PVC Plastik Rol fɔ Tɛmofɔmin Fɔd pakej

PVC Tɛmofɔmin Film fɔ Fɔd Pakɛj

HSQY de mek klia rigid PVC thermoforming film rol fɔ fud trey, bekeri pak, kɔnfɛkshɔn insɛt, fresh-prodyuz kɔntena, klamshɛl, blista pak ɛn kɔstɔmayz rigid pak aplikeshɔn.

Di matirial na rigid polyvinyl klorayd film we dɛn ɛnjinia fɔ ɔt, fɔm ɛn trim pan vaykum-fɔmin, prɛshɔn-fɔmin ɛn fɔm-fil-sil ikwipmɛnt.

Standart transparent film de gi klia prodak visibiliti, kɔntrol stiffness ɛn rili fɔm pefɔmɛns fɔ rital ɛn fud-pak aplikeshɔn.

di rεkomεnd rigid PVC rol rεnj na aprכksimatli 0.15mm to 1mm. Selekt spɛsifikɛshɔn dɛn we go rich lɛk 1.5mm kin saplae insay rol afta dɛn dɔn kɔnfɔm rol dayamita, bɛnd rayus, kɔr trɛnk ɛn kɔstɔma ikwipmɛnt.

Tik PVC prodakt dεm insay di brayt pכblished rεnj dεn nכmal fכ saplae as flat sheet pas fכd-pak rol.

Rol wit frɔm lɛk 10mm to 1280mm de, we de ɔnda tik, edj tolɛreshɔn, rol wet ɛn prodakshɔn fisibiliti.

Natural klia, blu-tinted transparent, opaque ɛn kɔstɔmayz kɔlɔ fim dɛn kin prodyuz wit glos, mat ɔ frɔst sɔfays.

Food-contact, anti-blocking, anti-static, impact-modified, UV-stabilized, flame-retardant ɛn barɛri gred dɛn de as sɛpret fɔmyulashɔn ɔ strɔkchɔ dɛn we de ɔnda di tɛst standad ɛn aplikeshɔn we dɛn nid.

fכd-kכntakt suitabiliti nכ de establish כnli bay we dεn yuz vεrjin PVC rεsin. Di kɔmplit fɔmyulashɔn, di kayn it, kɔntakt tɛmpracha, kɔntakt durayshɔn ɛn di dɛstineshɔn-maket rikwaymɛnt dɛn fɔ kɔnfɔm.

Eksplore di komplit HSQY rigid PVC sheet ɛn film rɛnj fɔ it pak, printin, tɛmfɔmin ɛn industrial aplikeshɔn dɛn.

Rikwest PVC Fim Prayz    Rikwest Tɛmofɔmin Sampul dɛn

PVC Plastik Rol Prodakt Vidio

Wach di vidio dɔŋ ya fɔ rivyu HSQY rigid PVC film rol ɛn rilat thermoforming aplikeshɔn dɛn.

Klia PVC Tɛmofɔmin Film Imej dɛn

Wetin Na Rigid PVC Tɛmofɔmin Film?

Rigid PVC thermoforming film na semi-rigid ɔ rigid polyvinyl klorayd matirial we dɛn kin gi insay kɔntinyu rol fɔ ɔt ɛn fɔm insay pak kaviti.

difrεnt lεk fleksibul PVC kling film, rigid tεmכfכm film kכntεn sכm כ nכ intentionally ad plasticizer akɔdin to di fכmyuleshכn we dεn sεlekt εn i de rεtain di shep fכ di fכm trey כ paket.

di film kin proses insay trey, klamshεl, blista kεviti, insεt, lid εn pak kכmכpכnt dεm we yu de yuz vεkyum, prεshכn כ mεkanikal fכm.

Faynal pefomans dipen pan di PVC rεsin, stεbyulayza sistεm, impak modifya, prכsεsin εd, kכlכrant, tiknes tכlerεns, εkstrushכn כ kalenda kכndishכn εn fכm ikwipεnt.

PVC Fɔd Pakɛj Film Spɛsifikeshɔn dɛn

Faynal spɛsifikɛshɔn fɔ no di nominal tik, tolɛreshɔn, wit, rol lɔng, rol wet, kɔr dayamita, wayndin dairekshɔn, kɔlɔ, sɔfays, it-kɔntakt kɔndishɔn ɛn fɔm prɔses.

Ki Ficha dɛn fɔ Rigid PVC Tɛmofɔmin Film

• Klir prodak visibiliti: Transparent gred de alaw kɔstɔma ɛn inspɛkta fɔ si di prɔdak we dɛn pak.

• Tεmכfכm pכrfomans: Suitabl gred dεm kin fכm ditayl trey, kכva, lid εn klamshεl.

• Kontrol stiffness: I de gi strɔkchɔral bɔdi fɔ laytwɛt rigid pak.

• Printability: Di say dɛn we yu dɔn pik kin sɔpɔt UV ɔfset, skrin ɛn dijital printin.

• Kɔlɔ kɔstɔmayshɔn: Klia, tint ɛn opaque kɔlɔ dɛn de.

• Surface customization: Dɛn kin prodyuz glos, mat ɛn frɔst finish.

• Impact-modified option: Dɛn kin divɛlɔp inkris impak pefɔmɛns fɔ kol ɔ dimand aplikeshɔn dɛn.

• Anti-blok opshɔn: Surface formulation ɔ coating kin ɛp fɔ impɔtant rol unwinding ɛn sheet separation.

• Speshal barεri strכkchכ dεm: dεn kin evaluate PVDC כ כda barεri layεr dεm we mono PVC nכ infεkt.

Fɔd-Kɔntakt Kɔmplians Rikwaymɛnt

Virgin PVC resin nכmכ de establish komplians fכ dayrekt fכd kכntakt.

di komplit film fכmyuleshכn inklud stεbyulayza, lכbrikεnt, impak modifya, prכsεsin εd, pigmεnt εn כda sכbstans dεm we fכ fit di fכd-kכntakt kכndishכn dεm we dεn bin want.

Di wan dɛn we de bay fɔ sho di kayn it, dairekt ɔ indayrɛkt kɔntakt, kɔntakt tɛmpracha, kɔntakt tɛmpracha, stɔrɔj ​​tɛmpracha, filin prɔses ɛn di dɛstineshɔn makit.

Print ɔ laminated pak fɔ evaluate bak ink, kɔtin, prayma, adeziv, ɔt-sil layers ɛn liding film.

Di dɔkyumɛnt dɛn we gɛt fɔ du wit di lɔ kin inklud diklareshɔn fɔ kɔmplians, fɔmyulashɔn stetmɛnt, maykreshɔn tɛst ripɔt, rɛsin ɔtorizeshɔn infɔmeshɔn ɛn sɔpɔt tɛst rɛkɔd dɛn.

PVC Tɛmofɔmin Prɔses

Rigid PVC film kin prosɛs yuz vaykum fɔm, prɛshɔn fɔm, plɔg-ɛsist fɔm ɛn mach-mɔld fɔm.

di fכs fכm trayal dεm kin kכmכn fכ du insay wan kכntroled shit-tεmprachכ rεnj, bכt di kכrekt sεtin dipכnt pan di εksakכt fכmyuleshכn, tiknes, hεta tεyp, hεt tεm, mכld εn prodakshכn spid.

PVC na sɛnsitiv to ɔt pasmak. If yu ɔt ɔ we yu de de pasmak, i kin mek yu yɔlɔ, smel, bɔbul, di say we yu de pwɛl, i nɔ kin klia ɛn i kin mek di mashin nɔ wok fayn.

Hɛt fɔ bi yunifom tru di film wit ɛn tik. Mold ventin, plɔg dizayn, kol ɛn trim kɔndishɔn dɛn fɔ validet bak.

Mono PVC ɛn Ay-Baria Pakɛj Strukchɔ dɛn

Baya dɛn we nid fɔ gɛt ɛkstend shelf layf fɔ gi di target ɔksijɛn-transmishɔn rɛt, wata-vaypa-transmishɔn rɛt, di kayn it, tɛmpracha fɔ stɔrɔj ​​ɛn di shelf layf we dɛn nid.

Hɛt Silin ɛn Lidin Kɔmpatibiliti

Fɔm PVC trey nɔ kin ɔtomɛtik sial to ɛvri liding film.

di siling pefomans dipen pan di PVC surface, coating or laminate, lidding-film sealant, siling temperechur, prɛshɔn, di tɛm we yu de liv, di flɛnch flatnɛs ɛn it kɔntaminɛshɔn.

• Konfam di lidding-film strɔkchɔ ɛn sialant layt.

• Mekɔp di sil initieshɔn tɛmpracha ɛn di opareshɔn winda.

• Test peel fos, burst resistans ɛn lik pefɔmɛns.

• Evaluate di sil pefɔmans afta yu dɔn chill, friz ɔ transpɔt.

• Test siling tru ɔyl, mɔstɔ, krɔm ɔ ɔda kɔntaminɛshɔn we yu de ɛkspɛkt.

• Kɔnfɛm if dɛn nid fɔ wok fɔ lɔk-sil, fɔ pul am ɔ fɔ mek i izi fɔ opin.

Aplikeshɔn fɔ PVC Fɔd Pakɛj Fim

• Bekeri pak: Klia trey, klamshɛl ɛn insɛt fɔ kek, biskit ɛn paste.

• Kɔnfɛkshɔn pak: Chɔklɛt, kandy ɛn gift-bɔks insɛt.

• Fresh-prodyuz pak: Dɛn pik frut, vɛjitebul ɛn salad pak dɛn we de yuz wan gred we dɛn dɔn gri fɔ fɔ kɔntakt it.

• Fɔd trey: Layt wet rigid trey fɔ ambient, chilled ɔ aplikeshɔn-spɛsifi k stɔrɔj.

• Klamshɛl pak: Hinged transparent pak fɔ rital prodak.

• Blista pak: Klia fɔm pak fɔ kɔshɔma guds ɛn sɔm it prodak dɛm we dɛn dɔn pik.

• Ritayl insɛt: Transparent ɔ kɔlɔ insɛt fɔ kɔsmɛtik, tɔys, hadwae ɛn gift.

• Di pak we dɛn print: Plastik bɔks ɔ sliv dɛn we dɛn print wit UV ɛn we dɛn print na skrin.

• Mɛdikal pak: Na wan dediket mɛdikal-pak gred ɛn validet prɔses nɔmɔ yu de yuz.

• Famasiutik blista: Na yu de yuz dediket famasi-grɛd PVC fim nɔmɔ.

Tɛmofɔmin Aplikeshɔn Imej dɛn

Famasiutik ɛn Mɛdikal Pakɛj Gred

Standart fud-pakej ɔ industrial PVC fim nɔ fɔ yuz ɔtomɛtik wan fɔ famasitik ɔ stɛriyl mɛdikal pak.

Famasiutik blista film kin nid fɔ gɛt dediket rɛsin ɛn aditiv sistɛm, kɔntrol prodakshɔn ɛnvayrɔmɛnt, batch traceability, tiknɛs kɔntrol, shrinkage tɛst ɛn kɔmpatibiliti wit lidding fɔyl.

Medikal-divays pak kin nid fɔ klin, sterilayz kɔmpatibiliti, maykrobial kɔntrol, sil validɛshɔn, ol stɔdi ɛn divays-spɛsifi k dɔkyumentri.

Dɛn fɔ kot ɛn gri fɔ dɛn aplikeshɔn dɛn ya apat frɔm standad fim we dɛn kin pak it.

Print ɛn Kɔnvɔyt PVC Fim

Rigid PVC film kin print, day kɔt, panch, skor, fold ɛn bon fɔ pak ɛn displei aplikeshɔn.

Anti-Statik, Anti-Blɔk ɛn Impɛkt Gred dɛn

Flame-Retardant ɛn Self-Extinguishing Klɛm dɛn

Rigid PVC kin sho sef-extinguishing bihayvya, bכt wan spεsifi k flammabiliti klasifikasiכn nכ fכ asum fכ εvri fכmyuleshכn.

Flame-retardant pefɔmɛns fɔ kɔnfɔm yuz di ɛksaktɔ film gred, tiknɛs, kɔlɔ, spɛshal ɔryenteshɔn ɛn tɛst standad.

Wan matirial-lɛvɛl tɛst nɔ de establish di faya klasification fɔ wan kɔmplit it trey, paket, displei ɔ finish prodak.

Kwaliti-Kɔntrol Tɛst dɛn we Dɛn Rikɔmɛnd

• PVC resin ɛn fɔmyulashɔn verifyeshɔn.

• Tik ɛn tik tolɛreshɔn.

• Rol wit, rol lɔng, rol wet ɛn kɔr dayamita.

• Winding dairekshɔn, rol tɛnsiɔn, tɛliskɔp ɛn ed alaynɛshɔn.

• Densiti ɔ sheet-weyt verifyeshɔn.

• Transparency, haz, glos ɛn yɔlɔnɛs indeks.

• Difrɛns pan kɔlɔ ɛn batch-to-batch kɔlɔ.

• Blak spat, jel, bɔbul, layn, skrat ɛn kɔntaminɛshɔn.

• Tensile strength, elongation ɛn impak pefɔmɛns.

• Mashin-dayrɛkshɔn ɛn transvas-dayrɛkshɔn shrinkage.

• Tɛrmofɔmin tɛmpracha winda ɛn wɛb sag.

• Fɔm dip ɛn wɔl-tiknɛs distribyushɔn.

• Yɔlɔ ɛn dɛgradɛshɔn afta dɛn dɔn fɔm.

• Trim, panch ɛn ed-krak pefɔmɛns.

• Anti-blɔk ɛn rol-rilis pefɔmɛns.

• Surface resistans fɔ anti-statik gred dɛn.

• Hɛt-sil trɛnk ɛn pak-lik tɛst.

• OTR ɛn WVTR tɛst usay dɛn nid fɔ du barɛri pefɔmɛns.

• Oval ɛn spɛshal maykreshɔn tɛst usay i apɔynt.

• Printin-ink adheshon ɛn maykreshɔn ɛvalueshɔn.

• Pak, palet ɛn kɔntena-lod inspekshɔn.

Kastom PVC Tɛmofɔmin Film Opshɔn dɛn

• Rigid PVC rol tiknes frɔm lɛk 0.15mm to 1mm.

• Selekt hevi rol gej dɛn we dɛn kin kɔnfɔm.

• Rol wit frɔm lɛk 10mm to 1280mm.

• Kastamayz rol lɔng, wet ɛn kɔr dayamita.

• Natural klia ɛn blu-tinted transparent fim.

• Opaque ɛn kɔstɔmayt kɔlɔ fim.

• Glossy, mat ɛn frɔst sɔfays dɛn.

• Fɔmyulashɔn dɛn we gɛt fɔ du wit it-kɔntakt we gɛt fɔ du wit dɔkyumentri.

• Anti-blɔk ɛn anti-statik gred dɛn.

• Gret dɛn we gɛt ay impak ɛn we nɔ de mek kol.

• UV-stabilized ɛn flame-retardant gred dɛn.

• PVC /PVDC ɛn kɔstɔmayz barɛri strɔkchɔ dɛn.

• Sɔfays dɛn we dɛn kin print ɛn we dɛn kɔt.

• Customized labels, katon, palet ɛn shiping mak dɛn.

Infɔmeshɔn we dɛn nid fɔ mek PVC Film Quote

• Tik ɛn tolɛreshɔn we dɛn nid.

• Rikwayd rol wit ɛn edj tolɛreshɔn.

• Rikwayd rol lɔng, rol wet ɛn kɔr dayamita.

• Winding dairekshɔn ɛn maksimal rol dayamita.

• Klia, blu-tinted, opaque ɔ kɔstɔmayz kɔlɔ.

• Glos, mat ɔ frɔst sɔfays.

• Ikwipmɛnt fɔ mek di thermoforming ɛn layn spid.

• Mold dimɛnshɔn, kaviti dip ɛn drɔ ratio.

• Di kayn it, kɔntakt tɛmpracha ɛn shelf layf.

• Rikwayd fɔ it-kɔntakt rigyuleshɔn ɛn dɔkyumentri.

• Rikwayd OTR, WVTR ɔ barɛri strɔkchɔ.

• Lidding-film ɛn siling rikwaymɛnt dɛn.

• Anti-statik, anti-blɔk, impak ɔ UV rikwaymɛnt dɛn.

• Printin, kɔt ɔ adhesive-bonding prɔses.

• Initial ɔda kwantiti ɛn ɛstimat ɛni ia dimand.

• Packing, destination port ɛn di de we dɛn nid fɔ sɛn am.

Send Yu PVC Film Rikwaymɛnt dɛn

PVC Plastik Rol MSDS

Daunlod di PVC matirial sefty data sheet we de dɔŋ ya.

Di MSDS de gi jenɛral matirial-sefty infɔmeshɔn ɛn i nɔ de indipɛndɛnt fɔ establish fud-kɔntakt kɔmplians, maykreshɔn pefɔmɛns ɔ fit fɔ wan patikyula pak aplikeshɔn.

   Daunlod PVC Plastik Rol MSDS

Pakɛj ɛn Delivri

Sampul pak: A4 sheet ɛn smɔl kɔt sɛmpul dɛn kin protɛkt wit PE bag ɛn pak dɛn insay rigid kɔriɔ katon.

Rol pak: PVC rol kin rap wit protɛktiv PE film ɛn kraft pepa akɔdin to di rol dimɛnshɔn ɛn transpɔt rikwaymɛnt.

Kor protɛkshɔn: Dɛn kin protɛkt di pepa kɔr ɛn di rol ɛnd fɔ ridyus di krɔsh ɛn di ed damej.

Palet pak: Dɛn kin sikyuɔr di rol dɛn vertikal ɔ ɔrizɔntal pan ɛkspɔt palet akɔdin to di rol wit, wet ɛn di ikwipmɛnt fɔ di kɔstɔma dɛn.

Stɔrej: Stɔr di fim insay os na klin, dray ɛn ventilated eria fa frɔm dairekt san layt, ɔt sɔs ɛn pasmak stak prɛshɔn.

Lid tɛm: Standart prodakshɔn jɔs nid lɛk 7-15 dez afta spɛsifikɛshɔn, sampul, dipɔsit ɛn pak kɔnfɔmeshɔn.

Sɛtifiket ɛn Kɔmplians Dɔkyumɛnt dɛn

Di dɔkyumɛnt dɛn we de kin gɛt tɛnki data shit, sefty data shit, fɔmyulashɔn stetmɛnt, maykreshɔn ripɔt, ristrikt-sɔbstans ripɔt ɛn kwaliti-mɛnejmɛnt sɛtifiket.

Dɛn fɔ diskrayb SGS akɔdin to di ɛksaktɔl tɛst we dɛn du ɛn dɛn nɔ fɔ prɛzɛnt am as yunivasal fud-sefty sɛtifiket.

ISO 9001 gɛt fɔ du wit di manifakta in kwaliti-mɛnejmɛnt sistɛm ɛn i nɔ de indipɛndɛnt fɔ establish fud-kɔntakt, barɛri, silin ɔ tɛmfɔmin pefɔmɛns.

ISO 9001:2008 na wan standad we dɛn dɔn pul. Di pɔsin we gɛt di sɛtifiket naw, di adrɛs we dɛn mek am, di standad ɛdyushɔn, di sɛtifiket skɔp ɛn di tɛm we i go wok bifo dɛn pablish am.

Ɛvri ripɔt fɔ kɔrɛkt to di ɛksaktɔl PVC fɔmyulashɔn, tik, kɔlɔ, di say we dɛn de prodyuz ɛn di kɔndishɔn dɛn we dɛn bin want fɔ gɛt fɔ kɔntakt it.

HSQY Globɛl Ɛgzibishin dɛn

Wetin Mek Yu Pik HSQY as Yu PVC Film Supplier?

• Rigid PVC thermoforming film rol fɔ pak prodakshɔn.

• Rikomεnd rol tiknes frכm aprכksimatli 0.15mm to 1mm.

• Rol widths op to aprɔksimatli 1280mm.

• Klia, blu-tinted, opaque ɛn kɔstɔm-kɔlɔ gred dɛn.

• Glossy, mat ɛn frɔst sɔfays opshɔn dɛn.

• Fɔmyulashɔn dɛn we gɛt fɔ du wit it-kɔntakt we gɛt fɔ du wit dɔkyumentri.

• Anti-blɔk, anti-statik ɛn ay-impakt opshɔn dɛn.

• Barɛri, strɔkchɔ dɛn we dɛn kin print ɛn we dɛn kɔt.

• Sampul fɔ fɔm, sial ɛn pak tɛst.

• Kastamayz rol wet, kor, winding ɛn palet pak.

• Intanɛshɔnal B2B prodakshɔn ɛn delivri sɔpɔt.

Bifo dɛn prodyuz bɔku bɔku wan, HSQY se yu fɔ tɛst di fim we yu dɔn pik pan di kɔstɔma in aktual tɛmfɔmin mashin, mold, liding film, siling ikwipmɛnt ɛn it we dɛn pak.

Kontakt HSQY fɔ Sampul ɛn Prayz

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt PVC Thermoforming Film

Wetin na rigid PVC thermoforming film?

Na rigid PVC matirial we dɛn kin gi insay rol ɛn dɛn mek am fɔ ɔt ɛn fɔm am to tre, klamshɛl, blista, insɛt ɛn ɔda tin dɛn we dɛn kin pak.

Rigid PVC film na di sem wit PVC kling film?

Nɔ. Rigid thermoforming film de mentɛn in fɔm shep, we PVC kling film na soft, fleksibul ɛn dɛn mek am fɔ rap prodak.

Us tiknes dɛn kin rɛkɔmɛnd fɔ PVC rol dɛn?

di rεkomεnd rigid PVC rol rεnj na aprכksimatli 0.15mm to 1mm. Gej dɛn we ebi pasmak nid fɔ gɛt sɛpret kɔnfɔmeshɔn.

Yu tink se 6mm PVC kin saplae as rol?

PVC na dis tiknes go nכmal fכ saplae as flat shit pas pak rol.

Us rol wit dɛn de?

Customized widths frɔm aprɔksimatli 10mm to 1280mm de, we de ɔnda tik ɛn prodakshɔn kɔnfɔmeshɔn.

Evri vajin PVC film fud sef?

Nɔ, di fayn we aw dɛn kin kɔntakt di it kin dipen pan di kɔmplit fɔmyulashɔn, di kayn it, di tɛmpracha, di tɛm we dɛn kin kɔntakt ɛn di tin dɛn we dɛn nid fɔ du na di say we dɛn want fɔ go.

Yu tink se SGS ripɔt de pruv se dɛn de fala di lɔ we pɔsin kin gɛt wit it?

Na we di ripɔt kɔba di ɛksaktɔl fim fɔmyulashɔn, rilevɛns rigyuleshɔn, it simulshɔn ɛn di kɔndishɔn dɛn we dɛn bin want fɔ yuz.

ISO 9001 pruv se PVC film na fud sef?

Nɔ, ISO 9001 gɛt fɔ du wit wan manifakta in kwaliti-mɛnejmɛnt sistɛm ɛn i nɔ de indipɛndɛnt fɔ establish fud-kɔntakt kɔmplians.

Yu tink se dɛn kin yuz PVC fim fɔ it tin dɛn we gɛt fat?

Dɛn fɔ kɔnfyus if i fayn fɔ it dɛn we gɛt fat bay we dɛn yuz di ɛksaktɔl fɔmyulashɔn ɛn maykreshɔn tɛst dɛn ɔnda di tɛmpracha ɛn di kɔndishɔn dɛn we dɛn bin want fɔ kip.

Yu tink se PVC film kin bi vaykum fɔm?

Yɛs. Wan fayn rigid PVC gred kin bi vaykum fɔm afta di ɔt profayl, mold, drɔ rεshɔn ɛn kol prɔses dɔn validet.

Us tɛmpracha dɛn kin yuz fɔ thermoform PVC ?

di korekt tεmprachכ dipכnt pan di fכmyuleshכn, tiknes, hεta εn fכm ikwipεshכn. Trayal fɔ avɔyd pasmak ɔt we kin pwɛl PVC .

Wetin mek PVC fim de tɔn yɔlɔ we i de fɔm?

Yɔlɔ kin kɔmɔt frɔm di tɛmpracha we pasmak, di tɛm we i de ɔt pasmak, di tɛm we di mashin de de fɔ lɔng tɛm ɔ we di ɔt nɔ de wok fayn.

Na mono PVC na ay-baria fim?

Standart mono PVC nɔ fɔ ɔtomɛtik diskrayb as ay ɔksijɛn ɔ wata-vaypa barɛri. Ɛnhans shelf layf kin nid PVDC ɔ ɔda barɛri layt.

Wetin na PVC /PVDC fim?

Na rigid PVC bays film we dɛn kɔt ɔ kɔba wit PVDC fɔ mek di mɔstɔ ɛn gas barɛri wok fayn.

Yu tink se PVC trey kin sial wit liding film?

Yes, we di PVC sɔfa ɔ sil layt kɔmpitabl wit di lidding film we dɛn dɔn pik ɛn di siling prɔses dɔn validet.

Yu tink se PVC thermoforming film kin print?

Di gred dɛn we fit kin bi UV ɔfset print, skrin print ɔ UV inkjet print afta adheshon, curing ɛn migration test.

Anti-statik PVC fim de?

Yɛs. Anti-statik gred dεm kin divεlכp akɔdin to di rεsistεns rεnj, tεst kכndishכn dεm εn ifektiv durashכn.

Wetin na anti-blɔk PVC fim?

Anti-blok film dεn mek am fכ ridyus di stik bitwin adjasent layεr dεm we dεn de waynd, stכrej εn כtomatik fכd.

Na PVC film UV resistant?

Standard klia PVC nɔ fɔ ɔtomɛtik wan we dɛn tek am se na UV stebul. Wan dediket fɔmyulashɔn ɛn wɛda rikwaymɛnt dɛn nid.

Rigid PVC de kil insɛf?

sכm rigid PVC fכmyuleshכn dεm de sho sεlf-extinguishing bihayvya, bכt di εksakεt klasification mכst kכnfכm fכ di tεst grεd εn tiknes.

Yu tink se dɛn kin yuz standad it-grɛd PVC fɔ famasitik blista?

Nɔ. Famasiutik blista dɛn nid fɔ gɛt wan dediket famasitik-grɛd fim ɛn di rayt rigyuletɔri, fɔm ɛn silin validɛshɔn.

Yu tink se dɛn kin yuz standad PVC fim fɔ stɛriyl mɛdikal pak?

Stɛriyl mɛdikal pak nid fɔ gɛt dediket mɛdikal-pakɛj gred ɛn validɛshɔn fɔ klin, sial, sterilayz ɛn ol.

Wetin na di minimum ɔda kwantiti?

Di standad rεfrεns MOQ na aprכksimatli 1000kg. Kɔlɔ, kɔtin ɛn funkshɔn gred dɛn we dɛn kɔstɔmayz kin nid difrɛn MOQ.

PVC thermoforming sɛmpul dɛn de?

A4 sɛmpul dɛn we dɔn de, kɔt sheet ɛn limited rol sɛmpul dɛn kin de. Di gred dɛn we dɛn kɔstɔmayt kin nid fɔ mek dɛn tray fɔ mek dɛn.

Wetin na di prodakshɔn lida tɛm?

Standart prodakshכn jεnarali nid fכ 7-15 dez afta dεn kכnfכm di spεsifikεshכn, sεmpl, dipכsit εn pak.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?

Gi di tik, wit, rol spɛsifikɛshɔn, it tayp, fɔm prɔses, barɛri rikwaymɛnt, lidding film, ɔda kwantiti, pak ɛn dɛstineshɔn.

Get wan PVC Tɛmofɔmin Film Kɔt

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae rigid PVC thermoforming film, transparent PVC shit, PET shit, PP shit, barɛri pak matirial ɛn kɔstɔmayz plastic prodak to intanashɔnal B2B kɔstɔma dɛn.

HSQY de sɔpɔt thermoforming kɔmni dɛn, fud-pak manifakta dɛn, printin kɔmni dɛn, pak kɔnvɔta dɛn, importa ɛn distribyushɔn dɛn wit matirial sɛlɛkshɔn, sɛmpul, kɔstɔmayz prodakshɔn, kwaliti inspekshɔn ɛn ɛkspɔt pak.

Rikwest fɔ Kot ɛn Sampul