PET/PE Lidding Film ka ɲɛsin APET sanubɔlanw ma

PET/PE Sigili filimu ye mun ye?

PET/PE sealing film , a bɛ fɔ fana ko PET/PE lidding film, BOPET/PE tray film walima laminated top-seal film, o ye pake caman ye min bɛ se ka wuli ka bɔ a nɔ na, ​​min bɛ kɛ ni PET walima BOPET kɛnɛma lamini ye ani PE-based inner sealing layer.

PET layɛrɛ bɛ kɛnɛya, sɔgɔli fanga, hakɛ sabatili, gɛlɛya ani yɔrɔ min bɛ se ka sɛbɛn, o di. PE-based layer bɛ funteni-datugu baara di PE bɛnkan ma, modified-polyolefin walima PE-coated tray flange.

Ka kɛɲɛ ni sigilan dilanni ye ani baarakɛminɛn wɛrɛw ye, PET/PE filimuw bɛ se ka labɛn walasa ka u bɔ nɔgɔya la, ka u bɔ cɛmancɛ la, ka u datugu ka u datugu, ka sisi kɛlɛ, ka barika caman kɛ, ka fiɲɛ pake caman sɛmɛntiya, ka u bila nɛnɛ na, ka sɛbɛnni kɛ ka kɛɲɛ ni mɔgɔw sago ye ani ka funteni furakɛcogo sugandilenw kɛ.

HSQY bɛ PET/PE sigilan-filimu rollow di dumuni dilannikɛlaw ma, pakew tigɛbagaw ma, sanubɔlanw dilannikɛlaw ma, u feerelaw ma ani u tɔgɔlafɛnw. Filimu bɛnkan ka kan ka dafa ni sanubɔlan yɛrɛ ye, dumunifɛn, sigilan minɛnw ani a maracogo sani a ka dilan jamaba la.

PET/PE Filimu Layɛrɛ jɔcogo

Layɛrɛ hakɛ tigitigi, nɔrɔlan, sirilan, barikalan ani sisi kɛlɛcogo ka kan ka sugandi ka kɛɲɛ ni sanubɔlan sanfɛla ye, dumunifɛn, a maracogo funteni ani da wulicogo wajibiyalen.

PET/PE Sigili filimu ka fɛn dilannenw hakɛ

HSQY suguya min bɛ sen na sisan, o ye filimuw ye minnu bɛ sanubɔlanw datugu ani PET/PE lamini filimuw minnu ka bon. O fɛn dilannenw kuluw ka kan ka danfara don bawo u hakɛw, u kɛcogo ani u komandi hakɛ fitininw tɛ kelen ye.

Ɲɛfɔli minnu bɛ kɛ ka ɲɛsin fɛnw ma

A laban janya, a bonya, a kurukuru janya, MOQ, a ɲɛminɛ waati ani a baarakɛcogo ka kan ka fɔ fɛɛrɛko ɲɛfɔli sɛbɛn kɔnɔ min dabɔra ani jago quotation kɔnɔ.

Easy-Peel PET/PE Datugulan Film

PET/PE datugulan filimu min bɛ bɔ nɔgɔya la, o dilannen don walasa a ka to a la fasa waati la, a ta waati la ani a maratuma na ka sɔrɔ a bɛ a to a feerela ka a datugu dɔɔni dɔɔni ka bɔ ɲɛgɛnɛsira dɔ la.

Foroko min bɛ ɲɛ sɔrɔ nɔgɔya la, o ka kan ka:

• Peel-initiation force min bɛ kɔrɔsi

• Peel-propagation fanga sabatilen

• Dakun kelen bɔli

• Filimu tigɛcogo walima a tigɛcogo danma

• Tolen danmadɔ bɛ sanubɔlan flansɛ kan

• Foroko lakanani bɛrɛbɛrɛ tilatilali waati

• Aw bɛ da wuli tuma bɛɛ a maralen kɔfɛ friji kɔnɔ

Segin HSQY ka kunnafoniw kan    PET/PE sanubɔlan datugulan filimu min bɛ bɔ nɔgɔya la,    ka ɲɛsin pakew dilanni ma minnu bɛ kɛ ni ɲɛgɛnw ye minnu bɛ kɔlɔsi.

Lock-Seal PET/PE Filimu min bɛ datugu

Lock-seal PET/PE film bɛ jɛɲɔgɔnya barikama dɔ dilan walima min tɛ se ka bɔ kosɛbɛ ni PE sigilan ye min bɛ bɛn.

A bɛnnen don ni bɔgɔbɔgɔli kunbɛnni, fɛn tiɲɛnenw daliluw, bolifɛnw lakanani ani a dabɔli kasaara nafa ka bon ka tɛmɛ musakabɔlaw ka sɔgɔli nɔgɔya kan.

Kɔlɔsili-minɛnw bɛ se ka tigɛ, ka u sɔgɔ walima ka u tigɛ walasa ka se ka fura sɔrɔ. A man kan ka fɔ ko a ɲɛkisɛ ka nɔgɔn fo ni a sirilan jɔcogo dabɔra ani ka a sɛgɛsɛgɛ walasa ka a bɔcogo kɔlɔsi.

Segin HSQY ka kunnafoniw kan    lock-seal PET/PE lidding film    walasa ka sanubɔlanw datugu minnu barika ka bon.

Easy Peel vs. Kɔlɔsili Sigili

PET/PE bɛ se ka filimu sigi sanubɔlan jumɛnw na?

PET/PE tɔgɔ bɛ filimu jɔcogo ɲɛfɔ, a tɛ diɲɛ bɛɛ ka sanubɔlan bɛnkan ɲɛfɔ. Dumuni ɲɛda lamini min sinsinnen bɛ PE kan, o ka kan ka bɛn ni fɛn ye min bɛ sanubɔlan flansɛ kan.

Walasa ka ɲɛfɔli sɔrɔ min sinsinnen bɛ baarakɛcogo kan, aw bɛ HSQY ka sɛbɛnw lajɛ    filimu datugulen PET/PE sanubɔlanw kama.

PET/PE Sigili filimu kɛcogo

Dumuni labɛnnenw minnu bɛ nɛnɛ

PET/PE datugulan filimuw bɛ se ka kɛ pasta, tiga, sogo tobilen, nakɔfɛnw, mɔni, kari ani dumuni nɛnɛma labɛnnenw na minnu bɛ kɛ sanubɔlanw kɔnɔ minnu bɛ bɛn ɲɔgɔn ma.

Sogo kura ni kɔnɔw

PET/PE jɔcogo minnu bɛ barika caman sɔrɔ, minnu bɛ sisi kɛlɛ ani minnu bɛ se ka sɔgɔsɔgɔ, olu bɛ se ka labɛn misisogo, donsokɛ, sagasogo, sogo tigɛlen, sosiso, sogo ani diden na.

Jɛgɛ ni Kɔgɔjilafɛnw

Baara minnu bɛ kɛ, olu ye jɛgɛkɛnɛw ye, jɛgɛkɛnɛw, jɛgɛkɛnɛw ani kɔgɔjilafɛn labɛnnenw minnu bɛ ji kunbɛnni wajibiya, sisi kɛlɛli baara walima MAP lakanani.

Jiridenw, Nakɔfɛnw ani Salatiw

Filimu minnu bɛ jɛya, minnu ɲɛ ka nɔgɔn walima minnu bɛ sisi kɛlɛ, olu bɛ se ka kɛ salatiw, berew, tomati, ɲɛgɛn, nakɔfɛnw ani jiriden tigɛlenw na.

Fɛn minnu bɛ ninakili, olu bɛ se ka kɛ sababu ye ka microperforation walima gazi cili kɔlɔsi sanni ka kɛ filimu ye min datugulen don ni hɛrɛmɛtiki ye, min bɛ barika ka bon.

Nɔnɔ ni Foromazi

PET/PE lidding film bɛ se ka kɛ foromazi tilayɔrɔw ye, nɔnɔmugu dumuniw, nɔnɔmugu dumuniw ani nɔnɔmafɛn wɛrɛw minnu bɛ friji kɔnɔ.

Bakery Fɛnw ni Desserts

PET/PE filimu jɛlenw walima minnu sɛbɛnnen don, olu bɛ se ka kɛ gato, patisri, pudding, mousse, confectionery ani burufefeerelaw ka sanubɔlanw ye.

Aviyɔn ni baarada ka dumuniko

PET/PE filimu minnu bɛ kɛ ka ɲɛsin baarakɛcogo kɛrɛnkɛrɛnnenw ma, olu bɛ se ka jateminɛ awiyɔn dumuniw na, cɛmancɛ dumunikɛyɔrɔw, dɔgɔtɔrɔsow, lakɔlisow ani sigida dumuniko baarakɛyɔrɔw la.

Barrière standard vs EVOH Film Barrière haute

PET/PE film standard bɛ masin lakanani di, jiko nafama ani dumuni ni ɲɔgɔn cɛ yɔrɔ min bɛ se ka datugu ni funteni ye. A man kan ka fɔ a yɛrɛma ko a ye filimu ye min bɛ oksizɛni caman sɔrɔ.

Ni aw b’a fɛ ka dumuniw sɔrɔ minnu bɛ oksizɛni sɔrɔ ani ka fiɲɛ foroko caman sɛmɛntiya, aw bɛ HSQY ka sɛbɛnw lajɛ    EVOH basigilen PET/PE sigili filimu min bɛ barika caman sɔrɔ.

Jagokɛyɔrɔw marali waati ka kan ka tiɲɛ ni dumuni, sanubɔlan, filimu, gazi ɲagaminen, sigilanw ani tilali cogoyaw ye minnu bɛ friji kɔnɔ.

Anti-Fog PET/PE Sigili filimu

Furakɛli min bɛ kɛ ni sisi ye, o bɛ jisuma min bɛ kɛ ka dumuni kɛ, o ka jisigicogo Changer sur le surface sur les aliments.

Sani a ka kɛ jikuru yelenw danfaralenw ye, ji bɛ jɛnsɛn ka kɛ fɛn ye min ka fin ani min bɛ kɛnɛya. Filimu min bɛ sisi kɛlɛ, o tɛ ji bɔ ani a tɛ jisuma bali pewu.

Anti-fog baarakɛcogo bɛ bɔ ninnu na:

• Dumuni fasa funteni

• Fɛn dilannenw ka ji hakɛ

• Nɛnɛ teliya

• A maracogo funteni

• Funteni hakɛ jiginni

• Filimu ɲɛsincogo

• Furakɛcogo min bɛ kɛ ka sisi kɛlɛ

• A marali waati wajibiyalen

Segin HSQY ka kunnafoniw kan    anti-fog PET/PE sealing film    min bɛ kɛ dumuni nɛnɛlenw jiracogo la.

Micro-ondes, Foro ani Congelador ka baarakɛcogo

Yala PET/PE sirili filimu bɛ se ka kɛ mikro la wa?

PET/PE datugulan filimu min bɛ kɛ ka kɛɲɛ ni sariya ye, o man kan ka fɔ a yɛrɛma ko a bɛ se ka bila mikro la. Filimu min bɛ se ka kɛ mikro-onde ye, o ka kan ka sugandi ani ka a sɛmɛntiya ni sanubɔlan yɛrɛ ye, dumuni, fanga hakɛ, funteni waati ani watara bɔli cikanw.

Yala PET/PE filimu bɛ se ka kɛ foro kɔrɔlen kɔnɔ wa?

PET/PE filimu standard tɛ se ka kɛ foronto kɔnɔ a yɛrɛma. Foro kɔnɔ baarakɛcogo kɔrɔw bɛ filimu kɛrɛnkɛrɛnnen dɔ de wajibiya min bɛ funteni caman sɔrɔ, CPET walima aliminiyɔmu sanubɔlan min bɛ bɛn a ma ani tobilikɛcogo dafalen.

Yala PET/PE Film bɛ se ka kɛ ka dumuni sumalenw kɛ wa?

PET/PE filimu sugandilen minnu bɛ se ka kɛ konfirɛzi kɔnɔ, olu bɛ se ka dilan, nka fɛn minnu bɛ se ka bɔ konfirɛzi la, olu minnu bɛ bɔ nɔgɔya la ani minnu bɛ datugu, olu man kan ka fɔ u yɛrɛma ko u tɛ se ka kɛ konfirɛzi kɔnɔ.

Dumuni minnu sumana, olu sɛgɛsɛgɛli ka kan ka funteni dɔgɔyali sɛgɛsɛgɛli kɛ, ka fɛnw sɔgɔli, lamini sirili, sigilan marali, filimu sɔgɔli ani u ɲɛgɛnw kɛcogo jateminɛ u wulilen kɔfɛ.

Tray Sealing Machine Baarakɛcogo ɲuman

PET/PE filimu bɛ se ka wuli ka kɛ rollo ye bololabaarakɛminɛnw kama, minnu bɛ kɛ ni bololabaarakɛlaw ye, minnu bɛ wuli ka wuli ani minnu bɛ kɛ ni otomatiki ye pewu.

Sannikɛlaw ka kan ka ninnu di:

• Masina dilannikɛla ani a modɛli

• Sani moule ani cavity layout

• Filimu dafalen bonya

• Core kɔnɔna diameter

• Maximum roll kɛnɛma cɛmancɛ

• Rollo girinya hakɛ maksimali

• PE sealing side joginda kɔnɔ walima kɛnɛma

• Film unwind ɲɛminɛni

• Siginidenw ka funteni hakɛ

• Daɲɛw sigicogo degun

• Sigi waati

• Fɛn dilanni teliya

• Filimu tigɛcogo

• Sɛbɛnni-sɛbɛnni-sɛbɛnni-sɛgɛsɛgɛli

• MAP walima gazi-bɔli baarakɛcogo

HSQY fana bɛ fɛnw dilan    dumunikɛminɛnw datugulan    minnu bɛ kɛ ka fiɲɛ suman datugu ani fiɲɛ pakew dilanni fɛɛrɛ sugandilenw minnu sɛmɛntiyalen don.

Cogo min na i bɛ se ka sigilan ɲuman sigi sen kan

Sigili finɛtiri ye funteni, degun ani sigi waati hakɛ ye min bɛ sigilan basigilen dɔ dilan k’a sɔrɔ a ma filimu walima sanubɔlan tiɲɛ.

Sɛnɛfɛnw dilanni kɔrɔbɔliw ka kan ka jateminɛ kɛ:

• Sigili daminɛ funteni hakɛ fitinin

• Funteni hakɛ min ka bon sani filimu ka tigɛli ka kɛ

• Degun wajibiyalen don

• Sigi waati nafama fitinin

• Hot-tack fanga

• Aw bɛ sigi fanga nɛnɛ kɔfɛ

• Peel-initiation fanga

• Peel-propagation fanga

• Dakabanɔgɔ kɛcogo kelen-kelen

• Sigili-ka-tɛmɛ-nɔgɔli baarakɛcogo

• Kurukuruw ni kanalw bɔli

• Sanu-flange bεε bεε bε bεn

• Filimu nɔfɛtaama ni a dilanni teliya ye

• Pake ka bɔgɔbɔli ni a pɛrɛnni kunbɛncogo

Ni dɔ farala sigili funteni kan, o tɛ fura ɲuman ye tuma bɛɛ sigilan barikama na. Filimu ɲɛsincogo, sanubɔlan bɛnkan, flansɛ saniya, degun ani sigilan-minɛn flakɛli fana ka kan ka lajɛ.

Dadonni ni ji, tulu ani dumuni nɔgɔli ye

Ji, tulu, mɔni, tulu ani dumunifɛn minnu bɛ sanubɔlan flansɛ kan, olu bɛ se ka sigilan tigɛ ani ka jibɔ siraw dilan.

Nɔgɔ datugulan fura sugandilenw bɛ se ka ji walima tulu danma muɲu, nka filimu si man kan ka bila fasa kunbɛncogo ɲuman ni flansɛ saniya nɔ na.

Nɔgɔ sɛgɛsɛgɛliw ka kan ka kɛ ni dumuni tolen lakikaw ye, sanubɔlan, sigilan masin, layini teliya ani friji labɛncogo.

PET/PE sigicogo gɛlɛya minnu ka teli ka sɔrɔ

PET/PE Lidding Film min sɛbɛnna ka kɛɲɛ ni mɔgɔw sago ye

PET/PE sigicogo filimu bɛ se ka sɛbɛn ni fɛn dilannenw tɔgɔw ye, fɛn dilannenw tɔgɔw, a kɔnɔfɛnw, balocogo kunnafoniw, tobilikɛcogo, a maracogo, barɔdiw ani QR kodew.

A ka c’a la, filimu sɛbɛnnen porozɛw bɛ ninnu wajibiya:

• Seko ni dɔnko dosiye minnu bɛ se ka ladilan

• Filimu dafalen bonya

• Segin-ka-bɔnye janya sɛbɛn

• Kulɛriw hakɛ

• Pantone walima kulɛri jiracogo minnu dabɔra

• Sɛbɛnni ɲɛminɛcogo

• I tɔgɔ sɛbɛnni-taamaʃyɛn jɔyɔrɔ

• Sani orientation dans le moule de sealing

• PE sealing side joginda kɔnɔ walima kɛnɛma

• Dumuni-minɛnw ni nɔrɔli wajibiyalenw

• Micro-onde, congelation walima funteni-furakɛli wajibiyalenw

Dumuni ni ɲɔgɔn cɛ siraw labatoli

Dumuni ni ɲɔgɔn cɛ bɛnnen bɛ bɔ PET resin tigitigi la, PE sigilan, nɔrɔlan, EVOH layɛrɛ, sisi kɛlɛli furakɛli, sɛbɛnnikɛlan, dumuni suguya, magali kuntaala ani baarakɛcogo funteni.

Sannikɛlaw ka kan k’a jira ko:

• Taama jamana walima sugu

• Dumuni suguya

• Dumuni ni ɲɔgɔn cɛ cogoya tilennenw

• Kumaɲɔgɔnya waati

• Fali funteni

• Lamini, nɛnɛ walima nɛnɛ marayɔrɔ

• Micro-onde walima funteni cogoyaw

• Jatebla min sɛbɛnna walima min ma sɛbɛn

• Deklarasiyɔn walima jiginni sɛgɛsɛgɛli minnu wajibiyalen don

• Fɛn dantigɛlenw wajibiyalenw

Dumuni ni ɲɔgɔn cɛ kunnafoniw ni sɛgɛsɛgɛli rapɔɔriw ka kan ka dafa filimu jɔcogo tigitigi n’a laɲini cogoyaw kan. Sɛbɛn min bɛ kɛ ka sigilan kelen, a janya walima a sɛbɛnnikɛlan, o man kan ka kɛ a yɛrɛma fɛn bɛɛ kan min bɛ o kulu kɔnɔ.

Yala PET/PE Sigili filimu bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

PET/PE filimu bɛ polimɛri denbaya fila danfaralenw fara ɲɔgɔn kan, wa a man kan ka fɔ a yɛrɛma ko a ye fɛn kelen ye walima ko a bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn wɛrɛ ye diɲɛ bɛɛ kɔnɔ.

Segin-ka-bɔnye lakika bɛ bɔ ninnu na:

• PET ni PE hakɛ

• EVOH walima baarakɛyɔrɔ wɛrɛw

• Laminasi nɔrɔlen

• Printing inks ani furakɛli min bɛ kɛ ka sisi kɛlɛ

• Sani minɛnw

• Ni dawolo bɛ faran ka bɔ sanubɔlan na

• Dumuni nɔgɔli

• Sigida lajɛ ni fɛnw tila-tilacogo infɔrɔmasiko

• Destination-market design-for-recycling wajibiyalenw

Filimu minnu dilannen don ni PET kelen ye walima minnu bɛ se ka kɛ ni fɛn kelen ye, olu bɛ se ka jateminɛ i n’a fɔ porozɛ danfaralenw. Fɛn o fɛn bɛ se ka segin ka kɛ fɛn wɛrɛ ye, o ka kan ka dɛmɛ ni pake bɛɛ jateminɛ ye.

PET/PE Film Customization Sugandiliw

• PET ni PE layɛrɛ hakɛ ladamulen

• Custom total thickness

• Fura min bɛ bɔ nɔgɔya la, a ɲɛ bɛ kɛ cɛmancɛ la walima a bɛ datugu

• Peel force min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

• EVOH ka barikalanba jɔcogo

• OTR ni WVTR laɲiniw ladamulenw

• Furakɛli min bɛ kɛ ka sisi kɛlɛ

• Sigili-sɔgɔli-sɔgɔsɔgɔninjɛ furakɛcogo

• A jɔcogo min bɛ se ka sɔgɔsɔgɔ

• A bɛ kɛ cogo min na, o ye congeléteur-grade ye

• Micro-onde walima funteni-furakɛli hakɛ sugandilen

• Microperforation (microperforation) ka ɲɛsin sɛnɛfɛn kuraw ma

• Sɛbɛnni kɛcogo ladamulen

• Filimu bonya ni rollo janya min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

• Custom core ani maximum roll diameter

• Custom winding sira

• Sɛbɛnni taamasiyɛn minnu bɛ kɛ ka ɲɛsin otomatiki sanubɔlanw ma

• Kartonw, labeliw ani export pallets ladamulenw

Jogoɲumanya Kɔlɔsili

Sɛgɛsɛgɛli fɛn minnu bɛ tali kɛ o la, olu bɛ se ka kɛ ninnu ye:

• PET ni PE ka fɛnɲɛnamafagalanw sɛgɛsɛgɛli

• Filimu bɛɛ lajɛlen girinya ni a muɲuni

• Layɛrɛ kelen-kelen tilatilali ni a ɲɛfɔra

• Rollo bonya ni a janya

• Core size ani roll kɛnɛma cɛmancɛ

• Winding tension ani roll alignment

• Transparence, haze ani gloss

• Surface sɔgɔsɔgɔninjɛ, jeliw ani nɔgɔ

• Lamination-bond fanga

• Solvant tolen ni a bɛ kɛ

• Sigili-daminɛ funteni

• Hot-tack fanga

• Sigili fanga ni a sɔgɔli fanga

• Dakabanɔgɔ kɛcogo kelen-kelen

• Puncture ni tensile baarakɛcogo

• Anti-fog sɛgɛsɛgɛli ni a mago bɛ a la

• OTR ni WVTR ni u ɲɛfɔra

• Print kulɛri ani sɛbɛnni kɛcogo ɲuman

• Dumuni ni ɲɔgɔn cɛ sɛbɛnw lajɛ

• Foroko ni palɛti lakanani

Kunnafoni minnu ka kan ka kɛ PET/PE Film Quote kama

Walasa ka filimu ladilikan ni quotation tigitigi sɔrɔ, aw bɛ se ka:

• Sani minɛn ani layɛrɛ jɔcogo dafalen

• Fɛn min bɛ sanubɔlan datugulan kan

• Farikolo sanubɔlanw misaliw

• Sani hakɛw ni flansɛ bonya

• Dumuni walima fɛn min bɛ pake kɔnɔ

• Dumuni fasa funteni

• Lamini, nɛnɛ walima nɛnɛ maracogo

• A ka kan ka kɛ ka a ɲɛw bɔ nɔgɔya la, ka a bɔ cɛmancɛ la walima ka a datugu

• Filimu misali min bɛ yen walima laɲini peel fanga

• Anti-fog wajibiyalen don

• Barrière haute walima MAP wajibiyalen don

• OTR ni WVTR wajibiyalen don

• Micro-onde, foro walima congeléteur wajibiyalen don

• Filimu janya wajibiyalen don

• Filimu bonya ni a roll janya

• Core kɔnɔna diameter

• Maximum roll kɛnɛma cɛmancɛ

• PE sigili kɛrɛfɛ winding sira

• Tray sealing machine dilabaga ani a modɛli

• Sisan sigili funteni, tansiyɔn ani sigili waati

• Fɛn dilanni teliya

• Filimu min sɛbɛnna walima min ma sɛbɛn

• Seko ni dɔnko baara ni sɛbɛnni seginni janya

• Dumuni ni ɲɔgɔn cɛ sɛbɛnw wajibiyalenw

• Koman hakɛ ani san o san a tacogo

• Jamana min bɛ taa, kurunbonkarila walima fɛnw lase ladɛrɛsi

Ɲininkali minnu bɛ kɛ tuma caman na PET/PE Sealing Film kan

PET/PE sigili filimu bɛ dilan ni mun ye?

A ka c’a la, a bɛ kɛ ni PET walima BOPET kɛnɛma-yɔrɔ ye min lamininen don ka kɛ PE-based food-contact sealing layer ye.

PET layɛrɛ bɛ mun kɛ?

PET bɛ kɛnɛya, kɛnɛya, sɔgɔli fanga, gɛlɛya, hakɛ sabatili ani yɔrɔ min bɛ se ka sɛbɛn, di.

PE layɛrɛ bɛ mun kɛ?

PE-based layɛrɛ bɛ funteni-sigi-yɔrɔ di wa a bɛ se ka dilan walasa ka ɲɛgɛn nɔgɔya, ka ɲɛgɛnw kɔlɔsi walima ka da tugu.

Yala PET/PE filimu bɛ se ka PET sanubɔlan gansanw datugu wa?

A tɛ kɛ wajibi ye. A ka c’a la, PET/PE filimu standard bɛ PE walima poliyolefini modifié flange bɛnnen de wajibiya. APET gansan bɛ se ka kɛ ni filimu ye min bɛ ɲɛsin PET ma.

Yala PET/PE filimu bɛ se ka PET/PE sanubɔlanw datugu wa?

Ɔwɔ, PET/PE sanubɔlanw ni PE datugulan bɛ bɛn ɲɔgɔn ma, olu ye PET/PE datugulan filimu kɛcogo fɔlɔ ye.

Yala filimu bɛ se ka PET/EVOH/PE sanubɔlanw datugu wa?

A ka ca a la a bɛ bɛn ni kɛnɛma sanubɔlan-sigilan tora PE ye. MAP barika ni sigilan dafalen ka kan ka sɛgɛsɛgɛ hali bi.

Yala PET/PE filimu bɛ se ka PP sanubɔlanw datugu wa?

Standard compatibilité man kan ka jate. A ka c’a la, PP sanubɔlanw mago bɛ PP-baarakɛminɛn na i n’a fɔ CPP-based structure.

Danfara jumɛn bɛ peel nɔgɔman ni lock seal cɛ?

Filimu min bɛ bɔ nɔgɔya la, o dabɔra bololabaara dabɔli kama min bɛ kɔrɔsi. Filimu min bɛ datugu ni dakun ye, o bɛ da tugulen dɔ dilan min barika ka bon walima a fanba tɛ se ka bɔ.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

Sani-datugulan fura sugandilenw bɛ 52–100 μm ɲɔgɔn datugu. Laminifɛn camanba minnu ka bon, olu bɛ se ka 45–350 μm ɲɔgɔn kɛ.

Rollo bonya jumɛnw bɛ sɔrɔ?

Sani-datugulan filimuw bɛ sɔrɔ ka bɔ milimɛtɛrɛ 150–900 ɲɔgɔn na. Laminasiyɔn jenerali filimu sugandilenw bɛ se ka dilan ni u bonya ye fo ka se milimɛtɛrɛ 2600 ɲɔgɔn ma.

Rollo janya min bɛ kɛ ka kɛɲɛ ni sariya ye, o ye mun ye?

Sani-datugulan fɛn sugandilenw bɛ baara kɛ ni sɛbɛnfura ye min janya bɛ se mɛtɛrɛ 500 ma. Janya minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ ka kɛɲɛ ni rollo girinya ni masin dan ye.

Yala PET/PE filimu bɛ a yɛrɛma barika ka bon wa?

Ayi, oksizɛni caman bɛ minnu na, olu bɛ EVOH, PVdC, AlOx, SiOx walima barikalan wɛrɛ min sɛgɛsɛgɛra, o de bɛ u wajibiya.

Yala PET/PE filimu bɛ se ka kɛ ka MAP pakew kɛ wa?

Ɔwɔ, ni filimu bɛnnen min bɛ se ka barika bonya, o farala ɲɔgɔn kan ni barikalanba sanubɔlan ye min bɛ bɛn a ma ani MAP kɛcogo min sɛgɛsɛgɛra.

Yala anti-fog filimu bɛ sɔrɔ wa?

Awɔ. Furakɛli min bɛ kɛ ka sisi kɛlɛ, o bɛ se ka fara dumuni nɛnɛmaw kan, salatiw, sɛnɛfɛnw, sogo, kɔgɔjilafɛnw ani dumuni minnu bɛ kɛ nɛnɛ na.

Yala PET/PE filimu standard bɛ se ka kɛ mikro la wa?

Filimu standard man kan ka kɛ mikro la a yɛrɛma. Mikɔrɔ-onde-grade structure kɛrɛnkɛrɛnnen ani pake sɛgɛsɛgɛli dafalen de ka kan.

Yala PET/PE filimu bɛ se ka kɛ foro kɔnɔ min bɛ kɛ ka caya wa?

PET/PE filimu standard tɛ se ka kɛ foronto kɔnɔ a yɛrɛma. Aw bɛ baara kɛ ni filimu kɛrɛnkɛrɛnnen ye min bɛ se ka kɛ foro kɔnɔ, ni CPET walima aliminiyɔmu sanubɔlan bɛ bɛn a ma.

Yala PET/PE filimu bɛ se ka kɛ dumuni sumalenw na wa?

Fɛn sugandilenw bɛ se ka dilan minnu bɛ se ka kɛ konfirɛzi ye, u kɛlen kɔ ka funteni dɔgɔya sɛgɛsɛgɛli, sigilan marali ani sɔgɔsɔgɔninjɛ kunbɛncogo kɔrɔbɔ.

Mun na filimu tɛ siri sanubɔlan na?

A sababu minnu ka teli ka sɔrɔ, olu ye flansɛ fɛn ye min tɛ bɛn ɲɔgɔn ma, filimu kɔseginlen, funteni dɔgɔyali, degun bɛrɛbɛrɛ, sigili waati surun walima baarakɛminɛnw ma ɲɔgɔn sɔrɔ cogo jugu la.

Mun na filimu min bɛ bɔ nɔgɔya la, o bɛ tigɛ da wulituma na?

Sigili fanga bɛ se ka tɛmɛ filimu fanga kan, filimu bɛ se ka tiɲɛ, jateminɛkɛlan tɛ se ka kɛ walima sanubɔlan bɛ se ka kɛ ni peel tab bɛrɛbɛrɛ tɛ a la.

Yala filimu bɛ se ka datugu ni mɔni, tulu walima ji ye wa?

Nɔgɔ datugulan suguya sugandilenw bɛ se ka dumuni tolen danma muɲu, nka o bɛɛ n’a ta, sanubɔlan ka kan ka saniya ani ka ja ni a bɛ se ka kɛ.

Yala PET/PE filimu bɛ se ka sɛbɛn ka kɛɲɛ ni mɔgɔw sago ye wa?

Awɔ. Logow, jaw, fɛn dilannenw kunnafoniw, barɔdiw, QR codew ani tɔgɔsɛbɛnni taamasiyɛnw bɛ se ka sɛbɛn ka kɛɲɛ ni seko ni dɔnko baara minnu dabɔra.

Yala PET/PE sigilan filimu bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

PET/PE ye polimɛri caman lamina ye, wa a tɛ sɔn diɲɛ bɛɛ kɔnɔ PET walima PE lasegincogo la. Foroko dafalen bɛ sugu kɛrɛnkɛrɛnnen jateminɛ de wajibiya.

Koman hakɛ fitinin ye mun ye?

MOQ min bɛ tali kɛ a la, o bɛ kilo 500 ɲɔgɔn bɔ lamination jenerali filimu sugandilenw na ani kilo 1000 ɲɔgɔn na sarɛti-datugulan filimu sugandilenw na.

A dilanni ɲɛminɛ waati ye mun ye?

Reference lead time bɛ kɛ baarakɛdon 7–15 ɲɔgɔn ye filimu jɔcogo, a bonya, a sɛbɛnni ani a jago sariyaw dafalen kɔfɛ.

Yala ne bɛ se ka misali walima kɔrɔbɔli sɛbɛn ɲini wa?

Baro bɛ se ka kɛ misaliw walima kɔrɔbɔli sɛbɛnw kan ka kɛɲɛ ni fɛnw sɔrɔli ye, filimu bonya, sanubɔlan misali, sigilan suguya ani baarakɛcogo wajibiyalenw.

Aw ye PET/PE Sigili filimu Quote ɲini

Aw bɛ PET/PE sigilan-filimu dilabaga ɲini, sanubɔlan filimu min bɛ bɔ nɔgɔya la, da tugulen datugulan filimu, sisi kɛlɛli filimu walima EVOH pakew dilanni fura min bɛ se ka barika ka bon wa?

Aw bɛ se ka kuma HSQY fɛ walasa ka fɛɛrɛko ladilikanw ɲini, sanubɔlanw bɛnkan sɛgɛsɛgɛli, kɔrɔbɔli sɛbɛnfura, sɛbɛnni kɛcogo ladamulen, sɛbɛnfura ɲɛfɔli, izini sɔngɔ ani diɲɛ kɔnɔ cikan kunnafoniw.

       Quote (Quote) dɔ ɲini