HSQY Polistayn Sheet fɔ Print

Printable HIPS Polistayn Shit fɔ Skrin ɛn Dijital Printin

HSQY printable polystyrene sheet matirial na fɔ print, sayn, pɔynt-ɔf-pɔch displei, pɔynt-ɔf-sɛl displei, advatayzmɛnt panɛl ɛn ɔda vijual kɔmyunikeshɔn aplikeshɔn dɛn. High Impact Polystyrene, we dɛn kin kɔl HIPS , de kɔba wan smol printabl sɔfays wit yusful rigiditi, laytwɛt kɔnstrɔkshɔn ɛn impɔtant impak rɛsistɛns kɔmpia wit standad jenɛral-pɔpɔs polistayn.

Printable HIPS sheet matirial na wan we dɛn pik bɔku bɔku wan fɔ skrin printin, UV dijital printin ɛn ɔda grafik aplikeshɔn usay di wan dɛn we de bay nid wan ikɔnomik rigid plastic sabstret we dɛn kin kɔt, day-kɔt, mek ɛn thermoformed bak afta dɛn dɔn print am.

HSQY naw de saplae PS ɛn HIPS sheet matirial s in tiknes frɔm 0.2mm to 6mm , wit te to 1600mm , ɛn standad wayt, blak ɛn kɔstɔmayz kɔlɔ. Surface finish, printing treatment, dimensions ɛn tolerances fɔ kɔnfɔm akɔdin to di kɔstɔma in printin prɔses ɛn finish prodak.

       Rikwest Printable HI PS shit Kot    

Printable HI PS shit Prodakt Imej dɛn

Wetin Na Printable HI PS shit ?

HIPS tinap fɔ Ay Impɛkt Polistayn. Na modifyed polistayn matirial we dɛn divɛlɔp fɔ gi big tafnɛs ɛn impak rɛsistɛns pas standad jenɛral-pɔpɔs polistayn we i de kip lɔw wet, stiffnɛs ɛn gud prɔsesin kwaliti dɛn.

Fɔ printin aplikeshɔn, HIPS gɛt valyu fɔ in rili smol ɛn kɔnsistɛns sɔfays, we de mek i yusful fɔ print sayn, rital displei, prɔmoshɔnal panɛl, shelf grafik, displei kɔmpɔnɛnt ɛn branded pak.

Di ekzak printin pefomans dipen pan sheet matirial surface finish, surface enaji, ink kemistri, printin ikwipment en pri-tritment. Di wan dɛn we de bay fɔ tɛst di aktual sheet matirial wit di ink we dɛn dɔn pik ɛn di printin prɔses bifo dɛn prodyuz bɔku bɔku wan.

Printable HI PS shit Spɛsifikeshɔn dɛn

Di we aw dɛn de print fɔ HI PS shit

Fɔ Print na Skrin

HIPS na wan we dɛn kin yuz bɔku bɔku wan as skrin-printin sabstret fɔ indo sayn dɛn, POP displei dɛn, prɔmoshɔnal grafik dɛn ɛn displei panɛl dɛn. Surface finish ɛn surface treatment fɔ mach wit di ink sistem we yu dɔn pik.

UV Dijital Printin we dɛn de print

HIPS kin evalyu fɔ dairekt UV dijital printin usay rigid sheet matirial nid fɔ shɔt- to midul-rɔn prɔmoshɔnal displei, sayn ɛn rital grafik. Ink adheshon fɔ chɛk yuz di aktual printa, ink ɛn sheet matirial sɔfays.

Wan Sayd ɛn Tu Sayd Printin

Fɔ dubl-sayd printin, di wan dɛn we de bay fɔ kɔnfɔm if ɔl tu di say dɛn gɛt di sem finish, tritmɛnt ɛn ink adheshon. Glɔs fes ɛn mat rivas fes kin nid difrɛn we fɔ print.

Laminating ɛn Lebul dɛn

Printable HIPS kin yuz bak wit laminated grafik, prɛshɔn-sɛnsitiv lɛbl ɛn dɛkɔretiv fim. Adhesive kompitibiliti fɔ evaluate akɔdin to di sheet matirial sɔfa ɛn fayn savis kɔndishɔn.

Wetin Mek Yu Yuz HI PS shit fɔ Print?

Smooth Printable Surface we yu kin print

Wan kɔnsistɛns sheet matirial sɔfays de sɔpɔt klin grafik, logo, tɛks ɛn branding fɔ indo advatayzmɛnt ɛn rital displei aplikeshɔn dɛn.

Improved Impact Resistance we dɛn dɔn mek

High Impact Polystyrene na modify fɔ gi bɛtɛ tafnɛs ɛn krak resistans pas standad jenɛral-pɔpɔs polystyrene, we mek i yusful fɔ displei ɛn fabricated pat dɛn we dɛn de handle we dɛn de instɔl ɛn yuz.

Laytwɛt ɛn Rigid

HIPS de gi yusful panɛl stiffnɛs we nɔ gɛt bɔku wet, we kin mek am izi fɔ handle, fɔ mek ɛn transpɔt fɔ big-volyum displei projɛkt.

I izi fɔ Kɔt ɛn Fabrik

HIPS sheet matirial kin pik fɔ day kɔt, saw, CNC kɔt, skɔ, drɔl ɛn ɔda fabrikeshɔn prɔses dɛn dipen pan gej, jɔyometri ɛn prodakshɔn ikwipmɛnt.

Dɛn kin mek am wit tɛmɔfɔm

Suitabl HIPS gred kin bi tεmכfכm כ vεkyum fכm afta sheet matirial εkstrushכn, we de alaw fכ print כ unprint mεtirial fכ kכnvכlt to displei, trey dɛn , insεt εn tri-dimεnshכnal kכmכpכnt.

I nɔ go tek bɔku mɔni fɔ Print we gɛt Ay Volyum

HIPS na tin we dɛn kin tink bɔt usay pipul dɛn we de bay nid wan rigid printabl plastic sabstret fɔ volyum POP, sayn ɛn prɔmoshɔnal kampen dɛn we dɛn nɔ muf to mɔ dia dia injinɛri plastic.

Aplikeshɔn dɛn fɔ Printable HI PS shit

Point-of-Purchase Display dɛn we yu kin bay

Printable HIPS sheet matirial fayn fɔ prɔmoshɔnal displei panɛl, kɔnta displei, shelf displei ɛn ɔda POP kɔmpɔnɛnt dɛn we dɛn kin yuz na rital stɔ dɛn.

Displei dɛn we dɛn kin sho na di say we dɛn de sɛl

HIPS kin print ɛn mek am insay POS grafik, prayz bɔd, prodak displei panɛl ɛn shɔt tɛm prɔmoshɔnal matirial.

Sayn dɛn we de insay os

Di rigid ɛn printabl sɔfays de mek HIPS fayn fɔ indo dairekshɔn sayn, rital sayn, prɔmoshɔnal bod, mɛnyu grafik ɛn ɛgzibishin panɛl.

Shelf Tɔk ɛn Ritayl Grafik

Tin HIPS sheet matirial kin chenj to shelf tok, hεda kad, prכmoshכnal strip εn כda laytwεt rital grafik.

Ɛgzibishin ɛn Tred Sho Panɛl dɛn

Print HIPS panɛl dɛn kin yuz fɔ tɛmporari ɛgzibishin grafik, displei strɔkchɔ, branded panɛl ɛn prɔmoshɔnal instɔleshɔn.

Di Komponent dɛn fɔ Pak we Dɛn Print

HIPS kin yuz bak fɔ print pak kɔmpɔnɛnt dɛn, protɛktiv insɛt, tɛmɔfɔm trey dɛn ɛn branded fɔm pat dɛn we di gred we dɛn pik mit di mɛkanikal ɛn aplikeshɔn rikwaymɛnt dɛn.

Mɔdal Mek ɛn Protɔtayp

Tin HIPS sheet matirial izi fɔ kɔt, shep ɛn mek, we mek i yusful fɔ mɔdel, protɔtayp, tɛmplat ɛn dizayn mɔk-ap.

HI PS shit I fayn fɔ Print na do?

Standard HIPS sheet matirial na in dɛn kin pik fɔs fɔ indo printin, POP displei ɛn sayn. If yu de na do kin gɛt fɔ du wit UV raytin, tɛmpracha sayklɔs, mɔstɔ ɛn wɛda we kin afɛkt di kɔlɔ, di kɔndishɔn na di say we yu de ɛn di mɛkanikal prɔpati dɛn.

If di prodak we dɔn dɔn go instɔl na do, gi di ɔda savis tɛm we dɛn nid ɛn di envayrɔmɛnt kɔndishɔn so dat dɛn go ebul fɔ evaluate wan aprɔpriet UV-stabilized gred ɔ ɔda sheet matirial matirial.

HIPS vs. GPPS fɔ Printin Aplikeshɔn dɛn

Aw fɔ Pik HI PS shit fɔ Print

1. Kɔnfɛm di we aw yu de print

Tɛl HSQY if di sheet matirial go bi skrin print, UV dijital print, lamin, lɛbul ɔ prosɛs bay ɔda we.

2. Pik di Surface Finish we yu nid

Mat ɛn glos sɔfays dɛn kin mek difrɛn tin dɛn we pɔsin kin si ɛn dɛn kin biev difrɛn we we dɛn de put ink. Spɛsifik if wan ɔ ɔl tu di say dɛn nid fɔ gɛt wan patikyula finish.

3. Kɔnfɔm Surface Tritmɛnt

We printin nid fɔ gɛt minim sɔfa-ɛnaji lɛvɛl ɔ korona tritmɛnt, inklud da rikwaymɛnt de insay di spɛsifikɛshɔn fɔ bay pas fɔ tek am se ɔl sheet matirial s gɛt di sem tritmɛnt.

4. Pik di Kɔrɛkt Tik

Tin sheet matirial yusful fɔ laytwɛt grafik ɛn fɔm pat dɛn, we tik sheet matirial de gi big panɛl rigiditi fɔ big sayn dɛn, bak panɛl dɛn ɛn fabricated displei kɔmpɔnɛnt dɛn.

5. Spɛsifik di Shit Sayz ɔ Rol Rikwaymɛnt

HSQY naw de list widths op to 1600mm. Gi di finish sheet matirial dimɛnshɔn, kɔt layout ɛn kwantiti fɔ ridyus matirial west we dɛn de print ɛn kɔnvɔyt.

6. Kɔnfɔm Kɔlɔ ɛn Opasiti

Wait ɛn blak na di standad opshɔn dɛn we de naw. Di kɔstɔm kɔlɔ we dɛn nid fɔ gɛt fɔ gɛt fizik rɛfrɛns, kɔlɔ kɔd ɔ apruv sampul usay dɛn nid fɔ mek di kɔlɔ mach kɔrɛkt wan.

7. Kɔnfɔm Pɔst-Printin Fabrikeshɔn

Spɛsifik if di print sheet matirial go leta day-kat, fold, drɔl, CNC kɔt, laminated, glu, vaykum fɔm ɔ tɛmfɔm so dat dɛn go ebul fɔ evaluate wan fayn sheet matirial spɛsifikɛshɔn.

Printing Tests Bayers Fɔ Kɔnfɔm

• Ink Adhesion: Test di aktual ink sistem pan di prodakshɔn sheet matirial .

• Surface Energy: Kɔnfɔm di tritmɛnt lɛvɛl we yu nid fɔ di printin prɔses we yu dɔn pik.

• Surface Finish: Spɛsifik mat, glos ɔ prɔjek-spɛsifi k finish.

• Kɔlɔ Kɔnsistɛns: Kɔnfɛm akseptabl kɔlɔ rɛnj fɔ wayt, blak ɔ kɔstɔm kɔlɔ dɛn.

• Tiknɛs Tolɛreshɔn: Impɔtant fɔ print, fid, kɔt ɛn fɔm kɔnsistɛns.

• Flatnes: Evaluate sheet matirial flatnes fɔ ɔtomatik printin ɛn fidin ikwipmɛnt.

• Statik Kɔntrol: Tɔk bɔt statik rikwaymɛnt usay dɔst atrak ɔ fidin prɔblɛm de afɛkt printin.

• Post-Print Fabrication: Kɔnfɛm se printin stil akseptabl afta yu dɔn kɔt, bɛn ɔ thermoforming.

Kastom HI PS shit Opshɔn dɛn

• Kastom tiknes frɔm 0.2mm to 6mm

• Kastom widths op to 1600mm

• Kastom sheet matirial lɔng

• Wait, blak ɛn kɔstɔm kɔlɔ dɛn

• Surface-finish rikwaymɛnt dɛn

• Di tin dɛn we dɛn nid fɔ print-trit

• Kɔt-to-sayz sheet matirial kɔnvɔshɔn

• Tεrmoforming-grεd sεlεkshכn

• Protektiv film rikwaymɛnt dɛn

• Kastomized palet ɛn ɛkspɔt pak

Infɔmeshɔn Nid fɔ Wan Printable HI PS shit Quote

Fɔ gɛt kot we go fast ɛn kɔrɛkt, duya gi:

• PS ɔ HIPS matirial rikwaymɛnt

• Tik we dɛn nid

• Shit wit ɛn lɔng

• Wait, blak ɔ kɔstɔm kɔlɔ

• Rikwayd surface finish

• Printin we gɛt wan ɔ tu sayd

• Skrin, UV dijital ɔ ɔda printin prɔses

• Ink sistem ɔ sɔfa-tritmɛnt rikwaymɛnt

• Post-print kɔt ɔ thermoforming prɔses

• Tiknɛs ɛn dimɛnshɔnal tolɛreshɔn dɛn

• Protektiv film rikwaymɛnt

• Kwantiti we dɛn nid ɔ fɔ it ɛvri ia

• Dokumɛnt we dɛn nid fɔ rayt

• Di kɔntri we dɛn de go ɛn di pɔt

       Get Printable HI PS shit Prays    

Pakɛj ɛn Delivri

Sampul Pak: Dɛn kin protɛkt sampl wit fayn film ɔ katon pak fɔ ridyus skrach, kɔntaminɛshɔn ɛn ed damej we dɛn de transpɔt.

Bɔlk Pakɛj: Kɔmɛshɔnal sheet matirial s dɛn de stak ɛn protɛkt fɔ bɔlk shipmɛnt akɔdin to sheet matirial dimɛnshɔn, tik ɛn transpɔt rikwaymɛnt.

Palet Packaging: Dɛn kin arenj fɔ ɛkspɔt palet ɛn strɛch-film protɛkshɔn akɔdin to wetin di kɔstɔma nid.

Kɔntinɛnt Lod: Lod kɔnfigyushɔn kin ɔptimayz akɔdin to sheet matirial dimɛnshɔn, palet saiz ɛn 20ft ɔ 40ft kɔntena rikwaymɛnt.

Dilivri Tɛm: FOB, CIF ɛn EXW na kɔmɛshɔnal opshɔn dɛn we dɛn dɔn list naw.

Rifrɛns Lid Taym: Na lɛk 7–15 dez afta dɛn dɔn put di mɔni, we de ɔnda sheet matirial spɛsifikɛshɔn, kɔstɔm kɔlɔ, kwantiti ɛn prodakshɔn schedule.

Kwaliti ɛn Dokumɛnt

Di kɔrɛnt prodak infɔmeshɔn de rɛfrɛns SGS ɛn ISO 9001:2008 dɔkyumentri. Di wan dɛn we de bay fɔ aks fɔ sɛtifiket dɛn we dɛn de yuz naw, tɛknikal data sheet matirial s ɛn inspekshɔn dɔkyumentri fɔ di ɛksaktɔl matirial gred we dɛn de bay.

Wan kwaliti-mɛnejmɛnt-sistim sɛtifiket nɔ fɔ bi pruf fɔ ɛvri prɔdak-spɛsifi k pefɔmɛns klem. Print, impak, it-kɔntakt, kemikal-rɛsistɛns ɔ ɔda aplikeshɔn rikwaymɛnt dɛn fɔ kɔnfɔm yuz di rilevɛns matirial spɛsifikɛshɔn ɔ tɛst ripɔt.

HSQY Intanɛshɔnal Ɛgzibishin

HSQY de tek pat pan intanashɔnal plastic ɛn pak ɛgzibishin fɔ mit distribyushɔn, printin kɔmni, tɛmɔfɔm manifakta ɛn ɔda industrial bayer dɛn.

FAQ Bɔt HI we dɛn kin print PS shit

Wetin na tin we pɔsin kin print HIPS sheet matirial ?

Printable HIPS sheet matirial na ay impak polistayn sheet matirial wit wan sɔfays we fayn fɔ grafik, sayn, displei ɛn ɔda printin aplikeshɔn dɛn. HIPS de kɔba rigiditi, layt wet, impak rɛsistɛns ɛn gud fabrikeshɔn pefɔmɛns.

Yu tink se HIPS sheet matirial kin print na skrin?

Yɛs. HIPS na tin we dɛn kin yuz fɔ POP displei dɛn we dɛn print na skrin, sayn dɛn we dɛn kin put insay os ɛn fɔ advatayz panɛl dɛn. di ink we yu pik fכ tεst fכ adheshon to di aktual sheet matirial surface.

Yu tink se HIPS sheet matirial kin bi UV dijital print?

HIPS kin yuz fɔ UV dijital printin we di ink, sɔfayz finish ɛn tritmɛnt kɔmpitabl. I fayn fɔ mek dɛn du prodakshɔn print tɛst bifo dɛn ɔda bɔku bɔku tin dɛn.

Us tiknes fɔ printabl HIPS sheet matirial de?

Di HSQY prodak spesifikeshɔn we de naw de list tiknes frɔm 0.2mm to 6mm, wit kɔstɔm tiknes we de akɔdin to printin, rigiditi ɛn fabrikeshɔn rikwaymɛnt.

Wetin na di maksimal HIPS sheet matirial wit?

HSQY naw de list widths op to 1600mm. Eksakt wit we de de dipen pan tik, kɔlɔ, gred ɛn ɔda spɛsifikɛshɔn.

Us kɔlɔ dɛn de?

Wait ɛn blak na di kɔlɔ dɛn we dɛn dɔn list naw. Dɛn kin tɔk bɔt di kɔlɔ dɛn we dɛn kɔstɔmayt akɔdin to di kwantiti ɛn di we aw dɛn kin mek di tin dɛn.

Yu tink se mat ɔ glos HIPS de?

Surface finish fɔ spɛsifa we yu de aks fɔ kot. Baya dɛn we nid mat, glos ɔ difrɛn finish na ɛni say fɔ gi di rayt printin ɛn apinans we dɛn nid fɔ kɔnfɔm.

HIPS nid korona tritmɛnt fɔ print?

Di tin dɛn we dɛn nid fɔ trit dipen pan di we aw dɛn de print ɛn di ink sistem. If yu printa spɛsifa wan minimum dayn lɛvɛl ɔ korona-trit sɔfays, put am insay di tɛknikal spɛsifikɛshɔn.

Wetin na di difrɛns bitwin HIPS ɛn standad PS sheet matirial ?

HIPS na modify fɔ impɔtant impak rɛsistɛns ɛn tafnɛs. Standard jenerol-purpose polystyrene na tipikli had en mo brittle. HIPS na so dɛn kin pik am usay di sheet matirial go print, kɔt, mek ɔ thermoformed.

Yu tink se dɛn kin print HIPS sheet matirial we dɛn kin mek wit tɛmɔfɔm?

Suitabl HIPS gred dεm kin tεmכfכm εn vεkyum fכm. Fɔm dip, sheet matirial tiknes, ɔt kɔndishɔn ɛn print sɔfays rikwaymɛnt fɔ ɛvaluet bifo kɔmɛshɔnal prodakshɔn.

Yu kin yuz HIPS sheet matirial fɔ POP ɛn POS displei?

Yɛs. POP ɛn POS displei na kɔmɔn aplikeshɔn bikɔs HIPS na tin we pɔsin kin print, layt, rigid, izi fɔ mek ɛn i nɔ gɛt mɔni fɔ prɔmoshɔnal kampen.

Yu tink se standad HIPS sheet matirial fit fɔ sayn na do?

Standard HIPS na wan we dɛn kin jɔs pik fɔ indo aplikeshɔn dɛn. Yu fɔ yuz am na do fɔ jɔs spɛsifa afta dɛn dɔn kɔnfyus di UV stebiliti, wɛda ɛksplɔshɔn ɛn savis-layf rikwaymɛnt fɔ di ɛksaktɔ gred.

HSQY kin kɔstɔmayz HIPS sheet matirial saiz dɛn?

Yɛs. HSQY kin tɔk bɔt kɔstɔm tik, wit, sheet matirial lɔng, kɔlɔ, sɔfayz finish ɛn pak akɔdin to ɛkstrushɔn kapabiliti ɛn prɔjek volyum.

Wetin na di MOQ fɔ printabl HIPS sheet matirial ?

Di MOQ we dɛn se naw na 1000kg. Sampul ɔ trayal avaylabl dipen pan stok, tik, saiz, kɔlɔ ɛn di sɔfa spɛsifikɛshɔn we dɛn nid.

Us infɔmeshɔn a fɔ gi fɔ kot?

Gi di matirial gred, tiknes, sheet matirial dimɛnshɔn, kɔlɔ, sɔfa finish, printin we, sɔfa-tritmɛnt rikwaymɛnt, post-print fabrikeshɔn prɔses, kwantiti ɛn dɛstineshɔn makɛt.

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae PS , HIPS ɛn ɔda plastic sheet matirial matirial fɔ printin kɔmni dɛn, sayn manifakta dɛn, POP displei prodyusɔ dɛn, thermoforming faktri dɛn, pak manifakta dɛn ɛn industrial B2B kɔstɔma dɛn.

HSQY kin sɔpɔt kɔstɔm sheet matirial tik, wit, kɔlɔ, sɔfa rikwaymɛnt, kɔnvɔyt, sampul, pak ɛn intanashɔnal bɔlk saplai akɔdin to di prɔjek spɛsifikɛshɔn dɛn.

Send yu sheet matirial dimɛnshɔn, printin we, surface-finish rikwaymɛnt, ɛni ia volyum ɛn finish aplikeshɔn fɔ tɔk bɔt wan fayn printabl HIPS sheet matirial spɛsifikɛshɔn.

       Get Printable HI PS shit Kot & Sampul dɛn