Klia Polikabɔnɛt Film

Klia Polikabɔnɛt Film Manufacturer & Supplier

HSQY Plastik de mek ɛn saplae klia polycarbonate film fɔ grafik ɔvlay, mɛmbran switch, inschrumɛnt panɛl, nem plet, lɛbl, ilɛktronik displei, in-mold dɛkɔreshɔn, printin, day kɔt, tɛmfɔmin ɛn ɔda prɛsishɔn industrial aplikeshɔn dɛn.

Dɛn kin kɔl am bak klia PC film, transparent polycarbonate film ɔ polycarbonate film rol, dis injinɛri tɛmplastik de kɔba ay transparency, impak resistans, dimɛnshɔnal stebiliti, ɔt rɛsistɛns ɛn gud sɛkɔndari-prɔsesin pefɔmɛns.

HSQY de saplae transparent polycarbonate film in multiple tiknes, witths en surface finish inklud polished, glossy, fayn mat, mat, velvet/textured en selekt had-coated opshons. di kכrant klia-film prodakt dεm inklud tiknes frכm lεk 0.125 mm to 1.0 mm , wit wit we de rich lεk 1220 mm fכ sεlekt gred dεm.

Standart klia PC film, optik-grɛd film, UV-rɛsistant film, flame-ritardant film ɛn had-kɔt film gɛt difrɛn pefɔmɛns spɛsifikɛshɔn dɛn. Tɛl HSQY yu aplikeshɔn, tik, optik rikwaymɛnt, printin we, sɔfa finish ɛn funkshɔn rikwaymɛnt so dat dɛn go pik di kɔrɛkt gred.

Wetin Na Klia Polikabɔnɛt Fim?

Klia polycarbonate film na wan tin transparent film we dɛn mek wit polycarbonate, we na wan ay-pafɔmɛnshɔn injinɛri tɛmplastik we dɛn sabi fɔ in tafnɛs, tɛmal stebiliti ɛn dimɛnshɔnal stebiliti.

Nɔ lɛk tik sɔlid polikabɔnɛt panɛl dɛn we dɛn kin yuz fɔ ruf ɛn glaz, dɛn kin jɔs saplae PC film insay rili tin gej fɔ print, fɔm, day kɔt, lamineshɔn, insuleshɔn ɛn prɛsishɔn kɔmpɔnɛnt prodakshɔn.

Klia PC film kin gi ay layt transmishɔn we i de mentɛn signifyant big impak rɛsistɛns pas bɔku kɔvɛnshɔnal transparent plastic dɛn. Dipen pan gred ɛn sɔfa, i kin gi bak fayn fayn printin rɛjista, ɔt rɛsistɛns ɛn dimɛnshɔnal stebiliti.

Dɛn prɔpati ya de mek polycarbonate film patikyula yusful fɔ ilɛktroniks, ɔtomotiv intɛriɔ, industrial grafik, mɛmbran switch, aplayans kɔntrol, aydentifikeshɔn prodak ɛn fɔm dɛkɔretiv kɔmpɔnɛnt dɛn.

Klia Polikabɔnɛt Film Spɛsifikeshɔn dɛn

HSQY de saplae plɛnti klia PC fim gred dɛn. Faynal valyu dɛn dipen pan tik, rɛsin, sɔfayz finish ɛn fɛnshɔnal spɛsifikɛshɔn. Di tebul we de dɔŋ ya de sɔmariz di kɔmɔn opshɔn dɛn we de naw.

Optik prɔpati, tiknɛs tolɛreshɔn, sɔfays rɔfnɛs, flaym retinj, UV rɛsistɛns, had-kot pefɔmɛns ɛn ilɛktrik prɔpati dɛn fɔ ɔltɛm kɔnfɔm agens di ɛksaktɔ PC film gred pas fɔ asum frɔm di jenɛral matirial nem.

Ki Prɔpati dɛn fɔ Klia Polikabɔnɛt Film

Ay Transparency we pɔsin kin gɛt

Suitabl transparent PC film kin gi aprɔksimatli 89%–92% layt transmishɔn, we de mek dɛn yusful fɔ grafik ɔvlay, displei, transparent winda ɛn baklit kɔmpɔnɛnt dɛn.

High Impact Resistance we gɛt ay impak

Polycarbonate na valyu fɔ in taf ɛn impak resistans. Dis kin gi big durabiliti pas mɔ brittle transparent matirial dɛn na industrial kɔntrol panɛl, ɔvlay, ilɛktronik prodak ɛn fɔm kɔmpɔnɛnt dɛn.

Dimɛnshɔnal Stebiliti

Gud dimɛnshɔnal stebiliti impɔtant mɔ pan mɔlti-layer printin, day-kat kɔmpɔnɛnt dɛn, mɛmbran switch ɛn in-mɔld dɛkɔreshɔn usay print grafik ɛn mɛkanikal ficha dɛn fɔ de kɔrɛkt wan rɛjista.

Risistɛns fɔ Ɔt

Polikabɔnɛt de gi ay tɛmal pefɔmɛns pas bɔku kɔmɔn pak plastic, we de mek i fayn fɔ sɔm sɛlɛkɛt ɔtomotiv, aplayans, ilɛktroniks ɛn industrial grafik aplikeshɔn dɛn we dɛn de ɛkspos to ɛlevɛt tɛmpracha.

Gud we yu kin print

Dɛn mek klia PC fim dɛn we dɛn dɔn pik fɔ grafik printin ɛn dɛn kin sɔpɔt kɔmpitabl sɔlvɛnt-bɛs, wata-bɛs, UV-kyuring ɛn ɔda ink sistem dɛn. Dɛn fɔ kɔnfyus di we aw dɛn de print bay we dɛn yuz di rayt we aw di fim de ɛn di we aw dɛn de mek di fim.

Ilɛktrik Insuleshɔn

Polikabɔnɛt kin gi yusful ilɛktrik insuleshɔn prɔpati, we de mek sɔm gred dɛn we dɛn dɔn pik fayn fɔ insul kɔmpɔnɛnt dɛn, bateri aplikeshɔn, ilɛktronik ɛn aplayans asɛmbli usay ilɛktrik pefɔmɛns nid fɔ de.

Aplikeshɔn fɔ Klia Polikabɔnɛt Film

Grafik Ɔvlayz dɛn

Dɛn kin yuz klia polycarbonate film bɔku bɔku wan as di bays matirial fɔ print grafik ɔvlay pan industrial mashin, aplayans, kɔntrol ikwipmɛnt ɛn ilɛktronik prodak. Dɛn kin print grafik dɛn bak fɔ ɛp fɔ protɛkt ink ɔnda di transparent fim.

Membran Switch dɛn

Polycarbonate film de gi wan kɔmbaynshɔn fɔ printin kɔmpatibiliti, dimɛnshɔnal stebiliti, tafnɛs ɛn ɛmbos kapabiliti fɔ mɛmbran-switch ɔvlay, kipad ɛn mɔtalman-mashin intafɛs.

Instrumɛnt Panɛl ɛn Kɔntrol Panɛl dɛn

Yu kin yuz transparent ɔ tɛkstɔr PC fim fɔ ɔtomotiv dashbɔd, aplayans panɛl, industrial kɔntrol panɛl ɛn ilɛktronik displei intafɛs usay dɛn nid fɔ print grafik ɛn fɔ lɔng tɛm.

Nemplet ɛn Indastrial Lɛbul dɛn

PC film kin print ɛn day kɔt insay nem plet dɛn we go de te, wɔnin lɛbl dɛn, ikwipmɛnt lɛbl dɛn ɛn branded industrial grafik dɛn.

In-Mold Dɛkɔreshɔn ɛn In-Mold Ilɛktronik

Suitabl klia PC film kin print, fɔm ɛn intagret insay mold kɔmpɔnɛnt fɔ aplayans panɛl, ɔtomotiv intɛriɔ, kɔshɔma ilɛktroniks ɛn dɛkɔretiv kɔmpɔnɛnt dɛn. Prɛsis dimɛnshɔnal stebiliti impɔtant mɔ fɔ print-to-fɔm rɛjista.

Ilɛktronik Displei dɛn

Yu kin yuz klia PC fim dɛn na sɔm displei winda dɛn, protɛktiv ɔvlay dɛn, kɔmyunikeshɔn divays dɛn ɛn ilɛktronik intafɛs dɛn. Projɛkt dɛn we nid fɔ rili lɔw haz ɔ tayt kɔntrol optik pefɔmɛns fɔ yuz wan dediket optik-grɛd PC fim.

ID Kad ɛn Sikyuriti Kad dɛn

Tin polycarbonate films kin yuz as kad layers, ovalay ɛn printabl sabstret in sɛlɛkɛt aydentifikeshɔn ɛn sikyɔriti-kad kɔnstrɔkshɔn.

Ilektrikal Insuleshɔn Kɔmpɔnɛnt dɛn

Dɛn kin kɔt di PC film gred dɛn we dɛn dɔn pik insay insulin barɛri, spɛshal ɛn protɛktiv kɔmpɔnɛnt fɔ batri, ilɛktrik ikwipmɛnt ɛn ilɛktronik asɛmbli.

Klia PC Film vs Sɔlid Polikabɔnɛt Shit

Klia polycarbonate film ɛn solid polycarbonate sheet de yuz di sem polima famili bɔt nɔmal wan de sav difrɛn aplikeshɔn dɛn.

Fɔ ruf, skaylayt, big glazing panɛl ɛn strɔkchɔral sefty gad, di wan dɛn we de bay fɔ nɔmal fɔ rivyu HSQY in sɔlid polikabɔnɛt shit rɛnj pas dis tin-film kategori.

Standart Klia Film vs Optik-Gred PC Film

If yu projɛkt gɛt difayn haz, optik distɔshɔn, birefringɛns, layt-transmishɔn ɔ displei rikwaymɛnt, spɛsifa dɛn valyu dɛn de na yu RFQ ɛn aks fɔ optik-grɛd matirial pas fɔ abop pan di wɔd 'klia.' nɔmɔ.

Klir PC Film Surface Finishes fɔ di wan dɛn we de dɔn

Printin pan Klia Polikabɔnɛt Film

Printing pefɔmans na wan pan di men rizin dɛn we mek dɛn de yuz polycarbonate film bɔku bɔku wan fɔ ɔvlay ɛn industrial grafik.

Dipen pan di fim gred ɛn di say we di fim de, di we dɛn fɔ print we go gri wit am kin bi:

• Fɔ print na skrin

• UV printin we dɛn de print

• Ɔfset printin pan gred dɛn we fit

• Solvent-based ink sistem dɛn we dɛn kin yuz

• Wata-based ink sistem pan kɔmpitabl sɔfays

• Rivas ɔ sɛkɔn-sɔfas printin

• Grafik printin we gɛt bɔku layers

• Dijital-printin sistem dɛn we dɛn dɔn pik

Rivas printin kin yusful fɔ grafik ɔvlay bikɔs di ink we dɛn print de biɛn di transparent PC layt, we kin ɛp fɔ protɛkt grafik frɔm dairekt abrashɔn we dɛn de yuz am.

Ɔltɛm tɛst ink adheshon, drying ɔ curing, kala riprodakshɔn, layt rɛjista ɛn post-fɔm pefɔmɛns wit di aktual PC film gred bifo yu apruv kɔmɛshɔnal prodakshɔn.

Day Kɔt, Ɛmbos ɛn Fɔm

Klia polikabɔnɛt fim de sɔpɔt bɔku sɛkɔndari kɔnvɔshɔn prɔses dɛn we di industrial grafik ɛn ilɛktroniks manifakta dɛn de yuz.

• Day Cutting: Dɛn kin yuz am fɔ mek ɔvlay profayl, winda, lɛbl, ol ɛn prɛsishɔn kɔmpɔnɛnt dɛn.

• Panching: I fayn fɔ mawnt ol ɛn kɔmpɔnɛnt ficha dɛn.

• Embossing: Dɛn kin yuz am fɔ mek taktil ki, dome, rayz simbul ɛn dɛkɔretiv ifɛkt.

• Tɛmofɔmin: Dɛn kin ɔt di gred dɛn we dɛn dɔn pik ɛn fɔm dɛn to tri-dimɛnshɔnal kɔmpɔnɛnt dɛn.

• Hydroforming: Dɛn kin yuz am wit fayn gred fɔ ditayla fɔm grafik kɔmpɔnɛnt dɛn.

• Bɛnd: Dɛn kin mek tin fim akɔdin to di tik we di matirial tik ɛn di rayus we dɛn mek.

• Lamination: PC film kin inkorpor insay multi-layer strɔkchɔ fɔ sɔm aplikeshɔn dɛn.

Polikarbonɛt Film fɔ Mɛmbran Swit

Wan mɛmbran switch ɔvlay fɔ kɔba vijual grafik wit ripit mɛkanikal pefɔmɛns. Dɛn kin pik polycarbonate film bɔku tɛm bikɔs i kin sɔpɔt printin, ɛmbos, day kɔt ɛn ripit yuz intarakshɔn.

Di wan dɛn we de bay fɔ difayn:

• Tik we di film tik

• Glos, mat ɔ tɛkstɔr sɔfays

• Transparency ɔ displei winda dɛn we dɛn nid

• Sistem fɔ print

• Ɛmbos-ki jɔyometri

• Die-cut tolɛreshɔn we dɛn kin du

• Di tɛmpracha we dɛn de yuz fɔ wok

• Kεmikכl-klin εkspכzכn

• Rikwayd abrashɔn ɔ skrach rɛsistɛns

• Flame rating we dɛn nid if i apɔynt

Standard, UV, Flame-Retardant ɛn Had-Kɔt PC Film

Nɔto ɔl transparent polycarbonate film gɛt di sem funkshɔnal pefɔmɛns. Fɔ pik di kɔrɛkt gred impɔtant mɔ fɔ ɔda, ilɛktrik ɛn ay-tɔch aplikeshɔn dɛn.

Klia Polikabɔnɛt Film vs PET Film

Kwaliti Kɔntrol fɔ Klia Polikabɔnɛt Film

B2B bayer dɛn fɔ difayn mɛzhɔbal akseptans krayteria, mɔ we dɛn de yuz PC film fɔ print, ɔvlay ɔ prɛsishɔn day-kat kɔmpɔnɛnt dɛn.

Aw fɔ Pik di Rayt Klia Polikabɔnɛt Fim

1. Difayn di aplikeshɔn: Grafik ɔvlay, mɛmbran switch, inschrumɛnt panɛl, displei, lɛbl, insuleshɔn ɔ IMD kɔmpɔnɛnt.

2. Selekt tik: Spɛsifik di kɔrɛnt gej ɔ di stiffnɛs ɛn fɔm bihayvya we dɛn nid.

3. Difayn optik rikwaymɛnt: Layt transmishɔn, haz ɛn optik distɔshɔn usay i rili impɔtant.

4. Pik sɔfays finish: Polish, glos, fayn mat, mat ɔ tɛkstɔr.

5. Kɔnfɛm di we aw dɛn de print: Gi di ink sistem ɛn di we aw dɛn de mɛn am.

6. Kɔnfɛm sɛkɔndari prɔsesin: Day kɔt, ɛmbos, tɛmfɔmin, bɛnd ɔ laminɛshɔn.

7. Spesify di opareshɔn envayrɔmɛnt: Tɛmpratura, humidity, kemikal, klin ɛjɛn ɛn fɔ de na do.

8. Difayn di tin dɛn we yu nid fɔ du: UV rɛsistɛns, flaym rɛytin, had kɔtin, ilɛktrik insuleshɔn ɔ optik gred.

9. Spɛsifik di rol dimɛnshɔn: Waid, kɔr, rol dayamita ɛn rol wet usay dɛn de yuz rol-fed prɔsesin.

10. Rɔn wan prodakshɔn trayal: Test printin, fɔm, day kɔt ɛn finish-pat pefɔmɛns bifo bɔku aprɔval.

Kastom Klia Polikabɔnɛt Film Opshɔn dɛn

Pakɛj ɛn Ɛkspɔt Sapɔt

Klia PC film nid fɔ klin hanlin bikɔs skrat, dɔst ɛn rol damej kin afɛkt printin ɛn di las apinɛns.

• Protektiv film fɔ sɔm sɔfays dɛn we dɛn dɔn pik

• PE we dɛn de rap

• Kraft-pepa protɛkshɔn

• Rol ɔ sheet pak

• Slit rol dɛn we dɛn kɔstɔmayt

• Edj ɛn kɔna protɛkshɔn

• Palletized ɛkspɔt pak

• Weyt we dɛn mek fɔ rol we dɛn kɔstɔmayz

• Batch ɛn rol aydentifikeshɔn

Wetin Mek Yu Pik HSQY as Yu Klia Polikabɔnɛt Fim Splaya?

• Bɔku PC Film Gred dɛn: Klia, optik, flame-ritardant, UV-resistant, had-kɔt, layt-difyuz ɛn tint opshɔn dɛn.

• Kastɔm ​​Tiknɛs: Bɔku tin-film gej dɛn fɔ print ɛn fɔ chenj di industri.

• Kastɔm ​​Waid: Dɛn kin mek di rɔl wit ɛn di slit rol dɛn mach wit di ikwipmɛnt dɛn we di kɔstɔma dɛn gɛt.

• Bɔku Surface Finishes: Glos, polish, mat, fayn mat ɛn tɛkstɔr opshɔn dɛn.

• Printin Aplikeshɔn: Fayn gred fɔ grafik ɔvlay, lɛbl, kad ɛn industrial panɛl.

• Sɛkɔndari Prɔsesin: Dɛn kin ebul fɔ evaluate di day kɔt, ɛmbos, fɔm, bɛnd ɛn lamination.

• Teknikal Data Sɔpɔt: HSQY de gi bɔku bɔku polikabɔnɛt fim data shit fɔ aplikeshɔn-spɛsifi k gred dɛn.

• B2B Export Supply: Sɔpɔt fɔ ilɛktroniks manifakta, printa, kɔnvɔta, ɔtomotiv saplay ɛn distribyushɔn.

Us Infɔmeshɔn Fɔ De Insay Yu RFQ?

1. Di aplikeshɔn we dɔn dɔn

2. PC film tik ɛn tolɛreshɔn

3. Rol wit ɔ sheet dimɛnshɔn dɛn

4. Klia ɔ transparent tint rikwaymɛnt

5. Glos, polish, fayn mat, mat ɔ tɛkstɔr sɔfays

6. Layt-transmishɔn we dɛn nid

7. Maksimal haz if i apɔynt

8. Di we aw dɛn de print ɛn di we aw dɛn de yuz ink

9. Day kɔt, ɛmbos ɔ fɔm prɔses

10. Di tɛmpracha we dɛn de yuz fɔ wok

11. Kεmikכl כ klin-ejen we de kכmכt

12. UV resistans if nid de

13. Flame rating if nid de

14. Had-kot ɔ skrach-rɛsistɛns rikwaymɛnt

15. Trial kwantiti

16. Diman fɔ ɛvri mɔnt ɔ ɛvri ia

17. Di kɔntri ɔ pɔt usay dɛn de go

18. Di tin dɛn we dɛn nid fɔ pak

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt Klia Polikabɔnɛt Fim

Wetin dɛn kin yuz klia polycarbonate film fɔ?

Dɛn kin yuz klia polycarbonate film fɔ grafik ɔvlay, mɛmbran switch, industrial lɛbl, nem plet, inschrumɛnt panɛl, aplayans kɔntrol, ilɛktronik displei, aydentifikeshɔn kad, in-mold dɛkɔreshɔn ɛn ilɛktrik insuleshɔn kɔmpɔnɛnt dɛn.

Us tiknes fɔ klia PC film de?

Di HSQY klia PC film prodakt dɛn we de naw inklud lɛk 0.125, 0.20, 0.25, 0.375, 0.50, 0.80 ɛn 1.00 mm. Dɛn kin tɔk bɔt ɔda spɛsifikɛshɔn dɛn dipen pan di gred ɛn ɔda tin dɛn we dɛn nid.

Aw transparent na klia polycarbonate film?

Suitabl transparent polycarbonate film dεm kin gi aprכksimatli 89%–92% layt transmishכn. Aktual valyu dεm dipכnt pan tik, rεsin grεd εn sכfayz tεkschur. Optik aplikeshɔn dɛn fɔ spɛsifa bak haz ɛn ɔda optik krayteria dɛn.

Yu tink se klia PC fim na di sem wit optik-grɛd PC fim?

Nɔto fɔ se na so i bi. Standard klia film de gi jenɛral transparency, we optik-grɛd film de dizayn fɔ aplikeshɔn dɛn we nid mɔ tayt kɔntrol haz, layt transmishɔn, surface kwaliti ɛn optik distɔrshɔn.

Yu tink se dɛn kin print polikabɔnɛt fim?

Yɛs. Suitabl gred dɛn de sɔpɔt skrin printin ɛn ɔda kɔmpitabl solvent-based, wata-based, UV ɔ IR-cured printin sistem dɛn. Dɛn fɔ tɛst di ink adheshon pan di film ɛn di say we dɛn dɔn pik bifo dɛn mek am mas.

Yu tink se dɛn kin print PC fim rivas?

Yɛs. Rivas ɔ sɛkɔn-sɔfas printin na tin we dɛn kin yuz fɔ grafik ɔvlay bikɔs di transparent PC layt kin protɛkt di pikchɔ we dɛn print frɔm dairekt kɔntakt ɛn abrashɔn.

Yu tink se dɛn kin day kɔt klia PC fim?

Yɛs. Polikabɔnɛt fim de kɔnvɔyt bɔku bɔku wan bay we dɛn de kɔt ɛn panch fɔ ɔvlay, lɛbl, swich ɛn prɛsishɔn kɔmpɔnɛnt dɛn. Tul dizayn fɔ bi ɔptimayz fɔ di tik we dɛn dɔn pik fɔ di fim.

Yu tink se dɛn kin ɛmbos polikabɔnɛt fim?

Yɛs. Suitabl PC film kin embos fɔ prodyuz taktil ki, swich dome, rayz simbul ɛn dɛkɔretiv ficha fɔ mɛmbran switch ɛn kɔntrol-panɛl aplikeshɔn.

Yu tink se dɛn kin mek klia polikabɔnɛt fim we dɛn kɔl thermoformed?

Yɛs. Suitabl gred dɛn kin thermoformed fɔ IMD, ɔtomotiv, aplayans ɛn ilɛktronik kɔmpɔnɛnt dɛn. Fɔm tɛmpracha ɛn dimɛnshɔnal kɔmpɛnshɔn fɔ validet yuz di aktual pat dizayn ɛn fim gred.

Ɔl di klia polycarbonate film UV resistant?

Nɔ. UV pefɔmɛns dipen pan di rɛsin fɔmyulashɔn, stebyulayza ɔ protɛktiv kɔtin. UV aplikeshɔn dɛn we de na do ɔ fɔ lɔng tɛm fɔ spɛsifa wan dediket UV-rɛsistant PC fim gred.

Ɔl di polikabɔnɛt fim dɛn nɔ de mek faya?

Nɔ, di we aw di flame de wok kin difrɛn bay di gred ɛn di tik we i tik. Projek we nid UL94 V-0, V-2 ɔ ɔda difayn klasifikeshɔn fɔ yuz wan dediket flaym-ritardant PC film ɛn kɔnfɔm di raytin na di tik we dɛn spɛsifa.

Is standad klia PC film skratch resistant?

Polikabɔnɛt de gi gud taf bɔt wan say we nɔ gɛt kɔt kin stil skrach. Aplikeshɔn dɛn we nid fɔ gɛt ay abrashɔn, skrach ɔ kemikal rɛsistɛns fɔ yuz wan aprɔpriet had-kɔt polycarbonate film.

Us surface finish dɛn de we dɛn kin gɛt?

Di opshɔn dɛn na polish, ay-glos, fayn mat, mat, velvet/tɛkstɔr ɛn sɛlɛkshɔn had-kɔt sɔfays. Difrɛn kɔmbaynshɔn dɛn kin de na di tu say dɛn dipen pan di prɔdak gred.

PC film fit fo membran switch?

Yɛs. Polycarbonate film na wan we dɛn de yuz bɔku bɔku wan fɔ membran-switch ɔvlay bikɔs i de kɔba printin kapasiti, tafnɛs, dimɛnshɔnal stebiliti, ɛmbos pefɔmɛns ɛn bɔku sɔfays finish.

Yu tink se polycarbonate film fayn fɔ yuz na do?

Fɔ yuz am na do, yu nid fɔ gɛt fayn gred we nɔ de yuz UV ɛn di wɛda. Standard klia PC film nɔ fɔ ɔtomɛtik diskrayb as lɔng tɛm wɛdapruf we nɔ gɛt difayn UV stebilizayshɔn sistɛm ɛn wɛda rikwaymɛnt.

HSQY kin saplae PC film in rol?

Yɛs. HSQY de saplae PC film insay rol ɛn bak sheet ɛn kɔstɔmayz slit rol. Rol wit, tik, kor ɛn pak kɔnfigyushɔn kin tɔk bɔt akɔdin to di kɔstɔma in kɔnvɔtin ikwipmɛnt.

HSQY kin gi sampul bifo bulk prodakshɔn?

Dɛn kin tɔk bɔt sampul ɛvalueshɔn. Baya dɛn fɔ tɛst optik apinans, printin, day kɔt, ɛmbos, fɔm ɛn finish-pat pefɔmɛns bifo dɛn gri fɔ kɔmɛshɔnal prodakshɔn.

Us infɔmeshɔn a fɔ gi fɔ kot?

Duya gi di aplikeshɔn, tik, rol wit ɔ shit saiz, optik rikwaymɛnt, sɔfays finish, printin prɔses, fɔm ɔ day-kat we, ɔpreshɔn tɛmpracha, UV ɔ flame-rɛytin rikwaymɛnt, had-kot rikwaymɛnt, kwantiti ɛn dɛstineshɔn kɔntri.

Rikwest Klia Polikabɔnɛt Film Sampul ɛn Prayz

HSQY de saplae klia PC film to membran-switch manifakta, grafik-ɔvlay kɔnvɔta, printa, ilɛktronik manifakta, ɔtomotiv saplay, aplayans manifakta, lɛbl kɔnvɔta ɛn industrial distribyushɔn.

If yu nid polish klia PC film fɔ print, mat film fɔ kɔntrol panɛl, tɛkstɔr film fɔ grafik ɔvlay ɔ wan aplikeshɔn-spɛsifi k UV, FR, optik ɔ had-kɔt gred, HSQY kin rivyu yu tɛknikal rikwaymɛnt dɛn.

Send yu drɔin, fim spɛsifikɛshɔn we de naw ɔ aplikeshɔn rikwaymɛnt fɔ aks fɔ tɛknikal data, sampul infɔmeshɔn ɛn faktri prayz.