Films de lamination métal

Metal Lamination Films ye mun ye?

Nɛgɛ lamini filimuw ye fɛn caman ye minnu bɛ nɛgɛ finman dɔ don a kɔnɔ, a ka c’a la, aliminiyɔmu, min sirilen don ni polimɛriw ye i n’a fɔ poliyetilɛni (PE) walima poliyesitɛri (PET).
O filimuw dilannen don walasa ka barika tanga kosɛbɛ ji, yeelen ani gaziw ma, o b’a to u ka ɲi kosɛbɛ pakew dilanni na ani iziniw kɔnɔ.
U ka yeelenbɔcogo ni u ka tocogo fana bɛ ɲɛnajɛko ɲɛ ani ka fɛn dilannenw marali bonya.

Nɛgɛ jumɛnw de bɛ kɛ ka caya o filimuw kɔnɔ?

Aluminiyɔmu ye nɛgɛ ye min bɛ kɛ ka caya k’a sababu kɛ a barika ka ɲi kosɛbɛ ani a musaka ka dɔgɔ.
Tuma dɔw la, nɛgɛ walima nɛgɛ wɛrɛw bɛ kɛ ka ɲɛsin fɛnw tacogo kɛrɛnkɛrɛnnen ma walima ka u masiri.
A ka c’a la, nɛgɛdaga bɛ kɛ ni vacuum metallization walima foil lamination ye, ka kɛɲɛ ni a kɛcogo wajibiyalenw ye.

Nafa jumɛnw bɛ Metal Lamination Films la?

Nɛgɛ lamini filimuw bɛ lakana kɛrɛnkɛrɛnnen di sigida fɛnw ma, ka fɛnw marali waati janya i n’a fɔ dumuni, furaw, walima ɛntɛrinɛti.
U ka barika caman bɛ oksizɛni, ji ani UV yeelen bali, o bɛ a to fɛn dilannenw ka dafa.
Ka fara o kan, filimuw ka nɛgɛ yeelen bɛ dɔ fara u ɲɛnafin kan, o b’a to u bɛ kɛ sugandili ye min ka di mɔgɔw ye kosɛbɛ pakew dilanni ni u taamasiyɛn ɲumanw na.

Yala o filimuw bɛ mɛn walasa ka baara kɛ ni u ye iziniw kɔnɔ wa?

Ɔwɔ, nɛgɛ lamini filimuw bɛ mɛn kosɛbɛ, u bɛ se ka sɔgɔsɔgɔ, ɲɛjibɔ ani kemikɛlifɛnw tiɲɛni kɛlɛ.
U jɔcogo barikama b’a to u bɛnnen don baara gɛlɛnw ma, i n’a fɔ fɛnw minnu bɛ u tanga, fɛnw minnu bɛ kɛ sanfɛla la, walima fɛnw foroko gɛlɛnw.
Nɛgɛ ni polimɛri layiniw faralen ɲɔgɔn kan, o bɛ fanga ni fɛn caman sɛgɛsɛgɛ.

Metal Lamination Films bɛ dilan cogo di?

Sɛnɛfɛnw dilanni bɛ Kɛ ni fɛɛrɛw ye i n’a fɔ nɛgɛdaga (vacuum metallization), nɛgɛdaga finman dɔ bɛ bila polimɛri substrat (polimɛri substrat) kan, walima lamination (lamination), nɛgɛ-minɛn bɛ siri yɔrɔ min na ni fɛn wɛrɛw ye.
Co-extrusion walima adhesive bonding bɛ kɛ ka fɛn caman dilan minnu bɛ kɛ ka kɛɲɛ ni u yɛrɛ sago ye.
Sɛbɛnni fɛɛrɛ kɔrɔw, i n’a fɔ gravure walima flexography, bɛ se ka kɛ walasa ka taamasiyɛn kɛ walima ka taamasiyɛn kɛ baarakɛcogo la.

O filimuw bɛ jogoɲumanya sariya jumɛnw dafa?

Nɛgɛ lamini filimuw dilannen don walasa ka izini sariya gɛlɛnw labato, i n’a fɔ ISO 9001 ani FDA ka sariyaw minnu bɛ dumuni ni ɲɔgɔn cɛ.
U bɛ kɔrɔbɔ barika baarakɛcogo la, u nɔrɔli fanga la, ani fɛnw lakanani na walasa ka dannaya sɔrɔ.
Tuma caman na, so saniyalenw dilanni bɛ kɛ baarakɛminɛnw na minnu bɛ saniya kosɛbɛ, i n’a fɔ furakɛli walima ɛntɛrinɛti foroko.

Metal Lamination Films bɛ baara kɛ ni baara jumɛnw ye?

O filimuw bɛ kɛ izini suguya caman na, i n’a fɔ dumuni foroko minnu bɛ kɛ fɛnw ye i n’a fɔ kafe, dumuni misɛnninw, ani fɛn minnu bɛ kɛ nɛnɛ na, u bɛ kɛnɛya sabati yɔrɔ minnu na.
Furakɛminɛnw na, u bɛ furaw tanga ji ni yeelen ma minnu bɛ kɛ kurukuruw walima foroko kɔnɔ.
U bɛ baara kɛ fana ɛntɛrinɛti kan walasa ka fɛnw lakana minnu bɛ se ka fɛnw sɛgɛsɛgɛ ani ka baara kɛ ni fɛnw ye minnu bɛ fɛnw tanga ani minnu bɛ yeelen bɔ.

Yala o filimuw bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye wa?

Tiɲɛ na, nɛgɛ lamini filimuw bɛ se ka kɛ ka kɛɲɛ ni mago kɛrɛnkɛrɛnnenw ye.
Sugandili minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu ye nɛgɛ janya caman ye, polimɛri suguyaw, walima sanfɛla finiw i n’a fɔ matte walima glossy.
Fɛn kɛrɛnkɛrɛnnenw fana bɛ se ka don a kɔnɔ, i n’a fɔ dakun minnu bɛ se ka datugu kokura walima minnu bɛ se ka sɔgɔsɔgɔ, olu fana bɛ se ka don a kɔnɔ walasa ka pake kɛrɛnkɛrɛnnenw walima iziniw ka ɲininiw dafa.

Metal Lamination Films bɛ sabatili dɛmɛ cogo di?

Bi nɛgɛ lamini filimuw dilannen don ni sabatili ye, u bɛ baara kɛ ni nɛgɛdaga finmanw ye walasa ka dɔ bɔ fɛnw ta la.
Filimu dɔw bɛ polimɛriw don minnu bɛ se ka segin ka kɛ fɛn wɛrɛw ye walima u bɛ bɛn ni fɛnw ye minnu bɛ se ka segin ka kɛ fɛn wɛrɛw ye, ka kɛɲɛ ni sigida ka fɛnsɔrɔsiraw ye.
U ka nɔgɔn cogoya bɛ bolifɛnw ka fɛnɲɛnamafagalanw bɔli dɔgɔya, o bɛ kɛ sababu ye ka pakew dilanni ni izini fɛɛrɛw tigɛ minnu tɛ fɛnɲɛnamaw tiɲɛ.