250mm Farmasi Rigid PVC Blister Film

250mm Famasiutik Rigid PVC Film fɔ Blister Pakɛj

HSQY Plastic Group de saplae famasi rigid PVC film fɔ blista pak manifakta, famasi pak kɔnvɔta ɛn industrial distribyushɔn. Di 250mm film width na rɛfrɛns spɛsifikɛshɔn fɔ bayer dɛn we de sɔs PVC fɔm wɛb fɔ tablɛt, kapsul ɛn ɔda fayn sɔlid-dos pak aplikeshɔn dɛn.

Rigid PVC film dεn de yuz fכ fכm blista kεviti pan kompitibl tεmכfכm ikwipεshכn. afta dat, dεn kin kכmbayn di kכva dεm we fכm wit wan fayn liding mεtirial, lεk aluminiכm fכyl wit wan aprכpriet hεt-sil kכt. Film tiknes, fɔm pefɔmɛns ɛn siling kɔmpatibiliti fɔ pik akɔdin to di pak mashin ɛn aprɔv prodak spesifikeshɔn.

HSQY in famasitik PVC film rɛnj inklud klia ɛn kɔlɔ matirial dɛn. Fɔ dis prodak, di tik we de, 250mm slit wit, rol kɔnfigyushɔn ɛn minim ɔda kwantiti fɔ kɔnfɔm we yu de aks fɔ kot. Baya dɛn we nid PVC/PE lamination ɔ wan ay-baria matirial fɔ no di kɔmplit film strɔkchɔ sɛpret.

Famasitik pak matirial sɛlɛkshɔn nid fɔ verify di aktual film gred, fɔm ɛn silin pefɔmɛns, prodak kɔmpitibliti ɛn aplikebul kwaliti dɔkyumentri bifo kɔmɛshɔnal yuz.

Farmasi PVC Pakej Film Vidio

Wetin Na 250mm Famasiutik PVC Blista Film?

250mm famasitik PVC blista film de rifer to rigid polyvinyl klorayd fɔm matirial we dɛn de saplae insay wan nominal 250mm wɛb wit fɔ kɔmpitabl blista pak ikwipmɛnt. Dɛn kin ɔt di fim ɛn mek am tɛmmofɔm insay kaviti dɛn we dɛn mek fɔ ol tablɛt, kapsul ɔ ɔda prɔdak dɛn we di matirial we dɛn dɔn pik dɔn kwalifay fɔ.

Di 250mm dimɛnshɔn de tɔk bɔt di wit we di film wɛb gɛt pas di tik ɔ di blista kad saiz we dɔn dɔn. Di kɔrɛkt wɛb wit dipen pan di pak mashin, tul layout, trim alawɛns ɛn prodakshɔn kɔnfigyushɔn.

Rigid PVC de gi fכm sabstεrayt fכ fayn blista aplikεshכn dεm. Di pak sistɛm in mɔstɔ protɛkshɔn, mɛkanikal pefɔmɛns ɛn siling intɛgriti dipen pan di PVC gred we dɛn pik, liding fɔyl, ɔt-sil kɔtin ɛn kɔmplit pak dizayn.

Klia ɛn Kɔlɔ Famasiutik PVC Film Imej dɛn

250mm Famasiutik PVC Film Teknik Spesifikasi

Di tebul sɔmariz prodak infɔmeshɔn fɔ di famasi PVC film rɛnj. Film dimɛnshɔn ɛn matirial strɔkchɔ fɔ mach to di intended blista fɔm ikwipmɛnt ɛn di apruv bay bay spɛsifikɛshɔn.

Ki ficha dɛn fɔ 250mm Famasiutik PVC Film

• 250mm Wɛb Wid: Na rɛfrɛns slit wit fɔ kɔmpitabl famasitik blista fɔm layn dɛn.

• Rigid PVC Structure: Na thermoformable fɔm wɛb fɔ fayn sɔlid-dos famasitik pak aplikeshɔn dɛn.

• Klia ɛn Kɔlɔ Fim: Difrɛn opshɔn dɛn fɔ luk akɔdin to di pak dizayn ɛn apruv fim fɔmyulashɔn.

• Tiknes Selekshɔn: Dɛn kin pik di film gej akɔdin to di blista dip, tul ɛn fɔm prɔses.

• Slit-Roll Rikwaymɛnt: Dɛn kin spɛsifa di film wɛb wit, di kɔr saiz, di rol dayamita ɛn di wayndin dairekshɔn fɔ di pak ikwipmɛnt.

• Lidding Compatibility: Dɛn kin evalyu di fɔm wɛb wit di rayt aluminiɔm lidding fɔyl ɛn ɔt-sil kɔtin.

• Matirial Kwalifayeshɔn: Fɔ yuz famasi nid fɔ rivyu di spɛshal fɔmyulashɔn, aplikebul dɔkyumentri ɛn finish pak pefɔmɛns.

Wetin Mek 250mm Film Width Impɔtant fɔ Blister Packaging

Di film wɛb wit na impɔtant bay bay paramita fɔ blista pak mashin dɛn. Wan rol we dɛn spɛsifa kɔrɛkt wan fɔ mach di mashin in film fidin arenjmɛnt, thermoforming steshɔn, siling tul ɛn wɛb-trim rikwaymɛnt dɛn.

Wan nominal 250mm PVC film rol kin fayn fɔ pak mashin dɛn we dɛn mek fɔ da wɛb wit de. Bɔt dɛn nɔ go ebul fɔ no if di ikwipmɛnt dɛn kɔmpitabl frɔm di waid nɔmɔ. Baya dɛn fɔ kɔnfɔm bak di film tik, di wit tolɛreshɔn, di kɔr saiz, rol ɔdasay dayamita ɛn di wayndin dairekshɔn.

Fɔ wan riplesmɛnt matirial, di existing apruv film spesifikeshɔn ɛn pak mashin mɔdel de gi yusful rɛfrɛns we yu de pik wan nyu rigid PVC fɔm wɛb.

Rigid PVC Film vs. PVC/PE ɛn Ay-Baria Film dɛn

Famasitik pak matirial kin yuz difrɛn strɔkchɔ dɛn dipen pan di drɔg prodak ɛn di pak we dɛn nid. Ɔdinari rigid PVC, PVC/PE laminated film ɛn PVC/PVDC barɛri film na difrɛn matirial opshɔn dɛn ɛn dɛn nɔ fɔ trit dɛn lɛk se dɛn kin chenj dɛn.

Aplikeshɔn dɛn fɔ Famasiutik PVC Film

Tablɛt Blister Pakɛj

Rigid PVC fɔm film kin yuz fɔ mek thermoformed blister cavities fɔ fayn tablɛt prodak. Film gej, kaviti dimɛnshɔn ɛn lid spɛsifikɛshɔn dɛn fɔ pik akɔdin to di aprɔv pakej dizayn ɛn prodakshɔn ikwipmɛnt.

Kapsul Blister Pak we dɛn kin yuz

fכ kapsul blista pak, di film tik εn fכm kכntribyushכn fכ mach di kaviti saiz εn shep we dεn nid. Pakɛj intɛgriti, matirial kɔmpatibiliti ɛn rilevɛns barɛri rikwaymɛnt fɔ validet fɔ di prɔdak we dɛn want.

Ɛlthkɛr ɛn Mɛdikal Pakɛj

Dɛn kin ebul fɔ evaluate di rigid PVC film gred dɛn we dɛn dɔn pik fɔ wɛlbɔdi biznɛs ɛn mɛdikal pak aplikeshɔn dɛn we nid fɔ mek dɛn yuz tɛmɔfɔm. Dairekt mɛdikal prodak kɔntakt ɛn stɛriyl pak aplikeshɔn dɛn nid dɛn yon matirial ɛn pak-sistim kwalifayeshɔn.

Rilat Fɔd Pakɛj ɛn Plastik Kɔnvɔyt Aplikeshɔn dɛn

HSQY in big plastic pak matirial rɛnj de sav mit, bɔd, fish, chiz, pasta ɛn ɔda it pak makɛt dɛn bak. Dɛn aplikeshɔn dɛn de kin nid difrɛn matirial strɔkchɔ ɛn dɛn fɔ mit di aplikeshɔn fɔ it-kɔntakt, gas barɛri, mɔstɔ barɛri ɛn siling rikwaymɛnt dɛn.

Pakɛj Aplikeshɔn Imej dɛn

Aw fɔ Pik 250mm PVC Film fɔ wan Blister Pakɛj Layn

1. Chek di Packaging Machine Web Width

Konfam di mashin in rikwayd fɔm-wɛb wit. Baya dɛn we de sɔs 250mm fim fɔ no di alaw wid tolɛreshɔn ɛn di kɔrɛspɔndɛns fɔm ɛn silin tul kɔnfigyushɔn.

2. Pik di Film Tiknɛs

di tik we di film tik de afekt di stiffness, thermoforming bihayv εn di amount of mεtirial we de fכ di cavity wכl dεm. di gej we yu nid fכ pik fכ di blista dip, di tablεt כ kapsul dimεnshכn εn di prodakshכn prכsεs.

3. Spɛsifik di Rol Dimɛnshɔn dɛn

Gi di kor dayamita we yu nid, rol ausayd dayamita, rol wet ɛn winding dairekshɔn. Dɛn dimɛnshɔn ya de inflɔws di fim fid, handel ɛn kɔmpitibliti wit di mashin in unwind sistem.

4. Kɔnfɔm Aluminium Lidding Fɔyl Kɔmpatibiliti

Identify di intended lidding foil ɛn ɔt-sil kɔtin. Di sil kɔmpatibiliti dipen pan di matirial ɛn di prɔses sɛtin, inklud tɛmpracha, di tɛm we dɛn de de ɛn di prɛshɔn.

5. Rivyu di Barɛri ɛn Rigyuletɔri Rikwaymɛnt dɛn

Di PVC film we yu dɔn pik ɛn di kɔmplit blista pakej fɔ gi di protɛkshɔn we di famasitik prodak nid. Rivyu aplikebul matirial spesifikeshɔn, stebiliti rikwaymɛnt ɛn dɔkyumentri fɔ di intended makit.

Kastom Famasiutik PVC Film fɔ Indastrial Baya dɛn

HSQY de wok wit famasi pak manifakta, blista kɔnvɔta ɛn industrial distribyushɔn we nid rigid PVC fɔm matirial. Duya gi dɛn tin ya bɔt aw fɔ bay tin we yu de aks fɔ kot:

• Di film wit we dɛn nid, inklud 250mm if i apɔynt

• Selekt PVC film tik ɛn tolɛreshɔn

• Di tin dɛn we dɛn nid fɔ mek fim klia ɔ we gɛt kɔlɔ

• Rigid PVC ɔ spɛsifikɛd laminat strɔkchɔ

• Blister pak mashin model

• Blister cavity dimɛnshɔn ɛn fɔm dip

• Rol kor, autsaid dayamita en winding dairekshon

• Aluminium lidding foil ɛn siling prɔses

• Rikwayd mɔstɔ ɔ ɔksijɛn barɛri pefɔmɛns

• Di dɔkyumɛnt dɛn we dɛn kin yuz fɔ pak di mɛrɛsin dɛn we dɛn kin yuz fɔ mek mɛrɛsin

• Purchase kwantiti, pak ɛn shipmɛnt dɛstineshɔn

PVC Film Pak ɛn Delivri

Dɛn fɔ pak di film rol dɛn fɔ protɛkt dɛn say ɛn ed dɛn we dɛn de kɛr dɛn go. Di rayt we fɔ pak di fim dipen pan di fim in wit, di wet we di rol wet, di kɔr spɛsifikɛshɔn ɛn di arenjmɛnt fɔ ship.

• Smɔl-Fɔmat Pak: Dɛn kin pak A4-sayz fim pis dɛn insay protɛktiv PP bag ɔ bɔks fɔ mek dɛn ebul fɔ evaluate di matirial.

• Film Roll Packing: PE film ɔ kraft pepa rap akɔdin to di rol ɛn sɔfays protɛkshɔn rikwaymɛnt.

• Rol Weyt: 30 kg fɔ wan rol de insay di prɔdak in pak infɔmeshɔn; di las rol wet fɔ spɛsifa fɔ di ɔda.

• Kor Dayamita: 76 mm insay kor dayamita we dɛn rɛfrɛns fɔ di pak film rɛnj.

• Palet Pak: Dɛn kin difayn di plai wud palet kɔnfigyushɔn dɛn akɔdin to di shipmɛnt spɛsifikɛshɔn dɛn we dɛn gri fɔ.

• Container Loading: Dɛn kin disayd bay di aktual rol saiz, palet kɔnfigyushɔn ɛn shiping rikwaymɛnt.

• Dilivri Tɛm: EXW, FOB, CNF ɔ DDU akɔdin to di kɔmɛshɔnal agrimɛnt.

• Lid Taym: Dɛn kin kɔnfyus am akɔdin to di matirial spɛsifikɛshɔn dɛn we dɛn dɔn pik, kwantiti ɛn prodakshɔn schedule.

PVC film pak pikchɔ dɛn

Kwaliti ɛn Famasiutik Pakɛj Dokumɛnt

Famasiutik pak manifakta dɛn fɔ evalyu matirial spɛsifikɛshɔn, fɔm pefɔmɛns ɛn prodak kɔmpatibiliti agens di rikwaymɛnt dɛn fɔ di pak aplikeshɔn we dɛn want.

Dɛn fɔ rivyu di kɔmni sɛtifiket dɛn, tɛst ripɔt dɛn ɛn matirial dɔkyumentri akɔdin to dɛn validiti naw, skɔp ɛn aplikebiliti fɔ di fim gred we dɛn dɔn pik. Di aprɔval fɔ dairekt famasitik kɔntakt dipen pan di rilevɛns rigyuleshɔn ɛn di kwalifay pak sistɛm.

HSQY Plastik Grup Intanɛshɔnal Ɛgzibishin dɛn

HSQY Plastic Group de tek pat pan intanashɔnal tred ɛgzibishin fɔ mit plastic film kɔnvɔta, pak manifakta, impɔt, distribyushɔn ɛn ɔda pɔshɔnal matirial bayer.

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt 250mm PVC Blister Film

Wetin na 250mm famasitik PVC film we dɛn de yuz fɔ?

250mm rigid PVC film de yuz as fכm wεb pan kompitibl blista pak mashin dεm. Dɛn kin yuz fayn film gred fɔ mek tablɛt, kapsul ɛn ɔda kwalifay sɔlid-dos famasitik blista pak dɛn.

250mm de diskraib di tik ɔ di wit we di fim gɛt?

250mm de rifer to di nominal film wɛb wit. Tiknes de spɛsifa separet insay milimita ɔ maykromita akɔdin to di film gej we dɛn nid.

Wetin na di tiknes rɛnj fɔ dis PVC film?

Di listed rigid PVC prodakt rεnj inklud tiknes 0.12–0.30 mm. Dɛn fɔ pik wan patikyula tik akɔdin to di blista jɔyometri, pak mashin ɛn kwalifay matirial spɛsifikɛshɔn.

Yu tink se dɛn kin gi di fim wit ɔda kɔlɔ dɛn pas klia?

Di prodak rɛnj rɛfrɛns klia, wayt, rɛd, grɛn, yɔlɔ ɛn ɔda kɔlɔ opshɔn dɛn. Kɔlɔ avaylabl ɛn fit fɔ di intended famasi aplikeshɔn fɔ kɔnfyus fɔ di fɔmyulashɔn we dɛn dɔn pik.

Rigid PVC film di sem wit PVC/PE laminated film?

Nɔ. Rigid PVC film na wan-material fɔm film, we PVC/PE na laminated strɔkchɔ we inkɔrpɔret wan polyethylene layt. Di wan dɛn we de bay fɔ no di rayt matirial strɔkchɔ we dɛn nid fɔ pak.

Yu tink se yu kin yuz dis fim wit aluminiɔm blista liding fɔyl?

Wan fayn rigid PVC fɔm film kin kam togɛda wit kɔmpitabl aluminiɔm liding fɔyl. Di lid fɔyl in ɔt-sil kɔtin ɛn di ful silin prɔses fɔ validet fɔ di fim we yu dɔn pik.

Wetin na di difrɛns bitwin ɔdinari PVC ɛn PVC/PVDC fim?

PVC/PVDC inklud wan ɔda PVDC barɛri layt. Dɛn kin pik am we dɛn nid fɔ du mɔ mɔstɔ ɔ ɔksijɛn barɛri. Di barɛri we dɛn nid fɔ establish frɔm di pak prodak in stebiliti nid ɛn di fim in tɛknikal data.

Ɛvri rigid PVC film fayn fɔ dairekt famasi kɔntakt?

Nɔ. Famasiutik suitabiliti dipen pan di spɛshal matirial fɔmyulashɔn, aplikebul standad, prodak kɔmpitibliti ɛn kwalifayeshɔn fɔ di kɔmplit pak sistɛm.

Us rol spɛsifikɛshɔn dɛn nid fɔ wan blista pak mashin?

Di wan dɛn we de bay fɔ spɛsifa di wɛb wit, tik, kɔr dayamita, rol ɔdasay dayamita, wayndin dairekshɔn ɛn ɛni dimɛnshɔnal tolɛreshɔn we di fɔm ikwipmɛnt nid.

Yu tink se dɛn kin gi ɔda fim wit dɛn?

Di prodakt rɛnj de rifer to kɔstɔmayt fim saiz dɛn. Di wan dɛn we de bay fɔ gi di wɛb wit we dɛn nid ɛn di rol spɛsifikɛshɔn dɛn we gɛt fɔ du wit am fɔ rivyu.

Wetin a fɔ gi we a de aks fɔ kot?

Duya gi di film wit we yu nid, tik, kɔlɔ, PVC matirial strɔkchɔ, blista mashin mɔdel, rol dimɛnshɔn, lid we yu nid, kwantiti ɛn usay yu de go. Inklud ɛni matirial standad ɔ kwalifayeshɔn rikwaymɛnt dɛn we de.

Bɔt HSQY Plastik Grup

Changzhou Huisu Qinye Plastik Grup Kɔmni, Ltd. de na Changzhou, Jiangsu, Chaina. HSQY de saplae PVC film, PVC sheet, PET sheet, CPET trey, PP kɔntena ɛn ɔda plastic matirial fɔ industrial pak ɛn kɔnvɔshɔn.

Fɔ famasitik pak manifakta, blista pak kɔnvɔta, industrial bayer ɛn matirial distribyushɔn, HSQY kin tɔk bɔt rigid PVC fɔm film rikwaymɛnt inklud wit, tik, kɔlɔ, rol kɔnfigyushɔn ɛn pak aplikeshɔn.

Kɔntakt HSQY Plastik Grup fɔ tɔk bɔt 250mm famasitik PVC blista film ɛn yu prodakshɔn layn in matirial rikwaymɛnt dɛn.

HUISU QINYE PLASTIC GROUP spɛshal bak pan famasi, it, ɛn ay-lɛv komoditi pak matirial divɛlɔpmɛnt ɛn prodakshɔn. Wi prodakshɔn rum mit di 100K klarifyeshɔn plant Klas we GMP dɔn gri fɔ. Wi gɛt advans tropik blista aluminiɔm fɔyl prodakshɔn ikwipmɛnt ɛn wan ful sɛt fɔ inspekshɔn inschrumɛnt dɛn. Na di sem tɛm, wi kɔmni dɔn mek wan pafɛkt kwaliti kɔntrol sistem, we gɛt pɔshɔnal tɛknishian dɛn ɛn machɔ prodak teknɔlɔji. Ɔl tu di hadwae ɛn softwea kɔndishɔn dɛn kin gi garanti se wi kin gi pafɛkt sɔlv kes dɛn.

Wi kɔnsɛpt fɔ tink bɔt ɔl tu di kwaliti ɛn savis ikwal impɔtant ɛn pefɔmɛns de gɛt trɔst frɔm di kɔstɔma dɛn, na dat mek wi dɔn mek gud kɔpɔreshɔn wit wi klaynt dɛn frɔm Spen, Itali, Ɔstria, Pɔtyuga, Jamani, Gris, Polan, Ingland, Amɛrika, Sawt Amɛrika, India, Tayland, Malezya ɛn so ɔda wan dɛn. 'Rɛspɔnsibiliti, Pashɔn, Inovashɔn ɛn Efisiɛns' na wi biznɛs ideal. Wi op se wi kin mek mɔ valyu fɔ wi klaynt dɛn wit wi kɔntinyu fɔ tray ɛn mɔ jɛntri fɔ wi sosayti.