PVC Celuka Foam Bod fɔ Kabinɛt, Fɛnichɔ ɛn Fabrikɛshɔn
HSQY PLASTIC de mek ɛn saplae PVC Celuka fom bod fɔ kichin kabinɛt, batrum kabinɛt, fɔnicha, patishɔn, intɛriɔ dɛkɔreshɔn, wɔl panɛl, ɛgzibishin strɔkchɔ, sayn, printin ɛn industrial fabrikeshɔn.
PVC Celuka bod na wan rigid expanded PVC sheet we dɛn mek yuz di Celuka extrusion prɔses. in kכntribyushכn strכkchכ de kכmbayn wan fכm sεlyul kכr wit wan dεn, had כta skin , we de gi yusful bεlε fכ lכw wet, rigiditi, sכfayz hadnεs εn mashinability.
We yu kɔmpia am wit lɔwa-densiti fri-fom PVC shit, dɛn kin pik Celuka bod usay di prodak we dɔn dɔn nid fɔ gɛt mɔ sɔfays hadnɛs, bɛtɛ sɔpɔt fɔ mashin ɛn mɛkanikal fastɛns, ɛn inkris rigiditi fɔ kabinɛt ɔ panɛl dɛn we dɛn mek.
HSQY in kɔrɛnt PVC Celuka ɛn rilayt rigid PVC fom bod pɔtfɔlio kɔba lɛk 1–35 mm tiknɛs , density frɔm lɛk 0.35–1.0 g/cm3 , standad 1220 × 2440 mm / 4 × 8 ft shit ɛn big fɔmat dɛn we inklud 1560 × 3050 mm ɛn 2050 × 3050 mm.
Wetin Na PVC Celuka Fom Bod?
PVC Celuka fom bod , we dɛn kin kɔl bak PVC Celuka bod, Celuka PVC shit, PVC skinned fom bod ɔ rigid PVC fom bod , na wan ɛkspanda polyvinyl klorayd shit we dɛn mek yuz di Celuka ɛkstrushɔn prɔses.
We dɛn de prodyuz, dɛn kin kalibrayt di PVC fom matirial we dɛn dɔn ɛkstrud ɛn kol am kwik kwik wan na di say dɛn we dɛn de. dis de mek wan rεlatεv dense כta skin we de rawnd wan layt sεl insay.
Dis strɔkchɔ de difrɛns Celuka frɔm standad fri-fom PVC ɛn mek i rili impɔtant to kabinɛt mek, fɔnicha manifakta, intɛriɔ kɔntrakta ɛn fabricatɔ we nid ɔl tu wan laytwɛt bod ɛn wan had finished sɔfays.
Aw di Celuka Prɔses De Mek Wan Had Ɔta Skin?
Di difayn kכntribyushכn fכ Celuka tεknכlכji na kכntroled kol εn kalibrayshכn di tεm we dεn de εkstrushכn.
di sכfayz mεtirial de kol kwik kwik wan εn i de fכm wan kompakt skin we di insay mεtirial de mεnten wan fכm sεl strכkchכ.
So di bod we de kכmכt nכ de fכm yunifom frכm di sכfa to di kכr. Surface density ɛn hadness de ay pas di sɛnta, we de inflɔws routin, fastening, peint, laminating ɛn finished-panel rigidity.
PVC Celuka foam bord spesifikasi
| Sɔntin |
PVC celuka fom bord / pVC skinned fom bord |
| Tin dɛn |
Ekspand Rigid Polivinyl Klorayd / PVC |
| Bildin |
Sεlyul fכm kכr wit rili dense, had כta sεf dεm we di Celuka prכsεs de prodyuz |
| Tiknɛs we di Prodak-Famili gɛt naw |
aprכksimatli 1–35 mm dipכnt pan dεnsiti, shit dimεnshכn εn prodak spεsifikεshכn |
| Tiknɛs dɛn we dɛn dɔn sho |
3 mm, 4 mm, 5 mm, 8 mm, 12 mm, 15 mm ɛn 18 mm dɛn ripresent na di HSQY kategori we de naw |
| Di Densiti Rɛnj we de naw |
aprכksimatli 0.35–1.0 g/cm3 akraos di kכrant linked PVC fכm bכd prodakt famili; kɔnfɔm di Celuka gred we dɛn nid bay aplikeshɔn |
| Standart Sayz |
1220 × 2440 mm / lɛk 4 × 8 ft |
| Ɔda Sayz dɛn we de naw |
915 × 1830 mm, 1560 × 3050 mm ɛn 2050 × 3050 mm |
| Kɔlɔ dɛn |
Wait, blak, rɛd, yɔlɔ, blu, grɛn ɛn kɔstɔm kɔlɔ dɛn we de ɔnda di prɔdak spɛsifikɛshɔn |
| Sho |
Mat, glossy, smol ɔ aplikeshɔn-spɛsifi k finish surface dipen pan gred |
| Di we aw dɛn de du di wok |
Sawing, CNC routing, drɔlin, engraving, skru, nel, rivet, panch, day kɔt, sanding, peint, bond ɛn laminating |
| Men Aplikeshɔn dɛn |
Kabinɛt, fɔnicha, patishɔn, intɛriɔ dɛkɔreshɔn, wɔl panɛl, ɛgzibishin strɔkchɔ, sayn ɛn fabrik kɔmpɔnɛnt dɛn |
Wetin Mek Density Impɔtant We Yu Bay PVC Celuka Board
Tiknes nɔmɔ nɔ go du fɔ difayn PVC Celuka bod pefɔmɛns. Density na wan impɔtant B2B purchasing paramita bikɔs i de afɛkt bod wet, stiffness, mashin bihayvya, fastener sɔpɔt ɛn matirial kɔst.
| Density Direction |
Jɛnɛral Sɛlɛkshɔn Kɔnsidɛreshɔn |
| Di Density we de dɔŋ |
Ridyus di bod wet ɛn i kin fayn usay layt panɛl dɛn na di men prɔyoritɛt |
| Midul Densiti we dɛn kɔl |
Balans bod wet, rigiditi, mashin ɛn jenɛral kabinɛt ɔ displei pefɔmɛns |
| Di Densiti we Ay pas ɔl |
I kin gi big rigiditi ɛn impɔtant sɔpɔt fɔ mashin ɔ fastɛns, dipen pan bod kɔnstrɔkshɔn ɛn tik |
So di wan dɛn we de bay kabinɛt ɛn fɔnicha fɔ put ɔl tu di tik ɛn density insay ripit-ɔda spɛsifikɛshɔn instead fɔ bay ɔl bay di dimɛnshɔn fɔ di shit.
PVC Celuka Board fɔ Kichin Kabinɛt dɛn
PVC Celuka bod na tin we dɛn kin tek as laytwɛt ɔltɛrnativ to tradishɔnal wud-based panɛl fɔ sɔm sɛlɛkɛt kabinɛt kɔmpɔnɛnt dɛn.
I PVC strɔkchɔ we nɔ de mek di wata wet, yusful na kichin usay panɛl dɛn kin mit humidity, splash wan wan tɛm ɛn fɔ klin ɔltɛm.
Di had Celuka surface de sɔpɔt bak CNC routin, drɔlin, edj fabrication, peint ɛn kɔmpitabl dɛkɔretiv lamination.
Di wan dɛn we de mek di kabinɛt fɔ spɛsifa di panɛl dimɛnshɔn, di density, tik, di hinj ɛn skru ples, span we nɔ sɔpɔt, di domɔt dimɛnshɔn, di sɔfayz finish ɛn di dɛkɔretiv layt bifo dɛn pik di las bod.
PVC Celuka Bod fɔ Bathroom Kabinɛt dɛn
Bathroom cabinetry na ɔda big aplikeshɔn bikɔs PVC fom bod nɔ de biev lɛk wud-based bod we dɛn nɔ trit we i de pan mɔstɔ.
Di tin dɛn we dɛn kin yuz na di kabinɛt bɔdi, shelf, patishɔn, drɔwa kɔmpɔnɛnt ɛn dɛkɔretiv panɛl.
Finish kabinɛt pefɔmɛns stil dipen pan panɛl dizayn, jɔyn, hadwae, lod ɛn instɔleshɔn, so dɛn fɔ pik di density ɛn tiknes akɔdin to di aktual kɔmpɔnɛnt pas fɔ pik di aplikeshɔn nem nɔmɔ.
PVC celuka foam bord fo furniture
PVC Celuka bod kin mek am insay fɔnicha kɔmpɔnɛnt dɛn lɛk shelf, kabinɛt, patishɔn, displei yunit, stɔrɔj sistɛm ɛn intɛriɔ panɛl.
Di bod kin rout fɔ dɛkɔretiv profayl, drɔl fɔ hadwae, peint, laminated wit dɛkɔretiv film ɔ kɔmbayn wit ɔda matirial dɛn insay fabricated furniture structures.
Fɔ ebi shelf, big domɔt ɔ lod-bearing fɔnicha kɔmpɔnɛnt dɛn, di bod tik, density, riinfɔsmɛnt ɛn hadwae dizayn fɔ validet yuz di las kɔnstrɔkshɔn.
18mm PVC Celuka Bod fɔ Kabinɛt ɛn Fɛnichɔ
18mm PVC fom bod na kɔmɔn tik we pɔsin kin bay fɔ fɔnicha ɛn kabinɛt prɔjek usay dɛn nid bɔku panɛl tik.
HSQY in kɔrɛnt Celuka kategori inklud 18mm prodak fɔ fɔnicha ɛn printin aplikeshɔn.
Bɔt tu 18mm bod dɛn we gɛt difrɛn density ɔ intanɛnt strɔkchɔ kin wok difrɛn we. Baya dɛn fɔ difayn density, panɛl wet, skru rikwaymɛnt ɛn finish kɔmpɔnɛnt dimɛnshɔn togɛda wit nominal tiknɛs.
8mm ɛn 12mm PVC Celuka Bod
Midul-gej Celuka bod dɛn lɛk 8mm ɛn 12mm kin evalyu fɔ kabinɛt kɔmpɔnɛnt dɛn, patishɔn dɛn, displei dɛn, dɛkɔretiv panɛl dɛn, bak strɔkchɔ dɛn ɛn pat dɛn we dɛn mek.
Selekshɔn fɔ tink bɔt panɛl saiz we nɔ sɔpɔt, lod, we fɔ fast, edj mashin ɛn rigiditi we dɛn nid.
3mm ɛn 5mm PVC Celuka Bod
Tin 3mm, 4mm ɛn 5mm Celuka prodakt dɛn kin yuz fɔ dɛkɔretiv panɛl, sayn, ɛgzibishin strɔkchɔ, wɔl layn, bak panɛl ɛn aplikeshɔn usay lɔw wet impɔtant pas ebi strɔkchɔral lod.
HSQY naw de gi wan 2050 × 3050 mm Celuka prodak we spɛshal we gɛt 3mm, 4mm ɛn 5mm tiknes fɔ big-fɔmat rikwaymɛnt.
4 × 8 PVC celuka fom bord
1220 × 2440 mm , we dɛn kin kɔl lɛk 4 × 8 ft , na wan pan di men standad shit fɔmat dɛn na HSQY in kɔrɛnt PVC Sɛluka rɛnj.
Di fɔmat kɔmpitabl wit bɔku kabinɛt, fɔnicha, CNC-routing, printin ɛn jenɛral fabrikeshɔn wokflɔ.
Big-Fɔmat 1560 × 3050 ɛn 2050 × 3050mm Sɛluka Bɔd dɛn
Big-fɔmat PVC Celuka shit kin ridyus di sim ɛn impruv nesting efyushɔn fɔ ovasayz kabinɛt panɛl, patishɔn, wɔl panɛl, ɛgzibishin kɔmpɔnɛnt ɛn CNC-routed pat.
HSQY in kɔrɛnt prodak famili inklud 1560 × 3050 mm ɛn 2050 × 3050 mm shit fɔmat.
Big big sheet dɛn fɔ evalyu fɔ handel, palet dimɛnshɔn, mashin-bed saiz, kɔntena lod ɛn finish matirial yield bifo dɛn bay.
Skru Holdin ɛn Mɛkanikal Fastenin
Skru ɛn fastɛns pefɔmɛns impɔtant mɔ pan kabinɛt ɛn fɔnicha aplikeshɔn dɛn.
Celuka in rili dense ɔta skin kin gi bɛtɛ lokal sɔpɔt fɔ skru ɛn mɛkanikal fastɛns pas wan soft low-density fom surface, bɔt di aktual holding strength dipen pan density, tiknes, skru dizayn, payɔt-hol saiz, edj distans ɛn aplai lod.
Projɛkt dɛn we involv hinj, drɔwa slayd, shelf hadwae ɔ ripit opin saykl fɔ tɛst di fayn bod ɛn fastna kɔmbayn pas fɔ abop pan jenɛrik matirial diskrɔpshɔn nɔmɔ.
CNC Routing ɛn Mashin PVC Celuka Bɔd
PVC Celuka sheet kin prosɛs yuz bɔku kɔvɛnshɔnal plastic ɛn wud wok fabrikeshɔn we.
CNC routin we yu de yuz
Saw we dɛn de kɔt
Fɔ drɔl
Fɔ engraving
Fɔ panch
Die cutting fɔ di rayt tiknes
Sandin
Skru we yu de skru
Nailing
Rivetin we de mek pɔsin rivet
Bonding we gɛt fɔ du wit dɛnsɛf
Pentin
Laminating we dɛn kin yuz
Tul jɔyometri, fid rit ɛn spindl spid fɔ pik fɔ avɔyd fɔ ɔt pasmak, edj chip ɔ po sɔfa finish.
Yu tink se dɛn kin kɔt PVC Celuka Bod wit Laser?
Kɔnvɛnshɔnal lɛsa kɔt nɔ fɔ trit as di difɔlt prɔsesin we fɔ PVC.
We yu ɔt PVC, i kin mek yu gɛt kɔroziv ɛn denja dikɔmpɔzishɔn prɔdak ɛn i kin pwɛl di ikwipmɛnt dɛn we dɛn nɔ mek spɛshal fɔ PVC prɔsesin.
CNC routing, saw ɛn ɔda aprɔpriet mɛkanikal prɔses dɛn na jɔs bɛtɛ chus pas nɔmɔ dɛn yuz spɛshal sistɛm wit fayn ɛkstrakshɔn ɛn matirial-prɔsɛsin kɔntrol.
Peint PVC celuka foam bord
PVC Celuka surfaces kin peint fɔ furniture, dekorativ panɛl, sayn ɛn intɛriɔ aplikeshɔn.
Di pent adheshon dipen pan di spesifik bod safa, sand ɔ klin we, prayma, kɔtin kemistri ɛn di kɔndishɔn fɔ kɔrɛkt.
Di wan dɛn we de mek fɔnicha fɔ tɛst di kɔmplit kɔtin sistem pan wan prodakshɔn bɔd bifo dɛn spɛsifa wan kɔmɛshɔnal finish.
Laminating PVC celuka bord
Celuka bod dɛn kin bi sabstret fɔ dɛkɔretiv film ɛn ɔda kɔmpatibl sɔfays matirial dɛn.
Laminated kɔnstrɔkshɔn kin mek wud-greyn, sɔlid-kɔlɔ, mabul-ɛfɛkt ɔ ɔda dɛkɔretiv kabinɛt ɛn intɛriɔ sɔfays.
Adhesive kompitibiliti, surface pripia, lamination temperechur en dimenshonal stebiliti shud validet yuz di aktual dekorativ layt.
Fɔ dɔn dekɔret bod dɛn, rivyu wi bak PVC laminated foam bod dɛn.
PVC Celuka Bod fɔ Intɛriɔ Dekɔreshɔn
PVC Celuka fom bod kin yuz fɔ patishɔn, dɛkɔretiv panɛl, wɔl aplikeshɔn, displei strɔkchɔ, intɛriɔ kladin ɛn kɔstɔmayz akitekchral ɛlimɛnt dɛn.
I kɔmbayn lɔw wet ɛn rigid sɔfays kin mek am izi fɔ handle ɛn fabrication kɔmpia wit ebi ebi sɔlid plastic sheet.
Bil ɔ pɔblik-spɛs projɛkt dɛn fɔ kɔnfɔm sɛpret fɔ kɔnfɔm di aplikebul faya, strɔkchɔral ɛn lokal rigyuletɔri rikwaymɛnt dɛn.
PVC Celuka Bod fɔ Print ɛn Sayn
Smɔl Sɛluka sɔfays kin sɔpɔt sayn, skrin printin, engravin ɛn grafik aplikeshɔn dɛn bak.
Bɔt if di men tin we dɛn nid fɔ bay na layt dijital-print sayn pas kabinɛt ɔ strɔkchɔral fabrikeshɔn, wan lɔwa-densiti PVC Fri Fom Board kin fayn bak fɔ evaluate.
Di wan dɛn we de bay printin fɔ tɛst ink kɔmpatibiliti, waytnɛs, sɔfays smol ɛn flat we dɛn de yuz di rial printa ɛn ink sistem.
PVC celuka vs. PVC fri fom bord
| ficha |
PVC celuka bord |
pVC fri fom bod |
| Strukchɔ we dɛn de mek tin dɛn |
Fomed kor wit had, denser outa skin |
mכr yunifom εkspεnd sεl strכkchכ |
| Sɔfays Hadnɛs |
I ay bikɔs ɔf di kɔmpakt ɔda skin |
Softer fom surface |
| Di Tipik Prɔyoritɛd |
Kabinɛt, fɔnicha, had sɔfays ɛn fabrication |
Layt wet printin, sayn ɛn displei |
| CNC Routing we dɛn de yuz |
I fayn, bɔt tul fɔ akɔn fɔ di had sɔfayz skin |
Kɔmɔn izi fɔ rout ɛn shep fɔ displei fabrication |
| Mekanikal Fastening we dɛn kin yuz fɔ mek tin dɛn |
Bɔku tɛm dɛn kin lɛk am we skru ɛn hadwɔd sɔpɔt impɔtant |
Pɔfɔmɛnshɔn dipen strɔng wan pan di dens ɛn tik |
PVC Celuka vs. PVC Ko-Ekstrushɔn Fom Bod
| Ficha |
PVC Celuka Bod |
PVC Ko-Ekstrushɔn Bɔd |
| Fɔmeshɔn fɔ di Surface |
Kompakt surface we dɛn mek tru Celuka kol ɛn kalibreshɔn |
Separet denser כta layεr dεm we dεn kכ-ekstrud rawnd wan fכm kכr |
| Krɔs-Sɛkshɔn |
Smɔl smɔl transishɔn frɔm had sɔfays to fɔm kɔr |
Mɔ difrɛn sɔfa layers ɛn kɔr |
| Surface Pɔfɔmɛnshɔn |
Had surface we fit fɔ furniture ɛn fabrication |
Dɛn kin tink bɔt dens sɔfa layers usay prɛmiɔm sɔfays hadnɛs na prayoritɛd |
| Tipik Aplikeshɔn we dɛn kin yuz |
Kabinɛt, fɔnicha, patishɔn ɛn intɛriɔ fabrication |
Premium kabinɛt, fɔnicha ɛn dimand dɛkɔretiv panɛl aplikeshɔn dɛn |
Fɔ projɛkt dɛn we nid fɔ gɛt kɔ-ɛkstrud sɔfays strɔkchɔ, rivyu wi PVC Ko-Ekstrushɔn Fom Bod dɛn.
PVC Celuka Bod vs. Plywood ɛn MDF
| Sɛlɛkshɔn Fakta |
PVC Celuka Bɔd |
Wud-Bɛs Bɔd |
| Mɔstɔ Biɛvhɔ |
PVC strɔkchɔ gɛt lɔw wata absɔpshɔn |
Pɔfɔmɛnshɔn kin difrɛn bad bad wan wit di kayn wud, adhesive ɛn mɔstɔ-rɛsistant gred |
| We |
Sεlyul strכkchכ de ridyus dεnsiti kכmpεr wit sכlid PVC |
Dipen pan plai wud ɔ MDF gred |
| CNC Mashin we dɛn de yuz |
Routable, drillable ɛn mashinable |
Widely machinable wit wud wok ikwipmɛnt |
| Natural Wud Apɛndiks |
I nid fɔ peint, film ɔ dɛkɔretiv laminɛshɔn we yu want fɔ mek wud apin |
Plywood kin kip di natura wud apinans |
| Strukchɔral Sɛlɛkshɔn |
I fɔ disayn am akɔdin to di PVC fom density ɛn di bod stiffness |
I fɔ disayn am akɔdin to wud-panɛl gred ɛn strɔkchɔral prɔpati dɛn |
So dɛn fɔ diskrayb PVC Celuka as ɔda we fɔ yuz fayn kabinɛt ɛn fɔnicha , nɔto as yunivasal wan-to-wan riplesmɛnt fɔ ɛvri plai wud ɔ MDF strɔkchɔral dizayn.
Moisture Resistance of PVC Celuka Foam Bod
PVC Celuka bod gɛt lɔw wata absɔpshɔn we yu kɔmpia am wit bɔku wud-based bod dɛn we dɛn nɔ trit, we na wan rizin we dɛn kin tink bɔt am fɔ kichin, batrum, patishɔn ɛn intɛriɔ aplikeshɔn dɛn we kin gɛt mɔstɔ.
Di HSQY individyual Celuka prodak pej dɛm naw de list wata-absɔpshɔn valyu dɛm we go rich lɛk 1.5% fɔ di prodak dɛm we dɛn dɔn tɛst.
Dis valyu nɔ fɔ ɔtomɛtik aplay to ɛvri density ɛn fɔmyulashɔn. Projɛkt dɛn we gɛt kɔntrakt wata-absɔpshɔn rikwaymɛnt fɔ kɔnfɔm di ɛksaktɔl gred we dɛn dɔn tɛst.
Yuz na do ɛn UV Resistance
Mɔstɔ rɛsistɛns nɔmɔ nɔ de gi garanti fɔ mek di ɛkstirian wɛdabiliti we nɔ gɛt limit.
Di PVC Celuka projɛkt dɛn we de na do fɔ spɛsifa UV ɛksplɔshɔn, tɛmpracha rɛnj, kɔlɔ, di tɛm we dɛn de op fɔ savis, di we aw dɛn de mawnt ɛn di we aw dɛn nid fɔ kip di apinans.
Dɛn fɔ kɔnfyus wan ɛkstirian ɔ UV-stabiliz gred we dɛn de ɛkspɛkt fɔ gɛt lɔng tɛm san layt pas fɔ aplay ɔda klem fɔ ɛvri Celuka prodak.
Faya Pɔfɔmɛnshɔn fɔ PVC Celuka Bɔd
Sɔm wan wan HSQY PVC Celuka prodak dɛm de list di we aw dɛn de biev we dɛn de kil dɛnsɛf na dɛn tɛknikal data we dɛn gɛt naw, bɔt dɛn fɔ trit faya pefɔmɛns lɛk gred-, density-, tiknes- ɛn tɛst-spɛsifi k.
Nɔ ɔtomɛtik diskrayb di ɔl PVC Celuka kategori as fayapruf ɔ asaynd wan prɔdak in rizɔlt to ɛvri sheet.
Bil, transpɔt, ɛgzibishin ɛn pɔblik-spɛs projɛkt dɛn fɔ gi di tɛst we dɛn nid ɛn klasifikeshɔn so dat dɛn go kɔnfyus di prɔdak ripɔt we dɛn de yuz.
Kεmikכl Resistεns εn Klin
Rigid PVC de gi yusful resistans to bɔku wata-based kemikal ɛn klin ɛnvayrɔmɛnt, bɔt kemikal kɔmpatibiliti dipen pan kɔnsɛntreshɔn, tɛmpracha, ɛksplɔshɔn tɛm ɛn mɛkanikal strɛs.
Di wan dɛn we de bay di kabinɛt ɛn di industri fɔ tɛst agresiv klin, sɔlvɛnt ɔ prɔses kemikal dɛn agens di ɛksaktɔl bɔd ɛn sɔfays finish bifo dɛn gri fɔ am.
Yu tink se PVC Sɛluka Bɔd kin Tɛmofɔm?
PVC fom matirial dɛn kin shep thermally ɔnda fayn kɔndishɔn, bɔt tik Celuka kabinɛt bod dɛn nɔmal fɔ bay fɔs fɔ mashin ɛn fabrication pas fɔ dip-draw thermoforming.
Hɛt kin chenj sɔfayz skin, tiknɛs distribyushɔn ɛn dimɛnshɔn, so ɛni tɛmal fɔm rikwaymɛnt fɔ evalyu yuz di aktual bod gred ɛn pat jɔyometri.
Aw fɔ Pik di Rayt PVC Celuka Foam Bɔd
1. Difayn di Faynal Aplikeshɔn
Spɛsifik kichin kabinɛt, batrum kabinɛt, fɔnicha, patishɔn, wɔl panɛl, sayn, ɛgzibishin, printin ɔ ɔda aplikeshɔn we dɛn mek.
2. Kɔnfɛm If Sɛluka Na di Rayt Fom Strukchɔ
Pik Celuka we wan had ɔta sɔfa ɛn kabinɛt/fɔnicha fabrication pefɔmɛns na prayorities. Kɔmpia Fri Fom ɔ Co-Extruded bod usay dɛn difrɛn sɔfays strɔkchɔ dɛn bɛtɛ fit di aplikeshɔn.
3. Pik Tiknɛs
Selekt tiknes akɔdin to panɛl dimɛnshɔn, span we nɔ sɔpɔt, hadwae, lod ɛn finish-prɔdakt dizayn.
4. Spɛsifik di Density
Density fɔ inklud insay kabinɛt ɛn fɔnicha RFQ bikɔs i kin matirial afɛkt wet, rigiditi ɛn fastener pefɔmɛns.
5. Pik di Shit Sayz
Pik 915 × 1830 mm, 1220 × 2440 mm, 1560 × 3050 mm, 2050 × 3050 mm ɔ wan fɔmat we yu want bay di mashin saiz ɛn di yield we yu de kɔt.
6. Pik di Kɔlɔ
Wait na di mɔs kɔmɔn bays kɔlɔ. Wi kin tɔk bɔt blak ɛn ɔda kɔlɔ dɛn we dɛn dɔn kɔstɔmayt akɔdin to di prɔdak spɛsifikɛshɔn.
7. Difayn Surface Finish
Spɛsifik mat, glos ɔ ɔda say we dɛn nid ɛn if di bod go pent, print ɔ lamin.
8. Difayn CNC ɛn Ɛj Prɔsesin
Gi drɔin usay dɛn nid fɔ routin dip, engraving, grooves, hol ɔ dɛkɔretiv profayl.
9. Difayn di Fastener Rikwaymɛnt dɛn
Identify skru, hinj, drɔwa slayd, fastener pozishɔn ɛn ɛkspɛkt lod fɔ fɔnicha aplikeshɔn.
10. Difayn Lamination ɔ Peint
Gi dɛkɔretiv fim, adeziv, prayma, peint ɔ kɔtin rikwaymɛnt we sɔfayz finish na pat pan prodakshɔn.
11. Kɔnfɛm Yuz insay os ɔ na do
Ekstirian aplikeshɔn fɔ difayn UV ɛksplɔshɔn, tɛmpracha kɔndishɔn ɛn ɛkspɛkt savis layf.
12. Kɔnfɔm Faya ɛn Rigyuletɔri Rikwaymɛnt dɛn
Gi di ɛksaktɔl standad we dɛn nid, ripɔt ɔ di dɛstineshɔn-maket rikwaymɛnt bifo yu pik di prodakshɔn gred.
13. Apruv wan Prodakshɔn Sampul
Test tik, density, surface, kala, mashin, skru, peint ɔ lamination yuz yu aktual prodakshɔn prɔses bifo yu apruv wan kɔstɔmayz kɔmɛshɔnal ɔda.
Kastom pVC celuka bord manufakchurin
HSQY de sɔpɔt kɔstɔmayz PVC Celuka projɛkt fɔ kabinɛt manifakta, fɔnicha faktri, intɛriɔ kɔntrakta, kɔnstrɔkshɔn-matirial distribyushɔn, sayn manifakta ɛn plastic fabricatɔ.
Di tin dɛn we dɛn nid fɔ du fɔ di kɔstɔm kin inklud:
Tik we dɛn kin kɔstɔm
Kastom density we dɛn kin yuz
1220 × 2440 mm / 4 × 8 ft sheet dɛn
915 × 1830 mm sheet dɛn
1560 × 3050 mm big-fɔmat sheet dɛn
2050 × 3050 mm big-fɔmat sheet dɛn
Dimɛnshɔn dɛn we dɛn kɔt bay kɔstɔm
Wait PVC Celuka bord
Blak PVC Celuka bord
Ɔda kɔstɔm kɔlɔ dɛn
Mat surface na di wɔl
Glossy surface
Protektiv film usay dɛn nid am
CNC routin we yu de yuz
Drin ɛn engraving
Kɔt-to-sayz prɔsesin
Di tin dɛn we dɛn nid fɔ peint
Dekorativ lamination rikwaymɛnt dɛn
Di tin dɛn we dɛn nid fɔ print
Kastom ɛkspɔt pakej
Kwaliti Kontrol fɔ PVC Celuka Fom Bod
Impɔtant bay ɛn kwaliti-kɔntrol paramita dɛn kin inklud:
Tik ɛn tik tolɛreshɔn
Wid ɛn lɔng tolɛreshɔn
Tik
Weyt we di sheet gɛt
Di ɔta-skin kɔnsistɛns
Fom-sεl strכkchכ
Bod flatnɛs
Surface hadness usay dɛn spɛsifa am
Di we aw di wɔl de luk
Di kɔnsistɛns we di kɔlɔ dɛn gɛt
CNC routin kwaliti
Skru ɔ fastɛns pefɔmɛns usay dɛn nid am
Wata absɔpshɔn usay dɛn spɛsifa
Peint ɔ kɔtin adheshon usay nid de
Lamination adhesion usay dɛn nid am
Faya-tɛst pefɔmɛns usay dɛn spɛsifa wit kɔntrakt
Pak ɛn palet kɔndishɔn
Pak ɛn Intanɛshɔnal Shipin
PVC Celuka bod dɛn kin pak yuz fayn protɛktiv rap, kraft pepa, katon, film ɛn paletayz ɛkspɔt pak akɔdin to di sheet dimɛnshɔn ɛn di sɔfa we dɛn nid.
Big 1560 × 3050 mm ɛn 2050 × 3050 mm sheet dɛn nid fɔ pe atɛnshɔn mɔ to di we aw dɛn de handle, di dimɛnshɔn fɔ di palet ɛn di efyushɔn we dɛn de lod di kɔntena.
Fɔ di wan dɛn we de mek fɔnicha, fɔ pik di sheet saiz rawnd CNC nɛst patɛn kin ridyus ɔfkat ɛn lɔs di ifɛktiv matirial kɔst fɔ ɛni kabinɛt kɔmpɔnɛnt we dɔn dɔn.
Wetin Mek Yu Pik HSQY fɔ PVC Celuka Fom Bɔd?
Bɔku Tiknɛs Opshɔn dɛn: Di PVC Celuka kategori we HSQY gɛt naw inklud tin sheet dɛn tru 18mm kabinɛt prodak, we di brayt linked PVC fom pɔtfɔlio kɔba lɛk 1–35mm.
Density Selection: Dɛn kin ebul fɔ evaluate difrɛn density akɔdin to di kabinɛt wet, panɛl rigiditi, mashin ɛn fastɛns rikwaymɛnt.
4 × 8 ɛn Big Fɔmat: Di prɔdak dɛn we de naw gɛt 1220 × 2440 mm, 1560 × 3050 mm ɛn 2050 × 3050 mm sheet dɛn.
Fɔnicha ɛn Kabinɛt Aplikeshɔn: Sɛluka in had ɔta skin ɛn sɛlular kɔr de mek i fayn fɔ ɛvaluet insay kichin kabinɛt, batrum kabinɛt, shelf, patishɔn ɛn fɔnicha panɛl.
Machining Options: Sawing, CNC routing, drilling, engraving, fastening, painting ɛn lamination rikwaymɛnt dɛn kin inkɔrpɔret insay di prɔjek spɛsifikɛshɔn dɛn.
Bɔku PVC Fom Teknɔlɔji dɛn: HSQY de saplae bak PVC fri foam bod, PVC Ko-Ekstrushɔn Fom Bod ɛn PVC Laminated Foam Boards fɔ difrɛn printin, fɔnicha ɛn dɛkɔreshɔn rikwaymɛnt dɛn.
Infɔmeshɔn Nid fɔ wan PVC Celuka Bɔd Kɔt
| Aplay fɔm |
Kichin kabinɛt, batrum kabinɛt, fɔnicha, patishɔn, dɛkɔreshɔn, sayn ɔ ɔda aplikeshɔn |
| Fom Bod Tayp |
Celuka, Fri Foam, Co-Extruded ɔ rɛkɛmɔndeshɔn nid fɔ de |
| Tik we i tik |
Tik ɛn tolɛreshɔn we dɛn nid |
| Tik |
Rikwayd density, target shit wet ɔ kɔrɛnt rɛfrɛns sampul |
| Sayz fɔ di Shit |
915 × 1830, 1220 × 2440, 1560 × 3050, 2050 × 3050 mm ɔ kɔstɔm dimɛnshɔn dɛn |
| Kɔlɔ |
Wait, blak ɔ kɔstɔmayt kɔlɔ |
| Sho |
Mat, glos, pent-rɛdi, lamineshɔn sabstret ɔ ɔda sɔfays rikwaymɛnt |
| CNC Prɔsesin |
Fɔ kɔt, rout, engrav, grov, drɔ ɔ ɔda mashin rikwaymɛnt |
| Fɔ fastnɛs |
Skru, hinj, drɔwa-slayd ɔ ɔda hadwae rikwaymɛnt dɛn usay i apɔynt |
| Fɔ Finishin na di Surface |
Peint, printin, dɛkɔretiv fim ɔ lamination rikwaymɛnt dɛn |
| Savis Envayrɔmɛnt |
Kichin, batrum, insay, na do ɔ kemikal |
| Obe |
Rikwayd faya, envayrɔmɛnt ɔ dɛstineshɔn-maket tɛst rikwaymɛnt |
| Ɔmɔs |
Trayal kwantiti, rɛgyula bay bay kwantiti ɛn ɛstimat ɛni ia dimand |
| Usay yu de go |
Di kɔntri we dɛn de go ɛn di pɔt |
PVC celuka foam bord FAQ
Wetin na PVC Celuka fom bod?
PVC Celuka foam bod na wan expanded rigid PVC sheet we dɛn mek yuz di Celuka extrusion prɔses. I gɛt sɛlular fom kɔr ɛn i gɛt rili had, kɔmpakt ɔda say dɛn.
Wetin na wan ɔda nem fɔ PVC Celuka bod?
Dɛn kin kɔl am bak Celuka PVC sheet, PVC skinned fom bod, rigid PVC fom bod ɔ PVC Celuka fom sheet.
Wetin na di difrɛns bitwin PVC Celuka ɛn fri-fom PVC?
Sɛluka gɛt ɔda say dɛn we at pasmak we de rawnd wan kɔr we gɛt fom. Fri-fom PVC gɛt mɔ yunifom we dɛn dɔn ɛkspɛn sɛlul strɔkchɔ ɛn dɛn kin pik am fɔ layt printin ɛn sayn.
Wetin na di difrɛns bitwin Celuka ɛn kɔ-ɛkstrud PVC fom bod?
Seluka de divεlכp in kompakt sεf tru di Celuka kol εn kalibrayshכn prכsεs. Ko-ekstrud bod de yuz difrεnt denser כta layεr dεm rawnd di fכm kכr.
Celuka bod gud fo kichin kabinet?
Dɛn kin tink bɔt Celuka fɔ kichin kabinɛt bɔdi, shelf, panɛl ɛn ɔda kɔmpɔnɛnt dɛn bikɔs ɔf in PVC strɔkchɔ we nɔ de mek wata, rigid sɔfa ɛn mashinability. Faynal tik ɛn density fɔ pik fɔ di aktual kabinɛt dizayn.
PVC Celuka bod fit fo batrum kabinet?
Yɛs, dɛn kin yuz fayn gred dɛn fɔ di kɔmpɔnɛnt dɛn na di batrum kabinɛt ɛn ɔda tin dɛn we kin mek pɔsin wet insay di os. Hadway ɛn strɔkchɔral pefɔmɛns fɔ stil validet.
Us tik PVC Celuka bod dɛn kin yuz fɔ kabinɛt?
Kabinɛt tik dipen pan panɛl saiz, density, hadwae ɛn lod. HSQY de gi prodakt naw we inklud 8mm, 12mm, 15mm ɛn 18mm insay di big Celuka kategori.
HSQY de saplae 18mm PVC Celuka bod?
Yɛs. Di kategori we de naw inklud 18mm PVC fom prodak fɔ fɔnicha ɛn printin aplikeshɔn dɛn.
Us tiknes rɛnj HSQY de gi?
Kɔrɛnt linked HSQY PVC fom prodakt dɛn kɔba lɛk 1–35mm. Kɔnfɔm di Celuka density ɛn di sheet dimɛnshɔn dɛn we de fɔ di tik we dɛn nid.
Us density PVC Celuka bod a fɔ pik?
Densiti dipen pan di bod wet, stiffness, skru rikwaymɛnt, CNC mashin ɛn kɔst target. Di wan dɛn we de bay kabinɛt ɛn fɔnicha fɔ sho di dens ɛn tik.
HSQY de saplae 4 × 8 PVC Celuka sheet?
Yɛs. 1220 × 2440 mm, we na lɛk 4 × 8 ft, na wan pan HSQY in standad Sɛluka shit fɔmat dɛn.
HSQY de gi big-fɔmat PVC Celuka sheet dɛn?
Yɛs. Di prɔdak dɛn we de naw inklud 1560 × 3050 mm ɛn 2050 × 3050 mm fɔmat fɔ di rayt spɛsifikɛshɔn dɛn.
Us kɔlɔ dɛn de?
Na wayt na tin we dɛn kin gi. Di HSQY prodak spesifikeshɔn dɛn we de naw de list bak blak, rɛd, yɔlɔ, blu ɛn grɛn, wit kɔstɔm kɔlɔ dɛn we de fɔ fayn fayn prɔjek dɛn.
PVC Celuka bod kin ol skru?
Celuka bod kin skru ɛn mashin we dɛn kin fast am. Aktual holdin pefomans dipen pan bod density, tiknes, skru dizayn, payɔt ol, edj distans ɛn lod.
Yu tink se PVC Celuka bod kin bi CNC routed?
Yɛs. I kin bi CNC routed, dril ɛn engraved yuz aprɔpriet tul ɛn mashin kɔndishɔn.
Yu tink se dɛn kin peint PVC Celuka bod?
Yɛs. Dɛn kin peint di bod dɛn we fit afta dɛn dɔn pripia di say we dɛn de yuz fayn fayn wan ɛn kɔnfɔm se di kɔtin kɔmpitibliti.
Yu tink se dɛn kin laminate PVC Celuka bod?
Yɛs. Dekorativ film ɛn ɔda kɔmpitabl sɔfayz matirial dɛn kin laminate to Celuka bod yuz wan aprɔpriet adeziv ɛn prɔsesin sistem.
Yu tink se dɛn kin print PVC Celuka bod?
Yɛs. Yu kin yuz Smɔl Sɛluka sɔfays fɔ print ɛn sayn aplikeshɔn dɛn we fayn. Test di aktual printa ɛn ink sistem bifo dɛn gri fɔ di kɔmishɔn.
Yu tink se dɛn kin kɔt PVC Celuka bod wit laser?
Kɔnvɛnshɔnal lɛsa kɔt nɔ de rɛkɔmɛnd as di difɔlt we bikɔs fɔ ɔt PVC kin rilis kɔrosiv ɛn hazada dikɔmpɔzishɔn prɔdak dɛm. CNC routing ɔ mɛkanikal kɔt na jɔs mɔ aprɔpriet.
PVC Celuka fom bod nɔ de mek wata pas?
PVC Celuka bod nɔ gɛt bɔku wata ɛn i fayn fɔ bɔku say dɛn we gɛt mɔstɔ. Di pefɔmɛns fɔ di kabinɛt ɔ panɛl we dɔn dɔn dipen bak pan di jɔyn dɛn, hadwae ɛn instɔleshɔn.
Yu kin yuz PVC Celuka bod na do?
Dɛn kin ebul fɔ evalyu di rayt gred dɛn we de na do fɔ yuz dɛn na do. Fɔ yuz fɔ lɔng tɛm fɔ sho di UV ɛksplɔshɔn, tɛmpracha, kɔlɔ stebiliti ɛn di savis layf we dɛn nid.
PVC Celuka bod de mek faya nɔ faya?
Faya bihayvya na prodakt-spɛsifi k. Sɔm HSQY prodak dɛm de list sɛlf-ɛktinguish tɛst pefɔmɛns, bɔt wan rikwayd faya klasification fɔ kɔnfyus fɔ di ɛksaktɔ gred, density ɛn tiknes.
PVC Celuka bod kin tek ples fɔ plai wud?
I kin riples plai wud ɔ MDF insay sɔm sɛlɛkɛt kabinɛt, fɔnicha ɛn mɔstɔ-rɛsistɛns aplikeshɔn dɛn, bɔt dɛn nɔ fɔ trit am lɛk yunivasal strɔkchɔral riplesmɛnt. Lod, span, density, tiknes ɛn hadwae dizayn fɔ evalyu.
PVC Celuka bod fayn fɔ kemikal ɛnvayrɔmɛnt?
Rigid PVC de gi yusful resistans to bɔku kemikal dɛn, bɔt kɔmpatibiliti dipen pan di kayn kemikal, kɔnsɛntreshɔn, tɛmpracha ɛn di tɛm we dɛn de ɛkspos.
HSQY kin kot PVC Celuka bod to saiz?
Dɛn kin tɔk bɔt di kɔstɔm shit dimɛnshɔn ɛn di kɔt-to-sayz prɔsesin akɔdin to di bod tik, dɛnsiti, tolɛreshɔn ɛn kwantiti we dɛn bay.
A kin aks fɔ PVC Celuka bod sɛmpul dɛn?
Dɛn kin tɔk bɔt di sampul dɛn we de fɔ evaluate tiknes, density, surface, mashining, fasteners, peint ɔ lamination bifo bulk ɔda.
Us infɔmeshɔn a fɔ gi fɔ PVC Celuka kot?
Gi aplikeshɔn, tiknes, density, sheet saiz, kɔlɔ, sɔfays, CNC ɔ fastɛns rikwaymɛnt, peint ɔ lamination nid, kwantiti ɛn dɛstineshɔn.
Rikwest wan PVC Celuka Foam Bod Kot
Yu de luk fɔ wan rilibul PVC Celuka fom bod manifakta , PVC kabinɛt bod spɔlayt ɔ kɔstɔmayz rigid PVC fom shit fɔ fɔnicha, kabinɛt, intɛriɔ ɔ CNC fabrication?
Send HSQY yu rikwayd tiknes, density, shit dimɛnshɔn, sɔfa, aplikeshɔn ɛn ɛstimat bay bay kwantiti. Fɔ kabinɛt prɔjek, inklud panɛl dimɛnshɔn, skru ɔ hinj rikwaymɛnt ɛn dɛkɔretiv finish. If yu nɔ shɔ if Celuka, Free Foam ɔ Co-Extruded bod fit mɔ, gi di las aplikeshɔn so dat dɛn go ebul fɔ evalyu di bod strɔkchɔ.
