Polikabɔnɛt sawndpruf sheet

Polycarbonate Soundproof Sheet fɔ Transparent Nɔys Barɛri dɛn

Polikabɔnɛt sawndpruf shit na transparent ɔ kɔlɔ sɔlid PC shit we dɛn kin yuz as di akostik ɛlimɛnt na haywe, relwe, mɛtro, brij, tanɛl ɛn industrial nɔys barɛri sistem. I de ɛp fɔ ridyus di transmishɔn fɔ trafik ɛn mashin dɛn nɔys we i de kip di visibiliti, de layt ɛn di akitɔkchɔral apinɛns we de rawnd.

HSQY de saplae polikabɔnɛt sawnd barɛri shit dɛn we gɛt kɔmɔn tiknes we na 6mm, 8mm, 10mm ɛn 12mm. Klia, lek blu, grɛn, brɔnz ɛn kɔstɔmayt kɔlɔ dɛn de fɔ infrastukchɔ kɔntrakta dɛn, nɔys barɛri manifakta dɛn, injinɛri kɔmni dɛn, distribyushɔn ɛn industrial ɛnklɔz projɛkt dɛn.

dipכnt pan di tiknes we dεn sεlekt εn di tεst kכndishכn dεm, HSQY sכlid polycarbonate sawnd insulεshכn shit dεm kin gi aprכksimatli 29–34dB כf rεfrεns sawnd rεdukshכn. Faynal akostik pefɔmɛns dipen pan di kɔmplit barɛri ayt, panɛl dimɛnshɔn, sɔpɔtin freym, sil, jɔyn, instɔleshɔn we ɛn aplikebul tɛst standad.

       Rikwest Sampl ɛn Projɛkt Prayz    

Polikarbonɛt sawnd barɛri sheet prodakt rɛnj

HSQY de gi sɔm polycarbonate sheet strɔkchɔ fɔ transparent nɔys barɛri, industrial sawnd ɛnklɔzhɔ ɛn akitekchral sawnd insuleshɔn projɛkt.

• Solid Polycarbonate Soundproof Sheet fɔ di haiwe, relwe, metro ɛn ɔban rod nɔys barɛri.

• Embossed Polycarbonate Soundproof Sheet fɔ prɔjek dɛn we nid fɔ gɛt tɛkstɔr sɔfays, vijual prayvet pat ɔ dɛkɔretiv apinans.

• Dabl-Wal Polikabɔnɛt Saund Insuleshɔn Shit fɔ laytwɛt patishɔn, ruf strɔkchɔ ɛn sɛlɛkɛt akostik ɛnklɔzhɔ aplikeshɔn dɛn.

• Polikabɔnɛt Saund Insuleshɔn Patishɔn Shit fɔ industrial, akitekchral ɛn kɔmɛshɔnal patishɔn sistem dɛn.

Sɔlid, ɛmbos ɛn olo polikabɔnɛt shit dɛn nɔ de gi di sem akostik pefɔmɛns ɔtomɛtik wan. Di kɔrɛkt strɔkchɔ fɔ pik akɔdin to di nɔys sɔs, target sawnd ridɔkshɔn, span, briz lod, framing sistɛm ɛn transparency we dɛn nid.

Tipik Polikabɔnɛt Saundpruf Shit Spɛsifikeshɔn dɛn

Di tebul we de dɔŋ ya de diskrayb di tipik HSQY prodak rɛnj. Faynal dimɛnshɔn, tolɛreshɔn, akostik valyu, kɔtin ɛn kɔmplians dɔkyumɛnt fɔ kɔnfɔm fɔ di prodak gred we yu dɔn pik bifo yu ɔda.

Polikabɔnɛt Shit Tiknɛs ɛn Saund Ridyushɔn

we yu inkrεs di mas εn tiknes fכ wan sכlid polikabכnayt panεl jεnarali de impruv in abiliti fכ ridyus di sawnd transmishכn we de kכmכt na di ays. Bɔt dɛn nɔ kin ebul fɔ tɔk di rizɔlt we dɛn dɔn instɔl frɔm di tik we i tik nɔmɔ.

Di valyu dɛn we de ɔp na prodak rɛfrɛns data pas fɔ bi garanti fɔ ɛvri prɔjek we dɛn dɔn dɔn. Akɔstik pefɔmɛns fɔ kɔnfɔm yuz di tɛst we dɛn gri pan, panɛl dimɛnshɔn, freym sistɛm ɛn instɔleshɔn kɔnfigyushɔn.

Saund Insuleshɔn, Saund Absɔpshɔn ɛn Nɔys Ridɔkshɔn

Di wɔd dɛn we dɛn kɔl sawnd insuleshɔn, sawnd absɔpshɔn ɛn sawndpruf de tɔk bɔt difrɛn akostik wok dɛn. Dɛn nɔ fɔ yuz dɛn wan bay wan we dɛn de spɛsifa wan polikabɔnɛt nɔys barɛri.

Wetin Na Saund Insuleshɔn?

Saund insuleshɔn de tɔk bɔt di ebul we panɛl ɔ bildin ɛlimɛnt ebul fɔ ridyus sawnd transmishɔn frɔm wan say to di ɔda say. Sɔlid polikabɔnɛt shit dɛn kin wok fɔs as riflɛkɛtiv sawnd insuleshɔn panɛl dɛn na transparent nɔys barɛri sistɛm dɛn.

Wetin Na Saund Absorption?

Saund absorption de diskraib aw bɔku akostik ɛnaji we wan matirial de absɔb instead fɔ riflɛkɛt. Porous akostik panɛl ɛn minral-ful sistɛm dɛn kin yuz fɔ absɔpshɔn. Wan smol sɔlid PC sheet nɔ fɔ ɔtomɛtik diskrayb as ay-absɔpshɔn matirial.

Na NRC na di Kɔrɛkt Raytin fɔ Polikabɔnɛt Saund Barɛri?

NRC de mɛzhɔ sawnd absɔpshɔn ɛn i nɔ di sem wit sawnd insuleshɔn rɛytin we de na di ays. Transparent rod ɛn relwe barɛri projɛkt dɛn kin insted spɛsifa mɛtrik dɛn lɛk DLR, Rw, STC ɔ frikshɔn-spɛsifi k transmishɔn lɔs, dipen pan di kɔntri ɛn aplikeshɔn.

Yu tink se Polikabɔnɛt Shit Go Mek Ɛria Nɔ Gɛt Sawnd Kɔmplit?

No wan sheet nɔ go ebul fɔ mek wan say we opin nɔ gɛt sawnd atɔl. Wan nɔys barɛri de ridyus dairekt sawnd transmishɔn, bɔt sawnd kin stil travul oba di tap, rawnd di ɛnd dɛn, tru opin ɛn tru ɔda strɔkchɔral kɔmpɔnɛnt dɛn.

Akostik Raytin ɛn Tɛst Stɛndad

Di projɛkt spɛsifikɛshɔn dɛn fɔ tɔk ɔl tu di akostik valyu we dɛn nid ɛn di tɛst standad. Wan nɔmba we nɔ gɛt tɛst we nɔ fayn fɔ kɔmpia prɔdak dɛn frɔm difrɛn saplay dɛn.

Di wan dɛn we de bay fɔ kɔnfɔm if di prɔjek nid fɔ gɛt tɛst ripɔt fɔ di wan wan shit, panɛl we gɛt freym ɔ di kɔmplit nɔys barɛri sistem we dɛn dɔn instɔl.

Ki Bɛnifit dɛn fɔ Polikabɔnɛt Nɔys Barɛri Shit dɛn

• Transparent sawnd insuleshɔn: I de ɛp fɔ ridyus di nɔys transmishɔn we nɔ de blok di we aw pɔsin de si, di de layt ɔ di land we de rawnd am kpatakpata.

• Ay impak resistans: I fayn fɔ ples dɛn we de na di dɔti, aksidɛntal impak, vandalism ɛn dimand transpɔt ɛnvayrɔmɛnt.

• Lɔwa strɔkchɔral wet: Layt pas kɔvɛnshɔnal glas panɛl dɛn we gɛt kɔmparabl dimɛnshɔn, we de ɛp fɔ ridyus di hanlin ɛn sɔpɔt-strɔkchɔ lod.

• Di weta we de na do: Dɛn kin spɛsifa gred dɛn we dɛn dɔn protɛkt wit UV fɔ lɔng tɛm we pɔsin de na di san, ren, sno, briz ɛn tɛmpracha chenj.

• Kla fleksibiliti: Klia, blu, grɛn, brɔnz ɛn kɔstɔm-kɔlɔ sheet dɛn kin sɔpɔt akitekchral ɛn ɔban dizayn rikwaymɛnt dɛn.

• Dizayn fleksibiliti: Dɛn kin kɔt, drɔl polikabɔnɛt shit dɛn, kol bɛnt ɔ thermoformed to flat ɛn kɔba nɔys barɛri dizayn.

• Opshɔnal sɔfayz protɛkshɔn: Dɛn kin ebul fɔ evalyu sɔfays opshɔn dɛn we nɔ de abrashɔn, we nɔ de grafiti ɛn we izi fɔ klin fɔ pɔblik infrastukchɔ.

• Projek kɔstɔmayshɔn: Dɛn kin ajɔst di sheet saiz, tik, kɔlɔ, sɔfa, mak ɛn pak akɔdin to wetin injinɛri nid.

Aplikeshɔn fɔ Polikabɔnɛt Sɔndpruf Shit dɛn

Haywe ɛn Ɛkspɛs We Nɔys Barɛri dɛn

Dɛn kin instɔl transparent polikabɔnɛt shit dɛn as akostik ɛlimɛnt dɛn na di aywe ɛn ɛkspɛswe sawnd wɔl dɛn. Dɛn de ɛp fɔ protɛkt di say dɛn we pipul dɛn de liv, kɔmɛshɔn ɛn pɔblik eria dɛn we de nia de ɛn dɛn de mek di drayva dɛn si am ɛn ridyus di mas we di barɛri de si.

Relwe ɛn Ay-Spid Rel Nɔys Barɛri dɛn

Tik sɔlid PC sawnd barɛri shit dɛn kin yuz along relwe layn, ay-spid rel sistem ɛn relwe brij usay akostik pefɔmɛns, impak rɛsistɛns, briz prɛshɔn ɛn lɔng tɛm ɔdasay we nid fɔ de.

Metro ɛn Ɔban Ɛlevɛt Rod Barɛri dɛn

Dɛn kin intagret klia ɛn tint polikabɔnɛt panɛl dɛn insay di ɔban mɛtro layn dɛn ɛn ɛlevɛt rod usay dɛn fɔ balans di nɔys mitigashɔn wit natura layt, siti we yu de si ɛn di akitɔkchral apinɛns.

Brij ɛn Tɛnal Nɔys Ɛnklɔzhɔ

Layt wet transparent panɛl dɛn fayn fɔ pat pan tanɛl kɔva, brij barɛri ɛn trafik kɔridɔ we dɛn lɔk usay fɔ ridyus strɔkchɔral wet ɛn fɔ kip de layt impɔtant.

Indastrial Mashin Saund Enklɔzhɔ

Sɔlid PC shit dɛn kin mek insay transparent panɛl fɔ mashin ɛnklɔzhɔ, faktri patishɔn, kɔmpreshɔn rum, jenɛra kɔva ɛn prodakshɔn-layn nɔys-kɔntrol sistem.

Stadiɔm, Aypɔt ɛn Pɔblik Infrastrakcha

Dɛn kin tink bɔt polikabɔnɛt akostik panɛl fɔ di aypɔt fasiliti, di stediɔm bɔda, bɔs steshɔn, transpɔt hab ɛn ɔda pɔblik eria dɛn we nid fɔ gɛt kɔmbaynshɔn fɔ visibiliti, sef ɛn nɔys kɔntrol.

Akitekchral Patishɔn ɛn Sɛkɔndari Glazing

Dɛn kin put polikabɔnɛt shit dɛn bak insay ɔfis patishɔn, wokshɔp divayda, balkɔn ɛn sɛkɔndari glazing sistem. Di akostik rizulyt dipen pan di komplit freym, sil, eriya spes ɛn di kɔnstrɔkshɔn we de rawnd.

Sɔlid, Ɛmbos ɛn Maltiwɔl Polikabɔnɛt Shit dɛn

Solid Polikarbonɛt Saund Barɛri Sheet

Sɔlid polycarbonate sheet de kɔba mas, transparency ɛn impak rɛsistɛns. Na jɔs di praymar opshɔn fɔ transparent haywe, relwe ɛn infrastukchɔ sawnd barɛri panɛl dɛn.

Embossed Polikabɔnɛt Saundpruf Sheet

Ɛmbos sheet dɛn de gi wan tɛkstɔr apinans we kin ridyus dairekt visibiliti, difyuz layt ɛn impruv dɛkɔretiv pefɔmɛns. Akostik valyu dɛn fɔ kɔnfyus fɔ di ɛksaktɔl ɛmbos strɔkchɔ ɛn tiknɛs.

Multiwall Polikabɔnɛt Shit

Multiwall sheet dɛn gɛt intanɛnt ay chɛmba dɛn ɛn dɛn de gi lɔwa wet ɛn impɔtant tɛmal insuleshɔn. Dɛn kin fayn fɔ patishɔn, kanopi ɛn sɔm ɛnklɔzhɔ, bɔt dɛn nɔ fɔ tek am se dɛn go gi di sem impak, lod ɔ akostik pefɔmɛns lɛk sɔlid panɛl we gɛt ikwal tik.

Dabl-Layer Polikabɔnɛt Sistɛm dɛn

Tu difrɛn sɔlid polikabɔnɛt shit dɛn we gɛt dizayn fɔ ay gap kin gi ay sawnd insuleshɔn pas wan shit. Di spays, panɛl tiknes, freym kɔnɛkshɔn ɛn ɛya silin fɔ bi ɛnjinɛri as wan kɔmplit asɛmbli.

Aw fɔ Pik wan Polikabɔnɛt Nɔys Barɛri Shit

1. No di Nɔys Sɔs

Tɔk if di prɔjek na fɔ kɔntrol rod trafik, relwe, plen, industrial mashin, kɔmpreshɔn, jenɛra ɔ ɔda nɔys. Difrɛn sɔs dɛn gɛt difrɛn frikshɔn rɛnj ɛn dɛn nid difrɛn barɛri dizayn.

2. Difayn di Akɔstik Raytin we dɛn nid

Stet di target DLR, Rw, STC, OITC ɔ frikshɔn-spɛsifi k transmishɔn lɔs ɛn di tɛst standad we dɛn nid. Nɔ spɛsifa jɔs wan jenɛral frayz lɛk 'high soundproof performance.'

3. Pik di Kɔrɛkt Tik

Tiknɛs de inflɔws akostik pefɔmɛns, impak rɛsistɛns, panɛl stiffnɛs, wet ɛn alawable span. Di las chukchuk fɔ bi bays pan akostik ɛn strɔkchɔral kɔlkyulɛshɔn pas fɔ ridyus sawnd nɔmɔ.

4. Kalkul Wind Lod ɛn Panel Span

Gi di instɔleshɔn ayt, panɛl dimɛnshɔn, sɔpɔt spɛshal, lokal dizayn briz spid, sno lod ɛn ɔda strɔkchɔral rikwaymɛnt dɛn. Di brij dɛn we dɛn kin mek na di aywe ɛn di aywe rel prɔjek dɛn kin nid fɔ mek dɛn kɔlkul mɔ ditayli.

5. Kɔnfɔm Ɔda UV Ɛksplɔshɔn

Fɔ instɔleshɔn dɛn na do, sho if wan ɔ ɔl tu di say dɛn go de na di san layt. Kכv barεri, riflεktiv envayroment εn transparent enklozכr kin nid UV protεkshכn na di tu say dεm.

6. Pik di Transparency ɛn Kɔlɔ we yu nid

Klia sheet dɛn kin mek pɔsin ebul fɔ si am fayn fayn wan, ɛn tint sheet dɛn kin ridyus di glare ɛn sɔpɔt akitɔkchral dizayn. Kɔlɔ, tik ɛn sɔfayz tɛkstɔr de inflɔws layt transmishɔn ɛn di we aw pɔsin de si.

7. Evaluate Abrasion ɛn Graffiti Ɛksplɔshɔn

Pɔblik infrastukchɔ kin de fɔ klin bɔku tɛm, dɔst, san, pwɛl pwɛl ɛn grafiti. Wan abrasion-resistant ɔ anti-graffiti surface fɔ tink bɔt we dɛn nid fɔ gɛt lɔng tɛm optik klia.

8. Tink bɔt aw fɔ protɛkt di bɔd ɛn kɔlishin

I nɔ kin izi fɔ mek bɔd dɛn no di tin dɛn we kin mek dɛn nɔ ebul fɔ si. Dɛn kin put layn dɛn we dɛn print, dɔt ɔ ɔda patɛn dɛn we pɔsin kin si usay di prɔjek ɔ di lokal envayrɔmɛnt rigyuleshɔn dɛn se fɔ mek bɔd dɛn nɔ rɔsh.

9. Kɔnfɔm Faya ɛn Sefty Rikwaymɛnt dɛn

Tɔk bɔt di klas we dɛn nid fɔ mek di faya, smok, relwe, rod sef ɔ bildin klas. Dɛn fɔ chɛk if dɛn fala di lɔ bay we dɛn yuz ripɔt fɔ di ɛksaktɔl sheet gred ɛn tik pas fɔ yuz wan jenɛral stetmɛnt bɔt polikabɔnɛt.

10. Test Samples Bifo dɛn Aprɔval di Projɛkt

Dɛn kin yuz sampul fɔ evaluate kɔlɔ, layt transmishɔn, surface finish, impak rispɔns ɛn fabrication. Akɔstik ɛn strɔkchɔral aprɔval fɔ abop pan di rayt tɛst ripɔt ɛn prɔjek injinɛri.

Polikarbonɛt vs Akrilik ɛn Glas Nɔys Barɛri

Matirial sɛlɛkshɔn fɔ bi bays pan akostik pefɔmɛns we dɛn dɔn tɛst, impak risk, strɔkchɔral dizayn, optik rikwaymɛnt, envayrɔmɛnt ɛksplɔshɔn ɛn layfsaykl mentenɛns pas matirial nem nɔmɔ.

Instɔlɛshɔn Gaydlain fɔ Polikabɔnɛt Saund Barɛri

Mentɛn wan Kɔntinyu Baria

Opin joyn dεm, gap dεm we de rawnd post dεm εn panεl ed dεm we nכ sial kin ridyus di pεrformεns fכ wan sawnd barεri bכku bכku wan. Dɛn fɔ mek di kɔnɛkshɔn dɛn fɔ mek di sawnd nɔ lik dairekt wan.

Alaw fɔ Tɛmral Ɛkspɛnshɔn

Polikabɔnɛt de bɔku ɛn kɔntrakt wit di tɛmpracha. Fram, ol, gasket ɛn panɛl ɛnjɔymɛnt fɔ alaw fɔ muv we nɔ gɛt bɔku strɛs, bɔkul ɔ ed damej.

Yuz Kɔmpatibl Gasket ɛn Silan

Gasket, sial ɛn klin fɔ gɛt kemikal kɔmpitabl wit polikabɔnɛt. Matirial dɛn we nɔ kɔmpitabl kin mek di surface damej, strɛs krak ɔ lɔs transparency.

Avɔyd fɔ Prɛshɔn pasmak na di Fastener

Mɛkanikal fastɛns dɛn nɔ fɔ klem di shit tayt so dat i nɔ go mek i nɔ muv wit wam. Di dimɛnshɔn fɔ di ol, di edj distans ɛn di ditel dɛn fɔ fiks fɔ fala di injinɛri drɔin we dɛn dɔn gri fɔ.

Kɔnfɔm di Sayd we UV-Protɛkt

Wan-sayd UV sheet dɛn fɔ instɔl wit di say we dɛn protɛkt we de fes di praymari san layt. Tu-sayd UV protɛkshɔn fɔ spɛsifa we ɔl tu di say dɛn kin gɛt dairekt ɔ riflɛkt san layt.

Rimov Protɛktiv Film na di Kɔrɛkt Stej

Protɛktiv mask fɔ de insay di ples we dɛn de mek ɛn handle nɔmal bɔt dɛn fɔ pul am afta dɛn dɔn instɔl am akɔdin to di spɔlayt in instrɔkshɔn dɛn. If yu de na di san fɔ lɔng tɛm, dat kin mek i nɔ izi fɔ pul di mask.

Klin ɛn Mentɛnans

• Yuz klin wata, sop we nɔ gɛt wan bɔt ɛn wan saf klos we nɔ de abrayd.

• Rinse sand ɛn dɔst we dɔn lɔs bifo yu was di panɛl.

• Nɔ yuz brɔsh we de abrayd, mɛtal tul ɔ we fɔ was am dray.

• Kɔnfɛm se grafiti rimov ɛn sɔlvɛnt dɛn kɔmpitabl wit di sheet ɔ kɔtin we yu dɔn pik.

• Inspek panɛl ed, gasket, fastɛns ɛn freym dɛn we dɛn de du rutin mentenɛns.

• Riples di sil dɛn we dɔn pwɛl fɔ mek di akostik nɔ lik ɛn wata nɔ go insay.

• Fɔ fala di patikyula klin gayd we dɛn gi fɔ di gred dɛn we dɛn kɔt ɔ anti-grafiti.

Kwaliti Inspekshɔn ɛn Projɛkt Dokumɛnt

Di inspekshɔn ɛn dɔkyumɛnt pakej fɔ gri bifo dɛn prodyuz, mɔ fɔ gɔvmɛnt infrastukchɔ, relwe, brij ɛn big-big injinɛri prɔjek dɛm.

• Dimenshɔn ɛn tolɛreshɔn: Tik, waid, lɔng, skwea ɛn fabricated-hol pozishɔn.

• Aw i tan: Kɔlɔ, transparency, surface finish, bɔbul, skrat, blak pɔynt ɛn difrɛn tin dɛn we pɔsin kin si.

• Akostik data: Test we, sheet tiknes, spɛshal dimɛnshɔn, frikshɔn rɛnj ɛn ripɔt rɛytin.

• Mɛkanikal data: Impekt pefɔmɛns, tɛnsiɛl prɔpati, flekshɔn prɔpati ɛn rilevɛns strɔkchɔral tɛst.

• UV ɛn wɛda: UV-protɛkshɔn kɔnfigyushɔn, wɛda tɛst infɔmeshɔn ɛn aplikebul warranty kɔndishɔn dɛn.

• Faya pefɔmɛns: Aplaybl flame, smok ɔ bildin klasifikeshɔn fɔ di gred we yu dɔn pik.

• Surface coating: Abrashɔn, anti-grafiti ɔ had-kɔtin infɔmeshɔn we dɛn spɛsifa.

• Pakɛj: Protɛktiv mask, intaliv, palet, edj protɛkshɔn ɛn kɔntena lod plan.

• Traceability: Batch identification, inspekshɔn rɛkɔd ɛn gri fɔ sɛtifiket rikwaymɛnt.

Sastaynabiliti ɛn Ɛnd ɔf Layf Kɔnsidɛreshɔn

Polikabɔnɛt sawnd barɛri panɛl dɛn kin te ɛn dɛn kin de na savis fɔ lɔng tɛm we dɛn yuz di kɔrɛkt gred, freym ɛn mentenɛns sistem. Di wet we dɛn smɔl kin mek am izi bak fɔ transpɔt ɛn instɔleshɔn we yu kɔmpia am wit di tin dɛn we dɛn kin yuz fɔ mek glas we ebi.

Polikabɔnɛt kin bi mɛkanikal risaykul insay fayn industrial risaykul strim dɛn. Aktual risaykulbiliti dipen pan di kɔtin, ink, kɔntaminɛshɔn, kɔlekɛshɔn sistɛm ɛn risaykul fasiliti dɛn we de na di dɛstineshɔn makit.

Di wan dɛn we gɛt di prɔjek fɔ plan fɔ panɛl aydentifikeshɔn, disassembly ɛn matirial separeshɔn usay ɛnd-ɔf-layf rikavari na impɔtant rikwaymɛnt.

Infɔmeshɔn we dɛn nid fɔ mek wan Polikabɔnɛt Saund Barɛri Quote

Send dɛn infɔmeshɔn ya fɔ gɛt kɔrɛkt prɔdak rɛkɛmɔndeshɔn ɛn kot:

• Aplikeshɔn, lɛk haywe, relwe, brij, industrial ɛnklɔzhɔ ɔ akitekchɔral patishɔn.

• Rikwayd sheet tik, wit ɛn lɔng.

• Rikwayd DLR, Rw, STC, OITC ɔ ɔda akostik raytin.

• Rikwayd akostik ɛn mɛkanikal tɛst standad dɛn.

• Klia, lek blu, grɛn, brɔnz ɔ kɔstɔm kɔlɔ.

• Smɔl, ɛmbos ɔ kɔt sɔfays.

• Wan-sayd ɔ tu-sayd UV protɛkshɔn.

• Abrasion-resistant, anti-graffiti ɔ bɔd-protɛkshɔn rikwaymɛnt dɛn.

• Panɛl drɔin, ol pozishɔn, edj ditil ɛn fabrikeshɔn rikwaymɛnt.

• Instɔlɛshɔn ayt, panɛl span ɛn lokal dizayn wind lod.

• Projek lokeshɔn ɛn ɔda tɛmpracha rɛnj.

• Faya, relwe, rod ɔ bildin kɔmplians dɔkyumɛnt dɛn we dɛn nid.

• Total projɛkt kwantiti ɛn ɛstimat dilivri schedule.

• Destineshɔn pɔt, tred tɛm ɛn pak rikwaymɛnt.

       Send Yu Projek Spɛsifikeshɔn dɛn    

Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm Bɔt Polikabɔnɛt Sɔndpruf Shit dɛn

Wetin na polikabɔnɛt sawndpruf sheet?

Na wan sɔlid ɔ strɔkchɔ polikabɔnɛt shit we dɛn kin yuz fɔ ridyus di sawnd transmishɔn we de kɔmɔt na di ays insay transparent nɔys barɛri, mashin ɛnklɔzhɔ, patishɔn ɛn infrastukchɔ prɔjek. I de kɔba akostik separeshɔn wit transparency ɛn impak rɛsistɛns.

Aw bɔku nɔys we wan polikabɔnɛt sawndpruf sheet kin ridyus?

HSQY 6–12mm sכlid polycarbonate sawnd barεri shit dεm de gi aprכksimatli 29–34dB fכ rεfrεns sawnd rεdukshכn, dipכnt pan tiknes εn tεst kכndishכn dεm. Di kɔmplit barɛri rizɔlt bak dipen pan in ayt, lɔng, freym, sil ɛn instɔleshɔn.

Polikabɔnɛt sheet de absɔb sawnd ɔ i de mek sawnd nɔ de?

Wan smol sɔlid polikabɔnɛt shit de wok mɔ lɛk riflɛkɛtiv sawnd insuleshɔn matirial. i de ridyus di sawnd transmishכn bכt nכmal wan i nכ de abzכp sawnd di sem we lεk porous akostik fכm כ minral-ful absכptiv panεl dεm.

Us tik we bɛtɛ fɔ mek di nɔys barɛri fɔ di aywe?

Di tik we dɛn kin yuz na 8mm, 10mm ɛn 12mm. Di kɔrɛkt tiknɛs dipen pan di target sawnd ridɔkshɔn, panɛl dimɛnshɔn, briz lod, sɔpɔt spɛshal, impak risk ɛn lokal infrastukchɔ standad.

Sɔlid ɔ olo polycarbonate bɛtɛ fɔ nɔys barɛri?

Sɔlid polikabɔnɛt na jɔs fɔ pik fɔ ebi ebi transparent haywe ɛn relwe nɔys barɛri bikɔs ɔf in mas, impak rɛsistɛns ɛn strɔkchɔral kɔnsistɛns. Olo shit kin fayn fɔ layt patishɔn ɛn sɛlɛks ɛnklɔz bɔt nid fɔ separet akostik ɛn strɔkchɔral ɛvalueshɔn.

Yu tink se tu polikabɔnɛt sheet dɛn kin mek yu nɔ gɛt bɛtɛ sawnd?

Yɛs. Wan dabl-layer sistem we gɛt ay ples we dɛn mek fayn fayn wan kin gi ay sawnd insuleshɔn pas wan sheet. Di tu panɛl dɛn, di ay gap, di sil dɛn ɛn di freym fɔ bi disayn lɛk wan kɔmplit akostik asɛmbli.

Yu tink se polycarbonate soundproof sheet fayn fɔ yuz na do?

Yɛs, we dɛn pik wan gred we gɛt UV we de na do. Di shit spɛsifikɛshɔn fɔ tink bak bɔt briz, sno, ays blɔk, tɛmpracha chenj, kemikal ɛksplɔshɔn ɛn di sɔpɔtin freym.

Yu tink se transparent polycarbonate go tɔn yɔlɔ na do?

Polikabɔnɛt we nɔ protɛkt kin lɔs optik kwaliti ɔnda lɔng tɛm UV ɛksplɔshɔn. UV-protɛkt ɔda gred dɛn we dɛn mek fɔ ridyus yɔlɔ ɛn pefɔmɛns lɔs. Di protɛkshɔn sayd ɛn di warranty kɔndishɔn dɛn fɔ kɔnfɔm bifo dɛn instɔl am.

Yu tink se dɛn kin yuz polikabɔnɛt sawnd barɛri panɛl dɛn along di relwe?

Yɛs. Dɛn kin yuz polikabɔnɛt panɛl dɛn fɔ mek relwe ɛn ay-spid rel nɔys barɛri dɛn. Di prɔjek dɛn fɔ spɛsifa akostik pefɔmɛns, aerodaynamik prɛshɔn, impak rɛsistɛns, panɛl ritɛnshɔn, faya bihayvya ɛn di aplikebul relwe sefty standad.

Yu tink se polikabɔnɛt sheet dɛn we nɔ de mek sawnd nɔ de mek faya nɔ bɔn?

Faya pefɔmɛns dipen pan di ɛksaktɔl polikabɔnɛt fɔmyulashɔn, tik ɛn tɛst we dɛn de du. Flame-retardant gred dɛn de, bɔt dɛn fɔ jɔs klem wan patikyula UL, EN ɔ bildin klasifikeshɔn we di kɔrɛspɔndɛns ripɔt sɔpɔt am.

Yu tink se polikabɔnɛt kin skrach izi wan?

Standart polikabɔnɛt gɛt smɔl sɔfays hadnɛs pas glas. Dɛn fɔ tink bɔt gred dɛn we nɔ de abrashɔn ɔ we gɛt had kɔt fɔ say dɛn we dɛn kin klin bɔku tɛm, san, grafiti ɔ pɔblik kɔntakt.

Yu tink se dɛn kin ad anti-grafiti tritmɛnt?

Anti-graffiti ɔ abrasion-resistant surface options kin bi evaluate fɔ infrastrakcha prɔjek dɛm. Di kemikal fɔ klin ɛn di we aw dɛn de pul am fɔ kɔmpit wit di kɔtin we yu dɔn pik.

Yu tink se dɛn kin print di tin dɛn we dɛn kin yuz fɔ protɛkt bɔd dɛn na panɛl dɛn we kin si klia wan?

Yɛs. Dɛn kin tɔk bɔt layn, dɔt ɔ ɔda mak dɛn we pɔsin kin si fɔ ɛp bɔd dɛn fɔ no di tin we de ambɔg am. Gi di patɛn, spɛshal, kɔlɔ ɛn envayrɔmɛnt spɛsifikɛshɔn we dɛn nid wit di prɔjek drɔin.

Yu tink se dɛn kin kɔba di polikabɔnɛt sawnd barɛri sheet dɛn?

Sɔlid polikabɔnɛt shit dɛn we dɛn dɔn pik kin kol bɛnt insay wan aprɔv minim rayus ɔ thermoformed insay kɔba panɛl dɛn. Tiknɛs, kɔtin, UV ɔriɛnteshɔn ɛn rɛsɛdyual strɛs fɔ tink bɔt.

HSQY kin kot en drill di sheet dem?

Wi kin tɔk bɔt kɔstɔm kɔt, drɔlin, CNC mashin ɛn edj prɔsesin. Send wan dimɛnshɔn drɔin we de sho tolɛreshɔn, ol, ed distans, kɔna ɛn sɔfays rikwaymɛnt.

Us kɔlɔ dɛn de?

Tipik opshɔn dɛn inklud klia, lek blu, grɛn ɛn brɔnz. Dɛn kin tɔk bɔt di kɔlɔ dɛn we dɛn kɔstɔmayt akɔdin to di kwantiti we dɛn nid, di layt transmishɔn ɛn di akitɔk dizayn.

Aw dɛn fɔ put polycarbonate soundproof sheet dɛn?

Panɛl dɛn fɔ instɔl insay wan injinɛri freym wit kɔmpatibl gasket, inof edj ɛnjɔymɛnt, tɛmal-ɛkspɛnshɔn alawɛns ɛn sial jɔyn. Di freym ɛn fawndeshɔn fɔ mit di spɛsifikɛd briz ɛn strɔkchɔral lod dɛn.

Yu tink se polycarbonate bɛtɛ pas glas fɔ mek nɔys barɛri?

Bɔku tɛm dɛn kin pik polikabɔnɛt usay di wet we smɔl, ay impak rɛsistɛns ɛn izi fɔ mek impɔtant. Glas kin gi big surface hardness ɛn difrɛn akostik kwaliti dɛn. Di kɔrɛkt matirial dipen pan di kɔmplit prɔjek spɛsifikɛshɔn.

Yu tink se dɛn kin yuz di polikabɔnɛt sawnd barɛri sheet bak?

Polikabɔnɛt kin risaykul tru fayn industrial risaykul chanɛl dɛn. Akseptɛns dipen pan kɔtin, printin, kɔntaminɛshɔn, kɔlɛkshɔn sistɛm ɛn lokal risaykul infrastukchɔ.

A kin gɛt sampul bifo a mek ɔda?

Sampul sɔpɔt de fɔ kɔstɔma dɛn we nid fɔ evaluate matirial kwaliti, tik, kɔlɔ, surface finish ɛn transparency. Ful akostik ɛn strɔkchɔral aprɔval fɔ bi bays pan rilevɛns ripɔt ɛn prɔjek tɛst.

Wetin na di minimum ɔda kwantiti?

Di minim oda kwantiti dipen pan tik, dimɛnshɔn, kɔlɔ, sɔfayz kɔtin ɛn fabrikeshɔn. Standart klia shit kin gɛt difrɛn tin dɛn we dɛn nid frɔm kɔstɔm-kɔlɔ ɔ kɔt prɔjek panɛl dɛn.

Aw a go ebul fɔ gɛt kɔrɛkt kot?

Send di sheet tiknes, dimɛnshɔn, kɔlɔ, akostik rikwaymɛnt, tɛst standad, totɛl kwantiti, fabrikeshɔn drɔin, wind-lɔd rikwaymɛnt, prɔjek lokeshɔn ɛn dɛstineshɔn pɔt. HSQY kin den evaluate wan suitable spesifikeshɔn.

Polikarbonɛt Saundpruf Sheet Manufacturer

HSQY Plastic Group de saplae polycarbonate sheet fɔ noys barɛri, kɔnstrɔkshɔn, industrial protɛkshɔn, glazing ɛn fabricated plastic aplikeshɔn. Wi de sɔpɔt di glob ɔl kɔntrakta dɛn, distribyushɔn ɛn prɔjek bayer dɛn wit prodak sɛlɛkshɔn, kɔstɔm dimɛnshɔn, kɔlɔ maching, sampul savis ɛn ɛkspɔt pak.

Fɔ wan polycarbonate sawnd barɛri kot, sɛn wi yu prɔjek drɔin dɛn, tiknes we yu nid, akostik retinj, panɛl dimɛnshɔn, kɔlɔ, kwantiti, aplikebul standad ɛn dɛstineshɔn pɔt.

       Kontakt HSQY fɔ Sampul ɛn Prayz