Thermoforming Dɔgɔtɔrɔso Grade Pvc Plastiki fèy Pvc Dɔgɔtɔrɔso

Furakɛcogo Grade Rigid PVC Film for Blister Packaging

HSQY bɛ furakɛli suguya PVC filimu gɛlɛn dilan walasa ka furakisɛw, furakisɛw ani furakisɛw, furakisɛw ani fura tata hakɛ sabatilen wɛrɛw pakew kɛ ni kurukuruw ye minnu bɛ kɛ ni funteni ye. Filimu in dilannen don walasa ka a bonya cogo basigilen na, ka a dɔgɔyali kɔlɔsi, ka dingɛw dilan cogo la min bɛ se ka da a kan, ka masin boli ka ɲɛ ani ka bɛn furaw ka kurukuruw datugulan papiye ma.

Sisan fɛn dilannenw lisɛli bɛ 0,12mm–0,30mm filimu gɛlɛn PVC kan, kulɛri jɛlenw, finmanw ani kulɛri jɛlenw walima kulɛriw la minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. Kuru bonya, a kɔnɔna cɛmancɛ, a kurukuru cɛmancɛ, a sanfɛla sɔgɔli, a lakanani UV, a kulɛri ani a pake bɛ se ka kɛ ka kɛɲɛ ni blister masin ye ani a foroko cogoya min dagalen don.

Furakɛcogo PVC Filimu lajɛlen Wideyo

Furakɛcogo PVC Filimu Jaw

Furakɛcogo Grade Rigid PVC Film ye mun ye?

Furakɛcogo gɛlɛn PVC filimu ye calendrier walima extrudé thermoforming web ye min bɛ kɛ ka kɛ fɛn ye min bɛ kɛ push-through blister packs kɔnɔ. Filimu bɛ sumaya, ka kɛ dingɛw ye, ka fa ni furakisɛw walima furakisɛw ye ka sɔrɔ ka a siri ni aliminiyɔmu datugulan ye min bɛ bɛn a ma.

PVC gansan bɛ foroko sɔrɔcogo ɲuman di, kɛnɛya ɲuman ani funteni-sɛnɛcogo dafalen di furakɛlicogo sabatilenw ma walima minnu bɛ ji dɔgɔya kosɛbɛ. Fɛn minnu ka gɛlɛn kosɛbɛ, olu bɛ se ka PVC / PVDC , PVC /PE/ PVDC , PVC /PCTFE walima aliminiyɔmu jɔcogo nɛnɛmanw de wajibiya minnu sugandira sabatili ni barika sɛgɛsɛgɛli fɛ.

Furakɛcogo PVC Filimu ɲɛfɔli

Homopolimɛri ni kopolimɛri PVC Filimu min bɛ kɛ ni kurukuruw ye

Plain PVC vs. Barière haute blister Films

HSQY furakɛli PVC Filimu nafa jɔnjɔnw

Thermoforming ani Blister Masina ɲɛminɛcogo

Blister-forming performance bɛ bɔ PVC grade, gauge, cavity cogoya, sofa dilancogo, forming pressure, line speed ani cooling. Masina kɔrɔbɔli ka kan ka ban sani jagokɛlaw ka sɔnni kɛ.

Furakɛcogo ni furakɛli foroko dilanni baarakɛcogo

Sɛgɛsɛgɛli kɛ HSQY furakɛli PVC filimu hakɛ ye PVC gansanw ni barikalan sanfɛtaw ye.

Aplikasi Jaw

Stérilisation ani furakɛli minɛnw foroko

Fura kuru gansan PVC man kan ka fɔ a yɛrɛma ko a bɛnnen don sterilize ma 190°C la. Furakɛcogo-minɛnw foroko kɔnɔfɛnw bɛ se ka jateminɛ ni etilɛni ɔkisidi, gama, ɛlektrɔni-fiɲɛ walima joli-sira-funu-sɛgɛsɛgɛli ye, nka u bɛnkan bɛ bɔ PVC , APET walima PETG hakɛ tigitigi la, u hakɛ, u sɛrɛkili ani u foroko dilanni.

Sɛbɛn minnu bɛ kɛ jogoɲumanya ni sariya siratigɛ la

Fura sanbagaw ka kan ka filimu hakɛ tigitigi sɔrɔ sanni u ka u jigi da SGS, RoHS walima ISO seereyaw bɛɛ lajɛlen dɔrɔn kan. Sɛbɛn minnu ka kan ka kɛ, olu bɛ bɔ fura tata hakɛ la, sugu la, ɲɔgɔn sɔrɔcogo la ani kiliyanw ka jogoɲumanya siratigɛ la.

Jogoɲumanya kɔlɔsili furakɛli PVC Filimu la

Fɛɛrɛbɔ kunnafoniw ani sɛgɛsɛgɛli rapɔɔriw

Nin dosiye ninnu bɛ mara ka bɔ ɲɛ fɔlɔ la. U tɔgɔw bɛ kunnafonidilan caman jira PVC sɛbɛnfura min bɛ kɛ sanni ka furakɛli blister-film ɲɛfɔli kɛrɛnkɛrɛnnen dɔ jira. Aw bɛ furakɛli suguya sɛbɛnw ɲini sisan walasa ka fura kode tigitigi sɔrɔ sani aw ka se ka furakɛli kɛ.

Jaw minnu bɛ foroko kɔnɔ

Foroko ni a maracogo

Sɛbɛnw (certifications) minnu bɛ sɔrɔ

HSQY bɛ se ka sosiyete, quality-system ani mɔgɔ sabanan ka sɛbɛnw di minnu bɛ se ka baara kɛ ka kɛɲɛ ni fɛn sugandilen ye. Furakɛcogo dɔnniya ka kan ka sinsin sɛbɛnw kan minnu bɛ a hakɛ tigitigi ni a dilanni yɔrɔ ɲɛfɔ, a man kan ka sinsin seere caman ja dɔrɔn kan.

HSQY ye Duniya Ɲɛjiraliw la

Kunnafoni minnu ka kan ka sɔrɔ walasa ka Quotation Tiɲɛnen sɔrɔ

1. Filimu jɔcogo : Aw bɛ PVC , PVC / PVDC , PVC /PE/ PVDC walima sigicogo wajibiyalen wɛrɛ dafa.

2. A bonya ni a muɲuni: Aw bɛ jateminɛ kɛcogo wajibiyalen di ani fɛn caman sɛgɛsɛgɛli min dagalen don.

3. Kuru hakɛw: Aw bɛ sɔgɔli bonya, a kɔnɔna cɛmancɛ, a kɛnɛma cɛmancɛ, a kuru janya walima a girinya di.

4. Kulɛri ni yeelen lakanani: Aw bɛ ɲɛfɔli jɛlen, amber, opaque walima UV-absorption wajibiyalenw fɔ.

5. Blister machine: Aw bɛ masin taamasiyɛn, a modɛli, a foroko suguya, a layini teliya ani a kɔnɔna ja di.

6. Fura tali : Aw bɛ sabatili ni balili wajibiyalenw di ka sɔrɔ aw ma furaw dilanni gundo kunnafoniw fɔ.

7. Sugu min bɛ sariyaw sigi sen kan : Aw bɛ taa jamana minnu na ani furakɛli sɛbɛnw, DMF walima kiliyanw ka sɛbɛnw wajibiyalenw fɔ.

8. Jago kunnafoniw: Aw bɛ kɔrɔbɔli hakɛ, san ɲinini, pakew, taayɔrɔ kurunbonkarila ani fɛnw lase waati di.

Ɲininkali minnu bɛ kɛ tuma caman na

Furakɛcogo grade rigid PVC filimu ye mun ye?

O ye filimu gɛlɛn ye min bɛ funteni dilan, a bɛ kɛ i n’a fɔ dingɛw dilanni web furakɛli kurukuruw kɔnɔ. A bɛ sumaya, ka dilan, ka fa ni furakisɛw walima furakisɛw ye ka sɔrɔ ka datugu ka kɛ datugulan ye min bɛ bɛn a ma.

Yala PVC gansan bɛnnen don fura bɛɛ ma wa?

Ayi, PVC gansan bɛ kɛ ka caya furaw la minnu sabatilen don walima minnu ka ji ka dɔgɔn kosɛbɛ. Fɛn minnu bɛ se ka kɛ, olu bɛ se ka PVDC , PCTFE walima aliminiyɔmu nɛnɛma de wajibiya sabatili sɛgɛsɛgɛli kɔfɛ.

Danfara jumɛn bɛ PVC ni PVC / PVDC blister filimu cɛ?

Plain PVC bɛ basigi thermoformable ni basigilen barika di. PVC / PVDC bɛ PVDC fini dɔ fara a kan min bɛ dɔ fara jisuma ni oksizɛni kɛlɛli kan.

Danfara jumɛn bɛ PVC / PVDC ni PVC /PE/ PVDC cɛ ?

PVC / PVDC ye duplex dacogo ye. PVC /PE/ PVDC ye lamini sabatilen ye min bɛ ni PE cɛmancɛ-yɔrɔ ye min bɛ se ka sɔgɔsɔgɔninjɛ kunbɛnni ni foroko kɛcogo ɲɛ.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

Nin fura in lisɛli bɛ 0,12mm–0,30mm kan. Furakɛcogo minnu ka teli ka kurukuruw jateminɛ, olu ye milimɛtɛrɛ 0,20, milimɛtɛrɛ 0,25 ani milimɛtɛrɛ 0,30 ye, ka kɛɲɛ ni masin ni kɔnɔna wajibiyalenw ye.

Yala HSQY bɛ se ka filimu kulɛri kɛ ka kɛɲɛ ni a yɛrɛ sago ye wa?

Awɔ. Kulɛri jɛlen, amber, blue, green, red, yellow, white opaque ani kulɛri wɛrɛw bɛ se ka yiriwa. Kulɛri ni UV lakanani ka kan ka sɔn ka kɛɲɛ ni fura ka yeelenbɔcogo wajibiyalenw ye.

Yala furakɛli PVC filimu bɛ se ka baara kɛ ni blister machines standards ye wa?

Kalanso minnu bɛ bɛn ɲɔgɔn ma, olu bɛ se ka boli kurukuruw kan minnu bɛ wuli ani minnu bɛ kɛ dilan fla ye. Foroko funteni, layini teliya, tension, cavity geometry ani sigili cogoyaw bɛ tiɲɛni de wajibiya.

Aluminiyɔmu papiye jumɛn bɛ siri PVC blister filimu na?

Aw bɛ furakɛli kɛ ni aliminiyɔmu ye min bɛ se ka wuli ni a ye, min datugulen don ni funteni-sigilan ye min bɛ bɛn PVC ma. Aw bɛ sigilan fanga, a funteni, a tansiyɔn ani a sigili waati dafa.

Yala nin filimu in ye antistatique ye wa?

Standard PVC man kan ka fɔ a yɛrɛma ko antistatique. Aw bɛ surface-resistance range ni a kuntaala wajibiyalen fɔ ni static control mago bɛ a la.

Yala nin PVC filimu in bɛ se ka sterilize muɲu 190°C la wa?

Stérilisation générale 190°C man kan ka fɔ. Stérilisation bɛnkan bɛ bɔ pakew hakɛ tigitigi la ani fɛɛrɛ min sɛgɛsɛgɛra, i n’a fɔ etilɛni ɔkisidi, gama, ɛlektrɔniki fiɲɛ walima plasma.

Yala furakɛli PVC bɛ se ka tiɲɛ walima a bɛ se ka kɛ kɔmpo ye wa?

Ayi, PVC kɔrɔlen tɛ se ka tiɲɛ joona, wa a tɛ bɛn so kɔnɔ kɔmposi ma. Laminiko fɔlenw ka kan ka fɛnw sɔrɔli lakika jira ani sigida nɔgɔko fɛnw.

Yala PVC filimu pake gansan pikirijikɛlanw walima furakɛli minɛnw bɛ se ka kɛ wa?

Furakɛcogo-minɛn sanubɔlanw ni jɛgɛw bɛ furakɛli-minɛnw hakɛ ni u ka tiɲɛniw wajibiya minnu dabɔra u dan na, ka ɲɛsin sterilize, sterili barika, sigilanw dafalen, u tilatilali ani u marali waati ma.

Fura sanbagaw ka kan ka sɛbɛn jumɛnw ɲini?

Aw bɛ furaw ɲɛfɔli ɲini sisan, sɛgɛsɛgɛlisɛbɛn, furakɛlicogo walima sariyasun sɛgɛsɛgɛli minnu bɛ kɛ, fɛn dilanni yɔrɔ sɛbɛnw, fɛn caman Changement-contrôle kunnafoniw ani batch traceability.

Yala ne bɛ se ka masin-kɔrɔbɔli misali ɲini wa?

Misali minnu bɛ sɔrɔ, olu bɛ se ka di walasa ka dilan, ka sigi, ka sɛbɛnni kɛ ani ka sabatili jateminɛ. Aw bɛ jatebɔlan, slit bonya, kɔnɔna, kulɛri, masin ani sample janya wajibiyalen di.

MOQ ye mun ye?

Sisan fɛn dilannenw lisɛli b’a jira ko kilo 1000. Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, jateminɛ kɛrɛnkɛrɛnnenw ani jogoɲumanya wajibiyalen wɛrɛw bɛ se ka nɔ bila MOQ laban na.

Ne bɛ se ka quotation tigitigi sɔrɔ cogo di?

Aw bɛ filimu jɔcogo, a bonya, a sɔgɔlen bonya, a kɔnɔna, a roll diameter, a kulɛri, a masin modɛli, a hakɛ, a hakɛ, a sariyasun sugu, a pakew ani a taayɔrɔ ci.

Mun na i bɛ HSQY sugandi ka kɛ i ka furakɛli PVC filimu dilanbaga ye?

HSQY Plastic Group bɛ filimu gɛlɛnw PVC ni kurukuruw foroko jɔcogo gɛlɛnw di furaw foroko caman tigɛlikɛlaw ma ani fura dilannikɛlaw ma. Sosiyete bɛ dɛmɛ don jateminɛnanw na minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, slit widths, colors, roll configurations, samples ani export packing.

Walasa ka laadilikan sɔrɔ min bɛnnen don fɛɛrɛko siratigɛ la, aw bɛ kurukuruw masin di, ka ɲɛgɛnɛsira jateminɛ, fura tata hakɛ jateminɛcogo, suguya laɲinitaw ani jogoɲumanya wajibiyalenw. O kɔfɛ, HSQY bɛ se ka PVC jɛlen jateminɛ walima ka porozɛ bila ka taa PVC / PVDC walima PVC /PE/ PVDC sigicogo dɔ la min ka bon kosɛbɛ.