HI PS shit fɔ Pakɛj & Indastrial Pat dɛn

HI PS shit fɔ Pakɛj & Indastrial Pat dɛn

HSQY HIPS sheet matirial de kam togɛda impak rɛsistɛns, rigiditi, laytwɛt kɔnstrɔkshɔn ɛn izi fabrikeshɔn fɔ pak, displei, aplayans kɔmpɔnɛnt, protɛktiv kɔva ɛn industrial tɛmfɔm pat dɛn.

High Impact Polystyrene, we dɛn kin shɔt as HIPS , na polistayn we dɛn modify wit rɔba faz fɔ mek i taf ɛn nɔ krak we yu kɔmpia am wit standad Jɛnɛral Pɔpɔz Polistayn.

HSQY naw de saplae HIPS ɛn PS sheet matirial s frɔm lɛk 0.2mm to 6mm tik, wit wit we go rich 1600mm ɛn wayt, blak ɔ kɔstɔmayz kɔlɔ fɔ tɛmɔfɔm, vaykum fɔm, printin, pak ɛn industrial fabrikeshɔn.

HIPS Polistayn Shit Spɛsifikeshɔn dɛn

Spɛsifikeshɔn Notis: Faynal tiknɛs tolɛreshɔn, dimɛnshɔn, kɔlɔ, sɔfayz finish ɛn fɔm pefɔmɛns fɔ kɔnfɔm akɔdin to di HIPS gred we dɛn dɔn pik ɛn di aplikeshɔn we dɔn dɔn.

Wetin Na Ay Impɛkt Polistayn Shit?

High Impact Polystyrene na wan modifyed polystyrene matirial we dɛn mek fɔ ɔvakom di rili brital bihayvya fɔ standad Jɛnɛral Pɔpɔz Polistayn. Wan rɔba-modifyed faz de impɔtant tafnɛs we i de mentɛn yusful rigiditi ɛn prɔsesin pefɔmɛns.

HIPS na nכmal opεk pas fכ hεli transparent. Wait ɛn blak na kɔmɔn kɔmɛshɔnal kɔlɔ dɛn, we dɛn kin mek kɔstɔm kɔlɔ ɛn aplikeshɔn-spɛsifi k sɔfays finish dɛn bak akɔdin to di prɔjek.

Di matirial na kɔmɔn fɔ pik fɔ ay-volyum thermoformed, printed ɛn fabricated prodak dɛm usay bayer dɛn nid fɔ gɛt kɔst-ɛfɛktiv kɔmbaynshɔn fɔ impak resistans, laytwɛt kɔnstrɔkshɔn ɛn izi prɔsesin.

HI PS shit Nɔto Ay-Dɛnsi E PS ɔ XPS Fom

Dis HSQY prodak na wan sɔlid Ay Impɛkt Polistayn sheet matirial . I nɔ fɔ kɔnfyus wit ɛkspanda polistayn (E PS ) ɔ ɛkstruded polistayn ( XPS ) fom insuleshɔn bɔd.

Ki Bɛnifit dɛn fɔ HI PS shit

• Impɔtant impak rɛsistɛns: Rɔba modifyeshɔn de gi bɛtɛ tafnɛs ɛn rɛsistɛns to krak pas standad GPPS .

• Gud thermoformability: Suitabl HIPS gred kin vaykum fɔm ɔ thermoformed insay trey dɛn , layna, kɔva ɛn haus.

• Layt ɛn rigid: HIPS de gi yusful stiffnɛs we i de kip di kɔmpɔnɛnt dɛn we dɔn dɔn rili layt.

• I izi fɔ mek: HIPS kin kɔt, rout, drɔ, day kɔt ɛn CNC mashin yuz fayn prɔsesin we.

• Printable surface: Suitabl sheet matirial surfaces kin sɔpɔt skrin, dijital ɛn ɔda printin prɔses afta kɔmpatibiliti tɛst.

• Dɛn kin peint ɛn dekɔret: Dɛn kin put kɔtin, lɛbl ɛn laminat we kɔmpitabl usay dɛn nid am.

• Kastom kɔlɔ dɛn: Dɛn kin tɔk bɔt wayt, blak ɛn prɔjek-spɛsifi k kɔlɔ dɛn akɔdin to wetin dɛn nid fɔ mek.

• Kɔst-ɛfɛktiv prɔsesin: HIPS na kɔmɔn we dɛn kin pik fɔ volyum tɛmfɔmin ɛn fabrik aplikeshɔn usay dɛn nid ikɔnomik rigid plastic.

HI PS shit fɔ Pakɛj

HIPS kin tεmכfכm insay prכtektiv trey dɛn , insεt, klamshεl-stayl kכmכpכnt dεm εn כda rigid pak strכkchכ dεm usay impak rεsistεns εn dimεnshכnal stεbiliti imכtant.

Di wan dɛn we de bay pak fɔ spɛsifa di tre dimɛnshɔn, fɔm dip, stiffness we dɛn nid, stak dizayn, prodak wet ɛn ɛni rigyuletɔri rikwaymɛnt bifo dɛn pik wan matirial gred.

Standard HIPS nɔ fɔ ɔtomɛtik diskrayb as i fayn fɔ it, famasi ɔ mɛdikal kɔntakt. Dɛn aplikeshɔn dɛn de nid fɔ kɔnfɔm di rayt matirial gred ɛn di dɔkyumɛnt dɛn we dɛn fɔ yuz.

HI PS shit fɔ Tɛmofɔmin & Vaykum Fɔm

Tɛmofɔmin na wan pan di men kɔmɛshɔnal aplikeshɔn fɔ HIPS sheet matirial . di sheet matirial dεn hεt am te i pliable inof εn afta dat dεn shep am εgεst wan mold we de yuz vεkyum, prεshכn כ mεkanikal εp.

HIPS na tin we dɛn kin yuz fɔ trey dɛn , layna, ikwipmɛnt kɔva, haus, displei kɔmpɔnɛnt ɛn aplayans pat bikɔs fayn gred dɛn kin kɔba gud fɔmabiliti wit big tafnɛs pas standad polisitayn.

HI PS shit fɔ Aplayans Kɔmpɔnɛnt dɛn

HIPS na in dɛn kin evalyu bɔku tɛm fɔ frij layna, intɛriɔ aplayans panɛl, haus, kɔva ɛn trey dɛn bikɔs i de kɔba thermoforming pefɔmɛns, rigiditi, sɔfayz apinɛns ɛn ikɔnomik prɔsesin.

Fɔ aplayans aplikeshɔn, di wan dɛn we de bay fɔ spɛsifa di opareshɔn tɛmpracha, ditarjen ɔ kemikal ɛksplɔshɔn, fɔm dip, impak rikwaymɛnt, kɔlɔ ɛn sɔfays apinans bifo dɛn apruv wan gred.

HI PS shit fɔ Sayn & POP Displei dɛn

HIPS kin yuz fɔ rital sayn, POP/POS displei, advatayzmɛnt panɛl, ɛgzibishin grafik ɛn prɔmoshɔnal kɔmpɔnɛnt usay lɔw wet, sheet matirial rigiditi ɛn izi fabrication na yusful.

Print pefomans dipen pan sheet matirial surface, ink kemistri, curing kondishon en eni required surface tritment. Di kɔmni dɛn we de print fɔ tɛst di rial prodakshɔn gred bifo dɛn print fɔ kɔmɛshɔn.

HI PS shit fɔ Protɛktiv Kɔva & Hausin

HIPS kin kɔt ɔ thermoformed insay laytwɛt ikwipmɛnt kɔva, nɔ-strɔkchɔral haus, protɛktiv panɛl ɛn fabricated enklɔz.

Di prɔjek dɛn fɔ difayn di impak we dɛn nid, di span we dɛn nɔ sɔpɔt, di we aw dɛn de fast, di tɛmpracha we dɛn de wok ɛn di we aw dɛn de ɛksplɔz di envayrɔmɛnt so dat dɛn go ebul fɔ pik sheet matirial tik ɛn gred di rayt we.

HI PS shit fɔ Ɔtomotiv Intɛriɔ Kɔmpɔnɛnt dɛn

Sεlekt HIPS gred dεm kin kכnsidrεd fכ nכn-strכkchכral כtomotiv intayri trim εn fכm kכmכpכnt usay ikonomik prכsεsin, apinεns εn mכdarεt impak pεrformεns nid.

Otomotiv projɛkt dɛn fɔ spɛsifa ɔt rɛsistɛns, impak pefɔmɛns, ɔda, ɛmishin, flammabiliti ɛn OEM-spɛsifi k rikwaymɛnt dɛn. Standard HIPS nɔ fɔ ɔtomɛtik trit am as ɔtomotiv-kwalifay matirial.

HIPS vs. GPPS Polistayn Shit

HIPS vs. ABS Shit

Surface Finish, Printin & Dɛkɔreshɔn

Surface quality impɔtant we dɛn de yuz HIPS fɔ displei, sayn, aplayans pat ɛn dɛkɔretiv panɛl. Smɔl, glos, mat ɔ aplikeshɔn-spɛsifi k sɔfays rikwaymɛnt dɛn fɔ difayn bifo dɛn prodyuz.

Suitabl HIPS gred dɛn kin sɔpɔt printin, peint, lɛbl ɛn laminɛshɔn. Faynal pefɔmɛns dipen pan sɔfayz kɔndishɔn, ink ɔ kɔtin kemistri, kɔring prɔses ɛn post-prɔsɛsin ɔpreshɔn.

Katin, CNC Mashin & Fabrikeshɔn

HIPS kin kɔt, drɔ, rout, day kɔt ɛn CNC mashin yuz di rayt tul ɛn prɔsesin kɔndishɔn. Dis kin mek dɛn ebul fɔ gi di matirial as flat panɛl ɔ chenj am to kɔstɔm fɔ mek tin dɛn.

Tul jɔyometri, fid spid ɛn ɔt jenɛreshɔn fɔ kɔntrol akɔdin to tik fɔ mek dɛn kɔntinyu fɔ klin ed ɛn dimɛnshɔnal akkuracy.

Yuz insay os & na do

Standard HIPS na in dɛn kin yuz mɔ insay os ɔ na say dɛn we dɛn kin kɔntrol. Dɛn nɔ fɔ tek am se yu go de na do fɔ lɔng tɛm pas dɛn dɔn fɔmulayt di rayt gred ɛn tɛst am fɔ di UV ɛn di wɛda kɔndishɔn dɛn we dɛn nid.

Fɔ ɔda prɔjek dɛm, spɛsifa di ɛkspɛkt san layt ɛksplɔshɔn, tɛmpracha rɛnj, savis layf ɛn apinans rikwaymɛnt so dat dɛn go ebul fɔ evalyu wan fayn stebul gred ɔ ɔda matirial.

Kεmikכl & Mɔstɔ Rεsistεns

HIPS gεt lכw wata absכpshכn εn i kin tכlerεt sεlekt mild kεmikכl envayroment dεm, bכt in rεsistεns de vεryus bכku bay kεmikכl tכp εn opareshכn kכndishכn dεm.

If di kɔmpɔnɛnt we dɔn dɔn go kɔntakt klin, ɔyl, alkol, sɔlvɛnt ɔ ɔda kemikal, gi di kemikal nem, kɔnsɛntreshɔn, tɛmpracha ɛn di tɛm we i fɔ de bifo yu gri fɔ di matirial.

Aw fɔ Pik di Rayt HI PS shit

Us Infɔmeshɔn Yu Fɔ Gi Fɔ Kot?

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt HI PS shit

Wetin HIPS tinap fɔ?

HIPS tinap fɔ Ay Impɛkt Polistayn. I na polistayn we dɛn dɔn modify fɔ gi big taf ɛn rɛsistɛns to krak pas standad Jɛnɛral Pɔpɔz Polistayn.

Na di High Density Polystyrene na di sem wit HIPS ?

Nɔ. HIPS min Ay Impɛkt Polistayn. Di wɔd ay-dɛnsity polistayn de yuz bak na di makit fɔ sɔm dense E PS ɔ XPS fom prodak, so sɔlid HIPS sheet matirial fɔ no bay in kɔrɛkt HIPS matirial dizaynɛshɔn.

Dis prodak na E PS ɔ XPS insuleshɔn bɔd?

Nɔ. Dis prodakt na sɔlid HIPS / PS sheet matirial wit wan kɔrɛnt tiknɛs rɛnj we de lɛk 0.2mm to 6mm. I nɔto E PS ɔ XPS fom tɛmal-insuleshɔn bɔd.

Us tik tik dɛn de?

Di HSQY spɛsifikɛshɔn we de naw de kɔba lɛk 0.2mm to 6mm. Dɛn fɔ kɔnfyus di rayt we aw i de akɔdin to di wit, di kɔlɔ, di say we i de ɛn di we aw dɛn yuz am.

Wetin na di maksimal HIPS sheet matirial wit?

Di kɔrɛnt prodak infɔmeshɔn de list di wit dɛn we go rich lɛk 1600mm fɔ sɔm spɛsifikɛshɔn dɛn we dɛn dɔn pik.

Us kɔlɔ dɛn de?

Di infɔmeshɔn bɔt di prɔdak we de naw de sho wayt, blak ɛn kɔstɔmayt kɔlɔ dɛn.

Yu tink se HIPS sheet matirial kin thermoformed?

Yɛs. Tεmכfכm εn vεkyum fכm na mεjכr HIPS aplikεshכn dεm. Faynal pefɔmɛns dipen pan tik, ɔt kɔndishɔn, mold jɔyometri ɛn fɔm dip.

Yu tink se HIPS sheet matirial kin yuz fɔ pak trey dɛn ?

Yɛs. Suitabl HIPS gred dεm kin tεmכfכm insay trey dɛn , insεt εn prכtektiv pak. Rigyulayt pak aplikeshɔn dɛn nid fɔ kɔnfɔm di aplikebul matirial gred ɛn dɔkyumentri.

Yu tink se HIPS sheet matirial kin print?

Yɛs. Yu kin yuz fayn HIPS gred fɔ skrin, dijital ɛn ɔda we dɛn fɔ print. Ink adhesion, surface finish ɛn di tritmɛnt we dɛn nid fɔ tɛst bifo dɛn prodyuz.

Yu tink se HIPS sheet matirial kin bi CNC mashin?

Yɛs. HIPS kin kɔt, drɔ, rout, day kɔt ɛn CNC mashin yuz fayn tul ɛn prɔsesin kɔndishɔn.

Yu kin yuz HIPS fɔ aplayans layna?

Yɛs. Aplayans ɛn frij layna dɛn dɔn establish HIPS aplikeshɔn dairekshɔn. Eksakt suitability dipכnt pan fכm rikwaymεnt, tεmprachכ, kεmikכl, apinεns εn di mεtirial gred we dεn sεlekt.

Yu kin yuz HIPS fɔ ɔtomotiv kɔmpɔnɛnt dɛn?

Dɛn kin evalyu HIPS gred dɛn we dɛn dɔn pik fɔ nɔ-strɔkchɔral ɔtomotiv intɛriɔ aplikeshɔn dɛn. Di ɔtomotiv-spɛsifi k ɔt, impak, ɔda, ɛmishin ɛn flammabiliti rikwaymɛnt dɛn fɔ kɔnfyus bifo dɛn gri fɔ di matirial.

HIPS fayn fɔ yuz na do?

Standard HIPS na in dɛn kin yuz mɔ insay os. Fɔ ɛkstɛnd ɔdasay nid fɔ kɔnfɔm UV stebiliti, wɛda kɔndishɔn ɛn di matirial gred we dɛn dɔn pik.

Wetin na di difrɛns bitwin HIPS ɛn GPPS ?

HIPS na rɔba-modify ɛn nɔmal wan opɛk, wit big tafnɛs pas GPPS . GPPS na nכmal transparent εn glos bכt kכmparativ brit.

Us infɔmeshɔn a fɔ gi fɔ kot?

Duya gi di aplikeshɔn, tiknes, sheet matirial dimɛnshɔn, kɔlɔ, sɔfayz finish, fɔm ɔ printin rikwaymɛnt, spɛshal pefɔmɛns rikwaymɛnt, kwantiti ɛn ples fɔ go.

Pak & Delivri fɔ di wok

HIPS sheet matirial s fɔ protɛkt akɔdin to dɛn dimɛnshɔn, tik ɛn sɔfa we dɛn nid fɔ ridyus skrach, kɔntaminɛshɔn, ed damej ɛn muvmɛnt we dɛn de kip ɛn intanashɔnal transpɔt.

HSQY Plastik Grup Ɛgzibishin dɛn

Sɛtifiket dɛn & Dokumɛnt dɛn

Dɛn fɔ kɔnfyus di sɛtifiket dɛn we de ɛn di tɛknikal dɔkyumentri fɔ di rayt HIPS gred ɛn di aplikeshɔn we dɛn bin want fɔ yuz bifo dɛn gri fɔ di ɔda.