Tray PP we gɛt ay barɛri

Wetin Na Ay Barɛri PP Trey?

wan ay barεri PP tre na tεmכfכm polipropilεn it tre we dεn mek wit mכltilayεr strכkchכ we dεn mek fכ ridyus di transmishכn fכ כksijεn εn כda gas dεm tru di pakej.

Dipen pan di aplikeshɔn we dɛn nid, di strɔkchɔ kin jɔyn polypropylene wit wan EVOH barɛri layt, polyethylene ɔ ɔda siling layt, ɛn adhesive tay layers. Kɔmɔn strɔkchɔ dɛn inklud PP/EVOH/PE , PP/EVOH/PP ɛn ɔda prɔjek-spɛsifi k PP-bɛs kɔnstrɔkshɔn dɛn.

HSQY de saplae klia ay barɛri PP trey dɛn fɔ fresh mit, bɔd, fish, sifud, pripia it, kol it ɛn modifyed atmosfɛs pak. Di prɔdak dɛn we de naw gɛt bɔku dip, wan kɔmpawtmɛnt ɛn tu kɔmpawtmɛnt dizayn dɛn, wit kɔstɔm saiz, kɔlɔ, barɛri strɔkchɔ ɛn mold dɛn we de fɔ kwalifay prɔjek dɛn.

Wan ay barɛri tre na wan kɔmpɔnɛnt fɔ wan kɔmplit pak sistɛm. Faynal pakej pefɔmɛns dipen bak pan di lidding film, sil kwaliti, it prodak, gas miksɔp, pak ikwipmɛnt ɛn kol-chen kɔndishɔn.

High Barrier PP Tray Spɛsifikeshɔn dɛn

Di tebul we de kam biɛn ya de sɔmariz di prinsipal opshɔn dɛn we de akɔdin to di HSQY ay barɛri PP tre kategori. Eksakt spɛsifikɛshɔn dɛn fɔ kɔnfɔm fɔ di tre mɔdel we dɛn dɔn pik.

Di listed temperechur rεnj na rεfrεns fכ sεlekt PP trey dɛn εn i nכto yunivasal garanti. di mεtirial strכkchכ, tre tik, it kכmכshכn, filin tεmprachכ, hεt tεm, friz kכndishכn εn lid film כl kin afekt fayn pכrfomans.

Aw PP/EVOH Ay Barɛri Trey De Wok?

wan ay barεri PP tre de yuz sεvεra fכnshכnal polimכr layεr dεm. di layεr dεm de bon tכgeda di tεm we sheet matirial de prodyuz εn de rεmain intagrεd we di sheet matirial tεmכfכm insay wan tre .

di ekzak nכmba, sikεns εn tiknes fכ di layεr dεm fכ sεlekt akɔdin to di כksijεn transmishכn rεt we dεn nid, mכsichכ εkspכzכn, fכm dip, tre stiffness, siling sistεm εn tכgεt shelf layf.

Baya dɛn we nid fɔ gɛt difayn multilayer kɔnstrɔkshɔn kin rivyu HSQY dɛn bak    PP/EVOH/PE tre sɔlvishɔn dɛn.

High Barrier PP Trey vs. Standart PP trey

High barɛri PP trey vs. MAP tre

Wan ay barɛri PP tre de diskrayb di matirial ɛn barɛri pefɔmɛns fɔ di tre . Wan MAP tre de diskraib aw dɛn de yuz di tre insay wan modifyed atmosfɛs pak prɔses.

Wan ay barɛri PP tre kin yuz as MAP tre we i gɛt di gas barɛri we dɛn nid, silin flɛnch ɛn mashin kɔmpitibliti. Bɔt fɔ jɔs ad wan EVOH layt nɔ de gi garanti se ɛvri tre fit fɔ ɛvri MAP aplikeshɔn.

MAP pefɔmɛns dipen pan:

• Tray ɔksijɛn transmishɔn rit

• Liding-film gas barɛri

• Sil strɛngth ɛn pakej lik rit

• Selekt gas kompozishun

• Volyum fɔ gas-to-prɔdakt

• Di kayn it ɛn di fɔs maykrobial kɔndishɔn

• Stɔrej ɛn distribyushɔn tɛmpracha

• Target shelf layf

Di kɔstɔma dɛn we de divɛlɔp wan ful modifyed atmosfɛs pak projɛkt kin rivyu HSQY dɛn    MAP tre rεnj.

Aplikeshɔn dɛn fɔ Ay Barɛri PP Fud tre s

Fresh Mit we dɛn kin pak

Yu kin yuz ay barɛri PP trey dɛn fɔ bif, bɔd, ship, mins mit, slais mit, mitbɔl ɛn marinated prodakt we dɛn pak ɔnda modifyed atmosfɛs.

di tre dip, edspεs, gas miksכp, abzכbεnt pad εn film pankshכn rεsistεns fכ mach wit di mit we dεn kכt εn pak wet.

Fɔ Pak Pɔltri

di kכkכ in bכst, di leg, di wing, dכmstik, di tכki pat dεm εn di pכltri dεm we dεn pripia kin pak insay barεri trey dɛn we dεn mek fכ kol rital distribushכn.

di bon-in poultry kin nid dip trey dɛn εn liding films wit big pankshכn rεsistεns.

Fish ɛn Sifud Pakɛj

Di aplikeshɔn dɛn na fish filɛt, shrimps, shelfish, sifud pat dɛn ɛn sifud prodak dɛn we dɛn dɔn pripia.

Sifud pak nid fɔ tek tɛm validet di gas kɔmpɔzishɔn, tɛmpracha, likwid rilis, maykrobayolojikal risk ɛn paket intɛgriti.

Mit ɛn Sosish we dɛn dɔn prosɛs

hכy barεri trey dɛn kin evaluate fכ sosish, bekin, slais prכsεs mit, mitbol, ​​marinated prodakt εn כda kol protin dεm we nid kכntroled gas transmishכn.

Chilled Ready Meals we dɛn dɔn mek fɔ it

Singl-kɔmpatmɛnt ɛn divayd PP barɛri trey dɛn kin ol rays, pasta, mit, vɛjitebul, sos ɛn mɔltikɔmpɔnɛnt it.

di tre strכkchכ we dεn nid de dipכnt pan if dεn pak di it kol, rihit insay di tre , pasteurized, frozen כ distributed כnli כnda frij.

Chiz ɛn Dairy-Based Food

di chiz dεm we dεn sεlekt, dεyri-bεys it, dip εn kol dairy prodakt kin yuz barεri pak we dεn fכ kכntrol כksidεshכn, aroma tכnfכs כ gas rεtεnshכn.

Fɔd we dɛn dɔn pripia ɛn we dɛn dɔn rɛdi fɔ kuk

di ay barεri PP trey dɛn dεn fayn bak fכ sεlekt rεdi fכ kuk ingridiεnt dεm, it kכmכpכnt dεm, marinated fud dεm εn fudsavis prodakt dεm we nid fכ hεt sial εn frij distribyushכn.

High Barrier Pakɛj Silin Film dɛn fɔ PP Trey dɛn

Di liding film fɔ mach wit di tre strɔkchɔ. Wan ay barɛri tre we dɛn sial wit wan fim we nɔ fayn ɔ we gɛt lɔw barɛri nɔ go gi wan kɔmplit ay-baria pakej.

Impɔtant prɔpati dɛn we di lidding-film gɛt na:

• Kompatibl silant layt fɔ PP, PE ɔ di spɛsifikɛd tre sɔfays

• Di rayt ɔksijɛn transmishɔn rit

• Kabon dayɔgzayd barɛri usay dɛn nid am

• Wata-vapour barɛri fɔ di wata

• Sil trɛnk

• I izi-pil ɔ lɔk-sil opin pefɔmɛns

• Hot-tak pefɔmɛns

• Abiliti fɔ sial tru limited mɔstɔ ɔ gris kɔntaminɛshɔn

• Anti-fog pefɔmɛns

• Pankchɔ rɛsistɛns

• Di tin dɛn we dɛn nid fɔ print ɛn fɔ mek di brand

• Kompatibiliti wit di tre silin mashin

HSQY kin tɔk bɔt kɔmpatib    EVOH/PP ay barɛri liding film    fɔ sɛlɛkɛt PP trey dɛn .

Dɛn fɔ tɛst di sampul dɛn na di kɔstɔma in aktual silin mashin bifo dɛn gri fɔ mek bɔku tre -ɛn-film ɔda.

Mashin fɔ Sial Tray Kɔmpatibiliti

Ay barɛri PP trey dɛn kin yuz wit manual, sɛmi-ɔtomɛtik ɛn ful ɔtomɛtik tre silin ikwipmɛnt we di tre dimɛnshɔn ɛn flɛnch jɔyometri mach di silin tul.

Di wan dɛn we de bay fɔ kɔnfɔm:

• Ekstanshal tre lɔng ɛn wit

• Dip we di trey de

• Flange wit di wid

• Kɔna rayus

• Dimenshɔn dɛn fɔ di tul kaviti

• Nɔmba fɔ di kaviti dɛn fɔ wan saykl

• Maksimal prodakt ayt

• Di wayd we di fim gɛt

• Sil-plet profayl

• Sial tɛmpracha, prɛshɔn ɛn tɛm fɔ de

• Vaykum ɛn gas-flush funkshɔn

• Otomatik denest rikwaymɛnt dɛn

Di kɔstɔma dɛn we de plan fɔ mek wan kɔmplit pak layn kin rivyu HSQY dɛn bak    it tre sial mashin dɛn.

Yu tink se Ay Barɛri PP Trey dɛn Maykrowev Sef?

Dɛn kin yuz polipropilɛn fɔ pak it we dɛn kin yuz maykrowev, bɔt wan ay barɛri PP tre nɔ fɔ ɔtomɛtik diskrayb as maykrowev-sef jɔs bikɔs i gɛt PP.

Maykrowev we fit fɔ yuz dipen pan:

• Eksakt PP resin ɛn multilayer strɔkchɔ

• Tray wall tik ɛn jɔyometri

• Fɔd kɔmpɔzishɔn, mɔ di ɔyl, shuga ɛn fat we de insay

• Fɔd wet

• Maykrowev pawa ɛn tɛm fɔ ɔt

• If dɛn pul di liding film ɔ dɛn dɔn pul di briz

• Maksimal lokal it temperechur

Di tre we dɛn pik fɔ tɛst wit di aktual it ɛn rihit instrɔkshɔn bifo dɛn ad maykrowev klem to rital pak.

Yu tink se di ay barɛri PP trey dɛn friza sef?

Dɛn kin ebul fɔ evaluate PP tre fɔmyulashɔn dɛn we dɛn dɔn pik fɔ frɔzɛn it pak. Bɔt di friza pefɔmɛns de dipen pan mɔ pas di nominal stɔrɔj ​​tɛmpracha.

Test fɔ tink bɔt:

• Di tɛmpracha we de friz

• Rate fɔ friz

• Di wet we di prɔdak gɛt

• Impekt di tɛm we dɛn de handle frɔz

• Lod we de stak

• Transpɔt vaybreshɔn

• Friz-thaw saykl dɛn

• Lidding-film fleksibiliti na low temperechur

Wan pak tre nɔmɔ nɔ de mek friza nɔ bɔn. Mɔstɔ lɔs ɛn friza bɔn dipen bak pan film barɛri, sil intɛgriti, edspɛs ɛn stɔrɔj ​​kɔndishɔn.

Yu tink se dɛn kin pastɔrayz ɔ ritɔt di ay barɛri PP trey dɛn?

Nɔto ɛvri ay barɛri PP tre fayn fɔ pastɔrayzeshɔn, ɔt filin ɔ rɛtɔt prɔsesin.

dis aplikεshכn dεm nid tre strכkchכ we dεn spεshal divεlכp εn tεst fכ di tεm we dεn bin want, tεmprachכ, prεshכn εn fכmyuleshכn fכ it.

Ritort prɔsesin nɔmal wan involv tɛmpracha ɔp di 100°C rɛfrɛns we dɛn rayt fɔ sɔm sɛlɛkɛt HSQY kategori prodak dɛm. So, standad trey dɛn insay dis kategori nɔ fɔ promot as ritɔtabl pas dɛn gi wan sɛpret validet rɛtɔt-grɛd spɛsifikɛshɔn.

Yu tink se di High Barrier PP Trays De Ekstens Fɔd Shelf Layf?

hכy barεri trey dɛn kin sכpכt lכng distribushכn pεriכd bay we i de ridyus כksijεn ingreshכn εn rεtεn di intanεt atmosfεr we dεn sεlekt. Bɔt di tre nɔ de indipɛndɛnt wan fɔ disayd di it shelf layf.

Shelf layf dipen pan:

• Di kwaliti fɔ it fɔs

• Microbial lod we de na di bɔdi

• Fɔ prosɛs di hajɛns

• Fɔ ful-ɔp di tɛmpracha

• Tray barɛri pefɔmɛns

• Lidding-film barɛri pefɔmɛns

• Sil intɛgriti

• MAP gas kompozishun

• Gas-to-prɔdakt rεshɔn

• Kapasiti fɔ absɔbɛnt-pad

• Di tɛmpracha we dɛn de kip di tin dɛn

• Kol-chen stebiliti

• Ritayl displei kɔndishɔn dɛn

Kɔmɛshɔnal shelf-layf klem fɔ sɔpɔt bay maykrobayolojikal, sɛns, gas-ritɛnshɔn, sil-intɛgriti ɛn stɔrɔj ​​tɛst we yu de yuz di aktual it ɛn paket.

Aw fɔ Pik wan Ay Barɛri PP Trey

Difayn di Fɔd Prodak

Fresh mit, sifud, bɔd, chiz ɛn rɛdi it dɛn gɛt difrɛn ɔksijɛn sɛnsitiviti, mɔstɔ rilis, tɛmpracha ɛn maykrobayolojikal rikwaymɛnt.

Kɔnfɛm di Pɔshɔn Weyt

di tre fכ sכpכt di it wet we i nכ bεnd pasmak εn gi inof intanεt vכlyum fכ di it, absכbεnt pad εn di gas hεdsεs we i nid.

Pik di Kɔrɛkt Dip

Wan shalo tre kin mek di it kɔntakt di film ɔ kɔntamin di silin flɛnch. Wan dip tre we nɔ nid de mek di pakej volyum ɛn transpɔt kɔst go ɔp.

Difayn di Barɛri Rikwaymɛnt

Gi di target shelf layf, gas miksɔp, stɔrɔj ​​tɛmpracha ɛn di ɔksijɛn transmishɔn rit we dɛn nid we i de. dis de alaw fכ evaluate di barεri-layer strכkchכ mכr akכrd.

Match di Lidding Film

Di liding film fɔ mach di tre sialant sɔfa ɛn gi di barɛri we dɛn nid, anti-fɔg, pil ɛn pankchɔ pefɔmɛns.

Chek di Siling Mashin

Trey dimɛnshɔn ɛn flɛnch jɔyometri fɔ kɔmpitabl wit di silin tul dɛn we de naw. Wan drɔin, kɔrɛnt tre sampul ɔ mashin-tul spɛsifikɛshɔn fɔ de bifo yu ɔda.

Kɔnfɛm di Tɛmpratura we yu nid fɔ yuz

Tɔk if di prɔdak go kol, frɔz, maykrowev, ɔt ful ɔ pastɔrayz. Nɔ pik di tre nɔmɔ frɔm di fakt se di strɔkchɔral rɛsin na polipropilɛn.

Kastom Ay Barɛri PP Trey Opshɔn dɛn

HSQY de sɔpɔt kɔstɔm barɛri tre prɔjek fɔ fud manifakta, mit prɔsesɔ, sifud kɔmni, supamaket grup, rɛdi-mil prodyusɔ ɛn pak distribyushɔn.

• Kastom eksternal lɔng ɛn wit

• Kastom intanɛnt dimɛnshɔn dɛn

• Kastom tre dip ɛn kapasiti

• Singl, dabl ɔ bɔku bɔku kɔmpawtmɛnt dɛn

• Kastom PP/EVOH/PE ɔ PP/EVOH/PP strɔkchɔ

• Kastom tre tik ɛn wet

• Klia, blak, wayt ɔ kɔstɔm kɔlɔ dɛn

• Kastom flɛnch wit ɛn kɔna jɔyometri

• Otomatik denest ficha dɛn

• Logo we dɛn ɛmbos ɔ mak fɔ risaykul

• Absorbent-pad we de mach

• High-barrier lidding-film we de mach

• I izi fɔ pul ɔ lɔk-sil opin sistem

• Print lidding film ɔ branded lɛbl sɔpɔt

• Nyu thermoforming mold divɛlɔpmɛnt

• Kastom katon ɛn palet pak

Kastom Mold Divɛlɔpmɛnt Prɔses

1. Aplikeshɔn rivyu: Di kɔstɔma de gi di kayn it, di wet fɔ di pat, di we aw dɛn pak am, di kɔndishɔn fɔ kip am ɛn di dimand we dɛn nid ɛvri ia.

2. Dimɛnshɔn rivyu: Dɛn dɔn kɔnfyus di ɛksternal saiz, intanɛnt volyum, dip, ɛdspɛs ɛn silin-mashin tul.

3. Matirial selekshɔn: Dɛn de ɛvaluet di PP gred, EVOH barɛri ɛn silant strɔkchɔ.

4. Trey dizayn: Dɛn dɔn divɛlɔp di wɔl angul, rib, flɛnch, stak ɛn denɛst ficha dɛn.

5. Di aprɔval fɔ drɔ: Di kɔstɔma kin kɔnfɔm di tɛknikal drɔin ɛn di tolɛreshɔn dɛn.

6. Tul: Dɛn kin mek mol dɛn fɔ mek tin dɛn we dɛn kɔl tɛmɔfɔm ɛn kɔt.

7. Sampul trayal: Dɛn de tɛst sampul dɛn wit di aktual it, liding film, gas miksɔp ɛn pak mashin.

8. Kɔmɛshɔnal validɛshɔn: Dɛn de ɛvaluet di sil intɛgriti, di barɛri pefɔmɛns, transpɔt ɛn shelf layf.

9. Mas prodakshɔn: Bɔlk prodakshɔn de bigin afta dɛn dɔn gri fɔ di tre ɛn pak sistɛm.

Kwaliti Kɔntrol fɔ Ay Barɛri PP Trey

Smɔl chenj dɛn na tre dimɛnshɔn, flɛnch flatnɛs ɔ multilayer distribyushɔn kin afɛkt silin ɛn gas ritɛnshɔn. So kwaliti kɔntrol fɔ kɔba ɔl tu di mɛkanikal ɛn pak-sistim pefɔmɛns.

Di tin dɛn we dɛn kin yuz fɔ inspekshɔn kin bi:

• Raw matirial ɛn multilayer-strakchɔ verifyeshɔn

• Trey ekstenal dimɛnshɔn dɛn

• Intanɛt dimɛnshɔn ɛn kapasiti

• Weyt we di trey gɛt

• Tiknɛs distribyushɔn

• Flange wit ɛn flatnɛs

• Edj ɛn kɔt kwaliti

• Klari ɛn kɔlɔ kɔnsistɛns

• Blak spat, jel ɛn sɔfayz kɔntaminɛshɔn

• Stacking ɛn denest pefɔmɛns

• Kɔmpreshɔn ɛn handel rɛsistɛns

• Low-temperature pefomans wen nid de

• Di kɔmpatibiliti fɔ di ɔt-sil

• Sial trɛnk ɛn peel pefɔmɛns

• Lik ɔ pakej-intɛgriti tɛst

• Ɔksijɛn transmishɔn tɛst we dɛn spɛsifa

• Pak kwantiti ɛn palet stebiliti

Fɔ Kɔmplians fɔ Fɔd-Kɔntakt

Fɔd-kɔntakt rikwaymɛnt dipen pan di rɛsin fɔmyulashɔn, multilayer strɔkchɔ, it tayp, kɔntakt tɛm, yuz tɛmpracha ɛn dɛstineshɔn makɛt.

Di wan dɛn we de bay fɔ tɔk klia wan se:

• Di kɔntri ɔ rijyɔn usay dɛn de go

• Dairekt kondishɔn fɔ kɔntakt it

• Di kayn it we dɛn kin it

• Di tɛm we pɔsin fɔ kɔntakt

• Frij, frɔz ɔ ɔt kɔndishɔn

• Diklareshɔn ɔ maykreshɔn tɛst we dɛn nid

• Restricted-substance rikwaymɛnt dɛn

• Batch ɔ traceability dɔkyumentri we dɛn nid

Di kɔmplians dɔkyumentri fɔ kɔnfyus fɔ di ɛksaktɔ tre strɔkchɔ ɛn ɔda. I nɔ fɔ tek am se wan ripɔt de aplay to ɛvri tre mɔdel, kɔlɔ ɔ maltilayer fɔmyulashɔn.

Yu tink se dɛn kin yuz di ay barɛri PP trey dɛn bak?

Dɛn kin risaykul polipropilɛn usay fayn fɔ gɛda, sɔt ɛn prɔsesin fasiliti dɛn de. Bɔt, wan ay barɛri PP tre nɔ min se i ikwal to wan simpul mono-PP tre .

Aktual risaykulbiliti dipen pan:

• Pεrsεnt כf PP in di tכtal strכkchכ

• EVOH, PE ɛn tay-layer kɔntinyu

• Tray kɔlɔ

• Film we dɛn kin ataya fɔ lid

• Lebul, ink ɛn adeziv dɛn

• Fɔd kɔntaminɛshɔn

• Lokal sɔt teknɔlɔji

• Rijinal risaykul akseptɛns lɔ dɛn

Di wan dɛn we de bay fɔ rivyu di kɔmplit pakej ɛn di dɛstineshɔn-maket gayd bifo dɛn mek klem lɛk 'ful risaykul' ɔ 'widely risaykul.'

Pakɛj ɛn Intanɛshɔnal Shipin

di ay barεri PP trey dɛn dεn nεst fכ ridyus stכrej εn transpכtεshכn vכlyum. Nɔmal wan dɛn kin pak dɛn insay plastic bag dɛn we de protɛkt dɛnsɛf ɛn ɛkspɔt katon dɛn.

Di tin dɛn we yu kin pik fɔ pak tin dɛn kin bi:

• Difain tre kwantiti pan wan bag

• Difayn bag kwantiti fɔ ɛni katon

• Kastom katon lɛbl dɛn

• Batch ɛn prodak kɔd dɛn

• Ekspɔt palet pakej

• Stretch wrapping ɛn kɔna protɛkshɔn

• Kastamɔ-spɛsifi k palet ayt

• Prayvet-lɛbul ɔda pak

Di kwantiti fɔ di kɔntena dipen pan di tre futprin, dip ɛn di pitch we dɛn de mek nɛst. Dip trey dɛn nɔmal fɔ nid mɔ shiping volyum ivin we dɛn tɔp dimɛnshɔn dɛn na di sem.

Wetin Mek Yu Pik HSQY as Yu High Barrier PP Tray Manufacturer?

• Dairekt manifakta saplai: Faktri sɔpɔt fɔ fud prɔsesɔ, mit pak, ritayla ɛn pak distribyushɔn.

• mכltipכl standad dip dεm: Di klia trey dɛn dεm we de kכva shalo, midul εn dip fכd pak rikwaymεnt dεm.

• Singl ɛn divayd trey dɛn : Wan-kɔmpatmɛnt ɛn tu-kɔmpatmɛnt mɔdel dɛn de.

• Multilayer material support: PP/EVOH/PE ɛn ɔda PP-based barɛri strɔkchɔ dɛn kin tɔk bɔt.

• Kastom thermoforming: Dimɛnshɔn, dip, kɔmpatmɛnt, kɔlɔ, flɛnch dizayn ɛn mold dɛn kin kɔstɔmayz.

• Trey-ɛn-film saplai: Dɛn kin ebul fɔ evaluate di ay barɛri liding film dɛn togɛda wit di tre .

• Ikwipmɛnt sɔpɔt: Dɛn kin rivyu di trey dimɛnshɔn agens di kɔstɔma in tre silin mashin.

• Sampul tɛst: Dɛn kin gi sampul fɔ sial, MAP , it-fit ɛn mashin tɛst.

• Bɔku it tre teknɔlɔji dɛn: HSQY de saplae fresh mit bak trey dɛn , MAP trey dɛn , VSP trey dɛn , PET trey dɛn ɛn CPET trey dɛn .

• Ɛkspɔt sɔpɔt: Dɛn kin kɔdinɛt di tin dɛn we dɛn nid fɔ du wit katɔn, palet ɛn intanashɔnal transpɔt.

Fɔ kɔvɛnshɔnal ɔvarap pak, di wan dɛn we de bay kin rivyu    fresh mit trey dɛn . Projek dɛm we nid fɔ pak wit vaykum skin kin rivyu    VSP trey dɛn.

Infɔmeshɔn we dɛn nid fɔ wan Ay Barɛri PP Trey Kɔt

Fɔ gɛt di kɔrɛkt kot fɔ di faktri, duya gi bɔku pan dɛn tin ya as yu ebul:

• tre mɔdel, sampul, drɔ ɔ foto we dɔn de

• Ekstanshal tre lɔng ɛn wit

• Dip we dɛn nid

• Intanɛt yusable dimɛnshɔn dɛn

• Di kayn it we dɛn kin it

• Weyt fɔ it we dɛn pak

• Dizayn fɔ wan ɔ divayd kɔmpawtmɛnt

• Rikwayd tre kɔlɔ

• Estimated oda kwantiti ɛn ɛni ia dimand

• Rikwayd PP/EVOH/PE ɔ ɔda barɛri strɔkchɔ

• Ɔksijɛn transmishɔn rit we dɛn nid, if dɛn spɛsifa am

• Di we aw dɛn kin pak, lɛk MAP ɔ standad ɔt silin

• Target shelf layf

• MAP gas miksɔp

• Stɔrej ɛn transpɔt tɛmpracha

• Maykrowev, friz ɔ pasteurization rikwaymɛnt

• Lidding-film strɔkchɔ ɛn di wit

• I izi-pil, lɔk-sil ɔ anti-fɔg rikwaymɛnt

• Absorbent-pad dimɛnshɔn ɛn kapasiti

• Tray sial mashin brand ɛn mɔdel

• Tul ɔ kaviti drɔin

• Embossed logo ɔ prayvet-lɛbul rikwaymɛnt

• Fɔd-kɔntakt dɔkyumentri we dɛn nid

• Katon ɛn palet pak we dɛn nid

• Destination port ɔ di adrɛs fɔ di delivri

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt di ay barɛri PP trey dɛn

Wetin dɛn mek wan ay barɛri PP tre frɔm?

na PP-bεys tεmכfכm tre we gεt fכnshכnal gas-barεri layεr lεk EVOH. Di strɔkchɔ kin gɛt PE, PP silan layers ɛn adhesive tay layers bak.

Wetin mek dɛn de yuz EVOH na PP it trey dɛn ?

EVOH de gi strɔng rɛsistɛns to ɔksijɛn ɛn gas transmishɔn. Dɛn kin put am insay wan multilayer strɔkchɔ so di polima layers we de rawnd kin gi mɔstɔ protɛkshɔn, mɛkanikal trɛnk ɛn siling pefɔmɛns.

Na wan ay barɛri PP tre di sem wit wan MAP tre ?

Nɔto jɔs dat. High baria PP de diskraib di tre matirial. MAP de dεskrεb wan pak prכsεs we di intanεt εya de riples wit wan kכntroled gas miksכp. Wan fayn ay barɛri PP tre kin yuz insay wan MAP sistɛm.

Yu tink se yu kin yuz wan standad PP tre fɔ MAP pak?

Standart mono-PP kin nɔ gi inɔf gas barɛri fɔ di distribyushɔn tɛm we dɛn nid. di tre εn film fכ sεlekt akɔdin to di tכgεt כksijεn transmishכn, gas miksכp εn shelf layf.

Us it dɛn kin pak insay ay barɛri PP trey dɛn ?

Di tin dɛn we dɛn kin yuz na fresh mit, bɔd, fish, sifud, sosish, mit we dɛn dɔn prosɛs, it we dɛn dɔn kol, it we dɛn rɛdi fɔ kuk ɛn sɔm tin dɛn we dɛn dɔn pik frɔm chiz ɔ dairy-based.

Us standad saiz dɛn HSQY de gi?

di prodak dεm we de naw de mεnli yuz 180 × 120 mm εn 200 × 140 mm futprin, wit dip inklud lεk 20, 25, 35, 45, 50, 55, 60, 65 εn 70 mm.

Divayd ay barɛri trey dɛn de?

Yɛs. HSQY naw de sho singl-kɔmpatmɛnt ɛn tu-kɔmpatmɛnt klia barɛri trey dɛn . Atikul kɔmpawtmɛnt layout dɛn kin evalyu tru kɔstɔm mold divɛlɔpmɛnt.

Yu tink se ay barɛri PP trey dɛn maykrowev sef?

trey dɛn we yu dɔn pik kin fayn fɔ ri-hit, bɔt maykrowev pefɔmɛns fɔ chɛk fɔ di ɛksaktɔl tre , it, ɔt tɛm ɛn film-rimɔv instrɔkshɔn dɛn. PP kɔntinyu nɔmɔ nɔ de gi garanti fɔ maykrowev fayn.

Yu tink se ay barɛri PP trey dɛn kin frɔz?

Dɛn kin tɛst di prɔdak dɛn we dɛn dɔn pik fɔ si if dɛn dɔn frɔz. Lɔw-tɛmpracha impak, stak lod, film fleksibiliti ɛn friz-thaw kɔndishɔn dɛn fɔ evalyu.

Dis trey dɛn fit fo retort prosesin?

Di standad prodakt dɛn nɔ fɔ ɔtomɛtik trit as retortable. Ritort aplikeshɔn dɛn nid fɔ gɛt spɛshal divɛlɔp tre ɛn film strɔkchɔ we dɛn validet fɔ di prɛshɔn, tɛmpracha ɛn prɔsesin tɛm we dɛn nid.

Us liding film dɛn fɔ yuz?

Yuz wan ay barɛri liding film wit wan silan layt we kɔmpitabl wit di ɛksaktɔ tre sɔfays. Film selekshɔn fɔ tink bak bɔt ɔksijɛn barɛri, anti-fɔg, trɛnk fɔ pul, pankchɔ rɛsistɛns ɛn mashin sɛtin.

Wetin mek wan paket we gɛt ay barɛri we dɛn sial kin lɔs gas?

Di tin dɛn we kin mek i apin na wan fim we nɔ fayn, tre flɛnch we gɛt dɔti, wrinkles, silin we nɔ kɔmplit, chanɛl lik, trey dɛn we dɔn pwɛl, we nɔ kɔrɛkt di siling paramita ɔ we nɔ du di barɛri pefɔmɛns.

Yu tink se dɛn kin put absɔbɛnt pad dɛn insay di tre ?

Yɛs. Yu kin mek di pad dɛn we de absɔb mach wit mit, bɔd ɛn sifud prɔdak dɛn. Di pad fɔ fit insay di tre we nɔ go ambɔg di silin flɛnch.

Yu tink se di tre kin bi kɔstɔm print?

Nɔmal wan dɛn kin ad branding tru ɛmbos logo, print liding film, lɛbl, sliv ɔ ɔda katon. Dairekt printin pan di fɔm tre kin evalyu bɔt nɔto di wan ɔ di bɛst branding we fɔ ɛvri prɔjek.

Yu tink se yu kin kɔstɔmayz di tre saiz ɛn kɔlɔ?

Yɛs. Dimenshɔn, dip, kɔmpatmɛnt, matirial strɔkchɔ, tre wet, flɛnch dizayn, kɔlɔ ɛn ɛmbos ditil dɛn kin kɔstɔmayz sɔbjɛkt to tul ɛn MOQ.

Na ay barɛri PP trey dɛn risaykul?

Dɛn kin aksept dɛn na sɔm PP risaykul sistɛm dɛn, bɔt di aktual risaykulbiliti dipen pan di multilayer strɔkchɔ, tre kɔlɔ, ataya film, it kɔntaminɛshɔn ɛn lokal infrastukchɔ.

Wetin na di MOQ fɔ HSQY ay barɛri PP trey dɛn ?

Di rεfrεns MOQ fכ sεlekt standad prodakt na aprכksimatli 30,000 pies. Kastom kɔlɔ, barɛri strɔkchɔ ɛn nyu mold kin nid difrɛn minim kwantiti.

A kin aks fɔ sampul bifo a mek ɔda?

Stok sɛmpul kin de fɔ it-fit, stak, lidding-film, silin-mashin ɛn MAP tɛst. Sample avaylabl ɛn freyt tɛm fɔ kɔnfɔm wit di sɛl tim.

Us tɛst dɛn fɔ dɔn bifo dɛn mek am fɔ kɔmɛshɔn?

Di tɛst dɛn we dɛn kin rɛkɔmɛnd inklud tre -mashin fit, sil trɛnk, peel pefɔmɛns, lik tɛst, gas analisis, ɔksijɛn transmishɔn usay nid de, lɔw-tɛmpracha ɔ rihit tɛst, transpɔt tɛst ɛn kɔmɛshɔnal shelf-layf validɛshɔn.

Rikwest wan Ay Barɛri PP Trey Kɔt

Yu de luk fɔ wan ay barɛri PP tre manifakta, PP/EVOH it tre spɔlayt ɔ kɔstɔm MAP pak sɔlvishɔn?

Kɔntakt HSQY fɔ aks fɔ standad tre saiz, sampul, barɛri strɔkchɔ rɛkɛmɔndeshɔn, kɔmpitabl lidding film, kɔstɔm mold sɔpɔt, ɔlsay prayz ɛn intanashɔnal shiping infɔmeshɔn.

       Rikwest fɔ kot di prayz