HI PS shit fɔ Mɔdel Mek & Protɔtayp

HI PS shit fɔ Mɔdel Mek & Protɔtayp

HSQY HIPS sheet matirial na laytwɛt, impak-rɛsistɛns ɛn izi fɔ mek fɔ akitekchral mɔdel, skel mɔdel, protɔtayp, mɔk-ap, displei ɛn tɛmɔfɔm pat, wit 0.2-6mm tik ɛn kɔstɔm kɔlɔ.

High Impact Polystyrene, we dɛn kin kɔl HIPS ɔ styrene sheet matirial , na rɔba-modified polystyrene matirial we de gi big tafnɛs pas standad GPPS we i de stil izi fɔ kɔt, shep, bon, peint, print ɛn thermoform.

Fɔ di wan dɛn we de mek mɔdel, di akitekchɔral styudio dɛn, di protɔtayp wokshɔp dɛn ɛn di industrial disayna dɛn, HIPS de gi wan prɛktikal kɔmbaynshɔn fɔ lɔw wet, rigiditi, sɔfayz kwaliti ɛn ikɔnomik fabrikeshɔn. HSQY in kɔrɛnt rɛnj de kɔba lɛk 0.2mm to 6mm tik ɛn waid te to 1600mm.

HIPS Model Mek Shit Spɛsifikeshɔn dɛn

Spɛsifikeshɔn Notis: Tiknɛs, rigiditi, kɔlɔ, sɔfayz finish, dimɛnshɔn ɛn prɔsesin pefɔmɛns fɔ kɔnfɔm akɔdin to di ɛksaktɔ HIPS gred ɛn mɔdel-mɛkin ɔ protɔtayp aplikeshɔn.

Wetin Mek Yuz HIPS fɔ Mek Mɔdel?

HIPS na in dεn de yuz bכku fכ mek mכdel biכs dεn kin kכnvכlt am to flat panεl, kכv shεl, strכkchכral rib, dεkorεtiv sεf εn ditayl kכmכpכnεnt dεm we de yuz rili strεt fכ mek mεtכd dεm.

We yu kɔmpia am wit mɔ brital standad polistayn, rɔba-modify HIPS de gi big tafnɛs we dɛn de kɔt, handel ɛn asɛmbli. Dis kin yus mɔ we di protɔtayp kɔmpɔnɛnt dɛn nid fɔ fit, drɔ, bon ɔ wok bak bɔku tɛm.

• I izi fɔ kɔt: Dɛn kin prosɛs tin ɛn midul-gej HIPS fɔ mek dɛn gɛt ditayla shep dɛn bay we dɛn yuz fayn an ɔ mashin tul dɛn.

• Gud dimɛnshɔnal stebiliti: Yusful fɔ flat panɛl, tɛmplat ɛn ripit mɔdel kɔmpɔnɛnt dɛn.

• Layt wet kɔnstrɔkshɔn: I de ɛp fɔ mek big akitɔk ɛn prɛzɛntɛnshɔn mɔdel dɛn ebul fɔ manej.

• Smɔl sɔfa: I fayn fɔ peint, print, lɛbl ɛn dɛkɔretiv finish wit kɔmpitabl sistɛm.

• Bondable: Dɛn kin yuz kɔmpatibl bonding sistem fɔ asembl layt mɔdel ɛn protɔtayp strɔkchɔ.

• Tεmכfכmabl: Hεt HIPS kin shep insay kכv shεl, εnkloz εn tri-dimεnshכnal mכdel kכmכpכnt dεm.

• mכltipכl tiknes dεm: dεn kin kכmbayn difrεn gej dεm insay wan mכdel fכ mek tin skin, intanεt rib dεm εn rigid strכkchכral panεl dεm.

HI PS shit fɔ Akitekchral Mɔdal dɛn

Di wan dɛn we de mek akitekchral mɔdel kin yuz tin HIPS sheet matirial s fɔ mek wɔl, fasad, ruf panɛl, intanɛnt patishɔn, pletfɔm ɛn dɛkɔretiv ditil.

Dɛn kin kɔt di matirial insay jɔyometrik shep dɛn we dɛn kin ripit ɛn gɛda am insay layt strɔkchɔ dɛn. Wait HIPS na patikyula yusful usay di finish akitekchral mɔdel go leta peint ɔ prɛzɛnt insay nyutral wan kɔlɔ finish.

Fɔ big akitekchral mɔdel dɛn, dɛn fɔ pik tiknɛs akɔdin to di span we nɔ sɔpɔt, di flat we dɛn nid ɛn di amɔnt fɔ intanɛnt strɔkchɔral sɔpɔt we dɛn yuz na di mɔdel.

HI PS shit fɔ Skel Mɔdal dɛn

Di wan dɛn we de mek skel-mɔdel kin yuz HIPS fɔ bɔdi panɛl, motoka kɔmpɔnɛnt dɛn, smɔl smɔl strɔkchɔ dɛn, mashin mɔdel dɛn, dayɔrama dɛn ɛn layt sɔfa ditil dɛn.

Tin sheet matirial s dɛn fayn fɔ smɔl-smɔl panɛl ɛn fayn fayn ditel dɛn, we tik matirial kin gi sɔpɔt fɔ freym, bays ɛn strɔkchɔral kɔmpɔnɛnt dɛn.

We wan prɔjek nid fɔ ripit kɔmɛshɔnal prodakshɔn pas fɔ yuz wan wan ɔbi, di wan dɛn we de bay fɔ spɛsifa di dimɛnshɔn dɛn we dɔn dɔn, kwantiti fɔ ɛni mɔdel ɛn di we aw dɛn de kɔt so dat dɛn go ebul fɔ evalyu di matirial yield.

HI PS shit fɔ Prodakt Protɔtayp dɛn

HIPS yusful fɔ di fɔs stej prodak divɛlɔpmɛnt bikɔs dizayna dɛn kin mek haus, panɛl, kɔva, trey dɛn ɛn vijual protɔtayp kwik kwik wan bifo dɛn invɛst insay prodakshɔn tul.

Flat sheet matirial s kin kɔt ɛn bon insay bɔks-tayp protɔtayp, we dɛn kin yuz tɛmfɔmin ɔ vaykum fɔm we di kɔnsɛpt nid kɔv sɔfays ɔ tri-dimɛnshɔnal shɔɛl.

Fɔ fɛnshɔnal protɔtayp dɛn we dɛn dɔn ɛksplɔz to signifyant lod, ɔt ɔ kemikal, dɛn fɔ evalyu di fayn prodakshɔn matirial rikwaymɛnt dɛn sɛpret. Wan HIPS protɔtayp we fit fɔ si nɔ min ɔtomɛtik wan se HIPS na di kɔrɛkt injinɛri matirial fɔ di kɔmpɔnɛnt we dɛn mek wit mas.

HI PS shit fɔ Mɔk-Ap & Prɛzɛntɛnshɔn Mɔdel dɛn

Bɔku tɛm, prɛzɛntɛnshɔn mɔk-ap dɛn nid klin say we dɛn kin kɔt, sand, peint ɛn gɛda kwik kwik wan. HIPS kin sɔpɔt dɛn rikwaymɛnt ya we i de kɔntinyu fɔ layt ɛn izi fɔ mek pas bɔku injinɛri plastic dɛn.

Tipik aplikeshɔn dɛn inklud industrial-dizayn mɔk-ap, ɛgzibishin protɔtayp, pak kɔnsɛpt, aplayans kɔnsɛpt, prodak ɛnklɔzhɔ ɛn demonstreshɔn mɔdel.

Aw fɔ Pik HIPS Tik fɔ mek Mɔdel

Dis na jenɛral sɛlɛkshɔn dairekshɔn dɛn. Di kɔrɛkt tiknɛs dipen pan di kɔmpɔnɛnt saiz, di span we dɛn nɔ sɔpɔt, di mɔdel skel, di fleksibiliti we dɛn want, di we aw dɛn de kɔt ɛn di rigiditi we dɛn nid.

Cutting HI PS shit fɔ Mɔdel & Protɔtayp

Di aprɔpriet we fɔ kɔt dipen mɔ pan sheet matirial tik, di akkuracy we dɛn nid ɛn di prodakshɔn kwantiti.

Di ɔrijinal prodak infɔmeshɔn de rɛfrɛns bak fɔ kɔt wit lɛsa. Usay dɛn de tink bɔt lɛsa prɔsesin, dɛn fɔ ebul fɔ evaluate di ikwipmɛnt kɔmpitibliti, faya risk, fum, ventileshɔn ɛn finish-edj kwaliti wit di ɛksaktɔl HIPS gred bifo dɛn prodyuz. Bɔku tɛm, i kin izi fɔ kɔntrol wit mɛkanikal kɔt fɔ di aplikeshɔn dɛn we dɛn kin yuz fɔ mek mɔdel.

Bonding HIPS Mɔdal Kɔmpɔnɛnt dɛn

Bɔku tɛm di wan dɛn we de mek mɔdel kin gɛda HIPS kɔmpɔnɛnt dɛn insay layt wɔl, freym, haus ɛn kɔmpleks protɔtayp strɔkchɔ dɛn. Dɛn kin ebul fɔ evaluate kɔmpatibl adhesives ɔ solvent-bonding systems akɔdin to di joyn dizayn ɛn di apinɛns we dɛn nid.

Bonding pefomans fɔ tɛst wit di aktual matirial bikɔs kɔlɔrant, sɔfayz kɔndishɔn, adhesive kemistri ɛn jɔyn jɔyometri kin inflɔws fayn trɛnk.

Peint HIPS Mɔdal & Protɔtayp dɛn

Di smol HIPS surface kin peint ɛn finish fɔ akitekchral mɔdel, prɛzɛnt protɔtayp ɛn displei kɔmpɔnɛnt dɛn we dɛn yuz kɔmpitabl kɔtin sistɛm.

Sɔfayz klin, prayma kɔmpatibiliti ɛn pent kemistri fɔ tɛst bifo dɛn prodyuz. Agresiv sכlvεnt kin afekt polistayn, so kכt sistεm dεm fכ validet pan wan rεprεsεntεtiv sεmpl fכs.

Printin & Mak HI PS shit

HIPS kin sɔpɔt print grafik, aydentifikeshɔn mak, skel, lɛbl ɛn dɛkɔretiv finish fɔ mɔdel, protɔtayp panɛl, displei ɛn prɛzɛnt kɔmpɔnɛnt dɛn.

Ink adheshon dipen pan surface finish, printin proses, ink kemistri en curing kondishon. Prodakshɔn printin fɔ tɛst pan di aktual matirial bifo bɔku kɔnvɔshɔn.

Tɛrmofɔmin HIPS fɔ Protɔtayp Pat dɛn

HIPS kin ɔt ɛn fɔm insay tri-dimɛnshɔnal protɔtayp kɔmpɔnɛnt usay flat- sheet matirial fabrikeshɔn nɔ kin ebul fɔ riprodyuz di jɔyometri we dɛn nid.

Tipik protɔtayp aplikeshɔn dɛn inklud ɛnklɔzhɔ shel, aplayans kɔnsɛpt, mɔdel motoka bɔdi, prodak haus, trey dɛn , kɔva kɔva ɛn displei kɔmpɔnɛnt dɛn.

Wait vs. Blak HIPS fɔ Mɔdel Mek

HIPS vs. GPPS fɔ Mɔdal Mek

HIPS vs. ABS fɔ Protɔtayp Mɔdel dɛn

Ɔda Aplikeshɔn dɛn fɔ HI PS shit

Pan ɔl we dis prɔdak pej de tɔk mɔ bɔt fɔ mek mɔdel ɛn fɔ mek protɔtayp, dɛn kin yuz HIPS bak fɔ pak, displei, sayn, aplayans kɔmpɔnɛnt ɛn ɔda prɔdak dɛn we dɛn mek wit tɛmɔfɔm ɔ we dɛn mek.

Rigyulayt fud-kɔntakt, mɛdikal, sterilayzeshɔn, ɔtomotiv ɔ ɔda spɛshal aplikeshɔn dɛn nid fɔ kɔnfɔm di ɛksaktɔ gred ɛn aplikebul tɛknikal dɔkyumentri. Standard model-making HIPS nɔ fɔ ɔtomɛtik asum se i fit fɔ dɛn aplikeshɔn dɛn de.

Us Infɔmeshɔn Yu Fɔ Gi Fɔ Kot?

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt HI PS shit fɔ mek Mɔdal

Wetin na HIPS sheet matirial ?

HIPS tinap fɔ Ay Impɛkt Polistayn. Na rɔba-modifyed polistayn we dɛn mek fɔ gi big tafnɛs pas standad GPPS we i de kip gud rigiditi ɛn fabrikeshɔn pefɔmɛns.

Wetin mek dɛn de yuz HIPS fɔ mek mɔdel?

HIPS na layt, rigid ɛn rili izi fɔ kɔt, bon, peint ɛn tɛmfɔm, we mek i yusful fɔ akitekchral mɔdel, skel mɔdel, protɔtayp ɛn mɔk-ap.

Us tik we fayn fɔ mek akitɔk mɔdel dɛn?

Tin 0.2-0.5mm sheet matirial s kin yuz fɔ fayn ditel ɛn sɔfa layers, we 0.5-1mm na yusful fɔ jenɛral mɔdel panɛl. big strכkchכral kכmכpכnεnt dεm kin nid 1mm כ tik sheet matirial dipכnt pan saiz εn sכpכt.

Us tiknes rɛnj HSQY de saplae?

Di kɔrɛnt prodakt spɛsifikɛshɔn kɔba lɛk 0.2mm to 6mm.

Wetin na di maksimal sheet matirial wit?

Di kɔrɛnt prodakt spɛsifikɛshɔn de list di wit dɛn we go rich lɛk 1600mm.

Us kɔlɔ dɛn de?

Di kɔrɛnt prodak spesifikeshɔn de list wayt, blak ɛn kɔstɔmayt kɔlɔ dɛn.

Yu tink se tin HIPS sheet matirial kin kɔt wit nɛf?

Tin HIPS kin skor ɛn kɔt yuz fayn an tul dɛn dipen pan di tik. Tik matirial kin bɛtɛ fɔ saw, router, day kɔt ɔ CNC mashin.

Yu tink se HIPS sheet matirial kin bi CNC mashin?

Yɛs. HIPS kin drɔl, rout ɛn CNC mashin yuz fayn tul ɛn prɔsesin paramita.

Yu tink se HIPS sheet matirial kin glu?

Kompatibl adhesives en bonding systems kin yuz fכ asembl HIPS pat dεm. Bond strכng εn sכfayz apinεns fכ tεst yuz di aktual sheet matirial gred.

Yu tink se HIPS sheet matirial kin peint?

Yɛs. HIPS kin peint wit kompitibul kotin sistem. Dɛn fɔ tɛst di pent, prayma ɛn di tin dɛn we dɛn kin yuz fɔ klin bikɔs agresiv sɔlvɛnt dɛn kin afɛkt di polistayn.

Yu tink se HIPS sheet matirial kin thermoformed?

Yɛs. HIPS na tin we dɛn kin yuz bɔku bɔku wan fɔ mek dɛn de mek tɛm ɛn fɔ mek vaykum. Start tiknes fɔ pik akɔdin to mold jɔyometri ɛn rikwayd finished wɔl tik.

Yu kin yuz HIPS fɔ protɔtayp haus?

Yɛs. HIPS kin mek ɔ thermoformed insay vijual protɔtayp haus, kɔva ɛn ɛnklɔzhɔ. Fכnshכnal-pεrformεns rikwaymεnt dεm fכ evaluate sεparat wan usay di protכtayp de εkspos to bכku hεt, lod כ kεmikכl.

Wetin na di difrɛns bitwin HIPS ɛn GPPS fɔ mek mɔdel?

HIPS na nכmal opεk εn taf, we de mek i yusful fכ fabricated strכkchכral εn fכm mכdel kכmכpכnt dεm. GPPS nɔmal wan klia ɛn i fayn mɔ we transparency nid fɔ de.

Yu tink se HIPS kin kɔt wit laser?

Di ɔrijinal HSQY prodak infɔmeshɔn list laser kɔt as pɔsibul prɔses. Di ikwipmɛnt kɔmpitibliti, ventileshɔn, faya risk, fum ɛn ed kwaliti fɔ evalyu wit di ɛksaktɔ matirial bifo dɛn prodyuz; mεkanikal kכt na in dεn kin fכs fכ rutin mכdel fכ mek.

Standard HIPS fit fכ mεdikal כ sterilizebl mכdel dεm?

Standart mכdel-mek HIPS nכ fכ trit כtomatכk lεk mεdikal-grεd כ stεrilayzεshכn-kכmpatibl mεtirial. Medikal projɛkt dɛn nid fɔ kɔnfɔm di ɛksaktɔl rɛsin gred, sterilayzeshɔn we ɛn aplikebul dɔkyumentri.

Wetin na di MOQ?

Di kɔrɛnt prodak spesifikeshɔn de list wan minim ɔda kwantiti we na 1000 kg. Dɛn fɔ kɔnfyus di tin dɛn we dɛn nid fɔ du fɔ tray ɔ fɔ sampul dɛnsɛf.

Wetin na di tɛm we dɛn kin sɛn di tin?

Di kɔrɛnt prodak spɛsifikɛshɔn de list lɛk 7-15 dez afta dipɔsit, dipen pan di ɔda we dɛn dɔn kɔnfyus ɛn di prodakshɔn schedule.

Us infɔmeshɔn a fɔ gi fɔ kot?

Duya gi di mɔdel ɔ protɔtayp aplikeshɔn, tiknɛs, sheet matirial dimɛnshɔn, kɔlɔ, we fɔ kɔt, bond ɔ peint rikwaymɛnt, tɛmfɔmin infɔmeshɔn usay i apɔynt, kwantiti ɛn ples fɔ go.

Pak & Delivri fɔ di wok

Di prɔdak infɔmeshɔn we de naw de list di protɛktiv sampul pak, paletayz bɔlk pak ɛn FOB, CIF ɔ EXW delivri tɛm. Shit fɔ protɛkt frɔm skrach, kɔntaminɛshɔn ɛn ed damej we dɛn de kip ɛn intanashɔnal transpɔt.

HSQY Plastik Grup Ɛgzibishin dɛn

HSQY Plastik Grup mit plastic- sheet matirial distribyushɔn, mɔdel ɛn protɔtayp manifakta, tɛmɔfɔma, displei kɔmni ɛn industrial bayer dɛn na intanashɔnal industri ɛgzibishin.

Sɛtifiket dɛn & Dokumɛnt dɛn

Di prodak pej we de naw de rifer to SGS ɛn ISO 9001:2008. Di wan dɛn we de bay fɔ kɔnfɔm se di sɛtifiket ɔ tɛst dɔkyumɛnt we de de aplay to di ɛksaktɔl HIPS gred ɛn di aplikeshɔn we dɛn bin want fɔ yuz bifo dɛn gɛt tɛknikal aprɔval.

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae HIPS , GPPS ɛn ɔda plastic sheet matirial matirial fɔ mɔdel manifakta, protɔtayp wokshɔp, tɛmɔfɔma, displei manifakta, pak kɔmni ɛn industrial fabricatɔ. Tiknes, sheet matirial dimɛnshɔn, kɔlɔ ɛn dawɔnstrim fabrikeshɔn rikwaymɛnt dɛn kin tɔk bɔt akɔdin to di prɔjek.

Polistayn Plastik shit s fɔ Mɔdel Mek Prodakt Diskripshɔn

HSQY Plastic Group in polistayn plastic sheet matirial s, inklud ay impak polistayn ( HIPS ), na versatile thermoplastic matirial we dɛn mek fɔ mek mɔdel, pak, ɛn sayn. Ofa fayn fayn mɛkanikal prɔpati, izi prɔsesabiliti, ɛn ay impak rɛsistɛns, dɛn laytwɛt, kɔst-ɛfɛktiv sheet matirial s ya kin kɔstɔmayz insay difrɛn kɔlɔ ɛn saiz dɛn. Ideal fɔ B2B klaynt dɛn na manufakchurin, dizayn, ɛn protɔtayp industri dɛn we de luk fɔ sɔlvishɔn dɛn we dɛn kin abop pan.

HI PS shit Spɛsifikeshɔn dɛn

Ki Ficha dɛn fɔ Polistayn Shit

• High impact resistance wit rubber modifiers fɔ mek i nɔ krak

• I izi fɔ mek: i de sɔpɔt fɔ kɔt wit lɛsa, fɔ mek tɛmmofɔm, ɛn fɔ print

• Layt ɛn rigid fɔ transpɔt ɛn yuz we nɔ de tek bɔku mɔni

• I nɔ de gri wit wata, diluted asid, alkali, ɛn alkol

• Smɔl surface fɔ ay kwaliti printin ɛn branding

Kontakt Wi fɔ wan Quote

Aplikeshɔn dɛn fɔ Plastik shit fɔ Prototyping

Wi polistayn sheet matirial s dɛn fayn fɔ B2B klaynt dɛn na industri dɛn lɛk:

• Model mek: Prototypes, skul projɛkt, ɛn kraft

• Di tin dɛn we dɛn kin pak: Trey, klamshɛl, ɛn blista pak dɛn

• Sayn: Ritayl sayn, POP displei, ɛgzibishin panɛl

• Otomotiv: Trim intɛriɔ, dashbɔd, kɔva dɛn we de protɛkt

• Di tin dɛn we pipul dɛn kin yuz: Frij layna, tɔys pat dɛn

• Medikal: Sterilizabl trey dɛn , ikwipmɛnt kɔva

Packaging ɛn Delivery fɔ Polistayn Shit

• Sampul Pak: Dɛn rap am wit fim we de protɛkt am, pak am insay katon.

• Bulk Packaging: Shit dɛn we de pan palet, we dɛn rap wit strɛch fim.

• Pallet Packaging: Standart ɛkspɔt palet, kɔstɔmayz fɔ ɛni klaynt rikwaymɛnt.

• Kontena Loading: Optimized fɔ 20ft/40ft kɔntena, mek shɔ se sef transpɔt.

• Dilivri Tɛm dɛn: FOB, CIF, EXW.

• Lid Taym: 7-15 dez afta dipɔsit, dipen pan ɔda volyum.

  
  

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm (FAQ) Bɔt Polistayn Plastik shit s

Polistayn Plastik shit s Sef fɔ Mek Mɔdel?

Yes, wi HIPS sheet matirial s sef fɔ mek mɔdel, we de gi izi fabrication ɛn durability fɔ prɛsis kraft.

A kin Kastam Polistayn Shit fɔ Protɔtayp?

Yɛs, wi de gi yu tik, waid, ɛn kɔlɔ dɛn we yu kin kɔstɔmayz fɔ mit yu patikyula prɔjek nid dɛn.

Us Sɛtifiket Yu High Impact Polistayn (HIPS) Shit dɛn Gɛt?

Wi sheet matirial s dɛn gɛt sɛtifiket frɔm SGS ɛn ISO 9001:2008, we de mek shɔ se kwaliti ɛn rilaybiliti.

Wetin Na di Minim Ɔda Kwantiti (MOQ) fɔ Polistayn Plastik shit s?

Di MOQ na 1000 kg, wit fleksibiliti fɔ smɔl sampul ɔ trayal ɔda.

Aw Lɔng Delivri De Tek fɔ Polistayn Shit?

Delivery tek 7-15 dez afta diposit, dipen pan oda saiz en ples.

Bɔt HSQY Plastik Grup

Wit ova 20 ia ekspiriens, HSQY Plastic Group de opereyt 8 faktri en dem trost am fo di wold fo hai-kwaliti plastic solushon. SGS ɛn ISO 9001:2008 we gɛt sɛtifiket, wi spɛshal pan tayla prɔdak fɔ pak, kɔnstrɔkshɔn, ɛn mɛdikal industri. Kɔntakt wi fɔ tɔk bɔt wetin yu nid fɔ du fɔ yu prɔjek!

SHO

SƐTIFIKƐSHƆN

Kontakt Wi fɔ wan Quote