11-Layer High Barrier Medikal Pakeging Film
HSQY 11-layer PA/ PP/EVOH/PE ay barɛri mɛdikal pak fim na wan multilayer kɔ-ɛkstrud fleksibul fim we dɛn mek fɔ mɛdikal divays, mɛdikal tɛkstayl ɛn ɔda sɛnsitiv wɛlbɔdi pak aplikeshɔn dɛn we nid ɔksijɛn barɛri, pankchɔ rɛsistɛns, mɛkanikal durabiliti ɛn ɔt-silin pefɔmɛns.
Di 11-layer strɔkchɔ na PA/TIE/PP/TIE/PA/EVOH/PA/TIE/PE/PE/PE . EVOH de gi di praymari ay ɔksijɛn-baria fɛnshɔn, PA de kɔntribyut tofnɛs ɛn pankchɔ rɛsistɛns, we PE ɛn PP layers de sɔpɔt fleksibiliti, mɔstɔ protɛkshɔn, silin ɛn prɔsesin pefɔmɛns.
Di tiknɛs dɛn we de na di fim de frɔm 0.03mm to 0.45mm , wit di wit dɛn we de rich 4000mm . Klia ɛn printabl kɔnfigyushɔn dɛn de fɔ di rayt pak we dɛn nid.
Wan izi-pil kɔnfigyushɔn de fɔ fayn mɛdikal pak aplikeshɔn dɛn. Faynal peel bihayvya dipen pan di siling layt, mating sabstret, sial temperechur, prɛshɔn ɛn dwɛl tɛm, so di kɔmplit pakej fɔ tɛst ɔnda di kɔstɔma in aktual pak kɔndishɔn.
PA/PP/EVOH Ko-Ekstrushɔn Film Vidio
11-Layer Mɛdikal Pakɛj Fim Imej dɛn
![11-layer PA PP EVOH PE ay barɛri mɛdikal pak film rol]( "11-Layer High Barrier Medical Packaging Film")
High barrier medikal pakej film rol
![11-layer PA PP EVOH PE koekstrud film strɔkchɔ]( "11-Layer Co-Extrusion Film Structure")
11-Layer Ko-Ekstrushɔn Strukchɔ
![ay barɛri kɔɛkstrushɔn film fɔ mɛdikal divays pak]( "Medical Device Packaging Film")
Aplikeshɔn fɔ Pakɛj Mɛdikal Divays
11-Layer PA/ PP/EVOH/PE Film Spɛsifikeshɔn dɛn
| di prɔpati dɛn |
Ditiɛl dɛn bɔt |
| Di Nem fɔ Prodak |
11-Layer High Barrier Medikal Pakeging Film |
| Mak |
HSQY we de wok |
| Tayp fɔ Prodakt |
Medikal Fleksibul Pakejin Film / Multilayer Ko-Ekstrushɔn Film |
| Bildin |
PA/TAI/PP/TAI/PA/EVOH/PA/TAI/PE/PE/PE |
| Nɔmba fɔ di Lay dɛn |
11 Laya dɛn |
| Barɛri Layer |
EVOH High Oksijen-Baria Layer |
| Tik we i tik |
0,03mm–0,45mm / 30–450μm |
| Maksimal Width we pɔsin kin gɛt |
4000mm na wan |
| Aw a luk |
Klia |
| Fɔ print |
Di Kɔnfigyushɔn we Yu kin Print De |
| Fɔnkshɔn fɔ Pil |
Izi-Pil Opshɔn; Kɔnfɔm Mating Substrate ɛn Sil Kɔndishɔn dɛn |
| Praymari Aplikeshɔn dɛn |
Medikal Divays ɛn Mɛdikal Tɛkstayl Pakɛj |
| Ɔda Aplikeshɔn dɛn |
Food Vacuum Packaging ɛn Retort Aplikeshɔn dɛn |
| Sterilayzeshɔn |
Sterilayzeshɔn Kɔmpatibiliti fɔ Kɔnfɔm fɔ di Film Gred ɛn Prɔses we dɛn dɔn pik |
| MOQ we gɛt fɔ du wit am |
1000 kg we yu de yuz |
Eksakt OTR, WVTR, sil trɛnk, pil fɔs, sterilayz kɔmpitibliti ɛn ɔda pefɔmɛns valyu dɛn dipen pan di fim gred we dɛn dɔn pik. Rikwest di aplikebul teknikol data bifo yu spɛsifa di film fɔ wan validet mɛdikal pak sistɛm.
Aw di 11-Layer Film Strukchɔ De Wok
Multilayer co-extrusion de alaw difrεn polimכr dεm fכ du difrεn fכnshכn dεm insay wan fleksibul film. Di HSQY 11-layεr strכkchכ de kכmbayn PA, PP, EVOH, PE εn tay layεr dεm.
| Material |
Men Rol in di Multilayer Strukchɔ |
| PA / Polyamid / Naylon |
I de gi tafnɛs, pankchɔ rɛsistɛns, fleks rɛsistɛns ɛn mɛkanikal protɛkshɔn. |
| EVOH we dɛn kɔl |
I de gi di prinsipal ay ɔksijɛn- ɛn gas-baria fɛnshɔn. |
| PP / Polipropilɛn |
Kontribyut mεkanikal, kεmikכl εn tεmral pεrformεns akɔdin to di fayn strכkchכ. |
| PE / Polietilen we dɛn kɔl |
Sɔpɔt fleksibiliti, mɔstɔ rɛsistɛns ɛn siling pefɔmɛns. |
| TIE Layers we de na di wɔl |
Bכnd כda we inkכmpatibl polimכr layεr dεm tכgeda insay di kכ-εkstrud strכkchכ. |
Wetin Mek Yuz EVOH insay Mɛdikal Pakɛj Fim?
EVOH de inkorpor insay mכltilayεr pak fכ ridyus כksijεn εn gas transmishכn. Dis kin impɔtant we wan mɛdikal divays, mɛdikal tɛkstayl ɔ pak kɔmpɔnɛnt sɛnsitiv to ɔksidɛshɔn ɔ ɔda envayrɔmɛnt ɛksplɔshɔn.
EVOH nכ de yuz in wan insay dis HSQY strכkchכ. I de protɛkt bay di PA, PP ɛn PE layers we de rawnd am, we de alaw di kɔmplit 11-layer kɔnstrɔkshɔn fɔ balans barɛri pefɔmɛns wit fleksibiliti, pankchɔ rɛsistɛns, silabiliti ɛn kɔnvɔyt pefɔmɛns.
Ki Ficha dɛn fɔ di Ay Barɛri Mɛdikal Pakɛj Fim
1. Ay Ɔksijɛn Barɛri
Di EVOH layt de gi strɔng rɛsistɛns to ɔksijɛn ɛn gas transmishɔn, we de sɔpɔt pak aplikeshɔn usay barɛri pefɔmɛns na impɔtant sɛlɛkshɔn faktɔ.
2. Pankchɔ Resistɛns
mכltipכl PA layεr dεm de εp fכ protεkt di paket εgεst pankshכn εn mεkanikal strεs we kכz fכ rigid כ irεgul shep mεdikal prodakt dεm we dεn de hεndl εn distribyut.
3. Bɔku layers Protɛkshɔn
Di 11-layer konstrakshɔn alaw fɔ distribyushɔn barɛri, mɛkanikal, silin ɛn mɔstɔ-protɛkshɔn fɛnshɔn dɛn akɔdin to spɛshal polima layers.
4. Hɛt-Silin Kapabiliti
Dɛn mek di fim fɔ yuz ɔt-siling. Faynal siling temperechur, prɛshɔn ɛn dwɛl tɛm fɔ establish yuz di ɛksaktɔ mating sabstret ɛn pak mashin.
5. Izi-Pil Opshɔn
Di prodak de makɛt fɔ izi-pil mɛdikal pak aplikeshɔn dɛn. Pil pefɔmans fɔ validet agens di aktual lidding ɔ mating matirial fɔ ajɔst di balans we dɛn nid bitwin di paket intɛgriti ɛn kɔntrol opin.
6. Klia Prodakt Visibiliti
Klia fim de alaw fɔ si di prɔdak we dɛn pak usay di pak dizayn nid fɔ si am.
7. Kɔnfigyushɔn we yu kin print
Di fim opshɔn dɛn we yu kin print kin sɔpɔt aydentifikeshɔn, instrɔkshɔn, branding ɛn ɔda pakej infɔmeshɔn akɔdin to di printin sistem we yu dɔn pik.
8. Waid Kastamayzeshɔn Rɛnj
Tiknes frɔm 30μm to 450μm ɛn wit we go rich 4000mm de gi fleksibiliti fɔ difrɛn pak mashin ɛn pakej dimɛnshɔn.
Izi-Pil Mɛdikal Pakɛj Film
Insay mɛdikal pak, izi fɔ pul nɔ fɔ min wik sial. Wan paket we dɛn kin pul nid inof sil intɛgriti we dɛn de handle, sterilayz, distribyushɔn ɛn stɔrɔj we i de alaw fɔ opin we dɛn kɔntrol na di say we dɛn de yuz am.
di kכntribyushכn dεm fכ di pil dipכnt pan di rilayshכn bitwin di film siling layεr εn di כpכsite sabstεrayt. So di wan dɛn we de bay fɔ gi di rayt mɛdikal pepa, Tyvek-tayp sabstret, fim, tre ɔ ɔda silin sɔfays we dɛn yuz na di paket we dɔn dɔn.
Sil Strɔng: Establish sufayf pakej intɛgriti fɔ di intended handlin ɛn distribyushɔn kɔndishɔn.
Pil Fos: Ditarmin di opin fos we yu nid akɔdin to di paket saiz ɛn di we aw yu want fɔ yuz am.
Klin Pil: Evaluate di sil intafeys fɔ fayv tear, delamination, stringing ɔ ɔda tin we nɔ fayn fɔ opin.
Sil Windo: Kɔnfɔm stebul silin pefɔmɛns akɔdin to di aktual tɛmpracha, prɛshɔn ɛn dwɛl-taym rɛnj we dɛn yuz na di pak layn.
Medikal Divays ɛn Mɛdikal Tɛkstayl Pakɛj Aplikeshɔn dɛn
High-barrier multilayer film kin evaluet fɔ mɛdikal pak projɛkt usay wan kɔmbayn gas barɛri, fizik protɛkshɔn, klia ɛn silabiliti nid fɔ de.
Medikal Divays: Fleksibul pak fɔ fayn divays dɛn we nid transparent barɛri protɛkshɔn ɛn mɛkanikal durabiliti.
Mɛdikal Tɛkstayl: Pakɛj fɔ fayn tɛkstayl-bɛs wɛlbɔdi prɔdak usay dɛn dɔn mek barɛri ɛn pak intɛgriti rikwaymɛnt.
Diagnostic Components: Dɛn kin ebul fɔ evaluate di high-barrier packaging fɔ sɛnsitiv components we nid fɔ protɛkshɔn agens ɔksijɛn ɔ envayrɔmɛnt ɛksplɔshɔn.
Thermoformed Medical Packs: Dɛn kin ebul fɔ evaluate multilayer film fɔ fɔm aplikeshɔn akɔdin to di fɔm dip we dɛn nid ɛn di ɛksaktɔ film gred.
Peelable Medical Packages: Dɛn kin evaluate fayn strɔkchɔ dɛn usay dɛn nid fɔ kɔntrol di peel opin wit wan kɔmpitabl siling sabstret.
High Barrier Film vs. Standart PA/PE Medikal Film
| Kɔmpiashɔn |
PA/ PP/EVOH/PE Ay Barɛri Film |
Standart PA/PE Film |
| Ɔksijɛn Barɛri |
EVOH de gi εnhans כksijεn-baria pεrformεns |
Lɔwa barɛri kɔmpia wit wan strɔkchɔ we gɛt EVOH |
| Strukchɔ Kɔmplisiti |
11-layer spɛshal multilayer strɔkchɔ |
Jɛnɛral wan simpul multilayer strɔkchɔ |
| Best Suited Fɔ |
Aplikeshɔn dɛn we nid fɔ gɛt strɔng ɔksijɛn-baria protɛkshɔn |
Aplikeshɔn usay ɛkstrim ɔksijɛn barɛri nɔ nid |
| Faynal Sɛlɛkshɔn |
Bays pan divays sɛnsitiviti, sterilayzeshɔn, barɛri ɛn shelf-layf rikwaymɛnt |
Bays pan pakej protɛkshɔn ɛn kɔst-pɔfɔmɛnshɔn rikwaymɛnt |
Sterilayzeshɔn Kɔmpatibiliti
Sterilization suitability dipεnd pan di sεlekt film gred εn di εksakεt prכsεsin mεtכd. di stεrilayzεshכn mεtכd we dεn nid, tεmprachכ, dכz εn prכsεsin saykl fכ provayd fכ kכmpatibiliti evalueshכn.
di mεdikal pak mεtirial dεm kin rεspכnd difrεnt to εtilin oksayd, rεdyushכn, stim εn כda stεrilayzεshכn prכsεs dεm. So dɛn fɔ evaluate di film ɛn kɔmplit paket we dɛn dɔn pik bay we dɛn yuz di ɛksaktɔl sterilayzeshɔn prɔses we dɛn bin dɔn mek fɔ di mɛdikal prodak we dɔn dɔn.
Sterilization Method: Gi EO, gamma, e-beam, stim ɔ ɔda prɔses we dɛn nid we yu de aks fɔ evalueshɔn fɔ di prɔdak.
Prɔses Kɔndishɔn dɛn: Gi tɛmpracha, ɛksplɔshɔn tɛm, redyushɔn doz ɔ ɔda aplikebul saykl paramita dɛn.
Sil Integriti: Evaluate di pakej sil bifo ɛn afta sterilayz.
Barɛri Ritɛnshɔn: Kɔnfɛm se di barɛri prɔpati dɛn we dɛn nid de stil akseptabl fɔ fala di sterilayzeshɔn prɔses we dɛn bin want.
Mɛkanikal Intɛgriti: Evaluate pankchɔ, fleks, delamination ɛn ɔda pakej risk dɛn afta dɛn dɔn prosɛs am.
Medikal Pakɛj Validɛshɔn ɛn ISO 11607
Fɔ di mɛdikal divays dɛn we dɛn dɔn stɛrilayz bad bad wan, di fleksibul fim na jɔs wan pat pan di pak sistɛm we dɔn dɔn. Dɛn fɔ ebul fɔ evaluate di matirial sɛlɛkshɔn, fɔm, sial, sterilayz, distribyushɔn ɛn stɔrɔj togɛda.
ISO 11607 adrɛs matirial, steril barɛri sistem ɛn pak sistɛm we dɛn yuz fɔ tɛminal sterilayz mɛdikal divays, ɛn bak validɛshɔn fɔ fɔm, silin ɛn asɛmbli prɔses.
Matirial Kwalifayeshɔn: Kɔnfɛm se di fim we yu dɔn pik fit fɔ di divays we yu want, di kɔnfigyushɔn fɔ pak ɛn di we aw dɛn de sterilayz.
Sil Prɔses Divɛlɔpmɛnt: Establish fayn tɛmpracha, prɛshɔn ɛn dwɛl-taym paramita dɛn.
Pakɛj Intɛgriti: Asɛs di sil ɛn di paket intɛgriti bifo ɛn afta sterilayz.
Distribushɔn Tɛst: Evaluate di finish pakej sistɛm afta simul transpɔt ɛn handlin usay i apɔynt.
Ol: Kɔnfɔm di we aw dɛn pak di tin dɛn de wok tru di program we dɛn bin want fɔ mek di shelf-layf.
Aw fɔ Pik 11-Layer Mɛdikal Pakɛj Fim
Medikal Prodak: Gi di kayn prɔdak, di dimɛnshɔn, wet ɛn if i gɛt rigid ɔ shap kɔmpɔnɛnt dɛn.
Baria Rikwaymɛnt: Gi target OTR, WVTR ɔ ɔda baria rikwaymɛnt we i de.
Film Tiknes: Selekt akɔdin to divays jɔyometri, fɔm dip, pankchɔ risk ɛn pakej trɛnk rikwaymɛnt.
Rol Width: Gi di rayt wit we di pak we dɛn de pak di tin dɛn nid.
Mating Substrate: No di pepa, Tyvek-tayp matirial, film, tre ɔ ɔda say we di film go sial pan.
Pil Rikwaymɛnt: Spɛsify if kɔntrol izi pil, weld sil ɔ ɔda opin kwaliti nid fɔ de.
Sterilayzeshɔn: Gi di we aw dɛn want fɔ sterilayz ɛn di kɔndishɔn fɔ prosɛs.
Print: Gi di tin dɛn we yu nid fɔ print, ink sistem ɛn di say we dɛn print usay i pɔsibul.
Rigyuletɔri Dokumɛnt: Fɔ no di tɛknikal ripɔt dɛn we dɛn nid ɛn di tin dɛn we dɛn nid fɔ du na di ples-maket.
Infɔmeshɔn Nid fɔ Wan Fast Mɛdikal Fim Kɔt
1. Medikal divays ɔ mɛdikal tɛkstayl tayp
2. Rikwayd film tik
3. Di rol wit we dɛn nid
4. Ɔksijɛn ɔ mɔstɔ barɛri we dɛn nid
5. Mating silin sabstret
6. I izi-pil ɔ weld-sil rikwaymɛnt
7. Sterilayzeshɔn we ɛn saykl
8. Fɔm dip ɔ pakej dimɛnshɔn
9. Pak mashin brand ɛn mɔdel
10. Di tin dɛn we dɛn nid fɔ print
11. Teknik ɔ rigyuletɔri dɔkyumɛnt dɛn we dɛn nid
12. Kwantiti we dɛn nid
13. Di kɔntri we dɛn de go ɔ di pɔt usay dɛn de ship
Kwaliti ɛn Sɛtifiket Dokumɛnt
Medikal pak projɛkt dɛn kin nid fɔ gɛt prɔdak spɛsifikɛshɔn, barɛri tɛst data, mɛkanikal-prɔpati ripɔt, sterilayz kɔmpitibliti infɔmeshɔn, kwaliti-sistim dɔkyumentri ɛn ɔda makɛt-spɛsifi k rɛkɔd dɛn.
Rikwest dokumɛnt fɔ di ɛksaktɔ HSQY fim gred we dɛn de evalyu. Jɛnɛral kɔmni sɛtifiket dɛn nɔ fɔ ɔtomɛtik intaprit as mɛdikal pak validɛshɔn ɔ sɛtifiket fɔ wan patikyula finish steril barɛri sistɛm.
![HSQY ay barɛri mɛdikal pak fim sɛtifikeshɔn dɔkyumentri]( "HSQY Medical Packaging Film Documentation")
Intanɛshɔnal Ɛgzibishin dɛn
![HSQY 2017 Shanghai Egzibishin]()
2017 Shanghai Ɛgzibishin
![HSQY 2018 Shanghai Egzibishin]()
2018 Shanghai Ɛgzibishin
![HSQY 2023 Saudi Ɛgzibishin]()
2023 Saudi Ɛgzibishin
![HSQY 2023 Amɛrikan Ɛgzibishin]()
2023 Amɛrikan Ɛgzibishin
![HSQY 2024 Ɔstrelia Ɛgzibishin]()
2024 Ɔstrelia Ɛgzibishin
![HSQY 2024 Amɛrikan Ɛgzibishin]()
2024 Amɛrikan Ɛgzibishin
![HSQY 2024 Mɛksiko Ɛgzibishin]()
2024 Mɛksiko Ɛgzibishin
![HSQY 2024 Paris Egzibishin]()
2024 Paris Ɛgzibishin
Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm
Wetin na 11-layer PA/ PP/EVOH/PE mεdikal pak fim?
Na wan multilayer co-extruded fleksibul film we de kɔba PA, PP, EVOH, PE ɛn tay layers fɔ gi ɔksijɛn barɛri, mɛkanikal trɛnk, fleksibiliti ɛn siling pefɔmɛns fɔ fayn mɛdikal pak aplikeshɔn.
Wetin na di ekzak HSQY 11-layer strɔkchɔ?
Di HSQY 11-layer strɔkchɔ na PA/TIE/PP/TIE/PA/EVOH/PA/TIE/PE/PE/PE.
Wetin mek dɛn kin yuz EVOH fɔ mek fim we dɛn kin pak fɔ mek mɛrɛsin?
EVOH de gi ay ɔksijɛn- ɛn gas-barɛri pefɔmɛns. Insay dis multilayer strɔkchɔ i de wok togɛda wit PA, PP ɛn PE layers we de gi mɛkanikal protɛkshɔn, fleksibiliti, mɔstɔ rɛsistɛns ɛn siling funkshɔnaliti.
Us tik tik dɛn de?
di tik we de fכm de kכmכt frכm 0.03mm to 0.45mm, we ikwal to lεk 30–450μm.
Wetin na di maksimal fim wit?
Di maksimal wit we de na 4000mm.
Dis na fim we dɛn kin yuz fɔ pak mɛrɛsin we izi fɔ pul?
Wan kɔnfigyushɔn we izi fɔ pul de. Aktual peel pefomans dipכnt pan di opozit siling sabstεrayt εn siling prכsεs, so di peel trεnk εn opin bihayvya fכ tεst pan di finish pakej.
Dis fim kin sial to mɛdikal pepa?
Kɔmpatibiliti wit mɛdikal pepa dipen pan di ɛksaktɔl film silin layt ɛn pepa kɔtin. Gi di mɛdikal pepa spɛsifikɛshɔn so dat HSQY go ebul fɔ evalyu kɔmpitibliti pas fɔ tek am se ɛvri mɛdikal pepa go sial to di sem fim.
Di fim kin sial to Tyvek?
Tyvek siling kompitibiliti dipen pan di ekzak film silin layt ɛn Tyvek gred. Di wan dɛn we de bay fɔ gi di sabstret spɛsifikɛshɔn ɛn du sil-strɛng ɛn pil tɛst bifo dɛn yuz am fɔ kɔmɛshɔn.
Dis fim fayn fɔ sterilayz?
Sterilization kompitibiliti fɔ kɔnfyus fɔ di fim gred ɛn prɔses we dɛn dɔn pik. Gi di we aw dɛn nid fɔ sterilayz ɛn saykl so dat dɛn go ebul fɔ ebul fɔ no if i fit fɔ di paket we dɛn want.
Di film fit fɔ EO sterilization?
If EO sterilization nid fɔ de, aks fɔ di aplikebul tɛknikal infɔmeshɔn fɔ di film gred we yu dɔn pik ɛn validet di kɔmplit pakej ɔnda di aktual EO prɔses.
Di fim fayn fɔ gama ɔ e-bim sterilayzeshɔn?
di rεdyushכn kכmpatibiliti fכ kכnfכm fכ di sεlekt film gred εn di dכz we dεn nid. Rikwest aplikebul gama ɔ e-bim kɔmpatibiliti data bifo kwalifayeshɔn.
Dis fim de fala ISO 11607?
ISO 11607 de aplay to mɛdikal pak matirial, steril barɛri sistem ɛn pak-sistim prɔses. Dɛn fɔ evalyu di kɔmplians fɔ di matirial we dɛn de yuz ɛn di pak sistɛm we dɔn dɔn; i nɔ fɔ jɔs tek am frɔm di fim nem.
Us barɛri valyu dɛn di fim de gi?
Spɛsifi k OTR ɛn WVTR valyu dɛn dipen pan di ɛksaktɔ tiknɛs ɛn mɔltilayer strɔkchɔ. Rikwest di aplikebul teknikol data fɔ di film gred we de ɔnda evalueshɔn.
Yu tink se dɛn kin print di fim?
Yɛs. Di kɔnfigyushɔn dɛn we yu kin print de. Kɔnfɛm di we aw dɛn de print, di ink sistem ɛn di tin dɛn we dɛn nid fɔ sterilayz bifo dɛn prodyuz am fɔ kɔmɛshɔn.
Wetin na di MOQ?
Di minimum oda kwantiti na 1000kg.
A kin aks fɔ sampul fɔ mek dɛn tɛst mi paket?
Samplε kin de wit freyt we dεn kכlekt, sכbjεkt to spεsifikεshכn εn mεtirial we de. Gi di tik, waid, siling sabstret we yu nid, sterilayzeshɔn we ɛn pak aplikeshɔn fɔ kɔnfɔm wan aprɔpriet sampul.
Us infɔmeshɔn a fɔ gi fɔ kot?
Gi film tik, wit, mɛdikal prodak tayp, barɛri rikwaymɛnt, siling sabstret, pil rikwaymɛnt, sterilayz mɛtɔd, pak mashin, printin rikwaymɛnt, kwantiti ɛn dɛstineshɔn.
Wetin Mek Yu Pik HSQY fɔ Ay Barɛri Mɛdikal Pakɛj Fim?
Difayn 11-Layer Strukchɔ: PA/TIE/PP/TIE/PA/EVOH/PA/TIE/PE/PE/PE multilayer kɔnstrɔkshɔn.
High Barrier Option: EVOH de gi ɛnhans ɔksijɛn-baria pefɔmɛns fɔ sɛnsitiv pak aplikeshɔn dɛn.
Waid Dimɛnshɔn Rɛnj: Tiknɛs dɛn we de kɔba 0.03–0.45mm, wit wit we go rich 4000mm.
Izi-Pil Projɛkt Sɔpɔt: Dɛn kin ebul fɔ evaluate di siling ɛn peel rikwaymɛnt akɔdin to di aktual mating sabstret ɛn pak prɔses.
B2B Supply: HSQY de sɔpɔt mɛdikal pak manifakta, kɔnvɔta, distribyushɔn ɛn industrial pak projɛkt dɛn we nid kɔmɛshɔnal fim kwantiti.
Bɔt HSQY Plastik Grup
HSQY Plastik Grup de saplae multilayer co-extrusion film, medikal pak film, fleksibul pak matirial ɛn plastic prodak to intanashɔnal B2B kɔstɔma dɛn.
Fɔ 11-layer PA/ PP/EVOH/PE fim, ay-baria mɛdikal divays pak, mɛdikal tɛkstayl pak ɔ izi-pil mɛdikal fim prɔjek, sɛn HSQY yu tɛknikal spɛsifikɛshɔn, sterilayzeshɔn we, silin sabstret ɛn kwantiti fɔ ɛvalueshɔn ɛn kot.
