HSQY Famasiutik Gred Rigid PVC Blister Film

Famasiutik Gred Rigid PVC Blister Film

HSQY famasitik gred rigid PVC film na fכ tεmכfכm blista pak fכ tablεt, kapsul εn כda sכlid-dos prodakt dεm. di film de gi di rigid fכm wεb we dεn yuz fכ mek blista kεviti bifo dεn ful εn sial wit wan kompitibl fכm liding mεtirial.

Di kɔrɛnt HSQY-210616 prodak rɛnj kɔba nominal tiknɛs frɔm 0.12mm to 0.30mm wit klia, wayt ɛn kɔstɔmayz kɔlɔ opshɔn dɛn. Rol dimɛnshɔn kin kɔstɔmayz akɔdin to di blista-pak mashin, tul layout ɛn aprɔv bay spɛsifikɛshɔn.

Plεn rigid PVC na jεnarali sεlekt usay dεn nid fכ rilibul tεmכfכm, vishכnal prodak inspεkshכn, kכnsistεnt wεb hεndlin εn ikonomik blista prodakshכn. Fɔ mɛrɛsin dɛn we nid bɔku bɔku mɔstɔ ɔ ɔksijɛn barɛri, dɛn fɔ evalyu wan strɔkchɔ we gɛt ay barɛri lɛk PVC / PVDC , PVC /PE/ PVDC ɔ ɔda kwalifay famasitik blista matirial sɛpret wan.

       Rikwest Famasiutik PVC Film Kot    

Famasiutik PVC Blister Film Vidio

Wetin Na Famasiutik PVC Blister Film?

Famasiutik PVC blista film na rigid tεmכfכm mεtirial we dεn de yuz as di kεviti-fכm wεb insay blista pakej dεm. we dεn de pak, dεn de hεt di PVC wεb, fכm insay kכva, fulכp wit tablεt כ kapsul dεm εn afta dat dεn de sial am to wan kכmpatibl lid fכyl.

Fɔ famasitik kɔnvɔta, film sɛlɛkshɔn nɔ de bays pan tiknes nɔmɔ. Impɔtant tin dɛn na fɔm bihayvya, dimɛnshɔnal stebiliti, shrink, sɔfayz kwaliti, rol flatnɛs, kɔlɔ kɔnsistɛns, kɔr saiz, wayndin kwaliti ɛn kɔmpitibliti wit di blista mashin ɛn lidding sistɛm.

Di fainal matirial spɛsifikɛshɔn fɔ apruv fɔ di ɛksaktɔl mɛrɛsin, blista dizayn, pak layn, dɛstineshɔn makɛt ɛn rigyuletɔri rikwaymɛnt bifo kɔmɛshɔnal prodakshɔn.

Famasiutik PVC Rigid Film Imej dɛn

Famasiutik PVC Film Spɛsifikeshɔn dɛn

Di pej bin gɛt wan jenɛral-pɔpɔs PVC tebul bifo we kɔba 0.07–6mm ɛn nɔ-famasiutik aplikeshɔn dɛn. fכ dis famasitik prodak, di kכrant prodak-lεvεl infכmeshכn na 0.12–0.30mm. Faynal tolerans ɛn rol spɛsifikɛshɔn dɛn fɔ kɔnfyus insay di apruv tɛknikal spɛsifikɛshɔn.

Ki Rikwaymɛnt fɔ Famasiutik PVC Blister Film

Kɔnsistɛns Tɛmofɔmin

Famasiutik PVC film fכ fכm kכnsistεnt blista kεviti dεm כnda validet hεt εn fכm kכndishכn dεm. Fɔm pefɔmɛns dipen pan fim gred, tik, kaviti jɔyometri, hita dizayn, layn spid ɛn fɔm prɛshɔn.

Tiknɛs Yunifɔmiti

di gej vεryushכn kin afekt di fכmeshכn na di kaviti, di wεb tεnshכn, di silin εn di fayn blista kכnsistεns. So, dɛn fɔ put nominal tik ɛn tolɛreshɔn insay di spɛsifikɛshɔn we dɛn dɔn gri fɔ bay.

Optik Klariti

Klia famasitik PVC de alaw di pak doz fכm fכ de fכ inspekshכn εn idεntifikεshכn. Haz, transparency ɛn surface defects fɔ kɔntrol akɔdin to di apruv prodak standad.

Dimɛnshɔnal Stebiliti

Stebul wɛb dimɛnshɔn dɛn de ɛp fɔ mek dɛn kɔntinyu fɔ rɛjista, di kaviti pozishɔn, silin akkuracy ɛn rili ɔpreshɔn pan famasitik blista-pak ikwipmɛnt.

Di Shrinkage we dɛn kin kɔntrol

If yu shrinkage pasmak we yu de ɔt, i kin afɛkt di kaviti jɔyometri ɛn di rɛjista. di tεmral bihayvya fכ validet na di aktual blista-layn fכm tεmprachכ εn spid.

Klin Surface ɛn Rol Kwaliti

Famasiutik kɔnvɔta dɛn fɔ difayn akseptabl limit fɔ kɔntaminɛshɔn, blak spat, jel, skrach, bɔbul, blɔk, ed damej, kɔl, tɛliskɔp ɛn ɔda dɛfɛkt dɛn we kin afɛkt di pak-layn ɔpreshɔn ɔ finish blista apinɛns.

Famasiutik PVC Blista Pak Prɔses

Plɛn PVC vs. Ay-Baria Famasiutik Blista Films

Plεn rigid PVC na ikonomik tεmכfכm mεtirial, bכt i nכ de gi di sem mכsichכ כ כksijεn protεkshכn lεk dεdikεt hεy-baria blista strכkchכ dεm. So, di fim sɛlɛkshɔn fɔ bigin wit di stebiliti rikwaymɛnt dɛn fɔ di famasitik prodak.

Baria strɔkchɔ fɔ pik frɔm famasi stebiliti data pas fɔ tek am se di barɛri we ay pas ɔl na ɔtomɛtik wan di bɛst ɔ di ikɔnomik sɔlvishɔn.

Homopolimer vs. Kopolimer PVC fɔ Blister Fɔm

HSQY fɔ kɔnfɔm di ɛksaktɔl PVC fɔmyulashɔn we dɛn gi fɔ di prɔjek pas fɔ diskrayb ɔl di famasitik PVC as wan yunivasal gred.

Famasiutik PVC Blista Film Aplikeshɔn dɛn

Tablɛt Blista Pakɛj

Rigid PVC film dεn kin yus am as di tεmכfכm kεviti wεb fכ yunit-dכz tablεt blista pak usay di apruv mεdisin stεbiliti profayl de alaw fכ pak plein PVC .

Kapsul Blister Pak we dɛn kin yuz

כltεm kכpsul dεm nid dip kכva pas sכm sכm tablεt dεm, so fכ fכm dip, film gεj, kaviti jכmetri εn PVC gred fכ evaluate tכgeda.

OTC ɛn Nyutrasiutik Blista dɛn

Dɛn kin ebul fɔ evaluate fayn fayn famasitik rigid PVC gred dɛn bak fɔ ɔva-di-kɔnta prodak, vaytamɛn ɛn nyutrasiutik sɔlid-dos pak akɔdin to di prɔdak in stebiliti ɛn di tin dɛn we di makit nid.

Ɔrijinal Aplikeshɔn Pikchɔ dɛn

Dɛn kip di pikchɔ dɛn we de dɔŋ ya frɔm di fɔs pej. Famasiutik blista pak na di praymar SEO ɛn prodakt fɔs fɔ dis pej; ɔda PVC aplikeshɔn dɛn fɔ trit as rilayt matirial kapabiliti pas di kɔr famasitik prodak pozishɔn.

Aw fɔ Pik Famasiutik PVC Blister Film

1. Difayn di Doz Fɔm

Spɛsifik if di paket gɛt tablɛt, kapsul, nyutrasiutik ɔ ɔda sɔlid-dos prodak, togɛda wit di dimɛnshɔn dɛn fɔ di doz fɔm.

2. Kɔnfɔm di Rikwayd Baria Lɛvɛl

Yuz famasi stebiliti data fɔ no if plain PVC de gi adekwayt protɛkshɔn ɔ if PVDC , PCTFE, kol-fɔm aluminiɔm ɔ ɔda ay-baria strɔkchɔ nid fɔ de.

3. Spɛsifik di Film Tiknɛs

Di kɔrɛnt HSQY-210616 prodakt rɛnj de list na 0.12–0.30mm. Selekt gej akɔdin to di kaviti dip, wɛb rigiditi, fɔm kɔndishɔn ɛn pak-mashin rikwaymɛnt.

4. Gi di Blister Cavity Drawing

Kaviti lεngth, wit, dip, kכna rayus εn dro rεshכn de afekt tεmכfכm bihayv εn dεn fכ tink bכt am we dεn de sεlekt mεtirial.

5. Gi di Blister Machine Ditiɛl dɛn

Gi di mashin manifakta, mɔdel, rotary ɔ flat-bed fɔm sistɛm, wɛb wit, kɔr rikwaymɛnt, layn spid ɛn kɔrɛnt ɔpreshɔn kɔndishɔn.

6. Kɔnfɔm Liding Fɔyl Kɔmpatibiliti

di PVC fכm wεb fכ wok wit di fכm we dεn sεlekt fכm lid fכyl εn hεt-sil lak. Faynal siling temperechur, prɛshɔn ɛn dwɛl tɛm fɔ validet na di prodakshɔn layn.

7. Difayn di Kɔlɔ ɛn Layt-Protɛkshɔn Rikwaymɛnt dɛn

Klia ɔ kala PVC fɔ pik akɔdin to di prɔdak visibiliti, branding ɛn layt-protɛkshɔn rikwaymɛnt. Nɔ klem UV protɛkshɔn pas dɛn dɔn fɔmulayt di rayt gred we dɛn gi yu ɛn rayt am fɔ da wok de.

8. Kɔnfɛm Famasitik Dokumɛnt

Rikwest kɔrɛnt tɛknikal, kwaliti ɛn rigyuletɔri dɔkyumentri we spɛshal kɔba di ɛksaktɔ saplai PVC gred ɛn manufakchurin sayt we dɛn nid fɔ di dɛstineshɔn makit.

Blister Machine ɛn Rol Spɛsifikeshɔn

Di rol kɔnfigyushɔn fɔ mach to di famasitik blista mashin pas fɔ ɔda am nɔmɔ bay di tik we di fim tik.

Kwaliti-Kɔntrol Paramita dɛn fɔ Kɔnfɔm

• Tiknes: Nominal gej ɛn manufakchurin tolɛreshɔn.

• Wid: Slit wit ɛn alaw fɔ tolɛreshɔn.

• Density: Konfam spesifikeshɔn fɔ di ɛksaktɔl fɔmyulashɔn.

• Thermal Shrinkage: Evaluate ɔnda di tɛmpracha ɛn tɛm kɔndishɔn we dɛn gri pan.

• Fɔmabiliti: Validɛt kaviti fɔmɛshɔn pan di mashin ɛn tul we yu want.

• Klari ɛn Haz: Kɔntrol di we aw pɔsin de si fɔ mek i gɛt klia famasi gred.

• Surface Defects: Difayn limit fɔ blak spat, jel, skrat, layn, bɔbul ɛn kɔntaminɛshɔn.

• Flatness ɛn Curl: Impɔtant fɔ wɛb trakin ɛn blista-mashin stebiliti.

• Blɔk ɛn Slip: Afɛkt unwind ɛn ay-spid prɔsesin.

• Kɔlɔ: Yuz wan standad we dɛn gri fɔ fɔ kala famasi PVC .

• Rol Kwaliti: Inspek di wayndin, ed alaynɛshɔn, jɔyn, tɛliskɔp ɛn kɔr kɔndishɔn.

• Traceability: Batch identification ɛn rol lɛbl dɛn fɔ mach di kwaliti dɔkyumentri we dɛn gri pan.

Teknik Data ɛn Ɔrijinal PDF Dokumɛnt dɛn

Di ɔrijinal pej gɛt dɛn PVC tɛknikal dɔkyumɛnt dɛn ya. Dɛn fayl nem dɛn de sho jenɛral PVC sheet matirial ɔ fim infɔmeshɔn, so di wan dɛn we de bay famasi fɔ aks fɔ kɔrɛnt prodak-spɛsifi k dɔkyumentri fɔ HSQY-210616 bifo dɛn kwalifay.

           Transparent PVC Sheet we yu de yuz Data Shit.pdf    

           PVC Klia Film Data Shit.pdf    

           PVC Sheet we de na di wɔl Tɛst Ripɔt.pdf    

Famasiutik Kwaliti ɛn Kɔmplians Dokumɛnt

Famasitik pak kwalifayeshɔn fɔ bi bays pan di kɔrɛnt dɔkyumɛnt dɛn we kɔba di ɛksaktɔl fim gred we dɛn gi ɛn di say we dɛn mek am pas fɔ abop pan wan jenɛral sɛtifiket imej nɔmɔ.

Dipen pan di dɛstineshɔn makit ɛn di kɔstɔma kwaliti sistɛm, di wan dɛn we de bay kin nid fɔ aks fɔ di aplikebul tɛknikal data sheet matirial , sɛtifiket fɔ analisis, matirial diklareshɔn, famasi ɔ fud-kɔntakt kɔmplians dɔkyumentri, rɛsɛdyual-monomer infɔmeshɔn, maykreshɔn data, dimɛnshɔnal inspekshɔn rizɔlt ɛn ɔda kwaliti dɔkyumɛnt dɛn we dɛn gri.

Rigyuletɔri ɛn famakopi klem dɛn fɔ jɔs pablish we di kɔrɛnt sɔpɔtin dɔkyumentri de fɔ di ɛksaktɔl prɔdak we dɛn gi.

Infɔmeshɔn we dɛn nid fɔ mek wan Famasiutik PVC Kɔt

Fɔ gɛt kɔrɛkt kot ɛn fayn ɛgzampul, gi bɔku pan dɛn tin ya as yu ebul:

• Tablɛt, kapsul ɔ ɔda doz fɔm

• Rikwayd PVC tiknes

• Rikwayd slit wit ɛn wit tolɛreshɔn

• Klia, wayt ɔ kɔlɔ we dɛn nid

• Blister cavity drawing ɛn fɔm dip

• Blister mashin manifakta ɛn mɔdel

• Rotary ɔ flat-bed fɔm sistɛm

• Kɔrɛnt fɔm tɛmpracha ɛn layn spid

• Kor insay dayamita

• Maksimal rol ausayd dayamita

• Maksimal wet we di rol gɛt

• Lidding foil ɛn ɔt-sil lak spesifikeshɔn

• Rikwayd barɛri lɛvɛl

• Famasiutik ɔ rigyuletɔri dɔkyumentri we dɛn nid

• Destineshɔn makit

• Trayal kwantiti ɛn ɛni ia kɔnsɔmshɔn

       Get Famasiutik PVC Film Prays    

Pak ɛn Delivri

Sampul Pak: Di pej we de naw de sho A4-sayz sampul fim dɛn we dɛn pak insay PP bag ɔ bɔks.

Film Rol Packing: Di infɔmeshɔn we de naw de list lɛk 30kg pan wan rol ɔ kɔstɔmayz rol wet, we dɛn protɛkt wit PE film ɔ kraft pepa.

Kɔr: Di kɔrɛnt pak spɛsifikɛshɔn de list wan 76mm insay kɔr dayamita. Konfam di rikwayd kor spesifikeshɔn wit di blista-mashin unwind sistem.

Palet Palet: Infכmeshכn we de naw de list lεk 500–2000kg pan wan plai wud palet dipכnt pan rol kכnfigureshכn εn transpכt rikwaymεnt.

Kɔntena Lod: Di pej we de naw de rifer to lɛk 20 tan pan ɛni kɔntena. Faynal lod kwantiti dipen pan rol dimɛnshɔn, palet kɔnfigyushɔn ɛn kɔntena wet limit.

Dilivri Tɛm: EXW, FOB, CNF ɛn DDU na di opshɔn dɛn we dɛn dɔn list naw.

Rifrɛns Lid Taym: Di pej we de naw de list lɛk 7–15 dez fɔ ɔda tin dɛn we de insay di prodakshɔn rɛnj we dɛn dɔn tɔk bɔt, we de ɔnda di matirial spɛsifikɛshɔn, kɔlɔ, kwantiti ɛn prodakshɔn scheduling.

HSQY Intanɛshɔnal Ɛgzibishin dɛn

HSQY de tek pat pan intanashɔnal plastic ɛn pak ɛgzibishin fɔ mit famasi pak kɔnvɔta, plastic distribyushɔn ɛn ɔda industrial B2B kɔstɔma dɛn.

FAQ Bɔt Famasiutik PVC Blister Film

Wetin na famasi gred rigid PVC film?

na rigid thermoforming film we dεn de yuz as di cavity-forming wεb insay fכmasyutik blista pak. di PVC de hεt, fכm, fulכp wit tablεt כ kapsul εn sial wit wan kompitibl lid mεtirial.

Us tiknes dɛm fɔ famasitik PVC film HSQY de saplae?

Di HSQY-210616 prodak list we de naw de spɛsifa wan famasitik PVC tiknɛs rɛnj we de frɔm 0.12mm to 0.30mm. Yu fɔ kɔnfɔm di rayt gej ɛn tolɛreshɔn bifo yu ɔda.

Wetin mek di ol pej bin sho 0.07mm to 6mm?

Dat rεnj de pan di brayt rigid PVC sheet matirial kapabiliti we dεn sho na di כrijinal jεnarכl-pכpכz tεbul. Di kɔrɛnt famasitik prodakt spɛsifikɛshɔn we de ɔp dis prodak pej na 0.12mm to 0.30mm ɛn dɛn fɔ yuz am fɔ famasitik blista inkyɔri.

Plɛn PVC fit fɔ ɛvri famasi prodak?

PVC Pakɛj matirial fɔ pik yuz di drɔg in stebiliti data ɛn di shelf layf we dɛn nid.

Wetin na di difrɛns bitwin PVC ɛn PVC / PVDC blista film?

Plɛn PVC de gi di thermoformable bays ɛn standad barɛri pefɔmɛns. PVC / PVDC ad wan PVDC barεri layt fכ gi bכku rεsistεns to mכsichכ εn כksijεn fכ mכr sεnsitiv fכmasyutik prodakt dεm.

Wetin na di difrɛns bitwin PVC / PVDC ɛn PVC /PE/ PVDC ?

PVC / PVDC na tipikli wan kɔt ɔ dupleks barɛri strɔkchɔ. PVC /PE/ PVDC gɛt ɔda PE intamɛdiet layt ɛn na sɛpret mɔltilayer pak matirial. Dɛn fɔ pik di rayt strɔkchɔ akɔdin to di fɔm ɛn barɛri rikwaymɛnt dɛn.

Ustɛm dɛn fɔ tink bɔt PVC /PCTFE ɔ Aclar-type blister film?

hεy-mכsichכ-baria laminεt strכkchכ dεm kin kכnsidrεd we fכmasyutik stεbiliti stכdi dεm sho se plein PVC כ kכvεshכnal PVDC strכkchכ dεm nכ de gi inof protεkshכn.

Yu tink se famasitik PVC fim kin gɛt kɔlɔ?

Yɛs. Di HSQY prodak list we de naw inklud klia, wayt, rɛd, grɛn ɛn yɔlɔ, wit ɔda kɔstɔmayt kɔlɔ dɛn we de ɔnda fɔmyulashɔn, kwantiti ɛn aprɔval.

Yu tink se PVC we gɛt kɔlɔ kin protɛkt mɛrɛsin dɛn we gɛt layt?

Nɔ fɔ trit di kɔlɔ nɔmɔ as pruf fɔ protɛkt layt. Usay dɛn nid UV ɔ visible-light protɛkshɔn, di ɛksaktɔ fɔmyulashɔn ɛn transmishɔn pefɔmɛns fɔ validet agens di mɛrɛsin in stebiliti rikwaymɛnt dɛn.

HSQY kin kɔstɔmayz di rol wit?

Yɛs. Rol width kin kɔstɔmayz akɔdin to di blista mashin ɛn tul. Gi di slit wit ɛn tolɛreshɔn we yu nid we yu de aks fɔ kot.

Us kɔr dayamita de?

Di kɔrɛnt ɔrijinal pak infɔmeshɔn de list wan 76mm insay kɔr. Kɔnfɛm di ɛksaktɔl unwind rikwaymɛnt fɔ di blista mashin bifo yu mek ɔda.

Dis PVC film kin ron pan famasi blista mashin?

wan kompitibul famasitik PVC gred kin proses pan suitable thermoforming blister ekwipment afta layn valideshכn. Mashin tayp, hita dizayn, fɔm tɛmpracha, kaviti dip, layn spid ɛn wɛb tɛnsiɔn ɔl de inflɔws pefɔmɛns.

Yu tink se famasitik PVC kin sial to aluminiɔm blista fɔyl?

Famasiutik PVC na tin we dɛn kin yuz wit aluminiɔm push-thru lid fɔyl we de yuz kɔmpatibl ɔt-sil kɔtin. Di ekzak foyl, lak ɛn silin kɔndishɔn dɛn fɔ validet wit di PVC we dɛn gi.

Us difrɛns dɛn fɔ kɔntrol na famasitik PVC fim?

Di wan dɛn we de bay fɔ mek limit fɔ difrɛns pan tik, blak spat, jel, fish yay, skrach, bɔbul, kɔntaminɛshɔn, kɔl, blɔk, sɔfays dɛfɛkt, edj damej, jɔyn ɛn rol-waynd kwaliti.

Us dɔkyumɛnt di wan dɛn we de bay famasi fɔ aks fɔ?

Rikwest di kɔrɛnt tɛknikal, inspekshɔn, kwaliti ɛn rigyuletɔri dɔkyumɛnt dɛn we de kɔba di ɛksaktɔl matirial gred ɛn manufakchurin ples we di kɔstɔma in kwaliti sistɛm ɛn di dɛstineshɔn makit nid.

Wetin na di MOQ?

Di HSQY prodak listin we de naw de spɛsifa wan MOQ we na 2000kg. Spɛshal kɔlɔ, wit ɔ fɔmyulashɔn kin nid difrɛn kɔmɛshɔnal kwantiti.

A kin aks fɔ sampul bifo bɔku bɔku prodakshɔn?

Dɛn kin tɔk bɔt sampul ɛvalueshɔn fɔ chɛk aw i de luk, aw i tik, aw i de mek di tɛmmofɔm, aw di kaviti de fɔm, aw di mashin de rɔn ɛn aw fɔ lid di kɔmpitibliti bifo dɛn gri fɔ di lid.

Us infɔmeshɔn dɛn nid fɔ kot?

Gi tik, wit, kɔlɔ, kɔr saiz, rol dayamita, blista mashin, kaviti drɔ, doz fɔm, lid matirial, dɛstineshɔn makit, di dɔkyumentri we dɛn nid ɛn ɛni ia dimand.

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae rigid PVC film ɛn rilat famasitik blista-pakɛt matirial to intanashɔnal famasitik pak kɔnvɔta, distribyushɔn ɛn industrial kɔstɔma dɛn.

HSQY kin sɔpɔt kɔstɔmayz PVC tiknɛs, slit wit, kɔlɔ, rol kɔnfigyushɔn, sampul, pak ɛn ɛkspɔt saplai akɔdin to di aprɔv projɛkt spɛsifikɛshɔn.

Fɔ famasitik projɛkt, gi di blista mashin, kaviti drɔ, mɛrɛsin sɛnsitiviti, rikwayd barɛri lɛvɛl, target makɛt ɛn ɛni ia volyum so di prɔjek kin ebul fɔ evaluate agens wan fayn plein PVC ɔ ay-baria blista-film strɔkchɔ.

       Kontakt HSQY fɔ Famasiutik PVC Film