Anti-Skratch PET Sheet Manufacturer ɛn Supplier
HSQY Plastic de mek ɛn saplae anti-skrat PET sheet ɛn rol fɔ print, fɔl bɔks, transparent pak winda, protɛktiv kɔva, displei, ilɛktronik ɔvlay, fɔnicha protɛkshɔn, industrial panɛl, ɛn tɛmɔfɔm aplikeshɔn.
We yu kɔmpia am wit standad PET shit, anti-skrach PET gɛt spɛshal trit ɔ had-kɔt sɔfays we de ɛp fɔ ridyus visible scuffs, handling mak, ɛn abrasion we i de mentɛn di klia, rigiditi, ɛn prɔses advantej dɛn fɔ PET.
HSQY kin saplae anti-skrach PET insay shit ɔ rol wit kɔstɔmayz tik, wit, lɔng, kɔlɔ, sɔfays finish, kɔtin kɔnfigyushɔn, protɛktiv film, ɛn pak. Di kɔtin spɛsifikɛshɔn fɔ pik akɔdin to di sɔfays hadnɛs we dɛn nid, optik pefɔmɛns, printin we, fɔm prɔses, klin ɛnvayrɔmɛnt, ɛn fayn aplikeshɔn.
| Sɔntin |
Anti-skrat PET shit, rigid PET film, ɛn PET shit rol |
| Tin dɛn |
PET wit wan aplikeshɔn-spɛsifi k skrach-rɛsistant sɔfays tritmɛnt ɔ had kɔtin |
| Tik we i tik |
0.1–3mm, sכbjεkt to prodak strכkchכ εn כda kכnfכmeshכn |
| Fɔmat fɔ di Sapɔt |
Kɔt sheet, standad-sayz sheet, slit rol, ɛn kɔstɔmayt rol |
| Di Opshɔn dɛn fɔ di Surface |
Klia glos, mat, frɔst, tɛkstɔr, ɔ aplikeshɔn-spɛsifi k fɛnshɔnal kɔtin |
| Kɔmɔn Aplikeshɔn dɛn |
Winda dɛn fɔ pak tin dɛn, panɛl dɛn we dɛn print, displei dɛn, ɔvalayz dɛn, kɔva dɛn we de protɛkt dɛn, bɔks dɛn we dɛn kin fold, pak dɛn we dɛn kin pak wit blista, ɛn tin dɛn we dɛn kin yuz fɔ dekɔret |
Wetin Na Anti-Skrat PET Shit?
Anti-skrat PET shit na transparent ɔ kɔlɔ polyethylene terephthalate sheet wit modifyed sɔfays we dɛn mek fɔ gi bɛtɛ rɛsistɛns to skrat, skrach, ɛn abrashɔn pas PET we dɛn nɔ trit.
Standard PET dɔn ɔlrɛdi de gi gud klia, rigiditi, dimɛnshɔnal stebiliti, ɛn impak rɛsistɛns. Bɔt if yu ol am bɔku tɛm, yu put am stɛp am, transpɔt am, klin am, print am, kɔnvɔyt am, ɛn rital displei kin lɛf mak na say we dɛn nɔ trit.
Wan anti-skrat kɔtin de mek wan layt we at fɔ si we de ridyus di damej we pɔsin kin si ɛn ɛp di tin we dɛn dɔn mek fɔ mek i luk klin. Di fainal pefɔmɛns dipen pan di PET sabstret, kɔtin kemistri, kɔtin tiknɛs, kɔring prɔses, rikwayd hadnɛs, ɛn di we aw dɛn yuz fɔ tɛst skrach rɛsistɛns.
Anti-skrach nɔ min se i nɔ go skrach ɔltogɛda. Shap tul dɛn, tin dɛn we de abrayd, prɛshɔn pasmak, tin dɛn we nɔ fayn fɔ klin, ɔ we dɛn nɔ prosɛs di tin fayn, kin stil pwɛl di tin. Di wan dɛn we de bay fɔ difayn di tin dɛn we dɛn nid fɔ du we dɛn kin mɛzhɔ instead fɔ abop pan di wɔd 'anti-skratch.' nɔmɔ.
Aw di Kɔtin we Nɔ Skrach De Wok?
di PET sabstεrayt de trit wit wan transparent fכnshכnal kכt we dεn kכl כ bכnd to di sכfa. Dis layt we de na do we at pasmak de ɛp fɔ ridyus di difɔmeshɔn we di sɔfayz de we di matirial de ɛkspos to frikshɔn, ripit hanlin, slaydin kɔntakt, ɔ layt abrashɔn.
Dipen pan di aplikeshɔn, dɛn kin put di kɔtin na wan say ɔ ɔl tu di say dɛn. Dɛn kin pik wan-sayd kɔtin we na di say nɔmɔ we de na do nid fɔ protɛkt. Dɛn kin yuz dabl-sayd kɔtin we dɛn kin ol ɔl tu di say dɛn, print dɛn, klin dɛn, ɔ put dɛn na do we dɛn de yuz dɛn.
Wan had kotin kin enjin bak fɔ gi ɔda wok dɛn, lɛk anti-glare pefɔmɛns, anti-statik bihayvya, impɔtant kemikal rɛsistɛns, UV rɛsistɛns, anti-finga prɛnt prɔpati, ɔ ɛnhans printabiliti. Dɛn wok ya nɔ kin de ɔtomɛtik wan insay ɛvri anti-skrach PET gred ɛn dɛn fɔ spɛsifa dɛn sɛpret wan.
Ki Benefits fɔ Anti-Skratch PET Shit dɛn
Impruv resistance to scuffs, handling maks, ɛn layt abrasion
Mentɛn wan klin ɛn mɔ prɔfɛshɔnal sɔfays apinans
High transparency fɔ prodak visibiliti ɛn displei aplikeshɔn dɛn
Lɔwa wet ɛn ridyus risk fɔ brok we yu kɔmpia am wit glas
I fayn fɔ print, kɔt day, fɔ fold, panch, ɛn fɔ mek
I de insay sheet ɛn rol fɔmat fɔ difrɛn kɔnvɔyt ikwipmɛnt
Opshɔnal glos, mat, frɔst, anti-glare, ɔ fɛnshɔnal sɔfays
Yu kin gi am wit protɛktiv masking film fɔ prosɛs ɛn transpɔt
Tik, wit, kɔlɔ, hadnɛs, ɛn kɔtin kɔnfigyushɔn we yu kin kɔstɔmayz
Anti-Skratch PET Sheet Spɛsifikeshɔn dɛn
Di tebul we de dɔŋ ya de sho di jenɛral HSQY sapɔt rɛnj. Eksakt avaylabl dipen pan tik, di kayn kɔtin, di surface finish, ɔda kwantiti, di we aw dɛn de prosɛs, ɛn di tolɛreshɔn dɛn we dɛn nid.
| Item |
Avaylabl Spɛsifikeshɔn |
| Base Material |
PET ɔ aplikeshɔn-spɛsifi k PET sabstret |
| Tik we i tik |
0.1–3mm na di wan |
| Standart Shit Sayz dɛn |
700 × 1000mm, 915 × 1830mm, 1000 × 2000mm, 1220 × 2440mm, ɛn kɔstɔm saiz dɛn |
| Rol Width we yu de yuz |
aprכksimatli 80–1300mm, sכbjεkt to tik εn kכt kכnfigureshכn |
| Kɔlɔ dɛn |
Transparent, transparent tinted, kala, ɛn opaque opshɔn dɛn |
| Surface Finish na di wɔl |
Glos, mat, frɔst, tɛkstɔr, ɔ kɔstɔm finish |
| Kɔnfigyushɔn fɔ Kɔtin |
Singl-sayd ɔ dabl-sayd tritmɛnt, we dɛn nid fɔ yuz am |
| Fim we de protɛkt pɔsin |
Wi kin tɔk bɔt wan sayd ɔ tu sayd protɛktiv mask |
| Minimum Ɔda Kwantiti |
Tipikli 1000kg, sɔbjɛkt to prodak ɛn kɔstɔmayshɔn |
| Kastamayzeshɔn |
Tik, waid, lɔng, kɔlɔ, finish, kɔtin had, protɛkt fim, kɔt, slit, ɛn pak |
Luk di komplit HSQY PET shit rεnj , inklud APET, PETG, RPET, GAG, anti-fכg PET, glos PET, mat PET, εn PET tεmכfכm shit.
Impɔtant Pɔfɔmɛnshɔn Paramita dɛn
Di wan dɛn we de bay nɔ fɔ evalyu wan anti-skrat sheet bay di tik ɛn aw i luk nɔmɔ. Di pefɔmɛns we dɛn nid fɔ difayn tru di tɛknikal paramita dɛn we dɛn kin mɛzhɔ ɛn di we dɛn we dɛn gri fɔ du fɔ tɛst.
| Paramita |
Wetin Mek I Impɔtant |
Wetin Baya dɛn fɔ Kɔnfɛm |
| Pensil Hadnɛs |
Indiket di resistans fɔ di kɔt sɔfays to mak ɔnda wan difayn tɛst kɔndishɔn |
Rikwayd hadnɛs gred, aplai lod, tɛst we, kɔtin sayd, ɛn akseptans krayteria |
| Layt Transmishɔn |
Ditarmin ɔmɔs layt we pɔsin kin si de pas tru di sheet |
Minimum transmishɔn we dɛn nid fɔ pak, displei, optik, ɔ protɛktiv aplikeshɔn dɛn |
| Nɔ klia |
Afɛkt transparency, shapness, diffusion, ɛn visual appearance |
Maksimal haz fɔ klia prodak ɔ target haz fɔ mat ɛn anti-glare sɔfays |
| Coating Adhesion fɔ di tin dɛn we de apin |
I de sho if di kɔtin de kɔntinyu fɔ bon we dɛn de kɔt, fold, fɔm, klin, ɛn yuz |
Rikwayd adhesion test, prɔsesin kɔndishɔn, bɛnd rayus, ɛn ɛksplɔshɔn ɛnvayrɔmɛnt |
| Abrashɔn Resistɛns |
Evaluate surface chenj afta ripit rub ɔ abrasive kɔntakt |
Abrasive wil ɔ matirial, lod, saykl kɔnt, haz chenj, ɛn visual akseptɛns limit |
| Kεmikכl Resistεns |
Impɔtant we di say we de ɔp de na di say we dɛn de klin, ɔyl, kɔsmɛtik, kemikal, ɔ disinfɛktan |
Eksakt kemikal, kɔnsɛntreshɔn, kɔntakt tɛm, tɛmpracha, frɛkuɛns fɔ klin, ɛn akseptabl sɔfayz chenj |
| Fɔmabiliti fɔ mek pɔsin |
Ditarmin if di kotin kin tinap fɔ bɛnd ɔ thermoforming we nɔ krak |
Fɔm tɛmpracha, drɔ rɛsɛshɔn, mold dizayn, kɔtin ɔriɛnteshɔn, ɛn rikwayd finish shep |
| Di we aw pɔsin kin print |
Afɛkt ink adheshon, imej kwaliti, curing, ɛn prodakshɔn kɔnsistɛns |
Printin sayd, ink sistem, surface enaji, curing method, ɛn adhesion rikwaymɛnt |
Tayp dɛn fɔ Anti-Skratch PET Sheet dɛn
Klia Glɔs Anti-Skrat PET Sheet
Klia glos PET de gi ay prodak visibiliti ɛn wan smol, riflɛktif apinans. Dɛn kin pik am fɔ transparent bɔks winda, rital pak, displei panɛl, protɛktiv kɔva, ɛn aplikeshɔn usay di tin dɛn we pɔsin kin si klia na di prɔyoritɛt.
Matte anti-skratch PET sheet we yu go yuz
Mat surface dεm de ridyus strכng riflεkshכn dεm εn de gi yu sכft vishכnal apinεns. Dɛn kin yuz dɛn fɔ kɔntrol panɛl, lɛbl, grafik, dɔkyumɛnt kɔva, displei, dɛkɔretiv aplikeshɔn, ɛn prɔdak dɛn we nid fɔ rid fayn fayn wan ɔnda layt we de insay os.
Anti-Glare PET Sheet we yu de yuz
Anti-glare PET de yuz wan kɔntrol sɔfays tɛkstɔr ɔ kɔtin fɔ difyuz riflɛkt layt. I kin mek i izi fɔ rid fɔ displei, ikwipmɛnt panɛl, mɛmbran switch, ilɛktronik intafeys, ɛn protɛktiv skrin ɔvlay.
Anti-glare pefɔmans nɔmal fɔ inkrisayz haz, so bayer dɛn fɔ balans riflɛkshɔn kɔntrol agens imej shapnɛs ɛn transparency.
PET we gɛt wan say we gɛt had-kɔt
Singl-sayd had-coated PET fit wen onli di outward-fesing or user-contact surface nid adishonal protekshon. Di sayd we dɛn nɔ trit kin de fɔ print, lamin, fɔ adhesive, ɔ fɔ bon.
PET we gɛt dabl-sayd we gɛt had-kɔt
Dabl-sayd kɔtin de gi protɛkshɔn pan ɔl tu di say dɛn ɛn dɛn kin tink bɔt am fɔ panɛl dɛn we dɛn kin yuz bak, transparent barɛri, sheet dɛn we dɛn kin handle bɔku tɛm, ɛn aplikeshɔn dɛn we ɔl tu di sayd dɛn kin stil de na do.
Funshɔnal Anti-Skrat PET
Aplikeshɔn-spɛsifi k vɛshɔn dɛn kin jɔyn skrach rɛsistɛns wit anti-statik, UV-rɛsistɛns, anti-finga prɛnt, kemikal-rɛsistɛns, printabl, ɔ tɛkstɔr fɛnshɔn dɛn. Ɛni ɔda fɛnshɔn de afɛkt kɔst, optik pefɔmɛns, prɔsesin bihayvya, ɛn minim ɔda kwantiti.
Aplikeshɔn fɔ Anti-Skrat PET Shit dɛn
Transparent Pakɛj Window
Anti-skratch PET na tin we dɛn kin yuz bɔku bɔku wan as transparent winda fɔ fold katon, tɔys bɔks, kɔsmɛtik pak, gift bɔks, ilɛktronik pak, steshɔnari pak, ɛn ɔda rital prɔdak dɛn.
Di say we dɛn dɔn mek fayn de ɛp di winda fɔ mek i klin we dɛn de kɔt di day, we dɛn de gɛda bɔks, we dɛn de kɛr am go, we dɛn de stak am, ɛn we dɛn de sho di shelf.
Bɔks dɛn we dɛn kin fol ɛn di tin dɛn we dɛn kin print
PET sheet dɛn kin print, day kɔt, kris, fold, ɛn bon fɔ mek dɛn mek transparent ɔ pat pan transparent pak. Di kɔtin fɔ mach wit di ink we yu dɔn pik, adhesive, folding radius, ɛn di kɔnvɔyt prɔses.
Ilɛktronik Displei ɛn Skrin Ɔvlay
Dɛn kin yuz PET we gɛt had kɔt as prɔtɛktiv ɔvlay fɔ displei, inschrumɛnt panɛl, tɔch intafɛs, kɔntrol ikwipmɛnt, os aplayans, ɛn ilɛktronik prɔdak dɛn.
Displei aplikeshɔn kin nid tayt kɔntrol haz, layt transmishɔn, sɔfays hadnɛs, anti-glare pefɔmɛns, adhesive kɔmpatibiliti, ɛn optik inspekshɔn standad.
Membran Switch ɛn Kɔntrol Panɛl dɛn
PET we dɛn kin print wit had-kɔt na in dɛn kin yuz fɔ mek mɛmbran switch, grafik ɔvlay, kipad, ikwipmɛnt lɛbl, ɛn mɔtalman-mashin intafɛs. Dɛn aplikeshɔn ya nid fɔ rili kɔtin adheshon, print adheshon, ɛmbos pefɔmɛns, dimɛnshɔnal stebiliti, ɛn rɛsistɛns to ripit kɔntakt.
Ritayl Displei ɛn Sayn dɛn
Yu kin yuz PET sheet dɛn we klia, mat, ɛn we dɛn print fɔ displei dɛn we dɛn kin yuz fɔ sɛl, fɔ gɛt prayz panɛl dɛn, panɛl dɛn we dɛn kin yuz fɔ mek pipul dɛn no bɔt di tin dɛn we dɛn de mek, fɔ mek dɛn kɔva fɔ mek dɛn mek tin dɛn, fɔ mek sayn dɛn we dɛn kin yuz fɔ mek sayn dɛn, ɛn fɔ mek displei dɛn we dɛn kin yuz bak.
Furniture ɛn Dekorativ Surface Protɛkshɔn
Anti-skratch PET film kin lamin ɔ put am pan fɔnicha panɛl, dɛkɔretiv sɔfays, aplayans panɛl, kabinɛt kɔmpɔnɛnt, domɔt, shelf, ɛn ɔda prɔdak dɛn we nid fɔ gɛt say we go de te ɛn izi fɔ klin.
Adhesive, lamination temperechur, surface tension, dimensional change, color consistency, ɛn resistance to household chemicals fɔ validet bifo dɛn prodyuz am.
Protektiv Barɛri, Vayza, ɛn Kɔva
Dɛn kin yuz transparent PET fɔ protɛkt kɔva, mashin gad, ikwipmɛnt winda, vayza, fes shild, dɔkyumɛnt protɛkshɔn, ɛn tɛmporari barɛri usay dɛn nid fɔ bil laytwɛt ɛn fɔ si.
Medikal, sefty, ɔ pɔsin in prɔtɛktiv ikwipmɛnt aplikeshɔn dɛn nid fɔ gɛt sɛpret verifyeshɔn fɔ optik kwaliti, impak pefɔmɛns, kemikal rɛsistɛns, hajɛns rikwaymɛnt, divays standad, ɛn rigyuletɔri kɔmplians. Wan jenɛral-pɔpɔs PET sheet nɔ fɔ ɔtomɛtik diskrayb as mɛdikal-grɛd ɔ sef-sɛtifiket.
Tɛmofɔm ɛn Blista Pakɛj
Sɔm anti-skrach PET gred dɛn kin yuz fɔ shalo fɔm, blista pak, tre, protɛktiv insɛt, ɛn vaykum-fɔm kɔmpɔnɛnt dɛn. Wan kɔtin we de wok fayn pan flat sheet kin krak, wayt, ɔ lɔs adheshon we i de dip fɔm.
Di wan dɛn we de bay fɔ gi di fɔm tɛmpracha, drɔ dip, di mold jɔyometri, di we aw dɛn de ɔt, di saykl tɛm, ɛn di say we dɛn nid fɔ luk so dat dɛn go ebul fɔ evalyu wan fayn fɔm kɔtin.
Di Opshɔn dɛn fɔ Prɔses ɛn Fabrik
Fɔ print
Dɛn kin mek anti-skratch PET fɔ skrin printin, UV printin, ɔfset printin, dijital printin, ɔ ɔda we dɛn fɔ print. Di sayd we dɛn de print, di ink kemistri, di tritmɛnt we dɛn de yuz fɔ mek di say we dɛn de print, di ɛnaji we dɛn de yuz fɔ mɛn di tin dɛn, di we aw di ink de adheshon, ɛn di kɔndishɔn dɛn we dɛn de du afta dɛn dɔn prosɛs am.
Day Kɔt, Panch, ɛn Slit
Dɛn kin slit shit ɛn rol dɛn, panch dɛn, kɔt dɛn day, gilɔtin dɛn, ɔ mek dɛn to kɔstɔm dimɛnshɔn dɛn. Tul shap, kot kliarens, kotin brit, protɛktiv film, ɛn ed-kwaliti rikwaymɛnt afɛkt di finish rizɔlt.
Fɔl ɛn Kris
Fɔlding-bɔks aplikeshɔn dɛn nid fayn kris dizayn, gren ɔ ɛkstrushɔn-dayrɛkshɔn ɛvalueshɔn, shit tɛmpracha, fɔlding rayus, ɛn kɔtin fleksibiliti. Prodakshɔn sɛmpul dɛn fɔ fold ɛn inspɛkt fɔ krak, wayt, ɛn kɔtin separeshɔn.
Tɛmofɔmin ɛn Vaykum Fɔm
Thermoforming suitability dipen pan di PET gred ɛn kɔtin fɔmyulashɔn. Dip drɔ, shap kɔna, ay fɔm rɛsɛshɔn, ɔ pasmak tɛmpracha kin pwɛl wan kɔtin we nɔ fɔm. HSQY rikɔmɛnd fɔ tɛst di aktual mold ɛn prodakshɔn paramita bifo bɔku ɔda.
Lamineshɔn ɛn Adhesive Bonding
Dɛn kin lamin PET sheet dɛn to pepabɔd, plastic, mɛtal, panɛl dɛn we dɛn mek wit wud, layers we dɛn print, adhesive film, ɔ dekɔretiv sabstret. Di bonding sayd fɔ spɛsifa bikɔs sɔm kɔtin dɛn we nɔ de skrach kin ridyus di adhesive ɔ ink adhesion.
Standart PET vs Anti-Skrat PET vs PETG ɛn Polikabɔnɛt
| Ficha |
Standart PET |
Anti-Skrat PET |
PETG |
Polikabɔnɛt |
| Surface Scratch Resistans fɔ mek yu nɔ ebul fɔ waka |
Men |
Impruv tru kotin ɔ surface tritmɛnt |
Besik pas nɔmɔ dɛn kɔt am |
Besik pas nɔmɔ dɛn kɔt am had |
| Fɔ du tin klia wan |
Ay |
Ay we dɛn pik wan klia kɔtin |
Ay |
Ay |
| Tɛmofɔmin we dɛn kin yuz fɔ mek tin dɛn |
I fayn wit di kɔrɛkt PET gred |
I nid fɔ gɛt fɔmabl kɔtin ɛn prodakshɔn tɛst |
Jɛnɛral wan izi fɔ fɔm |
Fɔmabl bɔt i nid fɔ kɔntrol di tɛmpracha fayn fayn wan |
| Impekt Pɔfɔmɛnshɔn |
Gud |
Gud, dipen pan di sabstret ɛn tik |
Gud |
Rili ay |
| Tipik Rizin fɔ Sɛlekshɔn |
Fɔ pak klia wan ɛn fɔ print we nɔ de tek bɔku mɔni |
Bɛtɛ lɔng tɛm surface apinans ɛn durability |
Komplex fɔm ɛn fɔm |
High impak ɛn dimand injinɛri aplikeshɔn dɛn |
Di bɛst matirial dipen pan di surface durability, impak rikwaymɛnt, fɔm dip, tɛmpracha, optik kwaliti, printin we, kemikal ɛksplɔshɔn, rigyuletɔri rikwaymɛnt, ɛn badjɛt.
Aw fɔ Pik di Rayt Anti-Skratch PET Sheet
Fɔ rikomɛnd wan fayn matirial, HSQY nid mɔ infɔmeshɔn pas tik ɛn sheet saiz. Di wan dɛn we de bay fɔ gi dɛn tin ya:
Faynal aplikeshɔn ɛn di savis layf we dɛn de op fɔ
Tik, waid, lɔng, ɔ rol dayamita we dɛn nid
Klia, tint, kɔlɔ, mat, glos, frɔst, ɔ anti-glare finish
Rikwayd pensil hadnɛs ɔ abrasion-rɛsistɛns target
Rikwayd layt transmishɔn ɛn maksimal haz
Singl-sayd ɔ dabl-sayd kɔtin
Di we aw dɛn de print, di kayn ink, ɛn di say we dɛn de print
Day kɔt, fold, panch, bond, ɔ lamination prɔses
Tɛmofɔmin tɛmpracha, drɔ dip, ɛn mold jɔyometri
Kεmikכl, klin, כyl, כ disinfεktant we de kכntakt di sכfa
UV ɛksplɔshɔn ɛn indo ɔ ɔdasay ɔpreshɔn ɛnvayrɔmɛnt
Rikwayd protɛktiv film ɛn pak we fɔ pak am
Ɛstimat ɔda kwantiti ɛn ɛni ia pɔyzin volyum
Fɔ sɛn wan kɔrɛnt matirial sampul, tɛknikal drɔin, finish-prɔdak foto, spɛsifikɛshɔn shit, ɔ tɛst standad kin ridyus spɛsifikɛshɔn mistek ɛn aksɛleret kot.
Kwaliti Kɔntrol fɔ Had-Kɔt PET Shit dɛn
Dɛn fɔ gri pan di inspekshɔn plan we dɛn nid bifo dɛn prodyuz bɔku bɔku wan. Dipen pan di aplikeshɔn, kwaliti kɔntrol kin inklud:
Tik, waid, lɔng, ɛn dayagɔnal mɛzhɔmɛnt
Inspekshɔn fɔ di sɔfays fɔ si if skrach, patikyula, kɔtin nɔ fayn, ɛn kɔntaminɛshɔn
Layt transmishɔn ɛn haz tɛst
Pensil hadnɛs ɛn abrashɔn tɛst
Kɔtin adheshon tɛst
Kɔlɔ, glos, ɛn sɔfa-tɛkstɔr mɛzhɔmɛnt
Flatnɛs, kɔl, waynd, ɛn rol-ɛj inspekshɔn
Print, fold, fɔm, ɔ kemikal-rɛsistɛns validɛshɔn
Protektiv-film adheshon ɛn rimobul tɛst
Pɔfɔmɛnshɔn valyu dɛn gɛt minin nɔmɔ we dɛn dɔn difayn klia wan di we aw dɛn de du di tɛst, di sampul kɔndishɔn, lod, saykl kɔnt, tɛmpracha, ikwipmɛnt, ɛn di krayteria fɔ aksept.
Yu tink se Anti-Skratch PET Sheet Yu kin Risaykul?
PET na risaykul thermoplastic, bɔt di prɛktikal risaykulbiliti fɔ wan finish anti-skratch PET prodak dipen pan in kɔmplit kɔnstrɔkshɔn ɛn di risaykul sistɛm we de na di dɛstineshɔn makit.
Di tin dɛn we dɛn kin kɔt, ink, adeziv, lɛbl, fim dɛn we de protɛkt, lamineshɔn, kɔlɔ, kɔntaminɛshɔn, ɛn tin dɛn we gɛt bɔku layt kin afɛkt di we aw dɛn kin sɔt ɛn risaykul. Di wan dɛn we de bay fɔ chɛk if dɛn gri wit di lokal risaykul dɛn ɛn dɛn fɔ avɔyd fɔ mek '100% risaykul' klem dɛn we nɔ gɛt kɔndishɔn we dɛn nɔ ebul fɔ evalyu di prɔdak we dɔn dɔn.
If yu yuz sɔfays we go te, dat kin mek di tin we dɛn kin yuz fɔ pak tin, kɔva, displei, ɔ panɛl, lɔng, bɔt di tin we go de fɔ lɔng tɛm ɛn di we aw i go ebul fɔ risaykul na difrɛn tin dɛn fɔ tink bɔt fɔ wok.
Wetin Mek Yu Pik HSQY Anti-Skratch PET Shit?
PET sheet manufakchurin ɛn intanashɔnal sapɔt ɛkspiriɛns
Shit ɛn rol fɔmat fɔ print, pak, ɛn fɔ yuz na di industri
Tiknes de frכm lεk 0.1mm to 3mm
Rol widths op to aprɔksimatli 1300mm
Standart sheet dɛn we go rich 1220 × 2440mm ɛn kɔstɔmayz dimɛnshɔn dɛn
Klia, tint, kɔlɔ, glos, mat, ɛn frɔst opshɔn dɛn
Di tin dɛn we dɛn mek fɔ kɔt, slit, kɔt, fim we de protɛkt, ɛn pak
Sampul evalueshɔn fɔ print, fɔm, fold, ɛn sɔfays tɛst
Bɔlk saplai fɔ kɔnvɔta, printa, pak manifakta, distribyushɔn, ɛn industrial yuza
Eksplɔrɔ wi anti-skrat PET sheet ɛn film ɔ si di 1mm transparent anti-skrat PET rigid sheet.
Anti-Skratch PET Sheet FAQ we dɛn kin aks fɔ
Wetin na di difrɛns bitwin anti-skrach PET ɛn standad PET?
Standard PET gɛt wan sɔfa we dɛn nɔ trit ɔ we dɛn dɔn trit kɔvɛnshɔnal wan. Anti-skrach PET gɛt ɔda sɔfayz tritmɛnt ɔ had kɔtin we de ɛp fɔ mek i nɔ gɛt skɔf, abrashɔn, ɛn mak dɛn we dɛn de handle. di bays mεtirial kin bi di sem, bכt di sheet we dεn kכt nכmal fכ mεnten in apinεns fכ lכng insay hεy-kכntakt aplikεshכn dεm.
Anti-skrat min se di PET sheet nɔ go ebul fɔ skrach?
Nɔ. Anti-skrach min se di sɔfa de gi impɔtant rɛsistɛns ɔnda difayn kɔndishɔn dɛn. Shap tul dɛn, tin dɛn we de abrayd, prɛshɔn we pasmak, kemikal dɛn we de fɛt, ɛn we dɛn we nɔ fayn fɔ klin kin stil pwɛl di kɔtin.
Us pensil hadnɛs de fɔ anti-skrach PET?
Di hadnɛs we de dipen pan di kɔtin, PET sabstret, di tik we di shit tik, di we aw dɛn nid fɔ mek fɔm, ɛn di we aw dɛn de tɛst am. Baya dɛn fɔ spɛsifa di target hadnɛs, aplai lod, tɛst standad, ɛn akseptabl rizɔlt. Nɔto ɔltɛm i kin bɛtɛ if di sheet fɔ dip dip wan, fɔ fold am, ɔ fɔ ɛmbos am.
Us tik tik dɛn de?
HSQY anti-skratch PET shit ɛn film dɛn jɔs de frɔm lɛk 0.1mm to 3mm. Eksakt avaylabl dipen pan di wit, surface finish, kotin konfigyushɔn, ɔda kwantiti, ɛn di prɔsesin we dɛn nid.
Yu tink se dɛn kin gi anti-skrach PET insay rol dɛn?
Yɛs. HSQY kin saplae slit rol ɛn kɔstɔmayz-wid rol. Dɛn fɔ kɔnfyus di rol wit, di kɔr saiz, di dayamita we de na do, di wet we di rol gɛt, di dairekshɔn fɔ waynd, di fim we de protɛkt di fim, di tin dɛn we dɛn nid fɔ splays, ɛn aw fɔ pak am bifo dɛn mek am.
Yu tink se dɛn kin kɔt ɔl tu di say dɛn na di PET sheet tranga wan?
Yɛs. Dɛn kin tɔk bɔt di tritmɛnt dɛn we dɛn kin yuz fɔ trit di singl-sayd ɛn dabl-sayd sɔfays. Dabl-sayd kɔtin kin mek di kɔst go ɔp ɛn i kin afɛkt di printin, bonding, lamination, ɛn fɔm, so di wok we ɛni sayd de du klia wan.
Yu tink se anti-skrach PET fayn fɔ print?
I kin fayn fɔ print na skrin, fɔ print UV, fɔ print ɔfset, ɛn ɔda tin dɛn, bɔt di we aw ink kin adheshon kin dipen pan di say we dɛn kɔt ɛn print. Di wan dɛn we de bay fɔ tɛst di rial ink, di we aw i de mɛn, di we aw i de adhe, di kɔlɔ we i de, ɛn di kɔndishɔn we i de afta dɛn dɔn prosɛs am.
Yu tink se dɛn kin mek anti-skrach PET sheet?
Sɔm gred dɛn kin thermoformed, bɔt nɔto ɔl had kɔtin fayn fɔ dip drɔ. Di kɔtin kin krak, wayt, ɔ nɔ kin adhesion if di tin strɛch pasmak. Dɛn fɔ tɛst di mold, drɔ rishɔ, di ɔt profayl, di kɔtin sayd, ɛn fɔm tɛmpracha.
Yu tink se anti-skrach PET nɔ gɛt kemikal ɛn disinfɛktant?
Kεmikכl rεsistεns kin difrεnt bay di kכt εn kεmikכl. Di wan dɛn we de bay fɔ gi di rayt klin, disinfɛktan, sɔlvɛnt, ɔyl, kɔnsɛntreshɔn, tɛmpracha, kɔntakt tɛm, ɛn frɛkuɛns fɔ klin. Dɛn fɔ du di tɛst bifo dɛn gri fɔ mek dɛn klin di tin bak.
Yu tink se dɛn kin ad anti-statik ɔ anti-glare pefɔmɛns?
Anti-statik, anti-glare, UV-resistant, anti-finga prɛnt, kemikal-resistant, mat, ɛn tɛkstɔr fɛnshɔn dɛn kin de as kɔstɔm opshɔn dɛn. Ɛni fɛnshɔn fɔ kɔnfɔm sɛpret bikɔs i kin afɛkt optik klia, haz, printin, fɔm, ɛn MOQ.
Anti-skratch PET kin tek ples fɔ glas?
PET kin tek ples fɔ glas na sɔm layt kɔva dɛn, pak winda dɛn, displei dɛn, ɔvlay dɛn, ɛn tin dɛn we de protɛkt dɛn. Bɔt PET ɛn glas gɛt difrɛn stiffness, ɔt resistans, optik bihayvya, surface hadness, flammability, ɛn regulatory characteristics. Di las dizayn fɔ evalyu fɔ di rial aplikeshɔn.
Aw dɛn fɔ klin di anti-skrach PET sheet dɛn?
Yuz klos we saf, klin, we nɔ de abrayd ɛn klin we dɛn dɔn validet fɔ di kɔtin we yu dɔn pik. Nɔ yuz abrasive pad, dɔti klos, paoda, shap tul, ɛn sɔlvɛnt we dɛn nɔ gri fɔ yuz. Rimov di dɔst we nɔ tay bifo yu was fɔ ridyus di abrashɔn we de na di say we yu de.
Yu tink se sampul dɛn de bifo yu ɔda bɔku bɔku wan?
Dɛn kin tɔk bɔt di matirial sɛmpul dɛn we de fɔ di we aw dɛn de luk, fɔ print, fɔ fold, fɔm, fɔ kɔt, ɛn fɔ tɛst if dɛn kɔmpit. Kastɔm kɔtin ɔ spɛshal-sayz sɛmpul dɛn kin nid fɔ divɛlɔp ɛn pripia mɔ.
Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?
Duya gi di aplikeshɔn, tik, shit ɔ rol saiz, kɔlɔ, sɔfays finish, kɔtin sayd, hadnɛs rikwaymɛnt, optik rikwaymɛnt, printin ɔ fɔm prɔses, protɛktiv-film rikwaymɛnt, ɔda kwantiti, ɛn di kɔntri we yu de go.
Rikwest fɔ wan Anti-Skratch PET Shit Kɔteshɔn
Kontakt HSQY Plastik fɔ anti-skrach PET shit, klia rigid PET fim, PET rol, had-kot PET, mat PET, printabl PET, pak-windo PET, ɛn kɔstɔmayz funkshɔnal PET matirial.
Send wi yu teknikol rikwaymɛnt, target aplikeshɔn, drɔin, kɔrɛnt matirial sampul, tɛst standad, ɛn ɛstimat kwantiti. Wi tim go evaluate di aprɔpriet tiknes, surface finish, coating configuration, rol ɔ sheet format, ɛn di we aw dɛn pak am.
Rikwest wan Anti-Skratch PET Kot
