Farmasitik PVC Blister Film

Famasiutik PVC Blister Film Manufacturer & Supplier

HSQY Plastic de mek ɛn saplae famasitik PVC blista film ɛn laminated mɛrɛsin pak fim fɔ tablɛt, kapsul, pils, sɔpɔsitɔri, nyutrasiutik, vetɛriana prodak ɛn ɔda kwalifay famasi aplikeshɔn dɛn.

Wi famasitik fɔm-film rɛnj inklud rigid PVC film, PVC/PVDC film, PVC/PE film ɛn PVC/PVDC/PE kɔmpɔzit film . Klia, transparent tinted ɛn opaque gred dɛn kin saplae wit kɔstɔmayz tiknɛs, slit wit, rol dayamita, kɔr saiz, wayndin kɔnfigyushɔn ɛn barɛri strɔkchɔ akɔdin to blista-pakej rikwaymɛnt.

Famasiutik blista matirial fɔ pik as pat pan di kɔmplit pak sistɛm. Di mεdisin in mכsishכn, כksijεn εn layt sεnsitiviti, tכgεt shelf layf, distribכshכn klaymat, blista kεviti jכmetri, fכm mashin, aluminiכm lid fכyl εn siling kכndishכn כl infכlכw di fayn mεtirial sεlεkshכn.

If yu de divɛlɔp ɔ riples wan famasitik blista film, sɛn HSQY yu kɔrɛnt spɛsifikɛshɔn, film tiknes, wɛb wit, mashin mɔdel, kaviti dip, barɛri rikwaymɛnt ɛn ɛni ia kɔnsɔmshɔn. Wi tim kin ɛp fɔ no di rayt matirial fɔ sampul ɛn blista-layn ɛvalueshɔn.

Wetin Na Famasiutik PVC Blista Film?

Famasiutik PVC blista film na nכmal wan rigid, nכn-plastik PVC fכm wεb we dεn kin yuz fכ mek kכva insay tεmכfכm mεdisin blista pak dεm. We dɛn de pak di PVC fim, dɛn kin ɔt am, mek am insay kaviti, ful-ɔp am wit tablɛt ɔ kapsul ɛn sial am to wan kɔmpitabl famasitik lidin matirial, we tipikli ɔt-sil-lak aluminiɔm fɔyl.

Plɛn rigid PVC de yuz bɔku bɔku wan bikɔs i de gi gud transparency, establish thermoforming pefɔmɛns, yusful rigiditi ɛn rili ikɔnomik pakej kɔst. כltu, standad PVC nכ de gi di sem mכsichכ εn כksijεn barεri lεk kכt כ laminεt fכmasyutik film dεm.

So, mɛrɛsin dɛn we de sɛnsitiv mɔstɔ, we gɛt ɔksijɛn ɔ we gɛt bɔku haygroskɔpik kin nid PVC/PVDC, PVC/PVDC/PE, PCTFE-based laminate, kol-fɔm aluminiɔm ɔ ɔda strɔkchɔ we gɛt ay barɛri. Faynal selekshɔn fɔ sɔpɔt bay stebiliti stɔdi ɛn pak validɛshɔn.

Farmasi PVC Film Prodakt Rɛnj

HSQY de saplae sɔm famasitik fɔm-film strɔkchɔ fɔ difrɛn doz fɔm, kaviti dizayn ɛn barɛri rikwaymɛnt.

Farmasi PVC Blister Film Spɛsifikeshɔn dɛn

HSQY de saplae sɔm famasitik film famili dɛn wit difrɛn tiknɛs, wɛb-wid ɛn rol kɔnfigyushɔn. Di valyu dɛn we de kam biɛn ya de sɔma di kɔmɔn sapɔt opshɔn dɛn. Faynal spesifikeshɔn dɛn fɔ kɔnfɔm ɔltɛm fɔ di gred we yu dɔn pik.

Famasiutik blista film fɔ bay agens wan spɛsifikɛshɔn we dɛn dɔn gri fɔ. Tiknɛs tolɛreshɔn, slit wit, rol dayamita, kɔr, wayndin dairekshɔn, splays we dɛn alaw, kɔlɔ, kɔtin wet, krayteria fɔ apia ɛn kwaliti dɔkyumɛnt dɛn we dɛn nid fɔ difayn bifo kɔmɛshɔnal prodakshɔn.

PVC vs PVC/PVDC vs PVC/PVDC/PE

Di bɛst famasitik blista film nɔto di matirial we gɛt di ays barɛri. Di kɔrɛkt strɔkchɔ de gi inof protɛkshɔn fɔ mit di prɔdak in validet shelf-layf rikwaymɛnt we i de mentɛn fayn fɔm pefɔmɛns ɛn totɛl pak kɔst.

Aw Famasiutik Blista Pakɛj De Wok

1. Film Unwinding: Di famasi fכm wεb de unwound כnda kכntrol tεnshכn.

2. Hɛt: Di fim de pas tru wan kɔntrol ɔt sɛkshɔn te i rich di fɔm kɔndishɔn we dɛn nid.

3. Tεmכfכm: Vεkyum, prεshכn, pכlכg εp כ wan kכmbaynshכn de mek di blista kכva dεm.

4. Prodakt Fil: Dɛn kin lod tablɛt, kapsul ɔ ɔda we dɛn we dɛn dɔn gri fɔ gi di doz insay di kaviti dɛn we dɔn fɔm.

5. Lidin Aplikeshɔn: Dɛn kin put kɔmpatibl famasitik lidding fɔyl oba di blista wɛb.

6. Hεt Siling: Tεmprachכ, prεshכn εn di tεm we i de de de aktibכt di liding fכyl in hεt-sil lak.

7. Inspekshɔn ɛn Kɔdin: Dɛn de chɛk di prɔdak prɛzɛns, di infɔmeshɔn we dɛn print ɛn di kwaliti fɔ di paket.

8. Panch: Dɛn kin kɔt di kɔntinyu wɛb insay blista kad dɛn we dɔn dɔn.

Di PVC film nɔmɔ nɔ de disayd di fayn fayn paket pefɔmɛns. di blista we dεn kכmplit kכnsis fכ di fכm wεb, kaviti jכmetri, dכz fכm, lid mεtirial, siling sistεm εn sεkכnd pak.

Thermoforming Performance ɛn Mashin Kɔmpatibiliti

Kɔnsistɛns tik, kɔntrol shrinkage, yunifom wayndin ɛn akchual slit na impɔtant tin fɔ famasi pak layn dɛn. di vεryushכn na di film kin mek wεb trak, kεviti fכmeshכn, rεjistεshכn, sial εn panch prכblεm.

We dɛn de aks fɔ sampul matirial, di wan dɛn we de bay fɔ gi di blista-mashin manifakta ɛn mɔdel, fɔm sistɛm, wɛb wit, layn spid, itin kɔnfigyushɔn, kaviti dip, indeks lɔng, fɔm dairekshɔn ɛn maksimal rol dimɛnshɔn.

Wetin Dɛn Fɔ Chɛk We Dɛn De Tray Blister-Line?

• Rol unwinding ɛn wɛb trakin

• Film tɛnsiɔn stebiliti

• Hɛt yunifom akɔdin to di wɛb

• Kaviti difinishɔn ɛn kɔna fɔmɛshɔn

• Wall-thickness distribushɔn afta dɛn dɔn fɔm

• Film shrinkage ɛn rɛjista

• Wait, strɛs mak, bɔbul ɔ pinhol

• Flange flatness bifo yu sial am

• Di kɔnsistɛns we di ɔt-sil gɛt

• Panching akkuracy ɛn finish edj dɛn

Kompatibiliti wit Famasiutik Aluminium Lidding Foil

Rigid PVC blista film na kɔmɔn fɔ sial to famasitik push-thru aluminiɔm fɔyl we dɛn kɔt wit wan kɔmpitabl ɔt-sil lak. Riliable siling dipen pan ɔl tu di matirial ɛn di pak-mashin kɔndishɔn.

Bifo kɔmɛshɔnal aprɔval, di wan dɛn we de bay fɔ evalyu di ɛksaktɔl fɔm fim ɛn aluminiɔm fɔyl kɔmbayn ɔnda di tɛmpracha we dɛn want fɔ sial, prɛshɔn ɛn di tɛm we dɛn de de.

• Sil trɛnk

• Sil yunifom

• Chanɛl lik

• Lak kɔmpitibliti

• Foil delaminɛshɔn fɔ am

• Push-thru pefɔmɛns

• Stɔrej ɛn stebiliti pefɔmɛns

Pikin-resistant, senior-frenli ɛn tamper-evident pefɔmɛns na prɔpati fɔ di kɔmplit tɛst pakej dizayn ɛn dɛn nɔ fɔ atribyut to PVC film nɔmɔ.

Baria Rikwaymɛnt ɛn Famasiutik Shelf Layf

Di pak we dɛn kin pak di mɛrɛsin fɔ protɛkt di mɛrɛsin di tɛm we dɛn dɔn gri fɔ mek i liv. di barεri pכrfomans we dεn nid de dipכnt pan di dכg fכmyuleshכn, tablεt kכt, kapsul shεl, blista kεviti saiz, film strכkchכ, klaymat, sεkכnd pak εn distribyushכn kכndishכn.

Kwɛstyɔn dɛn fɔ Ansa Bifo Yu Pik di Blista Fim

• Yu tink se di prɔdak kin fil fɔ wet?

• Yu tink se di prɔdak kin fil fɔ gɛt ɔksijɛn?

• Yu tink se di prɔdak kin fil fɔ layt?

• Wetin na di prodak shelf layf we dɛn nid?

• Us klaymat zon dɛn go sheb di prɔdak insay?

• Wetin na di kaviti dip ɛn di blista sɔfa eria?

• Yu tink se dɛn go yuz sɛkɔndari barɛri pak?

• Us barɛri data de frɔm di pak we de naw?

di barεri valyu dεm we dεn mכsu pan flat film na yusful fכ mεtirial skrinin, bכt tεmכfכm de strεch εn tin di mεtirial. Fainal pakej protεkshכn fכ so fכ vεrifik yuz di aktual fכm blista kכnfigureshכn.

PVDC Kotin Weyt ɛn Barɛri Sɛlɛkshɔn

PVC/PVDC famasitik film de yuz rigid PVC as di thermoforming sabstret ɛn wan kɔntrol PVDC kɔtin fɔ impɔtant resistans to mɔstɔ, ɔksijɛn ɛn aroma transmishɔn.

Difrɛn PVDC kɔtin wet kin gi difrɛn barɛri lɛvɛl. Kɔmɔn industri kɔnfigyushɔn kin inklud lɛk 40, 60, 90 ɔ 120 g/m2, bɔt di avaylabl ɛn fayn sɛlɛkshɔn fɔ ɔltɛm kɔnfɔm agens di spɛshal HSQY gred.

Nɔto fɔ pik di wet we di kɔtin we ay pas am ɔtomɛtik wan. PVDC lεvεl we yu nid de dipכnt pan drog sεnsitiviti, kaviti jכmetri, fכm dro, klaymat, shelf-layf tכgεt εn aktual stεbiliti data.

Aplikeshɔn dɛn fɔ Famasiutik PVC Film

• Tablɛt Blista Pak: Yunit-dos pak fɔ kwalifay kɔmprɛs tablɛt dɛn.

• Had Kapsul Blista: Transparent ɔ barɛri pak fɔ had-shɛl kapsul.

• Soft Capsule Blisters: Sεlekt film strכkchכ dεm afta kompitibiliti εn stεbiliti evalueshכn.

• Nutraceutical Packaging: Vitamin, it supliment ɛn rilat yunit-dos prodak dɛm.

• Veterinari Prodakt: Kwalifay tablɛt ɛn kapsul fɔ vetɛriana famasi program.

• Klinik Trayal Pak: Dɛn dɔn pik sampul-dos ɛn klinik-stɔdi blista fɔmat dɛn.

• Suppository Packaging: Speshal PVC/PE ɔ multilayer strɔkchɔ dɛn akɔdin to di prɔdak rikwaymɛnt dɛn.

• Selected Healthcare Packaging: Nɔn-stɛriyl wɛlbɔdi biznɛs ɛn diagnostik kɔmpɔnɛnt dɛn afta aplikeshɔn-spɛsifi k kwalifayeshɔn.

Standart famasitik PVC blista film nɔ fɔ ɔtomɛtik diskrayb as steril barɛri matirial. Steril mεdikal-divays pak nid spεsifi k mεtirial, sil-sistεm, stεrilayzεshכn εn maykrobial-baria validεshכn.

Klia, Blu, Amber ɛn Opak Famasiutik PVC Film

HSQY famasitik PVC films kin saplae in difrɛn apinans akɔdin to prodak aydentifikeshɔn ɛn pak-dizayn rikwaymɛnt.

Di kɔlɔ we pɔsin kin si nɔmɔ nɔ de pruv se i gɛt rayt fɔ protɛkt di layt. Layt-sεnsitiv mεdisin dεm nid difayn spεktral-transmishכn rikwaymεnt dεm εn sכpכt stεbiliti evalueshכn.

Kwaliti Kontrol fɔ Famasiutik PVC Blista Film

Famasiutik praymari pak nid fɔ kɔntrol spɛsifikɛshɔn, dɔkyumɛnt prodakshɔn ɛn batch traysabiliti. Testin dipen pan di matirial strɔkchɔ ɛn gri fɔ di kɔstɔma spɛsifikɛshɔn.

Famasiutik Rigyuletɔri ɛn Kwaliti Dokumɛnt

No wan sɛtifiket nɔ de we de mek wan PVC blista fim fayn fɔ ɛvri mɛrɛsin ɛn ɛvri makit ɔtomɛtik wan. Di dɔkyumentri we dɛn nid dipen pan di dɛstineshɔn jɔrisdikshɔn, doz fɔm, drɔg dosya ɛn pak-matirial spɛsifikɛshɔn.

Dipen pan di HSQY gred we yu dɔn pik ɛn di tin dɛn we di kɔstɔma nid, di dɔkyumentri kin inklud:

• Sɛtifiket fɔ Analysis fɔ prodakshɔn batch dɛn

• Teknik Data Sheet we dɛn de yuz

• Infɔmeshɔn bɔt di kɔmpozishɔn fɔ di matirial

• Diklɛreshɔn fɔ kɔnfɔmiti usay i apɔynt

• Infɔmeshɔn fɔ tɛst we dɛn kin yuz fɔ mek famakopi

• Maygrɛshɔn, ɛkstraktabl ɔ kemikal-sefty infɔmeshɔn usay i apɔynt

• WVTR, OTR ɔ kɔtin-weyt data fɔ barɛri strɔkchɔ dɛn

• Manufakchurin-sayt ɛn kwaliti-mɛnejmɛnt infɔmeshɔn

• Batch traceability infɔmeshɔn

• Chenj-kɔntrol sɔpɔt we de ɔnda kɔmɛshɔnal agrimɛnt

• Rigyuletɔri sɔpɔt dɔkyumɛnt dɛn we de ɔnda di prɔdak gred ɛn di tin dɛn we di makit nid

Di wan dɛn we de bay fɔ no di destineshɔn makit ɛn di dosya sɔpɔt we dɛn nid bifo dɛn mek ɔda. Jɛnɛral ripɔt dɛn lɛk ISO, REACH, RoHS ɔ SGS dɔkyumɛnt dɛn nɔ de bay dɛnsɛf fɔ tek ples fɔ famasi kɔmpitibliti, stebiliti ɛn praymari-pakɛj kwalifayeshɔn.

Kɔmɔn Famasiutik Blista Film Prɔblɛm dɛn

Famasiutik PVC Film Rol Rikwaymɛnt dɛn

Otomatik blista layn dɛn nid mɔ pas di kɔrɛkt tik. Rol jɔyometri ɛn wayndin kwaliti de afɛkt di prodakshɔn efyushɔn dairekt wan.

• Eksakt slit wit ɛn wit tolɛreshɔn

• Kor insay dayamita

• Kɔr matirial

• Maksimal rol ausayd dayamita

• Maksimal wet we di rol gɛt

• Winding dairekshɔn

• Koted-sayd oriɛnteshɔn fɔ multilayer film dɛn

• Rol hadnes ɛn winding tɛnsiɔn

• Maksimal akseptabl nɔmba fɔ splays

• Rol ɛn batch-lɛbul rikwaymɛnt dɛn

Storage ɛn Handling fɔ Famasiutik PVC Rol dɛn

• Kip di rol dɛn na dɛn ɔrijinal protɛktiv pak te dɛn nid fɔ mek dɛn prodyuz.

• Stɔr am na say we klin, dray ɛn we dɛn kin kɔntrol we dɛn de kip tin dɛn.

• Protɛkt fim frɔm dairekt san layt, mɔstɔ, dɔst ɛn strɔng smel.

• Nɔ tɔch kemikal dɛn we de rɔtin ɔ say dɛn we gɛt dɔti.

• Sɔpɔt rol dɛn akɔdin to dɛn pak dizayn fɔ avɔyd di ed damej.

• Nɔ drɛg rol dɛn akɔdin to di flɔ ɔ ol di fim wit ɛj dɛn we nɔ gɛt sɔpɔt.

• Fɔ fala di rɛkɛmɔndeshɔn dɛn we dɛn gri pan fɔ stɔrɔj-layf ɛn kɔndishɔn fɔ di gred we yu dɔn pik.

Pakɛj ɛn Ɛkspɔt Sapɔt

Famasiutik PVC film na nɔmal fɔ saplae insay rol dɛn we dɛn tek tɛm wund wit protɛktiv pak we fayn fɔ industrial handling ɛn intanashɔnal shipmɛnt.

• Protektiv PE film wrapping

• Kraft-pepa protɛkshɔn

• Protekshɔn we de na di rol-ɛnd

• Batch ɛn rol aydentifikeshɔn

• Ekspɔt palet pak

• Weyt we dɛn mek fɔ rol we dɛn kɔstɔmayz

• Dimɛnshɔn dɛn we dɛn mek fɔ di palet

• Planin fɔ lod kɔntena

Wetin Mek Yu Pik HSQY as Yu Famasiutik PVC Film Splaya?

• Bɔku Famasiutik Strukchɔ dɛn: Rigid PVC, PVC/PVDC, PVC/PE ɛn PVC/PVDC/PE opshɔn dɛn.

• Kastom Film Tiknes: Famasiutik fom-film spesifikeshɔn dɛn kin mach to pak rikwaymɛnt.

• Kastom Slitin: Dɛn kin mek di rɔl wit mach to di tin dɛn we di blista-mashin wɛb nid.

• Kastom Rol Kɔnfigyushɔn: Dɛn kin tɔk bɔt di kɔr, rol dayamita, di wet we di rol wet ɛn di dairekshɔn we de waynd.

• Barɛri Opshɔn dɛn: Standart PVC ɛn PVDC-kɔt ay-baria sɔlvishɔn dɛn de.

• Divεlכpmεnt fכ Kכla: Klir, tint εn opak fכm-fim opshכn dεm.

• Sampul ɛn Trayal-Rol Sɔpɔt: Dɛn kin ebul fɔ evalyu di matirial na di kɔstɔma in blista layn bifo dɛn gi am kɔmɛshɔnal aprɔval.

• Kwaliti Dokumɛnt: Dɛn kin gi di prɔdak ɛn batch dɔkyumɛnt dɛn akɔdin to di gred ɛn agrimɛnt we dɛn dɔn kɔnfyus.

• B2B Ɛkspɔt Saplai: Bɔlk rol ɛn palet saplai fɔ famasitik pak kɔstɔma dɛn ɔlsay na di wɔl.

Us Infɔmeshɔn Fɔ De Insay Yu RFQ?

Wan ditayl RFQ de alaw HSQY fɔ rɛkɔmɛnd ɛn kot famasitik blista matirial mɔ kɔrɛkt wan.

1. Fɔm fɔ di doz: tablɛt, kapsul, sɔpɔsitɔri ɔ ɔda prɔdak

2. Drug sensitivity to mɔstɔ, ɔksijɛn ɛn layt

3. Di pakej-film strɔkchɔ we de naw

4. PVC tik we dɛn kin tik

5. PVDC kotin weit usay i apɔynt

6. Film wit ɛn tolɛreshɔn

7. Kor insay dayamita

8. Maksimal rol dayamita ɛn rol wet

9. Blister-mashin manifakta ɛn mɔdel

10. Fɔm sistɛm ɛn layn spid

11. Cavity dimɛnshɔn ɛn drɔ dip

12. Blista-kad layout

13. Lidding foil ɛn ɔt-sil lak spesifikeshɔn

14. Rikwayd barɛri ɔ stebiliti target

15. Kɔlɔ ɛn opasiti we dɛn nid

16. Destineshɔn rigyuletɔri makɛt

17. Teknik ɛn rigyuletɔri dɔkyumentri we dɛn nid

18. Trial kwantiti

19. Kɔmɛshɔnal ɔda kwantiti ɛn ɛni ia dimand

20. Di tin dɛn we dɛn nid fɔ pak ɛn sɛn di tin dɛn

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt Famasiutik PVC Film

Wetin na famasitik PVC blista film?

Famasiutik PVC blista film na rigid fɔm wɛb we dɛn kin yuz fɔ thermoform cavities fɔ tablɛt, kapsul ɛn ɔda kwalifay yunit-dos famasitik prodak dɛm. di film we fכm na nכmal wan dεn kin sial am to wan kompitibl fכmasyutik lid mεtirial.

Us tik PVC dɛn kin yuz fɔ pak famasitik blista?

aprכksimatli 0.20–0.30 mm na kכmכn fכ plεnti rigid PVC fכmasyutik blista aplikεshכn dεm. HSQY in famasitik film rεnj de εkstend aprכksimatli frכm 0.13 mm to 0.50 mm dipכnt pan di strכkchכ we dεn sεlekt.

Yu tink se dɛn kin yuz 250 maykron PVC fɔ mek famasitik blista pak?

Yɛs. aprכksimatli 250 maykron na kכmכn rεfrεns tik fכ rigid fכmasyutik PVC, bכt di kכrekt gej fכ sεlekt akɔdin to di kaviti jכmetri, blista tul, dכz fכm εn validet mashin kכndishכn.

Wetin na di difrɛns bitwin PVC ɛn PVC/PVDC?

Plɛn rigid PVC de gi gud thermoforming ɛn klia bɔt rili besik mɔstɔ ɛn ɔksijɛn barɛri. PVC/PVDC ad wan PVDC kotin we de impruv envayrɔmɛnt barɛri we i de mentɛn di PVC fɔm sabstret.

Wetin na PVC/PVDC/PE famasitik film?

PVC/PVDC/PE na wan multilayer famasitik fכm-film strכkchכ we de kכmbayn wan PVC bays wit barεri εn fכnshכnal layεr dεm. I kin yuz fɔ sɛlɛkɛt prɔdak dɛn we nid fɔ ɛnhans barɛri ɔ spɛshal fɔm pefɔmɛns.

Yu tink se plain PVC na ay-baria famasi matirial?

Nɔ. Plɛn rigid PVC de gi bɛsik envayrɔmɛnt protɛkshɔn bɔt nɔ fɔ nɔmal fɔ klas am as ay mɔstɔ- ɔ ɔksijɛn-baria matirial. Sεnsitiv prodakt kin nid PVDC-coated, PCTFE-based ɔ aluminium-based strɔkchɔ.

Aw a go pik di kɔrɛkt PVDC kɔtin wet?

PVDC kotin fɔ pik akɔdin to di drɔg sɛnsitiviti, shelf layf, klaymat zon, blista jɔyometri, fɔm drɔ ɛn target mɔstɔ ɔ ɔksijɛn barɛri. Stebiliti tɛst fɔ kɔnfɔm di fayn strɔkchɔ.

Yu tink se dɛn kin sial famasitik PVC fim to aluminiɔm fɔyl?

Yɛs. Rigid PVC blista film na kɔmɔn fɔ ɔt sial to famasitik aluminiɔm liding fɔyl we gɛt wan kɔmpitabl ɔt-sil lak. Di ekzak foyl, lak ɛn siling kɔndishɔn dɛn fɔ validet togɛda.

Us kɔlɔ dɛn fɔ famasitik PVC fim de?

Di tin dɛn we yu kin pik kin gɛt klia, transparent blu, wayt, amber, rɛd, grɛn, yɔlɔ ɛn kɔstɔmayt kɔlɔ dɛn. Di kɔlɔn ɛn opasiti fɔ fit fɔ di aplikeshɔn fɔ pak di mɛrɛsin we dɛn dɔn pik.

Yu tink se amber ɔ PVC we gɛt kɔlɔ de protɛkt mɛrɛsin dɛn we de mek layt?

Di tin dɛn we gɛt kɔlɔ ɔ we nɔ de shayn kin mek layt nɔ pas, bɔt di kɔlɔ we pɔsin kin si nɔmɔ nɔ kin pruv se i go protɛkt di layt inof. Rikwayd spɛktral pefɔmɛns fɔ difayn ɛn verify tru aprɔpriet tɛst ɛn stebiliti stɔdi.

Yu tink se famasitik PVC fim nɔ de mek pikin dɛn?

PVC fכm film nכmכ nכ de fכm pikin. di pikin rεsistεns dipכnt pan di komplit blista pakej disayn, lid strכkchכ, opin mεkanism εn aplikεbl finish-pakεj tεst.

Yu tink se famasitik PVC blista film steril?

Standart famasitik blista film nɔ de ɔtomɛtik saplae as steril. Stɛriyl pak aplikeshɔn dɛn nid fɔ gɛt matirial ɛn pak prɔses we dɛn spɛshal we dɛn disayn ɛn validet fɔ di sterilayzeshɔn ɛn steril-baria rikwaymɛnt dɛn we dɛn want.

Wetin kin mek di blista cavity fɔmɛshɔn fayn?

Di tin dɛn we kin mek i apin na we i nɔ gɛt bɛtɛ ɔt, di tɛmpracha nɔ ivin, di vaykum ɔ kɔmprɛsd ɛya we nɔ fayn, dip pasmak na di kaviti, di mold vent dɛn we blɔk, di tik we di fim nɔ fayn, di wɛb tɛnsiɔn we nɔ stebul ɔ di fɔm-film gred we nɔ kɔrɛkt.

Aw dɛn kin tɛst famasi PVC fim?

Dipen pan di spɛsifikɛshɔn, tɛst dɛn kin inklud matirial aydentiti, tiknes, wit, vijual kwaliti, kɔlɔ, haz, tɛmal shrinkage, fɔm pefɔmɛns, mɛkanikal prɔpati, barɛri transmishɔn, PVDC kɔtin wet, sil kɔmpatibiliti, maykreshɔn ɛn ɔda kemikal-sefty rikwaymɛnt dɛn.

ISO 9001 pruv se PVC film fayn fɔ pak mɛrɛsin?

Nɔ ISO 9001 gɛt fɔ du wit kwaliti-mɛnejmɛnt sistɛm dɛn. Famasiutik praymari-pakej suitabiliti nid bak fɔ kɔntrol matirial spɛsifikɛshɔn, sefty ɛn kɔmpatibiliti infɔmeshɔn, pefɔmɛns tɛst, stebiliti asɛsmɛnt ɛn dɛstineshɔn-maket dɔkyumentri.

Yu tink se dɛn kin mek di fim we dɛn kin yuz fɔ mek di blista dɛn we dɛn kin yuz fɔ mek mɛrɛsin?

Yɛs. HSQY kin tɔk bɔt kɔstɔmayz film strɔkchɔ, tiknes, PVDC kɔtin, slit wit, rol dayamita, kɔr, wayndin dairekshɔn, kɔlɔ ɛn pak akɔdin to tɛnki rikwaymɛnt ɛn ɔda kwantiti.

Wetin na di MOQ fɔ famasi PVC film?

Bɔku HSQY famasitik film spɛsifikɛshɔn dɛn gɛt wan tipik MOQ we na lɛk 1000–2000 kg. Kastom tiknes, spɛshal kɔlɔ, PVDC kɔtin wet ɛn dɔkyumentri rikwaymɛnt kin rilizɔt difrɛn MOQ.

A kin aks fɔ trial rol bifo a gɛt bɔku ɔda?

Dɛn kin tɔk bɔt di tin dɛn we dɛn kin yuz fɔ tray fɔ mek di prɔjek dɛn we fit. Di wan dɛn we de bay famasi fɔ evalyu nyu fim na di aktual blista mashin fɔ fɔm, trak, sial, panch ɛn finish-pakɛj pefɔmɛns bifo kɔmɛshɔnal aprɔval.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ mek pɔsin gɛt kot fɔ mek pɔsin gɛt PVC fim?

Gi di film strɔkchɔ, tiknes, wit, kɔr, rol dayamita, PVDC kɔtin wet if i apɔynt, kɔlɔ, blista-mashin mɔdel, kaviti dip, lidding fɔyl, rigyuletɔri makit, rikwayd dɔkyumentri, trayal kwantiti ɛn ɛstimat ɛni ia dimand.

Rikwest Famasiutik PVC Blista Film Sampl ɛn Prayz

HSQY de saplae rigid PVC ɛn ay-baria famasitik fɔm film to famasi pak manifakta, kɔntrakt pak, drɔg manifakta, distribyushɔn ɛn industrial kɔnvɔta ɔlsay na di wɔl.

If yu de yuz 250 maykron rigid PVC, PVC/PVDC ɔ wan multilayer famasitik strɔkchɔ naw, HSQY kin rivyu yu tɛknikal spɛsifikɛshɔn ɛn gi fayn matirial opshɔn fɔ tɛst.

Send wi yu kɔrɛnt spɛsifikɛshɔn, blista-mashin infɔmeshɔn ɛn ɛni ia volyum fɔ aks fɔ tɛnki data, trayal matirial, pak infɔmeshɔn ɛn bɔlk prayz.