BOPET/PETG Filimu min bɛ siri

BOPET/PETG Sigili filimu ye mun ye?

BOPET/PETG sigilan filimu , n’a bɛ fɔ fana ko BOPET/PETG datugulan filimu walima poliyesitɛri dakun datugulan filimu, o ye sanubɔlan datugulan ye min dilannen don ni sanubɔlan ye min bɛ PET kɛnɛma lamini min ɲɛsinnen bɛ aksidan fila ma ni PETG funteni-sigilan ye.

BOPET layɛrɛ bɛ sɛgɛn fanga di, kɛnɛya, kɛnɛya, hakɛ sabatili ani yɔrɔ min bɛ se ka sɛbɛn. PETG layini bɛ kɛ i n’a fɔ sanubɔlan min bɛ se ka ɲɔgɔn sɔrɔ, wa a bɛ jɛɲɔgɔnya barikama don ni funteni, degun ani sigi waati kɔrɔsilen kɛra.

HSQY ka sisan BOPET/PETG datugulan filimu min bɛ kɛ ka kɛɲɛ ni sariya ye, o dilannen don fɔlɔ i n’a fɔ filimu min bɛ da tugu PET ni PETG pakew yɔrɔw la minnu bɛ bɛn ɲɔgɔn ma. A dabɔra baarakɛminɛnw kama minnu bɛ pakew dafalen, bɔgɔbɔgɔli kunbɛnni ani u tilatilali lakanani bila jɔyɔrɔ fɔlɔ la sanni ka bololabaara nɔgɔya.

A ka kan ka bɛn ni sanubɔlan yɛrɛ ye, dumunifɛn ani sigilan masin. A man kan ka miiri ko filimu bɛ APET, rPET, CPET, PP, PE walima PS sanubɔlan bɛɛ datugu ka sɔrɔ a ma sɛgɛsɛgɛli kɛ.

BOPET/PETG Lidding Film bɛ labɛn cogo di?

Lamini nɔrɔlan, PETG dilanni, sɛbɛnnikɛlan tintin ani furakɛli baarakɛcogo min bɛ se ka sugandi, olu ka kan ka sugandi ka kɛɲɛ ni dumuni ni ɲɔgɔn cɛ cogoya laɲinitaw ye ani a maracogo.

BOPET/PETG Datugulan filimu ɲɛfɔli

Tablo nata bɛ HSQY ka sisan sariyasun lock-seal BOPET/PETG lidding-film hakɛ lajɛ. Nafa labanw ka kan ka dafa ka ɲɛsin sigicogo tigitigi ma.

Fɛn minnu fɔra sanfɛ, olu bɛ tali kɛ sisan lock-seal fura la min bɛ kɛ ka kɛɲɛ ni sariya ye. A kɛcogo minnu bɛ se ka bɔ nɔgɔya la, minnu bɛ se ka kɛ konfirɛzi ye, minnu bɛ se ka kɛ mikrowɛn na, minnu bɛ se ka kɛ foro kɔnɔ ani minnu bɛ se ka kɛ ni barika caman ye, olu bɛ filimu jɔcogo danfaralenw ni u tiɲɛni de wajibiya.

BOPET/PETG Lock-Seal Film nafa jɔnjɔnw

• Kɔlɔsili-sigicogo barikama: A dabɔra walasa ka jɛɲɔgɔnya barikama don PET walima PETG sigilan yɔrɔw la minnu bɛ bɛn ɲɔgɔn ma.

• Foroko dafalen ka bon: A bɛnnen don pakew ma, yɔrɔ minnu na, jibɔbaliya ni bolifɛnw sabatili ye fɔlɔfɔlɔw ye.

• Kɛnɛyaba : BOPET ni PETG layini jɛlenw bɛ fɛn dilannenw yecogo ni feerelikɛyɔrɔw jiracogo dɛmɛ.

• A ɲɛda bɛ manamana: Poliyesitɛri kɛnɛma bɛ kɛ sababu ye ka pakew cogoya saniya ani ka ɲɛ.

• Dimensions stabilité : BOPET bɛ dɛmɛ ka filimu bɔgɔbɔgɔli kɔlɔsi sanubɔlan sirili waati.

• Masina fanga : Laminate bɛ se ka sɔgɔsɔgɔ ni sɔgɔsɔgɔninjɛ nafama di sanubɔlan bɛɛ lajɛlen pakew ma.

• Yɔrɔ min bɛ se ka sɛbɛn: Marka, fɛn dilannenw kunnafoniw ani u tɔgɔ sɛbɛnni taamasiyɛnw bɛ se ka fara a kan.

• Kurukuru hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye: A bonya, a janya, a kɔnɔna hakɛ ani a wulicogo bɛ se ka bɛn minɛnw ma.

• Otomatiki-layini bɛnkan: Rollo jɔli bɛ se ka labɛn walasa ka balo sabatilen sɔrɔ izini sanubɔlanw datugulan masinw kan.

• Furakɛli min bɛ se ka kɛ ka sisi kɛlɛ: A bɛ sɔrɔ dumuni nɛnɛma porozɛ sugandilenw na sɛgɛsɛgɛli kɔfɛ.

Lock-Seal Lidding Film ye mun ye?

Lock-seal film bɛ jɛɲɔgɔnya barikama walima a fanba la min tɛ se ka bɔ, o bɛ kɛ datugulan filimu ni sanubɔlan flange cɛ.

A bɛ sugandi ni foroko in bɛ a ɲini ka se ka da wuli kasaara la, ka bɔgɔ bɔ, ka yɛrɛyɛrɛ, ka a dalajɛ ani ka taa ni a ye.

Fɛnɲɛnɛma minnu bɛ datugu ni datugulan ye, olu bɛ se ka a ɲini baarakɛla fɛ a ka filimu tigɛ, k’a tigɛ walima k’a tigɛ walasa ka se ka fɛn dilannen sɔrɔ. A man kan ka feere i n’a fɔ ɲɛgɛn nɔgɔman fo ni a sirilan nɔgɔman dɔ labɛnna ka a sɛgɛsɛgɛ.

Kunnafonidila minnu bɛ ɲini ka kiliyanw da wuli ni kɔrɔsili ye, olu ka kan ka HSQY ka kunnafoniw lajɛ    nɔgɔya-peel sigicogo-filimu range.

Sanifɛnw minnu bɛ bɛn ɲɔgɔn ma

PETG sigilan dabɔra fɔlɔ ka ɲɛsin pakew yɔrɔw ma minnu bɛ se ka kɛ ni poliyesitɛri ye. Baara kɛcogo lakika bɛ bɔ sanubɔlan resin na, a kɔnɔfɛnw lasegincogo, a sanfɛla furakɛli, a flansɛ cogoya ani a datugucogo.

Sani sanubɔlan farikoloma ka kan ka di sani jagokɛla ka komandi ka dafa.

BOPET/PETG Lock-Seal Film ka baarakɛcogo

Dumuni labɛnnen nɛnɛma

Filimu bɛ se ka jateminɛ dumuni labɛnnen nɛnɛlenw na minnu bɛ pake PET walima PETG sanubɔlanw kɔnɔ minnu bɛ bɛn ɲɔgɔn ma, dadon barikama ka kan ka kɛ yɔrɔ minnu na.

Buuru ni Dessert Packaging

Filimu jɛlen walima sɛbɛnnen bɛ se ka kɛ gato, patisri, pudding, konfesiyɔn ani dumuni dumanw na minnu bɛ fɛn dilannenw yecogo wajibiya ani ka sanubɔlan datugu ka ɲɛ.

Nɔnɔmafɛnw foroko

A bɛ se ka kɛ foromazi tilayɔrɔw ye, nɔnɔmugu dumuniw ani nɔnɔmugu dumuni nɛnɛman wɛrɛw minnu bɛ kɛ poliyesitɛri sanubɔlan kɔnɔ min bɛ bɛn a ma.

Fɛn kuraw ni salatiw foroko

Filimu jɛlen bɛ se ka fɛnw jiracogo ɲɛ salatiw, jiridenw ani nakɔfɛnw na. Nka, ninakilifɛnw bɛ se ka kɛ sababu ye ka dawolo don walima ka gazi tali kɔlɔsi.

Fɛn minnu falen don ji la ani minnu bɛ taa ni u ye

Lock-seal film bɛ se ka sugandi ni a dabɔli kasaara, a yɛrɛyɛrɛ ani a pakew bɔli nafa ka bon ka tɛmɛ kunmabɔnafolo sɔgɔli nɔgɔya kan.

Dumunifɛnw foroko minnu tɛ dumuni ye

Baara minnu tɛ dumuni ye iziniw kɔnɔ walima minnu bɛ kɛ ka mɔgɔw balo, olu bɛ se ka jateminɛ u danma ni sanubɔlan fɛn, kemikɛlifɛnw ani u datugucogo ɲɛfɔra.

Furakɛcogo-minɛnw foroko man kan ka yiriwa nin dumuni-filimu sariyasen in kɔnɔ ni sterilize, saniya, tiɲɛni ani sariyasɛbɛnw ma fara ɲɔgɔn kan.

Yala BOPET/PETG filimu ye filimu ye min bɛ barika caman sɔrɔ wa?

BOPET/PETG lock-seal film standard man kan ka jate a yɛrɛma i n’a fɔ MAP film min barika ka bon.

BOPET bɛ kasa nafama ni gazi kɛlɛli di fɛn bɛɛ lajɛlen foroko ma, nka dumuni minnu bɛ oksizɛni sɔrɔ walima minnu bɛ fiɲɛ bila fɛn caman na, olu bɛ se ka kɛ sababu ye ka barikalan kɛrɛnkɛrɛnnen dɔ wajibiya.

Sugandili minnu bɛ kɛ ni barika caman ye, olu bɛ se ka baara kɛ ni ninnu ye:

• EVOH barikalan layɛrɛw

• AlOx walima SiOx dacogo jɛlenw

• Oksizɛni balilan kɛrɛnkɛrɛnnenw

• PET min bɛ kɛ ni nɛgɛ ye

• Laminatiw wɛrɛw minnu bɛ barika ka bon

MAP porozɛw ka kan ka oksizɛni tali hakɛ wajibiyalenw, ji ni jisuma hakɛ, gazi ɲagaminen, sanubɔlan barikalan ani a marali waati laɲinitaw ɲɛfɔ.

Kunnafonidila minnu bɛ EVOH-based barrier performance wajibiya, olu bɛ se ka HSQY ka baarakɛcogo lajɛ    PET/PE sigicogo-filimu hakɛ min ka barika ka bon.

Anti-Fog Sugandiliw

Furakɛli min bɛ kɛ ka sisi kɛlɛ, o ye ŋaniyata ye BOPET/PETG fura la min bɛ kɛ sisan, wa a ka kan ka dafa i n’a fɔ a ɲɛfɔcogo dɔ.

Furakɛli min bɛ kɛ ni sisi ye, o bɛ jisuma min bɛ kɛ ka dumuni kɛ, o jɛnsɛncogo Changer ka tɛmɛn filimu ɲɛ kan min ɲɛsinnen bɛ dumuni ma. A bɛ dɔ bɔ jikuru yelenw na nka a tɛ ji bɔ foroko kɔnɔ walima ka jisuma bali.

Baara kɛcogo bɛ bɔ ninnu na:

• Dumuni funteni fasa waati

• Fɛn dilannenw ka ji hakɛ

• Nɛnɛ teliya

• Fɛn min bɛ mara nɛnɛ na, o funteni

• A marali waati

• Filimu ɲɛsincogo

• Furakɛcogo min bɛ kɛ ka sisi kɛlɛ

Ni aw b’a fɛ ka sisi kɛlɛli jɔcogo kɛrɛnkɛrɛnnenw sɔrɔ minnu bɛ se ka bɔ nɔgɔya la ani minnu bɛ se ka datugu, aw bɛ HSQY ka sɛbɛnw lajɛ    PET/PE sigili filimuw minnu bɛ sisi kɛlɛ.

Micro-onde, Foro ani Congélateur Baara kɛ ni a ye

Yala BOPET/PETG filimu standard bɛ se ka kɛ mikro la wa?

Ayi, HSQY BOPET/PETG lock-seal film min bɛ kɛ sisan, o ma fɔ ko a bɛ se ka bila mikro la.

Mikɔrɔ-onde baarakɛcogo bɛ filimu jɔcogo danfaralen de wajibiya min sɛgɛsɛgɛra ni sanubɔlan yɛrɛ ye, dumuni, mikro-onde fanga, funteni waati ani watara bɔli cikanw.

Yala baara bɛ se ka kɛ ni filimu standard ye foro kɔrɔlen kɔnɔ wa?

Ayi, sisan fura min bɛ kɛ ka kɛɲɛ ni sariya ye, o tɛ se ka kɛ foro kɔnɔ.

Foro kɔnɔ baarakɛcogo kɔrɔw bɛ poliyesitɛri filimu kɛrɛnkɛrɛnnen dɔ de wajibiya min bɛ se ka kɛ foro kɔnɔ ani sanubɔlan min bɛ bɛn a ma i n’a fɔ CPET pakew dilanni sira min sɛgɛsɛgɛra.

Yala filimu bɛ se ka kɛ ni filimu ye min bɛ kɛ ni dumuni ye min bɛ kɛ ni nɛnɛ ye wa?

Sisan fura min bɛ kɛ ka kɛɲɛ ni sariya ye, o ma fɔ ko a bɛ se ka kɛ konfirɛzi kɔnɔ.

Dumuni minnu dilannen don ni nɛnɛ ye, olu bɛ filimu dɔ de wajibiya min sɛgɛsɛgɛlen don a danma, min bɛ se ka wuli ka bɔ a nɔ na, ​​min bɛ se ka wuli ka bɔ a nɔ na, ​​min bɛ se ka kɛ ni sigilan dafalen ye, min bɛ se ka sɔgɔsɔgɔ ani min bɛ se ka kɛ ni lamini ye.

Tray Sealing Machine Baarakɛcogo ɲuman

BOPET/PETG rollstock filimu bɛ se ka kɛ bololabaarakɛminɛnw kan, minnu bɛ kɛ ni otomatiki tilancɛ ye ani minnu bɛ kɛ otomatiki dafalen na, ni filimu hakɛw ni u sigicogo bɛ bɛn masin ma.

Sannikɛlaw ka kan ka ninnu di:

• Masina dilannikɛla ani a modɛli

• Sani moule ani cavity layout

• Filimu bonya wajibiyalen don

• Core kɔnɔna diameter

• Maximum roll kɛnɛma cɛmancɛ

• Rollo girinya hakɛ maksimali

• PETG sirili kɛrɛfɛ joginda kɔnɔna na walima kɛnɛma

• Film unwind ɲɛminɛni

• Siginidenw ka funteni hakɛ

• Daɲɛw sigicogo degun

• Sigi waati

• Fɛn dilanni teliya

• Filimu tigɛcogo

• I tɔgɔ sɛbɛnni-taamaʃyɛn jɔyɔrɔ min bɛ filimu sɛbɛnnen na

HSQY fana bɛ fɛnw dilan    dumunikɛminɛnw datugulan minnu    bɛ kɛ ka fiɲɛ datugucogo jɔnjɔnw kɛ ani MAP baarakɛcogo sugandilenw.

Cogo min na i bɛ se ka sigilan ɲuman sigi sen kan

Sigili finɛtiri ye funteni, degun ani sigi waati faralen ye ɲɔgɔn kan min bɛ da tugulen datugulen to senna k’a sɔrɔ a ma filimu walima sanubɔlan tiɲɛ.

Sɛnɛfɛnw dilanni sɛgɛsɛgɛli ka kan ka jateminɛ kɛ:

• Sigili daminɛ funteni hakɛ fitinin

• Funteni hakɛ min ka bon sani filimu walima sanubɔlan ka tigɛli ka kɛ

• Tansiyɔn min ka kan ka sigi sen kan

• Sigi waati nafama fitinin

• Hot-tack baarakɛcogo

• Aw bɛ sigi fanga nɛnɛ kɔfɛ

• Filimu tigɛcogo walima jɛɲɔgɔnya dɛsɛ

• A bɛ se ka ji danma, tulu walima dumuni nɔgɔli kunbɛn

• Kurukuruw ni kanal-jibɔcogo

• Filimu nɔfɛtaama ni a dilanni teliya ye

• Sanu-flange bεε bεε bε bεn

• Package leakage ani burst baarakɛcogo

Ka dɔ fara sigicogo funteni kan, o tɛ fura ɲuman ye tuma bɛɛ sigilan barikama na. Sanubɔlan bɛnkan, filimu ɲɛsincogo, degun, baarakɛminɛnw ɲɔgɔn sɔrɔli ani flansɛ nɔgɔli fana ka kan ka lajɛ.

BOPET/PETG sigicogo gɛlɛya minnu ka teli ka sɔrɔ

BOPET/PETG Film min sɛbɛnna ka kɛɲɛ ni mɔgɔw sago ye

BOPET bɛ sɛbɛnnikɛlan jɛlen, manamana ani a bonya sabatilen di sanubɔlan pakew ma minnu tɔgɔ sɛbɛnnen don.

Sɛbɛnni min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, o bɛ se ka kɛ ninnu ye:

• Marka logow

• Fɛn dilannenw tɔgɔw

• Fɛn minnu bɛ kɛ ka fɛnw kɛ ani balocogo kunnafoniw

• Ladilikanw marali ani a dabɔcogo

• Barcodes ani QR codew

• Sɛbɛnni taamasiyɛn minnu bɛ kɛ ka ɲɛsin otomatiki sanubɔlanw ma

• Ja minnu bɛ kɛ ka mɔgɔw laseli kɛ

A ka c’a la, filimu sɛbɛnnenw porozɛw bɛ ninnu wajibiya:

• Seko ni dɔnko dosiye minnu bɛ se ka ladilan

• Filimu dafalen bonya

• Segin-ka-bɔnye janya sɛbɛn

• Kulɛriw hakɛ

• Pantone walima kulɛri jiracogo minnu dabɔra

• Sɛbɛnni ɲɛminɛcogo

• I tɔgɔ sɛbɛnni-taamaʃyɛn jɔyɔrɔ

• Sani orientation dans le moule de sealing

• PETG sirili kɛrɛfɛ joginda kɔnɔna na walima kɛnɛma

• Dumuni-minɛnw ni nɔrɔli wajibiyalenw

Dumuni ni ɲɔgɔn cɛ siraw labatoli

Dumuni ni ɲɔgɔn cɛ bɛnnen bɛ bɔ BOPET resin tigitigi la, PETG layɛrɛ, nɔrɔlan, sisi kɛlɛli furakɛli, sɛbɛnnikɛlan, dumuni suguya, ɲɔgɔn sɔrɔli waati ani a maracogo.

Sannikɛlaw ka kan ka ninnu di:

• Taama jamana walima sugu

• Dumuni suguya

• Dumuni ni ɲɔgɔn cɛ cogoya tilennenw

• Kumaɲɔgɔnya waati

• Fali funteni

• Lamini walima nɛnɛ maracogo

• Filimu min sɛbɛnnen don walima min ma sɛbɛn, o wajibiyalen don

• Laseli wajibiyalenw walima jiginni sɛgɛsɛgɛli

• Fɛn dantigɛlenw wajibiyalenw

SGS sɛgɛsɛgɛli ni ISO 9001 jogoɲumanya-sɛnɛcogo seereyali man kan ka jate i n’a fɔ diɲɛ bɛɛ ka dumuniko sɔnni fɛnsɛbɛnni bɛɛ la. Sɛbɛn minnu bɛ tali kɛ o la, olu ka kan ka dafa jago filimu tigitigi kan ani baara kɛcogo laɲininen kan.

Yala BOPET/PETG filimu bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

BOPET ni PETG fila bɛɛ ye poliyesitɛri ye, nka o tɛ kɛ sababu ye ka BOPET/PETG lamini kɛ a yɛrɛma, min bɛ bɛn PET lasegincogo kɔrɔ bɛɛ ma.

PETG ye PET ye min sɛgɛsɛgɛra ni glycol ye, wa a bɛ se ka kɛ cogo wɛrɛ la ni PET ye min bɛ kɛ buteli kɔnɔ, a bɛ kɛ cogo wɛrɛ la, a sɛgɛsɛgɛli ni a labɛncogo kura waati.

Segin-ka-bɔnye lakika bɛ bɔ ninnu na:

• PETG hakɛ ni a kɛcogo

• BOPET ni PETG kɔnɔna na

• Laminasi nɔrɔlen

• Printing inks ni finiw

• Sani minɛnw

• Se ka dawolo ni sanubɔlan fara ɲɔgɔn kan

• Dumuni nɔgɔli

• Sigida lajɛw ni u tila-tilacogo

• Destination-market recyclage laadilikanw

Segin-ka-bɔnye walima PET-stream compatibility claim ka kan ka kɛ dɔrɔn ni pake dafalen tɛmɛna design-for-recyclage jateminɛ bɛnnen na.

Sugandili minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

• Custom total film thickness

• BOPET ni PETG layɛrɛ hakɛ ladamulen

• Custom lock-seal fanga

• Filimu ladamulen bonya

• Custom roll janya

• Diamètre core ladamu

• Custom maximum roll diameter ani girinya

• Custom winding sira

• Furakɛli min bɛ kɛ ni sisi ye min bɛ se ka kɛ ni ŋaniya ye

• Sɛbɛnni ni sɛbɛnni taamasiyɛnw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

• Custom gloss walima matte yecogo

• A jɔcogo min bɛ se ka sɔgɔsɔgɔ

• Barrikuluba jɔli i n’a fɔ yiriwali porozɛ danfaralen

• Kartonw, labeliw ani export pallets ladamulenw

Jogoɲumanya Kɔlɔsili

Fɛn minnu bɛ tali kɛ jogoɲini na, olu bɛ se ka kɛ ninnu ye:

• BOPET ni PETG ka fɛnw sɛgɛsɛgɛli

• Filimu bɛɛ lajɛlen girinya ni a muɲuni

• Layɛrɛ kelen-kelen tilatilali ni a ɲɛfɔra

• Rollo bonya ni a janya

• Core size ani kɛnɛma roll diameter

• Winding tension ani roll alignment

• Transparence, haze ani gloss

• Surface sɔgɔsɔgɔninjɛ, jeliw ani nɔgɔ

• Lamination-bond fanga

• Solvant tolen ni a bɛ kɛ

• Siginiden-daminɛ kɛcogo

• Lock-seal fanga

• Leak ni burst resistance (jibɔ ni pɛrɛnni kunbɛnni).

• Puncture ni tensile baarakɛcogo

• Anti-fog sɛgɛsɛgɛli ni a ɲɛfɔra

• Print kulɛri ani sɛbɛnni kɛcogo ɲuman

• Dumuni ni ɲɔgɔn cɛ sɛbɛnw lajɛ

• Foroko ni palɛti lakanani

Foroko, mara ani Dugukolo kan fɛnw cili

BOPET/PETG filimu kurulenw ka kan ka tanga buguri, ji, sɔgɔli, funteni kojugu ani kurukuru dakun tiɲɛni ma.

Foroko suganditaw bɛ se ka kɛ ninnu ye:

• Kɔnɔna bɔrɔ minnu bɛ mɔgɔ tanga

• Roll-end lakanabagaw

• Kartɔn kelen-kelen minnu bɛ taa ni u ye jamana wɛrɛw la

• Batch ani specification labels (daɲɛw ɲɛfɔcogo).

• Pallet stretch (palɛti sɔgɔli) sirili

• Nkɔni ni dakun lakanani

• Fumigation-free export pallets (fɛnw bɔli palɛtiw).

• Ladamuni taamasiyɛnw

Kurukuruw ka kan ka mara u foroko fɔlɔ kɔnɔ yɔrɔ saniyalen ni jalen na, yɔrɔ min ka jan tile yeelen tilennen na, funteni kojugu, nɛnɛba ani farikolo tiɲɛni.

Mun na i bɛ HSQY sugandi ka kɛ i ka BOPET/PETG filimu dilabaga ye?

• Kɔlɔsili-sigicogo ɲɛfɔlen : Sisan fura min bɛ kɛ ka kɛɲɛ ni sariya ye, o bilalen bɛ sigicogo barikama kama sanni ka kɛ fɛn ye min bɛ kɛ ni fɛn bɛɛ ye min bɛ kɛ ni fɛn ye min bɛ se ka bɔ nɔgɔya la.

• Ladamucogo : Filimu bɛ se ka dilan sisan 52–90 μm jateminɛ hakɛ kɔnɔ.

• Rollo-bonya hakɛ : A bonya bɛ se ka jateminɛ ka bɔ milimɛtɛrɛ 150–900 ɲɔgɔn na.

• Sɛbɛnni kɛcogo ladamu: Logow, ja, kunnafoniw ani tɔgɔsɛbɛnni taamasiyɛnw bɛ se ka fara a kan.

• Bugun kɛlɛli fɛɛrɛ min bɛ se ka sugandi: Bugun kɛlɛli furakɛli bɛ se ka kɛ dumuni nɛnɛma porozɛ sugandilenw na.

• Sani ni filimu bɛnkan: Ladilikanw bɛ se ka sinsin sanubɔlan farikolo tacogo misaliw kan ani sigicogo sɛgɛsɛgɛliw kan.

• Masina bɛnkan dɛmɛni: Kurukuru hakɛ ni a jiginni sira bɛ se ka bɛn sanubɔlan datugulan ma.

• Kɔrɔbɔli dɛmɛni: Baro bɛ se ka kɛ misali filimu walima kɔrɔbɔli sɛbɛnfura kan sani u ka dilan jamaba kɔnɔ.

• Foroko dafalenw dilancogo : HSQY bɛ PET sanubɔlanw, PET/PE sanubɔlanw, CPET sanubɔlanw ani sanubɔlanw datugulanw fana dilan.

• Jagokɛyɔrɔ baara: Kartɔn, palɛti ani diɲɛ kɔnɔ fɛnw cicogo wajibiyalenw bɛ se ka bɛn ɲɔgɔn ma.

Kunnafoni minnu ka kan ka kɛ walasa ka Quotation sɔrɔ

Walasa ka filimu ladilikan ni quotation tigitigi sɔrɔ, aw bɛ se ka:

• Sani minɛn ani a jɔcogo dafalen

• Fɛn min bɛ sanubɔlan datugulan kan

• Farikolo sanubɔlanw misaliw

• Sani hakɛw ni flansɛ bonya

• Dumuni walima fɛn min bɛ pake kɔnɔ

• Fali funteni

• Lamini walima nɛnɛ maracogo

• A wajibiyalen don lock-seal barika la

• Anti-fog wajibiyalen don

• Barrière walima MAP wajibiyalen don

• Filimu janya wajibiyalen don

• Filimu bonya ni a roll janya

• Core kɔnɔna diameter

• Maximum roll kɛnɛma cɛmancɛ

• PETG sigili kɛrɛfɛ winding sira

• Tray sealing machine dilabaga ani a modɛli

• Sisan sigili funteni, tansiyɔn ani sigili waati

• Fɛn dilanni teliya

• Filimu min sɛbɛnna walima min ma sɛbɛn

• Seko ni dɔnko baara ni sɛbɛnni seginni janya

• Dumuni ni ɲɔgɔn cɛ sɛbɛnw wajibiyalenw

• Koman hakɛ ani san o san a tacogo

• Jamana min bɛ taa, kurunbonkarila walima fɛnw lase ladɛrɛsi

Ɲininkali minnu bɛ kɛ tuma caman na BOPET/PETG Lidding Film kan

BOPET/PETG sigili filimu bɛ dilan ni mun ye?

O ye lamini ye min bɛ BOPET kɛnɛma-yɔrɔ ni PETG tray-contact heat-seal layɛrɛ fara ɲɔgɔn kan.

BOPET layɛrɛ bɛ mun kɛ?

BOPET bɛ masin fanga di, kɛnɛya, kɛnɛya, hakɛ sabatili ani kɛnɛma yɔrɔ min bɛ se ka sɛbɛn.

PETG layɛrɛ bɛ mun kɛ?

PETG bɛ baara kɛ i n’a fɔ funteni-sigilan ani a bɛ jɛɲɔgɔnya barikama kɛ ni poliyesitɛri basigilen sarɛtiw ye minnu bɛ bɛn ɲɔgɔn ma.

Yala HSQY filimu standard ye peel nɔgɔn ye wa?

Ayi, sisan BOPET/PETG fɛn min bɛ kɛ ka kɛɲɛ ni sariya ye, o ye filimu ye min bɛ datugu ni datugulan ye, min dilannen don pakew datugucogo barikama kama.

Danfara jumɛn bɛ lock seal ni easy peel cɛ?

Lock seal bɛ dadon barikama walima dadon banbali dɔ lawuli. Filimu min bɛ bɔ nɔgɔya la, o dilannen don kɛrɛnkɛrɛnnenya la bololabaara da wulicogo kɔrɔsilen kama.

Yala filimu bɛ se ka PETG sanubɔlanw datugu wa?

PETG sanubɔlanw ye kandida fɔlɔ ye, nka u bɛnkan ni u sigicogo fanga ka kan ka sɛgɛsɛgɛ hali bi ni sanubɔlan yɛrɛ ye.

Yala BOPET/PETG bɛ se ka APET sanubɔlanw datugu wa?

A bɛ se ka APET sanubɔlanw datugu, nka sanubɔlan resin, a kɔnɔfɛnw minnu bɛ segin ka kɛ fɛn wɛrɛw ye, u sanfɛla cogoya ani u datugulan finɛtiri ka kan ka jateminɛ.

Yala a bɛ se ka rPET sanubɔlanw datugu wa?

Bɛnkan bɛ se ka kɛ nka a ka kan ka kɔrɔbɔ bawo fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye ani u sanfɛla caman ɲɔgɔnna bɛ se ka nɔ bila sigilan baarakɛcogo la.

Yala a bɛ se ka PET/PE sanubɔlanw datugu wa?

A bɛ se ka kɛ a tɛ jɔcogo ɲuman ye ni sanubɔlan flansɛ bɛ ni PE sigilan ye. A ka c’a la, PET/PE walima BOPET/PE datugulan filimu bɛnnen don kosɛbɛ PE yɔrɔ la.

Yala a bɛ se ka PP walima PS sanubɔlanw datugu wa?

Standard compatibilité man kan ka jate. A ka c’a la, PP ni PS sanubɔlanw mago bɛ sigilan kɛrɛnkɛrɛnnenw na.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

Sisan, a hakɛ bɛ se 52–90 μm ma, ni a janya bɛ se ka kɛ ka kɛɲɛ ni a yɛrɛ sago ye.

Rollo bonya jumɛnw bɛ sɔrɔ?

A ɲɛfɔli yɔrɔ bɛ Taa milimɛtɛrɛ 150–900 ɲɔgɔn na. A bonya sugandilenw ye milimɛtɛrɛ 180, milimɛtɛrɛ 320, milimɛtɛrɛ 400 ani milimɛtɛrɛ 640 ye.

Rollo janya min bɛ kɛ ka kɛɲɛ ni sariya ye, o ye mun ye?

Reference roll janya bɛ se mɛtɛrɛ 500 ma, ni ladamu janya bɛ sɔrɔ.

Yala sisi kɛlɛli furakɛli bɛ se ka kɛ wa?

Furakɛli min bɛ kɛ ka sisi kɛlɛ, o ye ŋaniyataama ye, wa a ka kan ka dafa i n’a fɔ fɛn dɔ min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Yala BOPET/PETG filimu standard bɛ barika ka bon wa?

A man kan ka jate a yɛrɛma ko barika ka bon. MAP baarakɛcogo bɛ se ka kɛ ni EVOH wɛrɛ ye walima barikalan wɛrɛ.

Yala filimu standard bɛ se ka kɛ mikro la wa?

Ayi, sisan fura min bɛ kɛ ka kɛɲɛ ni sariya ye, o ma fɔ ko a bɛ se ka bila mikro la.

Yala filimu standard bɛ se ka kɛ foro kɔnɔ wa?

Ayi, filimu kɛrɛnkɛrɛnnen min bɛ se ka kɛ foro kɔnɔ ani sanubɔlan min bɛ bɛn o ma, olu de ka kan ka kɛ foro kɔnɔ baarakɛcogo kɔrɔw la.

Yala filimu jɔnjɔn bɛ se ka kɛ dumuni sumalenw na wa?

Sisan fura min bɛ kɛ ka kɛɲɛ ni sariya ye, o ma fɔ ko a bɛ se ka kɛ konfirɛzi kɔnɔ. Fɛn min bɛ kɛ ni konfirɛzi ye, o ka kan ka sɛgɛsɛgɛ.

Mun na filimu tɛ siri sanubɔlan na?

A sababu minnu ka teli ka sɔrɔ, olu ye sanubɔlan sanfɛla tɛ bɛn, filimu kɔseginlen, funteni bɛrɛbɛrɛ, degun bɛrɛbɛrɛ walima a sigili waati kunkurunnin.

Mun na o pake bɛ bɔgɔbɔgɔ?

Dumuni bɔgɔbɔgɔli bɛ se ka sɔrɔ dumuni nɔgɔli fɛ flansɛ kan, kurukuruw, sɔgɔsɔgɔninjɛ, kanal bɔli, sanubɔlanw karilen walima dasiri dafalen tɛ.

Yala o filimu bɛ se ka sɛbɛn ka kɛɲɛ ni mɔgɔw sago ye wa?

Awɔ. Logow, fɛn dilannenw kunnafoniw, barɔdiw, QR codew ani tɔgɔsɛbɛnni taamasiyɛnw bɛ se ka sɛbɛn ka kɛɲɛ ni seko ni dɔnko baara minnu dabɔra.

Yala BOPET/PETG filimu bɛ se ka segin ka kɛ ni PET sanubɔlanw ye wa?

A man kan ka fɔ a yɛrɛma ko a bɛ bɛn PET lasegincogo kɔrɔlen ma. Foroko dafalen bɛ sugu kɛrɛnkɛrɛnnenw ka segin-ka-bɔnye jateminɛ de wajibiya.

MOQ ye mun ye?

Sisan MOQ min bɛ tali kɛ a la, o bɛ kilo 1000 ɲɔgɔn bɔ fɛnsɛbɛnni kelen-kelen bɛɛ la.

A dilanni ɲɛminɛ waati ye mun ye?

Reference lead time bɛ tile 10–15 ɲɔgɔn bɔ deposit ni technique specifications dafalen kɔfɛ.

Yala ne bɛ se ka misali walima kɔrɔbɔli sɛbɛn ɲini wa?

Baro bɛ se ka kɛ misali filimu walima kɔrɔbɔli rolls kan walasa ka sanubɔlan bɛnkan, lock-seal fanga, masinw baloli ani leakage testing.

Aw ye BOPET/PETG Lidding Film Quote ɲini

Aw bɛ BOPET/PETG lidding-film dilannikɛla ɲini, PETG sealant film feerela walima lock-seal film PET sanubɔlanw kama wa?

Aw bɛ se ka kuma HSQY fɛ walasa ka fɛɛrɛko ladilikanw ɲini, sanubɔlanw bɛnkan sɛgɛsɛgɛli, kɔrɔbɔli sɛbɛnfura, sɛbɛnni kɛcogo ladamulen, sɛbɛnfura ɲɛfɔli, izini sɔngɔ ani diɲɛ kɔnɔ cikanw.

       Quote (Quote) dɔ ɲini