Wetin Na BOPET/PE Silin Film?
BOPET/PE siling film , we dɛn kin kɔl bak BOPET/PE lidding film, polyester/PE trey film ɔ laminated top-seal film, na fleksibul pak matirial we de kɔba wan biaxially oriented PET ɔta layt wit wan PE-based fud-kɔntakt siling layt.
Di BOPET layt de gi transparency, glos, tɛnsiɛl trɛnk, stiffness, dimɛnshɔnal stebiliti ɛn wan say we dɛn kin print. Di modifyed PE layt de gi ɔt-silin pefɔmɛns agens wan kɔmpitabl PE, modifyed-polyolefin ɔ PE-kɔt trey flɛnch.
HSQY de saplae ɔl tu di izi-pil BOPET/PE lidding film ɛn lɔk-sil BOPET/PE lidding film fɔ kɔmpitabl PET/PE trey, PET/EVOH/PE trey ɛn ɔda it kɔntena dɛn wit wan fayn PE siling sɔfays.
Di film strɔkchɔ, siling bihayvya, barɛri lɛvɛl, rol dimɛnshɔn ɛn funkshɔn tritmɛnt dɛn fɔ pik akɔdin to di aktual trey, pak it, siling mashin ɛn stɔrɔj kɔndishɔn.
Wetin Na di Difrɛns Bitwin BOPET/PE ɛn PET/PE Film?
PET/PE na wan jenɛral matirial diskripshɔn fɔ wan film we gɛt wan polyɛsta layt ɛn wan polyɛtilin silin layt.
BOPET/PE na wan mכr spεsifi k PET/PE strכkchכ we di PET כta film dεn bin biaxially oriented di tεm we dεn de prodyuz.
Biaxial orienteshɔn de impruv tɛnsiɛl trɛnk, stiffnɛs, dimɛnshɔnal stebiliti, optik apinans ɛn prɔsesin pefɔmɛns. Fɔ dis rizin, dɛn kin pik BOPET as di ɔda layt fɔ print tre-lid laminat dɛn.
| Kɔmpiashɔn |
PET/PE Film |
BOPET/PE Film |
| PET Layer we de na di wɔl |
Jɛnɛral PET ɔta ɔ strɔkchɔral layt |
Biaxial oriɛnted PET ɔta layt |
| Mekanikal Pɔfɔmɛnshɔn |
Dipen pan di PET gred we yu dɔn pik ɛn di prodakshɔn prɔses |
Higher tensile strength, stiffness ɛn dimɛnshɔnal stebiliti |
| Fɔ print |
Available akɔdin to di tritmɛnt we dɛn dɔn gi di sɔfayz |
Dɛn kin pik am fɔ mek dɛn print am fayn fayn wan na di say we dɛn de ɔ fɔ mek dɛn print am bak |
| Di Tipik Yuz |
Jɛnɛral laminated pak ɛn trey silin |
Print izi-pil ɛn lɔk-sil trey-lid fim |
Aw Dɛn Strukchɔ BOPET/PE Lidding Film?
| Film Komponent |
Men Fɔnkshɔn |
Baya Kɔnsidɛreshɔn |
| BOPET Ɔta Layer |
Gi klia, stiffness, trɛnk, dimɛnshɔnal stebiliti ɛn printabiliti |
Konfam tik, haz, glos, shrinkage en surface tritment |
| Lay we de print |
I de kɛr branding, infɔmeshɔn, barɔd, QR kɔd ɛn rɛjista mak |
Kɔnfɛm printin sayd, kɔlɔ, ripit lɔng ɛn ay-mak pozishɔn |
| Lamineshɔn Adhesive fɔ di tin dɛn we dɛn de yuz |
Bonds BOPET to PE ɛn opshɔnal fɛnshɔnal layers |
Kɔnfɛm di tɛm fɔ mɛn, di trɛnk we di bon gɛt, di ɔda tin dɛn we de smɛl ɛn di kɔndishɔn dɛn we pɔsin kin gɛt wit it |
| Opshɔnal EVOH Barɛri Layer |
Ridyus ɔksijɛn ɛn MAP gas transmishɔn |
Spɛsifik di target OTR, WVTR, gas miksɔp ɛn shelf-layf kɔndishɔn dɛn |
| Modified PE Silant Layer we dɛn dɔn chenj |
Krio wan izi-pil ɔ lɔk sil agens wan kɔmpitabl PE sɔfays |
Match di PE fɔmyulashɔn to di trey flɛnch ɛn di sil trɛnk we dɛn nid |
| Opshɔnal Anti-Fɔg Tritmɛnt |
Ridyus di kɔndenseshɔn drɔp dɛn we pɔsin kin si |
Kɔnfɛm anti-fɔg sayd, stɔrɔj tɛmpracha ɛn di tɛm we dɛn nid |
BOPET/PE Sial Film Spɛsifikeshɔn dɛn
Di tebul we de kam biɛn ya sɔmariz di kɔrɛnt HSQY izi-pil ɛn lɔk-sil BOPET/PE lidding-film rɛnj. Faynal garanti valyu dɛn fɔ de na di apruv tɛknikal data shit ɛn di spɛsifikɛshɔn fɔ bay.
| Tayp fɔ Prodakt |
BOPET/PE Tray Liding Film |
| Matirial Strukchɔ |
BOPET laminated wit wan modifyed PE silin layt |
| Di Opshɔn dɛn fɔ Sil |
I izi fɔ pul, had pil, lɔk sil ɔ weld sil |
| Rifrɛns Tiknɛs |
aprכksimatli 0.052–0.09 mm, we ikwal to 52–90 μm |
| Rol Width Rɛnj we yu de yuz |
Na lɛk 150–900 mm |
| Width dɛn we dɛn dɔn pik |
180 mm, 320 mm, 400 mm, 640 mm ɛn kɔstɔm wit dɛn |
| Rifrɛns Rol Lɛngth |
Na lɛk 500 m, wit kɔstɔm lɔng dɛn we de |
| Kor Dayamita we de na di kɔr |
Customized akɔdin to di trey siling mashin |
| Aw a luk |
Klia, glos, mat ɔ kɔstɔm print |
| Praymari Aplikeshɔn fɔ Trey |
PET/PE trey, PET/EVOH/PE trey, PE trey ɛn PE-kɔt silin sɔfays |
| Anti-Fɔg we dɛn kɔl |
Opshɔnal ɛn aplikeshɔn-spɛsifi k |
| Standart Barɛri |
Jɛnɛral mɔstɔ, aroma ɛn prodakt protɛkshɔn |
| Opshɔn we gɛt ay-baria |
EVOH ɔ ɔda fɛnshɔnal barɛri strɔkchɔ we de bay prɔjek |
| Yuz Maykrowev ɔ Ɔvin |
Aplikeshɔn-spɛsifi k tɛmal gred nɔmɔ |
| Yuz Friza |
Aplikeshɔn-spɛsifi k lɔw-tɛmpracha gred nɔmɔ |
| Fɔ print |
Fleksografik ɔ gravu printin we de bay prɔjek |
| Ikwipmɛnt dɛn we Kɔmpatibl |
Manual, semi-ɔtomɛtik ɛn ful ɔtomɛtik trey silin mashin dɛn |
| Rifrɛns MOQ |
Na lɛk 1,000 kg pan wan spɛsifikɛshɔn |
| Rifrɛns Lid Taym |
lεk 10–15 dez fכ sεlekt standad prodak dεm; kɔnfɔm spɛshal ɛn print gred dɛn |
Izi-Pil BOPET/PE Lidding Film
Easy-peel BOPET/PE film na fɔ gi pakej intagriti we dɛn de ful-ɔp, stɔrɔj ɛn transpɔt we i de alaw di kɔshɔma fɔ pul di lid wit kɔntrol fɔs.
Di modifyed PE sialant de kɔntrol di we aw di fim de separet frɔm di kɔmpatib trey flɛnch.
Wan fim we dɛn dɔn pik fayn fayn wan we izi fɔ pul fɔ gi:
Kontroled peel-initiashɔn fɔs
Stebul peel-prɔpageshɔn fɔs
Wan-pies lid we dɛn kin pul
Ridyus di film shredding ɔ tearing
Limitɛd sialant rɛsɛdyu
Sufayf distribyushɔn ɛn lik rɛsistɛns
Kɔnsistɛns opin afta dɛn dɔn kip am kol
Rivyu HSQY in dɛn izi-pil BOPET/PE trey lidding film fɔ konsuma-frenli opin aplikeshɔn dɛn.
Lok-Sil BOPET/PE Liding Film
Lɔk-sil BOPET/PE fim, we dɛn kin kɔl bak weld-sil ɔ pɔrmanent-sil film, de mek wan strɔng ɛn sɔbstanshal nɔ-izi-pil kloz.
Dɛn kin pik am we likwid kɔntɛnshɔn, tamper ɛvidɛns, gas ritɛnshɔn ɛn transpɔt sikyɔriti impɔtant pas kɔshɔma peelabiliti.
Lɔk-sil paket dɛn kin nid fɔ kɔt, pank ɔ te bifo yu yuz dɛn. Di fim nɔ fɔ prɔmot as izi pil pas dɛn gi difrɛn silin fɔmyulashɔn ɛn validet.
Rivyu HSQY in dɛn lok-sil BOPET/PE lidding film fɔ sikyuɔr fud-trey klos.
Easy Peel vs. Lok Sil
| Kɔmpia |
Izi Pil |
Lɔk Sil |
| Di We Aw Dɛn De Opin |
Kontrol manual peeling |
I kin nid fɔ kɔt, pank ɔ te |
| Kɔnvɛnshɔn fɔ Kɔnsuma |
I pas am pas dat |
Ridyus |
| Pakɛj Sikyuriti |
Balans wit opin kɔnvinɛns |
Strɔng resistans to aksidɛntal opin |
| Tipik Aplikeshɔn dɛn |
Salad, dɛzat, dairy fud ɛn kɔshɔma-rɛdi it |
Fɔd we gɛt likwid, fudsavis pak ɛn transpɔt-sɛnsitiv prɔdak |
| Men Risk |
Wan wik peel formulation kin ridyus distribyushɔn sikyɔriti |
If di sil trɛnk pasmak, dat kin mek di fim chɛr ɔ i kin pwɛl di tre |
Us Trey dɛn we BOPET/PE Film Sial?
BOPET/PE de diskraib di film strɔkchɔ, bɔt di trey kɔmpatibiliti de ditarmin mɔ bay di modifyed PE siling layt ɛn di matirial we de na di trey flɛnch.
| Tray Material |
Kompatibiliti Gaydɛns |
Fim we dɛn dɔn rɛkɔmɛnd |
| PET/PE Trey we dɛn kin yuz |
Praymari aplikeshɔn we di flɛnch prɛzɛnt wan kɔmpitabl PE silin sɔfays |
I izi fɔ pul ɔ lɔk-sil BOPET/PE |
| PET/EVOH/PE Trey we dɛn kin yuz |
Bɔku tɛm i kin kɔmpitabl we di ɔdasay silin layt de kɔntinyu fɔ bi PE |
Standart ɔ EVOH ay-barɛri BOPET/PE |
| PE ɔ PE-Kɔt Trey |
I kin kɔmpitabl we di trey ɛn film PE gred dɛn de gi di intarakshɔn we dɛn nid |
Aplikeshɔn-spɛsifi k BOPET/PE silan gred |
| Plɛn APET ɔ rPET Trey |
Standart PE silan kin nɔ bon dairekt to wan plein PET sɔfays |
Dairekt-to-PET koted film ɔ PET-kɔmpatibl silin |
| CPET Trey we dɛn kin yuz |
Standard BOPET/PE nɔ fɔ ɔtomɛtik trit as ovenable ɔ CPET-kɔmpatibl |
Dediket CPET silin ɛn tɛmal gred |
| PP ɔ PP/EVOH/PP Trey |
Wan PP flɛnch nɔmal wan nid fɔ gɛt PP-kɔmpatibl silin layt |
BOPET/CPP ɔ EVOH/PP fim |
| PS, PVC ɔ Aluminium Trey |
Rikways sabstret-spɛsifi k silin kemistri |
Dediket kot ɔ yunivasal-sil fim |
| Tray we gɛt pepabɔd we dɛn kɔt |
Kompatibiliti dipen pan di polima kɔtin na di pepabɔd flɛnch |
Film bin mach to di rayt pepabɔd kɔtin |
Fizik trey sɛmpul ɔ wan kɔmplit tre-layer spɛsifikɛshɔn fɔ gi bifo dɛn kɔnfɔm wan kɔmɛshɔnal fim ɔda.
Fɔ PET/PE trey aplikeshɔn, rivyu HSQY dɛn siling film fɔ PET/PE trey dɛn .
Fɔ PP trey dɛn, rivyu di BOPET/CPP silin-film rεnj .
Ki Benefits fɔ BOPET/PE Lidding Film
High clarity: Transparent BOPET de sɔpɔt klia prodak prɛzɛntɛnshɔn.
Glossy appearance: Di BOPET ɔta surface de gi wan prɛmiɔm rital finish.
Mɛkanikal trɛnk: BOPET de gi tɛnsiɛl trɛnk, stiffnɛs ɛn dimɛnshɔnal stebiliti.
Riliable heat siling: Modified PE de gi izi-pil ɔ lɔk-sil pefɔmɛns pan kɔmpitabl sɔfays.
Moisture resistance: PE de ɛp fɔ ridyus wata-vapour transmishɔn ɛn sɔpɔt likwid kɔntinɛnt.
Kastom printin: Yu kin ad logo, grafik, instrɔkshɔn, barɔd ɛn ay mak.
Opshɔnal anti-fɔg: Dɛn kin mek di chill-fud visibiliti bɛtɛ wit wan aplikeshɔn-spɛsifi k tritmɛnt.
Opshɔnal ay barɛri: Dɛn kin ad EVOH we dɛn nid fɔ gɛt difayn ɔksijɛn barɛri.
Prodakshɔn-layn kɔmpatibiliti: Dɛn kin mek di rol dimɛnshɔn ɛn di wɛb prɔpati dɛn mach wit di trey sila.
Aplikeshɔn fɔ BOPET/PE Silin Film
Chilled Ready Meals we dɛn dɔn mek fɔ it
Yu kin yuz BOPET/PE film fɔ kol pasta, rays dish, mit we dɛn kuk, vɛjitebul, sos ɛn it we dɛn dɔn pripia we dɛn pak insay kɔmpatib PET/PE trey.
Fresh Mit ɛn Pɔltri
Aplikeshɔn-spɛsifi k izi-pil, lɔk-sil, anti-fɔg ɛn ay-baria strɔkchɔ dɛn kin divɛlɔp fɔ bif, bɔd, chukchuk, tik ɛn prɔses mit.
Fish ɛn Sifud
Fish filɛt, shrimps, shel fish ɛn sifud we dɛn dɔn pripia kin nid fɔ mek dɛn nɔ gɛt mɔstɔ, fɔ trit dɛn anti-fɔg, fɔ mek dɛn nɔ gɛt pankchɔ ɛn fɔ mek dɛn gɛt EVOH barɛri layt.
Salad, Frut ɛn Vɛjitebul
Yu kin yuz fim dɛn we izi fɔ pul ɛn we nɔ de mek fɔg fɔ mek salad we dɛn dɔn pripia, frut we dɛn kɔt, vɛjitebul ɛn tin dɛn we dɛn dɔn kol.
di prodyuz we de blo kin nid maykroperforeshכn כ kכntrold gas transmishכn pas fכ wan hεmεtik pakej we gεt hכy barεri.
Dairy Prodakt ɛn Desɛt dɛn
Di tin dɛn we dɛn kin yuz na chiz pat, dairy dessert, pudding, mousse ɛn ɔda frij prɔdak dɛn we dɛn pak insay kɔmpatib trey.
Bekeri ɛn Kɔnfɛkshɔn
Yu kin yuz klia ɔ print fim fɔ kek, paste, kɔnfɛkshɔn ɛn bekeri tre usay dɛn nid fɔ si di prɔdak ɛn fɔ protɛkt di mɔstɔ.
Foodservice ɛn Sɛntral Kichin dɛn
Dɛn kin evalyu lɔk-sil fim dɛn fɔ sos, it we dɛn dɔn pripia ɛn fudsavis pak dɛn we nid fɔ gɛt strɔng likwid kɔntinɛnt ɛn distribyushɔn sikyɔriti.
Standart BOPET/PE vs. Ay-Baria PET/EVOH/PE Film
Standard BOPET/PE film de gi yusful mɛkanikal protɛkshɔn, mɔstɔ rɛsistɛns ɛn silabiliti. I nɔ fɔ ɔtomɛtik wan we dɛn kɔl fim we gɛt bɔku ɔksijɛn.
| Kɔmpiashɔn |
Stɛndad BOPET/PE |
PET/EVOH/PE Ay Barɛri |
| Men Protɛkshɔn |
Mekanikal trɛnk, mɔstɔ rɛsistɛns ɛn ɔt silin |
Ad wan difayn ɔksijɛn ɛn MAP gas barɛri |
| MAP Suitability we yu go ebul fɔ du |
Nɔto ɔtomɛtik wan fayn fɔ ɔksijɛn-sɛnsitiv MAP |
Disain fɔ validet ay-baria MAP sistem dɛn |
| Data we dɛn nid |
Sil trɛnk ɛn jenɛral prodak-protɛkshɔn rikwaymɛnt dɛn |
Target OTR, WVTR, gas miks, trey barɛri ɛn shelf layf |
| Tipik Aplikeshɔn dɛn |
Jɛnɛral chilled it, bakery, salad ɛn foodservice pak |
Mit, bɔd, sifud, chiz ɛn it dɛn we gɛt ɔksijɛn |
Fɔ MAP aplikeshɔn, rivyu HSQY’s EVOH-based ay-baria PET/PE silin film .
Anti-Fɔg BOPET/PE Film
Anti-fog tritmɛnt de chenj di we aw kɔndens mɔstɔ de biev pan di fim we de fes di it.
Insted fכ fכm sεparat dכp dεm we wi kin si, mכsichכ de spre insay wan layεr we tכn εn transparent. Anti-fog film nɔ de pul mɔstɔ ɛn i nɔ de mek kɔndenseshɔn nɔ apin.
Di pefɔmɛns dipen pan di it tɛmpracha, di mɔstɔ kɔntinyu, di kol spid, friji tɛmpracha, di tɛmpracha we de chenj, di fim ɔriɛnteshɔn ɛn di tɛm we dɛn de kip am.
Rivyu HSQY in dɛn anti-fog PET/PE silin-film rεnj .
Maykrowev, Ɔvin ɛn Friza Kɔmpatibiliti
Yu tink se Standard BOPET/PE Film kin bi Maykrowev?
Standard BOPET/PE film nɔ fɔ ɔtomɛtik diskrayb as maykrowevable.
Maykrowev aplikeshɔn dɛn nid fɔ gɛt wan dediket tɛmal gred we dɛn tɛst wit di aktual trey, it, pawa lɛvɛl, ɔt tɛm ɛn stim-rilis instrɔkshɔn dɛn.
Yu tink se yu kin yuz BOPET/PE Film na Kɔnvɛnshɔnal Ɔvin?
Standard BOPET/PE film nɔ de ɔtomɛtik ɔvinable. Kɔnvɛnshɔnal-ɔvin pak nid fɔ gɛt sɛpret validet ay-tɛmpracha film ɛn wan kɔmpatib ɔvinable trey.
Yu tink se dɛn kin yuz BOPET/PE Film fɔ Frɔzɛn Fɔd?
Dɛn kin mek sɔm lɔw tɛmpracha strɔkchɔ dɛn we dɛn dɔn pik, bɔt dɛn nɔ spɛsifa di standad lɔk-sil gred as friza-sef.
Friza tɛst fɔ evaluate impak rɛsistɛns, film fleksibiliti, laminate bond, sil ritɛnshɔn ɛn opin bihayvya afta thaw.
Tray-Sealing Mashin Kɔmpatibiliti
BOPET/PE rollstock kin kɔnvɔyt fɔ manual, sɛmi-ɔtomɛtik, rotary ɛn ful ɔtomɛtik trey silin mashin dɛn.
Di wan dɛn we de bay fɔ gi:
Tray-sealer manifakta ɛn mɔdel
Tray mold ɛn kaviti layout
Width we dɛn nid fɔ mek di fim
Kor insay dayamita
Maksimal rol ausayd dayamita
Maksimal wet we di rol gɛt
PE sial sayd wund insay ɔ na do
Film unwind dairekshɔn
Di tɛmpracha we dɛn kin sial
Prɛshɔn fɔ sial
Dwɛl tɛm
Prodakshɔn spid
Sistem fɔ kɔt fim
Sensa fɔ print-rɛjista
Atmosfɛrik, gas-flush ɔ MAP prɔses
HSQY de saplae bak fud trey silin mashin fɔ standad ɔt silin ɛn sɛlɛkɛt MAP aplikeshɔn dɛn.
Aw fɔ Establish di Kɔrɛkt Silin Windo
Di siling winda na di rεnj כf tεmprachכ, prεshכn εn di tεm we i de de we de mek wan akseptabl paket we nכ de damej di film כ trey.
Prodakshɔn trayal dɛn fɔ ebul fɔ evaluate:
Minimum sil-initiashɔn tɛmpracha
Maksimal tempɔret bifo film ɔ trey distɔrshɔn
Prɛshɔn we dɛn nid fɔ sial
Minimum ifektiv tɛm fɔ de
Hot-tak trɛnk
Sial trɛnk afta yu dɔn kol
Pil-initiashɔn ɛn prɔpageshɔn fɔs
Wan-pies opin bihayvya
Sil-thru-kɔntaminɛshɔn pefɔmɛns
Wrinkles ɛn chanɛl lik
Tray-flange difɔmeshɔn
Film tracking ɛn kɔt
Lik ɛn bɔrst rɛsistɛns
Kɔmɔn BOPET/PE Silin Prɔblɛm dɛn
| Prɔblɛm |
Posisibul Kɔz |
Aytem dɛn fɔ Chɛk |
| Film Nɔ De Sial |
Inkompatibl trey surface, rivas film, low temperechur ɔ po tul kɔntakt |
Tray flange, PE siling sayd, temperechur, prɛshɔn ɛn tɛm fɔ de |
| Wik ɔ Inkɔnsistɛns Sil |
Fɔd kɔntaminɛshɔn, trey we nɔ ivin, tɛmpracha nɔ stebul ɔ prɛshɔn we nɔ rich |
Flɛnch klin, trey flatnɛs, mashin kɔntrol ɛn silin tul |
| Fim we Izi-Pil Na I at fɔ Opin |
Tɛmpratura we pasmak, prɛshɔn ɔ tɛm fɔ de, ɔ wan gred we nɔ kɔrɛkt fɔ silin |
Kɔnfɛm di izi-pil gred ɛn ajɔst di siling winda |
| Sil De Opin Tu Izi |
Insufishɛnt siling ɛnaji ɔ wik pasmak fɔmyulashɔn fɔ di pil |
Film gred, trey surface, prɛshɔn, tɛmpracha ɛn kondishɔn tɛm |
| Film Tears Insted of fɔ pul am |
Sil trɛnk pas di film trɛnk ɔ di trey nɔ gɛt wan ifektiv peel tab |
Film tiknes, peel fos, laminate bond ɛn trey dizayn |
| Wrinkles na di Sil |
Nɔ ivin wɛb tɛnsiɔn, po trakin, trey distɔrshɔn ɔ tul misalaynmɛnt |
Rol tɛnsiɔn, wɛb alaynɛshɔn, trey pozishɔn ɛn tul flatnɛs |
| Pakɛj Lik dɛn |
Chanɛl lik, kɔntaminɛshɔn, film pankchɔ, krak trey ɔ sil we nɔ kɔmplit |
Flɛnch klin, film intɛgriti, trey kɔndishɔn ɛn kɔmplit sil kɔntinyuiti |
| Film Delamination |
Nɔ adekwayt adhesive cure, pasmak ɔt ɔ kemikal ɛkspos |
Bond strכng, kכryu tεm, rεsidyual sכlvεnt εn it kכmכshכn |
| Poor Rol Fidin we nɔ fayn |
Teleskoping, blok, inkɔrɛkt wayndin ɔ nɔ fayn kɔfishin fɔ frikshɔn |
Rol kɔnstrɔkshɔn, stɔrɔj, wɛb tɛnsiɔn ɛn wayndin dairekshɔn |
BOPET/PE Film we dɛn print wit kɔstɔm
Di BOPET ɔda layt de gi wan stebul ɛn klia printin sɔfa fɔ branded trey pak.
Di wok dɛn we dɛn kin du fɔ mek fim dɛn we dɛn print kin gɛt:
Brand logo ɛn prɔdak nem dɛn
Di tin dɛn we dɛn yuz fɔ mek di it ɛn di infɔmeshɔn bɔt aw fɔ it
Instrɔkshɔn fɔ stɔrɔj, opin ɛn pripia
Bakɔd ɛn QR kɔd dɛn
Date-code ɛn batch-code eria dɛn
Transparent prodakt winda dɛn
Rejista mak fɔ ɔtomɛtik trey sila dɛn
Di wan dɛn we de bay fɔ gi at wok we dɛn kin ɛdit, di fim wit, print ripit, kɔlɔ rɛfrɛns, ay-mak pozishɔn, trey ɔriɛnteshɔn ɛn PE silin-sayd wayndin dairekshɔn.
Fɔ Kɔmplians fɔ Fɔd-Kɔntakt
Fɔd-kɔntakt suitabiliti dipen pan di ɛksaktɔl BOPET rɛsin, PE silan, adeziv, barɛri layt, anti-fɔg tritmɛnt, ink, it tayp, kɔntakt durayshɔn ɛn stɔrɔj kɔndishɔn.
Di wan dɛn we de bay fɔ aks fɔ di dɔkyumɛnt dɛn we de fɔ di rayt fim gred we dɛn dɔn gri fɔ, we gɛt fɔ du wit:
Teknik data sheet we de na di wɔl
Sɛtifiket fɔ di analisis
Fɔd-kɔntakt diklareshɔn
Maygrɛshɔn ɔ kɔmplians tɛst ripɔt dɛn
Di we aw dɛn de tɛst di sil-strɛng
Ristrikt-sɔbstans stetmɛnt dɛn
Batch traceability infɔmeshɔn
ISO kwaliti-sistim sɛtifikeshɔn nɔ fɔ prɛzɛnt as prodak-spɛsifi k pruf se ɛvri fim ɔtomɛtik wan de fala ɔl di it-kɔntakt rigyuleshɔn dɛn.
Yu tink se BOPET/PE Silin Film Risaykul?
BOPET εn PE de pan difrεn polimכr famili dεm. Wan BOPET/PE laminate nɔ fɔ ɔtomɛtik diskrayb as mono-matirial ɔ yunivasal risaykul fim.
Aktual risaykulbiliti dipen pan:
BOPET-to-PE rεshכ
EVOH ɔ ɔda layers we de wok
Lamineshɔn adhesive
Printin ink ɛn anti-fɔg tritmɛnt dɛn
Matirial fɔ trey
If dɛn kin separet di lid frɔm di trey
Fɔd kɔntaminɛshɔn
Lokal kɔlɛkshɔn ɛn sɔt infrastukchɔ
Destineshɔn-maket dizayn-fɔ-risaykul gaydlayn dɛn
Mono-PET-kompatibl kot film ɔ PE-rich risaykul-oriɛnted strɔkchɔ dɛn kin evalyu as sɛpret prɔjek.
Di Opshɔn dɛn fɔ Kɔstɔmayz
Kastom tot ɔl film tik
Kastom BOPET ɛn PE layt ratio
Izi-pil, had-pil ɔ lɔk-sil fɔmyulashɔn
Customized peel fos ɔ weld trɛnk
Anti-fɔg tritmɛnt
EVOH ay-barɛri strɔkchɔ
Kastom OTR ɛn WVTR target dɛn
Sil-thru-kɔntaminɛshɔn pefɔmɛns
Struktrɔ we nɔ de pan pankchɔ
Aplikeshɔn-spɛsifi k maykrowev ɔ tɛmal gred
Aplikeshɔn-spɛsifi k friza gred
Kastom printin ɛn rɛjista mak dɛn
Kastom rol wit ɛn lɔng
Kastom kor ɛn maksimal rol dayamita
Kastom winding dairekshɔn
Kastom katon, lɛbl ɛn ɛkspɔt palet
Kwaliti-Kɔntrol Rikwaymɛnt dɛn
BOPET ɛn PE raw-matirial verifyeshɔn
Total film tiknes ɛn tolɛreshɔn
Rol wit ɛn lɔng
Kor saiz ɛn rol ɔdasay dayamita
Winding tension ɛn rol alaynɛshɔn
Transparency, haze ɛn glos
Lamineshɔn-bɔnd trɛnk
Residual solvent we i apɔynt
Kofishin fɔ frikshɔn
Sil-initiashɔn tɛmpracha
Hot-tak trɛnk
Pil ɔ lɔk-sil trɛnk
Wan-pies opin bihayvya
Pankchɔ ɛn tɛnsiɛl pefɔmɛns
Anti-fog tɛst we dɛn spɛsifa am
OTR ɛn WVTR we dɛn spɛsifa
Print kɔlɔ ɛn rɛjista kɔrɛkt wan
Fɔd-kɔntakt dɔkyumentri rivyu
Infɔmeshɔn we Yu nid fɔ gɛt Kot
Tray matirial ɛn kɔmplit layt strɔkchɔ
Material na di trey siling flange
Fizik trey sampul dɛn
Tray dimenshɔn ɛn flɛnch wit
Fɔd ɔ prɔdak we dɛn pak
Fɔd filin tɛmpracha
Ambient, chilled ɔ frɔzɛn stɔrɔj kɔndishɔn dɛn
I izi fɔ pul ɔ lɔk-sil rikwaymɛnt
Existing film sampul ɔ target peel fɔs
Anti-fog we dɛn nid
High-barrier ɔ MAP rikwaymɛnt
OTR ɛn WVTR we dɛn nid
Maykrowev, ɔvin ɔ friza we yu nid
Rikwayd film tik
Film wit ɛn rol lɔng
Kor insay dayamita
Maksimal rol ausayd dayamita ɛn wet
PE siling-sayd winding dairekshɔn
Tray-sealer manifakta ɛn mɔdel
Sial tɛmpracha, prɛshɔn ɛn tɛm fɔ de
Prodakshɔn spid
Fim we dɛn print ɔ we dɛn nɔ print
Atwok ɛn print ripit lɔng
Dokumɛnt we dɛn nid fɔ gɛt fɔ kɔntakt it
Ɔda kwantiti ɛn ɛni ia kɔnsɔmshɔn
Di kɔntri we yu want fɔ go, di pɔt ɔ adrɛs usay dɛn de sɛn di tin dɛn
Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt BOPET/PE Sealing Film
Wetin dɛn mek BOPET/PE lidding film wit?
i nכmal wan kכnsis fכ wan biaxially oriented PET כta layεr we dεn laminεt to wan modifyed PE fud-kכntakt siling layεr.
BOPET/PE na di sem wit PET/PE fim?
BOPET/PE na wan spεsifi k PET/PE strכkchכ we di PET כta layεr dεn bin biaxially oriented fכ impruv strכng εn dimεnshכnal stεbiliti.
Wetin di BOPET layt de du?
BOPET de gi klia, glos, tɛnsiɛl trɛnk, stiffnɛs, dimɛnshɔnal stebiliti ɛn wan ɔda say we yu kin print.
Wetin di PE layt de du?
Di modifyed PE layt de mek di ɔt sil ɛn kɔntrol izi-pil ɔ lɔk-sil bihayvya pan wan kɔmpitabl trey flɛnch.
BOPET/PE kin film sial PET/PE trey dɛn?
Yɛs. PET/PE trey wit wan kompitibul PE siling surface na di praymar aplikeshɔn.
I kin sial PET/EVOH/PE trey dɛn?
Bɔku tɛm i kin kɔmpitabl we di ɔdasay silin layt na di trey de kɔntinyu fɔ bi PE. Di kɔmplit barɛri ɛn sil fɔ stil tɛst.
BOPET/PE film kin sial plein APET ɔ rPET trey dɛn?
Nɔto fɔ se na so i bi. Wan plein PET flɛnch kin nid fɔ gɛt dairekt-to-PET kɔtin ɔ ɔda PET-kɔmpatibl siling layt.
BOPET/PE kin film sial PP trey dɛn?
Standard kompitibiliti nɔ fɔ bi asum. PP trey dɛn nɔmal fɔ nid BOPET/CPP ɔ ɔda PP-kɔmpatibl silin strɔkchɔ.
Wetin na di difrɛns bitwin izi fɔ pul ɛn lɔk sil?
Fim we izi fɔ pul kin opin wit pawa we dɛn kin kɔntrol. Lɔk-sil film de fɔm wan strɔng ɔ substantially pɔrmanent kloz.
Us tik tik dɛn de?
di kכrant rεfrεns rεnj na aprכksimatli 52–90 μm, wit kכstכm tiknes dεm we de.
Us rol wit dɛn de?
di rεfrεns wit rεnj na lεk 150–900 mm. Di waid dɛn we dɛn pik inklud 180 mm, 320 mm, 400 mm ɛn 640 mm.
Wetin na di standad rol lɔng?
Sεlektεd standad prodakt dεm de yuz wan rεfrεns rol lεngth we de arawnd 500 m.
Yu tink se anti-fog BOPET/PE fim de?
Yɛs. Dɛn kin mek anti-fɔg tritmɛnt fɔ it we dɛn dɔn kol, salad, mit, sifud, dairy ɛn rɛdi-mɛl pak.
Na standad BOPET/PE film ay barɛri?
Nɔ. wan difayn ɔksijɛn barɛri nɔmal wan nid EVOH ɔ ɔda validet ay-baria layt.
Yu tink se dɛn kin yuz BOPET/PE fim fɔ MAP?
Yes, we dɛn jɔyn wan ay-baria fim wit wan kɔmpitabl ay-baria trey, rilibul sil ɛn validet MAP prɔses.
Yu tink se standad BOPET/PE film kin bi maykrowev?
Standard film nɔ fɔ ɔtomɛtik wan de na maykrowev. Wan sɛpret kwalifay maykrowev-grɛd fim nid fɔ de.
Yu tink se dɛn kin yuz standad BOPET/PE fim na ɔvin?
Standard film nɔ kin ɔtomɛtik ɔvenable. Dɛn nid wan dediket ay-tɛmpracha fim ɛn kɔmpatib trey.
Yu kin yuz BOPET/PE film fɔ frɔzɛn it?
Dɛn kin mek wan gred we gɛt lɔw tɛmpracha, bɔt di standad lɔk-sil gred we de naw nɔ spɛsifa as friza-sef.
Wetin mek di fim nɔ de sidɔm na di tre?
Di kɔmɔn tin dɛn we kin mek i apin na wan flɛnch we nɔ kɔmpitabl, rivas fim, inɔf ɔt, nɔ fayn prɛshɔn, shɔt tɛm fɔ de ɔ di tul kɔntakt nɔ fayn.
Wetin mek di fim we izi fɔ pul kin rɔtin we dɛn de opin am?
Sil trɛnk kin pas di film trɛnk, di laminat kin pwɛl ɔ di tre kin nɔ gɛt wan ifektiv peel tab.
Di fim kin sial tru sos, ɔyl ɔ mɔstɔ?
Di fɔmyulashɔn dɛn we dɛn dɔn pik kin ebul fɔ bia wit smɔl kɔntaminɛshɔn, bɔt di trey flɛnch fɔ stil kip am klin ɛn dray as i pɔsibul.
Yu tink se dɛn kin print BOPET/PE fim bay dɛnsɛf?
Yɛs. Dɛn kin print logo, grafik, prɔdak infɔmeshɔn, barɔd, QR kɔd ɛn rɛjista mak dɛn akɔdin to at wok we dɛn dɔn gri fɔ.
Yu tink se BOPET/PE lidding film yu kin risaykul?
Na multi-polymer laminate ɛn dɛn nɔ aksept am ɔlsay na PET ɔ PE risaykul sistɛm. Di kɔmplit pakej nid fɔ gɛt wan asɛsmɛnt fɔ di makit.
Wetin na di minimum ɔda kwantiti?
Di kɔrɛnt rɛfrɛns MOQ na lɛk 1,000 kg pan wan spɛsifikɛshɔn.
Wetin na di prodakshɔn lida tɛm?
Di rεfrεns lida tεm na lεk 10–15 dez fכ sεlekt standad prodak dεm afta dεn kכnfכm di spεsifikεshכn εn dipכsit.
A kin aks fɔ sampul ɔ trial rol?
Sampl ɔ trayal rol dɛn kin tɔk bɔt fɔ trey kɔmpatibiliti, izi-pil, lɔk-sil, anti-fɔg, barɛri ɛn prodakshɔn-layn tɛst.
Rikwest wan BOPET/PE Lidding Film Kot
Yu de luk fɔ BOPET/PE lidding-film manifakta, izi-pil trey film, lɔk-sil film, anti-fɔg film ɔ EVOH ay-baria pak sɔlvishɔn?
Kɔntakt HSQY fɔ aks fɔ tɛnki rɛkɔmɛndishɔn, trey kɔmpatibiliti tɛst, trayal rol, kɔstɔm printin, rol spɛsifikɛshɔn, faktri prayz ɛn intanashɔnal shiping infɔmeshɔn.
Rikwest fɔ gɛt Kot
