Supa Klia 1mm PVC Rigid Plastik shit Rol Fɔ Tɛrmofɔmin.

Supa Klia 1mm Rigid PVC Sheet we de na di wɔl Rol fɔ Tɛrmofɔmin

HSQY de mek supa-klia 1mm rigid PVC sheet matirial rol fɔ thermoforming, vaykum fɔm, blista pak, klamshɛl, trey dɛn , rital displei pak, mɛdikal-divays trey dɛn ɛn industrial fɔm kɔmpɔnɛnt dɛn.

Di prodak we dɛn sho gɛt wan nominal tik we na 1mm. Customized PVC sheet matirial s de insay tiknes frɔm lɛk 0.15mm to 5mm, we de ɔnda di wit we dɛn nid, rol fɔmat, sheet matirial fɔmat ɛn aplikeshɔn.

Klia rigid PVC de gi yusful optik klia, dimɛnshɔnal stebiliti ɛn fɔm pefɔmɛns fɔ pak ɛn industrial kɔnvɔshɔn. Di ekzak layt transmishɔn, haz, tint ɛn sɔfayz kwaliti fɔ kɔnfyus yuz wan aprɔv prodakshɔn sampul.

Aplikeshɔn-spɛsifi k fɔmyulashɔn dɛn de fɔ jenɛral tɛmfɔmin, it-kɔntakt pak, mɛdikal-divays trey dɛn , famasitik pak, printin, fɔlding bɔks, antistatik aplikeshɔn ɛn UV-stabiliz prodak.

Fɔd, famasitik ɛn mɛdikal aplikeshɔn dɛn nid dediket spɛsifikɛshɔn ɛn aplikeshɔn kɔmplians dɔkyumɛnt dɛn. Vεrjin rεsin kכntεnt nכmכ de establish suitability fכ wan rεgulεt εnd yus.

Fɔ si ɔda tin dɛn, luk di... HSQY transparent PVC blista sheet matirial rεnj, famasitik PVC fim dɛn ɛn PET tεmכfכm sheet matirial s.

Rikwest 1mm PVC Sheet we de na di wɔl Prayz    Rikwest Fɔm Sampul dɛn

Rigid PVC Tɛmofɔmin Shit Vidio

Wach di fim we de dɔŋ fɔ lan mɔ bɔt HSQY rigid PVC sheet matirial rol dɛn, prodakshɔn fɔmat dɛn, fɔm aplikeshɔn dɛn ɛn kɔstɔmayz spɛsifikɛshɔn dɛn.

Wetin Na 1mm Rigid PVC Tɛmofɔmin Shit?

1mm rigid PVC thermoforming sheet matirial na transparent ɔ kala polyvinyl klorayd matirial we dɛn mek fɔ sof ɔnda kɔntrol ɔt ɛn fɔm oba mold we de yuz vaykum, prɛshɔn ɔ mɛkanikal ɛp.

Afta dɛn dɔn fɔm ɛn kol, di matirial kin kip di shep we dɛn dɔn mol ɛn dɛn kin trim am, panch am, print am, wɛldɔm am, sial am ɔ gɛda am insay di pak ɔ kɔmpɔnɛnt we dɔn dɔn.

na 1mm tik, di sheet matirial de gi big rigiditi εn impak protεkshכn pas tin fכm fכm blista film dεm εn i bεtε fכ dip trey dɛn , big blista, protεktiv shεl dεm εn fכm industrial pat dεm.

di mεtirial dεn dεskrεb bak as klia had PVC film, rigid vaynil rol stכk, PVC vεkyum-fכm sheet matirial , transparent blista sheet matirial εn PVC tεmכfכm rol.

Super Transparent PVC Sheet we yu de yuz Imej dɛn

1mm Rigid PVC Sheet we de na di wɔl Spɛsifikeshɔn dɛn

Faynal spɛsifikɛshɔn fɔ no di tiknɛs tolɛreshɔn, wit tolɛreshɔn, rol lɔng, kɔr dayamita, rol wet, ɔdasay dayamita, wayndin dairekshɔn, sɔfays, kɔlɔ, ɔptik kwaliti ɛn aplikeshɔn gred.

Optik Kwaliti fɔ Supa Transparent PVC Sheet we yu de yuz

Di wɔd supa klia de diskrayb wan vijual transparent gred, bɔt prɔfɛshɔnal pɔchɛshɔn spɛsifikɛshɔn fɔ yuz mɛzhɔbal optik ɛn dɛfɛkt krayteria.

Tɛmofɔmin Pɔfɔmɛnshɔn

Yunifɔm Hɛtin

kכnsistεnt tik εn fכmyuleshכn de εp di sheet matirial hεt ivin akraos di fכm εria εn ridyus lokal כvastrεch.

Fɔm Windo

Di fכm tεmprachכ εn hεt tεm dipכnt pan di εksakεt PVC fכmyuleshכn, tiknes, hεta tεyp, mashin spid, mold disayn εn ambiεnt kכndishכn.

Sheet Sag we de na di wɔl

Kontrol sag impɔtant fɔ kɔnsistɛns matirial distribyushɔn. If yu sag pasmak, dat kin mek di wɔl nɔ ivin, we if yu nɔ ɔt am, dat kin mek yu nɔ fɔm ɔ strɛs.

Dip-Draw Pɔfɔmɛnshɔn

Dip kaviti ɛn shap kɔna kin nid plɔg ɛp, prɛshɔn fɔm, ɔptimayz mold rayus ɛn wan dediket ay-impakt fɔmyulashɔn.

Mold Rilis ɛn Denest

Surface slip, mold draft angle, texture ɛn stacking design de afɛkt if di pat dɛn we dɔn fɔm de rilis frɔm di mold ɛn separet smol smol we dɛn de pak.

Trim ɛn Panch

di sheet matirial we fכm fכ trim klin wan witout krak krak we dεn nכ kכntrol, bכr pasmak כ ed waytin.

1mm PVC Sheet we de na di wɔl Aplikeshɔn dɛn

• Ritayl blista pak: Tul, ilɛktronik, steshɔnari, hadwae, tɔys, kɔsmɛtik ɛn kɔsmɛtik prɔdak.

• Klamshɛl pak: Klia hinged ɔ tu-pies protɛktiv rital pak.

• Thermoformed trey dɛn : Indastrial pat, komponent, sampul ɛn prodak we nid rigid protɛkshɔn.

• Fɔ pak it: Tre ɛn kɔntena dɛn we dɛn mek frɔm wan gred we dɛn dɔn gri fɔ fɔ kɔntakt it.

• Mɛdikal-divays pak: Instrumɛnt trey dɛn ɛn protɛktiv kɔva dɛn we de yuz validet mɛdikal pak matirial.

• Displei kɔmpɔnɛnt dɛn: Klia mold kɔva, prɔmoshɔnal displei ɛn protɛktiv shel.

• Print ɛn fold: Transparent bɔks, winda, kɔva ɛn tin dɛn we dɛn print we yu de yuz wan gred fɔ print we fit.

Jɛnɛral, Fɔd, Mɛdikal ɛn Famasiutik PVC Gred

Standart PVC ɛn Ay-Baria PVC Strukchɔ dɛn

Fɔ ay-baria famasi aplikeshɔn, luk di HSQY PVDC -kot PVC film rεnj.

PVC vs. PET , PETG ɛn HIPS fɔ Tɛmofɔmin

Speshal PVC Tɛmofɔmin Gred dɛn

Standard transparent PVC nɔ fɔ ɔtomɛtik diskrayb as antistatik, fɔ ɔltɛm UV-rɛsistant ɔ fayapruf.

Di Tin dɛn we Yu fɔ Du fɔ Kɔntakt fɔ it

Wan rigid PVC sheet matirial we dɛn mek fɔ pak it fɔ yuz fɔmyulashɔn we fit fɔ di dɛstineshɔn makit ɛn di kɔndishɔn dɛn we dɛn want fɔ pak it.

Di pɔsin we bay fɔ no di kayn it, di kɔntakt tɛmpracha, di tɛm we i fɔ kɔntakt, di frij ɔ ambiɛnt stɔrɔj ​​ɛn if di paket go kɔntakt di it dɛn we gɛt fat, asid, alkol ɔ wata.

Di dɔkyumɛnt dɛn we dɛn nid kin inklud fɔd-kɔntakt diklareshɔn, maykreshɔn tɛst ripɔt, rɛsin diklareshɔn ɛn ristrikt-sɔbstans dɔkyumentri.

Dɛn fɔ diskrayb wan SGS ripɔt akɔdin to di ɛksaktɔl tɛst dɛn we dɛn dɔn kɔmplit ɛn dɛn nɔ fɔ prɛzɛnt am as yunivasal fud-sefty sɛtifiket.

Medikal-Divays Pakɛj Rikwaymɛnt dɛn

Medikal-divays pak nid mɔ pas klia apinans ɛn thermoformability.

Di matirial ɛn di fɔm tre fɔ evaluate as pat pan di kɔmplit pak sistɛm, inklud lidding matirial, sil trɛnk, pak intɛgriti, sterilayzeshɔn we, transpɔt ɛn shelf layf.

εtilin oksayd, gama, εlektrכn-bim εn plasma stεrilayzεshכn kin afekt difrεn PVC fכmyuleshכn dεm difrεnt wan. di kompitibiliti fכ kכnfכm fכ di εksakεt grεd εn dכz.

Di kɔstɔma stil gɛt di wok fɔ validet di fayn steril-baria ɛn mɛdikal-divays pak sistɛm.

Kwaliti-Kɔntrol Tɛst dɛn we Dɛn Rikɔmɛnd

• PVC resin, aditiv ɛn fɔmyulashɔn verifyeshɔn.

• Tiknes ɛn transvas tiknɛs profayl.

• Rol wit, sheet matirial dimɛnshɔn ɛn dayagɔnal tolɛreshɔn.

• Rol lɔng, nɛt wet, kɔr dayamita ɛn ɔdasay dayamita.

• Winding dairekshɔn, winding tɛnsiɔn ɛn tɛliskɔp.

• Layt transmishɔn, haz, klia, tint ɛn glos.

• Blak spat, fish yay, jel, bɔbul ɛn flɔ mak.

• Surface skrat, kɔntaminɛshɔn ɛn ed damej.

• Tensile strength, elongation, stiffness ɛn impak pefɔmɛns.

• Longitudinal ɛn transvas ɔt shrinkage.

• Tɛrmofɔmin winda, sheet matirial sag ɛn ɔt yunifɔmiti.

• Draw dip ɛn fɔm wɔl-tiknɛs distribyushɔn.

• Mold rilis ɛn fɔm-pat denest.

• Panching, trim ɛn ed kwaliti.

• Printing, welding ɛn siling kɔmpatibiliti usay nid de.

• Antistatik, UV ɔ flaym tɛst fɔ spɛshal gred dɛn.

• Fɔd-kɔntakt, famasi ɔ mɛdikal dɔkyumentri rivyu.

• Inspekshɔn fɔ pak, palet ɛn kɔntena-lod.

Kastom Rigid PVC Tɛmofɔmin Opshɔn dɛn

• Fichu 1mm rigid PVC sheet matirial .

• Tiknes we dɛn kɔstɔmayz frɔm lɛk 0.15mm to 5mm.

• Masta rol, slit rol, flat sheet matirial s ɛn kɔt pis.

• Customized rol width, rol length ɛn rol wet.

• Kastomized pepa-kɔr dayamita ɛn winding dairekshɔn.

• Supa klia, layt-blu klia, wayt, opaque ɛn kɔstɔm kɔlɔ dɛn.

• Glossy, mat, frosted ɛn ɛmbos sɔfays dɛn.

• Jɛnɛral vaykum-fɔmin ɛn dip-drɔ gred dɛn.

• Fɔd-kɔntakt ɛn famasi pak gred dɛn.

• Medikal-divays tre gred dɛn.

• Antistatik, UV-stabiliz ɛn flaym-rɛtardant gred dɛn.

• Slitin, sheet matirial ing, protɛktiv film ɛn kɔstɔmayz ɛkspɔt pak.

Infɔmeshɔn we dɛn nid fɔ wan PVC Sheet we de na di wɔl Kɔt

• Tik ɛn tolɛreshɔn we dɛn nid.

• Rikwayd rol wit ɔ sheet matirial dimɛnshɔn.

• Rol, sheet matirial ɔ kɔt-pies saplai fɔmat.

• Rol lɔng, rol wet ɛn pepa-kɔr dayamita.

• Klia, blu-tinted, opaque ɔ kɔstɔmayz kɔlɔ.

• Glos, mat, frɔst ɔ ɛmbos sɔfays.

• Rikwayd layt transmishɔn, haz ɛn visual difɛkt limit.

• Finished prodak ɛn fɔm dip.

• Thermoforming-machine tayp ɛn di we aw dɛn de ɔt.

• Mold dimɛnshɔn, draft angul ɛn kaviti dip.

• Rikwayd impak, stiffness ɛn shrinkage pefɔmɛns.

• Printin, wɛldin, ɔt silin ɔ laminɛshɔn prɔses.

• Fɔd, famasitik, mɛrɛsin ɔ industrial aplikeshɔn.

• Antistatik, flaym ɔ UV prɔpati dɛn we dɛn nid.

• Destination market ɛn di dɔkyumɛnt dɛn we dɛn nid.

• Initial kwantiti ɛn ɛstimat ɛni ia dimand.

• Pak, destineshɔn pɔt ɛn delivri de.

Send Yu PVC Tɛmofɔmin Rikwaymɛnt dɛn

Pakɛj ɛn Delivri

Sampul pak: A4 sheet matirial s ɛn kɔt sɛmpul dɛn kin pak insay protɛktiv bag ɛn kɔriɔ katon.

Rol pak: Rifrɛns rol wet na lɛk 50kg, wit kɔstɔmayz rol wet dɛn we de akɔdin to tik, wit ɛn ikwipmɛnt.

Rol protɛkshɔn: Dɛn kin rap rol wit PE film, kraft pepa, watapruf film ɛn edj protɛkshɔn.

Shit pak: Flat sheet matirial s kin pak insay PE bag, kraft pepa ɛn rigid ɛkspɔt palet.

Palet pak: Rifrεns palet wet na lεk 500-2000kg dipכnt pan prodak fכmat εn hεndlin limit.

Kɔntena lod: Rifrɛns lod na lɛk 20 tan, we de ɔnda di rol dimɛnshɔn, palet dizayn, kɔntena volyum ɛn ligal wet ristrikshɔn.

Lid tɛm: Standart prodakshɔn jɔs nid lɛk 7-15 dez afta spɛsifikɛshɔn, sampul, pak ɛn dipɔsit kɔnfɔmeshɔn.

PVC Sefty Data Shit

Di PVC sefty data sheet matirial we de naw, dɛn kip am dɔŋ fɔ rɛfrɛns.

Bifo yu yuz di dɔkyumɛnt fɔ bay, ɔdit ɔ rigyuletɔri sɔbmishɔn, kɔnfɔm se di kɔmni nem, di prɔdak mɔdel, fɔmyulashɔn, tiknɛs, wit, aditiv ɛn di de we dɛn gi am, mach di ɛksaktɔl matirial we dɛn de saplae.

Daunlod PVC MSDS we dɔn de

Sɛtifiket ɛn Tɛst Dɔkyumɛnt dɛn

Di dɔkyumɛnt dɛn we de kin gɛt di prɔdak spɛsifikɛshɔn, sefty data sheet matirial s, fizik-prɔpati ripɔt, ristrikt-sɔbstans ripɔt, it-kɔntakt ripɔt ɛn kwaliti-mɛnejmɛnt sɛtifiket.

Ɛni dɔkyumɛnt fɔ verify agens di ɛksaktɔl PVC gred, fɔmyulashɔn, kɔlɔ, tiknɛs, prodakshɔn sayt ɛn aplikeshɔn.

Di pɔsin we gɛt di sɛtifiket, di standad ɛdyushɔn, di skɔp ɛn di validiti tɛm fɔ ɛni manejmɛnt-sistim sɛtifiket fɔ chɛk bifo dɛn pablish am.

HSQY Globɛl Ɛgzibishin dɛn

Wetin Mek Yu Pik HSQY as Yu Rigid PVC Sheet we de na di wɔl Spɔla?

• Fichu 1mm supa-klia rigid PVC sheet matirial .

• Rol, sheet matirial ɛn kɔt-to-sayz saplai fɔmat dɛn.

• Tiknes, wit, kɔlɔ ɛn sɔfays dɛn we dɛn kɔstɔmayz.

• Vakum-fɔm ɛn dip-drɔ matirial opshɔn dɛn.

• Fɔd, mɛdikal, famasitik ɛn industrial gred dɛn.

• Optik ɛn fizik kwaliti-kɔntrol sɔpɔt.

• Sampul fɔ fɔm, trim, print ɛn sial tɛst.

• Kastom rol wet, kor dayamita ɛn winding dairekshɔn.

• Protektiv pak, palet ɛn intanashɔnal shiping.

• Teknik-dokumɛnt sɔpɔt bays pan di gred we yu dɔn pik.

Bifo bulk prodakshɔn, HSQY rikɔmɛnd fɔ tɛst di PVC sheet matirial we dɛn dɔn pik pan di kɔstɔma in aktual tɛmfɔmin mashin, mold, trimin sistem ɛn finish pak layn.

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt 1mm Rigid PVC Sheet we de na di wɔl s

Wetin dɛn kin yuz 1mm rigid PVC sheet matirial fɔ?

I de yuz fɔ thermoformed trey dɛn , big blista pak, klamshɛl, klia protɛktiv shel, rital pak, displei kɔmpɔnɛnt ɛn industrial fɔm pat.

Di fichu prodakt ekzakli 1mm tik?

Yɛs. Di fichu spesifikeshɔn na 1mm, we ɔda tiknes dɛn kin kɔstɔmayz.

Yu tink se 1mm rigid PVC kin saplae insay rol?

Yes, i go bi se di wit we dɛn nid, di rol dayamita, di kɔr saiz, di wet we di rol gɛt ɛn di kɔndishɔn fɔ waynd. Waid ɔ rili ebi 1mm prodakt kin fit mɔ as sheet matirial s.

Us rol wit dɛn de?

Customized rol widths de te to aprɔksimatli 1280mm, we de ɔnda di tik ɛn prodakshɔn ikwipmɛnt.

Wetin supa klia PVC min?

I de tɔk bɔt wan gred we gɛt ay transparency we pɔsin kin si. Di prɛsis rikwaymɛnt dɛn fɔ difayn bay layt transmishɔn, haz, tint, glos ɛn difrɛns limit.

Na klia PVC komplitli kalalɛs?

Nɔto fɔ se na so i bi. transparent PVC kin gεt nyutral, layt-blu כ sכm wam tint dipכnt pan di fכmyuleshכn.

Rigid PVC kin bi vaykum fɔm?

Yɛs. Wan aprɔpriet rigid PVC gred kin vaykum fɔm afta ɔt ɛn prɔses ɔptimayzeshɔn.

Yu tink se yu kin yuz 1mm PVC fɔ dip drɔin?

I kin yuz fɔ dip shep dɛn we di matirial gred, mold rayus, itin profayl, plɔg ɛp ɛn drɔ rɛsɛshɔn fayn.

Us tɛmpracha fɔ mek di tɛmpracha dɛn fɔ yuz?

di korekt tεmprachכ dipכnt pan di fכmyuleshכn, tik, hita, mashin, mold εn saykl tεm. Fɔm trayal fɔ disayd di prodakshɔn winda.

PVC de shrink afta thermoforming?

Sɔm dimɛnshɔnal chenj kin apin we dɛn de ɔt ɛn kol. Longitudinal ɛn transvas shrinkage fɔ tɛst fɔ di gred we dɛn pik.

Rigid PVC kin panch ɛn day kɔt?

Yɛs. Yu kin yuz fayn tul fɔ panch, trim ɛn day kɔt afta dɛn dɔn fɔm.

Yu kin print klia PVC ?

Printin gred kin sɔpɔt ɔfset, skrin, UV ɛn sɛlɛkɛt dijital printin afta ink ɛn adheshon tɛst.

Yu tink se PVC sheet matirial s kin weld?

Suitabl PVC gred kin jɔyn bay ay-frikyuɛnsi, tɛmal ɔ ɔda kɔmpitabl wɛldin prɔses afta validɛshɔn.

Dis 1mm sheet matirial fayn fɔ tablɛt blista pak?

Standart tablɛt ɛn kapsul blista pak dɛn kin yuz tinna dediket famasitik fim dɛn. Wan 1mm sheet matirial na in dɛn kin pik mɔ fɔ tik trey dɛn ɛn protɛktiv fɔm pak.

Di PVC sheet matirial sef fɔ pak it?

Na wan gred nɔmɔ we dɛn dɔn gi fɔ kɔntakt it wit dɔkyumɛnt dɛn we fit di makit usay dɛn de go ɛn di kɔndishɔn dɛn we dɛn fɔ yuz.

Yu tink se vajin PVC kin mit di tin dɛn we pɔsin nid fɔ gɛt fɔ it wit it ɔtomɛtik wan?

Nɔ, di kɔmplit fɔmyulashɔn, inklud stebyulayza, prɔsesin ɛd, pigmɛnt ɛn ɔda aditiv, fɔ fayn fɔ di aplikeshɔn.

Yu tink se dɛn kin yuz dis tin fɔ pak tin dɛn we nɔ gɛt wan sik?

Yu kin yuz wan mɛdikal pak gred afta dɛn dɔn validet di kɔmplit steril-baria sistɛm, fɔm, sial, sterilayz ɛn shelf layf.

Na standad PVC na ay-baria fim?

Standard monolayer PVC nɔ fɔ trit am lɛk yunivasal ay-baria film. PVDC -coated PVC ɔ PVC /PCTFE strɔkchɔ dɛn kin nid fɔ sɛnsitiv prodak.

Na standad transparent PVC antistatik?

Nɔ. Antistatik pefɔmɛns nid fɔ gɛt wan dediket fɔmyulashɔn ɛn wan spɛsifikɛd sɔfa-rɛsistɛns rɛnj.

Di PVC sheet matirial UV resistant?

Nɔ fɔ tek lɔng tɛm UV pefɔmɛns. Ɔda aplikeshɔn dɛn nid fɔ gɛt UV-stabilized gred ɛn wɛda tɛst rikwaymɛnt dɛn.

Rigid PVC nɔ de faya?

Nɔ plastic sheet matirial nɔ fɔ diskraib as kɔmplit fayapruf. Flame pefɔmans fɔ sɔpɔt bay wan tɛst fɔ di ɛksaktɔl fɔmyulashɔn ɛn tik.

Yu tink se dɛn kin mek di kɔlɔ ɛn di say we dɛn de yuz fɔ mek di tin dɛn we dɛn want fɔ du?

Yɛs. Dɛn kin ebul fɔ evaluate klia, opaque ɛn kɔlɔ prodak dɛn wit glos, mat, frɔst ɔ ɛmbos sɔfays.

Yu tink se fri sampul dɛn de?

A4 ɔ kɔt sɛmpul dɛn we dɔn de kin de we nɔ gɛt matirial chaj, we intanashɔnal kɔriɔ freyt na di kɔstɔma kin pe am nɔmal wan.

Wetin na di minimum ɔda kwantiti?

Di standad MOQ na aprɔksimatli 1000kg. Speshal gred, kɔlɔ ɛn kɔstɔmayz wit kin nid difrɛn kwantiti.

Wetin na di prodakshɔn lida tɛm?

Stɛndad prodakshɔn jɔs de tek lɛk 7-15 dez afta dɛn dɔn kɔnfyus di spɛsifikɛshɔn, sampul, pak ɛn dipɔsit.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?

Gi di tik, wit, rol ɔ sheet matirial fɔmat, kɔlɔ, sɔfa, fɔm dip, aplikeshɔn, spɛshal gred, kwantiti, pak ɛn ples fɔ go.

Get wan Kastɔm ​​Rigid PVC Sheet we de na di wɔl Kɔt

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae rigid PVC sheet matirial s, PVC blista film, famasitik pak film, PET thermoforming sheet matirial s, PP sheet matirial s ɛn kɔstɔmayz plastic matirial to intanashɔnal B2B kɔstɔma dɛn.

HSQY de sɔpɔt thermoforming kɔmni dɛm, pak kɔnvɔta dɛm, mɛdikal-divays pak manifakta dɛm, printa dɛm, importa dɛm ɛn distribyushɔn dɛm wit matirial sɛlɛkshɔn, sampul tɛst, kɔstɔmayz prodakshɔn, kwaliti inspekshɔn ɛn ɛkspɔt pakej.

Rikwest fɔ kot di prayz ɛn Sampul