PVC Plastic Roll na Thermoforming Nuɖuɖu ƒe agbalẽvi

PVC Thermoforming Film na Nuɖuɖu ƒe Nubablɛwo

HSQY wɔa PVC thermoforming film rolls sesẽ siwo me kɔ na nuɖuɖu trays, abolomeƒe ƒe bablawo, confectionery inserts, nu yeyewo ƒe nugoewo, clamshells, blister packs kple customized rigid packaging applications.

Nusi wotsɔ wɔe nye polyvinyl chloride film sesẽ aɖe si wowɔ hena dzoxɔxɔ, wɔwɔ kple eƒe lãɖeɖe le vacuum-wɔwɔ, nyaƒoɖeamenu-wɔwɔ kple nɔnɔme-yɔyɔ-nutrenu dɔwɔnuwo dzi.

Standard transparent film naa adzɔnuwo ƒe dzedzeme si me kɔ, dziɖuɖu ƒe sesẽme kple kakaɖedzi ƒe wɔwɔme ƒe dɔwɔwɔ na asitsatsa kple nuɖuɖu-babla dɔwo.

PVC roll sesẽ si wokafu ƒe didime anɔ abe 0.15mm va ɖo 1mm ene. Woate ŋu atsɔ nɔnɔme tiatia siwo ade 1.5mm ana le agbalẽ xatsaxatsawo me le kpeɖodzi na agbalẽ xatsaxatsa ƒe didime, bending radius, core strength kple asisiwo ƒe dɔwɔnuwo vɔ megbe.

Zi geɖe la, wotsɔa PVC-nu siwo le kpekpem wu siwo le agbalẽ siwo wota wu me la naa wo abe agbalẽ gbadzawo ene tsɔ wu be woatsɔ nuɖuɖu bablawo.

Roll ƒe kekeme tso abe 10mm va ɖo 1280mm ene li, le eƒe titrime, eƒe nugbɔ ƒe mɔɖeɖe, agbalẽ xatsaxatsa ƒe kpekpeme kple ewɔwɔ ƒe ŋutete nu.

Woate ŋu awɔ dzɔdzɔme film siwo me kɔ, siwo ƒe amadede nye blɔ, siwo me kɔ, siwo me mekɔ o eye woƒe amadede nye esiwo wowɔ ɖe ɖoɖo nu kple esiwo le keklẽm, siwo ƒe amadede nye matte alo esiwo me tsikpe le.

Nuɖuɖu-kadodo, mɔxexeɖedɔléle nu, nusi tsi tre ɖe teƒe ɖeka, nusi wotrɔ asi le le ŋusẽkpɔɖeamedzi ŋu, UV-si li ke, dzotsitsi kple mɔxenu ƒe dzesiwo li abe atike alo xɔtuɖoɖo vovovowo ene le dodokpɔ ƒe dzidzenu kple wo zazã si hiã nu.

Menye ɖetugbui leaƒe ƒe PVC aŋɔ zazã ɖeɖekoe ɖoa nuɖuɖu ƒe kadodo ƒe nyonyo anyi o. Ele be woaɖo kpe atike bliboa, nuɖuɖu ƒomevi, dzoxɔxɔ si woatsɔ aƒoe, ɣeyiɣi didi si woatsɔ aƒoe kple afisi woayi-asi ƒe nudidiwo dzi.

Dzro nu bliboa me HSQY sesẽ PVC agbalẽ kple film ƒe hatsotso na nuɖuɖu babla, agbalẽtata, thermoforming kple dɔwɔƒewo ƒe dɔwɔwɔ.

Bia PVC Film ƒe Asixɔxɔ    Bia Thermoforming Kpɔɖeŋuwo

PVC Plastic Roll Nusiwo Wowɔ ƒe Video

Kpɔ video si le ete be nàto HSQY sesẽ PVC film rolls kple dzoxɔxɔ ƒe dɔwɔwɔ siwo do ƒome kplii me.

PVC Thermoforming Film Nɔnɔmetata siwo me kɔ

Nukae Nye Rigid PVC Thermoforming Film?

Rigid PVC thermoforming film nye polyvinyl chloride nusi sesẽ afã alo sesẽ si wotsɔna naa le agbalẽ xatsaxatsa siwo yia edzi me hena dzoxɔxɔ kple ewɔwɔ wòzu nubablɛwo ƒe dowo.

To vovo na PVC cling film si te ŋu trɔna bɔbɔe la, plasticizer si woɖo koŋ tsɔ kpe ɖe eŋu boo o alo kura mele eme o le atike si wotia nu eye wòléa agba alo agbalẽvi si wowɔ ƒe nɔnɔme me ɖe asi.

Woateŋu atrɔ asi le film la ŋu wòazu tray, clamshells, blister cavities, inserts, lids kple packaging components to vacuum, pressure alo mechanical forming zazã me.

Dɔwɔwɔ mamlɛtɔ nɔ te ɖe PVC resin, stabilizer ɖoɖo, ŋusẽkpɔɖeamedzi modifier, dɔwɔwɔ kpekpeɖeŋu, colorant, titrime mɔɖeɖe, extrusion alo ɣletigbalẽ ƒe nɔnɔmewo kple wɔwɔ dɔwɔnuwo.

PVC Nuɖuɖu ƒe Babla Film ƒe Nɔnɔmewo

Ele be nɔnɔme mamlɛawo nade dzesi ŋkɔ me titrime, mɔɖeɖe ɖe nu ŋu, kekeme, agbalẽ xatsaxatsa ƒe didime, agbalẽ xatsaxatsa ƒe kpekpeme, nu vevi ƒe didime, ʋuʋudedi ƒe mɔfiame, amadede, anyigba, nuɖuɖu-kadodo ƒe nɔnɔmewo kple wɔwɔme ƒe ɖoɖo.

Nu vevi siwo le Rigid PVC Thermoforming Film me

• Adzɔnuwo ƒe dzedzeme nyuie: Dzeside siwo me kɔ na nuƒlelawo kple ŋkutsalawo te ŋu kpɔa nusi wobla ɖe agba me.

• Dzoxɔxɔ ƒe dɔwɔwɔ: Dzeside siwo sɔ ateŋu awɔ tray, do, nutsyɔnu kple clamshells tsitotsito.

• Sesẽme si dzi wokpɔna: Enaa xɔtuɖaŋu ƒe ŋutilã na nubablɛ sesẽ siwo le bɔbɔe.

• Agbalẽtata: Anyigba siwo wotia ate ŋu ado alɔ UV offset, screen kple digital tata.

• Amadede ƒe tɔtrɔ: Amadede siwo me kɔ, siwo ƒe amadede nye amadede kple esiwo me mekɔ o li.

• Anyigba ƒe nɔnɔme: Woate ŋu awɔ nusiwo le keklẽm, matte kple frosted ƒe nuwuwu.

• Tiatia si wotrɔ asi le ŋusẽkpɔɖeamedzi ŋu: Woate ŋu ato ŋusẽkpɔɖeamedzi ƒe dɔwɔwɔ si dzi ɖe edzi vɛ na dɔ siwo fa miamiamia alo esiwo bia nu geɖe.

• Tiatia si tsi tre ɖe mɔxexeɖedɔléle nu: Anyigbadzinuwɔwɔ alo nusi wotsɔ blae ate ŋu akpe ɖe agbalẽ xatsaxatsa ƒe ʋuʋu kple agbalẽ xatsaxatsa ƒe mama ŋu wòanyo ɖe edzi.

• Mɔxenu ƒe wɔwɔme tɔxɛwo: Woate ŋu ada PVDC alo mɔxenu ƒe ƒuƒoƒo bubuwo kpɔ ne mono PVC mesɔ gbɔ o.

Nuɖuɖu-Kadodo ƒe Sedziwɔwɔ ƒe Nudidiwo

Virgin PVC resin ɖeɖe meɖoa sedziwɔwɔ ɖe nuɖuɖu ƒe kadodo tẽ ŋu o.

Film ƒe wɔwɔme bliboa ƒe akpa aɖewoe nye nusiwo naa nuɖuɖua nɔa te, ami siwo wotsɔna trɔa asi le nu ŋu, nusiwo wotsɔna trɔa asi le nu ŋu, nusiwo wotsɔ wɔa dɔe, amadedewo kple nu bubu siwo wòle be woasɔ na nuɖuɖu ƒe kadodo ƒe nɔnɔme siwo woɖo be woawɔ.

Ele be nuƒlelawo nagblɔ nuɖuɖu ƒomevi, kadodo tẽ alo esi mele tẽ o, kadodo ƒe dzoxɔxɔ, kadodo ƒe ɣeyiɣi didime, nudzraɖoƒe ƒe dzoxɔxɔ, nu yɔyɔ ƒe ɖoɖo kple asi si woayi.

Ele be nubablɛ siwo wota alo esiwo wotsɔ lãgbalẽ wɔe hã nada ink, nusiwo wotsɔ blaa nu, nusiwo wotsɔna ƒoa nu ɖe ​​nu ŋu, nusiwo wotsɔna léa nu ɖe ​​nu ŋu, dzoxɔxɔ-nutrenu ƒe ƒuƒoƒo kple nutsyɔnu filmwo kpɔ.

Nuŋlɔɖi siwo sɔ ate ŋu anye sedziwɔwɔ ƒe gbeƒãɖeɖe, atikewɔwɔ ŋuti nyatakaka, ʋuʋu dodokpɔ ŋuti nyatakaka, resin ƒe mɔɖeɖe ŋuti nyatakaka kple dodokpɔ ŋuti nuŋlɔɖi siwo kpe ɖe eŋu.

PVC Dzoxɔxɔ ƒe Dɔwɔna

Woate ŋu awɔ dɔ tso PVC film sesẽ ŋu to vacuum wɔwɔ, nyaƒoɖeamenu wɔwɔ, plug-kpekpeɖeŋu wɔwɔ kple matched-mould wɔwɔ zazã me.

Zi geɖe la, wowɔa dodokpɔ gbãtɔ siwo wowɔna le agbalẽa ƒe dzoxɔxɔ si dzi wokpɔna me, gake ɖoɖo nyuitɔ nɔ te ɖe alesi wowɔe pɛpɛpɛ, eƒe titrime, dzoxɔxɔnamɔ̃ ƒe ƒomevi, dzoxɔxɔ ƒe ɣeyiɣi, aŋɔ kple ewɔwɔ ƒe duƒuƒu dzi.

PVC te ŋu sea dzoxɔxɔ si gbɔ eme. Dzoxɔxɔ fũ alo ɣeyiɣi si woatsɔ anɔ anyi fũ ate ŋu ana wòazu ɣie, aʋẽ, aƒo kuɖɔ, anyigba ƒe nɔnɔme nagblẽ, eƒe nu me mekɔ o eye mɔ̃a ƒe dɔwɔwɔ dzi naɖe akpɔtɔ.

Ele be dzoxɔxɔ nanɔ ɖeka to film la ƒe kekeme kple eƒe titrime dzi. Ele be woada asi ɖe aŋɔ ƒe yaƒoƒo, plug ƒe nɔnɔme, fafa kple lãɖeɖe ƒe nɔnɔmewo hã dzi.

Mono PVC kple High-Barrier Packaging Dɔwɔnuwo

Ele be nuƒlela siwo hiã be woanɔ anyi didi wu la nana oxygen-kaka ƒe agbɔsɔsɔme si woɖo, tsi-ya-ya-kaka ƒe agbɔsɔsɔme, nuɖuɖu ƒomevi, dzoxɔxɔ si wodzra ɖo kple nudzraɖoƒe ƒe agbenɔƒe si hiã.

Dzoxɔxɔ ƒe Nutrenu Kple Nutsyɔnu ƒe Ðekawɔwɔ

PVC-gbadzɛ siwo wowɔ la metrena le wo ɖokui si ɖe nutsyɔnu ƒe film ɖesiaɖe ŋu o.

Nutrenu ƒe dɔwɔwɔ nɔ te ɖe PVC ƒe anyigba, nutsyɔnu alo laminate, lidding-film nutrenu, nutrenu ƒe dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si wònɔa anyi, flange gbadzaa kple nuɖuɖu ƒe ɖiƒoƒo dzi.

• Kpɔ lidding-film ƒe wɔwɔme kple sealant layer dzi.

• Dzidze nutrenu ƒe gɔmedzedze ƒe dzoxɔxɔ kple dɔwɔwɔ ƒe fesre.

• Do peel ŋusẽ, gbagbã tsitretsitsi kple leak dɔwɔwɔ kpɔ.

• Da nutrenu ƒe dɔwɔwɔ kpɔ le fafa, tsikpe alo etsɔtsɔ yi teƒe bubu megbe.

• Do nutrenu kpɔ to ami, tsi, ƒuƒu alo ɖiƒoƒo bubu si wokpɔ mɔ na me.

• Kpe ɖe eŋu nenye be ehiã be woawɔ dɔ si woate ŋu axe mɔ na, ​​si woate ŋu aŋe alo aʋu bɔbɔe.

PVC Nuɖuɖu Packaging Film ƒe dɔwɔwɔ

• Abolomeƒe ƒe nubablɛwo: Klɔ tray, clamshells kple nusiwo wotsɔ dea abolo, bisiklet kple abolomenuwo me.

• Nuɖuɖuvivinuwo ƒe babla: Tsokolet, akpɔnɔ kple nunana-ɖaka me nusiwo wotsɔ dea eme.

• Nu yeyewo ƒe bablawo: Atikutsetse, amagbewo kple salad babla tiatia aɖewo siwo zãa nuɖuɖu ƒe kadodo ƒe dzesi si dzi woda asi ɖo.

• Nuɖuɖugoewo: Nuɖuɖugoe sesẽ siwo le bɔbɔe hena nudzraɖoƒe, fafɛ alo nusi wozãna koŋ.

• Clamshell packaging: Hinged transparent packs na asitsanuwo.

• Blister packaging: Clear formed packaging na nuzazãwo kple nuɖuɖu tiatia aɖewo.

• Nusiwo wotsɔ dea asitsaƒewo: Nusiwo wotsɔ dea nu me siwo me kɔ alo esiwo le amadede vovovowo me na atsyɔ̃ɖonuwo, fefenuwo, xɔtunuwo kple nunanawo.

• Nubablɛ siwo wota: Aɖaka alo abɔtawu siwo wotsɔ UV-offset kple screen-ta.

• Atikewɔwɔ me nubablɛwo: Atikewɔwɔ-nubablɛ ƒe dzeside tɔxɛ kple mɔnu si ŋu woda asi ɖo koe nàzã.

• Atikewo ƒe ʋuʋudediwo: PVC film si woɖo ɖi na atikewo ƒe dzesi ko.

Thermoforming Dɔwɔwɔ ƒe Nɔnɔmetatawo

Atikewɔwɔ Kple Atikewɔwɔ ƒe Nubablɛwo ƒe Dzesidewo

Mele be woazã nuɖuɖu-babla siwo wozãna ɖaa alo dɔwɔƒewo ƒe PVC film le wo ɖokui si na atikewo alo atikewɔwɔ me nubablɛ siwo me dɔlékui mele o o.

Atikewɔwɔ ƒe ʋuʋudedi film ate ŋu abia be woatsɔ aŋɔ kple kpeɖeŋutɔ ƒe ɖoɖo tɔxɛ aɖe, ewɔwɔ ƒe nɔnɔme si dzi wokpɔna, batch traceability, titrime dzi kpɔkpɔ, shrinkage dodokpɔ kple ɖekawɔwɔ kple lidding foil.

Atikewɔnuwo ƒe babla ate ŋu abia dzadzɛnyenye, vidzidzi ƒe ɖekawɔwɔ, nugbagbevi suesuewo dzi ɖuɖu, nutrenu ƒe kpeɖodzi, tsitsi ŋuti numekuku kple mɔ̃ tɔxɛ ŋuti nuŋlɔɖiwo.

Ele be woayɔ dɔbiagbalẽvi siawo ahada asi ɖe wo dzi ɖe vovo tso nuɖuɖu siwo wobla ɖe agba me ƒe sinima si wozãna ɖaa gbɔ.

PVC Film Tata Kple Eƒe Trɔtrɔ

Woate ŋu ata PVC film sesẽ, atso ku, aƒoe, axɔ dzesi, ablae eye wòablae na nubablɛ kple ɖeɖefiadɔwo.

Anti-Static, Anti-Blocking kple Ŋusẽkpɔɖeamedzi ƒe Dzesidewo

Dzobibi ƒe Nyawo Kple Wo Tsi Ðokuisi

PVC sesẽ ate ŋu aɖe ɖokuitɔdidi ƒe nɔnɔme afia, gake mele be woatsɔe be dzoxɔxɔ ƒe hatsotso tɔxɛ aɖe le atike ɖesiaɖe si wowɔ ŋu o.

Ele be woaɖo kpe dzomavɔ ƒe dɔwɔwɔ dzi to film ƒe dzeside, titrime, amadede, kpɔɖeŋu ƒe ɖoɖo kple dodokpɔ ƒe dzidzenu si sɔ pɛpɛpɛ zazã me.

Dodokpɔ si wowɔna le nusiwo wotsɔ wɔe ƒe ɖoɖo nu meɖoa dzo ƒe hatsotso si le nuɖuɖugo blibo, agba, ɖeɖefia alo nusi wowɔ vɔ ƒe hatsotso me o.

Dodokpɔ Siwo Wokafu be Woatsɔ Akpɔ Dzedzeme Dzi

• PVC resin kple atikewɔwɔ ƒe kpeɖodzi.

• Titrime kple titrime ƒe mɔɖeɖe ɖe nu ŋu.

• Roll ƒe kekeme, roll ƒe didime, roll ƒe kpekpeme kple core diameter.

• Winding mɔfiame, agbalẽ xatsaxatsa ƒe tete, didiƒekpɔmɔ̃ kple nugbɔ ƒe ɖoɖowɔwɔ.

• Density alo sheet-weight ƒe kpeɖodzinana.

• Nukpɔkpɔ le gaglãgbe, afu, keklẽ kple ɣie ƒe dzesi.

• Amadede kple amadede ƒe vovototo tso hatsotso ɖeka me.

• Teƒe yibɔwo, gelwo, kuɖɔwo, fliwo, ʋuʋudediwo kple ɖiƒoƒo.

• Tensile ŋusẽ, elongation kple impact dɔwɔwɔ.

• Mɔ̃-mɔfiame kple transverse-mɔfiame dzi ɖeɖe kpɔtɔ.

• Thermoforming dzoxɔxɔ fesre kple web sag.

• Forming goglome kple gli-titrime mama.

• Yellowing kple gbegblẽ le wɔwɔ vɔ megbe.

• Trimming, punching kple edge-cracking dɔwɔwɔ.

• Anti-blocking kple roll-release dɔwɔwɔ.

• Anyigbadzi tsitretsitsi na anti-static grades.

• Dzoxɔxɔ-nutrenu ƒe ŋusẽ kple package-leak dodokpɔ.

• OTR kple WVTR dodokpɔ le afisiwo mɔxenu ƒe dɔwɔwɔ hiã le.

• Ʋuʋu dodokpɔ bliboa kple esi le tẽ le afisi wòsɔ le.

• Agbalẽtata-ink ƒe adhesion kple ʋuʋu ƒe dodokpɔ.

• Packing, pallet kple nugoe-agbawo me dzodzro.

PVC Thermoforming Film Tiatia siwo wowɔ ɖe ɖoɖo nu

• PVC roll sesẽ ƒe titrime tso abe 0.15mm va ɖo 1mm ene.

• Agbalẽxatsaxatsa kpekpewo ƒe dzidzenu tiatia siwo ŋu woɖo kpee.

• Roll ƒe kekeme tso abe 10mm va ɖo 1280mm ene.

• Wotrɔ asi le agbalẽ xatsaxatsa ƒe didime, kpekpeme kple nu vevi ƒe didime ŋu.

• Dzɔdzɔme si me kɔ eye wòle blɔ-tinted transparent film.

• Opaque kple amadede ƒe film si wowɔ ɖe ɖoɖo nu.

• Anyigba siwo le keklẽm, matte kple frosted.

• Atike siwo wotsɔa nuɖuɖu ƒoa ƒui siwo ŋu nuŋlɔɖiwo le.

• Dzeside siwo tsi tre ɖe mɔxexeɖedɔléle nu kple esiwo tsi tre ɖe nusiwo nɔa teƒe ɖeka ŋu.

• Dzeside siwo kpɔa ŋusẽ ɖe ame dzi ŋutɔ eye womete ŋu nɔa te ɖe vuvɔ nu o.

• UV-si li ke kple esi me dzo mele o ƒe dzesiwo.

• PVC/PVDC kple mɔxenu ƒe xɔtuɖoɖo siwo wowɔ ɖe ɖoɖo nu.

• Nusiwo woate ŋu ata kple esiwo ŋu wofa nu ɖo.

• Wotrɔ asi le ŋkɔwo, kakɛwo, palletwo kple agbalẽɖoɖoɖa ƒe dzesiwo ŋu.

Nyatakaka Siwo Hiã Na PVC Film Quote

• Wobia be wòanye titrime kple mɔɖeɖe ɖe nu ŋu.

• Wobia tso agbalẽ xatsaxatsa ƒe kekeme kple nugbɔ ƒe mɔɖeɖe ɖe nu ŋu.

• Wobia tso agbalẽ xatsaxatsa ƒe didime, agbalẽ xatsaxatsa ƒe kpekpeme kple nu vevi ƒe didime.

• Winding mɔfiame kple maximum roll diameter.

• Amadede si me kɔ, si ƒe amadede nye blɔ, si me mekɔ o alo esi wowɔ ɖe ɖoɖo nu.

• Glossy, matte alo frosted anyigba.

• Dzoxɔxɔ ƒe dɔwɔnuwo kple ka ƒe duƒuƒu.

• Mould dzidzeme, cavity goglome kple draw ratio.

• Nuɖuɖu ƒe ƒomevi, dzoxɔxɔ si woate ŋu aƒo ka na kple eƒe agbenɔƒe.

• Nuɖuɖu ƒe kadodo ŋuti sedede kple nuŋlɔɖi siwo hiã.

• OTR, WVTR alo mɔxenu ƒe wɔwɔme si hiã.

• Lidding-film kple nutrenu ƒe nudidiwo.

• Anti-static, anti-blocking, ŋusẽkpɔɖeamedzi alo UV ƒe nudidiwo.

• Agbalẽtata, nutsyɔtsyɔ alo adhesive-bonding ƒe mɔnu.

• Gbãtɔ ƒe nudɔdɔ ƒe agbɔsɔsɔme kple ƒe sia ƒe ƒe didi si wobu.

• Packing, destination port kple ŋkeke si wobia be woatsɔe vɛ.

Ðo Wò PVC Film Nudidiwo ɖa

PVC Plastik Agbalẽxatsaxatsa MSDS

Wɔ PVC nu ƒe dedienɔnɔ ŋuti nyatakaka gbalẽvi si li si le ete la ƒe kɔpi.

MSDS naa nyatakaka siwo ku ɖe nuwo ƒe dedienɔnɔ ŋu le mɔ gbadza nu eye meɖoa nuɖuɖu ƒe kadodo ƒe sedziwɔwɔ, ʋuʋu ƒe dɔwɔwɔ alo alesi wòsɔ na nubablɛ ƒe dɔ tɔxɛ aɖe anyi le eɖokui si o.

   Wɔ PVC Plastik Roll MSDS ƒe kɔpi

Nubablɛwo Kple Wo Ðoɖoɖa

Kpɔɖeŋuwo babla: Woate ŋu atsɔ PE kotokuwo akpɔ A4 agbalẽwo kple kpɔɖeŋu sue siwo wotso ta eye woabla wo ɖe agbalẽɖoɖoɖaɖaka sesẽwo me.

Roll packing: Woate ŋu atsɔ ametakpɔnu PE film kple kraft pepa abla PVC rolls le agbalẽ xatsaxatsa ƒe didime kple ʋuɖoɖo ƒe nudidiwo nu.

Nu veviwo takpɔkpɔ: Woate ŋu akpɔ pepa ƒe nu veviwo kple agbalẽ xatsaxatsa ƒe nugbɔwo ta be woaɖe woƒe ŋeŋe kple nugbɔ ƒe gbegblẽ dzi akpɔtɔ.

Pallet packing: Woate ŋu abla agbalẽ xatsaxatsawo ɖe tsitrenu alo le tsia dzi le pallet siwo wotsɔ ɖoa ​​duta dzi le agbalẽ xatsaxatsa ƒe kekeme, kpekpeme kple asisiwo ƒe dɔwɔwɔ ƒe dɔwɔnuwo nu.

Nudzraɖoƒe: Dzra film la ɖo ɖe xɔ me le teƒe si le dzadzɛ, si me tsi mele o eye ya le eme, si didi tso ɣe ƒe keklẽ tẽ, dzoxɔxɔtsoƒewo kple nyaƒoɖeamenu si gbɔ eme si woatsɔ aƒoe ɖe wo nɔewo dzi gbɔ.

Ɣeyiɣi si woatsɔ akplɔe ɖo: Zi geɖe la, ewɔwɔ si sɔ la bia abe ŋkeke 7-15 ene le nyatakaka, kpɔɖeŋu, deposit kple packing kpeɖodzi megbe.

Ðaseɖigbalẽwo Kple Sedziwɔwɔ Ŋuti Nuŋlɔɖiwo

Nuŋlɔɖi siwo li ate ŋu anye mɔ̃ɖaŋu ŋuti nyatakaka gbalẽviwo, dedienɔnɔ ŋuti nyatakaka gbalẽviwo, atikewɔmɔnu ŋuti nyatakakawo, ʋuʋu ŋuti nyatakakawo, atike siwo ŋu seɖoƒe le ŋuti nyatakakawo kple nyonyome dzikpɔkpɔ ƒe ɖaseɖigbalẽwo.

Ele be woaɖɔ SGS le dodokpɔ si tututu wowɔ nu eye mele be woatsɔe afia be enye xexeame katã ƒe nuɖuɖu ƒe dedienɔnɔ ŋuti ɖaseɖigbalẽ o.

ISO 9001 ku ɖe adzɔnuwɔƒea ƒe nyonyome-dzikpɔkpɔ ƒe ɖoɖoa ŋu eye meɖoa nuɖuɖu-kadodo, mɔxenu, nutrenu alo dzoxɔxɔ ƒe dɔwɔwɔ anyi le eɖokui si o.

ISO 9001:2008 nye dzidzenu si woɖe le eme. Ele be woaɖo kpe ɖaseɖigbalẽa tɔ fifia, adzɔnuwɔƒe ƒe adrɛs, tata si wozãna ɖaa, ɖaseɖigbalẽa ƒe lolome kple ɣeyiɣi si woatsɔ awɔ dɔe dzi hafi woatae.

Ele be nyatakaka ɖesiaɖe nasɔ kple PVC ƒe wɔwɔme tututu, eƒe titrime, amadede, afisi wowɔe le kple nɔnɔme siwo woɖo be woaka ɖe nuɖuɖu ŋu.

HSQY Xexeame Katã ƒe Nukpɔkpɔwo

Nukatae Nàtia HSQY be wòanye Wò PVC Film Dɔwɔƒe?

• Rigid PVC thermoforming film agbalẽ xatsaxatsawo na babla wɔwɔ.

• Wokafu agbalẽ xatsaxatsa ƒe titrime tso abe 0.15mm va ɖo 1mm ene.

• Roll ƒe kekeme va ɖo abe 1280mm ene.

• Dzeside siwo me kɔ, siwo ƒe amadede nye blɔ, siwo me mekɔ o eye woƒe amadede nye esiwo wowɔ ɖe ɖoɖo nu.

• Glossy, matte kple frosted anyigba ƒe tiatia.

• Atike siwo wotsɔa nuɖuɖu ƒoa ƒui siwo ŋu nuŋlɔɖiwo le.

• Anti-blocking, anti-static kple ŋusẽkpɔɖeamedzi gã tiatia.

• Mɔxenu, xɔ siwo woate ŋu ata kple esiwo ŋu wofa nu ɖo.

• Kpɔɖeŋuwo na wɔwɔ, nutrenu kple nubablɛ dodokpɔwo.

• Trɔ asi le agbalẽ xatsaxatsa kpekpeme, nu vevi, winding kple pallet packing.

• Dukɔwo dome B2B wɔwɔ kple eɖoɖo ƒe kpekpeɖeŋu.

Hafi woawɔe le agbɔsɔsɔ gã me la, HSQY ɖo aɖaŋu be woado film si wotia la kpɔ le asisi la ƒe dzoxɔxɔ ƒe mɔ̃ ŋutɔŋutɔ, aŋɔ, nutsyɔnu film, nutrenu dɔwɔnuwo kple nuɖuɖu siwo wobla ɖe agba me dzi.

Te ɖe HSQY ŋu hena Kpɔɖeŋuwo kple Asixɔxɔ

Nya Siwo Wobiaa Enuenu Tso PVC Thermoforming Film Ŋu

Nukae nye PVC thermoforming film sesẽ?

Enye PVC nu sesẽ si wotsɔna naa le agbalẽ xatsaxatsawo me eye wowɔe be woado dzoe eye woawɔe wòazu tray, clamshells, blisters, inserts kple nubablɛ bubuwo.

Ðe PVC film sesẽ la sɔ kple PVC cling filma?

Ao, dzoxɔxɔnu sesẽ film léa eƒe nɔnɔme si wowɔ la me ɖe asi, gake PVC cling film ya fa, te ŋu trɔna bɔbɔe eye wowɔe na nusiwo wotsɔ blaa nu.

Titrime kawoe wokafu na PVC agbalẽ xatsaxatsawo?

PVC roll sesẽ si wokafu ƒe didime anɔ abe 0.15mm va ɖo 1mm ene. Gauge siwo kpekpe wu hiã be woaɖo kpe edzi ɖe vovo.

Ðe woate ŋu ana 6mm PVC abe agbalẽ xatsaxatsa enea?

Zi geɖe la, woatsɔ PVC si ƒe titrime le alea ana abe agbalẽ gbadza ene tsɔ wu be woatsɔe anae abe agbalẽ xatsaxatsa ene.

Agbalẽxatsaxatsa ƒe kekeme kawoe li?

Kekeme siwo wowɔ ɖe ɖoɖo nu tso abe 10mm va ɖo 1280mm ene li, le eƒe titrime kple ewɔwɔ ƒe kpeɖodzi nu.

Ðe ɖetugbui leaƒe PVC film nuɖuɖu ɖesiaɖe le dediea?

Ao, nuɖuɖu ƒe kadodo ƒe nyonyo nɔ te ɖe atike bliboa, nuɖuɖu ƒomevi, dzoxɔxɔ, ɣeyiɣi didi si woatsɔ aƒoe kple afisi woayi-asi ƒe nudidiwo dzi.

Ðe SGS ƒe nyatakaka aɖe ɖo kpe nuɖuɖu ƒe kadodo dzi sewo dzia?

Ne nyatakakaa ƒo nu tso film ƒe wɔwɔme tututu, sedede si sɔ, nuɖuɖu ƒe nɔnɔmetatawo kple nɔnɔme siwo woɖo be woazã ŋu ko hafi.

Ðe ISO 9001 ɖo kpe edzi be PVC film nye nuɖuɖu dediea?

Ao, ISO 9001 ku ɖe adzɔnuwɔƒe aɖe ƒe nyonyomedzikpɔkpɔ ƒe ɖoɖo ŋu eye meɖoa nuɖuɖu ƒe kadodo kple amewo ƒe sewo anyi le eɖokui si o.

Ðe woate ŋu azã PVC film na nuɖuɖu siwo me ami lea?

Ele be woatsɔ atike siwo wowɔ kple ʋuʋu ƒe dodokpɔ siwo sɔ pɛpɛpɛ aɖo kpe nuɖuɖu siwo me ami le ƒe nyonyome dzi le dzoxɔxɔ kple nudzraɖoƒe ƒe nɔnɔme siwo woɖo me.

Ðe woate ŋu awɔ PVC film le vacuum mea?

Ɛ̃. Woate ŋu awɔ PVC ƒe hatsotso sesẽ si sɔ le vacuum me le dzoxɔxɔ ƒe nɔnɔme, aŋɔ, hehe ƒe xexlẽme kple fafa ƒe ɖoɖo si woɖo kpe edzi vɔ megbe.

Dzoxɔxɔ kae wozãna tsɔ wɔa PVC ƒe dzoxɔxɔ?

Dzoxɔxɔ nyuitɔ nɔ te ɖe atike si wowɔ, eƒe titrime, dzoxɔxɔnamɔ̃ kple dɔwɔnu si wotsɔ wɔa nu dzi. Ele be dodokpɔwo naƒo asa na dzoxɔxɔ si gbɔ eme si ate ŋu agblẽ PVC.

Nukatae PVC film trɔna zua ɣie ne wole ewɔm?

Dzĩ ate ŋu atso dzoxɔxɔ si gbɔ eme, dzoxɔxɔ ƒe ɣeyiɣi si gbɔ eme, mɔ̃a ƒe anyimanɔmanɔ didi alo dzoxɔxɔ ƒe liƒo si mesɔ gbɔ o gbɔ.

Ðe mono PVC nye film si me mɔxenu gãwo lea?

Mele be woaɖɔ mono PVC si wozãna ɖaa le eɖokui si be enye mɔxenu si me ɔksidzin alo tsi ƒe dzoxɔxɔ sɔ gbɔ ɖo o. Nudzraɖoƒe ƒe agbenɔƒe si dzi ɖe edzi ate ŋu abia be woatsɔ PVDC alo mɔxenu bubu.

Nukae nye PVC/PVDC film?

Enye PVC gɔmeɖoanyi film sesẽ si wofa alo wotsɔ PVDC ƒo ƒui be wòana tsi kple gas ƒe mɔxenu ƒe dɔwɔwɔ nanyo ɖe edzi.

Ðe woate ŋu atsɔ nutsyɔnu film atre PVC-gbawo nua?

Ẽ, ne PVC ƒe anyigba alo nutrenu ƒe ƒuƒoƒoa sɔ kple nutsyɔnu film si wotia eye woda asi ɖe nutrenu ƒe ɖoɖoa dzi.

Ðe woate ŋu ata PVC thermoforming filma?

Dzeside siwo sɔ ateŋu anye UV offset tata, screen print alo UV inkjet tata le adhesion, curing kple migration dodokpɔwo megbe.

Ðe PVC film si tsia tre ɖe teƒe ɖeka ŋu lia?

Ɛ̃. Woateŋu ato anti-static grades vɛ le tsitretsitsi ƒe didime si hiã, dodokpɔ ƒe nɔnɔmewo kple ɣeyiɣi didi si wɔa dɔ nyuie nu.

Nukae nye PVC film si tsi tre ɖe mɔxexeɖedɔléle nu?

Wotrɔ asi le anti-blocking film ŋu be wòaɖe ƒoƒo ɖe ƒuƒoƒo siwo te ɖe wo nɔewo ŋu dome dzi akpɔtɔ le wo ƒoƒo, nudzraɖoƒe kple nuɖuɖu nana le wo ɖokui si me.

Ðe PVC film te ŋu nɔa te ɖe UV nua?

Mele be woabu PVC si me kɔ si sɔ le eɖokui si be UV li ke o. Atikewɔwɔ tɔxɛ aɖe kple yame ƒe nɔnɔme ƒe nudidiwo hiã.

Ðe PVC sesẽwo tsia eɖokuia?

PVC-tike sesẽ aɖewo ɖea wo ɖokui tsitsi ƒe nɔnɔme fiana, gake ele be woaɖo kpe hatsotso si tututu woda ɖe hatsotsowo me dzi na grade kple titrime si wodo kpɔ.

Ðe woate ŋu azã PVC si sɔ na nuɖuɖu si wozãna ɖaa na atikewo ƒe ʋuʋudediwoa?

Ao, atikewo ƒe ʋuʋudediwo hiã film si woɖo ɖi na atikewo ƒe dzeside kple ɖoɖowɔwɔ, wɔwɔme kple nutrenu ƒe kpeɖodzi si sɔ.

Ðe woate ŋu azã PVC film si wozãna ɖaa atsɔ awɔ atikewo ƒe agba siwo me dɔlékui mele oa?

Atikewɔwɔ me nubablɛ siwo me dɔlékui mele o bia be woatsɔ atike-nubablɛ ƒe dzeside tɔxɛ aɖe aɖo wo ŋu eye woaɖo kpe dzadzɛnyenye, nutrenu, dɔlékuiwutikewo zazã kple tsitsi dzi.

Nukae nye nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake?

Dzɔdzɔme nufiame MOQ nye abe 1000kg. Amadede siwo wowɔ ɖe ɖoɖo nu, nutsyɔnu kple dɔwɔwɔ ƒe dzesiwo ate ŋu abia MOQ bubu.

Ðe PVC thermoforming ƒe kpɔɖeŋuwo lia?

A4 ƒe kpɔɖeŋu siwo li fifia, agbalẽ siwo wotso kple agbalẽ xatsaxatsa ƒe kpɔɖeŋu siwo seɖoƒe li na ate ŋu anɔ anyi. Dzeside siwo wowɔ ɖe ɖoɖo nu ate ŋu abia be woadoe kpɔ.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Zi geɖe la, ewɔwɔ si sɔ la bia abe ŋkeke 7-15 ene le esi woɖo kpe eƒe nɔnɔme, kpɔɖeŋu, nusi wotsɔ de eme kple eƒe babla dzi vɔ megbe.

Nyatakaka kawoe hiã hafi woate ŋu ayɔ nyayɔyɔ?

Na eƒe titrime, kekeme, agbalẽ xatsaxatsa ƒe nɔnɔmewo, nuɖuɖu ƒomevi, wɔwɔ ƒe ɖoɖo, mɔxenu ƒe nudidi, nutsyɔnu film, nudɔdɔ ƒe agbɔsɔsɔ, babla kple yiyi.

Na PVC Thermoforming Film ƒe Nyayɔyɔ

Ku ɖe HSQY Plastic Group ŋu

HSQY Plastic Group naa PVC thermoforming film sesẽwo, PVC agbalẽ siwo me kɔ, PET agbalẽwo, PP agbalẽwo, mɔxenu ƒe nubablɛwo kple plastic nusiwo wowɔ ɖe ɖoɖo nu na dukɔwo dome B2B asisiwo.

HSQY doa alɔ thermoforming dɔwɔƒewo, nuɖuɖu-nubablɛ wɔlawo, agbalẽtata dɔwɔƒewo, nubablɛ trɔlawo, importers kple mamalawo kple nu tiatia, kpɔɖeŋuwo, customized wɔwɔ, nyonyome me toto kple export packing.

Bia Nya Siwo Woagblɔ Kple Kpɔɖeŋu