitabl mat PET gred dεm kin vεkyum fכm כ tεmכfכm insay pak trey, kכva, insεt εn shep plastic kכmכpכnt dεm.

Hɛt ɛn strɛch kin chenj mat tɛkstɔr, haz ɛn lokal wɔl tik, so fɔm pefɔmɛns fɔ evalyu yuz di aktual mold, drɔ rɛshɔn, ɔt saykl ɛn kol kɔndishɔn.

Matte PET fɔ Displei ɛn Dɛkɔretiv Aplikeshɔn dɛn

Mat PET kin yuz fɔ displei insɛt, pɔynt-ɔf-pɔch panɛl, prɔmoshɔnal grafik, sayn, dɛkɔretiv shit ɛn translucent kɔmpɔnɛnt usay dɛn kin lɛk fɔ luk we nɔ gɛt bɛtɛ glos.

Matte PET fɔ Indastrial Aplikeshɔn dɛn

Dɛn kin yuz PET matirial dɛn fɔ protɛktiv shit, sɛparatɔ, ɔvlay ɛn ɔda fabricated industrial components.

If ilɛktrik insuleshɔn, kemikal rɛsistɛns, tɛmpracha pefɔmɛns ɔ ɔda sɛtifiket industrial prɔpati nid fɔ de, di rilevɛns PET gred ɛn tɛst we fɔ spɛsifa bifo dɛn pik di matirial.

Aw fɔ Pik Mat PET shit Tiknɛs

Di kɔrɛkt tiknɛs dipen pan stiffness, prodakt dimɛnshɔn, printin we, folding dizayn, fɔm dip ɛn las yus. Di rεnj dεm we de kam biεn na jεnarכl sεlεkshכn dεyshכn pas fiks εnjinia spεsifikεshכn.

Tiknɛs Rɛnj	Jɛnɛral Karakta	Tipik Aplikeshɔn dɛn
50–180 μm	Tin ɛn i kin chenj chenj	Selekt printin, pak, protɛktiv-film ɛn fleksibul kɔnvɔtin aplikeshɔn dɛn
0,18–0,30 mm	I layt ɛn i nɔ kin izi fɔ chenj	Binding kɔva, divayda, ɔvlay, laytwɛt pak ɛn smɔl folding kɔmpɔnɛnt dɛn
0,30–0,50 mm	Balans bitwin fleksibiliti ɛn stiffness	Fɔlding bɔks, steshɔnari, print sheet, pak winda ɛn shalo fɔm
0,50–0,80 mm	Greater rigidity ɛn dimɛnshɔnal sɔpɔt	Big bɔks, fɔm kɔva, tre, displei panɛl ɛn thermoformed kɔmpɔnɛnt dɛn
0,80–1,20 mm	Hכy stiffnεs wit big fכm εn kris rikwaymεnt	Rigid kɔva dɛn, big panɛl dɛn, industrial kɔmpɔnɛnt dɛn ɛn pat dɛn we ebi pasmak

If yu projɛkt dɔn ɔlrɛdi yuz ɔda PET sheet, sɛn di tik we de naw, di dimɛnshɔn ɛn wan fizik sampul so dat HSQY go ebul fɔ evalyu wan kɔmparabl matirial.

Fayn Mat vs. Kɔs Mat PET Surface

Surface	Apirans	Tipik Sɛlɛkshɔn Dairekshɔn
Fayn Matte we dɛn kɔl	Fayn tɛkstɔr wit wan saf lɔw-glos apinans	Printin, prɛmiɔm pak, steshɔnari ɛn dɛkɔretiv aplikeshɔn dɛn
Kɔs Kɔs Mat	Mɔ visible tɛkstɔr ɛn strɔng difyushɔn fɔ dairekt riflɛkshɔn	Aplikeshɔn dɛn we nid fɔ gɛt mɔ pronɔns tɛkstɔr apinans

Tɛm dɛn lɛk fayn mat ɛn kɔs mat kin difrɛn bitwin di saplay dɛn, so di wan dɛn we de bay wit strikt apinans rikwaymɛnt fɔ gri fɔ wan fizik sampul ɔ gi target glos, haz ɛn tɛkstɔr rɛfrɛns.

Singl-sayd vs. Dabl-sayd mat PET

Mat PET kin spɛsifa wit difrɛn sɔfayz kɔnfigyushɔn akɔdin to printin, apinans ɛn prɔsesin rikwaymɛnt.

Konfigyushɔn	Diskripshɔn	Tipik Kɔnsidɛreshɔn
Wan-Sayd Mat	Wan mat surface wit difrɛn finish na di rivays sayd	Yusful we na wan fes nɔmɔ we pɔsin kin si nid fɔ mek i luk lɛk mat
Dabl-Sayd Mat	Mat apinans pan ɔl tu di say dɛn	I fayn we ɔl tu di say dɛn stil de si ɔ nid fɔ mek dɛn tan lɛk di sem we
Kɔmbayn we dɛn mek fɔ yusɛf	Surface konfigyushɔn we dɛn divɛlɔp akɔdin to di prɔjek nid	Konfam prodakshɔn fisibiliti, MOQ ɛn rikwayd sɔfayz valyu dɛn

Matte PET shit fɔ Print

Mat PET kin pik bɔku tɛm fɔ print bikɔs in sɔbdued sɔfa kin gi wan difrɛn grafik apinans kɔmpia wit glossy transparent PET .

Dɛn kin ebul fɔ evalyu di rayt gred dɛn fɔ skrin printin, UV printin ɛn ɔfset printin. Bɔt, di kɔmpitishɔn fɔ print dipen pan di tritmɛnt we dɛn de yuz fɔ mek di say we dɛn de, di ink kemistri, di kɔndishɔn we dɛn de mɛn ɛn di las we aw dɛn de kɔnvɔyt.

Matte PET Nid Korona Tritment?

Korona tritmɛnt nɔ nid fɔ de ɔtomɛtik fɔ ɛvri printin prɔses. di korekt tritmεnt dipכnt pan di PET sεf, ink sistεm, printin tεknכlכji εn di adheshon we dεn nid.

Di wan dɛn we de bay fɔ gi di ink we dɛn want, di we aw dɛn fɔ print ɛn di tin we dɛn nid fɔ adhesion we dɛn de aks fɔ di matirial so dat dɛn go ebul fɔ evalyu wan gred we dɛn dɔn trit ɔ we go gri wit di printin.

Di Tɛst dɛn fɔ Print we Dɛn Rikɔmɛnd Bifo Mas Prodakshɔn

• Ink adheshon
   • Kɔlɔ density ɛn apia
   • Kɔring tɛmpracha
   • Skrat ɛn rɔb rɛsistɛns fɔ print ink
   • Fɔl afta print
   • Day-kɔt afta print
   • Lamineshɔn ɔ adhesive kɔmpatibiliti
   • Surface apin afta dɛn dɔn prosɛs

Matte PET shit fɔ Fɔl ɛn Day Kɔt

Di rayt mat PET tiknes kin day kɔt, skor ɛn fold fɔ pak, steshɔnari ɛn fabricated plastic prodak.

Day-kɔt pefɔmɛns dipen pan bled kɔndishɔn, kɔt prɛshɔn, shit tɛmpracha, matirial dairekshɔn ɛn tiknes. Sampul tɛst fɔ chɛk edj kwaliti, krak krak, bur ɛn dimɛnshɔnal akkuracy.

Folding pefomans dipen pan skor wit, kris dip, folding rayus, tiknes en matirial dairekshon. Tik PET jεnarali nid mכr kεriכl kכntrכl tul dεm.

Mat PET shit fɔ Vaykum Fɔm ɛn Tɛmofɔmin

Suitabl tik-gej mat PET shit gred kin bi vaykum fɔm ɔ thermoformed insay trey, insɛt, protɛktiv kɔva ɛn tri-dimɛnshɔnal pak kɔmpɔnɛnt dɛn.

Impɔtant fɔm paramita dɛn inklud shit tiknɛs, ɔt tɛmpracha, ɔt yunifom, mold tɛmpracha, drɔ rɛtɛshɔn, kol tɛm ɛn dimɔld kɔndishɔn.

Bikɔs strɛch kin chenj di ɔrijinal mat tɛkstɔr ɛn haz, bayer dɛn wit strikt apinans rikwaymɛnt fɔ thermoform samples yuz di aktual prodakshɔn mold bifo dɛn apruv mas prodakshɔn.

Mat PET vs PET Sheet we gɛt glos

Ficha	Mat PET shit	PET Sheet we gɛt glos
Di we aw di wɔl de luk	Low-gloss, frosted ɔ tɛkstɔr	Smɔl ɛn polish
Tan lɛk	Ridyus riflekshɔn dɛn we pɔsin kin si	Strɔng riflɛkɛt aylayt dɛn
Di Visibiliti fɔ Prodak	Difyuz ɔ sɛmi-transparent apinans dipen pan haz	Bɛtɛ dairekt visibiliti tru klia gred
Finga prɛnt dɛn	Jɛnɛral wan nɔ kin notis so	Mɔ we yu kin si pan say dɛn we dɛn dɔn polish bad bad wan
Tipik Pozishɔn	Premium low-gloss pak ɛn grafik aplikeshɔn dɛn	High-clarity pak ɛn displei aplikeshɔn dɛn

Baya dɛn we nid fɔ gɛt ay dairekt transparency kin rivyu wi bak    PET Sheet we gɛt glos    prodakt rεnj.

Mat PET vs. Anti-Skrat PET shit

Mat surface appearance ɛn skratch resistance na difrɛn prodak prɔpati dɛn.

Mat tɛkstɔr kin mek smɔl mak dɛn nɔ de si bɛtɛ, bɔt dɛn nɔ fɔ ɔtomɛtik diskrayb am as sɔntin we gɛt had kɔt ɔ we gɛt ay skrach-rɛsistɛns pas dɛn dɔn disayn di patikyula matirial ɛn tɛst fɔ da wok de.

Aplikeshɔn dɛn we nid spɛshal sɔfays durabiliti kin rivyu bak    Anti-Skrat PET shit.

Yu kin Yuz Mat PET shit fɔ Pak Fɔd?

PET na tin we dɛn kin yuz bɔku bɔku wan fɔ pak, bɔt dɛn fɔ kɔnfyus se i fayn fɔ it-kɔntakt fɔ di spɛshal mat PET gred, rɛsin, sɔfayz tritmɛnt, aditiv pakej, kɔlɔ ɛn di kɔndishɔn dɛn we dɛn bin want fɔ yuz.

If dɛn nid fɔ kɔntakt di it dairekt wan, di wan dɛn we de bay fɔ gi di dɛstineshɔn makit, di kayn it, di kɔntakt tɛmpracha, di tɛm we dɛn fɔ kɔntakt ɛn di aplikebul rigyuletɔri rikwaymɛnt dɛn bifo dɛn ɔda.

Di PET tɛknikal data shit dɛn we de, rɛsin ripɔt ɔ ɔda dɔkyumentri fɔ mach wit di ɛksaktɔl prodak we dɛn de bay pas fɔ aplay wan sɛtifikeshɔn stetmɛnt to ɛvri mat PET matirial.

Kastom Mat PET shit ɛn Rol Opshɔn dɛn

HSQY de sɔpɔt kɔstɔm PET matirial saplai fɔ printin kɔmni dɛn, pak manifakta, tɛmfɔma, steshɔnari manifakta, plastic distribyushɔn ɛn industrial kɔnvɔta.

Di kɔstɔm opshɔn dɛn kin inklud:

• Kastomayz PET tiknes
   • Kastɔm ​​shit dimɛnshɔn
   • Kastɔm ​​rol wit ɛn slit
   • Flat shit ɔ rol saplai
   • Fayn mat ɔ kɔs mat apinans
   • Singl-sayd ɔ dabl-sayd mat sɔfays
   • Transparent ɔ translucent apinans
   • Kastɔm ​​kɔlɔ dɛn we de ɔnda fɔmyulashɔn rikwaymɛnt
   • Printin-kɔmpatibl sɔfays tritmɛnt
   • Protɛktiv film fɔ prɔses
   • Kastɔm ​​kɔt tolɛreshɔn
   • Kastɔm ​​rol wet
   • Ɛkspɔt palet ɛn pak we dɛn nid fɔ pak

Matte PET Kwaliti Kɔntrol

Fɔ B2B kɔnvɔyt aplikeshɔn, kɔnsistɛns sɔfays apinɛns ɛn dimɛnshɔn kin impɔtant lɛk di PET rɛsin insɛf.

Di tin dɛn we dɛn kin rɛkɔmɛnd fɔ inspekshɔn ɛn sampul-aprɔval na:

• Tiknɛs ɛn tiknɛs tolɛreshɔn
   • Wid ɛn shit dimɛnshɔn
   • Mat lɛvɛl ɛn sɔfayz tɛkstɔr
   • Haz ɛn transparency
   • Singl-sayd ɔ dabl-sayd mat kɔnfigyushɔn
   • Kɔlɔ ɛn batch kɔnsistɛns
   • Shit flatnɛs
   • Stiffnɛs ɛn fleksibiliti
   • Print adheshon
   • Day-kɔtin edj kwaliti
   • Fɔlding ɛn kris-waytin bihayvya
   • Tɛrmofɔmin pefɔmɛns
   • Adhesive ɛn lamineshɔn kɔmpatibiliti
   • Protektiv-film kompitibiliti
   • Rikwayd rigyuletɔri dɔkyumentri

Aw fɔ Pik di Rayt Mat PET Matirial

1. Difayn If Yu Nid Fim ɔ Shit

Spɛsifik if di aplikeshɔn nid tin fleksibul film, sɛmi-rigid shit ɔ tik thermoforming matirial.

2. Spɛsifik Tiknɛs ɛn Tolɛreshɔn

Gi di nominal tik we dɛn nid togɛda wit akseptabl tolɛreshɔn. Yuz maykron fɔ tin film ɛn milimita usay i fayn fɔ tik sheet.

3. Difayn di Mat Surface

Kɔnfɛm if yu nid fayn mat, kɔs mat, lɔw glos, frɔst apinans, singl-sayd mat ɔ dabl-sayd mat.

4. Spɛsifik Transparency ɛn Haze

If di prɔdak we dɔn dɔn fɔ de pat pan di transparent, gi di we aw i fɔ luk ɔ wan rɛfrɛns sampul we dɛn dɔn gri fɔ.

5. Kɔnfɛm di Print Prɔses

Spɛsifik skrin printin, UV printin, ɔfset printin, ɔt transfa ɔ ɔda prɔses togɛda wit di ink sistɛm usay i pɔsibul.

6. Kɔnfɛm di tin dɛn we yu nid fɔ kɔnvɔyt

Tɛl HSQY if di matirial go day kɔt, fold, laminated, vaykum fɔm, thermoformed, slit ɔ prosɛs yuz ɔda we.

7. Spɛsifik di Surface Protection

If skrat-sɛnsitiv dawtstrim prɔsesin involv, tɔk bɔt protɛktiv fim, intalay protɛkshɔn ɔ spɛshal pak rikwaymɛnt dɛn.

8. Kɔnfɔm di Rigyuletɔri Rikwaymɛnt dɛn

Gi ɛni dɔkyumentri we dɛn nid fɔ gɛt fɔ kɔntakt it, fɔ ristrikt-sɔbstans, ilɛktrik ɔ fɔ di makit bifo dɛn gri fɔ di las matirial.

9. Tɛst Fizik Sampul dɛn

We sɔfayz apinɛns, printin ɔ fɔm pefɔmɛns impɔtant, apruv wan fizik sampul yuz di aktual manufakchurin prɔses bifo bɔlk prodakshɔn.

Pakɛj ɛn Intanɛshɔnal Shipin

Mat PET shit ɛn rol matirial dɛn kin pak akɔdin to tik, sɔfayz sɛnsitiviti, ɔda volyum ɛn usay dɛn de go.

Sampul dɛn	A4 sheet, kɔt sɛmpul ɔ limited-sayz rol sɛmpul akɔdin to wetin de
Sheet Packing we dɛn kin pak	Protektiv bag, rap ɛn palet pak akɔdin to di sheet dimɛnshɔn
Rol Pak we dɛn kin pak	Rol wrapping ɛn palet protɛkshɔn akɔdin to di wit, tik ɛn rol wet
Protɛkshɔn fɔ di say we di wɔl de	Protektiv film, PE wrapping, kraft pepa ɔ intalay protɛkshɔn kin tɔk bɔt
Ɛkspɔt Pak	Plywood pallet ɔ kɔstɔmayt ɛkspɔt pak akɔdin to shipmɛnt rikwaymɛnt

Wetin Mek Yu Pik HSQY as Yu Matte PET shit Manufacturer?

Bɔku Mat PET Prodak Tayp dɛn: HSQY de saplae ɔl tu tin mat PET film prodak ɛn tik mat PET shit ɛn rol matirial fɔ difrɛn manufakchurin prɔses.

Waid Tiknes Sεlεkshכn: di prכdak dεm we de naw de kכba tin-film spεsifikεshכn dεm we de stat frכm lεk 50 μm tכgeda wit mεnstrim tik-gεj PET shit prodakt dεm te to lεk 1.2 mm.

Shit ɛn Rol Sapɔt: Dɛn kin tɔk bɔt standad shit, kɔstɔm-kat shit, rol ɛn slit rol akɔdin to di prodakshɔn rikwaymɛnt.

Kastom Surface Options: Fayn mat, kɔs mat, lɔw-glos, singl-sayd mat ɛn dabl-sayd mat kɔnfigyushɔn dɛn kin evalyu akɔdin to di prodakt apinans we dɛn nid.

Bɔku Kɔnvɔyt Aplikeshɔn dɛn: Di fayn prɔdak dɛn kin sɔpɔt printin, fɔl bɔks, day kɔt, steshɔnari, vaykum fɔm ɛn tɛmɔfɔm.

Broda PET Prodakt Pɔtfɔlio: Kastamɔ dɛn kin sɔs bak    PET shit,    PET Sheet we gɛt glos    ɛn    Anti-Skratch PET shit    akɔdin to difrɛn sɔfa ɛn aplikeshɔn rikwaymɛnt dɛn.

Infɔmeshɔn Nid fɔ wan Mat PET Kɔt

Tik we i tik	Rikwayd maykron ɔ milimita tik ɛn tolɛreshɔn
Fɔm fɔ di Sapɔt	Shit, kɔt sheet, rol ɔ slit rol
Dimenshɔn dɛn	Shit lɔng × wit ɔ rol wit × rol lɔng / wet
Mat Surface we de na di wɔl	Fayn mat, kɔs mat, singl-sayd mat, dabl-sayd mat ɔ target sampul
Aw a luk	Transparent, translucent, kala, haz ɔ glos rikwaymɛnt
Di we aw dɛn de du di wok	Print, fold, day kɔt, thermoforming, vaykum fɔm, lamination ɔ ɔda prɔses
Di We aw Dɛn De Print	Skrin, UV, ɔfset, ɔt transfa ɔ ɔda printin prɔses
Tritmɛnt fɔ di Surface	Korona, printin tritmɛnt, protɛktiv film ɔ ɔda tin we dɛn nid
Aplay fɔm	Fɔl bɔks, printin, steshɔnari, tɛmɔfɔmin, displei, industrial kɔmpɔnɛnt ɔ ɔda yus
Ɔmɔs	Trayal kwantiti, rɛgyula ɔda kwantiti ɛn ɛstimat ɛni ia dimand
Usay yu de go	Di kɔntri we dɛn de go ɛn di pɔt

Matte PET shit FAQ we dɛn kin aks fɔ

Wetin na mat PET sheet?

Mat PET shit na polyethylene terephthalate shit we gɛt lɔw-glos, frɔst ɔ tɛkstɔr sɔfays. i de gi wan sכft vishכnal apinεns εn i de ridyus strכng sכfayz rεflεkshכn dεm we yu kכmpεr wit glos PET .

Dɛn kɔl am mat PET ɔ mat PET ?

Dɛn yuz ɔl tu di spɛlin dɛn. 'Matte PET ' na kɔmɔn tin na Amɛrikan Inglish, we 'matt PET ' na tin we dɛn kin yuz bak bɔku bɔku wan na intanashɔnal. Dɛn tu jɔs de tɔk bɔt PET matirial wit lɔw-glos ɔ tɛkstɔr sɔfays.

Wetin na mat PET sheet we dɛn kin yuz fɔ?

Kɔmɔn aplikeshɔn dɛn na fɔ print, fɔ fold bɔks, binding kɔva, steshɔnari, pak winda, displei panɛl, protɛktiv kɔva, vaykum fɔm ɛn thermoforming.

Us tiknes fɔ mat PET HSQY de gi?

di HSQY prodakt famili dεm we de naw inklud sεlekt tin mat PET mεtirial dεm frכm lεk 50–400 μm εn tik-gεj prodakt dεm we kכmכn fכ de frכm lεk 0.18–1.2 mm. Eksakt avaylabl dipen pan di prodak ɛn spesifikeshɔn.

Wetin na di difrɛns bitwin mat PET shit ɛn mat BOPET fim?

Mat PET sheet kin jɔs tik ɛn dɛn kin yuz am fɔ print, fɔ fold, fɔ mek tɛmmofɔm ɛn fɔ mek pat dɛn. Mat BOPET film kin tכn bכku εn dεn kin yus am fכ fleksibul pak, laminεshכn, lεbul, hεt tכnfכs εn כda rol-to-rol kכnvכt aplikεshכn dεm.

Na mat PET transparent?

Mat PET kin bi transparent ɔ translucent, bɔt di tɛkstɔr sɔfays de difyuz layt ɛn ridyus dairekt klia. Faynal apinans dipכnt pan haz, tik, tεkschar εn layt kכndishכn.

Mat PET na di sem wit frosted PET ?

Bɔku tɛm dɛn kin yuz di wɔd dɛn fɔ di sem kayn lɔw-glos vijual ifɛkt dɛn, bɔt di aktual tɛkstɔr, haz ɛn glos kin difrɛn bad bad wan. Baya dɛn wit strikt apinans target fɔ apruv wan fizik sampul.

Mat PET de ridyus glare?

Mat tɛkstɔr kin ridyus strɔng riflekshɔn dɛn we pɔsin kin si we yu kɔmpia am wit wan say we gɛt glos. Bɔt, standad mat PET nɔ fɔ ɔtomɛtik trit as sɛtifiket ɔptik anti-glɛya fim wit difayn ɔptik pefɔmɛns.

Yu tink se mat PET nɔ de skrach?

wan mat sεf kin mek sכm sכm hεndlin mak dεm nכ de si, bכt di aktual skrach εn abrashכn rεsistεns dipכnt pan di PET gred εn sכfayz tritmεnt. Aplikeshɔn dɛn we nid ay skrat rɛsistɛns fɔ spɛsifa wan had-kɔt ɔ tɛst anti-skrach prodak.

Yu kin print mat PET sheet?

Yɛs. Suitabl mat PET gred kin sɔpɔt skrin, UV ɛn ɔfset printin. Ink adhesion, surface treatment ɛn curing kondishɔn fɔ tɛst wit di aktual printin sistem bifo mas prodakshɔn.

Yu tink se matte PET nid korona tritmɛnt fɔ print?

Nɔto insay ɛni aplikeshɔn. Di tritmɛnt we dɛn nid de dipen pan di PET sɔfa, ink ɛn printin prɔses. Gi yu printin we so HSQY go ebul fɔ evalyu wan fayn sɔfa opshɔn.

Yu kin fold mat PET sheet?

Dɛn kin skor di tik we fit ɛn fɔ fold fɔ pak ɛn fɔ steshɔn. Tiknes, matirial dairekshɔn, skor wit, kris dip ɛn fɔlding rayus de inflɔws spring-bak, waytin ɛn krak.

Yu tink se mat PET shit kin thermoformed?

di aprכpriet mat PET gred dεm kin fכm vεkyum כ tεmכfכm. Bikɔs fɔ ɔt ɛn strɛch kin chenj di sɔfayz tɛkstɔr, haz ɛn tiknɛs distribyushɔn, dɛn kin rɛkɛmand fɔ tray fɔ prodyuz.

Yu kin yuz mat PET fɔ fold bɔks?

Yɛs. Mat PET kin yuz fɔ translucent folding bɔks, sliv ɛn prɛmiɔm rital pak we dɛn pik wan aprɔpriet tik ɛn kris strɔkchɔ.

Yu kin yuz mat PET fɔ pak it?

Dɛn kin yuz PET gred dɛn we dɛn dɔn pik fɔ pak it, bɔt dɛn fɔ kɔnfyus if it-kɔntakt fit fɔ di ɛksaktɔl rɛsin, aditiv, sɔfayz tritmɛnt ɛn di kɔndishɔn dɛn we dɛn bin want fɔ yuz.

Yu tink se mat PET kin biyodegradabl?

Standard PET nɔ fɔ nɔmal fɔ diskrayb am as bayɔdigradabl. Di opshɔn dɛn we de dɔn di layf dipen pan di matirial strɔkchɔ, aditiv, kɔntaminɛshɔn ɛn di kɔlɛkshɔn ɛn risaykul infrastukchɔ we de na di dɛstineshɔn makit.

Yu kin risaykul matte PET ?

PET na teknikal risaykul, bɔt if dɛn aksept wan patikyula mat PET prodak na risaykul strim dipen pan in sɔfayz tritmɛnt, kɔtin, kɔlɔ, adeziv, kɔntaminɛshɔn ɛn lokal risaykul infrastukchɔ.

HSQY kin saplae mat PET in rol?

Yɛs. Dɛn kin gi di prɔdak dɛn we dɛn dɔn pik as ful rol ɔ slit rol. Di spɛsifikɛshɔn dɛn fɔ di prɔdak we de naw inklud di rol wit dɛn we go rich lɛk 1280 mm, we de ɔnda di tik ɛn di tin dɛn we dɛn nid fɔ mek.

HSQY kin kot mat PET sheet to saiz?

Dɛn kin tɔk bɔt di dimɛnshɔn dɛn we dɛn kin kɔt akɔdin to di tik, saiz tolɛreshɔn, ɔda kwantiti ɛn di we aw dɛn kin mek am.

A kin geht wan fizik mat PET sampul?

Yɛs. Yu kin tɔk bɔt A4 sheet ɔ limited-sayz sɛmpul dɛn we de fɔ chɛk di tik, mat apinans, transparency, printin, folding ɛn thermoforming pefɔmɛns.

Wetin a fɔ gi we a de aks fɔ mat PET kot?

Gi tik, shit ɔ rol dimɛnshɔn, mat sɔfays rikwaymɛnt, transparency, printin ɔ fɔm prɔses, kwantiti we nid, aplikeshɔn ɛn dɛstineshɔn makɛt. Wan fyzikal rεfrεns sεmpl de yusful we di surface apinεns na krichɔl.

Rikwest wan Mat PET shit Kot

Yu de luk fɔ wan rilibul mat PET shit manifakta , mat polyɛsta fim spɔlayt ɔ kɔstɔm lɔw-glos PET matirial fɔ print, fold bɔks, steshɔnari ɔ tɛmɔfɔm?

Send HSQY yu tiknes we yu nid, dimɛnshɔn, sɔfayz finish, prɔsesin we ɛn ɛstimat pɔchɛshɔn volyum. Wi tim kin ɛp fɔ no if yu nid tin mat PET fim, tik-gej PET shit, shit matirial ɔ rol matirial ɛn gi yu fayn sampul ɛn faktri prayz.