PP Sheet we gɛt tɛkstɔr

Tekstured PP Sheet Manufacturer ɛn Wholesale Supplier

HSQY Plastic de mek ɛn saplae tɛkstɔr polypropylene sheet fɔ pak, steshɔnari, printin, ɔtomotiv intɛriɔ, riyuz bɔks, industrial protɛkshɔn, advatayzmɛnt displei, layt difyushɔn ɛn kɔstɔm plastic fabrikeshɔn.

Wi tɛkstɔr PP shit rɛnj inklud mat, frɔst, twil, san, patɛn ɛn translucent sɔfays. Klia, natura, wayt ɛn kɔstɔm-kɔlɔ polipropilɛn shit dɛn de insay flat-shit ɔ rol fɔmat akɔdin to di tik ɛn prodakshɔn spɛsifikɛshɔn.

Standart prodak program dεm jεnarali kכba tiknes frכm 0.08mm to 5mm, wit wit we de rich 1500mm כ 1600mm fכ sεlekt prodakt. Kastom tiknes, wit, lɔng, kɔlɔ, sɔfayz tɛkstɔr, korona tritmɛnt ɛn fɛnshɔnal fɔmyulashɔn dɛn kin evalyu fɔ kwalifay bɔlk ɔda.

Wetin Na Tekschɔ PP Shit?

Tekschɔ PP shit na ɛkstrud polipropilɛn shit wit mat, frɔst, twil, san, lɛda-greyn ɔ ɔda ɛmbos sɔfays na wan ɔ ɔl tu di say dɛn.

di surface patεn na nכmal wan dεn kin kriyayt di tεm we dεn de εkstrushכn bay we dεn pas di wam polypropylene sheet tru tεkschur rכla dεm. dis de transfכm wan kכntroled patεn to di shit we i de εp fכ mεnten kכnsistεnt tik, apinεns εn sכfayz strכkchכ.

We yu kɔmpia am wit wan smol ɔ ay-glos PP shit, wan tɛkstɔr polypropylene sheet de mek i luk saf, i de ridyus di riflɛkshɔn we pɔsin kin si, i kin ayd di finga prɛnt ɛn layt hanlin mak dɛn, ɛn i kin gi mɔ taktil grip.

Di tɛkstɔr nɔ de mek di sheet bi wan sɛtifiket anti-slip ɔ skrach-rɛsistant matirial ɔtomɛtik wan. Projɛkt dɛn we nid wan spɛshal kɔfishin fɔ frikshɔn, glos valyu, abrashɔn rɛsistɛns ɔ skrach rɛytin fɔ tɔk bɔt di tɛst we dɛn nid ɛn di valyu we dɛn want fɔ du.

HSQY Tekstur Polipropilεn Sheet Rεnj

Di HSQY kategori we de naw inklud tɛkstɔr, mat, frɔst, twil, natura, kɔlɔ ɛn smol PP shit opshɔn dɛn. Di wan dɛn we de bay kin kɔmpia di sɔfa, di kɔlɔ ɛn di sapɔt fɔmat bifo dɛn pik wan prɔdak fɔ tɛst.

Di prodakt we de, tiknɛs tolɛreshɔn, maksimal wit, rol dayamita, kɔlɔ, tɛkstɔr ɛn minim ɔda kwantiti kin difrɛn bay prɔdak. Faynal spesifikeshɔn dɛn fɔ kɔnfyus insay di kot, aprɔv sampul ɛn bay kɔntrakt.

Jɛnɛral Tekstur PP Shit Spɛsifikeshɔn dɛn

Valyu dɛm lɛk tik, wit, dɛnsiti, layt transmishɔn, impak trɛnk ɛn savis tɛmpracha dipen pan di spɛshal polypropylene gred, aditiv ɛn prodakshɔn spɛsifikɛshɔn. Teknik valyu dɛn fɔ kɔnfɔm yuz di data sheet fɔ di ɛksaktɔl prɔdak we dɛn bay.

PP Sheet Surface Tekstur dɛn we de

Tekstɔr nem dɛn nɔ ful-ɔp fɔ standad bitwin di wan dɛn we de mek am. Di wan dɛn we de bay fɔ gi wan shit sampul we dɔn de, klos-ap foto ɔ aprɔv tɛkstɔr rɛfrɛns we sɔfays maching impɔtant.

Ki Bɛnifit dɛn fɔ Tekstɔr Polipropilɛn Shit dɛn

Layt Wet Kɔnstrɔkshɔn

Polipropilɛn gɛt smɔl density we yu kɔmpia am wit bɔku ɔda rigid plastic dɛn. Dis kin ridyus di wet fɔ di pak, fɔlda, layna, panɛl ɛn di kɔmpɔnɛnt dɛn we dɛn mek.

Durable ɛn Impact-Tolerant

Suitabl PP gred dεm de gi yusful taf, taya rεsistεns εn rεsistεns fכ ripit hεndlin. Dɛn kin pik kɔpɔlimɛr gred dɛn we dɛn nid fɔ impɔtant lɔw-tɛmpracha impak pefɔmɛns.

Aktual impak resistans dipen pan di resin gred, tiknes, temperechur, aditiv, fom histri en finish-pat dizain.

Ridyushɔn we pɔsin kin si we i de si

Mat ɛn frɔst tɛkstɔr dɛn de riflɛkt less dairekt layt pas polish PP. Dis kin mek di kɔva, displei, panɛl dɛn we dɛn print ɛn di tin dɛn we dɛn pak ɔnda brayt layt we de insay os, luk fayn.

Impɔtant Taktil Grip

Twil, san ɛn lɛda-greyn patɛn kin gi mɔ taktil grip pas wan smol say. Dis kin fayn fɔ fɔlda dɛn we yu kin ol wit an, bɔks dɛn we yu kin yuz bak, tre, layna ɛn tin dɛn we de protɛkt yu.

Usay slip resistans na sef-kritikal, di aktual sheet fɔ tɛst ɔnda di lod we dɛn de ɛkspɛkt, kɔntaminɛshɔn, mɔstɔ ɛn tɛmpracha kɔndishɔn.

I de ayd Finga Prɛnt ɛn Layt Mak dɛn

Tɛkstɔr sɔfays kin mek finga prɛnt, layt skɔf ɛn hanlin mak dɛn nɔ de si pas pan ay-glos polypropylene. Dis kin ɛp fɔ mek yu luk klin we yu de yuz am bɔku tɛm.

Mɔstɔ Resistɛns

PP de absɔb smɔl mɔstɔ ɛn i fayn fɔ yuz bak fɔ pak, divayda, fɔlda ɛn kɔmpɔnɛnt dɛn we dɛn kin yuz na say dɛn we nɔmal fɔ wet ɔ wet.

Kεmikכl Resistεns

Polipropilεn de rεsist bכku diluted asid, alkali, כyl, ditarjen εn klin kεmεkal dεm. Dis de mek i yusful fɔ industrial pak, lab divayd, riyuz kɔntena ɛn kemikal-prɔsɛsin ɛnvayrɔmɛnt.

PP nɔ de rɛsist to ɛvri kemikal. Dɛn fɔ ebul fɔ evaluate di kɔmpatibiliti bay we dɛn yuz di ɛksaktɔl kemikal nem, kɔnsɛntreshɔn, tɛmpracha, di tɛm we dɛn de ɛkspos, mɛkanikal strɛs ɛn di we aw dɛn de klin.

Ripit Fɔlding Kapabiliti

Tin PP sheet dɛn we dɛn mek fayn fayn wan kin mek living hinj dɛn we go de te fɔ fɔlda, bɔks dɛn we dɛn kin yuz bak, klos dɛn ɛn pak. Hinge dairekshɔn, tiknes, skɔ jɔyometri ɛn matirial ɔryenteshɔn fɔ bi kɔnsidɛrɛd we dɛn de disayn di prɔdak.

Tekstur PP Sheet Aplikeshɔn dɛn

Steshɔn ɛn Bayndin Kɔva dɛn

Dɛn kin yuz mat, frɔst ɛn twil polipropilɛn shit fɔ ring-baynda kɔva, notbuk kɔva, dɔkyumɛnt fɔlda, fayl divayda, indeks tab, mɛnyu kɔva, walet ɛn steshɔnari prɔdak dɛn we dɛn kin yuz bak.

Di tɛkstɔr finish kin impruv hanlin, ridyus finga prɛnt we pɔsin kin si ɛn gi wan mɔ difrɛn branded apinans pas wan smol sheet.

Pakɛj ɛn Bɔks dɛn we dɛn kin yuz bak

Tekschur PP shit kin chenj to riyuzable bɔks, pak sliv, patishɔn, layt pad, ritɔnable insɛt ɛn protɛktiv pak kɔmpɔnɛnt.

Dɛn kin skor ɛn fold tin sheet dɛn, we dɛn kin kɔt tik tik sheet dɛn, wɛl ɔ dɛn kin fast am wit mashin insay strɔkchɔ dɛn we dɛn kin yuz bak.

Print ɛn Advatayzmɛnt

Yu kin yuz PP sheet dɛn we dɛn dɔn trit wit tɛkstɔr fɔ skrin printin, UV printin, lɛbl, indo sayn, prɔmoshɔnal panɛl ɛn pɔynt-ɔf-pɔch displei.

Di tɛkstɔr de afɛkt di ink kɔvarej ɛn di print glos we i tan lɛk. Wan print trayal fɔ dɔn yuz di fayn ink sistɛm, sɔfa tritmɛnt, kɔring prɔses ɛn artwok.

Ɔtomotiv ɛn Kɔmishɔn Trak Intɛriɔ

Tik tɛkstɔr PP ɔ PP kɔpɔlimɛr shit dɛn kin evalyu fɔ motoka trɔnk layna, vɛn layn, domɔt-panɛl bak, protɛktiv kɔva, intɛriɔ trim ɛn laytwɛt kladin.

Otomotiv projɛkt dɛn fɔ spɛsifa impak rikwaymɛnt, tɛmpracha saykl, ɔda limit, UV ɛksplɔshɔn, flammabiliti, dimɛnshɔnal stebiliti ɛn fastɛns kɔndishɔn.

Indastrial Divayda ɛn Protɛktiv Panɛl dɛn

Dɛn kin mek tɛkstɔr polipropilɛn insay mashin kɔva, divayda, gad, layna, wok-sɔfa kɔmpɔnɛnt ɛn kɔlɔ-kɔd industrial panɛl usay dɛn nid fɔ gɛt lɔw wet ɛn kemikal rɛsistɛns.

Fɔ Prosɛs Fɔd ɛn Drink

Dɛn kin yuz di rayt it-kɔntakt PP gred fɔ divayda, insɛt we dɛn kin yuz bak, tre, prɔses-eria panɛl ɛn pak kɔmpɔnɛnt dɛn.

Fɔd-kɔntakt suitabiliti fɔ kɔnfyus fɔ di ɛksaktɔ rɛsin, pigmɛnt, aditiv, sɔfayz tritmɛnt ɛn dɛstineshɔn-maket rigyuleshɔn.

Layt ɛn Difyuz Panɛl dɛn

Frosted ɛn mat translucent PP sheet kin difyuz layt fɔ indo lampshades, iluminated displei ɛn dɛkɔretiv laytin kɔmpɔnɛnt dɛn.

Di wan dɛn we de bay fɔ sho di layt transmishɔn we dɛn nid, di haz, di tɛmpracha we dɛn de yuz, di layt sɔs, di flaym standad ɛn distans frɔm di ɔt sɔs.

Medikal ɛn Labɔrɔtɔri Kɔmpɔnɛnt dɛn

Dɛn kin yuz PP shit dɛn we dɛn dɔn pik fɔ divayda dɛn na lɛbɔretri, inschrumɛnt trey, ikwipmɛnt kɔva, ɔganayz sistɛm ɛn kɔmpɔnɛnt dɛn we nɔ riaktiv.

Medikal ɔ laboratori aplikeshɔn dɛn nid fɔ validet klin, sterilayz kɔmpatibiliti, kemikal ɛksplɔshɔn, rigyuletɔri dɔkyumentri ɛn finish-pat pefɔmɛns.

Homopolimer PP vs Kopolimer PP

di tεm dεm homopolimכr εn kכpolimכr de dεskrεb brayt mεtirial famili dεm. Faynal pefɔmɛns dipen pan di ɛksaktɔ rɛsin gred, impak modifya, fil, pigmɛnt ɛn ɛkstrushɔn kɔndishɔn.

Tekstur PP sheet vs smooth PP sheet

Tekstur PP Sheet vs ABS ɛn HDPE Sheet

Printin pan Tekstur PP Shit dɛn

Polipropilεn gεt lכw sכfayz εnεji, so PP we dεn nכ trit kin gi pwεl ink, kכt εn adhesive bonding. Di printin projɛkt dɛn fɔ sho if dɛn nid fɔ gɛt korona, flaym, plasma ɔ ɔda tritmɛnt fɔ di sɔfa.

Di wan dɛn we de bay fɔ du ink-adhesion, tep, abrasion, folding, kemikal ɛn ol tɛst we dɛn de yuz di aktual prodakshɔn shit.

Tekstur PP sheet fabrikeshɔn

Kɔt ɛn Day Kɔt

Tin PP sheet dɛn kin kɔt gilɔtin, day kɔt ɔ panch. Yu kin kɔt tik sheet dɛn wit fayn saw, routers ɔ CNC ikwipmɛnt.

Shap tul, kɔrɛkt kliarens ɛn inof sheet sɔpɔt de ɛp fɔ ridyus bur, ɔt bildup ɛn dimɛnshɔnal distɔrshɔn.

Skɔring ɛn Fɔlding

Tin PP sheet dɛn kin skor ɛn fold fɔ fɔlda, bɔks ɛn pak. Di skɔ jɔyometri fɔ alaynɛd ​​wit di hinj dairekshɔn we dɛn nid fɔ impɔtant ripit-fold pefɔmɛns.

Tɛmofɔmin we dɛn kin yuz fɔ mek tin dɛn

Dɛn kin thermoform di PP sheet dɛn we fit fɔ bi trey, layna, insɛt ɛn kɔva dɛn we gɛt shep. PP nid fכ kכntrold hεt biכs di fכm winda kin sכm sכm amorphous plastic dεm.

Fɔm kin strɛch ɔ flat di ɔrijinal ɛmbos tɛkstɔr. Di tul dizayn, shit tɛmpracha, drɔ rɛsɛshɔn ɛn kol kɔndishɔn fɔ tɛst bifo dɛn prodyuz.

Plastik Weldin we dɛn kin yuz

Tik PP sheet dɛn kin jɔyn bay hot-gas wɛldin, ɛkstrushɔn wɛldin ɔ ɔda kɔmpatibl tɛmplastik-wɛldin we dɛn de yuz. Di wɛldin rod ɛn di bays shit fɔ yuz tin dɛn we go gri wit am.

Adhesive Bonding we gɛt fɔ du wit am

Standart adeziv nɔ de bon izi wan to polipropilɛn we dɛn nɔ trit. Bonding kin nid surface tritmεnt, wan PP-kompatibl prayma, spεshal adhesive כ mεkanikal fastening.

Mekanikal Fastening we dɛn kin yuz fɔ mek tin dɛn

We dɛn drɔ ɛn fast di PP sheet dɛn, di wan dɛn we de mek dizayn fɔ alaw fɔ mek dɛn ebul fɔ mek dɛn gɛt tɛmal ɛn dɛn nɔ fɔ tay dɛn pasmak. Hol saiz, edj distans, wash ɛn sɔpɔt strɔkchɔ fɔ pik fɔ di opareshɔn tɛmpracha rɛnj.

Tɛmpratura ɛn Pɔfɔmɛnshɔn na do

Tekschur PP shit pefomans na ay ɛn lɔw tɛmpracha dipen pan if di matirial na homopolim, kɔpɔlimɛr ɔ modifyed gred.

standad homopolimכr PP jεnarali de gi yusful stiffnεs na rum tεmprachכ bכt i kin bi mכr brit insay kol kכndishכn. Kopolimer PP na kɔmɔn we dɛn kin pik we dɛn nid fɔ impɔtant lɔw-tɛmpracha impak pefɔmɛns.

Standard polypropylene nɔto inhɛrɛnt wan fayn fɔ lɔng tɛm na do. Ultraviolet redyushɔn kin mek i fade, chalk, embrittlement ɛn mek di mɛkanikal-prɔpati lɔs.

Di projɛkt dɛn we de na do fɔ aks fɔ UV-stabilized fɔmyulashɔn ɛn spɛsifa di say we dɛn go ɛksplɔz, di kɔlɔ, di savis layf we dɛn de ɛkspɛkt, di tɛmpracha rɛnj ɛn di wɛda tɛst we dɛn nid.

Baya dɛn we nid ɛlevɛt-tɛmpracha pefɔmɛns kin rivyu HSQY dɛn            PP sheet rεnj we nɔ de ɔt    .

Kastom Tekstur PP Sheet Opshɔn dɛn

HSQY kin evalyu kɔstɔm polipropilɛn shit rikwaymɛnt fɔ pak kɔnvɔta, steshɔnari manifakta, ɔtomotiv saplay, printa, industrial fabricatɔ, ɔlsay ɛn distribyushɔn.

• Tik we dɛn mek fɔ yusɛf

• Customized wit ɛn sheet lɔng

• Rol ɔ kɔt-shit saplai

• Natural, klia, translucent, wayt ɔ kɔstɔm kɔlɔ dɛn

• Mat, frɔst, twil, san, lɛda-greyn ɔ patɛn tɛkstɔr

• Singl-sayd ɔ dabl-sayd ɛmbos

• Difrɛn tɛkstɔr dɛn na di tu say dɛn

• Korona tritmɛnt fɔ print

• Homopolimer ɔ kɔpɔlimɛr PP sɛlɛkshɔn

• Impact-modified fɔmyulashɔn dɛn

• Antistatik ɔ kɔnduktiv fɔmyulashɔn dɛn

• UV-stabiliz gred dɛn

• Flame-retardant gred dɛn we de ɔnda di standad we dɛn nid

• Fɔd-kɔntakt gred dɛn we de ɔnda di tin dɛn we di makit nid

• Kastom kot, A4 sheet ɛn sampul sheet

• Prayvet-lɛbul bag, katon, palet lɛbl ɛn ɛkspɔt pak

Speshal fכmyuleshכn dεm nכto standad prכpati dεm fכ εvri PP shit. Di pefɔmɛns we dɛn aks fɔ, di we aw dɛn de du di tɛst ɛn di rizɔlt we dɛn want fɔ du, dɛn fɔ kɔnfyus bifo dɛn prodyuz am.

Flame-Retardant, Antistatic ɛn Fɔd-Kɔntakt Opshɔn dɛn

PP Sheet we nɔ de mek flaym

Standard polypropylene na tin we pɔsin kin bɔn ɛn i nɔ fɔ ɔtomɛtiks diskrayb am as flame retardant. Di prɔdak dɛm we nɔ de mek faya nid spɛshal fɔmyulashɔn ɛn dɛn fɔ tɛst dɛn akɔdin to di standad ɛn tik we dɛn nid.

Projek dɛm we nid fɔ mek flaym pefɔmɛns kin rivyu HSQY dɛn            flame-retardant PP sheet rεnj    .

Antistatik ɛn Kɔnduktiv PP Sheet

Antistatik ɔ kɔnduktiv fɔmyulashɔn dɛn kin ebul fɔ evaluate fɔ ilɛktroniks pak, trey, divayda ɛn ikwipmɛnt kɔmpɔnɛnt dɛn. Di wan dɛn we de bay fɔ tɔk bɔt di sɔfa ɔ volyum rɛsistɛns we dɛn nid, di we aw dɛn de tɛst ɛn di tɛm we dɛn go de fɔ lɔng tɛm.

Fɔd-Kɔntakt PP Sheet

Fɔd-kɔntakt kɔmplians dipen pan di ɛksaktɔ polipropilɛn rɛsin, pigmɛnt, aditiv, risaykul kɔntinyu, korona tritmɛnt ɛn dɛstineshɔn-maket rigyuleshɔn.

Di wan dɛn we de bay fɔ gi di kayn it, di tɛm we dɛn fɔ kɔntakt, di tɛmpracha, di we aw dɛn de prosɛs am ɛn di rigyuletɔri standad we dɛn nid bifo dɛn gri fɔ di matirial.

Risaykul ɛn Sastaynabiliti

Pɔlipropilɛn na tin we dɛn kin no bay rɛsin kɔd 5 ɛn dɛn kin risaykul am wit mashin usay di rayt kɔlekɛshɔn, sɔt ɛn prɔsesin fasiliti dɛn de.

Aktual risaykulbiliti dipen pan di finish-prɔdak dizayn, pigmɛnt, fil, flame retardant, kɔnduktiv aditiv, printin, lɛbl, adeziv, kɔntaminɛshɔn ɛn lokal risaykul infrastukchɔ.

If yu yuz PP sheet we go de te na fɔlda dɛn we yu kin yuz bak, bɔks dɛn we yu kin yuz bak, divayd ɛn pak sistɛm dɛn, dat kin ridyus di frɛkuɛns we dɛn kin riples di prɔdak. Bayer kin optimize sheet dimɛnshɔn bak ɛn rikavari klin prodakshɔn skrap fɔ ridyus matirial west.

Kwaliti Chɛk Bifo Bɔlk Prodakshɔn

Customized textured PP sheets fɔ apruv yuz wan fizik sampul bifo mas prodakshɔn. Di chɛk dɛn we dɛn kin se na:

• Tiknɛs ɛn dimɛnshɔnal tolɛreshɔn

• Shit wit, rol wit ɛn rol dayamita

• Tekstɔr tayp, dip ɛn yunifɔmiti

• Singl-sayd ɔ dabl-sayd tɛkstɔr

• Kɔlɔ, opasiti ɛn batch kɔnsistɛns

• Transparency, haze ɛn layt transmishɔn

• Flatness, kɔl ɛn shrinkage

• Rigiditi ɛn lɔw-tɛmpracha impak pefɔmɛns

• Printin tritmɛnt ɛn dayn lɛvɛl

• Ink adhesion ɛn abrashɔn rɛsistɛns

• Kot ɛn day-kɔt pefɔmɛns

• Skɔring, fold ɛn liv-hinj pefɔmɛns

• Tɛmofɔmin ɛn tɛkstɔr ritɛnshɔn

• Kεmikכl kכmpatibiliti

• Tɛmpratura ɛn UV pefɔmɛns usay i apɔynt

• Fɔd-kɔntakt, flaym, antistatik ɔ ɔda tin we dɛn nid fɔ fala

Di tin dɛn we yu fɔ du fɔ pak ɛn kip tin dɛn

Stɔ Sheet dɛn na wan Flat Sɔpɔt

Flat sheet dɛn fɔ de na klin ɛn ful sɔpɔt palet dɛn. sכpכt we nכ ivin kin mek i kכl, bεnd כ ed difכmeshכn.

Kontrol Rol Tɛnshɔn

Dɛn fɔ kip ɛn handel di rol dɛn akɔdin to di rol dayamita, di kɔr saiz ɛn di say we dɛn de waynd. If yu stak pasmak, dat kin afɛkt di tɛkstɔr ɛn di sheet flat.

Protɛkt di Surface

Kip di sheet dɛn na dɛn ɔrijinal pak te dɛn chenj dɛn. Nɔ drɛg di say we gɛt tɛkstɔr akɔdin to dɔti ɔ abrasive matirial dɛn.

Avɔyd Ɔt ɛn Dayrɛkt San Layt

Stɔr polypropylene insay os na dray, ventilated envayrɔmɛnt fa frɔm dairekt san layt, hita ɛn big tɛmpracha chenj.

Kɔntrol di Tɛm we dɛn De Print fɔ Stɔrej

Korona tritmɛnt kin rɔtin we dɛn de kip am. Print-grɛd matirial fɔ de ɔnda kɔndishɔn dɛn we dɛn gri ɛn yuz insay di kɔnfyus tritmɛnt-ritɛnshɔn tɛm.

Infɔmeshɔn we dɛn nid fɔ mek wan Tɛkschɔ PP Shit Kɔteshɔn

Fɔ gi kɔmplit tɛknikal ɛn bay bay infɔmeshɔn de ɛp HSQY fɔ rɛkɔmɛnd wan fayn gred ɛn kɔlkul prayz, prodakshɔn tɛm ɛn pak kɔrɛkt wan.

• Tik we dɛn nid

• Shit wit ɛn lɔng

• Rol ɔ kɔt-shit fɔmat

• Rikwayd rol lɔng, dayamita ɛn kɔr saiz

• Natural, klia, translucent, wayt ɔ kɔstɔm kɔlɔ

• Mat, frosted, twill, san, lɛda-greyn ɔ kɔstɔm tɛkstɔr

• Singl-sayd ɔ dabl-sayd ɛmbos

• Transparency, haze ɔ opacity we nid fɔ de

• Homopolymer ɔ kɔpɔlimɛr prɛfɛkshɔn

• Printin method ɛn di dyne lɛvɛl we dɛn nid

• Kɔt, fold, wɛldin ɔ thermoforming prɔses

• Opareshɔn tɛmpracha ɛn ɔdasay

• Kεmikכl-kכntakt kכndishכn dεm

• Rikwayd fud-kɔntakt, antistatik, UV ɔ flaym pefɔmɛns

• Ɔda kwantiti ɛn ɛstimat ɛni ia dimand

• Di tin dɛn we dɛn nid fɔ pak, palet ɛn lɛbul

• Di kɔntri we yu want fɔ go ɛn di tɛm dɛn we dɛn fɔ sɛn di tin

• Rikwayd sampul ɛn target delivri de

• Rifrɛns sampul, drɔ ɔ tɛkstɔr foto if i de

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt PP Shit dɛn we gɛt tɛkstɔr

Wetin na wan tɛkstɔr polipropilɛn sheet?

Tekschur polypropylene sheet na extruded PP sheet wit mat, frosted, twill, sand, leather-grain ɔ ɔda embossed surface na wan ɔ ɔl tu di say dɛm.

Wetin na di difrɛns bitwin tɛkstɔr ɛn ɛmbos PP sheet?

Dɛn kin yuz di wɔd dɛn fɔ chenj dɛnsɛf. Embossed nɔmal fɔ diskrayb di manufakchurin prɔses, we textured de diskraib di finish surface apinans ɛn fil.

Us tiknes HSQY de saplae?

HSQY in kɔrɛnt listed prodak program dɛn jɔs de kɔba lɛk 0.08mm to 5mm. Tik we de dipen pan di kɔlɔ, tɛkstɔr, wit, rɛsin gred ɛn saplai fɔmat.

Wetin na di maksimal wit fɔ tɛkstɔr PP sheet dɛn?

Dɛn kin gi di prɔdak dɛn we dɛn dɔn pik insay di waid we go rich lɛk 1500mm ɔ 1600mm. Maksimal wit de dipen pan tik, tɛkstɔr ɛn prodakshɔn rikwaymɛnt.

Yu tink se PP sheet dɛn we gɛt tɛkstɔr de insay rol?

Yɛs. Dɛn kin gi tin dɛn we gɛt tin-gej insay rol, ɛn dɛn kin gi tik tik sheet dɛn lɛk flat panɛl ɔ sheet we dɛn kɔt. Di wan dɛn we de bay fɔ gi di rol wit, lɔng, dayamita ɛn di kɔr saiz we dɛn nid.

Us sɔfayz tɛkstɔr dɛn de?

Di opshɔn dɛn we de kin inklud mat, frɔst, twil, san, patɛn ɛn lɛda-greyn sɔfays. Kastom ɛmbos kin bi evalyu akɔdin to tul ɛn ɔda volyum.

Yu tink se ɔl tu di say dɛn kin gɛt di sem tɛkstɔr?

Yɛs. Mat/mat, tɛkstɔr/tɛkstɔr, mat/smɔl ɛn ɔda tu-sayd kɔmbaynshɔn dɛn kin evalyu dipen pan prodakshɔn kapasiti.

HSQY kin mach wan tɛkstɔr we dɔn de?

Tekscha maching kin evalyu yuz fizik sampul ɔ ditayl rɛfrɛns. Eksakt maching kin nid fɔ gɛt kɔstɔm ɛmbos rɔla ɛn minim prodakshɔn kwantiti.

Yu tink se PP we gɛt tɛkstɔr de gi bɛtɛ grip?

wan tεkschur surface jεnarali de gi mכr taktil grip pas smol PP. Nɔ fɔ trit am lɛk sɛtifiket nɔ-slip sɔfays pas dɛn tɛst am ɔnda di kɔndishɔn dɛn we dɛn nid.

Na PP sheet we gɛt tɛkstɔr nɔ de skrach?

Tekscha kin mek layt skrat ɛn skɔf nɔ de si bɛtɛ, bɔt intrinsik skrat ɛn abrashɔn rɛsistɛns dipen pan di rɛsin, aditiv, tɛkstɔr ɛn tɛst kɔndishɔn.

Yu tink se dɛn kin print PP sheet dɛn we gɛt tɛkstɔr?

Yes, bɔt polypropylene nɔmal wan nid korona ɔ ɔda sɔfayz tritmɛnt fɔ rili ink adhesion. Di wan dɛn we de bay fɔ sho di we aw dɛn de print, di ink ɛn di dayn lɛvɛl we dɛn nid.

Yu tink se dɛn kin fold PP sheet dɛn we gɛt tɛkstɔr bɔku bɔku tɛm?

Tin PP sheet dɛn we dɛn mek fayn fayn wan kin mek living hinj fɔ fɔlda ɛn bɔks dɛn we dɛn kin yuz bak. Tiknes, skɔ shep, ɛkstrushɔn dairekshɔn ɛn fɔlding dairekshɔn fɔ tɛst.

Yu tink se dɛn kin thermoformed PP sheet dɛn we gɛt tɛkstɔr?

Suitabl PP gred kin bi thermoformed. We yu ɔt ɛn strɛch, i kin ridyus ɔ chenj di ɔrijinal tɛkstɔr, so dɛn fɔ tɛst di sheet wit di mold ɛn drɔ rishɔ we dɛn want.

Yu tink se dɛn kin glu PP sheet dɛn?

Polipropylene at fɔ bon wit ɔdinari adeziv bikɔs i nɔ gɛt bɔku ɛnaji we de ɔp. Spɛshal prayma, adeziv, sɔfayz tritmɛnt ɔ mɛkanikal fastɛns kin nid.

Yu tink se dɛn kin wɛldɔm PP sheet dɛn we gɛt tɛkstɔr?

Tik PP shit kin jɔyn yuz kɔmpatibl hot-gas ɔ ɛkstrushɔn-wɛldin prɔses. Di shit ɛn di wɛldin rod fɔ yuz kɔmpitabl polipropilɛn gred dɛn.

Yu tink se PP sheet dɛn we gɛt tɛkstɔr nɔ gɛt kemikal?

PP de rεsist bכku diluted asid, alkali, ditarjen εn כyl, bכt i nכ kכmpatibl wit εvri kεmikכl. di ekzak kεmikכl, kכnsantreshכn, tεmprachכ εn di tεm we dεn de εkspos.

Yu tink se PP sheet dɛn we gɛt tɛkstɔr nɔ de mek wata pas?

Polipropilɛn de absɔb smɔl mɔstɔ ɛn i fayn fɔ bɔku wet ɔ humid ɛnvayrɔmɛnt. Sim, fastɛns ɛn say dɛn we dɛn dɔn print kin stil nid fɔ mek dɛn ebul fɔ evaluate di watapruf we dɛn dɔn sɛpret.

Yu kin yuz PP sheet dɛn we gɛt tɛkstɔr na do?

Standard PP gɛt limited lɔng tɛm UV rɛsistɛns. Di projɛkt dɛn we de na do fɔ yuz UV-stabilized gred ɛn spɛsifa di ɛksplɔshɔn we dɛn de op fɔ, di kɔlɔ ɛn di savis layf we dɛn nid.

Yu tink se PP sheet dɛn we gɛt tɛkstɔr kin ebul fɔ bia wit lɔw tɛmpracha?

Lɔw-tɛmpracha pefɔmɛns dipen pan di matirial gred. kכpolimכr PP na jεnarali dεn kin fכs usay i nid fכ impruv kol-impakt rεsistεns.

Yu tink se PP sheet dɛn we gɛt tɛkstɔr nɔ de mek flaym?

Standard polypropylene nɔto inhɛrɛntly flame retardant. Dɛn fɔ pik wan spɛshal fɔmyulashɔn we nɔ de mek faya ɛn tɛst am akɔdin to di standad ɛn tik we dɛn nid.

Yu tink se antistatik tɛkstɔr PP sheet dɛn de?

Antistatik ɛn kɔnduktiv opshɔn dɛn kin ebul fɔ evaluate. Di wan dɛn we de bay fɔ gi di rɛsistɛns rɛnj we dɛn nid, di we aw dɛn de tɛst ɛn di tɛm we di antistatik de du.

Yu tink se PP sheet dɛn we gɛt tɛkstɔr fayn fɔ kɔntakt wit it?

Fɔd-kɔntakt gred dɛn kin de, bɔt dɛn fɔ kɔnfyus di kɔmplians fɔ di ɛksaktɔl rɛsin, pigmɛnt, aditiv, sɔfayz tritmɛnt ɛn di dɛstineshɔn makɛt.

Yu tink se dɛn kin risaykul di polipropilɛn sheet dɛn we gɛt tɛkstɔr?

Dɛn kin risaykul PP usay fayn fɔ gɛda ɛn prɔsesin fasiliti dɛn de. Aditiv, lɛbl, ink, adeziv ɛn kɔntaminɛshɔn kin afɛkt di aktual risaykul.

HSQY kin prodyuz kɔstɔm kɔlɔ dɛn?

Yɛs. Kastom translucent ɔ opaque kala dɛn kin evalyu yuz wan Pantone rɛfrɛns, kala chip ɔ fizik sampul. Minimum prodakshɔn kwantiti dɛn nɔmal fɔ aplay.

Wetin na di minimum ɔda kwantiti?

MOQ de difrɛn bay tik, wit, kɔlɔ, tɛkstɔr, rɛsin gred ɛn fɛnshɔnal fɔmyulashɔn. Standart prodak ɛn kɔstɔm ɛmbos projɛkt kin gɛt signifyant difrɛn minim kwantiti.

Yu tink se pipul dɛn we de bay kin aks fɔ sampul?

Sampul dɛn kin de fɔ di kɔlɔ ɛn tɛkstɔr dɛn we dɔn de. Kastom kɔlɔ ɔ ɛmbos sɛmpul dɛn kin nid fɔ sɛtup kɔst ɛn ɔda tɛm fɔ pripia.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?

Gi di tiknes we dɛn nid, dimɛnshɔn, saplai fɔmat, kɔlɔ, tɛkstɔr, aplikeshɔn, printin ɔ fabrikeshɔn we, pefɔmɛns rikwaymɛnt, kwantiti, dɛstineshɔn ɛn pak rikwaymɛnt.