Mashin fɔ Sial Tray

Wetin Na Mashin fɔ Sial Fɔd Trey?

Wan mashin we dɛn kin yuz fɔ sidɔm wit it trey , we dɛn kin kɔl bak trey sial ɔ mashin fɔ sial tin dɛn fɔ it kɔntena, na tin dɛn we dɛn kin pak we kin ɔt-sial rɔlstɔk lid fim pan it trey dɛn we dɛn dɔn mek bifo tɛm.

Dipen pan di mashin kɔnfigyushɔn, wan trey silɔ kin gi standad atmosfɛrik ɔt silin, gas-flush pak, vaykum-ɛn-gas modifyed atmosfɛs pak, vaykum silin ɔ vaykum skin pak.

HSQY de saplae manual, tabletop, semi-otomatik ɛn kɔntinyu ɔtomɛtik fud trey siling mashin fɔ rɛstɔrant, tek-away biznɛs, supamakit, sɛntral kichin, ketɛning kɔmni, mit prɔsesɔ, sifud pak, rɛdi-mil faktri ɛn industrial fud pak layn.

Di kɔrɛkt mashin fɔ pik akɔdin to di it prodak, trey dimɛnshɔn, trey matirial, lidding-film strɔkchɔ, prodakshɔn autput we dɛn nid, pak prɔses, yutiliti dɛn we de ɛn target shelf layf.

HSQY Food Tray Sial Mashin Range

HSQY de gi ikwipmɛnt fɔ smɔl-batch kɔmɛshɔnal pak, midul-skel it prodakshɔn ɛn kɔntinyu industrial trey siling.

Di autput dɛn we de na di list na rɛfrɛns valyu dɛn frɔm sɔm HSQY mɔdel dɛn we dɛn dɔn pik. Aktual prodakshɔn spid dipen pan trey dimɛnshɔn, nɔmba fɔ mold kaviti, ɔpreshɔn lod spid, vaykum tɛm, gas-flush tɛm, fim fidin, prodak ayt ɛn daunstrim hanlin.

Rifrɛns Mashin Spɛsifikeshɔn dɛn

Dɛn spɛsifikɛshɔn ya na rɛfrɛns valyu fɔ sɔm HSQY mɔdel dɛn we dɛn dɔn pik. Vɔltɛm, plɔg, pawa saplai, trey saiz, mold kaviti ɛn mashin kɔnfigyushɔn fɔ kɔnfɔm bifo yu ɔda.

Manual Fɔd Trey Sial Mashin dɛn

Manual trey sealers yuz an-operated lever or sliding mold fɔ pres di siling tul we dɛn dɔn ɔt agens di lidding film ɛn trey flange.

Dɛn fayn fɔ:

• Restɔrant dɛn we dɛn kin kɛr go

• Deli kɔnta dɛn

• Smɔl smɔl biznɛs dɛn we de mek it

• Di say dɛn we dɛn kin sɛl tin fɔ it

• Meal-prep statap dɛn we dɛn kin du

• Nyu prodak trial dɛn

• Kɔmɛshɔnal kichin dɛn we nɔ gɛt bɔku bɔku volyum

Manual mashin dɛn de gi lɔwa kapital kɔst, kɔmpakt dimɛnshɔn ɛn simpul ɔpreshɔn. Dɛn limiteshɔn dɛn inklud mɔ dipɛnshɔn pan ɔpreshɔn spid, lɔwa prodakshɔn kɔnsistɛns ɛn mɔ manual leba pas ɔtomatik ikwipmɛnt.

Semi-Otomatik Fɔd Trey Silin Mashin dɛn

Sɛmi-ɔtomɛtik trey sila dɛn nɔmal wan nid di ɔpreshɔn fɔ lod ɛn pul trey dɛn we di mashin de ɔtomɛtik fid di fim, kɔntrol di silin saykl ɛn kɔt di fim.

Dɛn de gi prɛktikal intamɛdiet sɔlvishɔn fɔ kɔmni dɛn we nid mɔ kɔnsistɛns autput pas manual sila bɔt nɔ nid yet kɔntinyu in-layn sistɛm.

Di bɛnifit dɛn we dɛn kin gɛt na:

• Otomatik fim indeks

• Klin fim kɔt

• Mɔ stebul sial tɛm

• Ridyus di ɔpreshɔn ɛfɔt

• Kompakt flɔ-spɛs rikwaymɛnt

• Kwik mold chenj fɔ difrɛn trey saiz dɛn

Otomatik Fɔd Trey Silin Mashin dɛn

Otomatik trey silin mashin dɛn kin kɔntinyu fɔ transpɔt trey dɛn tru film fidin, pozishɔn, sial ɛn kɔt steshɔn dɛn.

Dipen pan di prodakshɔn-layn dizayn, dɛn kin intagret wit:

• Otomatik trey denɛsta dɛn

• Ikwipmɛnt fɔ ful-ɔp it

• Di wan dɛn we de wej bɔku ed

• Sos ɔ likwid dosin sistɛm dɛn

• Di wan dɛn we de chɛk wej

• Di tin dɛn we dɛn kin yuz fɔ no bɔt mɛtal

• Di wan dɛn we de kɛr tin dɛn go

• Snap-on lid apliketa dɛn

• Mashin dɛn we dɛn kin yuz fɔ mek lɛbl

• Inkjet ɔ laser kɔda dɛn

• Kes pak ɛn paletayz sistɛm dɛn

Otomatik ikwipmɛnt na di bɛst we fɔ standad trey, ripit prodak lod ɛn kɔntinyu prodakshɔn schedule.

Di Prɔses fɔ Sial di Fɔd Trey

Atmosfɛrik Ɔt Silin

Atmospheric heat sealing de klos di trey we yu nɔ de pul ɔ riples di briz we de insay di paket bay wilful.

Dɛn kin yuz am fɔ tek-away it, deli it, dɛzat, bekeri prodak, fresh prodɔkt ɛn prodak we gɛt shɔt frij ɔ di sem de distribyushɔn.

Gas-Flush Modified Atmosfɛs Pakɛj

Wan gas-flush MAP mashin de introduks fud-grɛd gas insay di trey edspɛs bifo dɛn sial am. di gas de displεs pat pan di nכmal εya bכt i nכ kin mek di sem rεsidyual-כksijεn lεvεl lεk vεkyum-εn-gas prכsεs.

Gas-flush MAP kin fayn fɔ sɔm rɛdi it dɛn we dɛn dɔn pik, bekɛri it, prodɔkt ɛn kol prodak usay dɛn nid fɔ gɛt kɔntrol atmosfɛs.

Vakum-ɛn-Gas MAP Pakɛj

Vaykum-ɛn-gas MAP fɔs de pul bɔku pan di briz na di chɛmba ɛn afta dat i de introduks wan kɔntrol gas miksɔp bifo dɛn sial di tre.

Dis prɔses kin gi mɔ kɔntrol rɛsɛdyual ɔksijɛn pas simpul gas displeysmɛnt, bɔt i nid fɔ gɛt vaykum pɔmp, gas-kɔntrol sistɛm, fayn trey, ay-baria film ɛn validet silin prɔses.

Vaykum Skin Pak we dɛn kin yuz fɔ mek tin dɛn

Vaykum skin pak de yuz wan skin film we dɛn dɔn ɔt we de kɔnfɔm klos rawnd di it ɛn bon to wan kɔmpitabl trey ɔ bak sɔfays.

VSP de ɛp fɔ mek di prɔdak nɔ muv, ridyus fri pakej volyum ɛn mek wan prɛmiɔm tri-dimɛnshɔnal rital prɛzɛntɛnshɔn.

Dɛn kin yuz am fɔ prɛmiɔm mit, fish, sifud, chiz ɛn prɔtin prɔdak dɛm we dɛn dɔn pripia. VSP nid spɛshal film, trey dizayn, ɔt ɛn vaykum kɔntrol.

Vaykum Tray Sial we dɛn kin yuz

Vaykum trey siling de pul di briz bifo yu put di liding film. Nɔto fɔ trit am ɔtomɛtik wan lɛk we dɛn pak am wit vaykum skin.

di fainal pakej apinans, film bihayvya εn fayn fכd prodakt dεm dipכnt pan if di mashin de yuz flat lid film, fleksibul vεkyum film כ tεmכfכm skin film.

Hɛt Sil vs. MAP vs. VSP

Matirial dɛn we dɛn kin yuz fɔ mek it we dɛn kin yuz fɔ it

HSQY trey siling mashin dɛn kin kɔnfigyut fɔ difrɛn trey matirial dɛn, bɔt ɛni trey fɔ mach wit wan kɔmpatib lidding film ɛn siling tul.

HSQY suplai dɛn we gɛt fɔ du wit    PP tray sial film,    PET trey sial film,    PET/PE trey sial film    ɛn    CPET trey sial film.

Aw Mashin fɔ Sial Fɔd Trey De Wok

1. Tray loading: Di ɛmti trey de ful-ɔp wit di it prodak.

2. Flɛnch inspekshɔn: Dɛn kin pul it, ɔyl, sos ɛn mɔstɔ frɔm di silin flɛnch usay i pɔsibul.

3. Tray positioning: Di trey we ful-ɔp de go insay ɔ put am insay di customized mold.

4. Film indexing: Dɛn kin put di rollstock lidding film oba di trey wit di kɔrɛkt siling layt we de fes dɔŋ.

5. Tritmɛnt fɔ di briz: Atmosfɛrik mashin dɛn kin go dairekt fɔ sial, we MAP ɔ vaykum mashin dɛn kin pul di briz ɔ introduks gas akɔdin to di saykl we dɛn dɔn program.

6. Hɛt silin: Di ɔt silin plet de aplay kɔntrol tɛmpracha, prɛshɔn ɛn tɛm fɔ de.

7. Fim kɔt: Di mashin de kɔt di fim rawnd di trey flɛnch ɔ i de riwind di fim wɛb we lɛf.

8. Pakɛj dischaj: Di trey we dɛn sial de kɔmɔt na di mold ɛn muf fɔ inspekshɔn, lɛbl ɔ kes pak.

Aw fɔ Pik di Rayt Trey Sila

Kalkul di Autput we yu nid

Kɔl di nɔmba fɔ di tre dɛn we dɛn nid fɔ wan awa, shift ɛn wok de. Inklud pik dimand, prodak chenj, klin tɛm, brek ɛn fiuja growth.

Kɔnfɛm di Dimɛnshɔn dɛn fɔ di Trey

Gi di trey in ɛksternal lɔng, wit, dip, flɛnch wit, kɔna rayus, kɔmpawtmɛnt layout ɛn maksimal prodak ayt.

Pik di Prɔses fɔ Pak

Disid if di paket nid simpul ɔt silin, gas flush, vaykum-ɛn-gas MAP, vaykum sial ɔ VSP. Dɛn nɔ fɔ pik mashin bifo dɛn dɔn difayn di we aw dɛn fɔ pak am.

Kɔnfɛm di Trey ɛn Film Materials

Gi trey ɛn film sɛmpul dɛn ɛnitɛm we i pɔsibul. Di mashin mold, siling plet, tɛmpracha ɛn kɔt sistɛm fɔ mach di kɔmɛshɔnal pak matirial dɛn.

Chek di Yutiliti dɛn we De

Kɔnfɛm di vɔlɔt we de, frikshɔn, faz, plɔg, kɔmprɛs-ɛya prɛshɔn, ɛya volyum, gas saplai ɛn instɔleshɔn spɛs.

Rivyu di Leba ɛn Ɔtomɛshɔn Rikwaymɛnt dɛn

Manual ikwipmɛnt de ridyus di fɔs invɛstmɛnt bɔt i nid mɔ leba. Otomatik ikwipmɛnt de ridyus trey handling bɔt i nid fɔ gɛt mɔ standad prodakshɔn prɔses ɛn big kapital invɛstmɛnt.

Tink bɔt di Fyuchɔ Trey Fɔmat dɛn

Di wan dɛn we de bay we de plan fɔ mek bɔku prɔdak dɛn fɔ pik wan mashin we gɛt inof film width, mold space ɛn kwik-chenj kapabiliti fɔ di fiuja trey saiz dɛn.

Kastɔm ​​Trey Siling Mold dɛn

Di mold de sɔpɔt di tre we dɛn de sidɔm ɛn i de put di flɛnch ɔnda di silin plet ɛn di naif we dɛn de kɔt.

Di we aw dɛn mek di mold fɔ tink bɔt:

• Trey ekstenal dimɛnshɔn dɛn

• Flange width ɛn kɔna rayus

• Dip we di trey de

• Di we aw dɛn mek di kɔmpawtmɛnt

• Di stiffness we di trey de mek

• Prodakt ayt oba di trey

• Nɔmba fɔ di kaviti dɛn fɔ wan saykl

• Film kot profayl

• Gas-flɔ chanɛl dɛn

• Vaykum chanɛl dɛn

• Tray ejection ɛn rimobul

HSQY kin divɛlɔp kɔstɔm mold dɛn bays pan trey sɛmpul, drɔin ɔ apruv dimɛnshɔn.

Modified Atmosphere Packaging Rikwaymɛnt dɛn we dɛn nid fɔ pak

MAP trey siling mashin na jɔs wan pat pan di kɔmplit modifyed atmosfɛs pak sistɛm.

Wan kɔmɛshɔnal MAP prɔjek kin nid:

• Wan trey we gɛt ay barɛri we nɔ gɛt gas

• Kompatibl ay-baria lidding film

• Fɔd-grɛd ɔksijɛn, kabɔn dayɔgzayd ɔ naytrɔjen saplai

• Gas miksa ɔ gas silinda we dɛn dɔn miks bifo tɛm

• Gas-prɛshɔn rɛgyulatɔ

• Vakum pɔmp usay dɛn nid am

• Rɛsidyual-ɔksijɛn tɛst

• Lik ɛn sil-intɛgriti tɛst

• Validated kol-chen kondishɔn dɛn

• Fɔd-spɛsifi k shelf-layf validɛshɔn

Di kɔstɔma dɛn we de divɛlɔp MAP pak kin rivyu HSQY dɛn    MAP trey dɛn,    ay-baria PP trey    ɛn kɔmpitabl barɛri lid film dɛn.

Vaykum Skin Pakɛj Rikwaymɛnt dɛn

VSP nid mɔ pas fɔ ad vaykum pɔmp to standad trey sila.

Di kɔmplit sistɛm fɔ gɛt:

• Wan mashin we ebul fɔ yuz VSP

• Wan kɔmpatibl vaykum skin fim

• Wan trey ɔ bak bod wit wan kɔmpatib silin sɔfays

• Sufayf dip fɔ mek fim

• Wan fayn vaykum pɔmp

• Kontrol we de mek di fim-ɔt

• Prodakt-ayt kliarens

• Pankchɔ ɛn bon-protɛkshɔn ɛvalueshɔn

Di wan dɛn we de bay kin rivyu HSQY dɛn    VSP trey rεnj    we dεn de divεlכp wan komplit skin-pak sistεm.

Aplikeshɔn fɔ Fɔd Trey Silin Mashin dɛn

Redi Meals ɛn Meal Prep

Di wan dɛn we de sidɔm na tre kin pak pasta, rays it, mit dish, vɛjitebul, sos, kɔri, it-prɛp pat ɛn multicomponent rɛdi it.

Fresh Mit ɛn Pɔltri

Dɛn kin yuz MAP ɛn VSP mashin fɔ bif, bɔd, ship, mins mit, sosish, chukchuk ɛn tik we dɛn mach wit fayn trey, fim ɛn gas sistɛm.

Fish ɛn Sifud

Fish filɛt, shrimps, shelfish ɛn sifud pat dɛn kin yuz ay-baria MAP ɔ VSP pak dipen pan di prɔdak, kol chen ɛn prɛzɛntɛnshɔn rikwaymɛnt.

Frut, Vɛjitebul ɛn Salad

Yu kin yuz standad ɔt silin, breathable film ɔ aplikeshɔn-spɛsifi k MAP fɔ salad, bɛri, kɔt frut, vɛjitebul, mɔs ɛn deli prodɔkt.

Dairy ɛn Chiz

Chiz, bɔta prodakt, dairy dessert ɛn chilled dairy foods kin yuz easy-peel, risilable ɔ high-barrier trey packaging.

Bekeri ɛn Desɛt dɛn

Kek, paste, puding, dɛzat ɛn bekeri prodak kin yuz atmosfɛrik silin, anti-fɔg fim ɔ sɔm gas-flush pak we dɛn dɔn pik.

Aylayn ɛn Instityushɔnal Ketin

Dɛn kin sial CPET ɛn PP it trey fɔ aylayn ketɛning, ɔspitul, skul, prizin, ritayayeshɔn fasiliti ɛn sɛntral-kichin distribyushɔn.

Hajinik Dizayn ɛn Klin

Dɛn fɔ put di tin dɛn we dɛn kin yuz fɔ sidɔm na di it trey ɛn dɛn fɔ yuz am ɔnda wan program we dɛn dɔn rayt bɔt aw fɔ mek it sef ɛn klin.

Impɔtant tin dɛn we yu fɔ tink bɔt fɔ klin yu bɔdi na:

• Food-zone stenlɛs stiɛl kɔnstrɔkshɔn

• I izi fɔ akses di trey mold

• Fɔ pul di it, sos, ɔyl ɛn fim skrap

• Klin rawnd vaykum ɛn gas chanɛl dɛn

• Protekshɔn fɔ ilɛktrik kɔmpɔnɛnt dɛn frɔm mɔstɔ

• Kεmikכl dεm fכ klin fכ it we sef

• Dokumɛnt fɔ klin di frɛkuɛns

• Inspekshɔn fɔ siling plet ɛn kɔt naif

Di we aw dɛn alaw fɔ klin di mashin dipen pan di ilɛktrik protɛkshɔn we di mashin gɛt ɛn aw dɛn mek am. Nɔ yuz wata we gɛt ay prɛshɔn pas nɔmɔ dɛn mek di mɔdel we yu dɔn pik ɛn dɛn dɔn gri fɔ mek dɛn was-dɔwn klin.

Mentɛnans ɛn Spay Pat dɛn

Prɛventiv mentenɛns de ɛp fɔ ridyus di sil dɛfɛkt, film west ɛn dawt tɛm we dɛn nɔ plan.

Di mentenɛns we dɛn kin du ɔltɛm kin inklud:

• Klin di silin plet ɛn di mold

• We dɛn de inspɛkt di nɛf dɛn we dɛn de kɔt

• Chek di hεtin εlimεnt dεm εn tεmprachכ sεns dεm

• Inspekshɔn fɔ di nyumɛtik hos ɛn fitin dɛn

• Chek di vaykum-pamp ɔyl ɛn filta dɛn

• Inspekshɔn gas layn ɛn rigyulatɔ dɛn

• Chek film-fid rɔla ɛn sɛns

• Lubricating apruv mɛkanikal kɔmpɔnɛnt dɛn

• Fɔ chɛk di imejensi stɔp ɛn di sefty switch dɛn

• Rikɔdin mentenɛns ɛn riplesmɛnt intaval

Di wan dɛn we de bay fɔ tɔk bɔt spay ɔt ɛlimɛnt, tɛmpracha kɔntrol, kɔt naif, sil, sɛns, nyumɛtik pat ɛn vaykum-pɔmp kɔnsumabl we dɛn de ɔda mashin.

Instɔlɛshɔn, Kɔmishɔn ɛn Trenin

Bifo dɛn ship di mashin, HSQY kin rivyu di kɔstɔma in tre, fim, pawa saplai, plɔg, kɔmprɛsd ɛya, gas saplai ɛn prodakshɔn autput we dɛn nid.

Kɔmishɔn kin inklud:

• Machine-leveling ɛn yutiliti kɔnɛkshɔn

• Instɔlɛshɔn fɔ mold

• Fɔ lod di fim ɛn fɔ trak am

• Tεmpratura, prεshכn εn dεl-taym ajɔstmεnt

• Vaykum ɛn gas paramita sɛtup

• Trial siling wit kɔmɛshɔnal matirial dɛn

• Ɔpreshɔn trenin

• Trenin fɔ klin ɛn mentenɛns

• Spare-parts rivyu fɔ di tin dɛn we dɛn de du

Wetin Mek Yu Pik HSQY as Yu Food Tray Sealing Machine Supplier?

• Bɔku ikwipmɛnt lɛvɛl dɛn: Manual, tebultɔp, sɛmi-ɔtomɛtik ɛn kɔntinyu ɔtomɛtik mashin dɛn de.

• Bɔku bɔku pak prɔses: Dɛn kin tɔk bɔt standad ɔt silin, gas flush, vaykum-ɛn-gas MAP ɛn VSP sɔlvishɔn.

• Kastom trey mold: Dɛn kin divɛlɔp mold akɔdin to trey dimɛnshɔn, shep ɛn kaviti rikwaymɛnt.

• Trey-ɛn-film maching: HSQY de saplae PP, PET, PET/PE, CPET, MAP ɛn VSP trey wit kɔmpitabl lid film dɛn.

• Fleksibul autput rɛnj: Ikwipmɛnt de kɔba smɔl kɔmɛshɔnal batch dɛn tru kɔntinyu prodakshɔn we pas 1,000 tre fɔ wan awa.

• Vɔltɛm kɔstɔmayshɔn: Dɛn kin rivyu vɔltɛm, frikshɔn ɛn plɔg kɔnfigyushɔn fɔ difrɛn kɔntri dɛn we dɛn de go.

• Teknikal trayal sɔpɔt: Dɛn kin rivyu kɔmɛshɔnal trey ɛn fim dɛn bifo di las mashin kɔnfigyushɔn.

• Kɔmplit pak sistɛm: Yu kin gɛt tre, fim, mold ɛn ikwipmɛnt frɔm wan spɔlayt.

• Ekspɔt pak: Dɛn kin pak mashin dɛn fɔ intanashɔnal si ɔ ɛya shipmɛnt.

• Teknikal dɔkyumentri: Dɛn kin gi infɔmeshɔn bɔt aw fɔ wok, aw fɔ mentenɛns ɛn aw fɔ sɛt di mashin akɔdin to di mɔdel we dɛn dɔn pik.

Infɔmeshɔn we dɛn nid fɔ mek wan Tray Sealing Machine Quote

Fɔ gɛt kɔrɛkt mashin rɛkɛmɔndeshɔn ɛn kot, duya gi bɔku pan dɛn infɔmeshɔn ya as yu ebul:

• Fɔd prodakt

• Fɔd filin tɛmpracha

• Matirial fɔ trey

• Fizik trey sampul dɛn

• Trey eksternal lɔng, wit ɛn dip

• Tray flange width ɛn kɔna rayus

• Nɔmba fɔ di trey kɔmpawtmɛnt dɛn

• Maksimal it ayt oba di trey

• Lidding-film strɔkchɔ

• Film wit, tik ɛn rol dayamita

• Rikwayd autput fɔ wan awa

• Di awa dɛn we dɛn kin wok fɔ ɛni shift

• Manual, semi-ɔtomɛtik ɔ ɔtomɛtik rikwaymɛnt

• Atmosfɛrik, MAP, vaykum ɔ VSP prɔses

• MAP gas miksɔp

• Target di ɔksijɛn we lɛf

• Target shelf layf

• Vɔltɛm, frikshɔn ɛn faz we de

• Di kayn plɔg we dɛn nid

• Avaylabl kɔmprɛs-ɛya prɛshɔn ɛn kapasiti

• Gas saplai we de fɔ it-grɛd we de

• Instɔlɛshɔn spɛs we de

• Rikwayd ɔpstrim ɛn dɔŋstrim intagreshɔn

• Langwej we dɛn nid fɔ kɔntrol ɛn manyual dɛn

• Spare-parts pakej we dɛn nid

• Di kɔntri we yu want fɔ go, si pɔt ɔ adrɛs we dɛn de sɛn

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt di mashin dɛn we dɛn kin yuz fɔ silin di it trey

Wetin mashin we dɛn kin yuz fɔ sidɔm na it trey kin du?

I de put ɔt ɛn prɛshɔn fɔ bon di liding film to wan trey we dɛn dɔn mek bifo tɛm. Dipen pan di mɔdel, i kin pul di briz bak, flush gas ɔ prodyuz vaykum skin pak.

Wetin na di difrɛns bitwin trey silɔ ɛn vaykum pak mashin?

Wan standad trey sila de klos wan rigid trey wit top film. Vaykum pak mashin de pul di briz na bag ɔ paket. Sɔm trey sila dɛn gɛt vaykum, MAP ɔ VSP fɛnshɔn dɛn, bɔt dɛn wan ya nid spɛshal mashin kɔnfigyushɔn dɛn.

Wetin na di difrɛns bitwin gas flush ɛn vaykum-gas MAP?

Gas flush de displace di briz bay we i de introduks gas insay di trey. Vaykum-gas MAP fכs de pul mכst pan di briz εn afta dat i de introdכks di gas miksכp, nכmal wan i de alaw mכr kכntroled rεsidyual כksijεn.

Wetin na di difrɛns bitwin MAP ɛn VSP?

MAP de mentɛn wan kɔntrol gas edspɛs ɔp di it. VSP de pul di briz ɛn fɔm di fim klos rawnd di prɔdak, we de ridyus fri edspɛs ɛn mek di it nɔ muv.

Wan mashin kin gi ɔt silin, MAP ɛn VSP?

Sɔm advans mashin dɛn kin sɔpɔt bɔku prɔses dɛn tru difrɛn tul sɛt ɛn kɔnfigyushɔn dɛn. Standart manual ɔ besik ɔtomɛtik mashin dɛn nɔ fɔ tek am se dɛn de sɔpɔt ɔl di prɔses dɛn.

Us trey matirial dɛn we HSQY mashin dɛn kin sial?

Dɛn kin kɔnfigyut di mashin dɛn we dɛn dɔn pik fɔ PP, APET, PET/PE, CPET, ay-baria plastic, aluminiɔm ɛn fayba trey dɛn we dɛn kɔt. Kompatibiliti dipen pan di mold, film ɛn siling kɔndishɔn.

Wan liding film kin sial ɛvri trey matirial?

Nɔ, di fim in ɔt-sil layt fɔ mach di tin ɔ di kɔtin we de na di trey flɛnch. PP, PET, PE-coated PET, CPET ɛn aluminiɔm trey dɛn kin nid difrɛn film dɛn.

Ɔmɔs tre dɛn wan manual mashin kin sial fɔ wan awa?

Di HSQY manual mashin dɛn we dɛn dɔn pik de list lɛk 480 trey dɛn fɔ wan awa wit wan-kaviti mold ɛn te to lɛk 800 trey dɛn fɔ wan awa wit sɔm tu-kaviti kɔnfigyushɔn dɛn we dɛn dɔn pik. Aktual autput dipen pan di ɔpreshɔn ɛn tre-lod prɔses.

Ɔmɔs tre dɛn ɔtomɛtik mashin kin sial fɔ wan awa?

HSQY ɔtomɛtik mashin dɛn we dɛn dɔn pik de gi rɛfrɛns autput frɔm lɛk 1,300 to 2,000 trey dɛn fɔ wan awa. Aktual autput dipen pan mold cavities, trey saiz ɛn pak prɔses.

Yu tink se MAP silin de ridyus di mashin autput?

I kin ebul. Vaykum ɛn gas-flush stej dɛn de ad tɛm to ɛni saykl, so di MAP autput kin smɔl pas di atmosfɛrik ɔt-silin autput na di sem mashin.

Yu tink se mashin we dɛn kin yuz fɔ sidɔm na trey kin mek di it lɔng?

Di mashin kin ɛp fɔ mek wan pakej we dɛn kin kɔntrol ɛn we nɔ kin lik, bɔt di shelf layf kin dipen bak pan it kwaliti, hajɛns, trey barɛri, film barɛri, gas miksɔp, sil intɛgriti ɛn stɔrɔj ​​tɛmpracha.

Di mashin kin sial trey dɛn we gɛt sos ɔ wata?

Yɛs, bɔt di trey flɛnch fɔ kɔntinyu fɔ klin ɛn dray usay i pɔsibul. Sos, ɔyl ɛn it patikyula dɛn kin mek lik chanɛl dɛn. Dɛn kin nid bak fɔ mek wan kɔmpatib kɔntaminɛshɔn-silin fim.

Yu tink se di mashin kin sial trey dɛn we yu kin yuz maykrowev?

Yes, if di PP ɔ CPET trey ɛn lidding film fit fɔ di maykrowev saykl we dɛn want. Mashin sial nɔ de mek di paket sef fɔ maykrowev.

Di mashin kin sial CPET ɔ aluminiɔm trey dɛn we yu kin ɔvin?

Mashin dɛn we dɛn dɔn pik kin sial CPET ɛn aluminiɔm trey wit wan kɔmpatib mold ɛn ovenable lidding film. Di kɔmplit paket fɔ validet fɔ di tɛmpracha ɛn di tɛm we dɛn want fɔ mek di ɔvin.

Yu tink se dɛn nid fɔ gɛt kɔmprɛs ɛya?

Besik manual mashin dɛn nɔ kin nid kɔmprɛsd ɛya. Bɔku sɛmi-ɔtomɛtik, MAP ɛn ɔtomɛtik mɔdel dɛn nid fɔ gɛt ɛksternal ɛya saplai, we kin kɔmɔn arawnd 0.6–0.8 MPa fɔ sɔm HSQY ikwipmɛnt dɛn we dɛn dɔn pik.

Yu tink se vaykum pɔmp de insay?

Vaykum pɔmp dɛn de insay ɔ spɛsifa ɔl fɔ sɔm vaykum, vaykum-gas ɔ VSP kɔnfigyushɔn dɛn we dɛn dɔn pik. Gas-flush-onli ɛn besik ɔt-siling mashin dɛn nɔ kin gɛt vaykum pɔmp.

Yu tink se yu kin kɔstɔmayt di vɔlɔt ɛn di plɔg?

Vɔltɛm, frikshɔn ɛn plɔg opshɔn dɛn kin rivyu akɔdin to di kɔntri we yu de go. Di ilɛktrik saplai we dɛn nid fɔ kɔnfɔm bifo dɛn mek am.

Wan mashin kin sial difrɛn sayz dɛn na trey?

Yes, we dɛn gɛt mold dɛn we dɛn kin chenj ɛn ɔl di trey saiz dɛn de insay di mashin in maksimal film wit, mold eria ɛn tre-dip limit.

Aw lɔng i kin tek fɔ chenj di mol?

Di tɛm we dɛn kin chenj di mold kin dipen pan di we aw dɛn mek di mashin ɛn di tul dɛn. Slaydin ɛn tul-fri dizayn kin ridyus chenj-ɔva tɛm, bɔt di ɛksaktɔl prosidur fɔ kɔnfɔm fɔ di mɔdel we yu dɔn pik.

Wetin mek di fim nɔ de sidɔm na di tre?

Di tin dɛn we kin mek i apin na wan film we nɔ kɔmpitabl, rivays silin sayd, inɔf tɛmpracha, shɔt tɛm fɔ de, nɔ fayn prɛshɔn, kɔntaminɛt flɛnch ɔ nɔ ivin silin plet.

Wetin mek di paket kin lik afta dɛn dɔn sial am?

Lik kin kɔmɔt frɔm it na di flɛnch, film wrinkles, pankchɔ, trey krak, chanɛl lik, kɔrɛkt sɛtin ɔ wan damej fɔ kɔt ɛn sial tul.

Us mentenɛns fɔ tray fɔ sidɔm?

Di mentenɛns ɔltɛm inklud fɔ klin di mold ɛn sial plet, inspɛkt di naif dɛn we dɛn de kɔt, chɛk di tin dɛn we de ɔt, mentenɛns di pat dɛn we gɛt nyumɛtik ɛn fɔ sav di vaykum pɔmp usay dɛn fit am.

HSQY kin gi trey ɛn lidding film wit di mashin?

Yɛs. HSQY de saplae PP, PET, PET/PE, CPET, MAP, VSP ɛn ay-baria trey togɛda wit kɔmpitabl silin film ɛn kɔstɔmayz mashin mold.

A kin sɛn mi trey dɛn fɔ mek dɛn tɛst mi na mashin?

Trey ɛn film samples kin rivyu fɔ mold divɛlɔpmɛnt ɛn siling trayal. Dɛn fɔ gi di it prodak, di autput we dɛn nid ɛn di we aw dɛn de pak am bak.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ gɛt kot?

Gi di it prodak, trey matirial, trey dimɛnshɔn, film strɔkchɔ, autput we dɛn nid, pak prɔses, vɔlɔt, kɔmprɛs-ɛya saplai, gas we dɛn nid ɛn di kɔntri usay dɛn de go.

Rikwest wan Fɔd Trey Silin Mashin Kɔt

Yu de luk fɔ manual trey sila, sɛmi-ɔtomɛtik fud kɔntena siling mashin, MAP trey siling mashin, VSP mashin ɔ kɔntinyu ɔtomɛtik it pak layn?

Kɔntakt HSQY fɔ aks fɔ mashin rɛkɛmɔndeshɔn, tɛknikal spɛsifikɛshɔn, kɔstɔm mold, tre-ɛn-film maching, trayal sɔpɔt, faktri prayz ɛn intanashɔnal shiping infɔmeshɔn.

       Rikwest fɔ gɛt Kot