PVC Sheet fɔ Plɛy Kad

PVC Plɛy Kad Shit fɔ Print ɛn Kad Manufakchurin

PVC ple kad sheet na wan opaque rigid plastic sabstret we dɛn mek fɔ print, lamin, kɔt, day-kat ɛn kɔnvɔyt to finish ple kad. Dɛn kin gi am as raw sheet matirial pas fɔ gi am as kɔmplit dɛk fɔ kad.

We yu kɔmpia am wit kɔvɛnshɔnal pepa kad stok, PVC ple kad matirial de gi big resistans to mɔstɔ, tear, ed damej ɛn ripit hanlin. I smol wayt surface de sɔpɔt ditayl artwok, stebul kala riprodakshɔn ɛn kɔnsistɛns prɔsesin pan kɔmpitabl kad-printin ɛn kɔnvɔyt ikwipmɛnt.

HSQY de saplae wayt rigid PVC ple kad shit to kad manifakta, printin kompini, kasino prodak saplae, bod gem publisha, promoshonal prodak manifakta, kad konvayt en wholesale distribyushɔn.

Standart opshɔn dɛn inklud tiknɛs frɔm 0.20mm to 0.35mm ɛn sheet saiz dɛn we dɛn mek fɔ kɔmɔn printin layout. Kastom tiknes, dimɛnshɔn, opasiti, sɔfayz tritmɛnt ɛn matirial fɔmyulashɔn dɛn kin tɔk bɔt akɔdin to di kad strɔkchɔ we dɔn dɔn ɛn di prodakshɔn prɔses.

       Rikwest PVC Kad Shit Sampul dɛn    

PVC pley kad sheet prodakt rɛnj

HSQY de gi plɛnti rigid PVC shit spɛsifikɛshɔn fɔ poker kad, kasino kad, tarot kad, gem kad, ɛdyukeshɔn kad ɛn prɔmoshɔnal kad prodakshɔn.

• Wait PVC Shit fɔ Ple Kad fɔ kad printa, kɔnvɔta ɛn ɔlsay kad manufakchurin.

• Glossy White PVC Playing Card Sheet fɔ UV ɔfset printin ɛn print kad prodakshɔn.

• Standart-Sayz PVC Ple Kad Shit insay 650 × 465mm, 670 × 470mm, 680 × 480mm ɛn 935 × 675mm fɔmat.

Di kɔrɛkt sheet fɔ pik akɔdin to di we aw dɛn de print, di prɛs saiz, di kad dimɛnshɔn, nɔmba fɔ di layt dɛn we dɛn dɔn lamin, di tik we dɛn dɔn dɔn di dɛk, di opasiti we dɛn nid ɛn di shuffling pefɔmɛns we dɛn want.

PVC Plɛy Kad Sheet Spɛsifikeshɔn dɛn

Di spesifikeshɔn dɛn we de dɔŋ ya de ripresent di HSQY PVC pley kad shit opshɔn dɛn we dɛn kin gi kɔmɔn. Faynal tolɛreshɔn, sɔfayz tritmɛnt ɛn pefɔmɛns fɔ kɔnfɔm akɔdin to di prodak gred we dɛn dɔn pik ɛn di kɔstɔma prodakshɔn prɔses.

Teknik valyu ɛn di opshɔn dɛn we de kin difrɛn bay di prɔdak gred. Di wan dɛn we de bay fɔ aks fɔ spɛsifikɛshɔn shit ɛn tɛst sɛmpul dɛn bifo dɛn gri fɔ mek dɛn prodyuz bɔku bɔku wan.

Ki Pɔfɔmɛnshɔn Rikwaymɛnt fɔ Kad-Grɛd PVC Shit dɛn

Jɛnɛral-pɔpɔs wayt PVC sheet nɔ ɔtomɛtik fayn fɔ ple kad prodakshɔn. Kad-grɛd matirial fɔ gi stebul pefɔmɛns ɔlsay na di printin, lamineshɔn, kɔt ɛn ripit kad hanlin.

• High opacity: I de ɛp fɔ mek yu nɔ si di artwok, kɔlɔ ɔ mak dɛn na wan say tru di ɔda say.

• Konsistent tiknes: Sɔpɔt yunifom lamination, prɛdiktibɛl finish dɛk tiknes ɛn kɔnsistɛns kad handlin.

• Gud sheet flatnes: I de ɛp sheet fɔ fid tru printin, kɔt, laminating ɛn day-cutting ikwipmɛnt.

• Stebul dimɛnshɔn: Ridyus rɛjista prɔblɛm ɛn dimɛnshɔnal chenj dɛn we dɛn de print ɛn ɔt lamination.

• Smɔl printin surface: I de sɔpɔt shap tɛks, fayn layn dɛn, ditayla artwok ɛn kɔnsistɛns ink kɔvarej.

• Suitable surface energy: I de ɛp kɔmpitabl ink ɛn kɔtin fɔ bon to di nɔ-absorbent PVC surface.

• Kontrol fleksibiliti: I de alaw di kad we dɔn dɔn fɔ fleks we i de shuffle we i de kip di shep we i want.

• Klin day-kat: I de ɛp fɔ mek di kad dɛn we gɛt wanwɔd, di ed dɛn we smɔl ɛn kɔna dɛn we rawnd kɔnsistɛns.

• Mɔstɔ rɛsistɛns: I de ridyus di wata we de absɔp, swɛlin ɛn difɔmeshɔn we gɛt fɔ du wit di humidity we yu kɔmpia am wit pepa-based stok.

• Di klin we di say we yu de klin: I de mek di kad dɛn we dɛn print nɔ klin, di say dɛn we di krɔs de, skrach, ripɛl ɛn di bad tin dɛn we pɔsin kin si na di kad dɛn we dɛn print nɔ bɔku.

• Batch kɔnsistɛns: Sɔpɔt ripit ɔda wit kɔnsistɛns tiknɛs, waytnɛs, opasiti ɛn sɔfa kwaliti.

Aw fɔ Pik PVC Shit Tiknɛs fɔ Ple Kad

Di kɔrɛkt tik we di shit tik de dipen pan di tik we dɛn nid fɔ dɔn kad, di nɔmba fɔ di matirial layers, di wet we di kɔtin gɛt, di lamination strɔkchɔ, di kad dimɛnshɔn ɛn di stiffness we yu want.

Dɛn rɛnj ya na jenɛral sɛlɛkshɔn rɛfrɛns pas fiks lɔ dɛn. 0.30mm raw shit nɔ kin rili prodyuz 0.30mm finish kad bikɔs kɔtin, print layers, ɔvlay ɛn laminating strɔkchɔ kin chenj di fayn tik.

Di kɔstɔma dɛn fɔ tɛst sɔm tiknes dɛn we dɛn de yuz di aktual kad dimɛnshɔn, ink, kɔtin, lamineshɔn prɛshɔn, tɛmpracha, kɔt day ɛn finish prɔses.

Single-Layer ɛn Multilayer PVC Kad Kɔnstrɔkshɔn

PVC Kad dɛn we dɛn print wan layt

Insay wan layt kɔnstrɔkshɔn, dɛn kin print art wok dairekt pan wan opaque PVC sheet. Dɛn kin yuz varnish ɔ kɔtin we de protɛkt am fɔ mek di say we yu de go de te ɛn fɔ mek i ebul fɔ ol am fayn.

Singl-layer prodakshɔn kin ridyus di manufakchurin stɛp dɛn, bɔt di sheet fɔ gi inof tik, opasiti, printin adheshon ɛn sɔfays protɛkshɔn fɔ di kad aplikeshɔn we dɛn want.

Multilayer Laminated PVC Kad dɛn

Multilayer kad kin kam togɛda print PVC sheet, wan opaque kor ɛn protɛktiv ɔvlay. Dis strɔkchɔ de alaw di wan dɛn we de mek fɔ ajɔst di tik we dɛn dɔn dɔn, di opasiti, stiffness, print protɛkshɔn ɛn di sɔfayz tɛkstɔr.

Di matirial dɛn we dɛn pik fɔ kɔmpitabl wit di laminating tɛmpracha, prɛshɔn, dwɛl tɛm ɛn adhesive ɔ ɔvlay sistɛm. Ɔt pasmak ɔ prɛshɔn we nɔ ivin kin afɛkt di sheet flatnɛs, dimɛnshɔn ɛn print rɛjista.

Opaque Kor ɛn Sho-Tru Kɔntrol

Kad dɛn we dɛn kin yuz fɔ kɔmpitishɔn gem dɛn fɔ mek di pleya dɛn nɔ no di fes-sayd at wok tru di kad bak. High-opacity wayt matirial, inkrεs tiknes כ wan adishכnal opaque kor kin εp fכ kכntrכl sho-thru.

Opacity fɔ tɛst wit di aktual artwok bikɔs dak kɔlɔ, ebi ink kɔvarej ɛn ay-kɔntrast dizayn kin afɛkt di rizɔlt.

Printing Kompatibiliti fɔ PVC Plɛy Kad Matirial

PVC gɛt plastic we nɔ de absɔb. Di printa, ink kemistri, sɔfayz tritmɛnt ɛn di kɔring prɔses fɔ so kɔmpitabl wit rigid PVC.

UV Ɔfset Printin we yu de print

Dɛn kin yuz UV ɔfset printin fɔ mek dɛn mek kad dɛn we gɛt bɔku bɔku ple. UV-curable inks de gi kwik kwik wan ɛn dɛn kin riprodyuz ditayla imej, smɔl tɛks, fayn layn ɛn ful-kɔlɔ artwok pan fayn PVC sɔfays.

Di kɔstɔma dɛn fɔ chɛk if ink adheshon, di ɛnaji we de mɛn am, di tɛmpracha we di shit de du, di we aw i de stak ɛn di we aw i de mek i nɔ skrach bifo dɛn prodyuz am fɔ kɔmɛshɔn.

Fɔ Print na Skrin

Yu kin pik skrin printin fɔ sɔlid kɔlɔ dɛn, spɛshal ink dɛn, dɛkɔretiv ifɛkt dɛn ɛn sɔm shɔt ɔ midul volyum kad prɔjɛkt dɛn we yu dɔn pik. Di ink fɔ fɔmulayt fɔ PVC ɔ plastic sabstret dɛn we nɔ de absɔb.

Dijital ɛn Inkjet Printin

Dijital printin kin fayn fɔ sampul, protɔtayp, pɔsnalayz kad ɛn smɔl prodakshɔn rɔn. Standard UV-offset PVC sheet nɔ fɔ tek am ɔtomɛtik wan fɔ wok wit ɛvri inkjet, laser, toner ɔ dijital prɛs.

We yu de aks fɔ dijital-printin matirial, gi di printa brand, mɔdel, ink ɔ tona tayp, fusing tɛmpracha, di sheet saiz we yu nid ɛn di we aw i de fid.

Surface Energy ɛn Ink Adhesion

Ink adheshon dipen pat pan di surface enaji na di PVC sheet. Di kɔstɔma dɛn we gɛt wan patikyula dayn-lɛvɛl rikwaymɛnt fɔ tɔk bɔt di valyu we dɛn want ɛn di we aw dɛn de tɛst bifo dɛn ɔda.

Di tritmɛnt we de na di wɔl kin go dɔŋ as tɛm de go ɔ i kin afɛkt bay we dɛn de kip am, we dɛn gɛt dɔti ɛn aw dɛn de ol am. Prodakshɔn stok fɔ kip klin, dray ɛn protɛkt te dɛn print am.

Aw Shit Sayz De Afɛkt di Printin Efyushɔn

Di dimɛnshɔn dɛn fɔ di shit fɔ mach di say we dɛn kin yuz fɔ print na di prɛs ɛn di we aw dɛn mek di kad-impɔzishɔn. If yu pik di kɔrɛkt sheet saiz, i kin ridyus di trim west, impruv di autput fɔ ɛni shit ɛn mek i izi fɔ day-kat rɛjista.

Gi di printin prɛs mɔdel, maksimam sheet fɔmat, gripa alawɛns, di kad dimɛnshɔn dɛn we dɔn dɔn ɛn di nɔmba fɔ di kad dɛn fɔ ɛni shit we yu de aks fɔ kɔstɔm saiz.

Surface Finishes ɛn Plɛy Kad Fil

Surface finish de afɛkt di apinɛns, glare, frikshɔn, grip, kad muvmɛnt ɛn di ɔvala taktil ɛkspiriɛns fɔ di kɔmplit dɛk.

Glossy PVC pley kad sheet

Glossy white na di standad opshɔn. I de gi wan smol apinans, strɔng kɔlɔ prɛzɛnteshɔn ɛn lɔw sɔfays tɛkstɔr. Di fainal shuffle fil de dipen bak pan di ink, varnish, ovalay ɛn finishing prɔses.

Mat PVC pley kad sheet

Mat surface kin ridyus glare ɛn mek yu si saf saf. Ink density, coating adhesion ɛn kad-to-kad frikshɔn fɔ tɛst wit di mat surface we yu dɔn pik.

Tekstur ɛn Ɛmbos Kad Surfaces

Dɛn kin tink bɔt sɔm tɛkstɔr, linin, san-grɛyn ɔ ɛmbos ifɛkt dɛn we dɛn dɔn pik we dɛn nid fɔ gɛt wan patikyula grip ɔ kad fil. Avaylabl dipen pan di prodak strɔkchɔ, prodakshɔn kwantiti ɛn di we aw dɛn mek am.

Protektiv Kɔtin ɛn Ɔvlay

Varnish, klia kɔtin ɛn protɛktiv ɔvlay kin mek yu nɔ ebul fɔ abrashɔn, an ɔyl, ink wear ɛn ripit shuffling. Di kɔtin fɔ tɛst fɔ adheshon, fleksibiliti, frikshɔn ɛn blok bitwin stak kad dɛn.

PVC Plɛy Kad Manufakchurin Prɔses

1. Matirial sɛlɛkshɔn: Kɔnfɛm di PVC tik, sheet saiz, kɔlɔ, opasiti, sɔfa ɛn printin tritmɛnt.

2. Pripres ɛn impɔzishɔn: Arenj di kad fes, bak, blɔd eria, rɛjista mak ɛn kɔt pozishɔn akɔdin to di sheet fɔmat.

3. Atwok printin: Print di kad fes ɛn bak yuz wan kɔmpitabl UV ɔfset, skrin ɔ dijital prɔses.

4. Ink curing: Kur ɔ dray di ink we yu nɔ ɔva ɔt, distɔrj ɔ blok di PVC sheet dɛn.

5. Kɔtin ɔ ɔvlay: Put wan kɔmpitabl varnish, protɛktiv kɔtin ɔ klia ɔvlay we nid de.

6. Lamination: Laminate di print sheet ɛn kɔr layers we dɛn de yuz multilayer kad strɔkchɔ.

7. Sheet kondishɔn: Alaw laminated ɔ coated sheet fɔ stebul bifo dɛn kɔt am prɛsishɔn.

8. Day-kat: Kɔt kad dɛn to di dimɛnshɔn dɛn we yu nid yuz wan fayn stɛl-rul, panch ɔ ɔtomatik day-kat sistem.

9. Kɔna rawndin: Prodyuz kɔnsistɛns kɔna rayus fɔ sɔpɔt sef hanlin ɛn yunifom kad apinɛns.

10. Inspekshɔn ɛn sɔt: Chɛk print rɛjista, kad dimɛnshɔn, opasiti, sɔfays dɛfɛkt ɛn kɔnsistɛns akɔdin to di dɛk.

11. Dek asembli ɛn pak: Arenj kad dɛn di rayt sikyud ɛn pak dɛn insay bɔks ɔ ɔda pak we dɛn dɔn pak.

Aplikeshɔn fɔ PVC Plɛy Kad Shit dɛn

Kasino ɛn Poker Plɛy Kad dɛn

Kasino ɛn poker kad dɛn nid stebul dimɛnshɔn, kɔntrol opasiti, kɔnsistɛns kad tik ɛn resistans to shuffling ɔltɛm. PVC fayn fɔ prɔjek dɛn usay di durabiliti ɛn di mɔstɔ rɛsistɛns impɔtant.

Bod Gem ɛn Tebultɔp Kad dɛn

PVC sheet dɛn kin chenj to kad fɔ bod gem, tebul gem, pati gem, rol-play gem ɛn gem kɔmpɔnɛnt dɛn we dɛn kin yuz bak.

Tarot ɛn Ɔrakl Kad dɛn

Dɛn kin divɛlɔp kɔstɔm tiknɛs ɛn sheet layout fɔ tarot, ɔrakl ɛn ɔda ovasayz spɛshal kad dɛn we nid fɔ gɛt difrɛn kad fil ɛn ed dɛn we go de te.

Kad dɛn we dɛn kin gɛda ɛn we dɛn kin tred

Opaque printable PVC kin bi kɔnsidɛrɛd fɔ sɔm kɔlektif kad ɛn tredin kad projɛkt dɛn we nid mɔstɔ rɛsistɛns, klin printin ɛn durable edj.

Promoshɔnal ɛn Branded Plɛy Kad dɛn

Yu kin yuz PVC dɛk dɛn we dɛn print fɔ kɔstɔm fɔ gi kɔpɔt gift, fɔ mek pipul dɛn no bɔt brand, fɔ mek ivintɛns, fɔ ɔspitul pipul dɛn, fɔ advatayz kampen ɛn fɔ mek pipul dɛn no bɔt tin dɛn.

Edukeshɔnal ɛn Trenin Kad dɛn

PVC sheet dɛn we kin te, fayn fɔ flash kad dɛn we dɛn kin ol bɔku tɛm, tin dɛn we dɛn kin yuz na klasrum, kad dɛn fɔ lan langwej, trenin tul dɛn ɛn instrɔkshɔnal prɔdak dɛn we dɛn kin yuz bak.

PVC pley kad vs. Pepa pley kad

PVC nɔto ɔtomɛtik di bɛst sabstret fɔ ɛvri kad prɔjek. Bayer dɛn fɔ kɔmpia durabiliti, prodakshɔn ikwipmɛnt, kad fil, sastaynabiliti rikwaymɛnt, ɔda kwantiti ɛn totɛl manufakchurin kɔst.

Kastom PVC Plɛy Kad Sheet Opshɔn dɛn

HSQY kin mek PVC kad sabstret dɛn akɔdin to di prodakshɔn rikwaymɛnt dɛn fɔ printin kɔmni dɛn, ple kad faktri dɛn, gem manifakta dɛn ɛn ɔlsay distribyushɔn dɛn.

• Kastom sheet tik ɛn tik tolɛreshɔn.

• Kastom sheet wit ɛn lɔng.

• Dimɛnshɔn dɛn fɔ di shit we kɔmpitabl wit prɛs.

• Kastom waytnɛs ɛn opasiti rikwaymɛnt dɛn.

• Glossy, mat ɔ sɛlɛkɛt tɛkstɔr sɔfays.

• Virgin ɔ sɔm risaykul-kɔntinɛnt fɔmyulashɔn dɛn we dɛn dɔn pik.

• Surface tritmɛnt fɔ UV ɔfset, skrin ɔ spɛsifikɛd printin sistem.

• Kompatibiliti wit kotin ɔ laminɛshɔn prɔses.

• Protektiv film, pepa intaliv ɔ dust-kɔntrol pak.

• Kastom palet dimɛnshɔn ɛn ɛkspɔt pak.

• OEM, wholesale ɛn ripit-ɔda saplai.

       Send Yu Kastɔm ​​Spɛsifikeshɔn    

Kwaliti Kɔntrol fɔ PVC Plɛy Kad Shit dɛn

Stebul raw matirial kwaliti de ɛp di wan dɛn we de mek kad fɔ ridyus di printin dɛfɛkt, rɛjista mistek, lamination prɔblɛm, kɔt difrɛns ɛn finish-kad rijɛkt rɛt.

Sampul Testing Bifo Bulk Prodakshɔn

A4 sɛmpul dɛn kin yuz fɔ prɛliminari ɛvalueshɔn, bɔt dɛn kin rikɔmɛnd fɔ mek dɛn tray fɔ du ful prodakshɔn bifo dɛn gri fɔ mek dɛn gi big volyum ɔda.

Di trayal fɔ riprodyuz di kɔmɛshɔnal manufakchurin prɔses we dɛn bin want, we inklud:

• Aktual printin pres ɛn ink sistem.

• Nɔmal printin spid ɛn kɔring ɛnaji.

• Ful artwok ɛn ink kɔvarej.

• Prodakshɔn kɔtin ɔ ɔvlay.

• Lamination temperechur, prɛshɔn ɛn tɛm fɔ de.

• Komershal kot day ɛn kɔna rayus.

• Finished kad tik ɛn dɛk ayt.

• Shuffle, fleks, abrashɔn ɛn mɔstɔ tɛst.

• Opasiti evalueshɔn yuz di aktual frɔnt ɛn bak artwok.

Pakɛj ɛn Intanɛshɔnal Shipin

PVC ple kad sheet dɛn nɔmal fɔ stak, protɛkt frɔm dɔst ɛn surface damej, rap wit protɛktiv matirial ɛn sikyuɔr pan ɛkspɔt palet.

• Shit protɛkshɔn: Dɛn kin yuz PE film, kraft pepa, intaliv ɔ ɔda tin dɛn we de protɛkt am akɔdin to di sɔfa we dɛn nid.

• Stak protɛkshɔn: Dɛn kin alaynɛd ​​ɛn protɛkt di sheet dɛn fɔ ridyus di ed damej, bɛnd ɛn kɔntaminɛshɔn.

• Palet pak: Yu kin pik ɛkspɔt palet, kɔna protɛkshɔn ɛn strap akɔdin to di sheet saiz ɛn shipmɛnt wet.

• Kastom mak: Dɛn kin tɔk bɔt nyutral lɛbl ɔ kɔstɔmayz palet mak.

• Kɔntena lod: Dɛn kin kɔl di kwantiti fɔ lod afta dɛn dɔn kɔnfɔm di tik, di dimɛnshɔn fɔ di shit, di wet we di palet gɛt ɛn di we aw dɛn pak am.

• Shipping ports: Di kɔmɔn lod pɔt dɛn na Shanghai ɛn Ningbo.

Di rεfrεns prodakshכn lida tεm na aprכksimatli 7–15 dez afta spεsifikεshכn εn כda kכnfכm. Fɔmyulashɔn dɛn we dɛn kɔstɔmayz, spɛshal sɔfays, big ɔda ɛn prodakshɔn scheduling kin afɛkt di las delivri de.

Wetin Mek Yu Pik HSQY as Yu PVC Ple Kad Shit Splaya?

• Dairekt manifakta saplai: I fayn fɔ kad faktri, printa, kɔnvɔta, distribyushɔn ɛn ay-volyum bayer.

• Kad-spɛsifi k tiknes: Bɔku tin rigid PVC spɛsifikɛshɔn dɛn de fɔ ple kad prodakshɔn.

• Fɔmat dɛn we kɔmpitabl fɔ prɛs: Dɛn kin gi 4 standad shit saiz dɛn ɛn dimɛnshɔn dɛn we dɛn kɔstɔmayt.

• Kastom manufakchurin: Dɛn kin tɔk bɔt tik, dimɛnshɔn, opasiti, wayt, sɔfa ɛn fɔmyulashɔn.

• Printin sɔpɔt: Dɛn kin ebul fɔ evalyu di matirial dɛn fɔ UV ɔfset, skrin ɛn spɛsifikɛd dijital-printin sistem dɛn.

• Sampul savis: Dɛn kin arenj sampul fɔ print, lamin, kɔt ɛn finish-kad tɛst.

• Kwaliti inspekshɔn: Di men tin dɛn kin inklud tik, dimɛnshɔn, flat, kɔlɔ, opasiti ɛn di we aw di sɔfa de luk.

• Ekspɔt pak: Kastɔm ​​palet, lɛbl, protɛktiv matirial ɛn intanashɔnal shiping sɔpɔt de.

• Plastik sabstret dɛn we gɛt fɔ du wit am: Di wan dɛn we de bay kin rivyu HSQY bak PVC sheet dɛn ɛn PVC printin sheet dɛn.

Infɔmeshɔn we Yu nid fɔ gɛt Kɔrɛkt Kɔt

Fɔ gɛt kɔrɛkt PVC ple kad shit prays ɛn prodak rɛkɛmɔndeshɔn, gi dɛn infɔmeshɔn ya:

• Rikwayd raw sheet tik.

• Di sheet wit ɛn lɔng we dɛn nid.

• Finished kad wit, lɔng ɛn kɔna rayus.

• Target finish kad tiknes.

• Single-layer ɔ multilayer kad kɔnstrɔkshɔn.

• Rikwayd wayt ɛn opasiti.

• Glos, mat ɔ tɛkstɔr sɔfays.

• Printin pres brand ɛn mɔdel.

• UV ɔfset, skrin, inkjet, toner ɔ ɔda we fɔ print.

• Rikwayd sɔfayz ɛnaji ɔ dayn lɛvɛl, we i apɔynt.

• Kotin, varnish, ɔvlay ɔ laminɛshɔn prɔses.

• Lamination temperechur ɛn prɛshɔn.

• Virgin ɔ risaykul-kɔntinɛnt matirial prɛferɛns.

• Teknik, envayrɔmɛnt ɔ rigyuletɔri dɔkyumɛnt dɛn we dɛn nid.

• Trayal kwantiti, bulk kwantiti ɛn ɛstimat ɛni ia kɔnsɔmshɔn.

• Destination port ɛn prɛferɛd tred tɛm dɛn.

       Rikwest Ɔlsay Prayz    

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt PVC Ple Kad Shit dɛn

Dis prodak na finished deck of playing cards?

Nɔ, na PVC sheet we nɔ print we dɛn kin gi as raw matirial to di wan dɛn we de mek ple kad, di wan dɛn we de print ɛn di wan dɛn we de kɔnvɔyt kad. I fɔ print, kɔt ɔ lamin, day-kat ɛn pak am bifo i bi dɛk we dɔn dɔn.

Us tik we dɛn kin yuz fɔ ple kad fɔ PVC?

Tiknes frɔm lɛk 0.27mm to 0.35mm dɛn kin tink bɔt fɔ ple kad prodakshɔn. Dɛn kin yuz tin dɛn we tan lɛk tin dɛn we dɛn mek wit bɔku layers, we tik tik sheet dɛn kin mek i stif mɔ ɛn i kin mek pɔsin fil lɛk se i ebi kad.

Di tik we di raw sheet tik di sem wit di tik we di kad we dɔn dɔn tik?

Nɔto ɔltɛm. Print layers, varnish, coatings, overlays, adhesives ɛn laminated kɔr matirial dɛn kin mek di fayn kad tik. Kɔnfɛm di kɔmplit kad kɔnstrɔkshɔn bifo yu pik di raw sheet.

Yu tink se PVC ple kad dɛn nɔ de mek wata pas?

PVC insɛf nɔ de absɔb wata izi wan ɛn i de gi bɔku bɛtɛ mɔstɔ rɛsistɛns pas pepa kad stok we dɛn nɔ trit. Di wata resistans fɔ di kad we dɛn dɔn kɔmplit de dipen bak pan in ink, kɔtin, laminated edj ɛn ɔl di kɔnstrɔkshɔn.

Yu tink se dɛn kin print PVC ple kad sheet dɛn bay we dɛn de yuz ɔfset printin?

Yɛs. Dɛn kin print fayn fayn sheet dɛn bay we dɛn yuz UV ɔfset ikwipmɛnt we dɛn mek fɔ plastic sabstret dɛn we nɔ de absɔb. Di ink we dɛn dɔn pik, di tritmɛnt we dɛn dɔn gi di sɔfa, di ɛnaji we de mɛn ɛn di spid we dɛn de prodyuz fɔ tɛst bifo dɛn prodyuz am bɔku bɔku wan.

Yu tink se standad PVC ple kad sheet dɛn kin print wit inkjet printa?

Nɔto ɔl standad PVC sheet dɛn kɔmpitabl wit akyu inkjet printin. Nɔmal wan, fɔ print wit inkjɛt, dɛn nid fɔ gɛt spɛshal tritmɛnt ɔ kɔt say. Gi di printa ɛn ink mɔdel so dat dɛn go ebul fɔ evalyu wan fayn matirial.

Yu tink se dɛn kin print di PVC sheet dɛn wit lɛsa?

Laser ɔ toner printin kɔmpatibiliti dipen pan di printa, fusing tɛmpracha ɛn sheet fɔmyulashɔn. Standard PVC kin difɔm ɔnda ɔt pasmak, so di ɛksaktɔl mashin ɛn di prodakshɔn kɔndishɔn dɛn fɔ rivyu bifo yu yuz am.

Yu tink se dɛn kin laminate PVC ple kad sheet dɛn?

Yɛs. PVC sheet kin kam togɛda insay multilayer kad strɔkchɔ ɔ laminated wit kɔmpitabl protɛktiv ɔvlay. Dɛn fɔ tɛst di matirial dɛn na di tɛmpracha, prɛshɔn ɛn di tɛm we dɛn want fɔ de.

Aw dɛn go ridyus di sho-through bitwin di kad fes ɛn bak?

Yuz wan opaque wayt gred, inkrisayz di matirial tiknes ɔ ad wan opaque kor layt. Di strɔkchɔ we dɔn dɔn fɔ tɛst wit di aktual artwok bikɔs dak ɛn ay-kɔntrast dizayn dɛn kin inkrisayz sho-thru risk.

Yu tink se kɔstɔm PVC ple kad sheet saiz dɛn de?

Yɛs. Apat frɔm standad saiz dɛn, HSQY kin tɔk bɔt dimɛnshɔn dɛn we mach to di printin prɛs, gripa margin, kad-impɔzishɔn layout ɛn day-kɔt ikwipmɛnt.

Yu tink se PVC kad sheet dɛn we gɛt mat ɔ we gɛt tɛkstɔr de?

Glossy white na di standad surface. Mat ɔ sɛlɛkɛt tɛkstɔr finish dɛn kin tɔk bɔt akɔdin to di kad fil we dɛn nid, printin prɔses, ɔda kwantiti ɛn prodakshɔn fisibiliti.

Yu tink se dɛn kin yuz PVC we dɛn dɔn risaykul fɔ mek dɛn mek kad fɔ ple?

Virgin, patli risaykul ɔ risaykul-kɔntinɛnt opshɔn dɛn kin de. Di fayn fɔmyulashɔn dipen pan waytnɛs, opasiti, sɔfays klin, print kwaliti, mɛkanikal pefɔmɛns ɛn dɛstineshɔn-maket rikwaymɛnt.

Yu tink se PVC we dɛn dɔn risaykul gɛt di sem we aw vajin PVC tan?

Nɔto fɔ se na so i bi. Risaykul kɔntinyu kin inflɔws wayt, kɔlɔ kɔnsistɛns, visible impurities, surface kwaliti ɛn mɛkanikal prɔpati. Dɛn fɔ tɛst di sampul dɛn we di we aw dɛn de luk ɛn di kwaliti we dɛn de print rili impɔtant.

Yu tink se dɛn kin kɔt di sheet dɛn day ɛn rawnd dɛn na kɔna?

Yɛs. Rigid PVC kad sheet kin panch ɔ day-kot insay ple kad ɛn dɔn wit rawnd kɔna. Di bled kondishɔn, kɔt kliarens ɛn matirial tiknɛs afɛkt edj kwaliti.

Wetin mek sɔntɛnde, kad dɛn we dɔn dɔn kin stik togɛda?

Blɔk ɔ stik kin bi bikɔs di ink nɔ kɔrɛkt, varnish we nɔ kɔmpitabl, we dɛn kɔt pasmak, frikshɔn we nɔ fayn na di say we dɛn de, ay tɛmpracha we dɛn de kip ɔ we dɛn pak kad dɛn bifo dɛn dɔn kɔrɛkt dɛn kɔmplit wan.

Wetin mek ink kin kɔmɔt na PVC sheet?

di tin dεm we kin mek i kכmכt na ink sistεm we nכ kכmpatibl, insεf sכfayz εnεji, kכntaminεshכn, we nכ de kכl fayn כ we i bεnd pasmak bifo di ink dכn fulכp. Test ink adheshon bifo bulk prodakshɔn.

A kin aks fɔ sampul bifo a ɔda?

Yɛs. A4 samples kin arenj so di kɔstɔma dɛn kin evalyu tik, kɔlɔ, opasiti, printin, lamination, kɔt ɛn finish-kad fil. Dɛn fɔ kɔnfyus di sampul ɛn freyt kɔndishɔn wit di sɛl tim.

Wetin na di MOQ fɔ PVC ple kad sheet?

Di tipik minim oda kwantiti na 1,000kg. Di fainal MOQ kin difrɛn akɔdin to tik, dimɛnshɔn, matirial fɔmyulashɔn, sɔfayz tritmɛnt ɛn kɔstɔmayshɔn rikwaymɛnt.

Wetin na di prodakshɔn lida tɛm?

Di rɛfrɛns lida tɛm na lɛk 7–15 dez afta dɛn dɔn kɔnfyus di spɛsifikɛshɔn, di tɛm fɔ pe ɛn di ɔda ditil dɛn. Speshal fɔmyulashɔn ɛn big-volyum ɔda kin nid mɔ prodakshɔn tɛm.

Yu tink se PVC ple kad matirial kin risaykul?

PVC kin risaykul tru fayn kɔlɛkshɔn ɛn industrial risaykul sistɛm. Aktual risaykulbiliti dipen pan ink, kɔtin, ɔvlay, kɔntaminɛshɔn ɛn di risaykul infrastukchɔ we de na di dɛstineshɔn makit.

Rikwest wan PVC Plɛy Kad Shit Kɔt

Kontakt HSQY fɔ PVC ple kad shit spɛsifikɛshɔn, A4 sampul, kɔstɔm saiz, ɔlsay prayz, OEM sɔpɔt ɛn intanashɔnal shiping infɔmeshɔn.

If wi gi di tik we dɛn nid, di sheet saiz, di we aw dɛn de print, di kɔnstrɔkshɔn we dɛn dɔn fɔ bil di kad ɛn di kwantiti we dɛn dɔn ɔda, dat go ɛp wi tim fɔ pripia wan mɔ kɔrɛkt rɛkɛmɔndeshɔn ɛn kot.

       Kontakt HSQY fɔ Sampul ɛn Prayz