Atikewɔwɔ PVC Blister Film

Atikewɔwɔ PVC Blister Film Dɔwɔƒe & Nudzrala

HSQY Plastic wɔa atike PVC blister film kple laminated medicinal packaging films na atikekuiwo, atikekuiwo, atikekuiwo, atikekuiwo, nunyiametikewo, lãwo ƒe atikewo kple atikewɔmɔnu bubu siwo dze.

Míaƒe atikewo wɔwɔ-film ƒe hatsotso la dometɔ aɖewoe nye PVC film sesẽ, PVC / PVDC film, PVC /PE film kple PVC / PVDC /PE composite film . Woate ŋu atsɔ tinted kple opaque grades siwo me kɔ, siwo me kɔ la ana kple woƒe titrime si wowɔ ɖe ɖoɖo nu, slit ƒe kekeme, agbalẽ xatsaxatsa ƒe didime, nu vevi ƒe lolome, winding ƒe ɖoɖo kple mɔxenu ƒe wɔwɔme le blister-packaging ƒe nudidiwo nu.

Ele be woatia atikewɔnuwo ƒe ʋuʋudedi be wòanye nubablɛ bliboa ƒe akpa aɖe. Atikea ƒe tsidzadza, oxygen kple kekeli ƒe seselelãme, taɖodzinu ƒe agbenɔƒe, mama ƒe yame ƒe nɔnɔme, blister cavity geometry, forming machine, aluminum lidding foil kple nutrenu ƒe nɔnɔmewo katã kpɔa ŋusẽ ɖe nu mamlɛtɔ tiatia dzi.

Ne èle atikewo ƒe ʋuʋudedi film wɔm alo le eɖɔlim la, ɖo wò fifi nɔnɔme, film ƒe titrime, web ƒe kekeme, mɔ̃ ƒe nɔnɔme, do ƒe goglome, mɔxenu ƒe nudidi kple ƒe sia ƒe zazã ɖe HSQY. Míaƒe ƒuƒoƒoa ate ŋu akpe asi ɖe dzesidede nusiwo sɔ na kpɔɖeŋu kple blister-line evaluation.

Nukae Nye Atikewɔwɔ PVC Blister Film?

Zi geɖe la, atikewo ƒe PVC ʋuʋudedi film nyea PVC wɔwɔ ƒe web si sesẽ, si wometsɔ aŋɔ wɔe o si wozãna tsɔ wɔa dowo le atike ƒe ʋuʋudedi ƒe agba siwo wotsɔ dzoxɔxɔ wɔe me. Le nu babla me la, wodoa dzo na PVC film la, wowɔa eƒe dowo, wotsɔa atikekui alo atikekuiwo yɔa wo me eye wotrenɛ ɖe atike ƒe nutsyɔnu si sɔ, si zi geɖe la, aluminum-gbadzɛ si wotsɔ dzoxɔxɔ-nutrenu-lacquered wɔe la nu.

Wozãa PVC si nye plain rigid geɖe elabena enaa nukpɔkpɔ nyuie, thermoforming dɔwɔwɔ si woɖo anyi, rigidity si ŋu viɖe le kple packing cost si me ga mele o. Gake dzidzenu PVC menaa tsi kple oxygen mɔxenu abe atike film siwo wofa alo esiwo wotsɔ lãgbalẽ wɔe ene o.

Eyata atike siwo sea tsidzadza, esiwo xɔa oxygen alo esiwo me tsi le ŋutɔ ate ŋu abia PVC / PVDC , PVC / PVDC /PE, PCTFE-based laminate, cold-form aluminum alo xɔtunu bubu si ƒe mɔxenu si kɔkɔ wu. Ele be woatsɔ liƒo ŋuti numekukuwo kple nubablɛwo ƒe kpeɖodzinana ado alɔ tiatia mamlɛtɔ.

Atikewɔwɔ PVC Film ƒe Adzɔnuwo ƒe Ƒomedodo

HSQY naa atikewo wɔwɔ-film xɔtuɖoɖo geɖewo na agbɔsɔsɔme vovovowo, do ƒe nɔnɔmewo kple mɔxenu ƒe nudidiwo.

Atikewɔwɔ PVC Blister Film ƒe Nɔnɔmewo

HSQY naa atike film ƒome geɖe siwo ƒe titrime, web-kekeme kple agbalẽ xatsaxatsa ƒe ɖoɖowo to vovo. Asixɔxɔ siwo gbɔna la ƒo nu tso nusiwo wotsɔna naa amewo ƒe tiatia siwo bɔ ŋu kpuie. Ele be woaɖo kpe nɔnɔme mamlɛawo dzi ɣesiaɣi na dzeside si wotia.

Ele be woaƒle atikewo ƒe ʋuʋudedi film ɖe ɖoɖo si dzi woda asi ɖo nu. Ele be woaɖe titrime ƒe mɔɖeɖe ɖe nu ŋu, slit ƒe kekeme, agbalẽ xatsaxatsa ƒe didime, nuto, afisi woƒoe ɖo, splices siwo ŋu woɖe mɔ ɖo, amadede, nusi wotsɔ blae ƒe kpekpeme, dzedzeme ƒe dzidzenuwo kple nyonyome ŋuti nuŋlɔɖi siwo hiã hafi woawɔe le asitsatsa me.

PVC kple PVC / PVDC kple PVC / PVDC /PE

Menye nusi ŋu mɔxenu kɔkɔtɔ le ye nye atikewo ƒe ʋuʋudedi film nyuitɔ kekeake kokoko o. Dɔwɔnu nyuitɔ naa ametakpɔnu si sɔ be wòakpɔ adzɔnua ƒe agbenɔƒe ƒe nudidi si dzi woda asi ɖo gbɔ esime wòléa wɔwɔme ƒe dɔwɔwɔ si sɔ kple eƒe babla ƒe gazazã bliboa me ɖe asi.

Alesi Atikewo ƒe Blister Packaging wɔa Dɔe

1. Film Unwinding: Woɖea atikewɔmɔnu ƒe web la le tete si dzi wokpɔ ŋusẽ ɖo me.

2. Dzoxɔxɔ: Film la toa dzoxɔxɔ ƒe akpa si dzi wokpɔna me vaseɖe esime wòɖoa nɔnɔme si hiã be wòawɔ la gbɔ.

3. Thermoforming: Vacuum, pressure, plug assistance alo nusiwo wotsɔ ƒo ƒui wɔa ʋuʋudedi ƒe dowo.

4. Atikewo Ƒe Kpekpe: Wotsɔa atikekuiwo, atikekuiwo alo agbɔsɔsɔme bubu siwo dzi woda asi ɖo la dea do siwo wowɔ la me.

5. Nutsyɔnu Zazã: Wotsɔa atikewo ƒe nutsyɔnu ƒe agbalẽvi si sɔ la dana ɖe ʋuʋudedi ƒe web la dzi.

6. Dzoxɔxɔ ƒe Nutrenu: Dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si wònɔa anyi naa lidding foil ƒe dzoxɔxɔ-nutrenu lacquer wɔa dɔ.

7. Dzodzro Kple Kɔda: Woléa ŋku ɖe adzɔnuwo ƒe anyinɔnɔ, agbalẽtata ŋuti nyatakakawo kple agbalẽgowo ƒe nyonyome ŋu.

8. Punching: Wolãa web si yia edzi la wòzua blister card siwo wowɔ vɔ.

PVC film ɖeɖe mefiaa package ƒe dɔwɔwɔ mamlɛtɔ o. Blister si wowu enu la nye web si le wɔwɔm, cavity geometry, dosage form, lidding material, sealing system kple secondary packaging.

Thermoforming Dɔwɔwɔ kple Mɔ̃a ƒe Ðekawɔwɔ

Titrime si nɔa anyi ɖaa, eƒe ʋuʋu si dzi wokpɔna, eƒe ʋuʋu ɖekae kple eƒe ʋuʋu pɛpɛpɛ le vevie ŋutɔ na atikewo ƒe bablawo. Vovototo le film la me ateŋu ahe web tracking, cavity formation, registration, sealing kple punching kuxiwo vɛ.

Ne wole kpɔɖeŋu nu biam la, ele be nuƒlelawo nana blister-mɔ̃a wɔla kple kpɔɖeŋu, wɔwɔ ƒe ɖoɖo, web kekeme, fli ƒe duƒuƒu, dzoxɔxɔ ƒe ɖoɖo, do ƒe goglome, indexing ƒe didime, wɔwɔ ƒe mɔfiame kple agbalẽ xatsaxatsa ƒe didime gãtɔ kekeake.

Nukae Wòle Be Woakpɔ Le Blister-Line Dodokpɔ Me?

• Roll unwinding kple web tracking

• Film ƒe teteɖeanyi ƒe liƒo

• Dzoxɔxɔ ƒe ɖekawɔwɔ le web la katã dzi

• Cavity gɔmesese kple dzogoe ƒe wɔwɔme

• Gli-titrime mama le ewɔwɔ vɔ megbe

• Film dzi ɖeɖe kpɔtɔ kple ŋkɔ dede agbalẽ me

• Yevuwɔwɔ, nuteɖeamedzi ƒe dzesiwo, kuɖɔ alo pinholes

• Flange gbadzaa hafi woatre enu

• Dzoxɔxɔ-nutrenu ƒe ɖekawɔwɔ

• Punching ƒe nyateƒetoto kple nugbɔ siwo wowu enu

Nusiwo sɔ kple Atikewɔwɔ ƒe Aluminium Lidding Foil

Zi geɖe la, wotrea PVC ʋuʋudedi film sesẽ la nu ɖe ​​atikewo ƒe aluminum-gbadzɛ si wotsɔa dzoxɔxɔ-nutrenu si sɔ la tsyɔ dzi. Nutrenu si ŋu kakaɖedzi le nɔ te ɖe nusiwo wotsɔ wɔe kple nusiwo wotsɔ blaa nu-mɔ̃a ƒe nɔnɔme siaa dzi.

Hafi woada asi ɖe edzi le asitsatsa me la, ele be nuƒlelawo nada film si wowɔ kple aluminum foil ƒe ƒuƒoƒo si tututu wowɔ la kpɔ le dzoxɔxɔ si woɖo be woatsɔ atre nu, nyaƒoɖeamenu kple ɣeyiɣi si woanɔ anyi la te.

• Nutrenu ƒe ŋusẽ

• Nutrenu ƒe ɖekawɔwɔ

• Channel ƒe tsi si le dodom

• Lacquer ƒe ɖekawɔwɔ

• Foil ƒe ɖeɖeɖa

• Push-to dɔwɔwɔ

• Nudzraɖoƒe kple liƒo ƒe dɔwɔwɔ

Dɔwɔwɔ si te ŋu nɔa te ɖe ɖeviwo nu, xɔlɔ̃wɔwɔ na ame tsitsiwo kple esi dzena le tɔtrɔ me nye nɔnɔme siwo le agbalẽvi ƒe nɔnɔme si wodo kpɔ bliboe ŋu eye mele be woagblɔ be PVC film ɖeɖeko gbɔe wòtso o.

Mɔxenu ƒe Nudidiwo Kple Atikewo ƒe Agbenɔƒe

Ele be atikewo ƒe bablawo nakpɔ atike la ta le eƒe agbenɔƒe si dzi woda asi ɖo me. Mɔxenu ƒe dɔwɔwɔ si hiã nɔ te ɖe atike ƒe wɔwɔme, tablet ƒe nutsyɔtsyɔ, capsule ƒe go, blister cavity ƒe lolome, film ƒe wɔwɔme, yame ƒe nɔnɔme, evelia ƒe babla kple mama ƒe nɔnɔmewo dzi.

Nyabiase Siwo Ŋu Nàɖo Hafi Nàtia Blister Film la

• Ðe nusi wowɔ la sea veve ɖe tsidzadza nua?

• Ðe nusi wowɔ la sea veve ɖe ɔksidzin nua?

• Ðe nusi wowɔ la sea veve ɖe kekeli nua?

• Nukae nye adzɔnuwo ƒe agbenɔƒe si wobia tso wo si?

• Yame ƒe nɔnɔme ƒe akpa ka mee woama nusi wowɔ la le?

• Nukae nye doa ƒe goglome kple ʋuʋudedi ƒe anyigba ƒe lolome?

• Ðe woazã mɔxenu evelia ƒe bablawoa?

• Mɔxenu ŋuti nyatakaka kawoe li tso pack si li fifia me?

Mɔxenu ƒe asixɔxɔ siwo wodzidze le film gbadza dzi ɖea vi na nusiwo wotsɔ dzraa nuawoe, gake dzoxɔxɔ ƒe wɔwɔme kekea nusi wotsɔ wɔe la ɖe enu eye wònaa wònɔa tsɛ. Eyata ele be woazã blister ƒe ɖoɖo ŋutɔŋutɔ si wowɔ atsɔ aɖo kpe agbalẽvi ƒe ametakpɔkpɔ mamlɛtɔ dzi.

PVDC Nutsyɔtsyɔ ƒe Kpekpeme kple Mɔxenu Tiatia

PVC / PVDC atike film zãa PVC sesẽ abe dzoxɔxɔ ƒe gɔmeɖoanyi ene kple PVDC ƒe nutsyɔnu si dzi wokpɔna be wòana tsitretsitsi ɖe tsi, ɔksidzin kple ʋeʋẽ lilili ƒe kaka ŋu nanyo ɖe edzi.

PVDC ƒe kpekpeme vovovowo ate ŋu ana mɔxenu ƒe dzidzenu vovovowo. Dɔwɔƒewo ƒe ɖoɖo siwo bɔ ateŋu anye esiwo ade 40, 60, 90 alo 120 g/m2, gake ele be woaɖo kpe eƒe anyinɔnɔ kple tiatia mamlɛtɔ dzi ɣesiaɣi ɖe HSQY ƒe dzesi tɔxɛa nu.

Mele be woatia nutsyɔnu ƒe kpekpeme si lolo wu le wo ɖokui si o. PVDC ƒe agbɔsɔsɔ si wobia nɔ te ɖe atike ƒe seselelãme, do ƒe nɔnɔme, wɔwɔme ƒe nɔnɔmetata, yame ƒe nɔnɔme, agbenɔƒe ƒe taɖodzinu kple liƒo ŋutɔŋutɔ ŋuti nyatakakawo dzi.

Atikewɔwɔ ƒe PVC Film ƒe Dɔwɔwɔ

• Tablet Blister Packs: Nubablɛ si ƒe agbɔsɔsɔme le ɖeka na atikekui siwo wotsɔ ƒo ƒu siwo dze.

• Hard Capsule Blisters: Nubablɛ si me kɔ alo mɔxenu na capsule siwo ƒe go sesẽ.

• Soft Capsule Blisters: Film ƒe wɔwɔme tiatia aɖewo le woƒe ɖekawɔwɔ kple woƒe liƒo me dzodzro vɔ megbe.

• Nutraceutical Packaging: Vitamin, nuɖuɖu kpeɖeŋutɔ kple esiwo do ƒome kplii unit-dose products.

• Lãwo ƒe Atikewo: Atikekui kple atikekui siwo dze na lãwo ƒe atikewɔwɔ ƒe ɖoɖowo.

• Dɔdamɔnu Dodokpɔwo: Kpɔɖeŋu-agbɔsɔsɔme kple dɔdamɔnu-nusɔsrɔ̃ ƒe ʋuʋudedi ƒe nɔnɔme tiatia.

• Suppository Packaging: Etɔxɛ PVC /PE alo multilayer xɔtuɖoɖowo le adzɔnuwo ƒe nudidiwo nu.

• Lãmesẽnyawo Gbɔkpɔkpɔ ƒe Nubablɛ Tiatia: Lãmesẽnyawo gbɔ kpɔkpɔ kple dɔlélewo didi ƒe akpa siwo me dɔlékui mele o le dzeside si ku ɖe dɔbiagbalẽvi koŋ ŋu vɔ megbe.

Mele be woaɖɔ atikewɔmɔnu si wozãna ɖaa PVC blister film le eɖokui si be enye mɔxenu si me dɔlékui mele o. Atikewɔnuwo ƒe babla siwo me dɔlékui mele o hiã nu tɔxɛ aɖewo, nutrenu-ɖoɖo, dɔlékuiwutikewo zazã kple nugbagbevi suewo ƒe mɔxenu ƒe kpeɖodzi.

Atikewɔwɔ PVC Film si me kɔ, Blu, Amber kple Opaque

Woateŋu ana HSQY atike PVC filmwo le dzedzeme vovovowo me le atikewo ƒe dzesidede kple woƒe babla-aɖaŋu ƒe nudidiwo nu.

Amadede si wokpɔna ɖeɖe meɖoa kpe kekeli takpɔkpɔ si sɔ dzi o. Atike siwo sea kekeli gɔme hiã spectral-transmission ƒe nudidi siwo woɖe fia kple liƒo ƒe dodokpɔ si akpe ɖe eŋu.

Atikewɔwɔ ƒe Nyonyome Dzi Kpɔkpɔ PVC Blister Film

Atikewo ƒe gbãtɔ ƒe bablawo bia be woakpɔ nɔnɔme siwo dzi wokpɔna, ewɔwɔ si woŋlɔ ɖi kple batch traceability. Dodokpɔ nɔ te ɖe nusiwo wotsɔ wɔe ƒe wɔwɔme kple asisiwo ƒe nɔnɔme si dzi wolɔ̃ ɖo dzi.

Atikewo Ŋuti Ðoɖowɔwɔ Kple Woƒe Nyonyome Ŋuti Nuŋlɔɖiwo

Ðaseɖigbalẽ ɖeka aɖeke meli si ana PVC blister film ɖeka nasɔ na atike ɖesiaɖe kple asi ɖesiaɖe le eɖokui si o. Nuŋlɔɖi siwo hiã la nɔ te ɖe afisi woɖo tae ƒe ʋɔnudrɔ̃ƒe, agbɔsɔsɔme si woazã ƒe agbalẽvi, atike ƒe agbalẽvi kple nusiwo woatsɔ ablae ƒe nɔnɔme dzi.

Le HSQY ƒe dzeside si wotia kple asisiwo ƒe nudidiwo nu la, nuŋlɔɖiwo ate ŋu anye:

• Ðaseɖigbalẽ si nye Kukuɖenuŋu na nuwɔwɔ ƒe hatsotsowo

• Mɔ̃ɖaŋu Ŋuti Nyatakakagbalẽvi

• Nusiwo wotsɔ wɔe ŋuti nyatakakawo

• Gbeƒãɖeɖe be wowɔ ɖe ɖoɖoa dzi le afisi wòsɔ le

• Atikewo ŋuti dodokpɔ ŋuti nyatakaka siwo sɔ

• Ʋuʋu, nusiwo woate ŋu aɖe alo atikewo ƒe dedienɔnɔ ŋuti nyatakakawo le afisi wòsɔ le

• WVTR, OTR alo coating-weight data na mɔxenu xɔtuɖoɖowo

• Adzɔnuwo wɔwɔ-teƒe kple nyonyome-dzikpɔkpɔ ŋuti nyatakakawo

• Batch traceability nyatakakawo

• Tɔtrɔwo dzi ɖuɖu ƒe kpekpeɖeŋu le asitsatsa ƒe nubabla nu

• Sedziwɔwɔ ƒe kpeɖodzigbalẽ siwo le adzɔnuwo ƒe dzeside kple asitsatsa ƒe nudidiwo nu

Ele be nuƒlelawo nade dzesi asi si me woayi kple dossier ƒe kpekpeɖeŋu si hiã hafi awɔ nudɔdɔ. Nyatakaka gbadzawo abe ISO, REACH, RoHS alo SGS nuŋlɔɖiwo le wo ɖokui si mexɔ ɖe atikewo ƒe sɔsɔ, liƒo kple gbãtɔ-nubablɛ ƒe dzeside teƒe o.

Atikewɔwɔ ƒe Blister Film ƒe Kuxi Siwo Bɔ

Atikewɔwɔ PVC Film Roll ƒe Nudidiwo

Blister lines siwo wowɔna le wo ɖokui si hiã nu geɖe wu woƒe titrime si sɔ. Roll geometry kple winding quality kpɔa ŋusẽ ɖe ewɔwɔ nyuie dzi tẽ.

• Slit ƒe kekeme kple kekeme ƒe mɔɖeɖe ɖe nu ŋu pɛpɛpɛ

• Core ememe didime

• Nya veviwo

• Maximum agbalẽ xatsaxatsa gota didime

• Agbalẽxatsaxatsa ƒe kpekpeme si sɔ gbɔ wu

• Mɔfiame si le tsatsam

• Coated-axadzi orientation na multilayer filmwo

• Roll sesẽ kple winding tension

• Splices ƒe xexlẽme si dzi woda asi ɖo wu

• Roll kple batch-label ƒe nudidiwo

Atikewo ƒe PVC Agbalẽxatsaxatsawo Dzadzraɖo Kple Wo Ŋudɔwɔwɔ

• Na agbalẽ xatsaxatsawo nanɔ woƒe ametakpɔnu gbãtɔ me vaseɖe esime wòahiã be woawɔ.

• Dzrae ɖo ɖe nudzraɖoƒe si le dzadzɛ, si me tsi mele o eye wokpɔa edzi.

• Takpɔ film ta tso ɣe ƒe keklẽ tẽ, tsidzadza, ke kple ʋeʋẽ sesẽwo me.

• Ƒo asa na kadodo kple atike siwo gblẽa nu alo ɖiƒoƒotsoƒewo.

• Do alɔ agbalẽ xatsaxatsawo le woƒe babla ƒe nɔnɔme nu be woaƒo asa na nugbɔ ƒe gbegblẽ.

• Mègahe agbalẽ xatsaxatsawo to anyigba alo atsɔ nugbɔ siwo womelé ɖe te o atsɔ film la awɔ dɔe o.

• Wɔ ɖe nudzraɖoƒe ƒe agbenɔƒe kple nɔnɔme nyui ƒe aɖaŋuɖoɖo siwo dzi wolɔ̃ ɖo dzi na klass si nètia.

Nubablɛwo Kple Nusiwo Wotsɔna Ðea Duta

Zi geɖe la, wotsɔa atike PVC film le agbalẽ xatsaxatsa siwo wobla nyuie me kple ametakpɔnu siwo sɔ na dɔwɔƒewo ƒe dɔwɔwɔ kple dukɔwo dome agbalẽɖoɖoɖa.

• Ametakpɔnu PE film babla

• Kraft-pepa takpɔkpɔ

• Ametakpɔnu si wotsɔa agbalẽ xatsaxatsa ƒoa nui

• Batch kple roll ƒe dzesidede

• Export pallet packing

• Wotrɔ asi le agbalẽ xatsaxatsa ƒe kpekpeme ŋu

• Pallet ƒe didime siwo wowɔ ɖe ɖoɖo nu

• Ðoɖowɔwɔ ɖe nugoewo ƒe agbatsɔtsɔ ŋu

Nukatae Nàtia HSQY be wòanye Wò Atikewɔwɔ PVC Film Dɔwɔƒe?

• Atikewɔwɔ ƒe Dɔwɔɖoɖo Geɖewo: Rigid PVC , PVC / PVDC , PVC /PE kple PVC / PVDC /PE tiatia.

• Film ƒe Titrime si Wotrɔ Asi Le: Woate ŋu atsɔ atikewo ƒe wɔwɔme-film ƒe nɔnɔmewo asɔ kple nusiwo wobla ɖe agba me ƒe nudidiwo.

• Custom Slitting: Woate ŋu atsɔ agbalẽ xatsaxatsa ƒe kekeme asɔ kple blister-machine web ƒe nudidiwo.

• Custom Roll Configuration: Woate ŋu aƒo nu tso Core, roll diameter, roll weight kple winding mɔfiame ŋu.

• Mɔxenu Tiatia: Dzɔdzɔme PVC kple PVDC -coated higher-barrier solutions li.

• Amadede ƒe Ŋgɔyiyi: Atike-film tiatia siwo me kɔ, siwo ƒe amadede nye amadede kple esiwo me mekɔ o.

• Kpɔɖeŋu Kple Dodokpɔ-Ŋkɔwo Kpekpeɖeŋu: Woate ŋu ada nusiwo wotsɔ wɔe la kpɔ le asisi la ƒe ʋuʋudedi ƒe fli dzi hafi woada asi ɖe edzi le asitsatsa me.

• Dzesidede Nuŋlɔɖiwo: Woate ŋu ana adzɔnuwo kple hatsotso ƒe nuŋlɔɖiwo le dzeside kple nubabla si dzi woɖo kpee nu.

• B2B Export Supply: Bulk roll kple pallet nana na atikewo ƒe babla asisiwo le xexeame katã.

Nyatakaka Kawoe Wòle Be Woade Wò RFQ Me?

RFQ si me kɔ nyuie na HSQY kafu atikewo ƒe ʋuʋudedi ŋuti nyatakakawo eye wòyɔa wo nyuie wu.

1. Agbɔsɔsɔme si wozãna: atikekui, atikekui, atikekui alo atike bubu

2. Atikewo ƒe seselelãme ɖe tsi, ɔksidzin kple kekeli ŋu

3. Fifia ƒe nubablɛ-film ƒe wɔwɔme

4. PVC ƒe titrime

5. PVDC nutsyɔnu ƒe kpekpeme le afisi wòsɔ le

6. Film ƒe kekeme kple mɔɖeɖe ɖe nu ŋu

7. Core ememe didime

8. Maximum agbalẽ xatsaxatsa ƒe didime kple agbalẽ xatsaxatsa ƒe kpekpeme

9. Blister-mɔ̃ wɔla kple eƒe kpɔɖeŋu

10. Forming system kple line ƒe duƒuƒu

11. Cavity ƒe didimewo kple ta goglome

12. Blister-kaɖi ƒe ɖoɖo

13. Lidding foil kple dzoxɔxɔ-nutrenu lacquer ƒe nɔnɔme

14. Mɔxenu alo liƒo ƒe taɖodzinu si hiã

15. Amadede kple opacity ƒe nudidiwo

16. Destination ƒe ɖoɖowɔwɔ ƒe asi

17. Mɔ̃ɖaŋu kple ɖoɖowɔɖi ŋuti nuŋlɔɖi siwo hiã

18. Dodokpɔ ƒe agbɔsɔsɔme

19. Asitsatsa ƒe nudɔdɔ ƒe agbɔsɔsɔ kple ƒe sia ƒe ƒe didi

20. Nudidi siwo ku ɖe nu babla kple wo ɖoɖo ɖe amewo ŋu

Nya Siwo Wobiaa Enuenu Tso Atikewɔwɔ PVC Film Ŋu

Nukae nye atike PVC blister film?

Atikewɔwɔ ƒe PVC blister film nye nyatakakadzraɖoƒe sesẽ si wozãna tsɔ wɔa dzoxɔxɔ ƒe dowo na atikekuiwo, atikekuiwo kple atikewɔnu bubu siwo ƒe agbɔsɔsɔme nye unit-dose si dze. Zi geɖe la, wotrea film si wowɔ la nu ɖe ​​atike ƒe nutsyɔnu si sɔ ŋu.

PVC ƒe titrime kae wozãna na atikewo ƒe ʋuʋudedi ƒe bablawo?

Anɔ abe 0.20–0.30 mm ene bɔ ɖe atikewo ƒe ʋuʋudedi sesẽ geɖe PVC zazã me. HSQY ƒe atikewo ƒe film ƒe didime keke ta abe milimeta 0.13 va ɖo milimeta 0.50 ene le wɔwɔme si wotia nu.

Ðe wozãa micron 250 PVC zi geɖe na atikewo ƒe ʋuʋudedi ƒe agbawoa?

Ɛ̃. Anɔ abe 250 micron nye nufiame ƒe titrime si bɔ na atike sesẽwo PVC , gake ele be woatia dzidzenu nyuitɔ le do ƒe nɔnɔme, blister tooling, agbɔsɔsɔme ƒe nɔnɔme kple mɔ̃ ƒe nɔnɔme siwo ŋu woda asi ɖo nu.

Vovototo kae le PVC kple PVC / PVDC dome ?

Plain rigid PVC naa dzoxɔxɔ ƒe nɔnɔme nyui kple eme kɔ gake tsidzadza kple oxygen mɔxenu si nye gɔmedzenuwo vie. PVC / PVDC tsɔ PVDC ƒe nutsyɔnu kpe ɖe eŋu si naa nutome ƒe mɔxenu nyona ɖe edzi esime wòle PVC wɔwɔ ƒe gɔmeɖoanyia dzi kpɔm.

Nukae nye PVC / PVDC /PE atikewɔ film?

PVC / PVDC /PE nye atikewo wɔwɔ-film wɔwɔme si me ƒuƒoƒo geɖe le si ƒoa PVC gɔmeɖoanyi kple mɔxenu kple dɔwɔwɔ ƒe ƒuƒoƒo. Woate ŋu azãe na atike tiatia siwo hiã mɔxenu si wodo ɖe ŋgɔ alo wɔwɔme ƒe dɔwɔwɔ tɔxɛ.

Ðe PVC si le gbadzaa nye atikewɔnu si me mɔxenu gã aɖe lea?

Ao, PVC si sesẽna gbadzaa naa nutome takpɔkpɔ veviwo gake le dzɔdzɔme nu la, mele be woabui be enye nusi xea mɔ na tsi alo oxygen sɔ gbɔ o. Nusiwo ŋu woate ŋu awɔ nuvevii ate ŋu abia be woatsɔ PVDC -si wotu ɖe wo dzi, PCTFE-si wotu ɖe alo aluminium-si wotu ɖe xɔtuɖoɖowo dzi.

Aleke mawɔ atia PVDC ƒe kpekpeme si sɔ?

Ele be woatia PVDC nutsyɔnu le atike ƒe seselelãme, eƒe agbenɔƒe, yame ƒe nɔnɔme, blister geometry, forming draw kple target moisture alo oxygen barrier nu. Ele be dodokpɔ le liƒo ŋu naɖo kpe xɔtuɖoɖo mamlɛtɔ dzi.

Ðe woate ŋu atre atikewɔ PVC film nu ɖe ​​aluminum-gbadzɛ ŋua?

Ɛ̃. Zi geɖe la, wotsɔa dzoxɔxɔ xea mɔ na PVC ʋuʋudedi film sesẽ la ɖe atikewo ƒe aluminum nutsyɔnu ƒe agbalẽvi si me dzoxɔxɔ-nutrenu ƒe aŋɔ si sɔ le la ŋu. Ele be woaɖo kpe foil, lacquer kple nutrenu ƒe nɔnɔmewo tututu dzi ɖekae.

Atikewɔwɔ ƒe PVC film ƒe amadede kawoe li?

Tiatia ate ŋu anye blɔ, ɣi, amber, dzĩ, amadede dzẽ, ɣi kple amadede siwo me kɔ, siwo me kɔ, siwo me kɔ. Ele be amadedewo kple nusiwo me mekɔ o nasɔ na atikewo ƒe bablawo zazã si wotia.

Ðe amber alo amadede PVC kpɔa atike siwo sea kekeli nu ta?

Nusiwo le amadede me alo esiwo me mekɔ o ate ŋu aɖe kekeli ƒe kaka dzi akpɔtɔ, gake amadede si wokpɔna ɖeɖe meɖo kpe kekeli takpɔkpɔ si sɔ dzi o. Ele be woaɖe spektral ƒe dɔwɔwɔ si hiã la gɔme ahaɖo kpe edzi to dodokpɔ kple liƒo ŋuti numekuku siwo sɔ me.

Ðe atike PVC film te ŋu nɔa te ɖe ɖeviwo nua?

PVC film wɔwɔ ɖeɖe dzaa menye nusi te ŋu nɔa te ɖe ɖeviwo nu o. Ðeviwo ƒe tsitretsitsi nɔ te ɖe ʋuʋudedi ƒe akpata ƒe nɔnɔme bliboa, nutsyɔnu ƒe wɔwɔme, ʋuʋu ƒe mɔnu kple agbalẽvi si wowu dodokpɔ si sɔ dzi.

Ðe atikewo ƒe PVC blister film nye dɔlékuiwutikea?

Wometsɔa atikewo ƒe ʋuʋudedi film si wozãna ɖaa la naa ame le eɖokui si abe esi me dɔlékui mele o ene o. Dɔlékuiwutikewo ƒe bablawo zazã bia be woawɔ nu kple nubablɛ ƒe ɖoɖo si ŋu wotrɔ asi le koŋ eye woda asi ɖe edzi na dɔlékuiwutike kple dɔlékuiwutike-mɔxenu ƒe nudidi siwo woɖo be woawɔ.

Nukae nana be ʋuʋudedi ƒe do medzɔna nyuie o?

Nusiwo ate ŋu atso eme dometɔ aɖewoe nye dzoxɔxɔ si mesɔ o, dzoxɔxɔ si mesɔ o, ya si me ya mele o alo ya si woƒo ɖe eme o, doa ƒe goglome si gbɔ eme, aŋɔ ƒe yadoƒe siwo xe, film ƒe titrime si mesɔ o, web ƒe tete si meli ke o alo forming-film ƒe grade si mesɔ o.

Aleke wodoa atike PVC film kpɔna?

Le alesi wogblɔe nu la, dodokpɔwo ate ŋu anye nusiwo wotsɔ wɔe ƒe dzedzeme, eƒe titrime, kekeme, nukpɔkpɔ ƒe nyonyome, amadede, afu, dzoxɔxɔ ƒe ɖeɖeɖa, nuwɔwɔ ƒe dɔwɔwɔ, mɔ̃ɖaŋununya ƒe nɔnɔmewo, mɔxenu ƒe kaka, PVDC nutsyɔnu ƒe kpekpeme, nutrenu ƒe sɔsɔ, ʋuʋu kple atike-dedienɔnɔ ƒe nudidi bubuwo.

Ðe ISO 9001 ɖo kpe edzi be PVC film sɔ na atikewo ƒe bablawoa?

Ao, ISO 9001 ku ɖe nyonyome-dzikpɔkpɔ ƒe ɖoɖowo ŋu. Atikewo ƒe gbãtɔ-nubablɛ ƒe nyonyo hã bia be woakpɔ nusiwo wotsɔ wɔe ƒe nɔnɔmewo, dedienɔnɔ kple woƒe sɔsɔ ŋuti nyatakakawo, dɔwɔwɔ dodokpɔ, liƒo ƒe dodokpɔ kple teƒe si woayi-asi ŋuti nuŋlɔɖiwo.

Ðe woate ŋu atrɔ asi le atikewo ƒe ʋuʋudedi film ŋua?

Ɛ̃. HSQY ate ŋu aƒo nu tso film ƒe wɔwɔme si wowɔ ɖe ɖoɖo nu, eƒe titrime, PVDC nutsyɔnu, slit ƒe kekeme, agbalẽ xatsaxatsa ƒe didime, nuto, winding mɔfiame, amadede kple nubablɛwo ŋu le mɔ̃ɖaŋununya ƒe nudidiwo kple nudɔdɔ ƒe agbɔsɔsɔ nu.

Nukae nye MOQ na atike PVC film?

HSQY ƒe atike film ƒe nɔnɔme geɖewo ƒe MOQ si bɔ si ade 1000–2000 kg. Titrime siwo wowɔ ɖe ɖoɖo nu, amadede tɔxɛwo, PVDC nutsyɔnu ƒe kpekpemewo kple nuŋlɔɖi ƒe nudidiwo ateŋu ana MOQ bubu nado.

Ðe mate ŋu abia be woana dodokpɔ ƒe agbalẽvi hafi abia nu gbogbo aɖea?

Woate ŋu adzro dodokpɔ me nyawo me hena dɔ siwo sɔ. Ele be atikeƒlelawo nada film yeye kpɔ le blister mɔ̃ ŋutɔŋutɔ dzi hena ewɔwɔ, kplɔkplɔ, nutrenu, ƒoƒo kple eƒe akpa si wowu enu ƒe dɔwɔwɔ hafi asitsatsa ƒe mɔɖeɖe.

Nyatakaka kawoe hiã na atikewɔnyawo ƒe PVC film ƒe nyayɔyɔ?

Na film ƒe wɔwɔme, eƒe titrime, kekeme, nuto, agbalẽ xatsaxatsa ƒe didime, PVDC nusi wotsɔ blae ƒe kpekpeme ne esɔ, amadede, blister-machine model, do ƒe goglome, lidding foil, sedziwɔwɔ ƒe asi, nuŋlɔɖi siwo hiã, dodokpɔ ƒe agbɔsɔsɔme kple ƒe sia ƒe ƒe didi si wobu.

Bia Atikewɔwɔ PVC Blister Film Kpɔɖeŋuwo Kple Asixɔxɔ

HSQY naa atikewɔnuwo wɔwɔ film siwo sesẽ PVC kple esiwo ƒe mɔxenu lolo wu na atikewo ƒe bablawɔlawo, nubablawɔlawo, atikewɔlawo, atikewo mamalawo kple dɔwɔƒewo ƒe tɔtrɔlawo le xexeame katã.

Eɖanye 250 micron rigid PVC , PVC / PVDC alo atikewɔɖoɖo si me wowɔa akpa vovovowo le zãm fifia o, HSQY ateŋu ato wò mɔ̃ɖaŋununya ƒe nɔnɔmewo me eye wòana nusiwo sɔ ƒe tiatia hena dodokpɔ.

Ðo wò fifi nɔnɔme, blister-mɔ̃ ŋuti nyatakakawo kple ƒe sia ƒe ƒe agbɔsɔsɔme ɖe mí be míabia mɔ̃ɖaŋu ŋuti nyatakakawo, dodokpɔ ŋuti nyatakakawo, nubablɛ ŋuti nyatakakawo kple asixɔxɔ gbogbotɔ.