PVC Fri Fom Bod Manufacturer fɔ Print, Sayn ɛn Displei
HSQY PLASTIC de mek ɛn saplae PVC fri fom bod fɔ dijital printin, skrin printin, sayn, pɔynt-ɔf-pɔch displei, ɛgzibishin grafik, foto mawntin, fɔ mek mɔdel, intɛriɔ dɛkɔreshɔn ɛn jenɛral plastic fabrikeshɔn.
PVC fri fom bod na laytwɛt ɛkspanda PVC shit we dɛn prodyuz yuz fri-fom ɛkstrushɔn prɔses. I fayn sɛlul strɔkchɔ de ridyus di bod wet we i de gi wan smol sɔfays we fayn fɔ print, kɔt, rout, drɔ, laminate ɛn fabrication.
Impɔtant: di wɔd ' PVC fri fom bod' nɔ min se di bod na PVC -fri. 'Fri fom' de diskraib di fom prɔses. Di matirial insɛf na fom polivinyl klorayd, ɔ PVC .
HSQY in kɔrɛnt PVC fom bod prodak famili kɔba lɛk 1–35 mm tiknes , bɔku density gred, standad 4 × 8 ft / 1220 × 2440 mm shit ɛn big shit fɔmat. Wait na di kɔlɔ we dɛn kin yuz mɔ fɔ print, ɛn wi kin tɔk bɔt blak, rɛd, yɔlɔ, blu, grɛn ɛn kɔstɔmayt kɔlɔ dɛn bak.
Wetin Na PVC Fri Fom Bɔd?
PVC fri fom bod na rigid εkspεnd polyvinyl klorayd shit we dεn mek bay we dεn alaw di PVC kכmpawnd fכ εkspεnd fri wan we dεn de εkstrushכn bifo di shit kol εn kalibrayt.
di prכsεs de mek wan layt we di sεl kכr εn wan sכft sכfa. We yu kɔmpia am wit sɔlid rigid PVC shit, fri-fom PVC de yuz fom intanɛnt strɔkchɔ fɔ ridyus di density ɛn wet we i de kip yusful rigiditi ɛn fabrikeshɔn pefɔmɛns.
Dɛn kin kɔl di matirial bak as ɛkspanda PVC shit, PVC fom shit, fom PVC bod, PVC sayn bɔd ɔ fri-fom PVC shit.
Yu tink se ' PVC Fri Fom Bɔd' Min PVC -Fri?
Nɔ, dis na impɔtant difrɛns pan wɔd dɛn.
| di wɔd |
Di minin fɔ |
| PVC Fri Fom Bod |
PVC bod we dɛn mek yuz fri-fom ɛkstrushɔn prɔses |
| Fri-Fɔm PVC Shit |
כda we fכ dεskrεb di sem fri-fכm PVC mεtirial famili |
| PVC -Fri Bɔd |
Wan bod we dɛn mek spɛshal wan we nɔ gɛt polivinyl klorayd; dis na difrɛn matirial kategori |
If yu projɛkt spɛshal wan nid fɔ gɛt klorin-fri ɔ nɔ- PVC sabstret, tɔk da rikwaymɛnt de sɛpret we yu de aks fɔ matirial.
PVC Fri Foam Bod Spɛsifikeshɔn dɛn
| Sɔntin |
PVC Fri Fom Bod / Ekspand PVC Shit |
| Tin dɛn |
Rigid polivinyl klorayd we dɛn dɔn ɛkspɛn |
| Tiknɛs we di Prodak-Famili gɛt naw |
lεk 1–35 mm dipכnt pan di grεd εn di aplikεshכn |
| Tiknɛs dɛn we Kɔmɔn Ficha |
3 mm, 5 mm, 12 mm, 15 mm ɛn 18 mm na kɔmɔn tin insay di HSQY PVC fom bɔd rɛnj |
| Densiti Rɛnj |
aprכksimatli 0.35–1.0 g/cm3 akraos di kכrant linked PVC fכm bכd prodakt famili; konfam fri-fom gred bay spesifikeshɔn |
| Standart Shit Sayz |
1220 × 2440 mm / lɛk 4 × 8 ft |
| Ɔda Sayz dɛn we de naw |
915 × 1830 mm, 1560 × 3050 mm ɛn 2050 × 3050 mm |
| Kastom Sayz |
Kastom wit, lɔng ɛn kɔt dimɛnshɔn dɛn we de ɔnda prodakshɔn fisibiliti |
| Standart Kɔlɔ |
Wayt |
| Kastom Kɔlɔ dɛn |
Blak, rɛd, yɔlɔ, blu, grɛn ɛn kɔstɔm kɔlɔ dɛn we de ɔnda gred ɛn ɔda spɛsifikɛshɔn |
| Sho |
Smɔl, mat, satin ɔ aplikeshɔn-spɛsifi k finish akɔdin to gred |
| Di we aw dɛn de du di wok |
Dijital printin, skrin printin, kɔt, CNC routin, drɔlin, panch, day kɔt, sanding, peint, laminating ɛn bonding |
| Men Aplikeshɔn dɛn |
Sayn, POP displei, ɛgzibishin bod, foto mawntin, mɔdel mek, printin, dɛkɔreshɔn ɛn jenɛral fabrikeshɔn |
PVC Fri Fom Bod Density: Wetin Baya dɛn fɔ Spɛsifik?
Densiti na wan pan di impɔtant pɔyzin paramita fɔ ɛkspanda PVC bɔd.
Tu PVC fom bod we gɛt di sem dimɛnshɔn ɛn tik kin gɛt difrɛn wet, stiffness, mashin bihayvya ɛn surface pefɔmans if dɛn density difrɛn.
| Density Direction |
Jɛnɛral Sɛlɛkshɔn Kɔnsidɛreshɔn |
| Fɔm Bɔd we gɛt Lɔwa-Dɛns |
Lower bod weight ɛn izi fɔ handle; bɔku tɛm dɛn kin tink bɔt am fɔ print ɛn displei dɛn we nɔ at fɔ si |
| Midul-Densiti Fom Bod |
Balans ɔf wet, rigiditi, sɔfayz kwaliti ɛn fabrikeshɔn pefɔmɛns |
| Fɔm Bɔd we gɛt ay-Dɛnsi |
Greater weight en potentially improved rigidity, mashin stebiliti en fastener pefomans dipen pan di gred |
Insted fɔ aks fɔ ɔl '5 mm PVC fom bod,' kɔmɛshɔnal bayer dɛn fɔ fayn fɔ spɛsifa tik, dɛnsiti, shit wet ɔ target aplikeshɔn.
PVC Fri Fom Bod fɔ Dijital Printin
Print ɛn sayn na men aplikeshɔn fɔ PVC fri fom shit bikɔs wan fayn gred de gi flat, smol sɔfays we dɛn jɔyn wit lɔw bod wet.
Wait PVC fom bod na tin we dɛn kin pik fɔ dairekt dijital grafik bikɔs di layt bakgrɔn de sɔpɔt ay-kɔntrast print imej dɛn.
Di wan dɛn we de bay printin fɔ gi di kayn printa, di ink sistem, di tik we di bɔd tik, di say we dɛn dɔn fɔ print ɛn if dɛn nid fɔ print wan sayd ɔ tu sayd.
Krio grafik projɛkt dɛn fɔ gri fɔ wan prodakshɔn sampul we de yuz di aktual printa ɛn ink bifo big ɔda.
PVC Fom Bod fɔ Skrin Printin
PVC fri fom shit kin yuz bak as skrin-printin sabstret fɔ sayn, advatayzmɛnt panɛl, dairekshɔn grafik ɛn prɔmoshɔnal bod.
Ink adheshon, drying kondishon en kemikal kompitibiliti shud test wit di selekt surface en ink system.
PVC Fri Fom Bod fɔ Sayn ɛn Advatayzmɛnt
Kɔmɔn sayn aplikeshɔn dɛn na rital sayn, mɛnyu bɔd, prɔmoshɔnal panɛl, rial-ɛstate sayn, ɛgzibishin grafik, dairekshɔn sayn, tred-sho displei ɛn pɔynt-ɔf-sɛl matirial.
Dɛn fɔ pik di tik we di bɔd tik akɔdin to di sayn dimɛnshɔn we dɛn dɔn dɔn, di we aw dɛn de mawnt am, di rigiditi we dɛn de ɛkspɛkt, di briz we de kɔmɔt na di sayn ɛn if di sayn gɛt freym ɔ i nɔ gɛt sɔpɔt.
PVC Fri Fom Bod fɔ POP ɛn Ɛgzibishin Displei
Laytwɛt PVC fri fom bod yusful fɔ tɛmporari ɛn sɛmi-pɔrmanent rital displei bikɔs i kin jɔyn dairekt printin wit mɛkanikal fabrikeshɔn.
I kin kɔt am insay kɔstɔm shep fɔ kɔnta displei, ɛgzibishin grafik, hεda bod, prodak-displei panɛl, dimɛnshɔnal lɛta ɛn prɔmoshɔnal instɔleshɔn.
PVC Fri Fom Bod fɔ Fɔto Maunt ɛn Mɔdel Mek
Di kɔmbaynshɔn fɔ lɔw wet, rigiditi ɛn izi kɔt de mek PVC fri fom shit yusful fɔ foto mawnt, akitekchral mɔdel, protɔtayp, mɔk-ap ɛn prɛzɛntɛnshɔn bɔd.
Adhesive kompitibiliti fɔ chɛk bifo yu mawnt valyu grafik bikɔs bonding pefɔmɛns dipen pan di adhesive kemistri ɛn bod surface.
PVC Fri Fom Bod vs. PVC Celuka Fom Bod
| Ficha |
PVC Fri Fom Bod |
PVC Celuka Fom Bod |
| We |
Fri-foaming ɛkstrushɔn |
Celuka ekstrushɔn prɔses |
| Karakta we de na di surface |
Smɔl sɔfays wit laytwɛt fayn-sɛl strɔkchɔ |
Hada krεst כta skin we de rawnd wan fכm kכr |
| Tipik Strɔng |
Optimized fɔ laytwɛt printin ɛn displei aplikeshɔn dɛn |
Bɔku tɛm dɛn kin pik am we big sɔfayz hadnɛs ɛn fabrication rigidity na prayorities |
| Tipik Aplikeshɔn dɛn |
Printin, sayn, ɛgzibishin ɛn POP displei |
Kabinɛt, fɔnicha, patishɔn ɛn komponent dɛn we dɛn mek we ebi pasmak |
Fɔ di fɔnicha we gɛt had skin ɛn fɔ mek gred dɛn we dɛn mek, rivyu wi PVC Celuka Fom Bod dɛn.
PVC Fri Fom Bod vs. PVC Ko-Ekstrushon Fom Bod
| Ficha |
Fri Fom |
Ko-Ekstrud Fom Bod |
| Bildin |
Fכm PVC strכkchכ we fכm tru fri εkspεns |
Foamed kor wit ko-extruded denser surface layers |
| Di Prioriti fɔ di Surface |
Printin ɛn jenɛral fabrication |
Higher surface hardness, apinans ɛn dimand fabrication |
| Kɔmɔn fɔ Yuz |
Sayn ɛn displei dɛn |
Fɛnichɔ, kabinɛt, prɛmiɔm displei ɛn dɛkɔretiv aplikeshɔn dɛn |
Fɔ multi-layer foam panels wit denser skin, rivyu wi PVC Ko-Ekstrushɔn Fom Bɔd dɛn.
PVC Fri Fom Bod vs. Laminated PVC Fom Bod
Standart fri-fom PVC bod de yuz di exposed PVC fom surface as di finished fes. Wan laminated PVC fom bod de ad dekorativ ɔ protɛktiv sɔfays matirial dɛn oba di fom-bɔd sabstret.
Laminated bod dɛn kin tink bɔt usay fɔnicha, kabinɛt ɔ intɛriɔ dɛkɔreshɔn nid wud gren, mabul apinans, dɛkɔretiv fim ɔ ɔda finish surface.
Fɔ dekɔretiv finish panɛl dɛn, rivyu wi PVC Laminated Fom Bod dɛn.
PVC Fri Fom Bod vs. Sɔlid PVC Shit
| Ficha |
PVC Fri Fom Bɔd |
Sɔlid Rigid PVC Shit |
| Intanɛnt Strukchɔ |
Cellular / we gɛt fom |
Sɔlid nɔ-fom strɔkchɔ |
| Tik |
Lɔwa bikɔs ɔf di fom strɔkchɔ |
I pas am pas dat |
| Di men tin we yu fɔ pik fɔ du |
Laytwɛt bod, printin ɛn displei fabrication |
Solid strɔkchɔ ɛn aplikeshɔn-spɛsifi k rigid PVC pefɔmɛns |
PVC Fri Fom Bod vs. PP Kɔrɔgɛt Shit
| Ficha |
PVC Fri Fom Bɔd |
PP Kɔrɛg Shit |
| Bildin |
Fayn selula fom bod |
Sheet we gɛt ol we gɛt flut |
| Sho |
Smol ɛn fayn fɔ prɛmiɔm grafik aplikeshɔn dɛn |
Fluted strɔkchɔ kin mek difrɛn surface apinɛns |
| Rigiditi we pɔsin kin gɛt |
Rigid bod we gɛt fɔ du wit am |
Layt wet sheet wit difrɛn bɛnd ɛn fold bihayvya |
| Di Tipik Yuz |
Sayn dɛn, POP displei dɛn, ɛgzibishin dɛn ɛn panɛl dɛn we dɛn print |
Pakɛj, tɛmporari protɛkshɔn, bɔks ɛn ikɔnomik tɛmporari sayn |
Aw fɔ Pik PVC Fom Bɔd Tiknɛs Tiknɛs
| Dairekshɔn |
Tipik Sɛlɛkshɔn Dairekshɔn |
| 1–3 mm |
Laytwɛt grafik, mawntin, smɔl sayn ɛn tin displei kɔmpɔnɛnt dɛn |
| 3–5 mm |
Jɛnɛral sayn dɛn, ɛgzibishin panɛl dɛn, displei dɛn ɛn bod dɛn we dɛn print |
| 5–10 mm |
Big displei, dimɛnshɔnal grafik, fabricated panɛl ɛn aplikeshɔn dɛn we nid mɔ rigiditi |
| 12–18 mm |
Komponent dɛn we dɛn mek we ebi, pat dɛn we gɛt fɔ du wit fɔnicha ɛn panɛl dɛn usay dɛn nid fɔ tik mɔ |
| Abov 18 mm |
Projek-spɛsifi k fabrication; kכnfכm if fri fכm, Cεluka כ כda PVC fכm kכnstrכkshכn de mכr aprכpriet |
Tiknɛs nɔmɔ nɔ de sho di rigiditi. Dɛn fɔ tink bak bɔt di bod dimɛnshɔn, di density, di fom strɔkchɔ, di sɔpɔt spɛshal ɛn di kɔndishɔn fɔ di mawntin.
4 × 8 PVC Fri Fom Bod
1220 × 2440 mm , we dɛn kin kɔl lɛk 4 × 8 ft , na wan pan di standad PVC fom bod fɔmat dɛn insay di HSQY rɛnj.
Dis fɔmat de kɔmpit bɔku bɔku wan wit printin, CNC routin, sayn ɛn shit-fabrikeshɔn wokflɔ.
Big sheet fɔmat lɛk 1560 × 3050 mm ɛn 2050 × 3050 mm kin ridyus jɔyn dɛn bak ɛn impruv matirial yield insay ɔvasayz grafik ɔ fabricated panɛl.
Wait PVC Fri Fom Bod
Wait na di mɔs kɔmɔn PVC fri fom bod kɔlɔ fɔ print, sayn ɛn displei aplikeshɔn.
Di wan dɛn we de bay kɔmɛshɔnal printin fɔ tink bɔt di wayt, di sɔfa kɔnsistɛns, flat, dens, tik tolɛreshɔn ɛn ink kɔmpatibiliti pas di kɔlɔ nɔmɔ.
Kɔlɔ PVC Fri Fom Bɔd
Blak, rɛd, yɔlɔ, blu, grɛn ɛn kɔstɔmayt kɔlɔ dɛn kin tink bɔt fɔ displei, dimɛnshɔnal lɛta, dɛkɔretiv panɛl ɛn branded aplikeshɔn.
Di kɔlɔ we de kin dipen pan di tik we di bɔd tik, di density, di kwantiti we dɛn mek ɛn di say we dɛn nid fɔ dɔn di sɔfa.
Katin ɛn CNC Routin PVC Fri Fom Bɔd
PVC fom sheet kin mek yu yuz saw, CNC routers, drills ɛn ɔda fayn plastic ɔ wud wok ikwipmɛnt.
Di kɔmɔn fabrikeshɔn ɔpreshɔn dɛn inklud:
Saw we dɛn de kɔt
CNC routin we yu de yuz
Fɔ drɔl
Fɔ panch
Die cutting fɔ di rayt gej dɛn
Fɔ mek tin dɛn we dɛn rayt
Sandin
Mekanikal we dɛn kin yuz fɔ fast
Bonding wit kompitibl adhesive sistem
Laminating we dɛn kin yuz
Yu tink se PVC Fri Fom Bɔd Bi Laser Kɔt?
Kɔnvɛnshɔnal lɛsa kɔt nɔ fɔ trit lɛk difɔlt fabrikeshɔn we fɔ PVC .
We yu ɔt PVC i kin mek yu gɛt kɔrosiv ɛn denja fum, ɛn dɛn smok ya kin pwɛl di layz ikwipmɛnt we nɔ fayn bak.
CNC routing, saw cutting ɔ ɔda apruv mɛkanikal we dɛn jɔs de yuz mɔ pas nɔmɔ dɛn dɔn mek spɛshal ikwipmɛnt ɛn ɛkstrakshɔn sistem dɛn spɛshal wan fɔ PVC prɔsesin.
Bonding ɛn Laminating PVC Fri Fɔm Shit
PVC fri fom bod kin bon ɔ laminate yuz kɔmpitabl adeziv, tep ɛn film.
Adhesive selekshɔn fɔ tink bɔt di bod surface, bonded material, temperechur, moisture, expected lod ɛn if di prodak go yuz insay os ɔ na do.
Test bond strength yuz prodakshɔn matirial bifo yu mek big laminated asɛmbli.
Moisture Resistance ɛn Yuz am na do
Ɛkspɛn PVC gɛt smɔl mɔstɔ absɔpshɔn ɛn i nɔ de biev lɛk pepabɔd we dɛn nɔ trit ɔ natura wud we i de pan humidity.
Bɔt dɛn fɔ ebul fɔ no if i fayn na do akɔdin to di rayt bod gred, kɔlɔ, UV ɛksplɔshɔn, tɛmpracha saykl, mawntin sistɛm, briz lod ɛn di tɛm we dɛn de op fɔ gɛt savis.
Nɔ tink se ɛvri PVC fom bod gred gɛt di sem lɔng tɛm UV ɔ ɛkstirian wɛda pefɔmɛns.
Faya Pɔfɔmɛnshɔn fɔ PVC Fom Bɔd
Faya bihayvya dipכnt pan di PVC fכmyuleshכn, dεnsiti, tiknes εn tεst mεtכd.
Nɔ aplay faya klasifikeshɔn frɔm wan PVC fom bod prodak ɔ tik to di ɔl kategori.
If wan rigyuleted projɛkt nid ASTM E84, EN 13501, UL 94, GB 8624 ɔ ɔda faya standad, gi di ɛksaktɔl tɛst ɛn klasification we dɛn nid so dat dɛn go kɔnfyus di aplikebul prodak dɔkyumentri.
PVC Fri Fom Bɔd nɔ de ambɔg di envayrɔmɛnt?
PVC fri fom bod nɔ fɔ makɛt as envayrɔmɛnt supiriɔs jɔs bikɔs di wɔd dɛn 'fri fom' de na in nem.
Di matirial stil gɛt PVC . Envayrɔmɛnt ɛvalueshɔn fɔ tink bɔt fɔmyulashɔn, aditiv, prodak layf, manufakchurin efyushɔn, riyuz, risaykul rod, lokal west infrastukchɔ ɛn di patikyula prɔjek rikwaymɛnt.
If di kɔstɔma nid fɔmyulashɔn we nɔ gɛt lid, risaykul kɔntinyu, RoHS, REACH ɔ ɔda envayrɔmɛnt rikwaymɛnt, spɛsifa di ɛksaktɔ standad ɛn kɔnfɔm dɔkyumentri fɔ di gred we yu dɔn pik.
Aw fɔ Pik di Rayt PVC Fri Fom Bɔd
1. Difayn di Aplikeshɔn
Spɛsifik dijital printin, skrin printin, sayn, ɛgzibishin displei, foto mawntin, mɔdel mek ɔ fabrikeshɔn.
2. Kɔnfɔm Fri Fom, Sɛluka ɔ Kɔ-Ɛkstrud Bɔd
Fri fom na tin we fayn mɔ fɔ print ɛn layt sayn dɛn, we dɛn kin tink bɔt Sɛluka ɛn kɔ-ɛkstrud kɔnstrɔkshɔn dɛn we dɛn nid fɔ mek tin dɛn we at ɔ fɔ mek dɛn we ebi.
3. Pik Tiknɛs
Spɛsifik di bod tik togɛda wit di panɛl dimɛnshɔn dɛn we dɔn dɔn ɛn di we aw dɛn de mawnt am.
4. Spɛsifik di Density
Densiti de afɛkt di bod wet, rigiditi ɛn fabrikeshɔn bihayvya, so i fɔ de insay ripit-ɔda spɛsifikɛshɔn dɛn.
5. Pik di Shit Sayz
Kɔmɔn HSQY saiz dɛn inklud 915 × 1830 mm, 1220 × 2440 mm, 1560 × 3050 mm ɛn 2050 × 3050 mm, wit kɔstɔm dimɛnshɔn dɛn we de ɔnda di prodakshɔn fisibiliti.
6. Pik di Kɔlɔ
Wait na standad fɔ bɔku printin aplikeshɔn dɛn. Spɛsifik blak, rɛd, yɔlɔ, blu, grɛn ɔ kɔstɔm kɔlɔ we nid de.
7. Difayn di Surface Rikwaymɛnt dɛn
Spɛsifik mat, smol, satin ɔ ɔda finish we dɛn nid ɛn if dɛn nid fɔ mek protɛktiv mask.
8. Difayn di we aw fɔ Print
Gi printa teknɔlɔji, ink tayp ɛn if di printin go bi wan sayd ɔ tu sayd.
9. Difayn Fabrikeshɔn Rikwaymɛnt dɛn
Spɛsifik kɔt, CNC routin, drɔlin, engravin, panch, laminɛshɔn, peint ɔ bonding.
10. Kɔnfɛm Yuz insay os ɔ na do
Ekstirian aplikeshɔn dɛn fɔ no UV ɛksplɔshɔn, tɛmpracha, mawntin kɔndishɔn ɛn di savis tɛm we dɛn nid.
11. Kɔnfɛm Faya ɔ Kɔmplians Rikwaymɛnt
Gi di ɛksaktɔl tɛst we dɛn nid ɔ di dɛstineshɔn-maket kɔmplians rikwaymɛnt pas fɔ tek am se wan sɛtifiket de aplay to ɛvri bɔd.
12. Apruv wan Prodakshɔn Sampul
Chek tik, dens, wet, wayt, surface, flat, printin en fabrication pefomans bifo yu apruv wan customized komershal oda.
Kastom PVC Fri Fom Bod Manufakchurin
HSQY de sɔpɔt kɔstɔmayz ɛkspanda PVC bod projɛkt fɔ sayn manifakta, printin kɔmni, ɛgzibishin kɔntrakta, displei manifakta, plastic distribyushɔn ɛn fabricatɔ.
Di tin dɛn we dɛn nid fɔ du fɔ di kɔstɔm kin inklud:
Tik we dɛn kin kɔstɔm
Kastom density we dɛn kin yuz
4 × 8 ft / 1220 × 2440 mm sheet dɛn
Big big fɔmat sheet dɛn
Dimɛnshɔn dɛn we dɛn kɔt di kɔstɔm
Wait PVC fom bod
Blak PVC fom bod
Rɛd, yɔlɔ, blu ɛn grɛn bod dɛn
Kastom kɔlɔ dɛn
Mat surface na di wɔl
Smɔl ɔ satin sɔfays
Protektiv masking fɔ sɔm aplikeshɔn dɛn we dɛn dɔn pik
Dijital-printin gred dɛn
Skrin-printin gred dɛn
CNC routin we yu de yuz
Kɔt-to-sayz prɔsesin
Drin ɛn engraving
Lamination rikwaymɛnt dɛn
Kastom ɛkspɔt pakej
Kwaliti Kontrol fɔ PVC Fri Fom Bɔd
Bod tiknes ɛn tiknɛs tolɛreshɔn
Wid ɛn lɔng tolɛreshɔn
Tik
Weyt we di sheet gɛt
Fom-sɛl kɔnsistɛns
Bod flatnɛs
Di surface we de smol smol
Wait-pɔynt ɔ kɔlɔ kɔnsistɛns usay dɛn spɛsifa
Difɛkt dɛn we de na di wɔl
Print pefɔmɛns usay dɛn nid am
CNC edj kwaliti usay dɛn nid am
Impekt ɔ mɛkanikal rikwaymɛnt usay dɛn spɛsifa
Wata absɔpshɔn usay dɛn spɛsifa
Faya tɛst usay dɛn nid am
Protektiv-film kɔndishɔn
Packaging ɛn palet kɔndishɔn
Pak ɛn Intanɛshɔnal Shipin
PVC fom bod dεm rili layt fכ dεn saiz, bכt big-fכmat panεl dεm nid aprכpriet surface εn edj protεkshכn we dεn de transpכt.
Yu kin tɔk bɔt pak we yu de yuz protɛktiv film, PE rap, katon, edj protɛkshɔn ɛn paletayz ɛkspɔt pak akɔdin to di bod dimɛnshɔn ɛn di sɔfayz rikwaymɛnt.
Bayer dɛn fɔ kɔmpia yuzable sheet yield ɛn kɔntena lod efyushɔn we dɛn de pik bitwin standad ɛn kɔstɔm bɔd dimɛnshɔn.
Wetin Mek Yu Pik HSQY fɔ PVC Fri Fom Bɔd dɛn?
Bɔku PVC Fom Tɛknɔlɔji dɛn: HSQY de saplae fri-fom, Celuka, kɔ-ɛkstrud ɛn laminɛt PVC fom bod prodak fɔ difrɛn printin, fɔnicha ɛn fabrikeshɔn rikwaymɛnt dɛn.
Bɔku Tiknɛs: Di kɔrɛnt linked PVC fom bɔd prodakt dɛn de kɔba lɛk 1–35 mm dipen pan di prodakt strɔkchɔ ɛn aplikeshɔn.
Density Selection: Dɛn kin tɔk bɔt laytwɛt, midul-density ɛn ay-density rikwaymɛnt dɛn akɔdin to di finish-prɔdak pefɔmɛns.
Standart ɛn Big Fɔmat: Di sayz dɛn we de naw na 915 × 1830 mm, 1220 × 2440 mm, 1560 × 3050 mm ɛn 2050 × 3050 mm.
Printin Aplikeshɔn dɛn: Yu kin pik fri-fom PVC fɔ dijital printin, skrin printin, sayn ɛn displei aplikeshɔn dɛn.
Fabrication Options: Dɛn kin tɔk bɔt fɔ kɔt, CNC routing, drɔlin, engraving ɛn ɔda prɔsesin rikwaymɛnt dɛn akɔdin to drɔin dɛn.
Broda PVC Fom Board Portfolio: Di wan dɛn we de bay kin kɔmpia bak PVC Seluka Fom Bod, PVC Ko-Ekstrushɔn Fom Bɔd ɛn PVC Laminated Fom Bod.
Infɔmeshɔn Nid fɔ wan PVC Fri Fom Bɔd Kɔt
| Aplay fɔm |
Dijital printin, sayn, displei, ɛgzibishin, fɔ mek mɔdel, fɔnicha ɔ fɔ mek tin dɛn |
| Fom Tayp we yu kin yuz |
Fri fom, Celuka, co-extruded ɔ rɛkɛmɔndeshɔn nid fɔ de |
| Tik we i tik |
Tik ɛn tolɛreshɔn we dɛn nid |
| Tik |
Rikwayd density in g/cm3 ɔ target bod wet |
| Sayz fɔ di Shit |
915 × 1830 mm, 1220 × 2440 mm, 1560 × 3050 mm, 2050 × 3050 mm ɔ kɔstɔm |
| Kɔlɔ |
Wait, blak, rɛd, yɔlɔ, blu, grɛn ɔ kɔstɔm kɔlɔ |
| Sho |
Mat, smol, satin ɔ ɔda say we dɛn nid |
| Fɔ print |
Dijital, UV, skrin printin, vaynil aplikeshɔn ɔ ɔda prɔses |
| Fabrikeshɔn fɔ mek tin dɛn |
Kɔt, CNC routin, drɔlin, engravin, bond ɔ laminɛshɔn |
| Ples |
Yuz insay ɔ na do ɛn di tɛm we dɛn de ɛkspɛkt fɔ ɛkspos |
| Obe |
Rikwayd faya, RoHS, REACH ɔ ɔda prɔjek-spɛsifi k standad |
| Ɔmɔs |
Trayal ɔda, rɛgyula ɔda kwantiti ɛn ɛstimat ɛni ia dimand |
| Usay yu de go |
Di kɔntri we dɛn de go ɛn di pɔt |
PVC Fri Fom Bod FAQ
Wetin na PVC fri fom bod?
PVC fri fכm bod na wan εkspεnd polyvinyl klorayd shit we dεn mek yuz fri-fom εkstrushכn prכsεs. I gɛt layt we di sɛl dɛn strɔkchɔ ɛn i gɛt smɔl smɔl say we i de.
PVC fri fom bod gɛt PVC ?
Yɛs. 'Fri fom' de tɔk bɔt di fri-fom manufakchurin prɔses. I nɔ min se di prɔdak nɔ gɛt polivinyl klorayd.
PVC fri fom bod na di sem wit PVC -fri bod?
Nɔ PVC fri fom bod stil na PVC matirial. Wan PVC -fri bod spɛshal min wan matirial we dɛn mek witout PVC .
PVC fri fom bod na di sem wit we dɛn dɔn ɛkspɛn PVC ?
Fri-fom PVC na pat pan di εkspεnd PVC shit famili. Ekspand PVC na wan brayt tεm we kin inklud difrεn fכm-bכd mεnεjmεnt strכkchכ dεm.
Wetin na di difrɛns bitwin fri fom ɛn Sɛluka PVC ?
fri fכm de yuz fri εkspεns fכ mek wan laytwεt sεlyul shit, we di Cεluka prכsεsin de prodyuz wan mכr pronכns had כta skin rawnd di fכm kכr. Dɛn kin pik fri fom fɔ print ɛn displei, we dɛn kin tink bɔt Sɛluka fɔ kabinɛt ɛn fɔ mek am we ebi.
Wetin na di difrɛns bitwin fri fom ɛn kɔ-ɛkstrud PVC fom bɔd?
Fri fom de yuz fom PVC konstrakshɔn, we kɔ-ɛkstrud bod dɛn de yuz fom kɔr togɛda wit dens kɔ-ɛkstrud sɔfays layers.
Us tiknes HSQY de saplae?
di kכrant linked HSQY PVC fכm bod prodakt dεm kכba aprכksimatli 1–35 mm. Di rεnj we de fכ wan spεsifi k fri-fכm dεnsiti εn shit saiz fכ kכnfכm bifo yu כda.
HSQY de saplae 4 × 8 PVC fom bod?
Yɛs. 1220 × 2440 mm, we na lɛk 4 × 8 ft, na standad fɔmat insay di HSQY PVC fom bod rɛnj we de naw.
Us ɔda PVC fom bod saiz dɛn de?
Di HSQY prodak dɛm we de naw inklud bak 915 × 1830 mm, 1560 × 3050 mm ɛn 2050 × 3050 mm fɔmat dɛm, wit kɔstɔmayz dimɛnshɔn dɛm we de fɔ fayn fayn prɔjek dɛm.
Us density PVC fom bod a fɔ bay?
Di aprɔpriet density dipen pan di bod tik, finish saiz, printin, CNC mashin, fastener rikwaymɛnt ɛn rigiditi we dɛn nid. Inklud density in di RFQ ɛnitɛm we i pɔsibul.
Yu tink se PVC fri fom bod kin print dijital wan?
Yɛs. Print ɛn sayn na men yus fɔ fri-fom PVC . Dɛn fɔ tɛst di ink kɔmpatibiliti wit di bɔd sɔfays ɛn di printin sistem we dɛn dɔn pik.
Yu tink se PVC fri fom bod kin bi skrin print?
Yɛs. Yu kin yuz fayn smol PVC fom surfaces fɔ skrin-printin aplikeshɔn afta dɛn dɔn kɔnfyus ink kɔmpatibiliti.
Yu tink se dɛn kin print ɔl tu di say dɛn na PVC fom bod?
Dɛn kin ebul fɔ evalyu di rayt dɛbul-smol gred dɛn fɔ dubl-sayd printin. Spɛsifik dis rikwaymɛnt bifo prodyuz.
Yu tink se PVC fri fom bod kin bi CNC rout?
Yɛs. PVC fom bod kin bi CNC routed en engraved yuz suitable tooling, fid ret en kot paramita.
Yu tink se PVC fom bod kin drɔ?
Yɛs. Dɛn kin drɔ di rayt PVC fom gred dɛn ɛn mek dɛn fast am wit mashin. Fastener pefomans dipen pan bod density, tiknes en edj distans.
Yu tink se PVC fom bod kin glu?
Yɛs. Yuz wan adhesive sistem we dɛn kɔnfyus se i kɔmpitabl wit PVC ɛn di sɛkɔn bɔnd sabstret.
Yu tink se PVC fri fom bod kin peint?
Suitabl PVC fom bod kin peint afta surface pripia en koting kompitibiliti don konfam.
Yu tink se PVC fom bod kin bi laser kot?
Kɔnvɛnshɔnal lɛsa kɔt nɔ de rɛkɔmɛnd as difɔlt prɔses fɔ PVC bikɔs ɔt PVC kin mek kɔrosiv ɛn hazada fum. Mɛkanikal kɔt ɔ CNC routin na jɔs mɔ aprɔpriet pas nɔmɔ dɛn yuz spɛshal PVC -kapabl ikwipmɛnt.
Na PVC fri fom bod watapruf?
εkspεnd PVC gεt lכw wata absכpshכn εn gud mכsichכ rεsistεns. Finish outdoor installations fɔ stil tink bɔt jɔyn, mawntin, ɛksplɔz edj ɛn ɔvala sistɛm dizayn.
Yu kin yuz PVC fri fom bod na do?
Dɛn kin yuz fayn gred fɔ sayn ɛn displei dɛn we de na do, bɔt fɔ fit fɔ lɔng tɛm dipen pan UV we dɛn de ɛksplɔz, kɔlɔ, gred, instɔleshɔn ɛn di savis layf we dɛn de op fɔ.
PVC fri fom bod fayapruf?
Nɔ tɔk bɔt di wan ol kategori se faya nɔ de faya ɔlsay. Faya pefɔmɛns dipen pan fɔmyulashɔn, density, tiknes ɛn di aplikebul tɛst standad.
PVC fri fom bod nɔ de ambɔg di envayrɔmɛnt?
Di wɔd 'fri fom' na manufakchurin wɔd ɛn i nɔ min se di matirial nɔ gɛt PVC . Envayrɔmɛnt klem fɔ sɔpɔt bay di ɛksaktɔl fɔmyulashɔn, kɔmplians dɔkyumentri ɛn ɛnd-ɔf-layf kɔndishɔn.
Us kɔlɔ dɛn de?
Wait na di standad kɔlɔ. Wi kin tɔk bak bɔt blak, rɛd, yɔlɔ, blu, grɛn ɛn kɔstɔm kɔlɔ dɛn akɔdin to di bɔd spɛsifikɛshɔn.
HSQY kin kot PVC fom bod to saiz?
Dɛn kin tɔk bɔt di kɔstɔm shit dimɛnshɔn ɛn di tin dɛn we dɛn nid fɔ kɔt to di sayz akɔdin to di tik, dɛnsiti, tolɛreshɔn ɛn kwantiti.
A kin aks fɔ PVC fom bod sɛmpul dɛn?
Dɛn kin tɔk bɔt di sampul dɛn we de fɔ evaluate density, tiknes, surface, whiteness, printing ɛn mashining pefɔmɛns bifo kɔmɛshɔnal prodakshɔn.
Us infɔmeshɔn a fɔ sɛn fɔ kot?
Gi aplikeshɔn, fom-bɔd tayp, tik, dɛnsiti, shit dimɛnshɔn, kɔlɔ, sɔfays, printin ɔ fabrikeshɔn prɔses, kwantiti ɛn ples fɔ go.
Rikwest wan PVC Fri Fom Bod Kot
Yu de luk fɔ wan rilibul PVC fri fom bod manifakta we , dɛn dɔn ɛkspɛn PVC shit saplay ɔ kɔstɔm printabl PVC fom bod fɔ sayn, advatayzmɛnt, ɛgzibishin ɛn fɔ mek?
Send HSQY yu rikwayd tiknes, density, sheet saiz, kala, printin we ɛn ɛstimat bay bay kwantiti. If yu nɔ shɔ if fri fom, Sɛluka ɔ kɔ-ɛkstrud PVC bɔd bɛtɛ fɔ yu aplikeshɔn, gi di las yus, rigiditi we yu nid, sɔfa ɛn fabrikeshɔn we so dat dɛn go ebul fɔ evaluate di aprɔpriet bod strɔkchɔ.
