PVC Ko-Ekstrushɔn Fom Bɔd fɔ Fɛnichɔ, Kabinɛt ɛn Displei
HSQY PLASTIC de mek ɛn saplae PVC kɔ-ɛkstrushɔn fom bod fɔ fɔnicha, kichin kabinɛt, batrum kabinɛt, intɛriɔ dɛkɔreshɔn, wɔl panɛl, patishɔn, displei, sayn, printin, ɛgzibishin strɔkchɔ ɛn jenɛral plastic fabrikeshɔn.
Wan ko-ekstrud PVC fom bod de kombayn wan laytweit fom PVC kor wit denser ko-ekstrud PVC surface layers . Dis mכlti-layεr strכkchכ de gi wan smol sכft finish surface we i de rεtεn di wet-sεvin advantej dεm fכ wan sεlyul fכm kכr.
We yu kɔmpia am wit kɔvɛnshɔnal fri-fom PVC sheet matirial , dɛn kin jɔs pik kɔ-ɛkstrushɔn bɔd we di sɔfayz apinɛns, di skin hadnɛs, printin, laminɛshɔn, peint, CNC prɔsesin ɔ fɔnicha-grɛd finish na impɔtant tin dɛn we pɔsin nid fɔ bay.
HSQY in kɔrɛnt kɔ-ɛkstrud PVC fom bod prodak famili inklud standad 1220 × 2440 mm / 4 × 8 ft sheet matirial s togɛda wit big fɔmat, bɔku tiknɛs, density, kɔlɔ ɛn glos ɔ mat sɔfays opshɔn dɛn. Faynal spɛsifikɛshɔn dɛn fɔ kɔnfɔm akɔdin to di ɛksaktɔl bɔd strɔkchɔ, skin, dɛnsiti ɛn aplikeshɔn.
Wetin Na PVC Kɔ-Ɛkstrushɔn Fom Bɔd?
PVC ko-ekstrushɔn fom bod , we dɛn kin kɔl bak ko-ɛkstrud PVC fom bod, PVC ko-ɛkstrushɔn bod ɔ had-skin PVC fom bod , na wan mɔlti-layer ɛkspanda PVC sheet matirial we dɛn mek bay we dɛn ɛkstrud wan fom PVC kor togeda wit wan or mo denser PVC surface layers.
di layεr dεm de fכm tכgeda we dεn de prodyuz pas fכ ad leta as sεparat dεkorεtiv laminat.
Dis kɔnstrɔkshɔn de alaw di bod fɔ kɔba wan laytwɛt sɛlular intɛriɔ wit smol, rili dense ɛkstirian sɔfays dɛn we dɛn kin ɔptimayz fɔ apin, fɔ mek, fɔ print, fɔ peint ɔ fɔ lamin.
Aw Dɛn De Kɔnstrɔk Kɔ-Ɛkstrud PVC fom bod ?
wan tipik ko-ekstrud PVC fom bod kin כndastand am as layt strכkchכ:
| Layer |
Fכnshכn |
| Top Ko-Ekstrud PVC Skin |
I de gi wan smol finish surface ɛn i kin kɔntribyut to surface hadness, apinans, printin ɛn finishing pefɔmɛns. |
| Fomed PVC Kɔr |
Ridyus di ɔvala bod density ɛn wet we i de mentɛn yusful panɛl tik ɛn rigiditi. |
| Bottom Ko-Ekstrud PVC Skin |
kin gi sɛkɔn finish surface usay dɛn spɛsifa wan dabl-sayd kɔ-ɛkstrud strɔkchɔ. |
di kכnstrכkshכn fכ di skin, di kכr dεnsiti, di sכfayz apinεns εn di tכtal tiknes fכ trit am lεk sεparat pכyshכn paramita biכs difrεn kכ-εkstrud prodakt dεm kin yuz difrεn layεr strכkchכ dεm.
PVC Ko-Ekstrushɔn Fom Bɔd Spɛsifikeshɔn dɛn
| Sɔntin |
PVC Ko-Ekstrushɔn Fom Bɔd / Ko-Ɛkstrud PVC Fom Shit |
| Tin dɛn |
Ekspand rigid PVC wit ko-ekstrud PVC surface layers |
| Bildin |
Fomed PVC kor wit wan or tu denser ko-extruded PVC surface layers dipen pan spesifikeshɔn |
| Tiknɛs we di Prodak-Famili gɛt naw |
aprכksimatli 1–35 mm akraos kכrant HSQY kכ-εkstrud PVC fכm prodakt dεm; dediket prodakt dεm inklud bak 2–30 mm εn kabinεt-fכkus 16–20 mm opshכn dεm |
| Di Rifrɛns Densiti we de naw |
aprכksimatli 0.35–1.0 g/cm3 akraos di kכrant HSQY prodakt dεm; di fayn dεnsiti fכ kכnfכm fכ di skin εn kכr strכkchכ we dεn nid |
| Standart Sayz |
1220 × 2440 mm / lɛk 4 × 8 ft |
| Ɔda Sayz dɛn we de naw |
915 × 1830 mm, 1560 × 3050 mm ɛn 2050 × 3050 mm |
| Kɔlɔ dɛn |
Wait, blak, rɛd, yɔlɔ, blu, grɛn ɛn kɔstɔm kɔlɔ dɛn dipen pan di prɔdak spɛsifikɛshɔn |
| Sho |
Glos, mat, smol, kɔlɔ skin ɔ aplikeshɔn-spɛsifi k sɔfays |
| Di we aw dɛn de du di wok |
Saw kɔt, CNC routing, drɔlin, engraving, skru, nel, panch, bond, peint, printin ɛn laminating |
| Men Aplikeshɔn dɛn |
Fɛnichɔ, kabinɛt, wɔl panɛl, intɛriɔ dɛkɔreshɔn, displei, sayn, ɛgzibishin panɛl ɛn fabrik kɔmpɔnɛnt dɛn |
Mɛkanikal prɔpati, wata absɔpshɔn, faya pefɔmɛns, Vicat tɛmpracha ɛn kɔmplians dɔkyumentri fɔ kɔnfyus fɔ di ɛksaktɔ kɔ-ɛkstrud gred pas fɔ kɔpi frɔm difrɛn PVC fom bod kɔnstrɔkshɔn.
Singl-Sayd vs. Dabl-Sid Ko-Ekstrushɔn
Co-extruded PVC bod kin disayn wit difrɛn surface-layer arenjmɛnt dipen pan di finish prodak.
| Strukchɔ |
Tipik Sɛlɛkshɔn Dairekshɔn |
| Singl-Sid Ko-Ekstrushɔn |
dεn kin evaluate am usay nכmכ wan visible כ fכnshכnal sεf nid fכ dεn finish skin. |
| Dabl-Sayd Kɔ-Ɛkstrushɔn |
I fayn usay ɔl tu di say dɛn nid fɔ gɛt say we dɛn dɔn dɔn, lɛk kabinɛt domɔt, patishɔn, displei ɛn fɔnicha panɛl. |
| Dual-Kɔlɔ Kɔ-Ɛkstrushɔn |
I kin mek kɔntrast skin ɛn kɔr kɔlɔ ɔ prɔjek-spɛsifi k dɛkɔretiv ifɛkt usay di prɔdak we yu dɔn sɔpɔt sɔpɔt am. |
Glossy vs. Matte Co-Extruded PVC fom bod
| Surface |
Tipik Karakta |
Tipik Aplikeshɔn dɛn |
| Ay Glos we gɛt ay ay |
Brayt, smol dɛkɔretiv apinans |
Kabinɛt domɔt, displei, dɛkɔretiv panɛl ɛn prɛmiɔm intɛriɔ kɔmpɔnɛnt dɛn |
| Mat |
Ridyus glare ɛn soft apia |
Fɛnichɔ, wɔl panɛl, patishɔn, sayn ɛn intɛriɔ dɛkɔreshɔn |
| Kastɔm / Tekstɔr |
Projek-spɛsifi k dɛkɔretiv ɔ fɛnshɔnal finish |
Branded intɛriɔ, displei ɛn kɔstɔm fɔnicha prɔjek dɛn |
Kɔlɔ ɛn Dual-Kɔlɔ Kɔ-Ɛkstrud PVC Bɔd dɛn
Co-extrusion teknɔlɔji de alaw fɔ kɔntrol di surface appearance ɛn internal foam-core kɔnstrɔkshɔn separet wan fɔ suitable prodak.
Wait, blak ɛn ɔda kɔlɔ dɛn de riprizent insay HSQY in kɔrɛnt PVC fom bod rɛnj. Di kɔstɔm kɔlɔ rikwaymɛnt dɛn fɔ spɛsifa yuz wan aprɔv fizik sampul, Pantone rɛfrɛns ɔ ɔda kala standad we dɛn gri usay i apɔynt.
Fɔ dual-kɔlɔ projɛkt, spɛsifa di sɔfa kala we yu nid, kɔr kɔlɔ, edj apinans, bod tik ɛn fayn fabrikeshɔn we.
PVC Ko-Ekstrushɔn Fom Bɔd fɔ Kichin Kabinɛt
Kɔ-ɛkstrud PVC fom bod kin evalyu fɔ kichin kabinɛt bɔdi, kabinɛt domɔt, shelf, bak panɛl ɛn dɛkɔretiv kɔmpɔnɛnt dɛn.
Di laytwɛt fom kɔr de ridyus di bod wet, we di dens kɔ-ɛkstrud sɔfays kin gi wan mɔ finish apinans pas wan bɛsik fom sɔfays.
Di wan dɛn we de bay kabinɛt fɔ spɛsifa tik, dɛnsiti, skin strɔkchɔ, sɔfays finish, skru ɛn hinj ples, span we nɔ sɔpɔt, panɛl dimɛnshɔn ɛn dɛkɔretiv rikwaymɛnt bifo dɛn gri fɔ di matirial.
16mm, 18mm ɛn 20mm Kɔ-Ɛkstrud PVC Bɔd fɔ Fɛnichɔ
Tik ko-ɛkstrud PVC bod dɛn lɛk 16 mm, 18 mm ɛn 20 mm kin tink bɔt fɔ kabinɛt, wodrɔb, shelf ɛn fɔnicha aplikeshɔn usay dɛn nid bɔku panɛl tiknɛs.
Nominal tiknes nɔmɔ nɔ de difayn bod pefɔmɛns. Dɛn fɔ tink bak bɔt di density, di skin strɔkchɔ, di tik we di surface-layer tik, di dimɛnshɔn fɔ di panɛl, di dizayn fɔ di fastɛns ɛn di span we nɔ gɛt sɔpɔt.
PVC Ko-Ekstrushɔn Fom Bɔd fɔ Bathrum Kabinɛt dɛn
PVC fom bod dεn kin tink bכku tεm fכ batrum fכnicha εn vaniti kכmכpכnt dεm biכs di PVC strכkchכ gεt lכw wata absכpshכn kכmpεr wit bכku panεl dεm we dεn nכ trit wit wud-bεys.
Finished kabinɛt durabiliti stil dipen pan hadwae, jɔyn, adeziv, edj tritmɛnt, lod ɛn instɔleshɔn. So dɛn fɔ validet di kɔmplit kɔnstrɔkshɔn pas fɔ abop pan di raw bɔd nɔmɔ.
PVC Ko-Ekstrud Fom Bod fɔ Intɛriɔ Wɔl Panɛl dɛn
Smɔl kɔ-ɛkstrud sɔfays dɛn de mek dɛn bod ya fayn fɔ ɛvaluet insay intɛriɔ wɔl panɛl, dɛkɔretiv kladin, patishɔn, ɔtel intɛriɔ, rital spɛs ɛn kɔmɛshɔnal displei.
Di intɛriɔ kɔnstrɔkshɔn prɔjek dɛn fɔ sɛpret fɔ no di panɛl span, di we aw dɛn de fiks am, di impak we dɛn go ɛksplɔz, di dɛkɔretiv finish ɛn di tin dɛn we dɛn nid fɔ du wit faya ɔ bildin.
PVC Ko-Ekstrushɔn Bɔd fɔ Displei ɛn Ɛgzibishin
Kɔ-ɛkstrud PVC fom sheet matirial kin yuz fɔ ɛgzibishin wɔl, rital displei, pɔynt-ɔf-sɛl strɔkchɔ, displei panɛl, dimɛnshɔnal grafik ɛn fabricated prɔmoshɔnal kɔmpɔnɛnt dɛn.
Glos ɔ kɔlɔ sɔfays kin ridyus di amɔnt ɔf sɛkɔndari finish we dɛn nid fɔ sɔm displei aplikeshɔn dɛn, we CNC routin alaw kɔstɔmayz shep ɛn dizayn ditil dɛn.
PVC Ko-Ekstrushɔn Bɔd fɔ Dijital ɛn Skrin Printin
Smɔl wayt ɔ kɔlɔ kɔ-ɛkstrud sɔfays kin evalyu fɔ dairekt dijital printin, UV printin ɛn skrin printin.
Print pefɔmans dipen pan di ɛksaktɔs skin fɔmyulashɔn, sɔfayz ɛnaji, ink kemistri, di we aw dɛn de mɛn ɛn di sɛtin dɛn we di printa gɛt.
Krio printin aplikeshɔn dɛn fɔ tɛst di aktual prodakshɔn bɔd wit di ink sistem we dɛn want bifo dɛn gri fɔ di kɔmɛshɔnal.
Laminating Ko-Ekstrud PVC fom bod
Ko-ɛkstrud PVC fom bod kin sav as sabstret fɔ dɛkɔretiv film ɛn kɔmpitabl sɔfays matirial usay ɔda apinɛns ɔ funkshɔnaliti nid fɔ de.
Pɔtɛnɛshɛl finish matirial kin inklud PVC dɛkɔretiv film, fɔyl ɛn ɔda kɔmpitabl panɛl sɔfays.
Adhesive kemistri, prɛshɔn, tɛmpracha, sɔfa prɛparashɔn ɛn dimɛnshɔnal stebiliti fɔ ɛvaluet wit di aktual sɔfa sistɛm.
Fɔ prɔdak dɛn we dɛn dɔn gi wit wan finish dekɔretiv laminat, rivyu wi PVC Laminated Fom Bod dɛn .
Peint PVC Ko-Ekstrushɔn Fom Bɔd
Suitable co-extruded PVC surfaces kin peint fɔ fɔnicha, intɛriɔ, dɛkɔretiv ɛn displei aplikeshɔn.
di peint adheshon dipen pan di surface gloss, pripia, klin, prayma, kotin kemistri en curing kondishon.
Test di kɔmplit kɔtin sistɛm na di aktual prodakshɔn bɔd bifo yu apruv wan kɔmɛshɔnal spɛsifikɛshɔn.
CNC Routin ɛn Mashin Kɔ-Ɛkstrud PVC Bɔd
Kɔ-ɛkstrud PVC fom bod kin prosɛs yuz fayn plastic ɛn wud wok ikwipmɛnt.
Saw we dɛn de kɔt
CNC routin we yu de yuz
Fɔ drɔl
Fɔ mek tin dɛn we dɛn rayt
Grooving we yu de du
Fɔ panch
Sandin
Skru we yu de skru
Nailing
Mekanikal we dɛn kin yuz fɔ fast
Bonding we gɛt fɔ du wit dɛnsɛf
Pentin
Laminɛshɔn we dɛn kin yuz
CNC setin fɔ akɔn fɔ ɔl tu di dens sɔfa layt ɛn di lɔwa-dɛnsity fom kɔr so dat edj kwaliti ɛn sɔfa finish go kɔntinyu fɔ kɔnsistɛns.
Skru Holdin ɛn Hadwɔd Instɔlɛshɔn
Co-extruded surface layers kin gi yusful sɔpɔt rawnd skru ɛn hadwae, bɔt skru pefɔmɛns nɔ fɔ jɔj bay surface hadness nɔmɔ.
Skru pul-ɔut ɛn hinj pefɔmɛns dipen pan di totɛl bod tik, skin tik, kɔr dɛnsiti, skru dayamita, trɛd jɔyometri, payɔt ol, edj distans ɛn aplay lod.
Kabinɛt projɛkt dɛn we involv hinj, drɔwa slayd ɛn shelf dɛn we gɛt bɔku lod fɔ tɛst di aktual bod-ɛn-hadwɔd kɔmbaynshɔn.
4 × 8 PVC Ko-Ekstrushɔn Fom Bɔd
1220 × 2440 mm / aprɔksimatli 4 × 8 ft na wan pan di men standad fɔmat dɛn na HSQY in kɔrɛnt kɔ-ɛkstrud PVC fom bod rɛnj.
Dis sheet matirial saiz kɔmpitabl wit bɔku kabinɛt, printin, CNC-routin, displei ɛn fɔnicha prodakshɔn wokflɔ.
Big-Fɔmat PVC Kɔ-Ɛkstrud Fom Bɔd dɛn
Di HSQY prodak infɔmeshɔn we de naw inklud bak 1560 × 3050 mm ɛn 2050 × 3050 mm fɔmat fɔ fayn PVC fom bod spɛsifikɛshɔn dɛn.
Big-fɔmat sheet matirial s kin impruv nɛst efyushɔn ɛn ridyus jɔyn dɛn na ɔvasayz panɛl, fɔnicha kɔmpɔnɛnt, displei ɛn intɛriɔ strɔkchɔ.
Bayer dɛn fɔ tink bak bɔt CNC bed saiz, palet dimɛnshɔn, manual handling, kɔntena lod ɛn yuzable kɔt yield bifo dɛn pik di sheet matirial fɔmat.
PVC Ko-Ekstrushɔn vs. PVC Sɛluka Fom Bɔd
| Ficha |
Kɔ-Ɛkstrud PVC fom bod |
PVC Sɛluka Fom Bɔd |
| Fɔmeshɔn fɔ di Surface |
sεparat dεns PVC sεf layεr dεm de fכm tכgeda wit di fכm kכr tru kכ-εkstrushכn |
kompakt skin de divεlכp tru Celuka kol εn kalibrayshכn |
| Lay Strɔkchɔ |
Mɔ klia wan difayn skin-ɛn-kɔr mɔlti-layer kɔnstrɔkshɔn |
Denser surface we de transishכn tכwεd di sεlyul kכr |
| Aw a luk |
Strɔng opshɔn fɔ glos, kɔlɔ ɛn dɛkɔretiv finish sɔfays |
Kɔmɔn fɔ pik fɔ smol, had kabinɛt ɛn fabrication surfaces |
| Tipik Intɛnt fɔ Bay |
Prɛmiɔm apinans, dɛkɔretiv sɔfays, fɔnicha, displei, peint ɛn lamination |
Kabinɛt bɔdi, fɔnicha fabrication, mashin ɛn had-skin rikwaymɛnt |
If kabinet rigiditi, density ɛn kɔvɛnshɔnal Celuka mashin na di praymar rikwaymɛnt, rivyu wi bak PVC Seluka Fom Bod dɛn .
PVC Ko-Ekstrud vs. PVC Fri Fom Bod
| Ficha |
Ko-Ekstrud Bod |
Fri Fom Bod |
| Bil |
Multi-layer strɔkchɔ wit dens kɔ-ɛkstrud skin |
Fri-εkspεnd sεlyul PVC strכkchכ |
| Sho |
Denser skin wit strɔng dɛkɔretiv-finish pɔtnɛshɛl |
Layt wet fom surface optimized fɔ ikɔnomik printin ɛn displei yuz |
| Men Aplikeshɔn dɛn |
Fɛnichɔ, kabinɛt, dɛkɔretiv panɛl, displei ɛn prɛmiɔm sɔfays |
Dijital printin, sayn dɛn, ɛgzibishin ɛn laytwɛt displei panɛl dɛn |
Fɔ laytwɛt sayn ɛn printin aplikeshɔn usay wan multi-layer co-extruded skin nɔ nid, rivyu wi PVC Fri Fom Bod dɛn .
PVC Ko-Ekstrushɔn Bɔd vs. Laminɛt PVC fom bod
| Ficha |
Kɔ-Ɛkstrushɔn |
Laminɛt Fɔm Bɔd |
| Krieshɔn fɔ di Surface |
Surface layer de fכm di tεm we dεn de εkstrushכn |
Dɛn kin put dɛkɔretiv fim ɔ layt afta dɛn dɔn mek di fom bɔd |
| Di Tipik Apɛndiks |
Sɔlid kɔlɔ, glos, mat ɔ kɔ-ɛkstrud dɛkɔretiv skin |
Wud gren, mabul, ston, mɛtal, sɔlid kɔlɔ ɔ ɔda dɛkɔretiv fim |
| Di tin we yu fɔ pik fɔs |
Integreted surface pefomans ɛn layt PVC strɔkchɔ |
Dekorativ apinans we dɛn mek bay wan sɛkɔndari sɔfa layt |
Moisture Resistance ɛn Humid Envayrɔmɛnt dɛn
Ɛkspɛn rigid PVC gɛt lɔw wata absɔpshɔn we yu kɔmpia am wit bɔku wud-based matirial dɛn we dɛn nɔ trit, we na wan rizin we mek dɛn kin tink bɔt PVC fom bod fɔ kichin, batrum ɛn humid indo ɛnvayrɔmɛnt.
Finished-product moisture performance de dipen bak pan joyn, fasteners, adhesives, decorative layers ɛn ɔvala instɔleshɔn dizayn.
If dɛn nid fɔ gɛt kɔntrakt wata-absɔpshɔn limit, aks fɔ tɛst data fɔ di ɛksaktɔl kɔ-ɛkstrud spɛsifikɛshɔn pas fɔ aplay valyu dɛn frɔm ɔda PVC fom bɔd gred.
Di tin dɛn we dɛn nid fɔ du na do ɛn UV
PVC bod we nɔ de mek wata nɔ fɔ trit am ɔtomɛtik wan lɛk se i gɛt wan limit we nɔ gɛt limit we de mek di wɛda we de na do.
Di projɛkt dɛn we de na do fɔ sho di UV ɛksplɔshɔn, di tɛmpracha rɛnj, di kɔlɔ-ritɛnshɔn we dɛn nid, di we aw dɛn fɔ put am ɛn di tɛm we dɛn de op fɔ gɛt di savis.
Usay dɛn de ɛkspɛkt fɔ gɛt lɔng tɛm san layt, kɔnfɔm wan aprɔpriet ɔdasay ɔ UV-stabiliz fɔmyulashɔn ɛn tɛst rikwaymɛnt fɔ di ɛksaktɔl bɔd.
Faya Pɔfɔmɛnshɔn fɔ Kɔ-Ɛkstrud PVC fom bod
Faya pefɔmɛns fɔ trit as prodak-spɛsifi k.
Bod fכmyuleshכn, surface layers, tiknes, density εn tεst mεtכd כl kin infכlכw di risכlt.
If wan prɔjek nid UL 94, ASTM E84, EN 13501, GB 8624 ɔ ɔda patikyula standad, no di tɛst ɛn klasification we yu nid bifo yu pik di gred.
Kεmikכl Resistεns
Rigid PVC de gi yusful rεsistεns to plεnti kכmכn akyu kεmikכl dεm, bכt kεmikכl kכmpatibiliti fכ evaluate כnda di aktual savis kכndishכn dεm.
Gi di kemikal nem, kɔnsɛntreshɔn, ɔpreshɔn tɛmpracha, ɛksplɔshɔn durayshɔn ɛn mɛkanikal lod usay kemikal rɛsistɛns na impɔtant sɛlɛkshɔn krayteria.
Yu tink se Kɔ-Ɛkstrud PVC fom bod kin bi Tɛmofɔm?
tεmכl fכm fכ evaluate kכt fכ kכ-εkstrud fכm bכd biכs hεt kin afekt di rilayshכn bitwin di dεns sכfayz layεr dεm εn di sεlyul kכr.
Tik kabinɛt ɛn fɔnicha bod dɛn nɔmal fɔ pik fɔs fɔ kɔt, rout, fasten, peint ɛn lamination pas fɔ dip-draw thermoforming.
If yu nid fɔ bɛn ɔ fɔm wit ɔt, tɛst di ɛksaktɔl tik we di bɔd tik, di kɔnstrɔkshɔn fɔ di skin ɛn di pat jɔyometri bifo yu prodyuz am fɔ kɔmɛshɔn.
Yu tink se Kɔ-Ɛkstrud PVC Bɔd kin bi Laser Kɔt?
Kɔnvɛnshɔnal lɛsa kɔt nɔ fɔ trit as di difɔlt prɔsesin we fɔ PVC matirial dɛn.
Hɛt PVC kin mek kɔrosiv ɛn hazada dikɔmpɔzishɔn prodak ɛn i kin pwɛl di ikwipmɛnt dɛn we dɛn nɔ mek fɔ PVC prɔsesin.
CNC routing, saw ɛn ɔda aprɔpriet mɛkanikal we dɛn jɔs de yuz mɔ pas nɔmɔ dɛn yuz spɛshal PVC -prosɛsin ikwipmɛnt ɛn ɛkstrakshɔn sistem.
Aw fɔ Pik PVC Kɔ-Ɛkstrushɔn Fom Bɔd
1. Difayn di Aplikeshɔn
Spɛsifik fɔnicha, kabinɛt, kabinɛt domɔt, wɔl panɛl, displei, printin, ɛgzibishin, sayn ɔ ɔda las aplikeshɔn.
2. Kɔnfɛm If Kɔ-Ɛkstrushɔn I Rikwayd
chuz ko-ekstrushכn usay wan difrεnt dense sεf layεr, prεmiכm sεf apiyans כ layt skin-εn-kכr strכkchכ de bεnεfit.
3. Pik Singl-Said ɔ Dabl-Sayd Skin
Difayn if wan ɔ ɔl tu di fes dɛn nid di finish kɔ-ɛkstrud sɔfays.
4. Pik Tiknɛs
Selekt tiknes akɔdin to panɛl dimɛnshɔn, span we nɔ sɔpɔt, hadwae, mashin ɛn finish-prɔdakt lod.
5. Spɛsifik di Density
Densiti de inflɔws di wet, stiffnɛs, mashin bihayvya ɛn hadwae pefɔmɛns ɛn i fɔ inklud insay ripit-ɔda spɛsifikɛshɔn dɛn.
6. Difayn Surface Finish
Spɛsifik glos, mat, smol, tɛkstɔr ɔ ɔda say we yu nid.
7. Difayn Surface ɛn Kɔr Kɔlɔ dɛn
Fɔ bod dɛn we gɛt kɔlɔ ɔ tu kɔlɔ, sho di sɔfayz kɔlɔ, di kɔr kɔlɔ ɛn di edj we dɛn nid.
8. Pik di Shit Sayz
Pik 1220 × 2440 mm ɔ ɔda big fɔmat we de akɔdin to di mashin saiz, kɔt yield ɛn shiping rikwaymɛnt.
9. Difayn CNC ɛn Mashin Rikwaymɛnt
Gi drɔin fɔ routin, engraving, ol, grooves ɛn kɔt-to-sayz pat usay nid de.
10. Difayn di Hadwɔd Rikwaymɛnt dɛn
Kabinɛt projɛkt dɛn fɔ spɛsifa skru, hinj, drɔwa slayd, edj distans ɛn lod kɔndishɔn.
11. Difayn Printin, Peint ɔ Laminɛshɔn
Identify di finishing teknɔlɔji ɛn surface-adhesion rikwaymɛnt bifo yu pik di las skin.
12. Kɔnfɛm Indo ɔ Ɔda Kɔndishɔn
Di projɛkt dɛn we de na do fɔ no di UV we dɛn de ɛksplɔz, di tɛmpracha, di tin we dɛn nid fɔ kip di kɔlɔ ɛn di tɛm we dɛn de op fɔ tek di savis.
13. Kɔnfɔm Faya ɛn Kɔmplians Rikwaymɛnt
Gi di ɛksaktɔl tɛst standad we dɛn nid pas fɔ tek am se wan sɛtifiket de aplay to ɛvri tik ɛn fɔmyulashɔn.
14. Test di Prodakshɔn Sampul
Evaluate surface, kala, density, mashining, skru, printin, peint ɔ lamination bifo yu apruv wan kɔstɔmayz kɔmɛshɔnal prodakshɔn rɔn.
Kastom PVC Ko-Ekstrushɔn Fom Bɔd
HSQY de sɔpɔt kɔstɔmayz kɔ-ɛkstrud PVC fom bod projɛkt fɔ fɔnicha manifakta, kabinɛt faktri, intɛriɔ kɔntrakta, sayn kɔmni, displei manifakta, distribyushɔn ɛn plastic fabricatɔ.
Di tin dɛn we dɛn nid fɔ du fɔ di kɔstɔm kin inklud:
Kastom bod tiknɛs
Kastom kor density we yu kin yuz
Singl-sayd ɔ tu-sayd kɔ-ɛkstrushɔn
Kastom surface-layer rikwaymɛnt dɛn
1220 × 2440 mm / 4 × 8 ft sheet matirial s
Big-fɔmat sheet matirial s
Dimɛnshɔn dɛn we dɛn kɔt bay kɔstɔm
Wait surface
Blak surface
Kastom kɔlɔ dɛn
Dual-kɔlɔ skin ɛn kɔr opshɔn fɔ fayn prɔdak dɛn
Sɔfays we gɛt ay glos
Mat surface na di wɔl
Kastɔm tɛkstɔr
Di tin dɛn we dɛn nid fɔ print dijital
Di tin dɛn we dɛn nid fɔ print na skrin
Di tin dɛn we dɛn nid fɔ peint
Dekorativ-film laminashɔn
CNC routin we yu de yuz
Drin ɛn engraving
Kɔt-to-sayz prɔsesin
Kastom ɛkspɔt pakej
Kwaliti Kɔntrol fɔ Kɔ-Ɛkstrud PVC fom bod
Impɔtant kwaliti-kɔntrol ɛn bay paramita dɛn kin inklud:
Oval tik ɛn tolɛreshɔn
Shit wit ɛn lɔng
Bɔd dɛnsiti
Weyt we di sheet gɛt
Skin-layer kɔnsistɛns
Kor-sεl kכnsistεns
Layer bonding we yu de yuz
Bod flatnɛs
Surface gloss ɔ mat apinans
Difɛkt dɛn we de na di wɔl
Di kɔnsistɛns we di kɔlɔ dɛn gɛt
Edj apinans fɔ dual-kɔlɔ prɔdak dɛn
CNC mashin kwaliti
Skru pefɔmɛns usay dɛn spɛsifa am
Printing adhesion usay dɛn spɛsifa am
Peint adhesion usay dɛn spɛsifa am
Lamination adhesion usay dɛn spɛsifa
Wata absɔpshɔn usay dɛn spɛsifa wit kɔntrakt
Faya pefɔmɛns usay dɛn spɛsifa wit kɔntrakt
Pak ɛn palet kɔndishɔn
Pak ɛn Intanɛshɔnal Shipin
PVC ko-ekstrushɔn fom bod dɛn kin protɛkt yuz fayn film, kraft pepa, katon, edj protɛkshɔn ɛn paletayz ɛkspɔt pak akɔdin to sheet matirial dimɛnshɔn ɛn sɔfays rikwaymɛnt.
Di say dɛn we gɛt ay glos ɛn we dɛn de drɛs kin nid fɔ gɛt ɔda tin dɛn fɔ protɛkt di say dɛn fɔ mek dɛn nɔ skrach we dɛn de ol ɛn transpɔt.
Baya dɛn we de ɔda big-fɔmat sheet matirial s fɔ tink bɔt di palet dimɛnshɔn, kɔntena lod, ɔndo ikwipmɛnt ɛn CNC nɛst yield bifo dɛn kɔnfɔm di fayn sheet matirial fɔmat.
Wetin Mek Yu Pik HSQY fɔ PVC Kɔ-Ɛkstrushɔn Fom Bɔd?
Multi-Layer PVC Foam Options: HSQY de saplae co-extruded bod wit dense surface layers ɛn laytwɛt fom kor fɔ furniture, displei ɛn dekorativ fabrication.
Bɔku Tiknɛs: Di prɔdak dɛn we de naw inklud tin displei bod dɛn tru tik kabinɛt ɛn fɔnicha panɛl dɛn.
4 × 8 ɛn Big Fɔmat: PVC fom prodak dɛm we de naw inklud 1220 × 2440 mm, 1560 × 3050 mm ɛn 2050 × 3050 mm fɔmat.
Glossy ɛn Matte Surfaces: Difrɛn surface finish kin sɔpɔt kabinɛt, fɔnicha, printin ɛn displei aplikeshɔn dɛn.
Kɔlɔ ɛn Dɛkɔretiv Opshɔn dɛn: Dɛn kin tɔk bɔt sɔfays ɛn kɔr kɔlɔ dɛn akɔdin to di prɔdak strɔkchɔ we dɛn nid.
Prosesin Sɔpɔt: Dɛn kin put CNC routin, kɔt, drɔlin, engraving, peint, printin ɛn lamination rikwaymɛnt dɛn insay di spɛsifikɛshɔn fɔ bay.
Kɔmplit PVC fom bod Pɔtfɔlio: Di wan dɛn we de bay kin kɔmpia PVC Fri Fom Bod, PVC Sɛluka Fom Bɔd, PVC Ko-Ekstrushɔn Fom Bɔd ɛn PVC Laminated Foam Board akɔdin to di sɔfa, strɔkchɔ ɛn fayn aplikeshɔn.
Infɔmeshɔn Nid fɔ wan PVC Kɔ-Ɛkstrushɔn Bɔd Kɔt
| Aplay fɔm |
Kabinɛt, fɔnicha, wɔl panɛl, displei, printin, sayn, ɛgzibishin ɔ ɔda aplikeshɔn |
| Bɔd Strukchɔ |
Singl-sayd kɔ-ɛkstrushɔn, dɛbul-sayd kɔ-ɛkstrushɔn ɔ rɛkɛmɔndeshɔn nid fɔ de |
| Tik we i tik |
Rikwayd ɔvala tik ɛn tolɛreshɔn |
| Tik |
Rikwayd density, target sheet matirial wet ɔ existing rɛfrɛns sampul |
| Sayz fɔ di Shit |
1220 × 2440 mm, big fɔmat ɔ kɔstɔmayz dimɛnshɔn |
| Skin Kɔlɔ |
Wait, blak, kɔstɔm kɔlɔ ɔ fizik sampul |
| Kor Kɔlɔ |
Di sem kɔlɔ, difrɛn kɔlɔ ɔ prɔjek-spɛsifi k rikwaymɛnt |
| Sho |
Ay glos, mat, smol ɔ kɔstɔm sɔfays |
| CNC Prɔsesin |
Fɔ kɔt, rout, engrav, drɔ, grov ɔ kɔt-to-sayz rikwaymɛnt |
| Hadwɔd we dɛn kin yuz |
Skru, hinj, drɔwa-slayd ɔ ɔda tin dɛn we yu nid fɔ fast |
| Fɔ Finishin na di Surface |
Print, peint, vaynil, dɛkɔretiv fim ɔ laminɛshɔn |
| Savis Envayrɔmɛnt |
Insay os, humid indo, protɛkt ɛkstirian ɔ dairekt ɔdasay ɛksplɔshɔn |
| Obe |
Rikwayd faya, envayrɔmɛnt, kemikal ɔ dɛstineshɔn-maket tɛst rikwaymɛnt |
| Ɔmɔs |
Trayal kwantiti, rɛgyula bay bay kwantiti ɛn ɛstimat ɛni ia dimand |
| Usay yu de go |
Di kɔntri we dɛn de go ɛn di pɔt |
PVC Ko-Ekstrushɔn Fom Bɔd FAQ
Wetin na PVC ko-ekstrushɔn fom bod?
PVC ko-ekstrushכn fom bod na mכlti-layer εkspεnd PVC sheet matirial wit laytwεt fכm kכr εn wan כ mכr dens PVC sכfayz layεr dεm we fכm tכgeda we dεn de εkstrushכn.
Wetin na ɔda nem fɔ PVC kɔ-ɛkstrushɔn bɔd?
Dɛn kin kɔl am bak kɔ-ɛkstrud PVC fom bɔd, PVC kɔ-ɛkstrud bɔd, had-skin PVC fom bɔd ɔ mɔlti-layer PVC fom sheet matirial .
Aw many layers co-extruded PVC fom bod gɛt?
Bɔku prɔdak dɛn de yuz tri-layer kɔnsɛpt wit fom kɔr bitwin tu dens sɔfays, bɔt dɛn kin prodyuz singl-sayd ɛn ɔda prɔjek-spɛsifi k strɔkchɔ dɛn bak. Kɔnfɛm di rayt kɔnstrɔkshɔn fɔ di prɔdak we yu dɔn pik.
Wetin na di difrɛns bitwin kɔ-ɛkstrushɔn ɛn Sɛluka PVC bɔd?
kכ-εkstrushכn de mek difrεn dεn sכfayz layεr dεm tכgeda wit wan fכm kכr. Seluka de divεlכp wan kompakt skin tru kol εn kalibrayshכn di tεm we di Celuka εkstrushכn prכsεs de.
Wetin na di difrɛns bitwin kɔ-ɛkstrushɔn ɛn fri-fɔm PVC bɔd?
Ko-ekstrushɔn gɛt dens sɔfays layers rawnd wan fom kɔr, we fri-fom bod de yuz wan mɔ dairekt ɛkspɛnd sɛlular strɔkchɔ ɛn dɛn kin pik am fɔ ikɔnomik printin ɛn sayn.
Yu tink se kɔ-ɛkstrud PVC bod fayn fɔ kichin kabinɛt?
Dɛn kin evalyu fayn kɔ-ɛkstrud bod dɛn fɔ kichin kabinɛt, kabinɛt domɔt, shelf ɛn rilat fɔnicha kɔmpɔnɛnt dɛn. di tik, di dens, di skin strכkchכ εn di hadwae we dεn nid fכ kכnfכm.
Yu tink se kɔ-ɛkstrud PVC fom bod fayn fɔ batrum kabinɛt?
Yes, yu kin yuz fayn prodak fɔ batrum vaniti ɛn kabinɛt aplikeshɔn usay wan mɔstɔ-rɛsistant PVC kɔnstrɔkshɔn yusful. Finished-cabinet pefɔmans dipen pan di kɔmplit dizayn ɛn hadwae.
HSQY de saplae 18mm ko-ekstrud PVC bod?
Yɛs. HSQY in kɔrɛnt kɔ-ɛkstrushɔn prodak famili inklud 16mm ɛn 18mm kabinɛt-fɔs bod dɛn ɛn ɔda tiknes dɛn.
Us tiknes HSQY de saplae?
di HSQY ko-ekstrushכn prodakt dεm we de naw inklud lεk 1–35 mm akraos di wayda prodakt famili, wit dεdiket prodakt dεm we dεn de mכket bak insay rεnj dεm lεk 2–30 mm. Faynal avaylabl dipen pan di bod strɔkchɔ, density ɛn saiz.
HSQY de saplae 4 × 8 ko-ekstrud PVC fom bod?
Yɛs. 1220 × 2440 mm, we na lɛk 4 × 8 ft, na wan pan di men fɔmat dɛn we de na HSQY in kɔrɛnt kɔ-ɛkstrud PVC fom bod rɛnj.
Big-fɔmat PVC kɔ-ɛkstrushɔn bɔd dɛn de?
Di HSQY prodak spesifikeshɔn dɛn we de naw inklud bak fɔmat dɛn lɛk 1560 × 3050 mm ɛn 2050 × 3050 mm fɔ fayn prodak dɛn.
Us kɔlɔ dɛn de?
Di prɔdak dɛn we de naw gɛt wayt ɛn bɔku kɔlɔ opshɔn dɛn. Dɛn fɔ kɔnfyus di kɔstɔm kɔlɔ dɛn akɔdin to di sɔfayz strɔkchɔ, di kɔr kɔlɔ, di tik ɛn kwantiti.
Yu tink se di skin ɛn di fom kɔr kin gɛt difrɛn kɔlɔ?
Dual-kɔlɔ kɔ-ɛkstrud strɔkchɔ dɛn kin ebul fɔ evaluate fɔ fayn prodakt dɛn. Spɛsifik di skin kɔlɔ we yu nid, di kɔr kɔlɔ ɛn di edj we dɔn dɔn.
Yu tink se ay-glos kɔ-ɛkstrud PVC fom bɔd de?
Yɛs. HSQY naw de list wan ay-glos tri-layer ko-ekstrud PVC fom bod insay dis prodak kategori.
Yu tink se dɛn kin print kɔ-ɛkstrud PVC bod dijital wan?
Dɛn kin ebul fɔ evalyu fayn fayn smol say dɛn fɔ dijital ɛn UV printin. Test ink adheshon en apinans pan di ekzak prodakshon surface bifo bulk oda.
Yu tink se dɛn kin print kɔ-ɛkstrud PVC fom bɔd?
Yɛs. Dɛn kin print di rayt say dɛn na di skrin afta dɛn dɔn kɔnfyus di ink sistem ɛn di sɔfays kɔmpitibliti.
Yu tink se dɛn kin peint kɔ-ɛkstrud PVC bod?
Yɛs. Dɛn kin peint fayn fayn say dɛn afta dɛn dɔn klin, dɛn dɔn validet di say we dɛn pripia ɛn di kɔtin kɔmpitibliti.
Yu tink se dɛn kin laminate kɔ-ɛkstrud PVC fom bɔd?
Yɛs. Dekorativ film ɛn ɔda kɔmpitabl sɔfa layers kin bon to fayn kɔ-ɛkstrud bod yuz wan aprɔpriet adeziv ɛn prɔses.
Yu tink se ko-ekstrud PVC fom bod kin bi CNC rout?
Yɛs. Di matirial kin bi CNC routed, drill ɛn engraved yuz suitable tooling ɛn prɔsesin paramita.
Yu tink se kɔ-ɛkstrud PVC bod kin ol skru?
Bod dɛn we fit kin aksept skru ɛn hadwɔd. Aktual holdin pefomans dipen pan surface-layer structure, kor density, total tiknes, skru joyometri, payɔt ol ɛn lod.
PVC ko-ekstrushɔn fom bod watapruf?
PVC fom bod gεt lכw wata absכpshכn εn dεn kin yus am na say dεm we mכsichכ. If yu nid fɔ gɛt wan patikyula wata-absɔpshɔn valyu, kɔnfɔm tɛst data fɔ di ɛksaktɔl bɔd.
Yu kin yuz PVC kɔ-ɛkstrushɔn bɔd na do?
Dɛn kin ebul fɔ evaluate di rayt fɔmyulashɔn dɛn we de na do, bɔt fɔ yuz am fɔ lɔng tɛm na do fɔ spɛsifa di UV ɛksplɔshɔn, di tɛmpracha rɛnj, di kɔlɔ-ritɛnshɔn ɛkspɛkteshɔn ɛn di savis layf we dɛn nid.
Na co-extruded PVC fom bod faya retardant?
Faya bihayvya na gred- ɛn tɛst-spɛsifi k. If dɛn nid fɔ mek faya raytin, sho di rayt tɛst standad ɛn di klasification fɔ di tik we di bɔd nid.
Yu tink se kɔ-ɛkstrud PVC bod kin riples plai wud ɔ MDF?
Dɛn kin yuz am instead ɔf wud-based panɛl dɛn na sɔm sɛlɛkɛt kabinɛt, fɔnicha ɛn mɔstɔ-rɛsistant aplikeshɔn dɛn, bɔt dɛn nɔ fɔ trit am lɛk yunivasal strɔkchɔral sɔbstityuyt. Dɛn fɔ ebul fɔ no di density, stiffness, span, hadwae ɛn lod.
Yu tink se PVC ko-ekstrushɔn fom bod kin thermoformed?
di hεt fכm fכ evaluate wit di εksakכt bod biכs hεt kin afekt di sכfayz layεr dεm εn di fכm kכr difrεnt wan. Tik fɔnicha gred dɛn nɔmal fɔ pik mɔ fɔ mashin ɛn fɔ mek.
Yu tink se dɛn kin kɔt PVC kɔ-ɛkstrushɔn bɔd wit lɛsa?
Kɔnvɛnshɔnal lɛsa kɔt nɔ de rɛkɔmɛnd as di difɔlt we fɔ PVC bikɔs ɔt kin mek kɔrosiv ɛn hazada dikɔmpɔzishɔn prodak. Mɛkanikal kɔt ɛn CNC routin na jɔs mɔ aprɔpriet.
HSQY kin kɔt kɔ-ɛkstrud PVC bod dɛn to saiz?
Kastom dimɛnshɔn ɛn di kɔt-to-sayz rikwaymɛnt dɛn kin tɔk bɔt akɔdin to sheet matirial tik, dɛnsiti, tolɛreshɔn, mashin rikwaymɛnt ɛn bay bay kwantiti.
A kin aks fɔ sampul dɛn?
Dɛn kin tɔk bɔt di sampul dɛn we de fɔ evaluate di surface appearance, color, density, mashining, printing, painting, lamination ɛn hardware pefɔmans bifo kɔmɛshɔnal prodakshɔn.
Us infɔmeshɔn a fɔ gi fɔ kot?
Gi aplikeshɔn, bod tiknes, density, sheet matirial dimɛnshɔn, singl- ɔ dabl-sayd skin rikwaymɛnt, sɔfa ɛn kɔr kɔlɔ, sɔfa finish, CNC ɔ hadwae rikwaymɛnt, printin ɔ lamineshɔn prɔses, kwantiti ɛn dɛstineshɔn.
Rikwest wan PVC Ko-Ekstrushɔn Fom Bɔd Kɔt
Yu de luk fɔ wan rilibul PVC kɔ-ɛkstrushɔn fom bod manifakta ɔ kɔstɔm had-skin PVC fom sheet matirial fɔ fɔnicha, kabinɛt, intɛriɔ dɛkɔreshɔn, displei ɔ CNC fabrikeshɔn?
Send HSQY yu aplikeshɔn, tiknes, density, sheet matirial saiz, skin strɔkchɔ, surface finish, kala ɛn ɛstimat bay bay kwantiti. Fɔ kabinɛt prɔjek, inklud hadwae ɛn panɛl dimɛnshɔn. Fɔ print ɔ dɛkɔretiv aplikeshɔn, inklud sɔfays, ink, pent ɔ lamineshɔn rikwaymɛnt so dat dɛn go ebul fɔ evaluate di aprɔpriet kɔ-ɛkstrud strɔkchɔ.
