Hɛt-Resistant CPET Shit fɔ Ovenable Fɔd Pakɛj
HSQY PLASTIC de mek ɛn saplae CPET shit ɛn rolstɔk we nɔ de ɔt fɔ mek dɛn ebul fɔ mek it trey dɛn we dɛn kin ɔvin, maykrowev it trey, frɔzɛn rɛdi-mil pak, aylayn it kɔntena, bekeri tre ɛn ɔda ay-tɛmpracha it-pak aplikeshɔn dɛn.
CPET tinap fɔ kristalin polyethylene terephthalate . Nɔ lɛk kɔvɛnshɔnal transparent APET we dɛn kin yuz mɔ fɔ chill pak, CPET na injinɛri fɔ divɛlɔp wan kɔntrol kristalin strɔkchɔ we de gi big dimɛnshɔnal stebiliti we di finish trey de ɛkspos to ɛlevɛt tɛmpracha.
HSQY in kɔrɛnt ɔt-rɛsistant CPET prodak rɛnj inklud lɛk 0.12–3.0 mm tiknes , rol wit frɔm lɛk 80–1300 mm , blak ɛn wayt standad kɔlɔ, ɛn kɔstɔmayz shit, rol, kɔlɔ ɛn sɔfays opshɔn dɛn. Faynal tempɔret pefɔmɛns dipen pan di ɛksaktɔ CPET fɔmyulashɔn, kristaliniti, shit tiknes, trey jɔyometri, tɛmfɔmin prɔses, it lod ɛn ɔt saykl.
Wetin Na CPET Shit we Nɔ De Ɔt?
Heat-resistant CPET sheet na PET-based thermoforming matirial we dɛn divɛlɔp fɔ aplikeshɔn dɛn we nid big thermal stebiliti pas kɔvɛnshɔnal amorphous PET.
We dɛn de mek CPET ɛn we dɛn de mek di tɛm, dɛn kin tek tɛm kɔntrol di kristalizashɔn. Di kristalin rijyɔn dɛn de ɛp di trey we dɔn dɔn fɔ mek i kɔntinyu fɔ gɛt in jɔyometri we i de pan tɛmpracha we i de kuk ɔ we i de ɔt bak we nɔmal fɔ mek di standad transparent APET pak fɔ sof ɔ distɔrj.
Dɛn kin kɔmɔn fɔ fɛn di matirial bak as ay-tɛmpracha PET shit, ɔvinable PET shit, CPET plastic shit, kristalin PET shit, C-PET shit ɔ CPET tɛmfɔmin rolstɔk.
High-Temperature PET Nɔto Wan Wan Matirial
Di wan dɛn we de bay fɔ difrɛns bitwin difrɛn prɔdak dɛn we dɛn de makɛt as 'high-temperature PET.'
| Matirial Tayp |
Apiyans |
Tipik Ɔt Rikwaymɛnt |
Tipik Aplikeshɔn |
| CPET we dɛn kɔl CPET |
Nɔmal wan opaque ɔ translucent; kɔmɔn fɔ blak ɔ wayt |
Dɛn mek am fɔ maykrowev ɛn kɔvɛnshɔnal-ɔvin it pak afta dɛn dɔn validet am |
Rɛdi it, baking trey, aylayn it ɛn frɔzɛn ovenable it trey |
| Standart APET we dɛn kɔl |
I rili transparent |
Primarily ambient, chilled ɛn lɔwa-tɛmpracha pak |
Frut trey, bekeri klamshɛl, kol-fud pak ɛn blista pak |
| PETG we dɛn kɔl PETG |
Klia ɛn glos |
Gud thermoforming pefomans bɔt nɔto ɔtomɛtik kɔvɛnshɔnal-ɔvin fit |
Displei, klia fom pat ɛn spɛshal pak |
| Modified Klia Hɛt-Resistant PET |
Klia |
Aplikeshɔn-spɛsifi k ɛlevɛt-tɛmpracha dimɛnshɔnal stebiliti |
Ilɛktronik trey ɛn industrial tɛmfɔmin aplikeshɔn dɛn |
HSQY in praymar prodak dɛm na dis kategori na CPET sheet fɔ ay-tɛmpracha it pak . Di kɔstɔma dɛn we nid transparent ay-tɛmpracha PET fɔ ilɛktroniks ɔ ɔda industrial aplikeshɔn fɔ gi di ɔt-diflɛkshɔn tɛmpracha, transparency, ESD rikwaymɛnt ɛn opareshɔn kɔndishɔn dɛn we dɛn nid sɛpret.
Hɛt-Resistant CPET Shit Spɛsifikeshɔn dɛn
| Sɔntin |
Hɛt-Resistant CPET Tɛmofɔmin Sheet |
| Ɔda Nem dɛn |
CPET Shit, Krɔstal PET Shit, Ovenable PET Shit, Ay-Tɛmpratura PET Shit, C-PET Shit |
| Tin dɛn |
Kristalin Polietilen Tɛriftalayt / CPET |
| Tik we i tik |
Na lɛk 0.12–3.0 mm |
| Rol Width we yu de yuz |
Na lɛk 80–1300 mm |
| Standart Shit Sayz dɛn |
700 × 1000 mm, 915 × 1830 mm, 1000 × 2000 mm, 1220 × 2440 mm ɛn kɔstɔm saiz dɛn |
| Fɔm fɔ di Sapɔt |
Masta rol, slit rol, flat shit ɛn kɔstɔm-kat shit |
| Standart Kɔlɔ dɛn |
Blak ɛn wayt |
| Kastom Kɔlɔ dɛn |
Gold, silva, krim, grey ɛn ɔda prɔjek-spɛsifi k kɔlɔ dɛn we de ɔnda fɔmyulashɔn ɛn MOQ |
| Sho |
Glossy, mat, fayn tɛkstɔr, ɛmbos, kɔt ɔ kɔstɔm finish |
| Featured Hɛt Pɔfɔmɛnshɔn |
Up to aprɔksimatli 350°F / 177°C fɔ di kɔrɛnt ficha HSQY gred ɔnda validet ɔt kɔndishɔn |
| Di we aw dɛn kin ɔt di wata |
Maykrowev ɛn kɔvɛnshɔnal-ɔvin aplikeshɔn dɛn afta dɔn-trey validɛshɔn |
| Di we aw dɛn de du di wok |
Tεmכfכm, vεkyum fכm, prεshכn fכm, pכlכg-asist fכm, kכt εn trim |
| Tipik Aplikeshɔn dɛn |
Trey dɛn we dɛn kin ɔvin, rɛdi it, aylayn it tre, bekeri tre, frɔzɛn it ɛn ketɛning pak |
| MOQ we gɛt fɔ du wit am |
Na lɛk 1,000 kg fɔ di standad prodak we de naw; final MOQ dipen pan kala ɛn spɛsifikɛshɔn |
CPET Tɛmpratura Pɔfɔmɛnshɔn
No wan yunivasal maksimal tɛmpracha nɔ de we de aplay to ɛvri CPET sheet ɛn ɛvri trey we dɔn dɔn.
Di ɔt rɛsistɛns de inflɔws bay rɛsin fɔmyulashɔn, kristaliniti, shit gej, finish wɔl tik, trey jɔyometri, it mɔstɔ ɛn ɔyl kɔntinyu, ɔt tɛm, ɔvin tayp ɛn if di trey na mɛkanikal sɔpɔt we dɛn de kuk.
| Kondishɔn |
Tipik Aplikeshɔn |
Rikɔmɛnd Validɛshɔn |
| Frɔzɛn Stɔrej |
Frɔzɛn rɛdi it ɛn kol-chen distribyushɔn |
Lɔw-tɛmpracha impak, drɔp, stak, transpɔt ɛn sil tɛst |
| Fɔ kip tin dɛn na frij |
Chilled pripia it ɛn ketɛning |
Sil integriti, kɔndenseshɔn, transpɔt ɛn shelf-layf tɛst |
| Maykrowev Rihitin |
Wan wan it dɛn we dɛn dɔn rɛdi ɛn it we dɛn dɔn pripia |
Maykrowev wat, tɛm fɔ ɔt, it lod, ventin ɛn hot-spɔt tɛst |
| Kɔnvɛnshɔnal Ɔvin we go rich lɛk 350°F / 177°C |
Naw fichu HSQY CPET gred |
Oven temperechur, kuk durayshɔn, trey lod ɛn difɔmeshɔn tɛst |
| Di Rikwaymɛnt fɔ Hɔy-Tɛmpratura |
Speshal friza-to-ɔvin ɔ dual-ovenable aplikeshɔn dɛn |
Gret-spɛsifi k tɛknikal ɛvalueshɔn ɛn kɔmplit finish-pakɛj validɛshɔn |
CPET vs. APET, PETG ɛn PP
| Matirial |
Apiyans |
Ɔt Pɔfɔmɛnshɔn |
Tipik Aplikeshɔn dɛn |
| CPET we dɛn kɔl CPET |
Nɔmal wan opaque ɔ translucent |
Divɛlɔp fɔ ay-tɛmpracha maykrowev ɛn kɔvɛnshɔnal-ɔvin aplikeshɔn dɛn |
Di it dɛn we dɛn kin it na ɔvin, it dɛn we dɛn dɔn frɔz, it dɛn we dɛn kin it na aylayn ɛn bekɛri tre dɛn |
| APET we dɛn kɔl APET |
Ay klia wan |
Bɛtɛ fit fɔ ambient, chilled ɛn lɔwa-tɛmpracha aplikeshɔn dɛn |
Frut pak, bekeri klamshɛl, tre ɛn blista |
| PETG we dɛn kɔl PETG |
Klia ɛn glos |
Gud fɔm bihayvya bɔt nɔto ɔtomɛtik kɔvɛnshɔnal-ɔvin kɔmpitabl |
Displei, klia fɔm kɔva ɛn spɛshal pak |
| PP |
Natural translucent ɔ we gɛt kɔlɔ |
Kɔmɔn maykrowev-fud matirial; fɔ yuz kɔvɛnshɔnal-ɔvin nid fɔ gɛt spɛshal sistɛm |
Maykrowev trey, tek-away kɔntena ɛn it dɛn we dɛn dɔn pripia |
Wetin Mek Kristaliniti Impɔtant na CPET
di difrεns bitwin כdinari APET εn hεy-tεmprachכ CPET strכngli rilayt to mכlikul strכkchכ εn kristכlayzeshn.
Standart transparent APET na big wan amorphous. dis de kכntribyut to in klia bכt i de limited dimenshכnal stεbiliti na εlevεt tεmprachכ.
CPET fכmyuleshכn dεm de yuz kristalizεshכn-prכmot sistεm dεm εn kכntroled prכsεsin kכndishכn dεm. we dεn de tεmכfכm, dεn de hεt di mεtirial εn de ol am כnda di aprכpriet kכndishכn dεm so inof kristaliniti de divεlכp insay di tεy we dεn dכn.
Insufishɛnt ɔ nɔ ivin kristalizashɔn kin rilizɔt in kɔnsistɛns trey stiffness, dimɛnshɔnal stebiliti ɛn ɔt pefɔmɛns. Dis na di rizin we mek CPET matirial, mold tɛmpracha, ɔt tɛm ɛn kol kɔndishɔn fɔ injinɛri togɛda.
CPET Sheet fɔ Ovenable Rɛdi-Mil Trey dɛn
Di wan dɛn we de mek rɛdi-mil kin yuz CPET bikɔs wan tre kin pɔtɛnɛshɛl fɔ muv tru frɔzɛn ɔ kol stɔrɔj ɛn afta dat insay validet rihit ɔ kuk prɔses.
Di tipik tin dɛn we dɛn kin yuz fɔ rɛdi it na pasta, rays it, mit it, vɛjitebul, kash, frɔzɛn dina ɛn it we dɛn dɔn pripia fɔ it.
Di kɔstɔma dɛn we nid fɔ gɛt trey fɔ it we dɔn dɔn kin rivyu wi CPET Tray fɔ it Pak rɛnj.
CPET Sheet fɔ Baking Trey dɛn
CPET kin thermoformed insay baking trey fɔ sɔm sɛlɛkɛt bekeri, dɛzat ɛn ɔvin-rɛdi it aplikeshɔn dɛn.
Dɛn fɔ evalyu di we aw dɛn de bek akɔdin to di tɛmpracha na di ɔvin, di tɛm we dɛn de bek, di mɔstɔ we di prɔdak gɛt, di shuga ɛn fat we de insay, di trey jɔyometri ɛn if dɛn sɔpɔt di paket we dɛn de ɔt.
Finish prodakt dɛn de na wi CPET Baking Trays kategori.
CPET Sheet fɔ Aylayn Mil Trey dɛn
Aylayn ketɛning na ɔda CPET aplikeshɔn we dɛn dɔn establish bikɔs bɔku tɛm di it dɛn we dɛn kin pripia kin nid fɔ gɛt frij ɔ frɔzɛn lɔjistik we dɛn kin fala fɔ rihit bifo dɛn gi savis.
Di aylayn trey projɛkt dɛn fɔ tink bɔt di pat saiz, di trey dimɛnshɔn, di kɔmpawtmɛnt layout, stakabiliti, silin film, rihit prɔses ɛn kɔmpatibiliti wit ketɛning ikwipmɛnt.
Yu kin rivyu di kɔntena dɛn we dɔn dɔn insay di CPET Aylayn Trey kategori.
CPET Sheet fɔ Frɔzɛn Rɛdi It dɛn
Bɔku tɛm dɛn kin pik CPET fɔ frɔzɛn rɛdi it usay di sem paket fɔ telɛ fɔ kip tin dɛn we nɔ gɛt bɛtɛ tɛmpracha ɛn afta dat dɛn fɔ ɔt am bak ɔ kuk am na ɔvin.
Low-temperature suitability nɔ fɔ evaluate bay rɛsin nem nɔmɔ. Di trey we dɔn dɔn fɔ tɛst fɔ drɔp impak, krak, stak, vaybreshɔn ɛn sil intɛgriti ɔnda aktual frɔzɛn-stɔrɔj ɛn transpɔt kɔndishɔn.
CPET Sheet fɔ Maykrowev Mil Trey dɛn
Yu kin yuz fayn CPET trey sistem fɔ maykrowev rihit fɔ it dɛn we dɛn dɔn pripia.
Maykrowev tɛst fɔ inklud di aktual it bikɔs wata, ɔyl, fat ɛn shuga we de insay kin prodyuz rili difrɛn ɔt patɛn. Maykrowev watj, di tɛm we dɛn de ɔt, di wet we di trey ful-ɔp, di vent ɛn lid ɔ film instrɔkshɔn ɔl fɔ de insay di validɛshɔn prɔses.
CPET Tɛmofɔmin Rikwaymɛnt dɛn
CPET thermoforming nid mɔ prɔses kɔntrol pas kɔvɛnshɔnal kol-fud APET fɔm bikɔs trey jɔyometri ɛn kristalizashɔn de divɛlɔp togɛda di tɛm we dɛn de prodyuz.
Impɔtant thermoforming paramita dɛn inklud:
• Shit tik ɛn tolɛreshɔn
• Rol wit
• Shit drying kɔndishɔn
• Hɛt-zon tɛmpracha profayl
• Mold tɛmpracha
• Hɛt ɛn rɛsidɛns tɛm
• Fɔm prɛshɔn ɔ vaykum
• Plɔg-ɛsist dizayn
• Draw rɛtɛshɔn
• Trey wɔl-tiknɛs distribyushɔn
• Flɛnch jɔyometri
• Krɔstalayzeshɔn lɛvɛl
• Kɔl kɔndishɔn
• Kɔt ɛn trim prɔses
Aw Shit Tiknɛs Afɛkt CPET Trey Pɔfɔmɛnshɔn
Shit tiknes afɛkt finish trey rigiditi, wɔl tiknes, fɔm dip, matirial distribyushɔn ɛn ɔvala pakej wet.
| Selection Factor |
Wetin Mek I Impɔtant |
| Dip we di Trey de |
dip kaviti dεm de strεch di כrijinal sheet mכr εn kin mek tכn kכna dεm εn wכl dεm. |
| Weyt fɔ it |
Di pat dɛn we dɛn kin it we ebi ebi it kin nid fɔ mek di trey strɔng mɔ. |
| Ɔvin Ɛksplɔshɔn |
Finished wall tiknes inflɔws dimɛnshɔnal stebiliti di tɛm we dɛn de ɔt. |
| Flɛnch Strɔng |
Di siling flɛnch fɔ de flat ɛn rigid fɔ rili lidding-film siling. |
| Di Kɔst fɔ di Matirial |
Sheet we tik pasmak kin ad di kɔst fɔ di matirial we nɔ nid ɛn di wet we di pakej gɛt. |
So dɛn fɔ pik di kɔrɛkt statin gej yuz di aktual trey drɔin ɛn fɔm kɔndishɔn dɛn pas fɔ pik wan yunivasal CPET tiknes.
Blak vs. Wait CPET Sheet
Blak ɛn wayt na di CPET trey kɔlɔ dɛn we dɛn kin yuz mɔ.
| Ficha |
Blak CPET |
Wait CPET |
| Aw a luk |
Dak prɛmiɔm prɛzɛntɛnshɔn |
Klin ɛn nyutral prɛzɛntɛnshɔn |
| Fɔd Kɔntrast |
Strɔng difrɛns wit bɔku it dɛn we gɛt layt kɔlɔ |
Nyutral bakgrɔn fɔ bɔku bɔku it dɛn |
| Tipik Maket dɛn |
Ritayl rɛdi it ɛn prɛmiɔm pripia it dɛn |
Aylayn, institiushɔnal, bekɛri ɛn pripia-fud pak |
Yu tink se Transparent CPET De?
kכnvεshכnal hεli kristכlayz CPET na nכmal translucent כ opaque pas kristכl klia.
di hכy transparency de mכr kכmכn fכ APET εn PETG. So, wan rikwest fɔ 'klia ay-tɛmpracha PET' fɔ evalyu separet frɔm kɔvɛnshɔnal blak ɔ wayt CPET.
If ɔl tu di transparency ɛn ɛlevɛt-tɛmpracha dimɛnshɔnal stebiliti na mandatory, gi di rikwayd ɔpreshɔn tɛmpracha, ɔt durayshɔn ɛn optik rikwaymɛnt so wan aplikeshɔn-spɛsifi k PET strɔkchɔ kin ebul fɔ evaluate.
CPET Tray Sial ɛn Lidin Film
Wan kɔmplit ɔvinable ɔ rɛdi-mɛl pakej inklud mɔ pas di CPET trey sɛf. Trey flɛnch dizayn, lidding-film strɔkchɔ, siling tɛmpracha, prɛshɔn ɛn dwɛl tɛm fɔ wok togɛda.
Dipen pan di aplikeshɔn, di wan dɛn we de bay kin nid fɔ gɛt weld-sil ɔ izi-pil lid, anti-fɔg pefɔmɛns, print fim, maykrowev ventin ɔ ɛlevɛt-tɛmpracha rɛsistɛns.
HSQY de saplae bak Siling Film fɔ CPET Trey so dat trey matirial, finish trey ɛn lidding-film rikwaymɛnt dɛn kin evalyu togɛda.
Oven ɛn Maykrowev Validɛshɔn
Material-level heat resistance nɔ de ɔtomɛtik garanti se ɛvri finish thermoformed trey fit fɔ ɛvri ɔvin ɔ maykrowev saykl.
Finished-package validation fɔ inklud:
• Di dimɛnshɔn fɔ di trey we dɔn dɔn ɛn di tik we di wɔl
tik • Di kayn it ɛn di wet we di it
gɛt • Ɔyl, fat, shuga ɛn wata we de insay
• Lidin film ɔ kɔva
• Di kayn
ɔvin we dɛn dɔn sɛt •
Di tɛm fɔ kuk
• Maykrowev wat ɛn di tɛm we i de ɔt
• Di kɔndishɔn fɔ sɔpɔt di tre • Di
tin dɛn we yu nid fɔ pul •
Difɔmeshɔn afta yu dɔn ɔt
• Sil intɛgriti
• I de handle wantɛm wantɛm afta yu dɔn ɔt
Di Tin dɛn we Yu fɔ Du fɔ Kɔntakt fɔ it
Fɔd-kɔntakt kɔmplians na spɛshal fɔ di CPET rɛsin, aditiv, kala masta batch, risaykul kɔntinyu, kɔtin ɛn di kɔndishɔn dɛn we dɛn want fɔ yuz.
Di wan dɛn we de bay fɔ gi di say we dɛn de go, di kayn it we dɛn de it, di maksimal kɔntakt tɛmpracha, di we aw dɛn de ɔt ɛn di tɛm we dɛn fɔ kɔntakt so dat dɛn go ebul fɔ mek di dɔkyumɛnt dɛn we de de mach wit di rayt tin we dɛn de gi.
If dɛn nid fɔ du spɛshal maykreshɔn tɛst, FDA-rilayt dɔkyumentri, EU fud-kɔntakt dɔkyumentri ɔ ɔda makɛt-spɛsifi k rikwaymɛnt dɛn, dɛn fɔ kɔnfyus dɛn tin ya na di aprɔv prodak spɛsifikɛshɔn bifo mas prodakshɔn.
Risaykul Kɔntinɛnt ɛn CPET
Risaykul-kɔntinɛnt PET strɔkchɔ dɛn kin evalyu fɔ sɔm sɛlɛkɛt CPET aplikeshɔn dɛn, bɔt risaykul kɔntinyu kin afɛkt di apinɛns, prɔsesin ɛn rigyuletɔri rikwaymɛnt dɛn.
Bayer dɛn we nid risaykul kɔntinyu fɔ spɛsifa di target pasɛnt, it-kɔntakt rikwaymɛnt, kɔlɔ, mɛkanikal pefɔmɛns ɛn ɛni chen-ɔf-kustodi ɔ risaykul-kɔntinɛnt dɔkyumentri we dɛn nid.
Yu tink se CPET Risaykul?
CPET na PET-based, bɔt di aktual risaykul akseptans dipen pan di finish trey strɔkchɔ, kɔlɔ, lɛbl, liding film, it kɔntaminɛshɔn ɛn lokal kɔlɛkshɔn ɛn sɔt infrastukchɔ.
So di kɔstɔma dɛn fɔ chɛk di lokal risaykul gayd bifo dɛn mek wan yunivasal risaykul klem bɔt di kɔmplit CPET it pakej.
Kastom Hɛt-Resistant CPET Shit Manufakchurin
HSQY de sɔpɔt kɔstɔm CPET matirial projɛkt fɔ tɛmfɔma, rɛdi-mil manifakta, aylayn-kɛtin saplay, bekeri-pak manifakta ɛn fud-pak distribyushɔn.
Di kɔstɔm opshɔn dɛn kin inklud:
• Kastɔm tiknɛs
• Kastɔm rol wit
• Slit rol saplai
• Kastɔm shit dimɛnshɔn
• Kastɔm rol wet ɛn ɔdasay dayamita
• Blak ɔ wayt CPET
• Gold, silva, krim, grey ɔ ɔda kɔlɔ
• Mat ɔ tɛkstɔr sɔfays
• Kastɔm kristalizayshɔn bihayvya
• Impɛkt-modifyed fɔmyulashɔn
• Risaykul-kɔntinɛnt strɔkchɔ usay i fayn
• Aplikeshɔn-spɛsifi k it-kɔntakt dɔkyumentri
• Kastɔm tɛmfɔmin trayal
• SMƆL TƆK: Ɛkspɔt palet ɛn pak we dɛn nid
Aw fɔ Pik di Rayt CPET Shit
1. Difayn di Finished Tray Aplikeshɔn
Spɛsifik if dɛn go yuz di tre fɔ frɔzɛn rɛdi it, aylayn ketɛning, bek, maykrowev rihit, kɔvɛnshɔnal-ɔvin kuk ɔ ɔda aplikeshɔn.
2. Sho di Tɛmpratura ɛn Taym we yu nid
Gi ɔl tu di maksimal tɛmpracha ɛn di tɛm fɔ ɛksplɔz. Wan tɛmpracha figa we nɔ gɛt di tɛm fɔ ɔt nɔ inof fɔ rilibul matirial sɛlɛkshɔn.
3. Gi di Trey Drawing
Trey lɔng, wit, dip, flɛnch dimɛnshɔn, kɔmpawtmɛnt ɛn fɔm dip inflɔws di rikwayd shit gej ɛn thermoforming prɔses.
4. Kɔnfɔm di Shit Tiknɛs
Di trey sɛmpul dɛn we dɔn de ɛn di tik we di shit tik naw na yusful statin pɔynt dɛn we yu de riples ɔda CPET spɔlayt.
5. Kɔnfɔm di Rol Width ɛn di Mashin Rikwaymɛnt dɛn
Gi thermoforming mashin model, yuzabl wɛb wit, maksimal rol dayamita, kɔr saiz ɛn kɔrɛnt rol spɛsifikɛshɔn usay i de.
6. Pik Kɔlɔ ɛn Sɔfays
Blak ɛn wayt na standad CPET opshɔn dɛn. Di kɔstɔm kɔlɔ ɛn sɔfays fɔ apruv yuz fizik sampul we di apinɛns impɔtant.
7. Kɔnfɔm di tin dɛn we yu nid fɔ kɔntakt fɔ it
Gi di kɔntri we yu de go ɛn di dɔkyumentri we dɛn nid bifo dɛn dɔn di ɛksaktɔl matirial fɔmyulashɔn.
8. Kɔnfɔm di Lidding-Film Rikwaymɛnt dɛn
Spɛsifik di izi-pil ɔ weld-sil rikwaymɛnt, anti-fɔg nid, film strɔkchɔ ɛn ɔt kɔndishɔn.
9. Rɔn Tɛmofɔmin Trayal dɛn
Sampul matirial fɔ tɛst pan di aktual thermoforming layn fɔ kɔnfɔm ɔt, fɔm, kristalizashɔn, trim ɛn stak pefɔmɛns.
10. Validɛt di Pakɛj we dɔn dɔn
Ovin, maykrowev, frɔzɛn-stɔrɔj, transpɔt ɛn silin tɛst fɔ du yuz di fayn trey, it ɛn lidding-film kɔmbayn bifo kɔmɛshɔnal lanch.
CPET Shit Kwaliti Kɔntrol
Kɔnsistɛns raw matirial ɛn shit prɔpati impɔtant fɔ stebul tɛmfɔmin ɛn ɔvin pefɔmɛns.
Rilevɛns inspekshɔn ɛn aprɔval paramita dɛn kin inklud:
• Shit tik ɛn tolɛreshɔn
• Rol wit ɛn tolɛreshɔn
• Rol edj kwaliti
• Rol wayndin
• Kɔlɔ kɔnsistɛns
• Sɔfays kwaliti
• Dɛnsiti
• Krɔstalayzeshɔn bihayvya
• Tɛmofɔmin pefɔmɛns
• Finish trey wɔl-tiknɛs distribyushɔn
• Trey rigiditi
• Flɛnch flatnɛs
• Lɔw-tɛmpracha impak pefɔmɛns
• Ɔvin difɔmeshɔn tɛst
• Maykrowev tɛst
• Lidding-film sial pefɔmɛns
• Fɔd-kɔntakt dɔkyumentri
Pak ɛn Intanɛshɔnal Shipin
CPET kin saplae as masta rol, slit rol, flat shit ɔ kɔstɔm-kat shit dipen pan di kɔstɔma in tɛmfɔmin prɔses.
Dɛn kin protɛkt di rol dɛn wit di rayt we fɔ rap ɛn pak di palet, ɛn dɛn kin pak di shit dɛn insay bɔndɛl dɛn we de protɛkt ɛn plai wud palet fɔ mek dɛn go ebul fɔ kɛr dɛn go na ɔda kɔntri.
Rol wet, rol dayamita, palet kɔnfigyushɔn ɛn kɔntena lod fɔ kɔnfɔm akɔdin to di prodakshɔn mashin ɛn di ples we dɛn de go.
Wetin Mek Yu Pik HSQY as Yu CPET Shit Manufacturer?
CPET Matirial ɛn Finished Tray Supply: HSQY de saplae ɔl tu di CPET thermoforming matirial ɛn wan bɔku bɔku rɛnj fɔ finish CPET Fɔd Trey dɛn.
Waid Tiknɛs Rɛnj: Kɔrɛnt ɔt-rɛsistɛns prodakt dɛn kɔba lɛk 0.12–3.0 mm akɔdin to spɛsifikɛshɔn.
Rol ɛn Shit Sapɔt: Di kɔstɔma dɛn kin tɔk bɔt masta rol, slit rol, flat shit ɛn kɔstɔmayt kɔt dimɛnshɔn.
Kastom Kɔlɔ ɛn Sɔfays: Dɛn kin ebul fɔ evalyu di kɔlɔ ɔ sɔfays we dɛn nid fɔ gɛt blak, wayt ɛn aplikeshɔn-spɛsifi k kɔlɔ.
Thermoforming Support: Yu kin tɔk bɔt matirial sɛlɛkshɔn yuz yu trey drɔin, fɔm dip ɛn ikwipmɛnt infɔmeshɔn.
Lidding Film Supply: HSQY de saplae kompitibul CPET trey siling-film solushons tu fo komplit redi-mil pakej projek.
Samplε fכ Validεshכn: Yu kin yuz di sheet כ rol sεmpl dεm we de fכ thermoforming, oven, microwave εn siling trials bifo mas prodakshכn.
Infɔmeshɔn Nid fɔ wan CPET Shit Kɔt
| Aplay fɔm |
Ridi it, ɔvin trey, bekeri trey, aylayn trey, maykrowev trey ɔ ɔda tin fɔ yuz |
| Maksimal Tɛmpratura |
Di ɔvin ɔ maykrowev kɔndishɔn dɛn we dɛn nid |
| Di tɛm we dɛn kin yuz fɔ ɔt |
Di tɛm we dɛn nid fɔ ɛksplɔz ɔ fɔ kuk |
| Tik we i tik |
Rikwayd statin sheet tik ɛn tolɛreshɔn |
| Rol Width / Shit Sayz |
Wid ɔ flat-shit dimɛnshɔn dɛn we dɛn nid |
| Kɔlɔ |
Blak, wayt ɔ kɔstɔm kɔlɔ |
| Tray Drawing we dɛn de drɔ |
Lɛngth, wit, dip, flɛnch, kɔmpatmɛnt ɛn fɔm dip |
| Mashin we de mek di tɛmmofɔm |
Brand, model, yuzable width ɛn itin kɔnfigyushɔn if i de |
| Lidding Film we dɛn kɔl |
I izi fɔ pul, weld sil, anti-fɔg, printin ɔ ɔda tin we yu nid |
| Rikwaymɛnt fɔ di Rigyuletɔri |
Di kɔntri we dɛn de go ɛn di dɔkyumɛnt dɛn we dɛn nid fɔ kɔntakt fɔ it |
| Ɔmɔs |
Trayal kwantiti, rɛgyula ɔda kwantiti ɛn ɛstimat ɛni ia dimand |
| Usay yu de go |
Di kɔntri we dɛn de go ɛn di pɔt |
CPET Sheet we nɔ de ɔt FAQ
Wetin CPET tinap fɔ?
CPET tinap fɔ kristalin polyethylene terephthalate. Na PET-based matirial we dɛn ɛnjinia fɔ divɛlɔp inof kristaliniti fɔ impɔtant dimɛnshɔnal stebiliti na ɛlevɛt tɛmpracha.
Wetin na PET sheet we gɛt ay tɛmpracha?
Insay ɔvinable it pak, ay-tɛmpracha PET kin ɔltɛm tɔk bɔt CPET sheet. Bɔt ɔda modifyed PET matirial dɛn kin bak fɔ makɛt as ɔt-rɛsistant PET fɔ industrial aplikeshɔn, so bayer dɛn fɔ kɔnfɔm di ɛksaktɔ matirial gred.
Wetin na di difrɛns bitwin CPET ɛn APET?
APET na big wan amorphous ɛn dɛn kin pik am fɔ klia chill-fud ɛn rital pak. CPET de divεlכp wan mכr kristalin strכkchכ εn dεn de sεlekt am usay di tεy we dεn dכn nid fכ bכku hεy-tεmprachכ dimεnshכnal stεbiliti.
Us tɛmpracha HSQY CPET sheet kin ebul fɔ bia?
Di kɔrɛnt fichu HSQY ɔt-rɛsistant CPET gred na dizayn fɔ finish-trey aplikeshɔn dɛn te to lɛk 350°F / 177°C ɔnda validet kɔndishɔn dɛn. Ɔda CPET fɔmyulashɔn dɛn kin nid fɔ gɛt sɛpret tɛst ɛn tɛknikal kɔnfɔmeshɔn.
CPET kin ebul fɔ bia wit 200°C?
Sɔm CPET sistem dɛn na di makit dɛn mek am fɔ ay tɛmpracha, bɔt dɛn nɔ fɔ trit 200°C as yunivasal valyu fɔ ɛvri CPET gred. If yu aplikeshɔn nid 200°C, gi di tɛm fɔ ɔt, di lod fɔ it ɛn di trey jɔyometri fɔ evalueshɔn fɔ gred-spɛsifi k.
CPET kin ebul fɔ bia wit 350°C?
HSQY nɔ de rikɔmɛnd fɔ trit 350°C as standad CPET savis tɛmpracha. Tɛmpratura kapabiliti fɔ bi bays pan di aprɔv matirial gred ɛn validet finish-pakɛj tɛst. Nɔ kɔnfyus 350°F wit 350°C.
Yu tink se CPET ɔvin sef?
Dɛn kin mek fayn CPET trey dɛn fɔ kuk na kɔmɔn ɔvin. Faynal ɔvin suitability dipen pan di spesifik CPET gred, trey jɔyometri, it lod, kuk tɛmpracha ɛn kuk durayshɔn.
Yu tink se CPET maykrowev sef?
Yu kin yuz fayn CPET trey sistem fɔ maykrowev rihit afta dɛn dɔn validet di trey we dɔn dɔn, it lod ɛn maykrowev saykl.
CPET kin go frɔm friza to ɔvin?
Sɔm CPET strɔkchɔ dɛn we dɛn mek fɔ friza-to-ɔvin rɛdi-mil aplikeshɔn dɛn. Lɔw-tɛmpracha impak pefɔmɛns ɛn ay-tɛmpracha kuk pefɔmɛns ɔl tu fɔ kɔnfyus yuz di pakej we dɔn dɔn.
Wetin mek CPET kin bi blak ɔ wayt?
Kristalayzeshɔn de ridyus di transparency we nɔmal fɔ gɛt fɔ du wit amorphous PET. As a rizulyt, konvεshכnal CPET fud trey dεm jεnarali opεk כ translucent, wit blak εn wayt na kכmכn kכmεshכnal kכla.
Yu tink se transparent CPET de?
Konvεnshכnal hεli kristכlayz CPET nכ nכmal kristכl klia. If transparency ɛn elevated-temperature performance ɔl tu nid, dɛn fɔ evalyu wan aplikeshɔn-spɛsifi k PET strɔkchɔ sɛpret.
Us tiknes fɔ CPET sheet HSQY de saplae?
HSQY in kɔrɛnt ɔt-rɛsistant CPET prodak rɛnj kɔba lɛk 0.12–3.0 mm. Eksakt tiknes avaylabl ɛn tolɛreshɔn fɔ kɔnfyus akɔdin to di wit ɛn aplikeshɔn we dɛn nid.
HSQY kin saplae CPET insay rol?
Yɛs. CPET kin saplae as masta rol ɔ slit rol fɔ thermoforming aplikeshɔn. di kכrant rol width dεm de εkstend to aprכksimatli 1300 mm dipכnt pan spεsifikεshכn.
Yu tink se CPET sheet kin bi kɔstɔm slit?
Kastom rol wit dɛn kin tɔk bɔt akɔdin to tik, mashin wɛb wit, slitin tolɛreshɔn ɛn ɔda kwantiti.
Yu tink se CPET kin bi vaykum fɔm?
Yɛs. Suitabl CPET shit kin prosɛs yuz thermoforming, vaykum fɔm, prɛshɔn fɔm ɛn plɔg-asist fɔm. Krystalayzeshɔn ɛn mold-tɛmpracha kɔntrol impɔtant mɔ.
Us prɔdak dɛn dɛn mek wit CPET sheet?
Di tin dɛn we dɛn kin mek na trey dɛn we dɛn kin yuz fɔ it rɛdi it we dɛn kin ɔvin, tin dɛn we dɛn kin put it na di aylayn, bekɛri tre, frɔzɛn-fud tre, maykrowev tre ɛn ɔda it paket dɛn we dɛn kin mek wit tɛmpracha we gɛt ay tɛmpracha.
Yu tink se dɛn kin ɔt sial di CPET trey dɛn?
Yɛs. Suitabl CPET trey-ɛn-film sistem dɛn kin yuz ɔt-sial liding film dɛn. Silant strɔkchɔ, flɛnch jɔyometri ɛn silin paramita dɛn fɔ mach to di trey ɛn fayn ɔt aplikeshɔn.
CPET kin yuz izi-pil lidding film?
Easy-peel lidding solutions de fɔ sɔm CPET trey sistem dɛn we dɛn dɔn pik. Pil trɛnk ɛn ɔt pefɔmɛns fɔ kɔnfɔm yuz di aktual trey ɛn film.
CPET fayn fɔ kɔntakt it?
Aplikeshɔn-spɛsifi k it-kɔntakt CPET fɔmyulashɔn dɛn de. Dokumɛnt fɔ kɔnfyus fɔ di ɛksaktɔ fɔmyulashɔn ɛn dɛstineshɔn makɛt pas fɔ aplay wan jenɛral stetmɛnt to ɔl di CPET prodak dɛm.
Yu tink se CPET kin risaykul?
CPET na PET-based, bɔt di aktual risaykul akseptɛns dipen pan trey kɔlɔ, it kɔntaminɛshɔn, lɛbl, lid film ɛn lokal kɔlɛkshɔn ɛn risaykul infrastukchɔ.
Yu tink se CPET kin gɛt PET we dɛn dɔn risaykul?
Risaykul-kɔntinɛnt strɔkchɔ dɛn kin ebul fɔ evalyu fɔ sɔm aplikeshɔn dɛn we dɛn dɔn pik. Di risaykul pasɛnt we dɛn nid, di fud-kɔntakt stetɔs ɛn di pefɔmɛns spɛsifikɛshɔn dɛn fɔ gi bifo dɛn pik di fɔmyulashɔn.
HSQY kin kɔstɔmayz CPET kɔlɔ dɛn?
Yɛs. Blak ɛn wayt na standad opshɔn, we dɛn kin ebul fɔ evalyu gold, silva, krim, grey ɛn ɔda kɔlɔ dɛn akɔdin to di spɛsifikɛshɔn ɛn prodakshɔn volyum.
A kin aks fɔ CPET sɛmpul dɛn?
A4 sheet dɛn we de, kɔstɔm-kat sɛmpul ɔ limited rol sɛmpul dɛn kin tɔk bɔt fɔ thermoforming ɛn pefɔmɛns tɛst.
Us infɔmeshɔn dɛn nid fɔ gɛt CPET kot?
Gi tik, rol wit ɔ sheet saiz, kɔlɔ, trey drɔ, tɛmpracha ɛn ɔt tɛm we yu nid, tɛmfɔmin mashin infɔmeshɔn, it-kɔntakt rikwaymɛnt, kwantiti we yu bay ɛn usay yu de go.
Rikwest wan Hɛt-Resistant CPET Shit Kɔt
Yu de luk fɔ wan rilibul ɔt-rɛsistant CPET shit manifakta , ovenable PET rolstɔk spɔlayt ɔ kɔstɔmayz tɛmfɔmin matirial fɔ rɛdi-mil trey?
Send HSQY yu tiknes we yu nid, rol wit, trey drɔ, ɔvin ɔ maykrowev kɔndishɔn ɛn ɛstimat kwantiti we yu bay. Wi tim kin evalyu di aprɔpriet CPET matirial, gi sɛmpul fɔ thermoforming trayal ɛn ɛp fɔ mach di sheet wit finish CPET trey ɛn kɔmpitabl lidding film.
