Krismas Tri Gred PVC Rigid Film fɔ Atikul Lif

Krismas Tri Gred PVC Rigid Film fɔ Atikul Lif

HSQY Krismas tik gred PVC rigid film na fɔ atifishal tik lif, krawn, gras ɛn dɛkɔretiv fɛns, wit 0.15-1.2mm tik, 15-1300mm waid, mat/plein sɔfays ɛn kɔstɔm matirial gred.

Di matirial de saplae in grɛn, dak grɛn ɛn ɔda kɔstɔmayz shed fɔ atifishal Krismas tik manifakta ɛn dɛkɔretiv foliage prodyusɔ dɛn we nid kɔntrol tik, waid, stiffness, surface appearance ɛn rol pak.

Difrɛn vajin ɛn risaykul PVC rishɔ dɛn de akɔdin to di kɔrɛnt prodak spɛsifikɛshɔn, we de alaw bayer dɛn fɔ pik wan matirial gred bays pan aw i luk, prɔsesin stebiliti, kɔmɛshɔnal rikwaymɛnt ɛn finish-prɔdakt ɛkspɛkteshɔn.

Krismas Tri Gred PVC Fim Spɛsifikeshɔn dɛn

Spɛsifikeshɔn Notis: Faynal tik, waid, grɛn shed, sɔfays apinans, stiffnɛs, risaykul-kɔntinɛnt rɛtɛshɔn ɛn rol kɔnfigyushɔn fɔ kɔnfɔm akɔdin to di kɔstɔma in dɔn fɔliaj ɛn prodakshɔn ikwipmɛnt.

Wetin Na Krismas Tri Gret PVC Film?

Krismas tik gred PVC fim na wan kɔlɔ rigid ɔ sɛmi-rigid PVC matirial we dɛn kin yuz as raw matirial fɔ atifishal lif, pain-stayl fɔlia, krawn, atifishal gras ɛn dɛkɔretiv fɛns prodak.

Di film kin saplae insay wayd rol ɔ narrower widths akɔdin to daunstrim kɔnvɔyt rikwaymɛnt. We dɛn de mek atifishal-tri, dɛn kin kɔt ɔ slit di matirial insay lif komponent dɛn ɛn jɔyn am wit branch ɔ waya strɔkchɔ dɛn.

Fɔ industrial prodakshɔn, kɔlɔ kɔnsistɛns, tiknɛs stebiliti, stiffnɛs, sɔfayz finish, kɔt bihayvya ɛn rol wayndin impɔtant pas fɔ jɔs pik matirial bay nominal tiknɛs.

Wetin Mek Yuz PVC Fim fɔ Atikul Krismas Ti Lif?

• Kastɔm ​​grɛn shed dɛn: Yu kin yuz grɛn, dak grɛn ɛn ɔda kɔlɔ dɛn we dɛn aks fɔ fɔ mek difrɛn lif dɛn luk.

• Adjustable stiffness: Di kɔrɛnt prodak spesifikeshɔn de alaw fɔ kɔstɔmayz sɔftnɛs akɔdin to di kɔstɔma in finish lif ɛn prodakshɔn prɔses.

• Waid tiknes rεnj: 0.15-1.2mm kכba difrεn atifishal fכliaj, gras εn dεkorεtiv fεns rikwaymεnt dεm.

• Kastom widths: 15-1300mm sɔpɔt narrow kɔnvɔtin rikwaymɛnt dɛn ɛn bak wayda rol saplai.

• Mat ɔ plain surface: Dɛn kin pik difrɛn surface appearances akɔdin to di finished foliage effect we yu want.

• Vɛjin ɛn risaykul gred: Dɛn kin pik difrɛn matirial rɛsɛshɔn dɛn akɔdin to di kɔmɛshɔnal ɛn prɔdak rikwaymɛnt dɛn.

• Kastom pak: Dɛn kin tɔk bɔt di tin dɛn we dɛn nid fɔ pak di lɛbl ɛn pak akɔdin to wetin dɛn nid fɔ ɛkspɔt ɛn prodakshɔn.

Aw fɔ Pik PVC Film Tiknɛs

Di korekt tiknes dipen pan di finished foliage design, rikwayd stiffness, strip width, konvayt ikwipment en intended application.

Fɔ riplesmɛnt prɔjek, fɔ gi wan PVC fim sampul we dɔn de ɔ we dɔn dɔn atifishal lif na di we we dɛn kin rili abop pan fɔ kɔmpia tik, stiffness, kɔlɔ ɛn sɔfays apinans.

Mat vs. Plɛn PVC Krismas Tri Film

Di fainal surface apinans fɔ evaluate pan di kɔnvɔyt atifishal lif bikɔs fɔ kɔt, fold ɛn branch asɛmbli kin chenj aw di film de riflekt layt.

Grin Shade & Kɔlɔ Match

Bɔku tɛm, di wan dɛn we de mek atifishal Krismas tik dɛn kin jɔyn bɔku bɔku grɔn shed dɛn fɔ mek dip ɛn fɔ mek di lif dɛn we gɛt difrɛn difrɛn tik dɛn tan.

If kɔnsistɛns kɔlɔ maching impɔtant, gi wan aprɔv fizik PVC sampul, atifishal lif ɔ finish branch as di rɛfrɛns. Wan kɔlɔ diskrɔpshɔn we dɛn rayt lɛk dak grin nɔmɔ nɔ go du fɔ mek dɛn ripit di prodakshɔn.

Kastom Slit Width fɔ Atikul Tri Prodakshɔn

Di kɔrɛnt prodak spesifikeshɔn kɔba wit frɔm lɛk 15mm to 1300mm. Dis de alaw di wan dɛn we de bay fɔ tɔk bɔt smɔl smɔl matirial fɔ mek dɛn prodyuz di fɔlij dɛn we de dɔŋ di wata ɔ fɔ mek dɛn ebul fɔ mek di rol dɛn we big fɔ mek dɛn chenj am mɔ.

We yu de ɔda narrow-width matirial, gi di width we yu nid, tolerans, rol dimɛnshɔn ɛn mashin-lod rikwaymɛnt so dat di rol kɔnfigyushɔn go mach to di kɔnvɔtin prɔses.

Virgin & Risaykul PVC Gret Opshɔn dɛn

Di infɔmeshɔn bɔt di prɔdak we de naw de list 4 kɔmɛshɔnal matirial-grɛd dairekshɔn dɛn we dɛn bays pan difrɛn vajin ɛn risaykul PVC rɛsɛshɔn dɛn.

Risaykul-kɔntinɛnt rεshɔn kin inflɔws di apinɛns, di kɔlɔ kɔnsistɛns, smel, mɛkanikal bihayvya ɛn prɔsesin stεbiliti. So dɛn fɔ kɔnfɔm di gred we fit bay we dɛn yuz di kɔstɔma in rial finish-prɔdakt rikwaymɛnt pas fɔ pik am nɔmɔ bay di kɔst fɔ di matirial.

Ki Kwaliti Fakta fɔ Krismas Tri PVC Film

Aplikeshɔn fɔ Krismas Tri Gred PVC Film

PVC Film fɔ Atikul Krismas Ti dɛn

Grin PVC film de yuz as raw matirial fɔ atifishal foliage ɔlsay na Krismas tik branch dɛn. Dɛn kin jɔyn difrɛn shed dɛn insay wan tik fɔ mek yu si am difrɛn difrɛn tin dɛn.

Di aprɔpriet film spɛsifikɛshɔn dipen pan lif saiz, branch dizayn, waya kɔnfigyushɔn, rikwayd foliage density ɛn daunstrim kɔnvɔyt ikwipmɛnt.

PVC Film fɔ Wreaths & Dekorativ Foliage

Krismas tik gred PVC fim kin chenj bak to foliage fɔ wreath ɛn ɔda atifishal dɛkɔretiv grɛn. Bayer kin pik grɛn shed, surface finish ɛn stiffness akɔdin to di finished decoration.

PVC Film fɔ Atikul Gras & Fɛns Prodakt

Di prɔdak pej we de naw gɛt bak di list fɔ atifishal gras ɛn dɛkɔretiv fɛns aplikeshɔn dɛn. Dɛn prɔdak ya kin nid difrɛn tik, stif ɛn wit spɛsifikɛshɔn frɔm atifishal Krismas tik lif dɛn.

Fɔ yuz gras ɔ fɛns na do, dɛn fɔ spɛsifa di wɛda ɛn UV rikwaymɛnt sɛpret wan. Standart Krismas tri gred PVC fim nɔ fɔ ɔtomɛtik asum fɔ mit wan difayn ɔda UV savis rikwaymɛnt.

Flame & UV Rikwaymɛnt dɛn

Atikul Krismas tik ɛn dɛkɔretiv prɔdak kin bi ɔnda di kɔstɔma, ritayla ɔ ples-maket rikwaymɛnt fɔ flaym pefɔmɛns, wɛda ɔ UV rɛsistɛns.

Di kɔrɛnt sɔs spɛsifikɛshɔn nɔ de tɔk wan spɛshal flaym-ritdant klasifikeshɔn ɔ UV rɛsistɛns lɛvɛl fɔ ɛvri gred. If dɛn nid fɔ du dɛn wok ya, gi di aplikebul tɛst standad, klasifikeshɔn ɛn savis kɔndishɔn so dat dɛn go kɔnfyus di aprɔpriet fɔmyulashɔn ɛn sɔpɔtin dɔkyumentri.

Us Infɔmeshɔn Yu Fɔ Gi Fɔ Kot?

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt Krismas Tri PVC Film

Wetin na Krismas tri gred PVC fim?

Na kala rigid ɔ sɛmi-rigid PVC fim we dɛn kin yuz as raw matirial fɔ atifishal Krismas tik lif, krawn, gras ɛn dɛkɔretiv fɛns prodak.

Us tik tik dɛn de?

Di kɔrɛnt ditayl prodak spɛsifikɛshɔn de list tiknes frɔm 0.15mm to 1.2mm.

Us wayd dɛn de?

Di kɔrɛnt ditayl spɛsifikɛshɔn de list di wit frɔm lɛk 15mm to 1300mm.

Yu tink se yu kin mek di grɛn shed we yu want?

Yɛs. Grin ɛn dak grɛn na di standad dairekshɔn dɛn we de naw, ɛn dɛn kin tɔk bɔt di kɔlɔ dɛn we dɛn dɔn kɔstɔmayt. I fayn fɔ mek yu yuz fizik fim ɔ fɔliej sɛmpul we dɔn dɔn fɔ mek di kɔlɔ mach kɔrɛkt wan.

Yu tink se mat PVC fim de?

Yɛs. Di kɔrɛnt prodak spesifikeshɔn de list ɔl tu di Matt ɛn Plɛn sɔfays opshɔn dɛn.

Yu tink se dɛn kin mek di fim saf saf?

Yɛs. Di ɔrijinal prodak spesifikeshɔn se dɛn kin kɔstɔmayz di softnɛs. Fɔ gi wan film we dɔn de ɔ di lif sampul we dɔn dɔn de ɛp fɔ difayn di fil ɛn stiffness we dɛn nid.

Yu tink se dɛn kin yuz PVC we dɛn dɔn risaykul?

Yɛs. Di pej we de naw de list A, B, C ɛn D gred dairekshɔn wit difrɛn vajin ɛn risaykul PVC rεshɔn.

100% vajin PVC de?

Yɛs. Di A Gred spɛsifikɛshɔn we de naw, dɛn rayt am as 100% vajin matirial.

Dis PVC film flame retardant?

Wan spesifik flame-retardant klasifikeshɔn nɔ de insay di kɔrɛnt ditayla spɛsifikɛshɔn. If dɛn nid fɔ mek di flaym wok, gi di standad we dɛn fɔ yuz ɛn di klasification we dɛn nid fɔ mek dɛn kɔnfɔm.

Yu tink se di fim nɔ gɛt UV?

Standard matirial nɔ fɔ ɔtomɛtik trit as UV-stabilized. Di gras, fɛns ɔ dɛkɔreshɔn projɛkt dɛn we de na do fɔ sho di UV ɛn wɛda pefɔmɛns we dɛn nid.

Yu tink se dɛn kin gi di fim insay smɔl smɔl waid dɛn?

Yɛs. di width rεnj we de naw de stat na lεk 15mm. Gi di slit wit ɛn tolɛreshɔn we yu nid we yu de aks fɔ kot.

Yu tink se dɛn kin yuz dis PVC fim fɔ mek atifishal gras ɛn fɛns?

Yɛs. Atifishal gras ɛn dɛkɔretiv fɛns prodakt dɛn na list aplikeshɔn dɛn. Dɛn fɔ spɛsifa di tin dɛn we dɛn nid fɔ du fɔ wok na do apat frɔm ɔda wan.

Wetin na di MOQ?

Di prodak ditel we de naw de list wan MOQ we na 5000 mita fɔ wan saiz. Di kɔstɔm kɔlɔ ɛn di matirial gred dɛn fɔ kɔnfɔm wit di kot.

Wetin na di tɛm we dɛn kin sɛn di tin?

di kכrant prכdak spεsifikεshכn de list lεk 2-3 wik. Faynal timing dipen pan di konfam spesifikeshɔn, kwantiti ɛn prodakshɔn schedule.

Aw di fim pak?

Di kɔrɛnt prodak spesifikeshɔn list rol pak wit PE fom, plastic film, katon ɛn palet. Wi kin tɔk bak bɔt aw fɔ kɔstɔmayz di lɛbl ɛn pak.

Us infɔmeshɔn a fɔ gi fɔ kot?

Duya gi di prodak we dɔn, tik, waid, grɛn shed, mat ɔ klin sɔfays, stiffness we dɛn nid, vajin ɔ risaykul gred, rol kɔnfigyushɔn, kwantiti, prodakshɔn-mashin infɔmeshɔn ɛn ples fɔ go.

Ditiɛl dɛn bɔt aw fɔ pak di tin dɛn

Di kɔrɛnt prodak spesifikeshɔn list rol pak wit PE fom, plastic film, katon ɛn palet. Ekspɔt pak fɔ protɛkt di fim frɔm kɔntaminɛshɔn, krɔsh ɛn rol damej we dɛn de lod ɛn transpɔt.

Sɛtifiket dɛn & Dokumɛnt dɛn

Di prodak pej we de naw de rifer to SGS sɛtifiket. Baya dɛn we nid spɛshal flaym, UV, risaykul-kɔntinɛnt ɔ dɛstineshɔn-maket dɔkyumentri fɔ kɔnfɔm se di tɛst ripɔt we de de aplay to di ɛksaktɔl ɔda PVC fɔmyulashɔn.

HSQY Plastik Grup Ɛgzibishin dɛn

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae PVC rigid sheet matirial , PVC fleksibul film, PET film, PVC fom bod ɛn ɔda plastic matirial to intanashɔnal manifakta ɛn distribyushɔn. Krismas tik fim projɛkt dɛn kin tɔk bɔt akɔdin to tik, wit, kɔlɔ, sɔfa, stiffness, risaykul-kɔntinɛnt rishɔ ɛn rol pak rikwaymɛnt.