Farmasitik gred rigid PVC blister film

Farmasitik gred rigid PVC blister film

HSQY famasitik rigid PVC film na wan thermoformable fɔm wɛb we dɛn mek fɔ blista pak fɔ tablɛt, kapsul, pil ɛn ɔda stebul sɔlid-dos famasitik prodak dɛm. Di film de gi klia apinans, kɔntrol rigiditi, kɔnsistɛns fɔm pefɔmɛns ɛn kɔmpatibiliti wit fayn aluminiɔm push-thru lid fɔyl.

HSQY de saplae rigid famasitik PVC film in tiknes frɔm 0.15mm to 0.5mm, wit te to 1000mm ɛn rol dayamita te to 600mm. Kɔmɔn rɛfrɛns wit dɛn inklud 130mm ɛn 250mm, we slit wit, tik, rol dayamita, kɔr spɛsifikɛshɔn ɛn pak kin kɔstɔmayz akɔdin to di blista mashin ɛn aprɔv pak spɛsifikɛshɔn.

Wetin Na Famasiutik Rigid PVC Blister Film?

Famasiutik rigid PVC film na wan non-plasticized thermoplastic forming film we dɛn kin yuz as di cavity-forming wɛb insay bɔku thermoformed medicine blister pak. we dεn de pak di PVC wεb, dεn de hεt di PVC wεb, fכm am insay kכva, fulכp wit di doz fכm εn sial am to wan kompitibl lid mεtirial.

Klia PVC de alaw tablɛt ɛn kapsul fɔ kɔntinyu fɔ si fɔ inspekshɔn ɛn prɛzɛnt. Kɔlɔ ɔ opak famasitik gred dɛn kin divɛlɔp bak we dɛn nid fɔ no, branding ɔ layt protɛkshɔn, we kin fala di prɔdak-stability ɛn rigyuletɔri ɛvalueshɔn.

Plɛn rigid PVC de gi ikɔnomik thermoforming pefɔmɛns ɛn besik envayrɔmɛnt protɛkshɔn, bɔt i nɔ fɔ ɔtomɛtik pik fɔ mɛrɛsin dɛn we rili mɔstɔ ɔ ɔksijɛn sɛnsitiv. Famasiutik pakej sɛlɛkshɔn fɔ bi bays pan di drɔg stebiliti, target shelf layf, distribyushɔn klaymat ɛn di kɔmplit blista strɔkchɔ.

Rigid PVC Famasiutik Film Imej dɛn

Farmasi Rigid PVC Film Spɛsifikeshɔn dɛn

Rol dimɛnshɔn fɔ mach to di blista mashin, fɔm tul, unwind sistɛm ɛn prodakshɔn spid. Faynal spɛsifikɛshɔn dɛn fɔ apruv tru layn trayal ɛn famasitik pak kwalifayeshɔn bifo kɔmɛshɔnal prodakshɔn.

Ki Rikwaymɛnt fɔ Famasiutik PVC Blista Film

Tik we De Kɔnsistɛns

Gej kɔnsistɛns de ɛp fɔ sɔpɔt yunifom kaviti fɔmɛshɔn, stebul wɛb handel ɛn ripit silin kɔndishɔn. Di wan dɛn we de bay famasi fɔ difayn di tik ɛn tolɛreshɔn rikwaymɛnt as pat pan di spɛsifikɛshɔn we dɛn dɔn gri fɔ.

Tɛmofɔmin we pɔsin kin abop pan

di PVC film fכ fכm kכnsistεnt kεviti dεm we nכ de tכn pasmak, disכtכshכn כ wεb instεbiliti. Fɔm bihayvya dipen pan film gred, gej, kaviti jɔyometri, hita dizayn, layn spid ɛn fɔm prɛshɔn.

Klin Surface ɛn Optik Kwaliti

Klia famasitik PVC fɔ dɔn kɔntrol di kwaliti fɔ si wit smɔl jel, kristal pɔynt, blak spat, skrach, bɔbul, flɔ layn ɛn ɔda difrɛns dɛn we kin afɛkt di we aw di mashin de luk ɔ di we aw di mashin de wok.

Lay-Flat ɛn Kɔntrol Windin

kכntrol flat, wayndin tεnshכn, rol ed dεm εn sכfayz slip de εp di fכm wεb fכ rכn kכnsistεntli tru di blista pak mashin.

Batch Traceability we yu kin tray fɔ no

Di wan dɛn we de bay famasi pak fɔ difayn di tin dɛn we dɛn nid fɔ no fɔ di lɔt, fɔ mek dɛn gɛt rol lɛbl, fɔ inspekshɔn rɛkɔd, fɔ gɛt sɛtifiket dɔkyumentri ɛn fɔ kɔntrol chenj insay di sapɔt spɛsifikɛshɔn we dɛn dɔn gri fɔ.

Famasiutik Blista Pak Prɔses

insay wan tipik tεmכfכm fכm fכm blista prכsεs, di rigid PVC fכm wεb de כnwound εn hεt to wan kכntrol fכm tεmprachכ. di wεb we dεn hεt de fכm insay kכva dεm we dεn de yuz vεkyum, prεshכn כ mεkanikal εp dipכnt pan di ikwipεshכn fכ pak.

Dɔn dɛn kin lod tablɛt ɔ kapsul dɛn insay di kɔva dɛn. Wan kɔmpitabl aluminiɔm liding fɔyl de posishun oba di fɔm wɛb ɛn sial yuz kɔntrol tɛmpracha, prɛshɔn ɛn dwɛl tɛm. Dɔn dɛn kin kɔd di blista we dɔn dɔn, put pɔrfɔt, kɔt ɛn inspɛkt am akɔdin to di we aw dɛn pak am.

Di fɔm wɛb, liding fɔyl, ɔt-sil lak, kaviti dizayn ɛn mashin sɛtin fɔ evalyu as wan pak sistɛm pas as indipɛndɛnt matirial.

Plɛn PVC vs Ay-Barrier Famasiutik Blista Films

Plɛn rigid PVC na tin we dɛn kin yuz bɔku bɔku wan fɔ standad famasitik blista pak, bɔt i de gi lɔwa mɔstɔ barɛri pas ay-baria kɔted ɔ laminated strɔkchɔ dɛn. Di kɔrɛkt matirial fɔ pik frɔm prodak-stebiliti data pas fɔ kɔst ɔ fɔm pefɔmɛns nɔmɔ.

HSQY in pipul dɛn            famasitik PVC pak matirial rεnj        inklud rigid PVC εn riletid laminated כ kכt strכkchכ fכ difrεn blista pak rikwaymεnt.

Aw fɔ Pik PVC Film Tiknɛs fɔ Blista Pakɛj

Film tiknes fɔ pik akɔdin to di kaviti jɔyometri, doz-fɔm dimɛnshɔn, wɛb wit, stiffness we dɛn nid, fɔm dip ɛn blista mashin kɔndishɔn. wan dip כ mכr komplεks kεviti kin prodyuz big lokal tinin we dεn de tεmכfכm.

Kastom Rol Spɛsifikeshɔn fɔ Blister Pakɛj Layn dɛn

Di wan dɛn we de bay famasi blista-film fɔ tɔk mɔ pas di wit ɛn tik. Rol konfigyushɔn de afɛkt unwind stebiliti, chenj ova frikshɔn ɛn mashin handel dairekt wan.

• Film tik ɛn tolɛreshɔn.

• Slit wit ɛn wit tolɛreshɔn.

• Kor insay dayamita ɛn kor matirial.

• Maksimal rol ausayd dayamita.

• Maksimal rol wet we di mashin aksept.

• Winding dairekshɔn.

• Surface slip ɔ blok rikwaymɛnt.

• Maksimal nɔmba we dɛn alaw fɔ jɔyn ɔ splays.

• Rol label ɛn batch-traceability rikwaymɛnt dɛn.

• Protektiv pakej ɛn palet spɛsifikɛshɔn.

Aluminium lidding foil kompatibiliti

Rigid PVC na kɔmɔn fɔ sial to famasitik aluminiɔm push-thru fɔyl we dɛn kɔt wit ɔt-sil lak we kɔmpitabl wit PVC. Riliable siling dipen pan di komplit kɔmbaynshɔn fɔ fɔm film, lak, siling tɛmpracha, prɛshɔn, dwɛl tɛm ɛn siling-tul dizayn.

Bifo di kɔmɛshɔnal aprɔval, di kɔnvɔta fɔ validet di sil trɛnk, di we aw i luk, di lik pefɔmɛns ɛn di paket intɛgriti ɔnda di spɛsifikɛd prodakshɔn ɛn stebiliti kɔndishɔn dɛn.

Aplikeshɔn dɛn fɔ Famasiutik Rigid PVC Film

Plɛn rigid PVC na in dɛn kin yuz fɔs as fɔm wɛb fɔ rili stebul sɔlid-dos mɛrɛsin usay transparency, ikɔnomik prɔsesin ɛn standad tɛmfɔmin pefɔmɛns nid fɔ de.

Tablɛt Blista Pakɛj: Klia ɔ kɔlɔ blista kaviti fɔ rawnd, ɔval ɛn ɔda tablɛt fɔmat dɛn.

Kapsul Blister Packaging: Tεmכfכm kכva fכ had kapsul εn כda kwalifay kapsul prodakt dεm.

Pil ɛn Nyutrasiutik Pakɛj: Dɛn dɔn pik sɔlid-dos wɛlbɔdi biznɛs ɛn nyutrasiutik prodak dɛn afta dɛn dɔn ɛvaluet di matirial ɛn stebiliti.

Veterinary Pharmaceutical Packaging: Sεlekt veterinary tablεt εn kapsul usay di apruv blista strכkchכ mit di prodak rikwaymεnt dεm.

Liquid-dos, suppository ɛn high-barrier aplikeshɔn dɛn kin nid spɛshal laminated ɔ coated strɔkchɔ dɛn pas standad mono rigid PVC.

Famasiutik Kwaliti ɛn Dokumɛnt Rikwaymɛnt

Famasiutik praymari pak nid matirial-spɛsifi k kwalifayeshɔn. Jɛnɛral kɔmni sɛtifiket ɔ tɔd-pati inspekshɔn ripɔt dɛn nɔ fɔ trit as pruf fɔ se dɛn dɔn gri fɔ wan patikyula PVC gred fɔ ɛvri mɛrɛsin ɔ ɛvri makit.

Di wan dɛn we de bay fɔ kɔnfɔm di dɔkyumentri we dɛn nid fɔ di ɛksaktɔl matirial gred, di say we dɛn mek am ɛn di say we dɛn de go. Dipen pan di kwalifayeshɔn program, di pakej we dɛn aks fɔ kin gɛt:

• Di spɛsifikɛshɔn fɔ di prɔdak we dɛn dɔn gri fɔ.

• Sɛtifiket fɔ Analysis ɔ Sɛtifiket fɔ Kɔnfɔmɛns usay i apɔynt.

• Batch ɛn rol traysabiliti.

• Raw-material ɛn restricted-substance infɔmeshɔn.

• Aplikabl famasitik pak ɔ famakopial dɔkyumentri usay i de.

• Kwaliti-mɛnejmɛnt dɔkyumɛnt dɛn we de kɔba di rilevɛns prodakshɔn sayt.

• Chenj-kɔntrol ɛn notis rikwaymɛnt dɛn.

• Stɔrej, shelf-layf ɛn ritest infɔmeshɔn usay i apɔynt.

Kwaliti Inspekshɔn Aytem dɛn

Storage ɛn Handling fɔ Famasiutik PVC Film

Kip famasitik PVC rol dɛn na dɛn ɔrijinal protɛktiv pak na klin, dray ɛn ventilated stɔrɔj ​​eria fa frɔm dairekt san layt, pasmak ɔt, dɔst ɛn kɔntaminɛshɔn.

We dɛn muf di rol dɛn frɔm kol westɛm go na say we wam fɔ mek tin dɛn, alaw fɔ kondishɔn fɔ lɔng tɛm bifo yu opin di pak we de protɛkt am fɔ ridyus di risk fɔ kɔndenseshɔn na di fim sɔfays.

Di tɛm we dɛn fɔ kip di tin dɛn, di tin dɛn we dɛn nid fɔ tɛst bak ɛn ɛni envayrɔmɛnt limit fɔ fala di aprɔv prodak spɛsifikɛshɔn we dɛn gi fɔ di ɛksaktɔl gred.

Infɔmeshɔn we dɛn nid fɔ mek wan Famasiutik PVC Film Kɔt

• Tik ɛn tolɛreshɔn we dɛn nid.

• Slit rol wit ɛn tolɛreshɔn.

• Kor insay dayamita.

• Maksimal rol dayamita ɔ rol wet.

• Klia, tint ɔ opaque kɔlɔ rikwaymɛnt.

• Blister mashin manifakta ɛn mɔdel usay i de.

• Kaviti dimɛnshɔn ɔ blista drɔin.

• Tablɛt, kapsul ɔ ɔda kayn doz-fɔm.

• Rikwayd lidding foil ɛn siling sistem.

• Target market ɛn famasitik dɔkyumentri rikwaymɛnt dɛn.

• Initial kwantiti ɛn ɛstimat ɛni ia volyum.

• Pak rikwaymɛnt ɛn di pɔt usay dɛn de go.

Sɛtifiket dɛn ɛn Sɔpɔt Dɔkyumɛnt dɛn

Di sɛtifiket pikchɔ we de dɔŋ ya, dɛn kin kip am frɔm di ɔrijinal prɔdak pej. Di wan dɛn we de bay fɔ aks fɔ kɔrɛnt, matirial-spɛsifi k dɔkyumɛnt fɔ di ɛksaktɔl famasi PVC gred ɛn di say we dɛn mek am pas fɔ abop pan wan jenɛral sɛtifiket imej nɔmɔ.

If yu kwalifayeshɔn prɔses nid spɛshal famakopial, rigyuletɔri, DMF, kwaliti-sistim ɔ ristrikt-sɔbstans dɔkyumentri, gi di dɔkyumɛnt list we yu nid bifo sampul aprɔval ɔ kɔmɛshɔnal ɔda.

HSQY Plastik Grup Globɛl Ɛgzibishin dɛn

HSQY Plastik Grup kin mit famasi pakej kɔnvɔta, distribyushɔn ɛn industrial bayer dɛn na intanashɔnal ɛgzibishin fɔ tɔk bɔt matirial strɔkchɔ, blista-mashin spɛsifikɛshɔn, trayal rol, kwaliti rikwaymɛnt ɛn lɔng tɛm sapɔt program.

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt Famasiutik PVC Film

Wetin na famasi rigid PVC film?

Famasiutik rigid PVC film na thermoformable fכm wεb we dεn kin yuz fכ mek kaviti insay blista pak fכ tablεt, kapsul εn כda kwalifay sכlid-dos prodakt dεm.

Us tik PVC film dɛn kin yuz fɔ famasitik blista?

Dis HSQY prodakt listin de kɔba 0.15mm to 0.5mm. di korekt gej de dipכnt pan di dip na di kaviti, di dכz-fכm dimεnshכn, di blista tul dεm εn di prodakshכn kכndishכn dεm.

Yu tink se dɛn kin yuz 250 maykron PVC fɔ pak blista?

lεk 250 maykron na kכmכn rεfrεns gεj fכ famasi rigid PVC, bכt i nכ fכ sεlekt am כtomatכk. Di gej we dɛn dɔn gri fɔ mach di kaviti jɔyometri, blista mashin ɛn drɔg-pak validɛshɔn.

Wetin na di difrɛns bitwin PVC ɛn PVC/PVDC blista film?

Plɛn PVC de gi di fɔm bays ɛn besik barɛri. PVC/PVDC ad wan PVDC barɛri layt we de gi big rɛsistɛns to mɔstɔ ɛn ɔksijɛn, we de mek i fayn fɔ sɛnsitiv fɔmyulashɔn.

Yu tink se plain PVC fayn fɔ ɛvri mɛrɛsin?

Nɔ. Plɛn PVC na jɔs we dɛn kin pik fɔ rili stebul fɔmyulashɔn wit mɔdaret barɛri rikwaymɛnt. Mɔstɔ-sɛnsitiv, ɔksijɛn-sɛnsitiv ɔ layt-sɛnsitiv mɛrɛsin kin nid ay-baria ɔ layt-protɛktiv pak afta stebiliti ɛvalueshɔn.

HSQY kin kɔstɔmayz di PVC film wit?

Yɛs. HSQY kin tɔk bɔt kɔstɔmayz slit wit dɛn te to di list maksimal wɛb wit we na 1000mm. Gi di blista mashin, di tul in wit ɛn di tolɛreshɔn we dɛn nid we yu de aks fɔ kot.

Wetin na di maksimal rol dayamita?

Di infɔmeshɔn bɔt di prɔdak we de naw de sho wan maksimal rol dayamita we na lɛk 600mm. Di las rol dayamita ɛn di rol wet fɔ mach to di kɔstɔma in unwind sistem.

Rigid PVC film kin sial to aluminiɔm blista fɔyl?

Yes, we di aluminiɔm liding fɔyl yuz wan ɔt-sil lak we kɔmpitabl wit PVC ɛn di siling tɛmpracha, prɛshɔn ɛn di tɛm we dɛn de de, dɛn kin validet kɔrɛkt wan.

Yu tink se dɛn kin gɛt kɔlɔ fɔ mek PVC fim we dɛn de yuz fɔ mek mɛrɛsin?

Dɛn kin tɔk bɔt di gred dɛn we gɛt kɔlɔ ɔ we nɔ de shayn fɔ no aw fɔ no, aw fɔ luk ɔ we dɛn dɔn pik fɔ protɛkt di layt. Di fɔmyulashɔn fɔ rivyu ɛn kwalifay fɔ di famasi aplikeshɔn we dɛn bin want fɔ yuz.

Rigid PVC fayn fɔ pak likwid ɔ sɔpɔsitɔri?

Standard mono rigid PVC nɔ fɔ ɔtomɛtik spɛsifa fɔ dɛn aplikeshɔn ya. Liquid-dose ɛn suppository pakej bɔku tɛm nid spɛshal laminated strɔkchɔ dɛn we dɛn pik fɔ sial, kemikal kɔmpatibiliti, fleksibiliti ɛn filin kɔndishɔn.

Us dɔkyumɛnt dɛn a fɔ aks fɔ fɔ famasi PVC fim?

Dokumɛnt dipen pan di target makit ɛn kwalifayeshɔn program. Di wan dɛn we de bay fɔ aks fɔ dɔkyumɛnt dɛn we de kɔba di rayt prodak gred ɛn di say we dɛn mek am, inklud di spɛsifikɛshɔn we dɛn dɔn gri fɔ, batch dɔkyumentri ɛn di aplikeshɔn fɔ di famasi ɔ rigyuletɔri sɔpɔt dɔkyumɛnt dɛn.

A kin gɛt sampul fɔ blista mashin tɛst?

Yu kin kɔnfyus di sampul we de akɔdin to di tik ɛn di wit. Wan trayal rol na di bɛst we yu de evaluate wɛb handel, fɔm, fil ɛn sial pan kɔmɛshɔnal blista layn.

Us infɔmeshɔn dɛn nid fɔ kot?

Duya gi tik, slit wit, kɔr saiz, rol dayamita ɔ rol wet, doz fɔm, blista mashin, kaviti dimɛnshɔn, kɔlɔ, ɛni ia dimand, rigyuletɔri makit, dɔkyumentri rikwaymɛnt, pak we ɛn dɛstineshɔn pɔt.

Wetin Mek Yu Bay Famasiutik PVC Film frɔm HSQY?

HSQY de saplae rigid PVC film ɛn rilat famasitik blista pak matirial fɔ mɛrɛsin manifakta, famasi pak kɔnvɔta ɛn distribyushɔn. Di kɔstɔma dɛn kin tɔk bɔt di kɔstɔmayz gej, slit wit, rol dayamita, kɔlɔ, pak ɛn trayal matirial akɔdin to dɛn blista layn dɛn.

Send HSQY yu blista mashin mɔdel, kaviti drɔin, doz-fɔm sɛnsitiviti, target makɛt ɛn ɛni ia pɔchɛshɔn volyum. Wi tim kin ebul fɔ no if dɛn fɔ tink bɔt plain PVC ɔ wan ay-baria blista strɔkchɔ fɔ di prɔjek.