Yu de ya: Os » Pakɛj Silin Film dɛn » Sial Film fɔ PP Trey » BOPET Siling Film we dɛn kɔt fɔ PP Trey dɛn

BOPET Siling Film we dɛn kɔt fɔ PP Trey dɛn

HSQY de saplae coated BOPET lidding film fɔ PP trey dɛn insay izi-pil ɛn lɔk-sil gred fɔ rɛdi it, kol it, fresh prodɔkt, mit, sifud, dairy prodak ɛn ɔda it-pak aplikeshɔn.

di film kכnsis fכ wan strכng εn transparent BOPET bays wit wan fכnshכnal hεt-sil kכt we dεn divεlכp fכ kכmpatibl polypropylene siling surfaces. Dipen pan di kotin fɔmyulashɔn, di fim kin gi kɔntrol izi-pil opin ɔ wan strɔng pɔrmanent lɔk sil.

Bikɔs PP trey dɛn kin yuz difrɛn rɛsin gred, aditiv, risaykul kɔntinyu, barɛri layers ɛn flɛnch strɔkchɔ, di lid-film gred we dɛn dɔn pik fɔ tɛst wit di bayer in aktual tre ɛn siling ikwipmɛnt bifo kɔmɛshɔnal prodakshɔn.

Wetin Na BOPET Siling Film we dɛn kɔt ?

Koted BOPET lidding film na biaxial oriented polyester film wit wan funkshonal hεt-sil kotin we dεn aplay na wan sayd. Di BOPET bays de gi klia, glos, tɛnsiɛl trɛnk, dimɛnshɔnal stebiliti, pankchɔ rɛsistɛns, printabiliti ɛn rili wɛb handlin.

Di sayd we dɛn kɔt de gi di silin intarakshɔn wit di PP tre flɛnch. Difrɛn kɔtin kemistri dɛn kin divɛlɔp fɔ izi-pil, had-pil, lɔk-sil ɔ anti-fɔg pefɔmɛns.

Wan PP-kɔmpatibl kɔt BOPET fim difrɛn frɔm wan kɔvɛnshɔnal BOPET /CPP laminated film. Kɔt BOPET de gɛt in silin pefɔmɛns frɔm wan fɛnshɔnal sɔfayz kɔtin, we BOPET /CPP film de yuz wan sɛpret kas-pɔlipropilɛn silin layt we dɛn lamin to di BOPET ɔta layt.

Coated BOPET film Tayps fɔ PP Trey dɛn

Tayp fɔ Fim	Sil Pɔfɔmɛnshɔn	Di Aplikeshɔn dɛn we Dɛn Rikɔmɛnd	Sɔntin
Izi-Pil Kɔt BOPET film	Gi kɔntrol peel fɔs ɛn klin kɔshɔma opin wit ridyus tearing, shredding ɔ kɔtin rɛsɛdyu.	Chil rɛdi it, salad, dairy prodak, dɛzat, fresh prodɔkt ɛn kɔshɔma it pak.	Luk di fim we izi fɔ pul
Lɔk-Sil we dɛn kɔt BOPET film	Krio wan strɔng ɔ substantially nɔ-peelable sil fɔ impɔtant paket intɛgriti ɛn tamper ɛvidɛns.	Fɔd dɛn we gɛt likwid, sos, it dɛn we transpɔt-sɛnsitiv it, institiushɔnal pak ɛn sikyuɔr it pak.	Luk di fim we gɛt Lɔk-Sil

Izi-pil vs. Lɔk-Sil Lidding Film

Fim dɛn we izi fɔ pul ɛn lɔk-sil de yuz difrɛn kɔtin fɔmyulashɔn dɛn. Dɛn fɔ pik di kɔrɛkt opshɔn akɔdin to di ɛkspiriɛns we dɛn nid fɔ opin di kɔstɔma, di kayn it, di risk fɔ lik ɛn di kɔndishɔn fɔ distribyushɔn.

Kɔmpia	Fim we I izi fɔ Pil	Fim we gɛt Lɔk-Sil
Di we aw dɛn kin opin	Kontrol manual peeling frɔm di tre tab.	I kin nid fɔ kɔt, pank ɔ fɔ tear strɔng mɔ.
Kɔnsuma we izi fɔ yuz	Higher konsuma konvinyens en klin opin.	Lower opin konvinyens bɔt strɔng klos.
Paket sikyɔriti	Balans distribyushɔn sikyɔriti wit kɔshɔma peelabiliti.	Prioritiz di sil trɛnk, lik rɛsistɛns ɛn tamper ɛvidɛns.
Tipik prodakt dɛn	Salad, dɛzat, dairy prodak, kol it ɛn rital it pak.	Sos, it dɛn we gɛt likwid, it dɛn we gɛt transpɔt ɛn institiushɔnal pak.
Men validɛshɔn target	Peel initiation, peel propagation, klin rimobul ɛn limited rɛsɛdyu.	Sil trɛnk, lik rɛsistɛns, kɔtin ankɔrej ɛn paket intɛgriti.

Kot BOPET vs BOPET /CPP Lidin Film

Ɔl tu di kɔt BOPET ɛn BOPET /CPP film dɛn kin divɛlɔp fɔ PP trey dɛn , bɔt dɛn strɔkchɔ ɛn silin mɛkanism difrɛn.

Land	Di kɔt we dɛn kɔt BOPET film	BOPET /CPP Fim we de na di fim
Bildin	BOPET bays wit wan funkshɔnal sɔfayz kɔtin.	BOPET ɔta layt we dɛn lamin to wan CPP silin layt.
Mekanism fɔ sial	Di funkshɔnal kɔtin de bon to di kwalifay PP flɛnch.	Di CPP layt hεt-sil to di kwalifay PP ɔ modifyed-polyolefin flɛnch.
Sial opshɔn dɛn	I izi fɔ pul, had pil, lɔk sil ɛn anti-fɔg gred bay we dɛn de kɔt fɔmyulashɔn.	I izi fɔ pul ɔ lɔk sil akɔdin to di CPP silan fɔmyulashɔn.
Di tin we dɛn nid fɔ pik	Match di kotin kemistri to di aktual PP tre surface.	Match di CPP silant fɔmyulashɔn to di tre flɛnch ɛn prɔsesin kɔndishɔn dɛn.

Baya dɛn we de luk spɛshal fɔ wan laminated polypropylene siling layt kin rivyu wi BOPET /CPP lidding film rεnj.

Impɔtant Bɛnifit dɛn

PP-kompatibl kotin gred: Dɛn kin divɛlɔp fɛnshɔnal kɔtin fɔ kwalifay polypropylene siling sɔfays.
I izi fɔ pul ɛn lɔk-sil opshɔn dɛn: Pik kɔnsuma-frenli opin ɔ strɔng pɔrmanent sial.
Ay klia ɛn glos: Transparent BOPET sɔpɔt prodak visibiliti ɛn prɛmiɔm rital prɛzɛntɛnshɔn.
Mɛkanikal trɛnk: Di BOPET bays de gi tɛnsiɛl trɛnk, pankchɔ rɛsistɛns ɛn dimɛnshɔnal stebiliti.
Stebul mashinability: Film stiffness ɛn wɛb stebiliti sɔpɔt kɔmpatibl ɔtomɛtik ɛn sɛmi-ɔtomɛtik tre sila.
Opshɔnal anti-fɔg tritmɛnt: I de ɛp fɔ mek dɛn kɔntinyu fɔ si di prɔdak klia wan insay sɔm sɛlɛkɛt chill-fud aplikeshɔn dɛn.
Kastom printin: Yu kin ad logo, infɔmeshɔn bɔt di prɔdak, barɔd, QR kɔd, instrɔkshɔn ɛn ay mak.
Kastom rol kɔnvɔshɔn: Wid, lɔng, kɔr, wayndin dairekshɔn ɛn rol dayamita kin mach to di siling mashin.

Rifrɛns Spɛsifikeshɔn dɛn

Di valyu dɛn we de dɔŋ ya de sɔma di kɔrɛnt standad HSQY prodak rɛnj. Faynal garanti spesifikeshɔn dɛn fɔ kɔnfyus insay di aprɔv tɛknikal data sheet matirial , tre -kɔmpatibiliti tɛst ɛn bay spɛsifikɛshɔn.

Land	Standard ɔ Avaylabl Opshɔn	Notis we yu go pik
Di kayn prɔdak	Kot BOPET tre lid film	Rollstock fɔ kɔmpitabl tre -sial ikwipmɛnt
Base matirial	BOPET wit funkshɔnal ɔt-sil kɔtin	Kɔnfɛm di kɔtin kɔd, silin sayd ɛn PP kɔmpatibiliti
Sial opshɔn dɛn	I izi fɔ pul, had pil ɔ lɔk sil bay prɔjek	di sil bihayvya de ditarmin bay di kכt εn tre sεf
Rifrɛns tik	Aproksimayt 0.052–0.09 mm, we yu kin kɔstɔmayz	Konfam nominal gej ɛn tiknɛs tolɛreshɔn
Standart wit dɛn	180 mm, 320 mm, 400 mm ɛn 640 mm	di kכstכm wit dεm we de arawnd 150–900 mm de
Rifrɛns rol lɔng	Aprɔksimatli 500 m, we yu kin kɔstɔmayz	Dipen pan gej, wit, kɔr, rol wet ɛn maksimal ɔta dayamita
Aw a luk	Klia ɔ kɔstɔm print	Kɔnfɛm haz, glos, print kɔvarej, transparent winda ɛn ay mak
Anti-fɔg we de fɛt	Pɔsibul	Spɛsifik di anti-fɔg sayd, tɛmpracha, humiditi, di tɛm we i fɔ tek ɛn di we aw dɛn de tɛst am
Fɔ print	Fleksografik ɔ gravu printin bay prɔjek	Kɔnfɛm artwok, kɔlɔ, ripit lɔng, ay mak ɛn printin ɔryenteshɔn
Standart maykrowev raytin	Nɔ	Fɔ yuz maykrowev nid fɔ gɛt sɛpret kwalifay fim gred
Standart oven raytin	Nɔ	Nɔ yuz di standad gred fɔ kɔvɛnshɔnal-ɔvin aplikeshɔn dɛn
Standart friza raytin	Nɔ	Frɔzɛn aplikeshɔn dɛn nid fɔ validet lɔw tɛmpracha
Rifrɛns MOQ	Na lɛk 1,000 kg pan wan spɛsifikɛshɔn	Di kwantiti fɔ tray dipen pan di gred we de, di wit ɛn di we aw dɛn de print
Rifrɛns lida tɛm	Na lɛk 10–15 dez so	Kalkul afta spesifikeshɔn aprɔval ɛn dipɔsit

PP Tray Kompatibiliti fɔ di wok

Di wɔd 'PP tre ' de kɔba sɔm difrɛn tre strɔkchɔ dɛn. Di film fɔ mach wit di polima we dɛn prɛzɛnt pan di tre in silin flɛnch, nɔto jɔs to di jenɛral nem fɔ di tre .

Struktrɔ we di Trey dɛn de mek	Gaydɛns fɔ Kɔmpatibiliti	Fokus fɔ Validɛshɔn
Mono PP tre	Praymari aplikeshɔn fɔ wan kwalifay PP-kɔmpatibl kɔtin.	PP resin gred, aditiv, pigmɛnt, flɛnch jɔyometri ɛn sil winda.
PP/EVOH/PP tre wan dɛn we de wok.	May bi kompitibul wen di siling surface we dɛn prɛzɛnt pan di flɛnch na PP.	Flɛnch strɔkchɔ, sil kɔnsistɛns, pakej barɛri ɛn MAP pefɔmɛns.
PP/EVOH/PE tre	Kompatibiliti dipen pan if di flɛnch prɛzɛnt PP, PE ɔ ɔda modifyed silin layt.	Komplit layt strɔkchɔ ɛn aktual flɛnch-sɔfays aydentifikeshɔn.
Risaykul-kɔntinɛnt PP tre	Pɔtɛnɛshɛl kɔmpitabl, bɔt di risaykul rɛsin ɛn aditiv pakej kin afɛkt di silin bihayvya.	Lot kɔnsistɛns, flɛnch kɔntaminɛshɔn, sil trɛnk ɛn peel vɛryushɔn.
Pepabɔd we dɛn kɔt wit PP tre	Kompatibiliti dipen pan di polima kotin ɛn kɔtin wet na di flɛnch.	Pepabɔd distɔshɔn, kɔtin kɔntinyu, fayv tear ɛn sil trɛnk.

Aplikeshɔn dɛn

Chilled ready meals ɛn it dɛn we dɛn dɔn pripia
Fresh mit, bɔd ɛn sifud trey dɛn
Fresh prodɔkt, salad ɛn kɔt-frut pak
Dairy prodakt, chiz, dip ɛn dɛzat
Bekeri prodak ɛn snek pak
Sos ɛn it dɛn we dɛn dɔn pripia we gɛt wata
MAP trey dɛn wit wan kwalifay PP silin sɔfays
Food-service, ketɛnin ɛn institiushɔnal it pak dɛn

Fɔ ay-baria ɔ modifyed-atmosfɛs pak, di wan dɛn we de bay fɔ spɛsifa di ɔksijɛn-transmishɔn rit we dɛn nid, wata-vaypa-transmishɔn rɛt, gas miksɔp, target shelf layf ɛn kɔmplit tre strɔkchɔ. Wan standad kɔt BOPET fim nɔ fɔ ɔtomɛtik diskrayb as ay-baria fim.

Standart, Maykrowev ɛn Ritɔt Film Sɛlɛkshɔn

Standart koted BOPET film, maykrowev-rihitin film ɛn retortable film na difrɛn prodak kategori. Di pɔsin we bay fɔ pik di fim akɔdin to di kɔmplit tɛmral prɔses pas fɔ abop pan di PP tre matirial nɔmɔ.

Aplay fɔm	Di Fim Dairekshɔn we dɛn kin rɛkɔmɛnd	Impɔtant Notis
Ambient ɔ chilled it	Standart PP-kompatibl kot BOPET gred.	Kɔnfɛm di kayn sil, di kɔndishɔn fɔ kɔntakt it ɛn di tin dɛn we dɛn nid fɔ kip.
Maykrowev rihit	Separet kwalifay maykrowev-grɛd lidding film.	Validate di tre , film, kotin, ink, ventin we, it ɛn ɔt saykl.
Ritort sterilayzeshɔn we yu de du	PET/PA/RCPP retortable film ɔ ɔda kwalifay retort strɔkchɔ.	Standart koted BOPET film nɔto sɔbstityuyt fɔ retort film.
Ritort we gɛt ay barɛri	AlOx PET/PA/RCPP ɔ ɔda validet ay-baria rɛtɔt strɔkchɔ.	Spɛsifik OTR, WVTR, retort tɛmpracha, tɛm, prɛshɔn ɛn target shelf layf.

Fɔ ritort aplikeshɔn, rivyu wi PET/PA/RCPP retortable lidding film ɛn AlOx ay-baria retort film .

Aw fɔ Pik di Kɔrɛkt PP Trey Lidding Film

Di wan dɛn we de bay fɔ gi dɛn infɔmeshɔn ya bifo dɛn aks fɔ sampul ɔ kɔmɛnt kot:

PP tre spɔlayt, prodak kɔd, rɛsin gred, layt strɔkchɔ, drɔ ɔ fizik tre sampul.
Trey dimɛnshɔn, flɛnch wit, peel-tab dizayn, kɔmpatmɛnt layout ɛn tre kɔlɔ.
Rikwayd izi-pil, had-pil ɔ lɔk-sil pefɔmɛns.
Fɔd tayp, ɔyl kɔntinyu, asid, mɔstɔ, filin tɛmpracha ɛn pɔsibul flɛnch kɔntaminɛshɔn.
Ambient, chilled, frozen, maykrowev, retort ɔ ɔda tɛmal-prɔsesin kɔndishɔn dɛn.
Rikwayd anti-fɔg, ɔksijɛn barɛri, mɔstɔ barɛri, pɔrfɔreshɔn ɔ ventin pefɔmɛns.
Trey-siling mashin brand, mɔdel, tul kɔnfigyushɔn ɛn prodakshɔn spid.
Kɔrɛnt siling tɛmpracha, prɛshɔn ɛn tɛm fɔ de.
Rikwayd film tiknes, wit, rol lɔng, kɔr dayamita ɛn wayndin dairekshɔn.
Printin artwok, nɔmba fɔ di kɔlɔ dɛn, print ripit, ay mak ɛn transparent-window rikwaymɛnt.
Estimated oda kwantiti, anual dimand ɛn dilivri dɛstineshɔn.
Rikwayd fud-kɔntakt, maykreshɔn, kwaliti ɛn dɛstineshɔn-maket dɔkyumentri.

Silin ɛn Prodakshɔn-Layn Validɛshɔn

No singl siling tεmprachכ de we fit fכ εvri PP tre . Di prɛktikal silin winda dipen pan di kɔtin gred, tre -flɛnj matirial, mashin prɛshɔn, dwɛl tɛm, tul kɔndishɔn ɛn prodakshɔn spid.

Prɔblɛm we Kɔmɔn	I Posibul Kɔz	Chɛk we dɛn kin advays
Film nɔ de sial	Kɔrɛkt kɔtin, rɔng silin sayd, lɔw tɛmpracha, lɔw prɛshɔn ɔ shɔt tɛm fɔ de.	Kɔnfɛm di PP sɔfays, kɔtin kɔd, film ɔriɛnteshɔn ɛn silin paramita dɛn.
Peel fos tu hai	Plɛnti tɛmal input ɔ wan nɔ fayn izi-pil kɔtin gred.	Ridyus di tɛmpracha, prɛshɔn ɔ di tɛm we yu de de ɛn tɛst di kɔrɛkt kɔtin.
Peel fos tu low	Insufishɛnt siling tɛmpracha, prɛshɔn, tɛm fɔ de ɔ di kɔtin kɔmpatibiliti.	Inkris thermal input insay di apruv sil winda ɛn chɛk di tre sɔfays.
Film shreds we dɛn de opin	Di trɛnk we di peel gɛt pasmak, di film gej we nɔ fayn ɔ di peel-tab jɔyometri we nɔ fayn.	Rivyu di kotin, tiknes, peel angle ɛn tre -tab dizayn.
Sil we de lik	Fɔd kɔntaminɛshɔn, prɛshɔn we nɔ ivin, tul we dɔn pwɛl ɔ we nɔ kɔmplit di sil kɔntinyu.	Inspek flɛnch klin, tul alaynɛshɔn ɛn ɛvri siling kaviti.
Di wɛb trak we nɔ kɔrɛkt	Inkɔrɛkt wayndin, rol tɛnsiɔn, kɔr saiz, kɔfishin fɔ frikshɔn ɔ rol dayamita.	Konfam di rol spesifikeshɔn ɛn di mashin sɛtup.

Kastɔm BOPET Siling Film we dɛn kɔt

HSQY kin kɔstɔmayz kɔt BOPET liding film akɔdin to di kɔstɔma in PP tre , it prodak, siling ikwipmɛnt ɛn distribyushɔn rikwaymɛnt.

Kastom tik ɛn tik tolɛreshɔn
Kastom slit wit ɛn rol lɔng
Kastom kor dayamita ɛn maksimal rol dayamita
I izi-pil, had-pil ɛn lɔk-sil kɔtin gred dɛn
Opshɔnal anti-fɔg tritmɛnt
Kastom fleksografik ɔ gravy printin
Ay mak, kɔdin eria ɛn transparent winda dɛn
Maykroperforeshכn, makro pεrforeshכn כ aplikεshכn-spεsifi k vεntin
Tray kompitibiliti ɛn sil-strɛng tɛst
Kastom katon, rol lɛbl, palet mak ɛn ɛkspɔt pak

Wetin Mek Yu Pik HSQY?

Saplai fɔ PP trey dɛn , lidding film ɛn tre -siling ikwipmɛnt
Easy-peel ɛn lɔk-sil film opshɔn dɛn
Kastom rol kɔnvɔshɔn fɔ difrɛn silin mashin dɛn
Sɔpɔt fɔ fizik tre -sampul tɛst
Kastom printin ɛn anti-fɔg divɛlɔpmɛnt
Ekspɔt pak ɛn intanashɔnal delivri sɔpɔt

Rikwest PP Trey Lidding Film Samples

Send wi yu PP tre sampul, siling-mashin model, rikwayd sial tayp, rol dimɛnshɔn ɛn it aplikeshɔn. Wi tim go rikomɛnd wan fayn kɔt BOPET fim gred fɔ tɛst.

Rikwest fɔ kot di prayz

Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm

Wetin na kot BOPET lidding film fɔ PP trey dɛn ?

Na BOPET polyɛsta film wit wan funkshɔnal ɔt-sil kɔtin we dɛn divɛlɔp fɔ bon to wan kɔmpitabl PP tre flɛnch. Dipen pan di kɔtin, i kin gi izi-pil ɔ lɔk-sil pefɔmɛns.

Yu kin kot BOPET film sial ɛvri PP tre ?

Nɔ wan fim nɔ fɔ tek am se i de sial ɛvri PP tre . PP resin gred, risaykul kɔntinyu, pigmɛnt, slip ɛjɛn, barɛri layers ɛn flɛnch strɔkchɔ kin chenj silin bihayvya. Test wit di aktual tre nid fɔ de.

Wetin na di difrɛns bitwin fim we izi fɔ pul ɛn we dɛn kin lɔk?

Easy-peel film de gi kɔntrol manual opin ɛn klin film rimoval. Lɔk-sil film de mek wan strɔng ɛn sɔbstanshal nɔ-pil kloz fɔ aplikeshɔn dɛn we de prayoritayz lik rɛsistɛns ɛn pak intɛgriti.

Wetin na di difrɛns bitwin kɔt BOPET ɛn BOPET /CPP film?

Coated BOPET de yuz wan funkshonal surface coating fɔ mek di sil. BOPET /CPP na laminated strɔkchɔ we gɛt wan sɛpret CPP silin layt. Dɛn tu kin divɛlɔp fɔ PP trey dɛn , bɔt dɛn nid difrɛn spɛsifikɛshɔn ɛn tɛst.

Is standad koted BOPET film maykrowev sef?

Nɔ, di standad gred we de naw nɔ fɔ yuz am ɔtomɛtik fɔ mek maykrowev ɔt. Maykrowev aplikeshɔn dɛn nid fɔ gɛt sɛpret kwalifay gred ɛn kɔmplit pakej tɛst.

Yu kin yuz standad koted BOPET film fɔ retort pak?

Nɔ. Ritɔt prɔsesin nɔmal wan nid fɔ gɛt kwalifay strɔkchɔ lɛk PET/PA/RCPP ɔ ɔda rɛtɔt-grɛd fim we dɛn mek fɔ di tɛmpracha, tɛm ɛn prɛshɔn we dɛn dɔn spɛsifa.

Anti-fog koted BOPET film de?

Yɛs. Dɛn kin ad anti-fɔg tritmɛnt to di fim gred dɛn we dɛn dɔn pik. Di wan dɛn we de bay fɔ spɛsifa di stɔrɔj tɛmpracha, humiditi, anti-fɔg sayd, tɛst durayshɔn ɛn akseptans standad.

Yu tink se dɛn kin print di fim wit kɔstɔm dizayn dɛn?

Yɛs. Kastom printin kin inklud logo, grafik, instrɔkshɔn fɔ kuk, barɔd, QR kɔd, rɛjista mak, de-kɔd eria ɛn transparent winda.

Us tɛmpracha fɔ sial fɔ yuz?

No yunivasal silin tɛmpracha nɔ de. di korekt tεmprachכ dipכnt pan di kכt, PP tre sεf, prεshכn, dεlε tεm, tul εn prodakshכn spid. Di siling winda fɔ establish tru tɛst.

Us fim saiz dɛn de?

rεfrεns tiknes dεm na aprכksimatli 0.052–0.09 mm. di standad wit dεm inklud 180 mm, 320 mm, 400 mm εn 640 mm, wit kכstכm wit dεm we de arawnd 150–900 mm. Di rɛfrɛns rol lɔng na lɛk 500 m.

HSQY kin gi sampul fɔ sial tɛst?

Yɛs. Di wan dɛn we de bay kin gi wan PP tre sampul, tre drɔin, silin-mashin infɔmeshɔn ɛn di sil pefɔmɛns we dɛn nid. HSQY kin rεkomεnd wan fayn kכt BOPET gred fכ labכtכri εn prodakshכn-layn tεst.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?

Duya gi di PP tre matirial ɛn dimɛnshɔn, di kayn sil we dɛn nid, di we aw dɛn de yuz di it, di kɔndishɔn fɔ stɔrɔj, di we aw dɛn de ɔt, di dimɛnshɔn fɔ di fim, di kɔr saiz, di tin dɛn we dɛn nid fɔ print, di silin-mashin mɔdel, di kwantiti we dɛn ɛstimat ɛn di say we dɛn de sɛn am.

Di Kategori fɔ Prodakt