HSQY Furakɛcogo Grade Rigid PVC Filimu min bɛ kɛ ni kurukuruw ye

Furakɛcogo Grade Rigid PVC Filimu min bɛ kɛ ni kurukuruw ye

HSQY furakɛli grade rigid PVC filimu dabɔra ka kɛ furakisɛw, furakisɛw ani fura tata hakɛ gɛlɛn wɛrɛw foroko ye min dilannen don ni funteni ye. Filimu bɛ dilancogo gɛlɛn di min bɛ kɛ ka kurukuruw dilan sani a ka fa ani ka a datugu ni fura datugulan ye min bɛ bɛn a ma.

Sisan HSQY-210616 ka fɛn dilannenw bɛ tɔgɔlafɛnw janya k’a ta milimɛtɛrɛ 0,12 na ka se milimɛtɛrɛ 0,30 ma ni kulɛri sugandilenw ye minnu jɛlen don, minnu ka fin ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. Rollo hakɛw bɛ se ka ladilan ka kɛɲɛ ni blister-packaging machine ye, baarakɛminɛnw labɛncogo ani sanni kɛcogo min dabɔra.

A ka c’a la, PVC gɛlɛn gansan bɛ sugandi yɔrɔ minnu na, thermoforming dannamɔgɔ, fɛn ɲɛnamaw sɛgɛsɛgɛli, web minɛcogo basigilen ani blister bɔli sɔrɔko siratigɛ la, o de ka kan ka kɛ. Fura minnu PVC ji walima oksizɛni balilan caman PVDC , PVC ka kan ka jateminɛ kɛ PVDC danma.

       Furakɛcogo ɲinini PVC Film Quote    

Furakɛcogo PVC Blister Film Wideyo

Furakɛcogo PVC Blister Film ye mun ye?

Furakɛcogo PVC kurukuru filimu ye funteni-minɛn gɛlɛn ye min bɛ kɛ i n’a fɔ kɔnɔnatumu-minɛnw kurukuruw foroko kɔnɔ. Foroko kɛtuma na, PVC web bɛ sumaya, ka kɛ dingɛw ye, ka fa ni furakisɛw walima furakisɛw ye, ka sɔrɔ ka u datugu ka u da datugulan dɔ kan min bɛ bɛn a ma.

Fura caman tigɛlikɛlaw ta fan fɛ, filimu sugandili tɛ kɛ ka da a bonya dɔrɔn kan. Fɛn nafamaw ye fɛn dilanni kɛcogo ye, a hakɛ sabatili, a dɔgɔyali, a sanfɛla cogoya, a wulicogo flakɛ, a kulɛri bɛ kɛ cogo min na, a kɔnɔna hakɛ, a wulicogo ɲuman ani a ni blister machine ni lidding system bɛ bɛn.

Fɛn laban ɲɛfɔli ka kan ka sɔn fura tigitigi, kurukuruw dilanni, pakew dilanni sira, taayɔrɔ suguya ani sariyaw wajibiyalenw sani jago ka dilan.

Furakɛcogo PVC Filimu gɛlɛnw ja

Furakɛcogo PVC Filimu ɲɛfɔli

O ɲɛ in tun bɛ PVC tabali dɔ sɔrɔ fɔlɔ min bɛ kɛ ni 0,07–6mm ye ani baarakɛcogo minnu tɛ furakɛli ye. Nin furakɛlifɛn in na, sisan fura hakɛ kunnafoni ye milimɛtɛrɛ 0,12–0,30 ye. Tolerances labanw ni roll specifications ka kan ka dafa fɛɛrɛko specification kɔnɔ min dabɔra.

Fɛn minnu ka kan ka kɛ furaw la PVC Blister Film

Thermoforming (Tɛrmoforming) min bɛ kɛ tuma bɛɛ

Furakɛcogo PVC filimu ka kan ka kurukuruw dilan minnu bɛ kɛ tuma bɛɛ, funteni ni u dilanni cogoya dafalenw na. Foroko kɛcogo bɛ bɔ filimu hakɛ la, a bonya, a kɔnɔna jateminɛcogo, a sofa dilanni, a layini teliya ani a dilanni degun.

Kɛrɛnkɛrɛnnenya la, Uniformité

Jateminɛ caman ɲɔgɔnna bɛ se ka nɔ bila dingɛw jɔli la, web tension, dasirili ani kurukuru labanw kɛcogo. O la, a bonya tɔgɔlama ni a muɲuli ka kan ka don sannifeere sɛbɛn kɔnɔ min dabɔra.

Ɲɛkisɛ jɛlen (Clarity optique).

Furakɛcogo jɛlen PVC bɛ a to fura tata hakɛ sɛbɛnnen bɛ to ka ye walasa ka a sɛgɛsɛgɛ ani ka a dɔn. Sisi, kɛnɛya ani dugukolo sanfɛla nafamafɛnw ka kan ka kɔlɔsi ka kɛɲɛ ni fɛn dilannenw ka sariya ye min dagalen don.

Dimensionnel (daɲɛw sabatili) sabatili

Web hakɛ sabatilenw bɛ dɛmɛ ka sɛbɛnni, dingɛ jɔyɔrɔ, sigili tiɲɛni ani baarakɛcogo dafalen sabati furakɛli kurukuruw-pake minɛnw kan.

Dɔgɔyali min bɛ Kɔrɔsi

Ni a dɔgɔyara kojugu funteni waati, o bɛ se ka nɔ bila cavity geometry ni a sɛbɛnni na. Funteni kɛcogo ka kan ka tiɲɛ ni kurukuru-sira dilancogo funteni ni teliya yɛrɛ ye.

Saniya Surface ani Roll Quality

Fura caman tigɛlikɛlaw ka kan ka dan minnu bɛ sɔn ka kɛ nɔgɔ, nɔgɔ nɛrɛmuguma, jeli, sɔgɔsɔgɔninjɛ, bugun, balili, dakun tiɲɛni, kuruli, teleskɔpi ani nafamafɛn wɛrɛw la minnu bɛ se ka nɔ bila pakew-la-baara la walima kurukuru dafalenw yecogo la.

Furakɛcogo PVC Blister Pakew dilanni taabolo

Plain PVC vs. Furakɛcogo blister films minnu bɛ barika caman sɔrɔ

Plain rigid PVC ye thermoforming material ye min bɛ sɔrɔ, nka a tɛ ji walima oksizɛni lakanani di i n’a fɔ blister structures kɛrɛnkɛrɛnnenw minnu bɛ barika caman sɔrɔ. O la, filimu sugandili ka kan ka daminɛ ni furakɛlifɛn sabatili wajibiyalenw ye.

Barika jɔcogo ka kan ka sugandi ka bɔ furakɛli sabatili kunnafoniw na sanni ka miiri ko barika min ka bon kosɛbɛ, o de ye a yɛrɛma fura ɲuman ye walima min bɛ sɔrɔ sɔrɔ kosɛbɛ.

Homopolimɛri ni Kopolimɛri PVC ka ɲɛsin Blister Forming ma

HSQY ka kan ka PVC furakɛcogo tigitigi dafa min dira porozɛ in kama sanni ka furakɛli PVC bɛɛ ɲɛfɔ iko diɲɛ bɛɛ ka kalasi kelen.

Furakɛcogo PVC Blister Film baarakɛcogo

Tablɛti Blister Foroko

Filimu gɛlɛn PVC bɛ kɛ ka caya i n’a fɔ thermoformed cavity web for unit-dose tablet blister packs yɔrɔ minnu na fura sabatili cogoya dagalen bɛ sira di PVC pake gansanw ma.

Kapisilɛri Blister Packaging

A ka ca a la, furakisɛw bɛ dingɛ jugumanw de wajibiya ka tɛmɛ furakisɛ misɛnniw kan, o la, foroko juguya, filimu jateminɛnan, kɔnɔna jateminɛcogo ani PVC hakɛ ka kan ka jateminɛ ɲɔgɔn fɛ.

OTC ani Nutraceutique Blisters (Blisters Nutraceutiques) ye

Furakɛcogo gɛlɛnw PVC hakɛ bɛnnenw fana bɛ se ka jateminɛ furaw la minnu tɛ sɔrɔ dɔgɔtɔrɔso la, witaminiw ani balofɛnw foroko gɛlɛnw ka kɛɲɛ ni fura sabatili ni suguya magow ye.

Aplikasi Jaw fɔlɔw

Nin ja ninnu bɛ mara ka bɔ ɲɛ fɔlɔ la. Furakɛcogo kurukuruw foroko ye SEO ni fɛn dilannenw sinsinnan fɔlɔ ye nin ɲɛ in na; PVC baarakɛcogo wɛrɛw ka kan ka jate i n’a fɔ fɛnw seko minnu bɛ tali kɛ ɲɔgɔn na sanni ka kɛ furakɛlifɛnw jɔyɔrɔba ye.

Furakɛcogo sugandicogo PVC Blister Film

1. Aw bɛ fura tata hakɛ ɲɛfɔ

Aw bɛ a jira ni furakisɛw, furakisɛw, balofɛnw walima fura tata hakɛ gɛlɛn wɛrɛ bɛ foroko kɔnɔ, ka fara a tata hakɛw kan.

2. Aw bɛ Barika hakɛ wajibiyalen dafa

Aw bɛ furakɛli sabatili kunnafoniw kɛ walasa k’a dɔn ni PVC gansan bɛ lakana bɛrɛbɛrɛ di walima ni PVDC , PCTFE, aliminiyɔmu nɛnɛma walima fɛn wɛrɛ min bɛ se ka barika bonya, o de ka kan.

3. Aw bɛ filimu janya jira

HSQY-210616 ka fɛn dilannenw hakɛ bɛ sɛbɛn sisan 0,12–0,30mm. Aw bɛ jateminɛ kɛ ka kɛɲɛ ni kɔnɔna juguya ye, ka kɛɲɛ ni web gɛlɛya ye, ka kɛɲɛ ni foroko cogoyaw ye ani pake-masin wajibiyalenw.

4. Aw bɛ Blister Cavity Ja di

Kɔnɔna janya, a bonya, a juguman, a nkɔni janya ani a ja hakɛ bɛ nɔ bila funteni-sɛnɛ kɛcogo la, wa u ka kan ka jateminɛ fɛnw sugandili waati.

5. Aw bɛ Blister Machine (Blister Machine) kunnafoni di

Aw bɛ masin dilannikɛla, a modɛli, rotary walima flat-bed forming system, web bonya, core requirement, line speed ani sisan baarakɛcogo di.

6. Aw bɛ a lajɛ ni Lidding Foil bɛ bɛn ɲɔgɔn ma

PVC foroko web ka kan ka baara kɛ ni furakɛli dakun sugandilen ye ani funteni-sigilan. Dadon laban funteni, tansiyɔn ani sigili waati ka kan ka sɛgɛsɛgɛ sɛnɛfɛnw dilanni sira kan.

7. Aw bɛ Kulɛri ni yeelen lakanani wajibiyalenw ɲɛfɔ

PVC jɛlen walima kulɛrilen ka kan ka sugandi ka kɛɲɛ ni fɛn dilannenw yecogo ye, a taamasiyɛn ani yeelen lakanani wajibiyalenw. Aw kana UV lakanani fɔ fo ni a hakɛ tigitigi min dira aw ma, o dabɔra ani ni a sɛbɛnna o baara kama.

8. Aw bɛ furakɛli sɛbɛnw dafa

Aw ye sisan fɛɛrɛko, jogoɲumanya ani sariyasɛbɛnw ɲini minnu bɛ kɛrɛnkɛrɛnnenya la PVC grade tigitigi dilen ani fɛn dilanni yɔrɔ ɲɛfɔ min wajibiyalen don taa sugu la.

Blister Machine ani Roll ka ɲɛfɔli

Kurukuruw cogoya ka kan ka bɛn furakɛli kurukuruw masin ma sanni ka komandi kɛ filimu janya dɔrɔn fɛ.

Quality-Control Paramètres ka kan ka dafa

• Janya: Jatebɔlan tɔgɔlama ani a dilanni muɲuli.

• Bonya: Slit bonya ani muɲuli yamaruyalen.

• Density: Aw bɛ a ɲɛfɔcogo dafa furakɛlicogo tigitigi kan.

• Sumaya dɔgɔyali : Aw bɛ jateminɛ kɛ funteni ni waati cogoyaw la minnu bɛnna.

• Formability: Aw bɛ cavity formation valide masin ni baarakɛminɛn laɲininen kan.

• Kɔrɔya ni sisi: Aw bɛ yecogo kɔlɔsi walasa ka furaw hakɛ jɛlenw sɔrɔ.

• Surface défauts : Aw bɛ danw ɲɛfɔ nɔgɔ nɛrɛmugumaw, jeliw, sɔgɔsɔgɔninjɛw, layiniw, bugunw ani nɔgɔw la.

• Flatness and Curl: A nafa ka bon ɛntɛrinɛti nɔfɛtaama ni blister-machine sabatili la.

• Blocking and Slip: A bɛ nɔ bila unwind ni teliya baarakɛcogo la.

• Kulɛri : Aw bɛ bɛnkansɛbɛn dɔ kɛ fura kulɛrilenw na PVC .

• Roll Quality: Aw bɛ winding, edge alignment, joints, telescoping ani core cogoya sɛgɛsɛgɛ.

• Traceability: Batch identification ani roll labels ka kan ka bɛn jogoɲumanya sɛbɛnw ma minnu bɛnna.

Tekniki Donanw ani PDF Sɛbɛn fɔlɔw

Nin PVC fɛɛrɛsɛbɛnw bɛ sɔrɔ ɲɛ fɔlɔ la. U ka dosiye tɔgɔw bɛ PVC sɛbɛnfura min bɛ kɛ walima filimu kunnafoniw jira, o la fura sanbagaw ka kan ka sisan fura kɛrɛnkɛrɛnnenw sɛbɛnw ɲini HSQY-210616 kama sani u ka se ka se sɔrɔ.

           PVC sɛbɛn jɛlen Kunnafoni-sɛbɛn.pdf    

           PVC Filimu kunnafonisɛbɛn jɛlen.pdf    

           PVC sɛbɛnfura Kɔrɔbɔli Raporo.pdf    

Furakɛcogo ɲuman ni sariya labatoli sɛbɛnw

Furakɛminɛnw dilanni setigiya ka kan ka sinsin sɛbɛnw kan minnu bɛ sen na sisan, minnu bɛ filimu hakɛ tigitigi min dilen don ani a dilanni yɔrɔ kofɔ sanni ka da seere caman ja dɔrɔn kan.

Ka kɛɲɛ ni taayɔrɔ suguya ye ani kiliyanw ka jogoɲumanya siratigɛ la, sannikɛlaw bɛ se ka mago don fɛɛrɛko kunnafoniw ɲini minnu bɛ tali kɛ sɛbɛnfura min bɛ kɛ , sɛgɛsɛgɛlisɛbɛn, fɛnw jirali, furakɛli walima dumuni ni ɲɔgɔn cɛ sariyaw labatoli sɛbɛnw, tolenw-monɔmɛri kunnafoniw, jiginni kunnafoniw, hakɛ sɛgɛsɛgɛli jaabiw ani jogoɲumanya sɛbɛn wɛrɛw minnu bɛnna u kan.

Sariyasunw ni furakɛli sɛbɛnw ka kan ka bɔ dɔrɔn ni sɛbɛnw bɛ sɔrɔ sisan minnu bɛ fura tigitigi di.

Kunnafoni minnu ka kan ka kɛ furakɛli PVC Quote

Walasa ka quotation tigitigi sɔrɔ ani ka misali bɛnnen sɔrɔ, aw bɛ nin kunnafoni ninnu caman di:

• Furakɛcogo, furakisɛ walima fura tata hakɛ wɛrɛ

• A wajibiyalen don PVC janya

• Slit bonya ni a bonya muɲuni wajibiyalen

• Kulɛri jɛlen, fin walima kulɛri wajibiyalen

• Blister cavity ja ani a dilanni juguya

• Blister masin dilannikɛla ani a modɛli

• Sistɛmu min bɛ wuli walima min bɛ kɛ ni dilan fla ye

• Sisan foroko funteni ni layini teliya

• Core kɔnɔna diameter

• Maximum roll kɛnɛma cɛmancɛ

• Rollo girinya hakɛ maksimali

• Lidding foil ani heat-seal lacquer ɲɛfɔli

• Barrière niveau wajibiyalen

• Furakɛcogo walima sariyasɛbɛnw wajibiyalenw

• Sugu min bɛ taa yɔrɔ la

• Kɔrɔbɔli hakɛ ani san kɔnɔ a tacogo

       Furakɛcogo PVC Filimu sɔngɔ sɔrɔ    

Packing ani Delivery

Misaliw foroko: Nin ɲɛ in bɛ misali filimuw jira minnu bonya ye A4 ye, minnu bɛ pake PP bɔrɔw walima kɛsu kɔnɔ.

Film Roll Packing: Sisan kunnafoniw bɛ kilo 30 ɲɔgɔn jira roll kelen walima roll girinya la min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, min lakananen don ni PE film walima kraft papier ye.

Core: Sisan packing specification bɛ 76mm kɔnɔna core diameter jira. Aw bɛ core specification wajibiyalenw dafa ni blister-machine unwind system ye.

Palɛti palɛti : Sisan kunnafoniw bɛ kilo 500–2000 ɲɔgɔn jira plywood palɛti kelen na ka kɛɲɛ ni rollo labɛncogo ye ani a tacogo wajibiyalenw ye.

Minɛnw doni : Ɲɛ min bɛ yen, o bɛ tɔni 20 ɲɔgɔn jira minɛn kelen kɔnɔ. Doni laban hakɛ bɛ bɔ rollo hakɛw la, palɛtiw cogoya la ani minɛn girinya danw na.

Lasecogo: EXW, FOB, CNF ani DDU ye sugandiliw ye minnu bɛ sɛbɛn sisan.

Reference Lead Time: Nin ɲɛ in bɛ tile 7–15 ɲɔgɔn jira komandiw la minnu bɛ sɔrɔ fɛn dilanni hakɛ fɔlen kɔnɔ, ka kɛɲɛ ni fɛnw ɲɛfɔcogo ye, u kulɛri, u hakɛ ani u dilanni waatibolodacogo.

HSQY Dugukolo kan ɲɛjiraliw

HSQY bɛ a sen don diɲɛ plastiki ni pakew jirali la walasa ka furaw foroko caman tigɛlikɛlaw, plastiki feerelaw ani izini B2B kiliyan wɛrɛw kunbɛn.

FAQ Furakɛcogo kan PVC Blister Film

Furakɛcogo grade rigid PVC filimu ye mun ye?

O ye filimu gɛlɛn ye min bɛ funteni dilan, a bɛ kɛ i n’a fɔ kɔnɔnatumuw dilanni web furakɛli kurukuruw foroko kɔnɔ. PVC bɛ sumaya, ka dilan, ka fa ni furakisɛw walima furakisɛw ye ka sɔrɔ ka datugu ni datugulan ye min bɛ bɛn a ma.

HSQY bɛ furakɛli PVC filimu janya jumɛnw di?

Sisan HSQY-210616 furaw lisɛli bɛ furakɛli PVC janya hakɛ jira min bɛ se milimɛtɛrɛ 0,12 fo milimɛtɛrɛ 0,30 ma. Jateminɛ tigitigi ni muɲuli ka kan ka dafa sani aw ka komandi kɛ.

Mun na ɲɛ kɔrɔ in ye 0,07mm fo 6mm jira?

O yɔrɔ in ye PVC sɛbɛnfura min bɛ kɛ seko gɛlɛnba ye min jiralen bɛ tabali fɔlɔ la min bɛ kɛ ni fɛn bɛɛ ye. Furakɛcogo ɲɛfɔli min bɛ nin fura in ɲɛ sanfɛ sisan, o ye milimɛtɛrɛ 0,12 fo milimɛtɛrɛ 0,30 ye, wa a ka kan ka kɛ furakɛli kurukuru ɲininkaliw kama.

Yala PVC gansan bɛnnen don furakɛlifɛn bɛɛ ma wa?

Ayi PVC gansan bɛ kurukuruw lakanani sariyalen di nka a bɛ se ka kɛ a tɛ se ka kɛ furaw la minnu bɛ ji walima oksizɛni sɔrɔ kosɛbɛ. Fura in foroko kɔnɔfɛnw ka kan ka sugandi ni fura sabatili kunnafoniw ye ani a marali waati wajibiyalenw.

Danfara jumɛn bɛ PVC ni PVC / PVDC blister filimu cɛ?

Plain PVC bɛ basigi thermoformable ni standard barrier performance di. PVC / PVDC bɛ PVDC barikalan dɔ fara a kan walasa ka ji ni oksizɛni kɛlɛ kosɛbɛ furakɛlifɛnw na minnu ka gɛlɛn kosɛbɛ.

Danfara jumɛn bɛ PVC / PVDC ni PVC /PE/ PVDC cɛ ?

PVC / PVDC ye a ka c’a la, barikalan min datugulen don walima min bɛ kɛ fila ye. PVC /PE/ PVDC kɔnɔ, PE cɛmancɛ-la-yɔrɔ wɛrɛ bɛ yen ani a ye fɛn caman foroko-minɛn danfaralen ye. Jatebɔ bɛnnen ka kan ka sugandi ka kɛɲɛ ni foroko ni barika ɲininiw ye.

Tuma jumɛn na PVC /PCTFE walima Aclar-type blister film ka kan ka jateminɛ?

Lamini kɛlenw bɛ se ka jateminɛ ni furakɛli sabatili sɛgɛsɛgɛliw y’a jira ko fɛn gansanw PVC walima fɛn kɔrɔlenw PVDC tɛ lakana bɛrɛ di.

Yala furakɛli PVC filimu bɛ se ka kɛ ni kulɛri ye wa?

Awɔ. HSQY ka fɛn dilannenw lisɛli min bɛ sen na sisan, o ye jɛlen, fin, bilen, jɛman ani jɛman ye, ni kulɛri wɛrɛw ye minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, ka kɛɲɛ ni u dilanni, u hakɛ ani u sɔnni ye.

Yala kulɛri PVC bɛ se ka yeelen furaw lakana wa?

Kulɛri dɔrɔn man kan ka jate yeelen lakanani dalilu ye. Yɔrɔ minnu na UV walima yeelen yelen lakanani ka kan ka kɛ yɔrɔ minnu na, fura dilanni ni a tali kɛcogo tigitigi ka kan ka sɛgɛsɛgɛ ka kɛɲɛ ni fura sabatili wajibiyalenw ye.

Yala HSQY bɛ se ka rollo bonya kɛ ka kɛɲɛ ni a yɛrɛ sago ye wa?

Awɔ. Rollo bonya bɛ se ka ladilan ka kɛɲɛ ni blister masin ni baarakɛminɛnw ye. Aw bɛ slit bonya ni muɲuli wajibiyalen di ni aw bɛ quotation ɲini.

Core diameter jumɛn bɛ sɔrɔ?

Sisan pakew kunnafoni fɔlɔ bɛ 76mm kɔnɔna na. Aw bɛ blister machine ka lafiya wajibiyalen tigitigi dafa sani aw ka komandi kɛ.

Yala nin PVC filimu in bɛ se ka baara kɛ furakɛli kurukuruw kan wa?

Furakɛcogo PVC hakɛ min bɛ bɛn o ma, o bɛ se ka baara kɛ ni kurukuruninw ye minnu bɛ funteni dilan, layini tiɲɛni kɔfɛ. Masina suguya, sofa dilanni, foroko funteni, kɔnɔna juguya, layini teliya ani ɛntɛrinɛti tension bɛɛ bɛ nɔ bila baarakɛcogo la.

Yala furakɛli PVC bɛ se ka siri ka kɛ aluminiyɔmu blister papier ye wa?

Furakɛcogo PVC bɛ kɛ ka caya ni aliminiyɔmu push-through lidding foil ye ni funteni-datugulan ye min bɛ bɛn a ma. Foyi, lakɛri ani sigicogo tigitigi ka kan ka tiɲɛ ni PVC dilen ye.

Nafa jumɛnw ka kan ka kɔlɔsi furakɛli PVC filimu kɔnɔ?

Sannikɛlaw ka kan ka dan sigi a bonya caman ɲɔgɔnna na, nɔ nɛrɛmaw, jeliw, jɛgɛ ɲɛw, sɔgɔsɔgɔninjɛ, bugunw, nɔgɔli, kurukuruni, balili, sanfɛla nafama, dakun tiɲɛni, jogindaw ani kurukuruni cogoya.

Fura sanbagaw ka kan ka sɛbɛn jumɛnw ɲini?

Aw ye sisan fɛɛrɛko, sɛgɛsɛgɛli, jogoɲumanya ani sariyasɛbɛnw ɲini minnu bɛ fɛnw hakɛ tigitigi ni fɛn dilanni yɔrɔ ɲɛfɔ, min wajibiyalen don kiliyan ka jogoɲumanya siratigɛ la ani a taayɔrɔ sugu fɛ.

MOQ ye mun ye?

HSQY ka fɛn dilannenw lisɛli min bɛ sen na sisan, o bɛ MOQ jira min ye kilo 2000 ye. Kulɛri kɛrɛnkɛrɛnnenw, u bonya walima u furakɛcogo bɛ se ka jago hakɛ danfaralenw de wajibiya.

Yala ne bɛ se ka misali ɲini sani a ka kɛ caman na wa?

Baro bɛ se ka kɛ misali jateminɛni kan walasa ka a yecogo, a bonya, a thermoforming, cavity formation, machine bolicogo ani a datugucogo bɛnkan lajɛ sani jago ka sɔn.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ a janya, a bonya, a kulɛri, a kɔnɔna hakɛ, a kurukuruni cɛmancɛ, a blister machine, a ka cavité ja, a tata hakɛ, a datugulan, a taayɔrɔ sugu, sɛbɛn wajibiyalenw ani san o san ɲinini di.

HSQY Plastic Group ko la

HSQY Plastic Group bɛ filimu gɛlɛnw PVC ani furakɛli blister-packaging materials minnu bɛ tali kɛ o la, olu di diɲɛ furakɛli pakew jiginnikɛlaw ma, u feerelaw ma ani izini kiliyanw ma.

HSQY bɛ se ka dɛmɛ don PVC janya, slit bonya, kulɛriw, roll configurations, samples, packing ani export supply ka kɛɲɛ ni poroze ɲɛfɔli dafalen ye.

Furakɛcogo porozɛw kama, aw bɛ kurukuruw masin di, ka kɔnɔna ja, furaw sɛgɛsɛgɛli, barika hakɛ wajibiyalen, sugu laɲinitaw ani san hakɛ walasa porozɛ ka se ka jateminɛ ni bɔgɔdaga-filimu jɛlen ye min bɛnnen don PVC walima barikalan sanfɛ.

       Aw ye HSQY lajɛ furakɛli PVC Filimu kama