PVC Fɛns Gras Film Manufacturer fɔ Atikul Hɛj Prodakshɔn
HSQY de saplae PVC fɛns gras film , we dɛn kin kɔl bak grɛn PVC rigid film, atifishal gras fɛns fim ɔ PVC hed fim, fɔ di wan dɛn we de mek atifishal gras fɛns, dɛkɔretiv hed panɛl, bolkɔn prayvet skrin, atifishal lif, krawn ɛn land skay prodak.
Di matirial de saplae as kala rigid PVC film in rol ɔ slit wit. I kin kɔt, ɛmbos, shred, twist, wev, lamin ɔ fiks am to mɛtal mɛsh ɛn plastic sabstret fɔ mek lif dɛn we tan lɛk gras ɛn atifishal hed strɔkchɔ.
Kwik ansa: HSQY PVC fɛns fim na raw matirial fɔ prodyuz atifishal gras fɛns ɛn dɛkɔretiv fɔlia. I nɔto di sem prɔdak lɛk wan prayvesi tep we dɛn dɔn kɔt wit PVC we pipul dɛn kin wev dairekt tru wan mɛtal fɛns.
Nar HSQY PVC Fens Film Prodakt Renj
Di kategori we de naw inklud grɛn, dak grɛn ɛn kɔstɔmayz PVC rigid film fɔ atifishal fɛns, atifishal gras, turf dɛkɔreshɔn ɛn rilat dɛkɔretiv lif. Bɔku prɔdak dɛn kin ɔvalap bak wit di PVC fim we dɛn kin yuz fɔ mek atifishal Krismas tik lif ɛn krawn.
| Riprɛzɛntiv Prodakt |
Men Pozishɔn |
Pɔblished Opshɔn dɛn |
Rikɔmɛnd Baya Chɛk |
| Grin PVC Film fɔ Fɛns Gras ɛn Atikul Ti dɛn |
Jɛnɛral-pɔpɔs grɛn rigid PVC fim fɔ atifishal gras, fɛns, tik ɛn dɛkɔretiv lif. |
Grin ɛn dak grin; tik, wit, saf ɛn sɔfa we yu kin kɔstɔmayz. |
Kɔnfɛm ɔda UV pakej, fayn kɔt we ɛn gras-lif stiffness. |
| Grin PVC Rigid Sheet fɔ Artificial Fɛns |
Atifishal fɛns ɛn land skay raw matirial. |
Hɛda we dɛn dɔn pablish: 0.07–1.2 mm; ditayl rεnj: 0.15–1.2 mm; di wit frɔm 15 mm to 1300 mm. |
Kɔnfɔm di fayn aprɔv tiknɛs rɛnj ɛn tolɛreshɔn. |
| Virgin PVC Rigid Film fɔ Atikul Fɛns Gras |
Vɛjin-grɛd PVC fim fɔ atifishal fɛns, gras ɛn lif. |
Grin, dak grɛn ɛn kɔlɔ dɛn we yu kin kɔstɔmayz; mat ɔ plain surface. |
Kɔnfɛm vajin-kɔntinɛnt diklareshɔn, aditiv, kɔlɔ ɛn intended ɔda layf. |
| UV-Resistant PVC Sheet fɔ Atikul Gras Fɛns |
Outdoor-oriented PVC film wit opshɔnal UV stebilizayshɔn. |
di ditel rεnj we dεn pכblish: 0.15–1.2 mm; di wit 15–1300 mm. |
Rikwest UV tɛst kɔndishɔn instead fɔ abop pan wan jenɛral UV-rɛsistant klem nɔmɔ. |
| Layt Grin PVC Film fɔ Atikul Gras Fɛns |
Layt-grin dɛkɔretiv fim fɔ atifishal fɛns ɛn gras prodak. |
Layt grɛn ɛn kɔstɔm shed dɛn. |
Aproba fɔ kɔlɔ ɔnda de layt ɛn afta we di wɛda dɔn aksɛleret. |
Tipik PVC Fɛns Gras Film Spɛsifikeshɔn dɛn
HSQY prodak pej dɛn gɛt wan brayt hεda rεnj ɛn wan smɔl ditayl spɛsifikɛshɔn. Di fainal kot ɛn tɛknikal data shit fɔ no di aktual prodakshɔn rɛnj fɔ di fɔmyulashɔn we dɛn dɔn pik.
| Prɔpati |
we dɛn dɔn pablish HSQY Infɔmeshɔn |
Prokyumɛnt Gaydɛns |
| Tin dɛn |
Rigid polivinil klorayd film. |
Spɛsifik vajin, risaykul ɔ blɛnd fɔmyulashɔn ɛn rikwayd rigyuletɔri limit. |
| Tik we i tik |
sכm prodak hεda dεm de stet 0.07–1.2 mm; ditayl diskripshכn dεm kכmכn fכ se 0.15–1.2 mm. |
Difayn nominal tik, tolɛreshɔn ɛn mɛzhɔmɛnt we bifo yu ɔda. |
| Wayd |
Na lɛk 15–1300 mm, we yu kin kɔstɔmayz. |
Pik masta-rɔl wit ɔ prɛ-slit wit fɔ mek i mach di ikwipmɛnt fɔ kɔt ɛn mek gras. |
| Kɔlɔ dɛn |
Grin, dak grin, brawn ɛn kɔstɔm kɔlɔ dɛn. |
Apruv wan fizik kɔlɔ standad; tink bɔt miks layt ɛn dak grɛn fɔ mek yu gɛt mɔ natura l ɛfɛkt. |
| Sho |
Dɛn kin pablish mat ɛn plain; dɛn kin tɔk bɔt di tɛkstɔr dɛn we dɛn ɛmbos ɔ we dɛn kɔstɔmayt. |
Konfam glos, embos dip, tu-sayd apinans ɛn winding dairekshɔn. |
| Tik |
lεk 1.40 g/cm3 pan di kכrant ditayl prodak pej dεm. |
Yuz di apruv fɔmyulashɔn density we yu de kɔlkul di rol lɔng ɛn kɔst. |
| Fɔmat fɔ di Sapɔt |
Rol matirial, narrow slit rol ɔ kɔstɔmayz pak. |
Spɛsifik rol wet, kɔr, dayamita, splais ɛn edj kwaliti. |
| MOQ we gɛt fɔ du wit am |
Jɛnɛral 1000 kg pan kɔrɛnt HSQY prodak pej dɛn. |
Faynal MOQ dipen pan kala, wit, tik, aditiv pakej ɛn pak. |
| Kapasiti we dɛn dɔn pablish |
Na lɛk 500,000 kg pan mɔnt pan sɔm prɔdak pej dɛn we dɛn dɔn pik. |
Kɔnfɛm prodakshɔn alɔkeshɔn ɛn delivri plan fɔ ripit program dɛn. |
| Lid Taym we dɛn dɔn pablish |
lεk 7–15 dez afta dεn dכn dipכsit fכ sεlekt spεsifikεshכn dεm. |
Konfam afta kala aprɔval ɛn raw-matirial scheduling. |
| Ɛkspɔt Pak |
Rol, katon ɛn plai wud palet; di pej dεm we dεn sεlekt rεfrεns 500–2000 kg pan wan palet. |
Set palet wet akɔdin to westɛm ɛn ɔndo ikwipmɛnt. |
PVC Fence Grass Film vs Finished PVC Prayvet Fens Tep
| Kɔmpiashɔn |
PVC Fɛns Gras Film Raw Matirial |
Finish PVC Prayvet Fɛns Tep |
| Fɔm fɔ Prodak |
Rigid ɔ sɛmi-rigid grɛn PVC film rol we dɛn kin yuz fɔ mek tin dɛn. |
Finished strip ɔ riinfɔs tep rɛdi fɔ fɛns instɔleshɔn. |
| Men Baya |
Atifishal hed faktri dɛm, gras-fɛns manifakta dɛm ɛn dɛkɔretiv lif prodyusɔ dɛm. |
Ritayla, instɔla, ɔna os ɛn fɛns kɔntrakta. |
| Di we aw dɛn de du di wok |
Fɔ kɔt, ɛmbos, shred, twist, wef, lamin ɔ ataya to mɛsh. |
Wev am dairekt tru wan waya fɛns ɛn sikyuɔr wit klip. |
| Tipik Width we dɛn kin yuz |
i kin bi sכm sכm slit כ masta rol dεm we de rich lεk 1300 mm. |
Bɔku tɛm dɛn kin gi dɛn insay di wit we dɛn dɔn dɔn we mach to patikyula fɛns-panɛl spɛshal say dɛn. |
| Spɛsifikeshɔn Fokus |
Tik, stiffness, kala, UV pakej, surface, slitting ɛn rol kwaliti. |
Finished strip width, length, klips, wind lod ɛn instɔleshɔn kɔmpatibiliti. |
| HSQY Kategori Intent fɔ di wok |
Raw grin film fɔ atifishal gras fɛns ɛn dɛkɔretiv foliage prodakshɔn. |
Nɔto di praymar prodak we dis kategori ripresent. |
Aw Dɛn De Prosɛs Atifishal Gras Fɛns Fim
Kɔlɔ ɛn gred sɛlɛkshɔn: Di manifakta de pik grɛn shed, PVC gred, UV pakej, stiffness ɛn surface.
Rol slit: Dɛn kin slit masta rol dɛn to di waid we mach di ikwipmɛnt fɔ kɔt lif ɔ fɔ mek fɛns.
Ɛmbos ɔ tɛkstɔr: Mat ɔ ɛmbos sɔfays kin ridyus di glare we tan lɛk plastic ɛn mek i tan lɛk mɔ natura.
Lif ɔ gras kɔt: Dɛn kin kɔt ɔ shred di fim insay strip, bled ɔ lif shep.
Fɔm ɛn twist: Dɛn kin twist, kɔl ɔ shep di strip dɛn we dɛn kɔt fɔ ad volyum ɛn di tin dɛn we pɔsin kin si.
Assembly: Dɛn kin wev di atifishal lif, tay, lamin ɔ tay am pan mɛtal mɛsh, waya fɛns ɔ plastic bak.
Finished-product testing: Dɛn kin chɛk di fɛns ɔ hed panɛl fɔ kɔvarej, kɔlɔ, pul trɛnk, ɔdasay fɔ lɔng tɛm ɛn pak stebiliti.
Men Aplikeshɔn dɛn
Atifishal gras fɛns rol dɛn
Artificial hedge ɛn prayvet-skrin panɛl dɛn
Balkon ɛn tɛras dɛkɔretiv skrin dɛn
Gadin ɛn land skay fɛns dɛkɔreshɔn
Di kɔnstrɔkshɔn-sayt grɛn skrin dɛn
Artificial gras wall ɛn foliage panɛl dɛn
Artificial turf edging ɛn dɛkɔretiv bɛlt dɛn
Atifishal Krismas tik lif dɛn
Wreaths, garlands ɛn sizin lif dɛn
Kɔmɛshɔnal displei ɛn ivin dɛkɔreshɔn
Aw fɔ Pik di Kɔrɛkt Tik
| Tiknes Selekshɔn Fakta |
Ifɛkt pan Prɔsesin ɛn Finished Prodakt |
| Lif Stiffness |
Tik matirial jεnarali de prodyuz fכm lif dεm εn strכng shep rεtεnshכn. |
| Spid fɔ Kɔt |
Di fim we rili tik ɔ we at kin nid mɔ fɔ kɔt ɛn i kin mek di bled west mɔ. |
| Fɛns Densiti we dɛn dɔn dɔn |
Tin film kin mek mɔ lif fɔ wan kilogram bɔt i kin tan lɛk se i saf ɔ i nɔ kin strɔng. |
| Wind we de blo na do |
Di fɛns strɔkchɔ we dɔn dɔn fɔ balans fleksibiliti wit tear ɛn pul rɛsistɛns. |
| Embossing we dɛn de yuz |
Tekstכr dip εn difinishכn dipכnt pan gej, tεmprachכ εn sכfayz fכmyuleshכn. |
| Kol-Wɛda Handling |
di fכmyuleshכn εn tiknes de afekt fleksibiliti εn brittleness na lכw tεmprachכ. |
| Kost fɔ ɛni Panɛl we dɛn dɔn dɔn |
Gej de inflɔws matirial kɔnsɔmshɔn, prɔsesin spid ɛn freyt wet. |
Dɛn fɔ prosɛs wan sampul pan di aktual kɔt, ɛmbos ɔ wef ikwipmɛnt. If yu pik tik nɔmɔ frɔm wan katalog valyu, i kin mek yu gɛt lif dɛn we tu saf, tu stif, we at fɔ kɔt ɔ we nɔ kin kɔrɛkt pan di we aw dɛn de luk.
Aw fɔ Pik di Fim Wid ɛn Rol Fɔmat
Match di masta-rɔl ɔ slit wit to di prodakshɔn mashin.
Inklud ed-trim alawɛns ɛn yuzable-wid tolɛreshɔn.
Difayn rol wet ɛn maksimal rol dayamita.
Spɛsifik pepa-kɔr ɔ plastic-kɔr insay dayamita.
Kɔnfɛm di dairekshɔn we di waynd de go ɛn us sɔfays de fes na do.
Set limit fɔ splais, tɛliskɔp ɛn ed misalaynmɛnt.
Spɛsifik if rol dɛn nid fɔ gɛt wan wan katon, bag dɛn we dɛn mek ɔ fɔ pak palet.
Kɔnfɛm aw di wan dɛn we de wok go es ɛn lod di rol dɛn na di mashin.
Grin Kɔlɔ Matching fɔ Atikul Fɛns
Wan rial gras fɛns nɔ kin rili dipen pan wan grɔn valyu nɔmɔ. Yu kin jɔyn layt grɛn, dak grɛn, yɔlɔ-grin ɛn brawn aksɛn fɔ mek dip ɛn ridyus wan atifishal apinɛns.
Gi wan fizik kala chip, finish fɛns sampul ɔ aprɔv Pantone rɛfrɛns.
Evaluate kala ɔnda de layt, indo layt ɛn rital displei layt.
Apruv ɔl tu di sɔfayz kɔlɔ ɛn kɔlɔ tru di fim tik.
Difayn akseptabl lɔt-to-lɔt kɔlɔ chenj.
Test kala afta UV exposure, hot en outdoor weathering.
Kɔnfɛm if di tin dɛn we dɛn dɔn risaykul kin chenj di kɔlɔ we dɛn kin gɛt.
Kip ritɛn sɛmpul frɔm ɛvri aprɔv prodakshɔn batch.
Mat, Plɛn, Glɔsi ɛn Ɛmbos Surface Opshɔn dɛn
| Surface |
Visual Effect |
Prosesin Kɔnsidɛreshɔn |
| Mat |
I de ridyus di glare ɛn i kin mek di lif dɛn we de na di wɔl tan lɛk mɔ natura. |
Chek skrat apinans, rol blok ɛn ɛmbos kɔnsistɛns. |
| Plɛn / Smɔl |
Simpul surface fɔ kɔt, twist ɛn jenɛral dɛkɔreshɔn. |
I kin sho mɔ layt we de riflekt dipen pan di glos lɛvɛl. |
| Glossy, we de shayn |
Prodyuz strɔng kɔlɔ sɛtyureshɔn ɛn wan brayt dɛkɔretiv ifɛkt. |
I kin apia mɔ lɛk plastic na do ɛn i kin sho mak dɛn we de ɔp. |
| Dɛn dɔn ɛmbos am |
Ad tɛkstɔr ɛn i kin simul vein ɔ gras patɛn. |
Rikways kɔntrol ɛmbos dip, rol tɛmpracha ɛn patɛn rɛjista. |
| Kastɔm Tɛkstɔr |
Sɔpɔt difrɛns atifishal-lif ɛn fɛns dizayn dɛn. |
Nyu tɛkstɔr rɔla, MOQ ɛn sampling kin nid. |
UV Resistance ɛn Ɔda Wɛda
UV resistans nɔto ɔtomɛtik prɔpati fɔ ɛvri grɛn PVC fim. I dipen pan di stebyulayza pakej, pigmɛnt, film tik, klaymat, ɛksplɔshɔn angle, tɛmpracha ɛn dɔn fɛns kɔnstrɔkshɔn.
Kɔmpitishɔn pej dɛn kin kɔmɔn fɔ makɛt tri to fayv ia ɔda layf, bɔt dɛn fɔ jɔs tɔk bɔt dis kayn tɛm we dɛn sɔpɔt am wit wan fɔmyulashɔn we dɛn dɔn difayn, aksɛleret-weda rizɔlt ɛn fil kɔndishɔn. Di wan dɛn we de bay HSQY fɔ aks fɔ tɛst kɔndishɔn pas fɔ gɛt prɔmis we nɔ gɛt sɔpɔt fɔ di yunivasal savis-layf.
Spɛsifik di klaymat usay yu want fɔ go ɛn di we aw yu go ɛkspɛkt fɔ go na do.
Difayn if di aplikeshɔn na ful san, pat pan shed ɔ indo dɛkɔreshɔn.
Rikwest aksɛleret UV ɔ xenon-ark wɛda data usay dɛn nid am.
Chek di chenj we di kɔlɔ de chenj, di glos we de lɔs, we i de krak, di tɛnsiɛl ritɛnshɔn ɛn di britlɛs.
Evaluate ɔl tu di layt-grin ɛn dak-grin kɔlɔ dɛn.
Test di fɛns we dɔn dɔn bikɔs di mɛsh tɛnsiɔn ɛn di briz de afɛkt di pefɔmɛns.
Establish warranty onli afta dem gri di fomulashon en test method.
Wata, Humiditi ɛn Kwɛmyuɛl Rɛsistɛns
Rigid PVC nɔ gɛt bɔku wata ɛn dɛn kin yuz am fɔ mek tin dɛn we dɛn kin yuz fɔ dekɔret na do. Di film fɔmyulashɔn fɔ stil tɛst agens klin ɛjɛn, fɛtilayza, pul kemikal, sɔl sprɛy ɔ industrial kɔntaminɛnt dɛn we dɛn de ɛkspɛkt na di las envayrɔmɛnt.
Wata we di fim de mek nɔ de mek di fɛns we dɔn dɔn nɔ gɛt mentenɛns fɔ insɛf. Waya kɔrɛshɔn, atachmɛnt fayl, dɔti akumulɛshɔn ɛn briz damej dipen pan di fɛns sistɛm we dɛn dɔn dɔn.
Virgin, Risaykul ɛn Blɛnd PVC Gred dɛn
| Gret Kɔnsɛpt |
Posisibul |
Bɛnifit Baya Kɔnsidɛreshɔn |
| Virgin PVC Gred we yu de yuz |
Mɔ kɔntrol fɔmyulashɔn, kɔlɔ kɔnsistɛns ɛn traysabiliti. |
Usually higher raw-material kɔst; verify aditiv ɛn kɔmplians rikwaymɛnt dɛn. |
| Virgin/Risaykul Blɛnd |
I kin ridyus di vayjin-matirial kɔnsɔmshɔn ɛn kɔst. |
Kɔlɔ, smel, mɛkanikal prɔpati ɛn ɔda ol ol nid fɔ validet. |
| Di Risaykul Kɔntinɛnt we Ay pas ɔl |
Sɔpɔt sɔm kɔst ɔ sɛkyulari target dɛn we dɛn dɔn pik. |
I kin mek difrɛns go ɔp ɛn dɛn nɔ fɔ yuz am fɔ diman klem dɛn we dɛn nɔ tɛst am. |
| Kastom Envayrɔmɛnt Gred |
Kin target restricted-substance ɔ market-spɛsifi k rikwaymɛnt dɛn. |
Difayn di rigyuleshɔn ɛn tɛst list pas fɔ yuz di vayg wɔd 'eco-friendly.'. |
Nɔ tɔk bɔt PVC fim se i nɔ de ambɔg di envayrɔmɛnt jɔs bikɔs i kin bi risaykul ɔ i kin gɛt tin dɛn we dɛn dɔn risaykul. Envayrɔmɛnt klem fɔ sho di risaykul pasɛnt, sɔs, aplikebul tɛst we ɛn lokal rikavari rod.
Opshɔnal Fɔmulashɔn dɛn we nɔ de mek flaym
PVC na tin we nɔ izi fɔ bɔn we yu kɔmpia am wit bɔku haydrokabɔn plastic dɛn, ɛn di wan dɛn we de gi am kin gi ɔda fɔmyulashɔn dɛn we nɔ de mek faya. Wan patikyula B1, V-0, V-2, NFPA ɔ ɔda raytin fɔ jɔs yuz we dɛn dɔn tɛst di ɛksaktɔl prodak to di standad ɛn tik we dɛn gi am.
Ɔda atifishal fɛns fim ɛn indo dɛkɔretiv foliage kin nid difrɛn faya-pɔfɔmɛnshɔn spɛsifikɛshɔn. Di wan dɛn we de bay fɔ gi di say we dɛn want ɛn di standad we dɛn nid bifo dɛn pik di fɔmyulashɔn.
PVC Fens Gras Film vs PE ɛn PET Film
| Matirial |
Men Strɔng Pɔtɛnɛshɛl |
Limiteshɔn |
Bɛst Evalueshɔn Point |
| PVC rigid film we yu de yuz |
Gud kalarabiliti, ɛmbos, stiffnɛs kɔntrol, wɛldin ɛn dɛkɔretiv prɔsesin. |
I nid fɔ tek tɛm manej di aditiv ɛn risaykul. |
Kɔt, ɛmbos, ol na do ɛn finish-lif apinɛns. |
| P. E. Film |
Low density, fleksibiliti ɛn gud mɔstɔ rɛsistɛns. |
Difrɛn stiffness, bonding ɛn embossing bihayvya. |
Lif rεkכvri, atachmεnt mεtכd εn UV fכmyuleshכn. |
| PET Film we dɛn kɔl PET |
Hכy stiffnεs εn dimεnshכnal stεbiliti in sεlekt grεd dεm. |
I kin bi less ductile fכ sכm twist εn artificial-lif prכsεs dεm. |
Kɔt pefɔmɛns, lif yield ɛn kris bihayvya. |
Kwaliti Kontrol fɔ PVC Fɛns Film Rol dɛn
| Kwaliti Chɛk |
Wetin Mek I Impɔtant |
| Matirial ɛn Fɔmulashɔn |
Kɔnfɔm PVC gred, plastizayza lɛvɛl, pigmɛnt, stebyulayza ɛn risaykul kɔntinyu. |
| Tiknɛs Profayl |
Kontrol stiffness, lif yield, kot lod ɛn finish-product kɔnsistɛns. |
| Width ɛn Slitting |
I de mek prɔblɛm nɔ de fɔ trak ɛn nɔ ivin gɛt atifishal-gras strip dɛn. |
| Difrɛns bitwin di kɔlɔ dɛn |
Mentɛn wan kɔnsistɛns hed apinans akɔdin to panɛl ɛn prodakshɔn lɔt dɛn. |
| Surface ɛn Ɛmbos |
Kontrol natura apiyans, glos ɛn patɛn kɔnsistɛns. |
| Tensile ɛn Tiar Pɔfɔmɛnshɔn |
I de ridyus di brok brok we yu de kɔt, twist, wev ɛn yuz am na do. |
| Shrinkage ɛn Dimɛnshɔnal Stebiliti |
I de mek di stoj nɔ apin we dɛn de kip ɛn prodyuz. |
| Rol Winding we dɛn kin yuz |
Kontrol teleskop, wrinkles, blok en mashin fidin. |
| We pɔsin de ol na do |
Evaluate kala chenj, krak krak ɛn ritɛn mɛkanikal prɔpati dɛn. |
| Batch Traceability we yu kin tray fɔ no |
Link di rol we dɛn dɔn deliv to raw matirial, prodakshɔn data ɛn inspekshɔn rɛkɔd. |
Kɔmɔn Prodakshɔn Prɔblɛm ɛn Kɔrɛkt Akshɔn dɛn
| Prɔblɛm |
Posisibul Kɔz |
Dɛn Rikɔmɛnd Chɛk |
| Film Break We Dɛn De Kɔt |
Film tu britl, low temperechur, inkonsistent tik ɔ pasmak risaykul kɔntinyu. |
Chek fɔmyulashɔn, gej profayl, stɔrɔj tɛmpracha ɛn kɔta kɔndishɔn. |
| Lif dɛn Tu Sɔft |
Gej tu tin ɔ fɔmyulashɔn tu fleksibul. |
Inkris stiffness ɔ tiknes afta layn trayal. |
| Lif dɛn Tu Stif |
Gej tu tik, had fɔmyulashɔn ɔ kol prɔsesin. |
Adjɔst tik, fɔmyulashɔn ɛn prɔsesin tɛmpracha. |
| Grin Kɔlɔ Difrɛn |
Pigmɛnt dispershɔn, risaykul-matirial vɛryushɔn ɔ batch-kɔntrol ishu dɛn. |
Yuz di kɔlɔ standad dɛn we dɛn dɔn gri fɔ ɛn batch tɛst. |
| Surface Luk Tu Glossy |
Inkɔrɛkt sɔfayz fɔmyulashɔn ɔ ɛmbos sɛtin. |
Spɛsifik mat lɛvɛl ɛn apruv wan prodakshɔn sampul. |
| Film Fade na do na do |
Insufishɛnt UV pakej, nɔ stebul pigmɛnt ɔ siriɔs klaymat. |
Rivyu stebyulayza ɛn wɛda tɛst rizɔlt. |
| Rol Teleskɔp dɛn |
Uneven winding tension, po kor alaynɛshɔn ɔ handel damej. |
Kontrol winding ɛn palet transpɔt. |
| Film Stik dɛn na di Rol |
Ɔt pasmak, prɛshɔn, sɔfa tak ɔ stɔrɔj kɔndishɔn. |
Rivyu fɔmyulashɔn, wayndin prɛshɔn ɛn westɛm tɛmpracha. |
Sampul Evalueshɔn fɔ Atifishal Gras Fɛns Manufacturers
Verifay dimɛnshɔn: Mɛzhɔ tik, waid, rol wet ɛn kɔr saiz.
Apruv kɔlɔ: Kɔmpia di sampul ɔnda de layt ɛn wit di fɛns dizayn we dɛn dɔn dɔn.
Rɔn di rial mashin: Test fɔ slit, kɔt, ɛmbos, twist ɔ wiv wit kɔmɛshɔnal spid.
Mekɔp di matirial yield: Rikɔd di lif ɔ fɛns we dɔn dɔn fɔ wan kilogram.
Test pul ɛn tear pefɔmɛns: Evaluate brɛk we dɛn de prodyuz ɛn asɛmbli.
Bil panɛl we dɔn dɔn: Chɛk di kɔvarej, di density, di we aw i luk ɛn di trɛnk we di atɛshɔn gɛt.
Run outdoor testing: Inklud UV, ren, ɔt, kol ɛn briz kɔndishɔn we fit di makit.
Test pak: Kɔnfɔm se di rol ɛn finish fɛns panɛl dɛn de kam bak afta transpɔt kɔmpreshɔn.
Apruv wan golden sampul: Link di sampul to di kɔlɔ, tik, waid, sɔfa ɛn fɔmyulashɔn spɛsifikɛshɔn.
Pak ɛn Ɛkspɔt Lɔjistik
HSQY prodak pej dɛn de rɛfrɛns smɔl sampul rol dɛn, plastic wrapin, katon, plai wud palet ɛn kɔntena-skel shipmɛnt. Dɛn fɔ pik di pak akɔdin to di rol wet, di kɔstɔma ikwipmɛnt ɛn di kɔndishɔn fɔ ɔndo.
Rol wet ɛn rol lɔng
Kor insay dayamita ɛn kor lɔng
Maksimal rol dayamita
Plastik film, PE fom, katon ɔ wef-bag protɛkshɔn
Plywood palet dimɛnshɔn ɛn wet limit
Edj protɛkshɔn ɛn anti-tɛliskɔping mɛsej dɛn
Mɔstɔ ɛn dɔst protɛkshɔn
Batch lɛbl, barɔd ɛn shiping mak dɛn
20-fut ɔ 40-fut kɔntena lod plan
Storage temperechur ɛn maksimal stak ayt
Wetin Mek Yu Pik HSQY fɔ PVC Fɛns Gras Film?
Grin, dak grɛn, brawn ɛn kɔstɔmayz PVC kɔlɔ dɛn
Pɔblish tiknɛs kɔvarej frɔm lɛk 0.07 mm to 1.2 mm, sɔbjɛkt to gred kɔnfɔmeshɔn
Kastom wit frɔm lɛk 15 mm to 1300 mm
Matt, plain ɛn kɔstɔmayz sɔfa opshɔn dɛn
Virgin, blended ɛn risaykul-grɛd projɛkt opshɔn dɛn
Opshɔnal UV-rɛsistant ɛn flaym-rɛtardant fɔmyulashɔn dɛn
Slit rol, masta rol ɛn ɛkspɔt pak
Sampul sɔpɔt fɔ kɔt, ɛmbos ɛn atifishal-fɛns prodakshɔn trayal
Publish MOQ arawnd 1000 kg fɔ standad projɛkt dɛn
Bulk ɛkspɔt saplai fɔ atifishal hed, fɛns ɛn foliage manifakta dɛn
Rilat matirial kategori dɛn inklud PVC Krismas tri film, PVC lawn film, PVC kala sheet ɛn PVC sheet we dɛn mek.
Rikwest Sampl ɛn wan Bɔlk Kɔteshɔn
Fɔ gɛt kɔrɛkt rɛkɛmɔndeshɔn ɛn kot, gi:
Finish atifishal fɛns, hed ɔ lif aplikeshɔn
Tik ɛn tolɛreshɔn we dɛn nid
Masta-rɔl ɔ slit-rɔl wit
Rol wet, dayamita ɛn kɔr saiz
Grin shed ɔ fizik kɔlɔ sampul
Mat, plain, glos ɔ ɛmbos sɔfays
I nid fɔ mek i stif ɔ fɔ mek i saf
Virgin, risaykul ɔ blɛnd fɔmyulashɔn
UV-rɛsistɛns ɛn ɔda-layf target
Flame-retardant ɔ restricted-substance rikwaymɛnt dɛn
Ikwipmɛnt fɔ kɔt, ɛmbos, twist ɔ wev
Mɔnt ɔda kwantiti ɛn ɛni ia fɔkɔs
Pak we, ples fɔ go pɔt ɛn Incoterms
Kontakt HSQY
FAQ Bɔt PVC Fɛns Gras Film
Wetin na PVC fɛns gras film?
Na wan kɔlɔ rigid PVC fim we dɛn kin yuz as raw matirial fɔ atifishal gras fɛns, hed panɛl, dɛkɔretiv lif ɛn ɔda tin dɛn we gɛt fɔ du wit land skay.
Dis prodak na finished prayvet fens tep?
Nɔ. Dis kategori men wan gɛt raw PVC fim fɔ atifishal gras ɛn hed prodakshɔn, nɔto wan kɔshɔma-rɛdi rɛinfɔs fɛns tep wit instɔleshɔn klip dɛn.
Wetin dɛn kin yuz PVC fɛns gras fim fɔ?
Dɛn kin yuz am fɔ mek atifishal gras fɛns, hed panɛl, balkɔn skrin, gras wɔl, atifishal lif, krawn ɛn dɛkɔretiv grɛn.
Us tiknes HSQY de gi?
di HSQY hεda dεm we de naw de sho lεk 0.07–1.2 mm, we di ditayl spεsifikεshכn dεm kכmכn sho 0.15–1.2 mm. Kɔnfɛm di las gred ɛn di tolɛreshɔn.
Us wayd dɛn de?
HSQY de pablish customizable widths frɔm lɛk 15 mm to 1300 mm.
Us kɔlɔ dɛn de?
Grin, dak grin, brawn ɛn kɔstɔm kɔlɔ dɛn de. Miks grɛn shed dɛn kin divɛlɔp fɔ wan natura gras ifɛkt.
Yu tink se dɛn kin ebul fɔ ɛmbos di fim?
Mat, plein ɛn kɔstɔmayz tɛkstɔr ɔ ɛmbos sɔfays dɛn kin tɔk bɔt akɔdin to di finished foliage dizayn.
PVC fɛns gras film UV resistant?
UV-resistant fכmyuleshכn dεm de, bכt di pεrformεns dipכnt pan di aditiv pakej, pigmεnt, tiknes, klaymat εn tεst kכndishכn dεm.
Aw lɔng di fim kin las na do?
Dɛn nɔ go ebul fɔ tɔk bɔt layf we de na do ɔlsay na di wɔl. I dipen pan di fɔmyulashɔn, san layt, klaymat, fɛns kɔnstrɔkshɔn ɛn di wɛda tɛst we dɛn gri fɔ.
Yu tink se di fim nɔ de mek wata pas?
Rigid PVC gɛt smɔl wata absɔpshɔn ɛn i fayn fɔ bɔku tin dɛn we dɛn kin du na do, bɔt dɛn fɔ ebul fɔ evaluate di fɛns sistɛm we dɛn dɔn dɔn bak.
Yu tink se dɛn kin yuz di fim na say dɛn we kol?
Dɛn kin fɔmulayt am fɔ yuz na do, bɔt dɛn fɔ tɛst di lɔw-tɛmpracha fleksibiliti ɛn impak rɛsistɛns fɔ di klaymat usay dɛn de go.
Yu tink se dɛn kin slit di fim insay smɔl smɔl rol dɛn?
Yɛs. Dɛn kin gi kɔstɔm slit wit fɔ mek i mach di ikwipmɛnt fɔ kɔt lif, twist, wev ɛn fɛns-prɔdakshɔn.
Us rol infɔmeshɔn dɛn nid?
Gi di wit, rol wet, ɔta dayamita, kɔr saiz, wayndin dairekshɔn, splais limit ɛn pak rikwaymɛnt.
Yu tink se dɛn kin mek di fim wit vajin PVC?
Yɛs. Virgin-grade prodakt dɛn de, we de ɔnda di fɔmyulashɔn we dɛn dɔn pik ɛn di tin dɛn we dɛn nid fɔ du fɔ di prɔjek.
Yu tink se dɛn kin yuz PVC we dɛn dɔn risaykul?
Dɛn kin tink bɔt gred dɛn we dɛn dɔn risaykul ɔ we dɛn blɛnd, bɔt dɛn fɔ validet di kɔlɔ, ɔda tin dɛn we dɛn de smɛl, di we aw dɛn de wok wit di mɛkanikal wok ɛn di ol we dɛn de ol na do.
Yu tink se PVC fɛns fim kin risaykul?
PVC kin bi risaykul usay fayn kɔlɛkshɔn ɛn prɔsesin sistɛm dɛn de. Di aktual rikavari rod dipen pan di kɔmplit prodak ɛn lokal infrastukchɔ.
Yu tink se di fim nɔ de mek faya?
Opshɔnal fɔmyulashɔn dɛn we nɔ de mek faya kin de. Wan patikyula raytin fɔ jɔs klem afta dɛn dɔn tɛst di rayt gred to di standad we dɛn gi di nem.
Wetin na di difrɛns bitwin mat ɛn glos fim?
Mat fim de ridyus di glare ɛn bɔku tɛm i kin luk mɔ natura, we glos fim kin mek brayt kɔlɔ ɛn strɔng riflekshɔn.
Aw a go pik di rayt tik?
Bays di disishun pan lif stiffness, cutting speed, finished-fence density, wind exposure, embossing ɛn target kɔst fɔ ɛni panɛl.
HSQY kin mach wan kɔstɔm grɛn kɔlɔ?
Yɛs. Gi wan fizik sampul ɔ kɔlɔ rɛfrɛns ɛn difayn di akseptabl lɔt-to-lɔt kɔlɔ tolɛreshɔn.
Wetin na di MOQ?
HSQY prodak pej dɛn jɔs de pablish wan MOQ we na 1000 kg. Faynal MOQ dipen pan tik, wit, kɔlɔ, fɔmyulashɔn ɛn pak.
Wetin na di tipik lida tɛm?
Di HSQY pej dɛn we dɛn dɔn pik de rɛfrɛns lɛk 7–15 dez afta dɛn dɔn put di mɔni, we de ɔnda di kɔlɔ aprɔval, kwantiti ɛn prodakshɔn scheduling.
A kin aks fɔ sampul dɛn?
Yɛs. Wan yusful sampul fɔ tɛst pan di aktual kɔt, ɛmbos ɔ fɛns-prɔdakshɔn ikwipmɛnt.
Us dɔkyumɛnt dɛn dɛn kin gi?
Dɛn kin tɔk bɔt di prɔdak spɛsifikɛshɔn dɛn, kwaliti rɛkɔd dɛn ɛn di tɛst dɔkyumɛnt dɛn we dɛn kin yuz fɔ di gred ɛn ɔda we dɛn dɔn pik.
Us infɔmeshɔn dɛn nid fɔ kot?
Gi aplikeshɔn, tik, wit, kɔlɔ, sɔfa, stiffnɛs, UV target, fɔmyulashɔn, rol pak, kwantiti ɛn ples fɔ go.
