Sial Film fɔ CPET Trey

Wetin Na Sial Film fɔ CPET Trey?

Siling film fɔ CPET trey , we dɛn kin kɔl bak CPET trey liding film, ovenable lidding film ɔ rɛdi-mil trey film, na fleksibul rol film we dɛn mek fɔ ɔt-sial kristalin polyethylene terephthalate fud trey.

Dɛn kin yuz CPET tre fɔ it kol, frɔzɛn it, aylayn ketɛning, bekeri prodak ɛn it dɛn we dɛn dɔn pripia we dɛn kin ɔt bak na maykrowev ɔ kɔmɔn ɔvin. Di lidding film de klos di ful trey ɛn i kin gi lik rɛsistɛns, tamper ɛvidɛns, izi fɔ opin, anti-fɔg pefɔmɛns, gas barɛri ɛn print branding.

HSQY de saplae PET-based, BOPET-coated ɛn PET/PE laminated siling film fɔ kɔmpitabl CPET fud trey. Di opshɔn dɛn we de na di fim we izi fɔ pul, strɔng lɔk-sil fim, anti-fɔg fim, fim we dɛn kin print, fim we nɔ de pank ɛn ay-baria fim fɔ modifyed atmosfɛs pak.

Nɔto ɔl CPET siling film fayn fɔ ɛvri maykrowev ɔ ɔvin prɔses. Di rayt fim fɔ pik akɔdin to di trey flɛnch, it prodak, di we aw dɛn de ɔt, maksimal tɛmpracha, di tɛm we dɛn de kuk ɛn di trey siling mashin.

Wetin Mek CPET Trey dɛn nid fɔ gɛt spɛshal Lidding Film

CPET na kristaliz fכm fכ PET we dεn divεlכp fכ aplikεshכn dεm we nid bכku dimεnshכnal stεbiliti na εlevεt tεmprachכ. Bɔt di ɔt we di trey de mek nɔ de mek ɛni lid fim we de na di lid kin ebul fɔ ɔvin.

Wan CPET lidding film fɔ du sɔm wok dɛn we dɛn de pak, distribyushɔn ɛn ɔt:

• Sial kɔnsistɛntli to di spɛshal CPET trey flɛnch

• Resist lik we yu de sheb am kol ɔ frɔz

• Mentɛn fleksibiliti na lɔw tɛmpracha

• Tink bɔt di maykrowev ɔ ɔvin saykl we dɛn dɔn tɔk bɔt

• Kontrol stim ɛn intanɛnt pakej prɛshɔn

• Opin klin wan bifo ɔ afta yu dɔn ɔt am

• Nɔ shrinkage pasmak, tear ɔ delamination

• Rimain kompitibul wit printin ink, adeziv ɛn anti-fɔg tritmɛnt

So dɛn fɔ evalyu di fim, trey ɛn it as wan kɔmplit pak sistɛm.

CPET Tray Sealing Film Spesifikasi

Di tebul we de kam biɛn ya de sɔmariz kɔmɔn opshɔn dɛn we de akɔdin to di HSQY CPET trey lidding-film rɛnj. Faynal spɛsifikɛshɔn dɛn fɔ kɔnfɔm akɔdin to di fim gred we dɛn dɔn pik, trey strɔkchɔ, pak it ɛn ɔt kɔndishɔn.

Di tɛmpracha rɛnj we dɛn sho ɔp de aplay nɔmɔ fɔ di gred dɛn we dɛn dɔn pik fɔ di aplikeshɔn. Dɛn nɔ fɔ ɛksplen am as yunivasal raytin fɔ ɛvri fim we de na dis kategori.

Tayp dɛn fɔ CPET Trey Lidding Film

Ovenable PET-Based Lidding Film we yu kin yuz fɔ mek tin dɛn

Ovenable PET-based film na divεlכp fכ tכlerεt wan spεsifi k kכnvεshכnal-oven כ maykrowev-hεtin saykl we dεn kכmbayn am wit wan kompitibl CPET trey.

Dipen pan di we aw dɛn mek am, di fim kin kɔntinyu fɔ tay we dɛn de ɔt am, i kin kɔmɔt na di tre as di paket de wam, ɔ i kin nid fɔ pul am bifo i kuk.

Di wan dɛn we de bay di fim fɔ kɔnfɔm if dɛn mek di fim fɔ:

• Maykrowev rihit nɔmɔ

• Kɔnvɛnshɔnal ɔvin nɔmɔ

• Dual-ovenable maykrowev ɛn kɔvɛnshɔnal ɔvin yuz

• Rimoval bifo yu ɔt am

• Piercing ɔ venting bifo yu ɔt am

• Lef-on kuk we dɛn fala wit peel-off opin

Izi-Pil CPET Lidding Film

Fim we izi fɔ pul de mek wan sikrit sil we dɛn de pak, stɔrɔj ​​ɛn transpɔt we i de alaw di pɔsin fɔ pul di lid smɔl smɔl frɔm wan tab we dɛn dɔn pik fɔ pul am.

Di film fɔ peel insay wan kɔntinyu pis we nɔ go te pasmak, plastic fragmɛnt ɔ damej to di CPET trey flɛnch.

Rilat prodakt dɛn de tru HSQY’s    PET/PE izi-pil silin film    rɛnj.

Hɛt-Rilis Pil Film

Dɛn mek di fim we de rilis di ɔt fɔ mek i gɛt sikrit sil we dɛn de kip am na frij ɔ we dɛn dɔn frɔz ɛn afta dat i go ridyus di bond we i gɛt to di CPET trey we dɛn de ɔt am na maykrowev ɔ ɔvin.

Dis kin mek di pɔsin we de bay fɔ pul di fim izi wan afta i dɔn kuk. Di rilis tɛmpracha ɛn ɔt instrɔkshɔn fɔ validet fɔ di patikyula it ɛn trey.

Lɔk-Sil ɔ Wɛld-Sil Film

Lɔk-sil fim de mek wan strɔng klos ɛn dɛn kin pik am usay likwid kɔntinɛnt, tamper ɛvidɛns ɛn distribyushɔn sikyɔriti impɔtant pas izi opin.

Di fim kin nid fɔ kɔt ɔ pank bifo dɛn it di it ɔ wam am. Di instrɔkshɔn dɛn fɔ ɔpreshɔn fɔ klia na di paket we dɛn dɔn dɔn.

Anti-Fog CPET trey film

Anti-fog film de yuz aditiv ɔ kɔtin fɔ spre kɔndens mɔstɔ insay wan tin transparent layt instead fɔ alaw drɔp dɛn we pɔsin kin si fɔ fɔm.

I fayn fɔ it tin dɛn we dɛn dɔn kol, fɔ rital prɔdak dɛn we dɛn put na frij, tin dɛn we dɛn kin yuz fɔ mek bɛri ɛn it dɛn we dɛn pak we dɛn wam ɛn afta dat dɛn kin kol kwik kwik wan.

High-Barrier CPET Lidding Film we gɛt fɔ du wit di tin dɛn we de apin

Di fim we gɛt ay barɛri gɛt EVOH ɔ ɔda ɔksijɛn-baria matirial fɔ ridyus di ɔksijɛn we de insay ɛn fɔ lɔs di gas dɛn we dɛn dɔn chenj di atmosfɛs.

Yu kin yuz am fɔ sɛlɛkɛt kol rɛdi it, prɔtin, sos ɛn MAP aplikeshɔn dɛn we dɛn kam togɛda wit wan kɔmpitabl ay-baria trey.

CPET Trey Film we dɛn print

Print lidding film kin inklud logo, it nem, nyutrishɔn infɔmeshɔn, kuk instrɔkshɔn, barɔd, QR kɔd ɛn prɔmoshɔnal grafik.

Print ovenable-film projɛkt dɛn nid ink ɛn adeziv dɛn we de kɔntinyu fɔ fayn ɔnda di ɔt kɔndishɔn dɛn we dɛn dɔn sho.

Izi Pil vs. Lɔk Sil vs. Hɛt-Rilis Film

Maykrowev, Ɔvin ɛn Friza Kɔmpatibiliti

Yu tink se di Fim Go De na di Trey We dɛn De Kuk?

If di fim kin de na di CPET trey we i de kuk, i dipen ɔl pan di fim gred we yu dɔn pik ɛn di instrɔkshɔn dɛn we di kɔstɔma dɛn dɔn gri fɔ.

Di tin dɛn we dɛn kin yuz fɔ pak di tin dɛn we dɛn kin yuz fɔ pak tin dɛn na:

• Rimov di film kɔmplit wan bifo yu ɔt am

• Pil bak wan kɔna bifo yu put am na maykrowev

• Pis di fim bɔku tɛm bifo yu wam am

• Lɛf di fim ataya ɛn alaw wan intagreted vent fɔ rilis stim

• Lɛf di fim tay we yu de kuk ɛn pul am afta yu dɔn kuk

Dɛn nɔ fɔ ɛva kɔpi dɛn instrɔkshɔn ya frɔm ɔda paket we dɛn nɔ validet di aktual it, trey, fim ɛn kuk saykl.

Stiam Ventin ɛn Intanɛt Pakɛj Prɛshɔn

Wata we de insay rɛdi it kin tɔn to stim we dɛn de ɔt am na maykrowev ɔ ɔvin. If di paket ful-ɔp wit sial ɛn i nɔ gɛt kɔntrol fɔ mek di vent, di prɛshɔn we de insay kin go ɔp.

If yu prɛs am pasmak, dat kin mek yu:

• Film balɔn

• Sil we nɔ wok wantɛm wantɛm

• Hot likwid we de lik

• Tray difɔmeshɔn

• Opening we nɔ sef afta dɛn dɔn ɔt am

Ventin opshɔn dɛn inklud prɛ-piercing, laser skɔring, maykroperforeshɔn, sɛlf-ventin valv, kɔntrol peel-bak instrɔkshɔn ɔ wan film we dɛn mek fɔ rilis pan wan spɛsifikɛd prɛshɔn.

Aplikeshɔn dɛn fɔ CPET Trey Silin Film

Frɔzɛn rɛdi it dɛn

Dɛn kin yuz CPET trey ɛn kɔmpitabl lidding film fɔ frɔzɛn pasta, rays dish, mit it, vɛjitebul, sos, kasrɔl ɛn multicomponent it.

Di fim fɔ kip di sil trɛnk ɛn fleksibiliti ɔlsay na di friz, stɔrɔj, transpɔt ɛn rihit.

Di it dɛn we dɛn dɔn pripia we dɛn dɔn kol

Di aplikeshɔn dɛn we dɛn kin yuz fɔ it kol kol inklud pasta, mit we dɛn kuk, vɛjitebul, sos, it dɛn we dɛn kin mek fɔ it ɛn it dɛn we dɛn dɔn rɛdi na supamakit.

Anti-fɔg ɛn izi-pil fim dɛn kin mek di prɔdak si di prɔdak ɛn i kin izi fɔ yuz.

Aylayn Ketin

Dɛn kin yuz CPET it trey fɔ aylayn ɛntrɛ, sayd dish, dɛzat ɛn spɛshal it dɛn we nid fɔ kɔntrol di pat, friz, transpɔt ɛn rihit.

Film rol wit, sil trɛnk ɛn peel bihayvya fɔ mach di aylayn kata in filin ɛn rihit prɔses.

Ospital, Skul ɛn Instityushɔnal It

Instityushɔnal fudsavis pakej dɛn kin nid fɔ opin izi wan, fɔ no klia wan di it, fɔ kɔntrol di pat pan di pat, fɔ dipen pan lik rɛsistɛns ɛn fɔ print instrɔkshɔn fɔ ɔt.

Bakery ɛn Ovenable Desɛt dɛn

Dɛn kin yuz CPET trey dɛn we dɛn dɔn pik fɔ bekɛri prɔdak, pay, kek, pudin ɛn dɛzat we dɛn kin frɔz, transpɔt ɛn ɔt bak.

Film selekshɔn fɔ tink bɔt shuga, fat, ɔyl ɛn lokal sɔfays tɛmpracha we dɛn de ɔt.

Meal Delivery ɛn Sɛntral Kichin dɛn

Sɛntral kichin, kɔntrakt pak ɛn it-delivri kɔmni dɛn de yuz CPET pak fɔ batch-pripia it dɛn we nid kol stɔrɔj, transpɔt ɛn kɔntrol rihit.

High-Barrier Film fɔ MAP rɛdi it dɛn

Modified atmosphere packaging de riples bɔku pan di nɔmal ɛya insay di paket wit wan kɔntrol fud-grɛd gas miksɔp.

Standard CPET lidding film nɔ fɔ ɔtomɛtik asum fɔ gi sufayf ɔksijɛn barɛri fɔ MAP ɔ ɛkstend-shɛlf-layf pak.

Wan pakej we rɛdi fɔ MAP kin nid:

• Strukchɔ trey we gɛt ay barɛri

• EVOH-based lidding film

• Difayn ɔksijɛn transmishɔn rit

• Difayn wata-vapour transmishɔn rit

• Validated gas miksɔp

• Hɛmetik sil we pɔsin kin abop pan

• Di ɔksijɛn we lɛf we dɛn kin kɔntrol

• Stebul frij distribyushɔn

Di ay-baria pefɔmɛns ɛn kɔmɛshɔnal shelf layf fɔ tɛst yuz di aktual it, trey, fim, gas ɛn pak ikwipmɛnt.

Anti-Fog Pɔfɔmɛnshɔn fɔ Chilled Rɛdi It

Kɔndenseshɔn kin kam we dɛn sial di it we wam ɔ wet ɛn afta dat dɛn kin kol am. Di drɔp dɛn we pɔsin kin si kin mek di pɔsin we de it am nɔ ebul fɔ si di it.

Anti-fog pefɔmɛns dipen pan:

• Kɔrɛkt ɔriɛnteshɔn fɔ di anti-fɔg sayd

• Fɔd tɛmpracha we dɛn de sial

• Mɔstɔ we de insay

• Spid we i de kol

• Tɛmpratura we de na frij

• Di tɛm we dɛn fɔ kip am

• Film kotin ɔ aditiv lɛvɛl

Anti-fɔg tɛst fɔ riprodyuz di aktual it-fil, kol, stɔrɔj ​​ɛn rihit prɔses.

CPET Trey ɛn Lidding Film Kɔmpatibiliti

CPET trey frɔm difrɛn manifakta dɛn kin yuz difrɛn rɛsin fɔmyulashɔn, risaykul-kɔntinɛnt rɛsɛshɔn, sɔfayz tritmɛnt ɛn flɛnch kɔndishɔn.

Bifo yu pik di fim, kɔnfirm se:

• Di wan we mek trey ɛn di kɔd fɔ di prɔdak

• CPET matirial fɔmyulashɔn

• Vɛjin ɔ risaykul-kɔntinɛnt trey

• Tray flange wit wit

• Flange flatness ɛn surface finish

• Prɛzɛns fɔ ɛni sil kɔtin

• Tray kala ɛn pigmɛnt

• Di kayn sil we dɛn nid

• Di we aw dɛn nid fɔ kuk

Wan fizik trey sampul na strɔng wan we dɛn de divɛlɔp wan nyu fim spɛsifikɛshɔn.

Di wan dɛn we de bay kin rivyu HSQY dɛn    CPET fud trey rεnj    we dεn de divεlכp wan komplit trey-εn-film sכlushכn.

Tray Sial Mashin Kɔmpatibiliti

CPET lidding-film rol dɛn fɔ mach di trey siling mashin, tul layout ɛn prodakshɔn spid.

Impɔtant infɔmeshɔn bɔt di ikwipmɛnt dɛn na:

• Mashin manifakta ɛn mɔdel

• Manual, semi-ɔtomɛtik ɔ ɔtomɛtik ɔpreshɔn

• Tray mold ɛn kaviti layout

• Nɔmba fɔ di trey dɛn fɔ ɛni saykl we dɛn kin sidɔm

• Maksimal fim wit

• Kor insay dayamita

• Maksimal rol ausayd dayamita

• Maksimal wet we di rol gɛt

• Unwind di dairekshɔn

• Sial sayd wund insay ɔ na do

• Sil-plet profayl

• Sial tɛmpracha rɛnj

• Dwɛl tɛm

• Prɛshɔn fɔ sial

• Prodakshɔn spid

• Di we aw dɛn kin kɔt fim

• Sensor fɔ ay-mak we dɛn print-film

• MAP ɔ vaykum gas-flush fɛnshɔn

HSQY de saplae bak    fud trey siling mashin    fɔ ɔt siling, MAP ɛn rɛdi-mil pak layn dɛn.

Aw di CPET Trey Hɛt-Silin Prɔses De Wok

1. Fɔ ful-ɔp di it: Dɛn kin ful-ɔp di it we dɛn dɔn pripia insay di CPET trey na di tɛmpracha we dɛn dɔn tɔk bɔt.

2. Flɛnch inspekshɔn: Dɛn kin pul it, sos, ɔyl ɛn mɔstɔ frɔm di silin flɛnch usay i pɔsibul.

3. Tray positioning: Dɛn kin put di trey we ful-ɔp insay di silin tul.

4. Film indexing: Di lidding film de posishun wit di siling layt we de fes di CPET trey.

5. Ɔt ɛn prɛshɔn: Di silin plet de aplay di tɛmpracha ɛn prɛshɔn we dɛn dɔn validet.

6. Dwell time: Di tul de kɔntinyu fɔ lɔk fɔ lɔng tɛm fɔ mek di siling layt go bon to di trey flange.

7. Kul: Di paket de divɛlɔp sil trɛnk as i de kɔmɔt na di tul we dɛn dɔn ɔt.

8. Fim kɔt: Dɛn kin kɔt ɔ riwan di fim we de rawnd am akɔdin to di we aw dɛn mek di mashin.

9. Inspekshɔn: Dɛn kin chɛk di trey we dɔn dɔn fɔ si if i gɛt wrinkles, kɔntaminɛshɔn, chanɛl lik ɛn sial we nɔ kɔmplit.

Aw fɔ Establish di Kɔrɛkt Silin Windo

Di siling winda na di kɔmbaynshɔn fɔ tɛmpracha, prɛshɔn ɛn di tɛm we dɛn de de we de mek wan sil we pɔsin kin abop pan we nɔ de pwɛl di fim ɔ trey.

Prodakshɔn tɛst fɔ disayd:

• Minimum sil-initiashɔn tɛmpracha

• Maksimal tempɔret bifo film distɔrshɔn

• Minimum ifektiv tɛm fɔ de

• Prɛshɔn we dɛn nid fɔ sial

• Sial trɛnk wantɛm wantɛm afta yu dɔn sial

• Pil fɔs afta yu dɔn kol ɔ friz

• Pil fɔs afta yu dɔn ɔt am bak

• Pɔfɔmɛnshɔn wit mɔstɔ, ɔyl ɔ sos kɔntaminɛshɔn

• Film trakin na prodakshɔn spid

• Tray flange difɔmeshɔn

• Paket lik ɛn bɔrst rɛsistɛns

Fɔ mek di silin tɛmpracha go ɔp nɔto ɔltɛm na di kɔrɛkt sɔlv fɔ wik sil. Film oriɛnteshɔn, prɛshɔn, tul kɔntakt, trey sɔfays ɛn flɛnch klin bak fɔ chɛk.

Kɔmɔn CPET Trey Siling Prɔblɛm dɛn

CPET Lidding Film we dɛn print wit kɔstɔm

HSQY kin gi kɔstɔm-print lidding film fɔ branded rital it, aylayn ketɛning, institiushɔnal fudsavis ɛn prayvet-lɛbul pak.

Di wok dɛn we dɛn kin du fɔ print fim dɛn kin nid:

• Fayl dɛn we dɛn kin ɛdit fɔ du artwok

• Finished rol wit

• Print ripit lɔng

• Nɔmba fɔ di kɔlɔ dɛn

• Pantone ɔ apruv kɔlɔ standad dɛn

• Print dairekshɔn

• Ay-mak pozishɔn

• Tray orientation in di siling tul

• Sial sayd wund insay ɔ na do

• Maykrowev ɛn ɔvin we yu nid

• Fɔd-kɔntakt ɛn ink we dɛn nid

Print ink ɛn laminate adhesives fɔ stil fayn ɔl di tɛm we dɛn want fɔ friz, rihit ɔ kuk.

Fɔd-Kɔntakt Kɔmplians ɛn Dokumɛnt

Fɔd-kɔntakt suitabiliti dipen pan di ɛksaktɔ PET rɛsin, sil kɔtin, PE layt, adeziv, anti-fɔg tritmɛnt, printin ink ɛn di kɔndishɔn we dɛn want fɔ yuz.

Di wan dɛn we de bay fɔ gi:

• Di kɔntri ɔ makit usay dɛn de go

• Di kayn it we dɛn kin it

• Dairekt kondishɔn fɔ kɔntakt it

• Di tɛm we pɔsin fɔ kɔntakt

• Chilled ɔ frozen stɔrɔj ​​rikwaymɛnt dɛn

• Maykrowev ɔt kɔndishɔn dɛn

• Kɔnvɛnshɔnal-ɔvin tɛmpracha ɛn tɛm

• Struktrɔ we dɛn print ɔ we dɛn nɔ print

• Diklareshɔn dɛn we dɛn nid ɔ fɔ tɛst fɔ maykreshɔn

• Restricted-substance rikwaymɛnt dɛn

Dokumɛnt fɔ kɔnfyus fɔ di ɛksaktɔl film strɔkchɔ ɛn yuz kɔndishɔn pas fɔ tek am se i aplay to ɛvri CPET lidding film.

Yu tink se CPET Tray Sealing Film Risaykul?

Risaykul dipen pan di kɔmplit tre-ɛn-film pakej.

Wan PET-kɔmpatibl mono-matirial lidding dizayn kin sɔpɔt mɛkanikal PET risaykul na sɔm makit dɛn. Bɔt, PET/PE, BOPET/PE ɛn fim dɛn we gɛt bɔku adeziv ɔ barɛri polima dɛn nɔ kin aksept ɔlsay na di PET risaykul sistɛm dɛn.

Di tin dɛn we de afɛkt di we aw pɔsin kin risaykul na:

• Film polimכr strכkchכ

• CPET trey kompozishun

• Abiliti fɔ pul di fim na di trey

• Sial di tin dɛn we dɛn kin kɔt ɛn di tin dɛn we dɛn kin ad

• Ink dɛn we dɛn de print

• Lebul ɛn sliv dɛn

• Fɔd kɔntaminɛshɔn

• Lokal kɔlɛkshɔn ɛn sɔt infrastukchɔ

CPET siling film dɛn nɔ fɔ diskrayb as bayɔdigradabl pas dɛn dɔn divɛlɔp di ɛksaktɔ prodak ɛn indipɛndɛnt wan verify fɔ wan rɛkɔgnayz bayɔdigrɛdeshɔn ɔ kɔmpɔstabiliti standad.

Kastom CPET Silin Film Opshɔn dɛn

• Kastom PET, BOPET-koted ɔ PET/PE film strɔkchɔ

• Kastom totɛl tiknɛs

• I izi fɔ pul ɔ ɔt-rilis bihayvya

• Lɔk-sil ɔ strɔng pɔrmanent sil

• Customized peel fos

• Friza-grɛd pefɔmɛns

• Maykrowev-grɛd pefɔmɛns

• Fim we gɛt tu ɔvin

• Anti-fɔg tritmɛnt

• EVOH ay-barɛri strɔkchɔ

• Kastom OTR ɛn WVTR target dɛn

• Konstrɔkshɔn we nɔ de pan pank

• Steam-venting ɔ dizayn we gɛt pɔrfɔt

• Kastom logo ɛn grafik dɛn we dɛn print

• Kastom film wit

• Kastom rol lɔng

• Kastom kor ɛn ɔdasay rol dayamita

• Kastom winding dairekshɔn

• Rejista mak fɔ ɔtomɛtik silin layn dɛn

• Kastom katon, lɛbl ɛn ɛkspɔt palet

Kwaliti Kontrol fɔ CPET Trey Lidding Film

Stebul film kwaliti de ɛp fɔ ridyus di pakej lik, kuk fayl, inkɔnsistɛns pil, rol west ɛn siling-layn dawt tɛm.

Di tin dɛn we gɛt fɔ du wit inspekshɔn kin bi:

• Film strɔkchɔ ɛn raw matirial verifyeshɔn

• Tɔtɔl tik ɛn tolɛreshɔn

• Coating ɔ individyual layt kɔnsistɛns

• Rol wit tolɛreshɔn

• Rol lɔng ɛn wet

• Kor saiz ɛn ɔdasay dayamita

• Rol alaynɛshɔn ɛn winding tɛnsiɔn

• Transparency, haze ɛn glos

• Surface skrat, jel ɛn kɔntaminɛshɔn

• Sil-initieshɔn pefɔmɛns

• Sil trɛnk

• Kol ɛn hot peel fɔs

• Film-tearing ɛn sharding ɛvalueshɔn

• Anti-fɔg tɛst we dɛn kin du

• Pankchɔ ɛn tɛnsiɛl pefɔmɛns

• Ɔksijɛn ɛn mɔstɔ transmishɔn we dɛn spɛsifa

• Maykrowev ɔ ɔvin ɔt tɛst

• Print kɔlɔ ɛn rɛjista kɔrɛkt wan

• Lamineshɔn-bɔnd trɛnk

• Paket ɛn palet protɛkshɔn

Packaging, Storage ɛn Intanɛshɔnal Shipin

CPET lidding-film rol dɛn nɔmal fɔ protɛkt frɔm dɔst, mɔstɔ, impak ɛn rol-ɛj damej bifo dɛn ship dɛn.

Di tin dɛn we yu kin pik fɔ pak tin dɛn kin bi:

• Bag dɛn we de insay pɔsin we de protɛkt pɔsin

• Protektɔ dɛn we gɛt rɔl-ɛnd

• Wan wan ɛkspɔt katon dɛn

• Batch ɛn spesifikeshɔn lɛbl dɛn

• Palet strɛch wrapping

• Kɔna ɛn edj protɛkshɔn

• Fumigation-fri ɛkspɔt palet dɛn

• Di mak dɛn we dɛn kin ship fɔ di kɔstɔma dɛn

Fim fɔ de na in ɔrijinal pak na klin, dray ples we nɔ gɛt dairekt san layt, ay humidity, ɔt pasmak ɛn fyzikal damej.

Wetin Mek Yu Pik HSQY as Yu CPET Trey Siling Film Manufacturer?

• Dairekt manifakta saplai: Sɔpɔt fɔ rɛdi-mil prodyusɔ, aylayn ketɛn, sɛntral kichin, kɔntrakt pak ɛn pak distribyushɔn.

• CPET pak ɛkspiriɛns: HSQY de saplae ɔl tu di CPET it trey ɛn kɔmpitabl lidding-film sɔlvishɔn.

• Bɔku film strɔkchɔ dɛn: PET-bɛs kɔt, BOPET-kɔt ɛn PET/PE opshɔn dɛn de.

• Di opshɔn dɛn fɔ ɔt: Dɛn kin mek sɔm fim dɛn we dɛn dɔn pik fɔ friza, maykrowev, ɔvin ɛn dual-ovenable aplikeshɔn dɛn.

• I izi fɔ pul ɛn strɔng sil: Dɛn kin mek di opin pefɔmɛns mach to di it ɛn distribyushɔn sistɛm.

• Anti-fog ɛn ay-baria gred: Fɔnshɔnal fim dɛn kin sɔpɔt chill prɛzɛntɛnshɔn ɛn MAP pak.

• Kastom rol spesifikeshɔn dɛn: Wid, lɔng, kɔr, dayamita ɛn wayndin dairekshɔn kin ajɔst.

• Kastom printin: Yu kin ad logo, grafik, instrɔkshɔn fɔ ɔt ɛn rɛjista mak.

• Tray-and-film matching: Dɛn kin rikɔmɛnd bay di aktual trey sɛmpul ɛn prodakshɔn trayal.

• Mashin sɔpɔt: Dɛn kin rivyu di fim agens manual, sɛmi-ɔtomɛtik ɛn ɔtomɛtik silin ikwipmɛnt.

• Trial-roll support: Dɛn kin ebul fɔ evaluate sampul dɛn bifo kɔmɛshɔnal prodakshɔn.

• Ekspɔt savis: Katon, palet ɛn intanashɔnal shiping arenjmɛnt dɛn de.

Infɔmeshɔn we dɛn nid fɔ mek wan CPET Silin Film Kɔt

Fɔ gɛt kɔrɛkt fim rɛkɛmɔndeshɔn ɛn faktri kot, duya gi bɔku pan dɛn infɔmeshɔn ya as yu ebul:

• CPET trey suplai ɛn prodak kɔd

• Trey matirial ɛn risaykul-kɔntinɛnt infɔmeshɔn

• Fizik CPET trey sampul dɛn

• Trey ekstenal dimɛnshɔn dɛn

• Tray flange width ɛn sɔfayz kɔndishɔn

• Di kayn it ɛn di tin dɛn we dɛn de yuz fɔ it

• Fɔd filin tɛmpracha

• Chil ɔ frɔzɛn stɔrɔj ​​kɔndishɔn

• Maykrowev pawa ɛn tɛm fɔ ɔt

• Kɔnvɛnshɔnal ɔvin tɛmpracha ɛn tɛm fɔ kuk

• Rimov, pier, vent ɔ lɛf-on kuk rikwaymɛnt

• I izi fɔ pul, ɔt-rilis ɔ lɔk-sil rikwaymɛnt

• Existing film sampul ɔ target peel fɔs

• Anti-fog we dɛn nid

• High-barrier ɔ MAP rikwaymɛnt

• Target shelf layf

• OTR ɔ WVTR we dɛn nid we i de

• Rikwayd film tik

• Film wit ɛn rol lɔng

• Kor insay dayamita

• Maksimal rol ausayd dayamita

• Sial sayd wund insay ɔ na do

• Tray siling mashin manifakta ɛn mɔdel

• Kɔrɛnt siling tɛmpracha, prɛshɔn ɛn tɛm fɔ de

• Prodakshɔn spid

• Fim we dɛn print ɔ we dɛn nɔ print

• Atwok ɛn print ripit lɔng

• Dokumɛnt we dɛn nid fɔ gɛt fɔ kɔntakt it

• Ɔda kwantiti ɛn ɛni ia kɔnsɔmshɔn

• Di kɔntri we yu want fɔ go, di pɔt ɔ adrɛs usay dɛn de sɛn di tin dɛn

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt CPET Tray Sealing Film

Wetin dɛn mek wit CPET trey siling film?

CPET lidding film na tin we dɛn kin mek wit PET-based koted film, BOPET-coated film ɔ wan PET/PE laminate. Di ekzak strɔkchɔ dipen pan di trey, di kayn sil ɛn di ɔt we dɛn nid.

Wan film kin sial ɛvri CPET trey?

Nɔ, CPET trey frɔm difrɛn manifakta dɛn kin gɛt difrɛn fɔmyulashɔn, risaykul kɔntinyu, kɔtin ɛn flɛnch sɔfays. Dɛn fɔ tɛst di fim wit di rayt trey.

Us tiknes dɛn kin yuz fɔ CPET lidding film?

di kכmכn tiknes dεm na lεk 25–60 μm. HSQY kin evaluate sεlekt strכkchכ dεm bak frכm aprכksimatli 23–100 μm.

Us rol wit dɛn de?

Di standad wit we dɛn pik inklud 150 mm, 230 mm, 250 mm ɛn 280 mm. Kastom slit widths de akɔdin to di siling mashin ɛn mold.

Wetin na di standad rol lɔng?

Di HSQY prodak dɛm we dɛn dɔn pik de yuz wan standad 500-mita rol. Kastom rol lɔng dɛn kin prodyuz akɔdin to ikwipmɛnt ɛn rol-weyt limiteshɔn.

Yu tink se yu kin yuz CPET lidding film na maykrowev?

Dɛn kin yuz maykrowev-grɛd fim dɛn we dɛn dɔn pik afta dɛn dɔn validet di kɔmplit trey, fim, it ɛn rihit instrɔkshɔn dɛn.

Yu tink se dɛn kin yuz CPET siling film na kɔmɔn ɔvin?

Na wan fim nɔmɔ we dɛn mek spɛshal wan ɛn we dɛn dɔn tɛst fɔ di tɛmpracha we dɛn bin want fɔ gɛt na di ɔvin ɛn di tɛm we dɛn fɔ kuk. Standart kol ɔ maykrowev fim nɔ kin ɔtomɛtik ɔvin.

Yu tink se di fim kin de na di tre we dɛn de ɔt am?

Sɔm fim dɛn we yu kin ɔvin kin kɔntinyu fɔ atak we dɛn de ɔt, ɛn ɔda wan dɛn fɔ pul, chuk ɔ pul dɛn bak. Fɔ fala di instrɔkshɔn dɛn nɔmɔ we dɛn dɔn validet fɔ di fim ɛn it we yu dɔn pik.

Wetin na dual-ovenable lidding film?

Dual-ovenable film na film gred we dɛn validet fɔ ɔl tu di maykrowev ɛn kɔvɛnshɔnal-oven aplikeshɔn dɛn we dɛn yuz am wit kɔmpitabl trey ɛn it prodak.

Wetin na ɔt-rilis peel film?

Fim we de rilis di ɔt kin mek i gɛt sikrit sil we dɛn de kip am na kol ɛn i kin izi fɔ pul am afta dɛn dɔn ɔt di paket tru wan saykl we dɛn dɔn validet fɔ kuk.

Wetin na di difrɛns bitwin izi fɔ pul ɛn lɔk sil?

Easy-peel film na dizayn fɔ kɔntrol manual opin. Lɔk-sil fim de mek wan strɔng klos ɛn i kin nid fɔ kɔt ɔ pank.

Wetin mek di fim kin chɛr instead fɔ pul am klin?

Film tearing kin apin we di sil trɛnk tu ay, di film tu tin, di peel tab nɔ fayn ɔ di film dɔn pwɛl.

Wetin mek di paket balyɔn we dɛn de ɔt di maykrowev?

Stiam prɛshɔn de bil insay di paket we dɛn dɔn sial. Di paket kin nid fɔ pier, stim vent, kɔntrol film rilis ɔ difrɛn instrɔkshɔn fɔ ɔt.

Yu tink se dɛn kin yuz di fim fɔ it tin dɛn we dɛn dɔn frɔz?

Dɛn kin yuz sɔm friza-grɛd fim dɛn we dɛn dɔn pik afta dɛn dɔn tɛst di lɔw-tɛmpracha fleksibiliti, di sil intɛgriti, impak ɛn transpɔt pefɔmɛns.

Yu tink se yu kin yuz CPET lidding film fɔ MAP pak?

Yɛs, we dɛn jɔyn wan fayn fim we gɛt ay barɛri wit wan kɔmpatib ay-baria trey. Standart fim nɔ fɔ ɔtomɛtik trit am lɛk MAP fim.

Yu tink se anti-fɔg fim nid fɔ de?

Anti-fɔg fim kin fayn we kɔndenseshɔn go mɔs mek di it dɛn we dɛn dɔn kol we dɛn dɔn rɛdi ɔ prɔdak dɛn we dɛn pak we dɛn wam ɛn afta dat dɛn dɔn kol.

Di fim kin sial tru sos, ɔyl ɔ mɔstɔ?

Di gred dɛn we dɛn dɔn pik fɔ sidɔm wit kɔntaminɛshɔn kin ebul fɔ bia wit smɔl mɔstɔ ɔ gris, bɔt dɛn fɔ stil kip di trey flɛnch klin as i pɔsibul.

Wetin mek wan CPET paket we dɛn dɔn sial kin lik?

Di kɔmɔn tin dɛn we kin mek i apin na di flɛnch dɛn we gɛt dɔti, fim pankchɔ, chanɛl lik, trey we krak, wrinkles, kɔrɛkt silin paramita ɔ fim we nɔ kɔmpitabl.

Yu tink se dɛn kin print CPET silin fim bay kɔstɔm?

Yɛs. Yu kin print logo, it nem, instrɔkshɔn, barɔd, QR kɔd ɛn rɛjista mak akɔdin to di kɔstɔma in at wok ɛn rol layout.

HSQY kin kɔstɔmayz di peel trɛnk?

Pil trɛnk kin ajɔst akɔdin to di trey sɔfays, sil tɛmpracha, it aplikeshɔn ɛn kɔshɔma-opin rikwaymɛnt.

Yu tink se CPET trey siling film kin risaykul?

Risaykul dipen pan di film strɔkchɔ, trey kɔmbayn ɛn lokal risaykul infrastukchɔ. Multi-material PET/PE films nɔ de aksept bay ɛvri PET risaykul sistɛm.

Yu tink se CPET silin film biodegradable?

Kɔnvɛnshɔnal PET, BOPET ɛn PET/PE film dɛn nɔ fɔ diskrayb as biodegradable. Ɛni bayɔdegradabl klem nid fɔ gɛt sɛpret sɛtifiket matirial ɛn rɛkɔgnayz tɛst standad.

Wetin na di MOQ fɔ CPET trey silin film?

di rεfrεns MOQ na aprכksimatli 500–1,000 kg pan wan spεsifikεshכn. Fim dɛn we dɛn print, we gɛt ay barɛri ɛn we dɛn kin yuz spɛshal ɔvin kin nid difrɛn minim kwantiti.

Wetin na di prodakshɔn lida tɛm?

Di rɛfrɛns prodakshɔn tɛm na lɛk 10–20 wok dez afta dɛn dɔn kɔnfyus di fim strɔkchɔ, dimɛnshɔn, printin ɛn ɔda ditil dɛn.

A kin aks fɔ trial rol bifo mas prodakshɔn?

Trial film ɔ sampul rol dɛn kin tɔk bɔt fɔ sial, friz, maykrowev, ɔvin, pil, anti-fɔg ɛn prodakshɔn-layn tɛst.

Us tɛst dɛn fɔ dɔn bifo dɛn mek am fɔ kɔmɛshɔn?

Di tɛst dɛn we dɛn kin se na trey-film kɔmpitibliti, sil trɛnk, pil fɔs, lik, friz, thaw, maykrowev ɔt, ɔvin ɔt, stim rilis, fim intɛgriti, transpɔt ɛn it-kɔntakt validɛshɔn.

Rikwest wan CPET Trey Silin Film Kot

Yu de luk fɔ CPET trey siling film manifakta, ovenable lidding-film spɔlay, izi-pil rɛdi-mil film ɔ kɔstɔm print pak sɔlvishɔn?

Kɔntakt HSQY fɔ aks fɔ fim rɛkɛmɔndeshɔn, trayal rol, tɛknikal spɛsifikɛshɔn, kɔmpitabl CPET trey, kɔstɔm printin, silin-mashin sɔpɔt, faktri prayz ɛn intanashɔnal shiping infɔmeshɔn.

       Rikwest fɔ gɛt Kot