PVC Furakɛcogo sɛbɛn

Furakɛcogo PVC Blister Film Dilanbaga

HSQY bɛ furakɛli PVC filimu ni furasɛbɛn lamininenw di walasa ka furakisɛw, furakisɛw, furakisɛw, furakisɛw ani kɛnɛyako fura sugandilenw kɛ kurukuruw foroko ye minnu dilannen don ni funteni ye. Fɛn minnu bɛ dilan, olu ye PVC filimu gɛlɛn ye, PVC/PE filimu, PVC/PVDC filimu ani PVC/PVDC/PE filimu jɛlenw ye kulɛri jɛlenw ye, minnu ɲɛ ye bulama ye ani minnu tɛ ye.

Furakɛcogo kurukuruw foroko ka kan ka sugandi ka kɛ fɛɛrɛ dafalen ye. Foroko web, aluminiyɔmu datugulan papiye, blister cavity, sealing lacquer, pakew dilanni masin, furaw sɛgɛsɛgɛli, a maracogo ani a marali waati wajibiyalen bɛɛ bɛ nɔ bila baara laban na. HSQY bɛ se ka ladamucogo janya, rollo bonya, kulɛri, finimugu jɔcogo ani kɔrɔbɔlifɛnw di walasa ka pakew-sira jateminɛ.

Furakɛcogo PVC Film Product Range

HSQY bɛ furaw dilanni-filimu jɔcogo caman di. Jagokɛyɔrɔ kelen-kelen bɛɛ bɛ balansi wɛrɛ di funteni-sɛnɛcogo, barika baarakɛcogo, masinw fanga ani musakaw la.

Aw bɛ furaw lajɛ sanfɛ walasa ka furakɛli filimu hakɛw suma minnu bɛ sɔrɔ. Sugandili minnu bɛ tali kɛ o la, olu dɔw ye PVC filimu min bɛ kɛ furaw foroko kɔnɔ, 0,25 mm furakɛli PVC sɛbɛn jɛlen, PVC/PE filimu min bɛ kɛ ka suppository pakew kɛ ani ka... PVDC-coated PVC filimu suguya.

Furakɛcogo PVC filimu ɲɛfɔli cogoya

HSQY bɛ fɛn dilannenw denbaya caman di ni u hakɛ danfaralenw ye. Tablo min bɛ duguma, o bɛ blister-film (wuluwulu-filimu) fɛnw ɲɛfɔ minnu bɛ kɛ tuma caman na. Nafa labanw ka kan ka dafa ka ɲɛsin fɛnw jɔcogo tigitigi ma ani u dilanni hakɛ ma.

Kɛrɛnkɛrɛnnenya la: 'dɔgɔtɔrɔso PVC sɛbɛn' hakɛ caman man kan ka ɲagami ni furakɛli kurukuru filimu ye min bɛ se ka kɛ. Fura fɔlɔw foroko bɛ ɲini furakɛlicogo kɔrɔsilen, jogo ɲɛfɔlen ɲɛfɔlen, a dilanni min bɛ se ka tugu ɲɔgɔn kɔ ani a kɛcogo kɛrɛnkɛrɛnnenw dɛmɛni sɛbɛnw.

PVC ni PVC/PVDC ni PVC/PVDC/PE Blister Film

Barika sugandili ka kan ka da pakew-fɛnw sabatili kunnafoniw kan. Filimu min ka barika ka bon, o bɛ se ka kɛ wajibi tɛ fura sabatilen na, ka sɔrɔ PVC sariyalen bɛ se ka kɛ a tɛ se ka kɛ fura ye min bɛ ji sɔrɔ, min bɛ feere waati funteni ni nɛnɛ na.

Furakɛcogo PVC Blister Packaging bɛ baara kɛ cogo min na

1. Web unwinding: Furakɛcogo PVC kurulen bɛ wuli ni tension kɔrɔsilen ye.

2. Sumaya: Foroko-minɛn bɛ tɛmɛ sofa-minɛnw walima jirisunw fɛ fo ka se a dilanni cogoya wajibiyalen ma.

3. Furakɛcogo : Vacuum, fiɲɛ digilen, plug dɛmɛni walima u faralen ɲɔgɔn kan, olu bɛ kurukuruw bɔ.

4. Fura fasa : furakisɛw, furakisɛw walima fɛn wɛrɛw bɛ bila dingɛw kɔnɔ minnu dilannen don.

5. Datugulan kɛli: Aluminiyɔmu papiye min dilannen don ni funteni ye walima datugulan wɛrɛ min bɛ se ka kɛ, o bɛ bila foroko web kan.

6. Funteni sirili : Funteni, degun ani sigi waati min bɛ kɔrɔsi, olu bɛ lakɛri baara ani ka pake sirili da.

7. Sɛgɛsɛgɛli ni punching: Web bɛ lajɛ, ka kodɔn ani ka tigɛ ka kɛ blister karti dafalenw ye.

A ka c’a la, PVC filimu yɛrɛ tɛ pake baara bɛɛ kɛ. Blister pack laban bɛ kɛ ni web dilannen ye, datugulan papiye, funteni-sigicogo ani jateminɛ min bɛ dabɔ masin baarakɛminɛnw fɛ.

Thermoforming baarakɛcogo ani masinw ka baarakɛcogo

Fura filimu feerelaw minnu bɛ jɔyɔrɔba la, olu bɛ sinsin fɛnw dɔgɔyali kɔrɔsilen kan, a bonya bɛrɛbɛrɛli kan, a sirili sirilen na ani a dilanni sabatili la bawo o jogo ninnu bɛ nɔ bila layini baarakɛcogo ɲuman na k’a ɲɛsin a yɛrɛ ma. Filimu min bɛ ɲɔgɔn ta ɛntɛrinɛti kan, o bɛ se ka kɛ sababu ye ka dingɛ kogow kɛ cogo kelen na, ka ɛntɛrinɛti nɔfɛtaama gɛlɛyaw lase a ma, ka a tɔgɔ sɛbɛncogo jugu lase mɔgɔ ma, ka sigilan kurukuru ani ka punch kɛ cogo la min tɛ bɛn.

Ni aw bɛ furakɛli PVC filimu kura jateminɛ, aw bɛ blister-machine taamasiyɛn ni a modɛli, platen walima rotary forming system, heating-zone configuration, web bonya, layini teliya, cavity depth, draw ratio, indexing janya, winding direction ani maximum roll diameter di.

Mun ka kan ka lajɛ kɔrɔbɔli dɔ senfɛ?

• Web tracking ani roll tension sabatili

• So funteni kelen-kelen ka tɛmɛn foroko bonya kan

• Kɔnɔw ɲɛfɔli ani nkɔni jɔli

• Kogo-kɛnɛya tilatilali sɛnɛni kɔfɛ

• Web shrinkage ani a tɔgɔ sɛbɛnni

• Fɛnɲɛnɛma, degun taamasiɲɛw, bugun walima pinɛw

• Flange flatness ka sɔrɔ ka funteni siri

• Punching tiɲɛni ani tigɛcogo ɲuman

A bɛ se ka baara kɛ ni Aluminum Lidding Foil ye

Furakɛcogo PVC kurukuru filimu bɛ siri tuma caman na aliminiyɔmu papiye min bɛ se ka wuli ka tɛmɛ, min bɛ ni funteni sirilan ye min bɛ bɛn ni foroko dilancogo ye. Sigili ɲɛtaa bɛ bɔ lakɛri kemikaliya la, PVC walima filimu datugulen yɔrɔ la, sigili funteni, tansiyɔn, sigi waati, flansɛ saniya ani masin baarakɛminɛnw.

Sani a ka jago kɛ, aw bɛ filimu min bɛ dilan tigitigi, aw bɛ o kɔrɔbɔ ni datugulan ye min laɲininen don. Aw bɛ sigilan fanga, kanal bɔgɔbɔli, papiye delamination, da wuli fanga, push-through baarakɛcogo ani sigilan ɲɔgɔndan jateminɛ a marali ni a sabatili cogoya kɔfɛ.

PVC Furakɛcogo sɛbɛn kɛcogo

• Tablɛti kurukuruw pakew

• Kapisili kurukuru gɛlɛnw ni nɔgɔlenw

• Furakisɛ ni balodɛsɛ furakisɛw foroko

• Supositɛri ni a tata hakɛ kelen foroko ni sigida lamininen ye min bɛ bɛn ɲɔgɔn ma

• Baganmara fura kurukuruw

• Kɛnɛyaso-sɛgɛsɛgɛli ni misali-ta hakɛ pakew

• Sɛgɛsɛgɛli-kɛminɛnw yɔrɔ sugandilenw ani kɛnɛya-fura-minɛnw sanubɔlanw setigiya kɔfɛ

• Furakɛcogo-minɛnw jiracogo sanubɔlanw minnu tɛ sterili ye, yɔrɔ minnu na fɛnw ni u foroko kɛcogo bɛ tiɲɛ

Sɛgɛsɛgɛli kɔlɔsili: Furakɛcogo PVC filimu standard man kan ka ɲɛfɔ a yɛrɛma i n’a fɔ sterili barikalan. Furakɛcogo-minɛnw foroko ni sterilize laban bɛ wajibiya ka kɛɲɛ ni sigida kɛrɛnkɛrɛnnenw ka tiɲɛni ye sterilize kɛcogo, sigicogo, mikrobiyɔmu barika ani fɛn dilannenw mara waati.

Film PVC Farmasi jɛlen, Tinted ani Opaque

PVC jɛlen bɛ furaw yecogo di ani ka furakisɛw ni furakisɛw sɛgɛsɛgɛli ɲɛnama dɛmɛ. Bulu jɛlen walima ɲɛgɛn wɛrɛw bɛ se ka kɛ ka fɛnw danfara, ka masinw sɛgɛsɛgɛ walima ka u tɔgɔ jira. Kulɛri finman, amber walima custom custom bɛ se ka yeelen bɔli dɔgɔya, nka kulɛri dɔrɔn man kan ka jate yeelen lakanani ɲuman dalilu ye.

Ni yeelen bɛ fɛn minnu na, aw bɛ spektral transmission walima yeelen lakanani baarakɛcogo wajibiyalen ɲɛfɔ ani k’a sɛmɛntiya sabatili kalanw fɛ. Pigments ni colorants fana ka kan ka don fɛn dilannenw lakanani ni sariyaw jateminɛni na.

Barika wajibiyalenw ani Shelf-Life Sugandili

Filimu min bɛ fura dilan, o ka kan ka fura lakana a marali waati bɛɛ la min dagalen don. Barika min ka kan ka kɛ, o bɛ bɔ fura dilanni na, furakisɛ dacogo la, a furakisɛw dacogo la, a kɔnɔna hakɛw, filimu yɔrɔ min bɛ kɛnɛ kan, a maracogo, a foroko filananw ani a tilatilali cogoyaw.

Aw ye nin ɲininkali ninnu kɛ sani aw ka sigicogo dɔ sugandi:

• Yala fura in bɛ se ka kɛ ji, oksizɛni, yeelen walima kasa bɔnɛni ye wa?

• A ka kan ka se ka mara waati jumɛn na?

• Waatibolodacogo ni a jɛnsɛnni sira jumɛn de bɛ tali kɛ?

• Kɔnɔbara juguya ni filimu dilannen-yɔrɔ jumɛn de ka kan?

• Yala blister kartiw bɛna kɛ kartɔnw kɔnɔ, foroko kɔnɔ walima fɛn sirilenw kɔnɔ wa?

• Yala jalen walima barika filanan foroko bɛ kɛ wa?

• Barika kunnafoniw ni sabatili jaabi jumɛnw bɛ sɔrɔ sisan foroko in na?

Filimu barikalan kunnafoniw minnu ma dilan, olu nafa ka bon sɛgɛsɛgɛli la, nka dingɛ min dilannen don, o ka fin ka tɛmɛ ɛntɛrinɛti fɔlɔ kan. O la, pake laban lakanani ka kan ka sɛgɛsɛgɛ ni kɔnɔbara jateminɛcogo yɛrɛ ye ani blister pake dafalen.

Furakɛcogo PVC filimu ka jogoɲini kɔlɔsili

Furakɛcogo blister film bɛ a ɲini ka fɛnw ɲɛfɔ minnu bɛ kɔlɔsi ani ka batch traceability. Ka kɛɲɛ ni fɛn dilannenw sigicogo ye ani kiliyanw ka ɲininiw ye, jogoɲini bɛ se ka kɛ ninnu ye:

Sariyasunw ni furakɛli sɛbɛnw

Seere kelen tɛ yen min bɛ PVC filimu bɛɛ kɛ a yɛrɛma ka bɛn fura ni sugu bɛɛ ma. Furakɛminɛnw foroko bɛnnenya bɛ jateminɛ caman na ka kɛɲɛ ni lakanani, a bɛnkan, a lakanani ani a baarakɛcogo ye. fura laɲininen

Ka kɛɲɛ ni taayɔrɔ sugu ye ani kiliyanw ka dosiye ye, sɛbɛn ɲininenw bɛ se ka kɛ ninnu ye:

• Fɛn dilannenw ɲɛfɔli ani fɛɛrɛko kunnafonidilan

• Sɛgɛsɛgɛlisɛbɛn min bɛ sɔrɔ sɛnɛfɛnw dilanni kulu kelen-kelen bɛɛ la

• Materiel composition ani declaration de conformité

• Jogoɲumanya-ɲɛnabɔli walima fɛn dilanni-yɔrɔ kunnafoniw

• Furakɛcogo sɛgɛsɛgɛli kunnafoniw minnu bɛ se ka kɛ

• Extractables, migration walima lakana jateminɛ kunnafoniw

• Barrière, thermoforming ani heat-seal baarakɛcogo kunnafoniw

• Yɛlɛma-kɔlɔsili ani batch-traceability kunnafoniw

• Sariyasenw dɛmɛsɛbɛn minnu ɲinina furaw ɲɛmɔgɔ dosiye walima feereli-sɛbɛn dɔ kama

Kunnafonidila ka kan k’a fɔ ni o fɛnw ka kan ka dɛmɛ don wajibiw ma minnu bɛ tali kɛ Etazuni, Erɔpu Kelenyatɔn, Angletɛri, Japon walima jamana wɛrɛ la. Sɛbɛn minnu bɛ i n’a fɔ ISO 9001, SGS, RoHS walima REACH ka kunnafoniw, olu bɛ se ka kɛ nafa ye, nka u tɛ furaw ni furaw bɛnkan, sabatili kunnafoniw walima sugu kɛrɛnkɛrɛnnenw ka pake fɔlɔw wajibiyalenw nɔ bila.

Yala furakɛli PVC filimu bɛnnen don furakɛli minɛnw ma wa?

PVC gɛlɛnw ni PVC laminiw jɔcogo bɛ se ka kɛ furakɛli-minɛnw sanubɔlan sugandilenw na, diagnostic-kit yɔrɔw ani kɛnɛyako foroko minnu tɛ sterili ye. Fɛn min ka kan ka kɛ, o ni furakisɛ kurukuruni filimu min bɛ kɛ ka kɛɲɛ ni sariya ye, o tɛ kelen ye ni a foroko ka kan ka sterilize muɲu, ka sterili barika mara walima ka furakɛli-minɛnw foroko sariyaw labato.

Aw bɛ minɛn suguya, sterilize kɛcogo, sigicogo, bolifɛnko wajibiyalenw, a maracogo ani sariya suguya di sani aw ka fɛn dɔ sugandi. Gama fiyɛli, ɛlektrɔniki fiɲɛ, etilɛni ɔkisidi, watara ani sterilize kɛcogo wɛrɛw bɛ se ka nɔ bila polimɛriw la cogo wɛrɛ la, wa u bɛ kɛ sababu ye ka sigida kɛrɛnkɛrɛnnenw tiɲɛni wajibiya.

Sɛbɛnni, kodɔn ani fɛn dilannenw dɔnni

Kunnafoni caman minnu bɛ ɲɔgɔn falen i n’a fɔ batɛmu nimɔrɔ ani a dafalen don, olu bɛ kɛ blister pack dafalen walima lidding foil kan pake dilanni waati. Kulɛri min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, sɛbɛnni taamasiyɛn sɛbɛnnenw walima yɔrɔ furakɛli kɛrɛnkɛrɛnnen bɛ se ka sɔrɔ PVC jɔcogo sugandilenw na, nka sɛbɛnni tilennen min bɛ kɛ foroko web kan, o ka kan ka tiɲɛ ka ɲɛsin tintiri nɔrɔli ma, jiginni farati, masinw sɛbɛnni ani fura ni fɛn dilannenw ka ɲɔgɔn sɔrɔli.

Aw bɛ seko ni dɔnko baara di, kulɛri hakɛ, sɛbɛn bɔlen fan, segin-ka-bɔnye janya, ɲɛ-taamaʃyɛn hakɛ, a jiginni sira ani ni tintiri bɛna ɲɛsin fɛn dilannen ma, nɔrɔlan walima kɛnɛma yɔrɔ ma. Fura sɛbɛnni ka kan ka kɛ ni tintiri ye min bɛ kɔlɔsi ani min dagalen don.

Blister-Film Gɛlɛya minnu bɛ sɔrɔ tuma caman ani u latilenni walew

Furakɛcogo PVC wulilenw marali n’u minɛcogo

• Aw bɛ kurukuruw mara u foroko fɔlɔ kɔnɔ yɔrɔ saniyalen na, yɔrɔ min jalen don ani yɔrɔ min funteni bɛ se ka kɔlɔsi.

• Aw bɛ filimu tanga tile yeelen tilennen ma, ji, buguri, kasa gɛlɛnw ani kemikɛlifɛnw ma minnu bɛ a tiɲɛ.

• Aw bɛ kurukuruw jɔ ka jɔ walima ka u dɛmɛ ka kɛɲɛ ni feerekɛla ka pakew dilanni ye walasa ka dakunw tiɲɛni ni teleskɔpi bali.

• Aw kana kurukuruw sama duguma walima ka u kɔrɔta ni filimu dakunw ye minnu tɛ dɛmɛ.

• Aw bɛ a to fɛnw ka bɛn ka kɛɲɛ ni fɛn dilanni so funteni ye sani aw ka ji tangalan da wuli ni a mago bɛ a la.

• Aw bɛ don fɔlɔ, bɔ fɔlɔ fɛnw maracogo kɔlɔsili kɛ ani ka batch identité mara slitting ni packaging bɛɛ kɔnɔ.

• Aw bɛ a maracogo ni a maracogo dafalenw labato minnu fɔra filimu hakɛ tigitigi la.

Segin-ka-bɔnye ni sabatili jateminɛw

PVC gɛlɛn tɛ se ka tiɲɛ walima ka kɛ so kɔnɔ. Fura kurukuruw fana ka gɛlɛn ka segin u cogo kɔrɔ la sugu caman na barisa PVC walima barikalan foroko bɛ siri aliminiyɔmu na ani fura tolenw bɛ se ka to pakew kɔnɔ.

Fɛɛrɛ minnu bɛ se ka kɛ walasa ka ɲɛtaa kɛ, olu ye ka filimu janya dɔgɔya k’a sɔrɔ u ma baarakɛcogo tiɲɛ, ka barikalan jɔcogo dɔgɔmannin sugandi min bɛ sabatili wajibiyalenw dafa, ka dingɛ jateminɛcogo ɲuman kɛ, ka fɛn dilanni tiɲɛnenw dɔgɔya, ka izini nɔgɔ saniyalenw faranfasi ani ka blister-pack lajɛ porogaramu sigilenw jateminɛ yɔrɔ minnu na.

Fɛn wɛrɛ minnu tɛ PVC ye i n’a fɔ mono-PP, APET, olefini cyclique structures walima aluminiyɔmu-based cold-form packaging, olu bɛ se ka jateminɛ, nka fɛɛrɛ wɛrɛ kelen-kelen bɛɛ bɛ fɛn caman Changer ka baarakɛcogo, barika, masinw, musaka ani sariyaw sɛbɛnw dilan. Fɛnɲɛnɛma caman caman cili bɛ fɛɛrɛko ni sabatili jateminɛ kura de wajibiya.

Foroko ni fɛnw bɔli jamana wɛrɛw la

A ka c’a la, furakɛli PVC filimu bɛ dilan joginda kurulenw kɔnɔ minnu sirilen don kosɛbɛ, minnu lakananen don ni PE filimu ye, ni papiye kraft ye, ni laban lakanani ye ani ni palɛtiw ye minnu bɛ taa jamana wɛrɛw la. Packing configuration bɛ bɔ roll bonya, roll girinya, core hakɛ, roll diameter maximum ani customer handling equipment.

Sani aw ka komandi kɛ, aw bɛ a sɛmɛntiya:

• Rollo girinya hakɛ maksimali min bɛ sɔn pakew dilanni sira fɛ

• Core kɔnɔna diameter ani core material

• Maximum roll kɛnɛma cɛmancɛ

• Winding direction ani coated-side orientation

• Sɔgɔsɔgɔninjɛ minnu bɛ se ka kɛ, olu hakɛ ni u suguya

• Roll identification ani batch-label cogoya

• Palɛti hakɛ, a girinya bɛɛ lajɛlen ani a dalajɛli dantigɛliw

• Minɛnw doni ni ji lakanani wajibiyalenw

Mun na i bɛ HSQY sugandi ka kɛ i ka furakɛli PVC filimu dilanbaga ye?

• PVC gɛlɛnw, PVC/PE, PVC/PVDC ani PVC/PVDC/PE fɛnw suganditaw

• Ladamuni janya, slit bonya, roll diameter, core ani winding configuration

• Kulɛriw yiriwali jɛlen, tintin ani opaque

• Fura kurukuruw foroko minnu bɛ kɛ ka kɛɲɛ ni sariya ye ani minnu ka barika ka bon

• Sɛgɛsɛgɛli ni kɔrɔbɔli-sɛbɛn dɛmɛni ka ɲɛsin blister-line sɛgɛsɛgɛli ma

• Batch specifications, test documents ani export sɛbɛnw ka kɛɲɛ ni grade confirmé ye

• Bulk roll packaging ani diɲɛ kɔnɔ cidenw dɛmɛni

• O ni PVDC-coated film ani furaw foroko fɛnw sɔrɔli bɛ tali kɛ ɲɔgɔn na

Aw bɛ furakɛli PVC filimuw misaliw ni u sɔngɔ ɲini

Walasa ka kunnafoni sɛbɛncogo ɲuman ni kuma fɔlen sɔrɔ, i ka:

• Fura tata hakɛ ni furaw tali

• Sisan forming-film sigicogo ani feerekɛlaw ka ɲɛfɔli

• PVC janya wajibiyalen ani PVDC dacogo girinya, ni o bɛ se ka kɛ

• Filimu bonya, a kɔnɔna cɛmancɛ, a wulicogo ani a girinya

• Blister-machine model, forming suguya ani layini teliya

• Cavity dimensions, ja juguya ani blister-card layout

• Aluminiyɔmu datugulan papiye ani funteni-sigilan suguya

• Ji, oksizɛni ani yeelen barika wajibiyalen

• Kulɛri, sɛbɛnni walima finiko wajibiyalenw

• Destination market ani sariyasɛbɛnw wajibiyalenw

• Kɔrɔbɔli hakɛ, jago hakɛ ani san ɲinini

• Foroko, palɛti ani fɛnw lasecogo wajibiyalenw

Aw ye HSQY sɔrɔ ka tɛmɛn ɲininkali ɲɛ walasa ka fɛɛrɛko kunnafoniw ɲini, misaliw, kɔrɔbɔli sɛbɛnw ani sɔngɔ caman.

FAQ Furakɛcogo PVC filimu kan

Furakɛcogo PVC filimu ye mun ye?

Furakɛcogo PVC filimu ye fɛn dilannen ye min ka gɛlɛn, a ka c’a la, a tɛ plastiki kɛ, a bɛ kɛ ka kurukuruw dilan ni funteni ye furakisɛw, furakisɛw ani fura tata hakɛ kelen wɛrɛw kama. A sirilen bɛ datugulan dɔ la min bɛ bɛn a ma walasa ka kurukuru dafalen dilan.

PVC janya jumɛn bɛ kɛ furakɛli kurukuruw foroko la?

Furakɛcogo minnu ka teli ka kɛ, olu janya bɛ se milimɛtɛrɛ 0,20–0,30 ma, hali ni HSQY ka furakɛlifɛnw hakɛ bɛ bɔ milimɛtɛrɛ 0,13–0,50 ɲɔgɔn na. Janya ɲuman bɛ bɔ dingɛ hakɛ la, ja janya la, fɛn dilannen girinya la, masin cogoya la ani masin fanga wajibiyalen na.

Danfara jumɛn bɛ PVC ni PVC/PVDC filimu cɛ?

PVC gɛlɛn bɛ jɛya ɲuman ni thermoforming di ni musaka dɔgɔman ye nka a ka ji ni oksizɛni barika dan ye ni i ye a suma ni filimuw ye minnu datugulen don. PVC/PVDC bɛ ni PVDC barikalan ye min bɛ furaw lakanani ɲɛ ka taa a fɛ furaw la minnu bɛ ji sɔrɔ ani minnu bɛ oksizɛni sɔrɔ.

PVC/PVDC/PE furakɛli filimu ye mun ye?

O ye furakɛli filimu ye min bɛ kɛ ni fɛn caman ye, min bɛ PVC basigilen, PVDC barikalan ani PE cɛmancɛ walima baarakɛta fara ɲɔgɔn kan. O jɔcogo bɛ se ka barika ni foroko baarakɛcogo ɲɛnama di deep-draw walima hygroscopic-product baarakɛcogo sugandilenw ma.

Yala PVC standard ye furakɛli filimu ye min barika ka bon wa?

Ayi, PVC gɛlɛn min bɛ kɛ ka kɛɲɛ ni sariya ye, o bɛ lakana jɔnjɔn di nka a tɛ jate fɛn ye min bɛ ji walima oksizɛni bali ka caya. Fɛn minnu ka kan ka lakana kosɛbɛ, olu mago bɛ se ka kɛ PVC/PVDC, PCTFE laminati, filimu min sinsinnen bɛ COC kan walima aliminiyɔmu nɛnɛma, ka kɛɲɛ ni sabatili sɛgɛsɛgɛli ye.

Yala furakɛli PVC filimu bɛ se ka siri aluminiyɔmu papiye la wa?

Awɔ. PVC blister film gɛlɛn bɛ siri tuma caman na aluminiyɔmu datugulan papiye la min datugulen don ni funteni-sigilan ye min bɛ bɛn a ma. Foyi tigitigi, lakɛri ani sigilan finɛtiri ka kan ka sɛgɛsɛgɛ ni filimu dilanni ni pakew dilanni masin ye.

Kulɛri jumɛnw bɛ sɔrɔ?

Sugandili minnu bɛ sɔrɔ, olu bɛ se ka kɛ kulɛri bulu jɛlen ye, min bɛ kɛnɛya, fin, amber, bilen, jɛman, jɛman ani kulɛri wɛrɛw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. Kulɛriw ni opasite hakɛw ka kan ka sɔn furakɛli-minɛnw tali laɲininen na.

Yala PVC kulɛrilen bɛ furaw lakana minnu bɛ yeelen bɔ wa?

Filimu kulɛrilen walima min tɛ ye, o bɛ se ka yeelen bɔli dɔgɔya, nka lakanani bɛrɛbɛrɛ ka kan ka jira ni spektral walima sabatili sɛgɛsɛgɛli ɲɛfɔlen ye. Kulɛri min bɛ ye, o dɔrɔn tɛ yeelen-bɔri baarakɛcogo dalilu bɛrɛ ye.

Yala PVC furasɛbɛn bɛ se ka furakɛli minɛnw pake wa?

PVC jɔli gɛlɛn sugandilenw bɛ se ka kɛ sanubɔlanw ye minnu tɛ sterili ye ani kɛnɛyako-fɛnw foroko. Furakɛcogo-minɛnw foroko sterili bɛ a ɲini ka fɛn kɛrɛnkɛrɛnnenw, u sigilan, u sterilize kɛcogo, u ka banakisɛw balilan, u tacogo ani u maracogo tiɲɛni kɛrɛnkɛrɛnnenw de wajibiya.

Yala PVC blister film bɛ se ka denmisɛnw kɛlɛ wa?

PVC filimu yɛrɛ tɛ denmisɛnw kɛlɛ. Denmisɛnw ka se ka banakisɛfagalanw kɛlɛ, o bɛ bɔ kurukuruw dilanni dafalen na, a datugucogo, a dacogo ani a sɛgɛsɛgɛli ka kɛɲɛ ni denmisɛnw ka furakisɛw tali sariya ye min bɛ sirataama.

Yala furakɛli PVC filimu tɛ sterili ye wa?

Furakɛcogo PVC filimu standard tɛ dilan a yɛrɛma i n’a fɔ fɛn sterili. Sterili ni sterile-barrier performance bɛ kɛ dɔrɔn ni fɛn ni a foroko dafalen dilannen don kɛrɛnkɛrɛnnenya la, ka sterilize ani ka tiɲɛ o kun na.

Mun de bɛ kɛ sababu ye ka kurukuruw bɔcogo jugu sɔrɔ?

A sababu minnu ka teli ka sɔrɔ, olu ye funteni dɔgɔyali ye walima funteni tɛ min na, a sigili waati kunkurunnin, fiɲɛ walima fiɲɛ min bɛ degun, filimu janya man ɲi, a janya kojugu, mɔbili fiɲɛbɔyɔrɔw datugulen walima masin tension jugu.

Furakɛcogo PVC filimu bɛ sɛgɛsɛgɛ cogo di?

Kɔrɔbɔli bɛ se ka kɛ danyɔrɔ, a bonya, a bonya, a ɲɛnayeli dɛsɛ, a kulɛri, a sisi, a sumaya dɔgɔyali, a dilanni baarakɛcogo, a kɛcogo, a barikalanw tali, a dacogo girinya, a bɛ se ka kɛ ni funteni ni sigilan bɛnkan ye, a jiginni, a bɛ se ka bɔ a la ani sɛgɛsɛgɛli wɛrɛw minnu bɛ ɲini ka kɛɲɛ ni bɛnkansɛbɛn ye.

Yala ISO 9001 b’a jira ko PVC filimu bɛnnen don furakɛli la wa?

Ayi ISO 9001 bɛ tali kɛ jogoɲumanya-sɛnɛcogo dɔ la. Fura ni ɲɔgɔn cɛ bɛnnenya fana bɛ fɛnw ɲɛfɔcogo ɲɛfɔlen de wajibiya, lakana ni bɛnkan daliluw, baarakɛcogo sɛgɛsɛgɛli, kuluw kɔlɔsili ani sɛbɛnw minnu ɲininen don yɔrɔ sugu fɛ ani fura-fɛnw dosiye fɛ.

Yala furakɛli PVC filimu bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

PVC dilanni fɛn gɛlɛn saniyalenw bɛ se ka kɛ fɛn wɛrɛw ye yɔrɔ minnu na, yɔrɔ bɛnnenw bɛ yen. Fura kurukuru minnu kɛra, olu ka gɛlɛn ka segin u cogo kɔrɔ la sugu caman na barisa u bɛ plastiki ni aliminiyɔmu fara ɲɔgɔn kan, wa fura tolenw bɛ se ka sɔrɔ u la. Sigida lajɛ sariyaw ka kan ka lajɛ.

Yala PVC furakɛli sɛbɛn bɛ se ka tiɲɛ wa?

Ayi, PVC kɔrɔlen tɛ se ka tiɲɛ walima ka kɛ so kɔnɔ. Laminiko fɔlenw ka kan ka sinsin fɛnw dɔgɔyali kan min sɛgɛsɛgɛra, fɛn dilanni fɛn tiɲɛnenw sɔrɔli, fɛnw dalajɛcogo walima fɛn wɛrɛw sigicogo minnu sɛgɛsɛgɛra.

Koman hakɛ fitinin ye mun ye?

HSQY ka fɛn dilannenw ɲɛw bɛ MOQ jira tuma caman na min bɛ kilo 1000–2000 ɲɔgɔn bɔ, ka kɛɲɛ ni u jɔcogo, u bonya, u bonya, u kulɛri ani u sɛbɛnni wajibiyalenw ye. PVDC dacogo girinya minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye walima furakɛli kɛrɛnkɛrɛnnenw bɛ se ka kɛ sababu ye ka hakɛ wɛrɛ de wajibiya.

Yala HSQY bɛ se ka furakɛli PVC filimu misaliw di wa?

Awɔ. Misaliw walima kɔrɔbɔli sɛbɛnw bɛ se ka jateminɛ ni masinw nɔfɛtaama, dingɛw dilanni, funteni datuguli, punching, yecogo ɲuman ani pake dafalen. Aw bɛ sisan ɲɛfɔli ni blister-machine kunnafoniw di walasa ka misali sugandili ɲɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ filimu jɔcogo, a bonya, a bonya, a kurukuruni cɛmancɛ, a kɔnɔna, a kulɛri, a dacogo girinya, a kɔnɔna juguya, a masin modɛli, a datugulan, a ka sariya sugu, a sɛbɛn wajibiyalenw, a kɔrɔbɔli hakɛ ani a ɲinini di.