PVC Gris Tablo Feuille

PVC sɛbɛn gris gɛlɛn ye mun ye?

PVC sɛbɛn gris gɛlɛn ye thermoplastique board ye min ka bon kosɛbɛ, a dilannen don ni polyvinyl chlorure resin ye, stabilizers, pigments ani application kɛrɛnkɛrɛnnenw faralen ɲɔgɔn kan. A bɛ fɔ fana ko PVC pankurun gris, izini PVC sɛbɛn, PVC sɛbɛn gɛlɛn walima PVC plastiki panɛri gɛlɛn.

PVC sɛbɛn gɛlɛn jɛmanw bɛ masin fanga nafamaw, ji minta dɔgɔyali, kuran sɔgɔli ani asidi caman, alkaliw ani izini kemikɛlifɛnw kɛlɛli fara ɲɔgɔn kan. U bɛ se ka tigɛ, ka sɔgɔ, ka sira bila, ka masin kɛ, ka solda, ka thermoformed ani ka dilan ka kɛ izini yɔrɔw ye.

HSQY bɛ PVC sɛbɛnw di minnu bɛ kɛ npogotigininw ye ani minnu kɔnɔfɛnw bɛ segin ka kɛ fɛn wɛrɛw ye, minnu bɛ kɛ kemikɛli minɛnw kama, jɔli panɛriw, ja, piblisite, ji saniya porozɛw, masinw yɔrɔw, tankiw kɔnɔna, laboratuwari minɛnw ani kuran baarakɛminɛnw.

Yala PVC Grey Board ni Paper Greyboard ye kelen ye wa?

Ayi, Industri PVC gris board ani papier gris ye fɛn fila ye minnu tɛ kelen ye.

HSQY PVC gris board fɛn minnu bɛ nin kulu in kɔnɔ, olu ye plastiki sɛbɛn gɛlɛnw ye. U tɛ papiye-fibre pankurunw ye minnu datugulen don ni PVC ye.

Gris PVC Sheet Ɲɛfɔliw

Tablo nata bɛ HSQY ka PVC gris gris sɛbɛncogo caman ɲɛfɔ. Nafolo tigitigiw ka kan ka dafa fɛn sugandilenw hakɛ ni u sigicogo la.

Masina, kemikɛli, kuran, tasuma ani funteni baarakɛcogo bɛ se ka ɲɔgɔn ta ka kɛɲɛ ni resin hakɛ ye, a hakɛ min bɛ segin ka kɛ fɛn wɛrɛ ye, a falen hakɛ, a ɲɛkisɛ ani a faralenw. Sannikɛlaw ka kan ka fɛɛrɛko kunnafoniw ni sɛgɛsɛgɛli sɛbɛnw ɲini walasa ka fɛn tigitigi minnu komandi.

PVC Board Gris Rigide ka nafa jɔnjɔnw

Kimikisɛw ka kɛlɛli

PVC sɛbɛnfura jɛman gɛlɛn bɛ se ka asidi caman, alkali, kɔgɔ, dɔlɔ ani jisumafɛnw kɛlɛ. O b’a to a bɛnnen don kemikɛli-minɛnw ma, jidagayɔrɔw, plati-minɛnw ani laboratuwari dilanni.

Furakɛcogo bɛnkan ka kan ka lajɛ ni fɛn yɛrɛ ye, a hakɛ, a funteni, a tansiyɔn ani a bɔli waati. PVC tɛ se ka fɛnɲɛnamafagalan walima furakisɛ bɛɛ kɛlɛ diɲɛ bɛɛ kɔnɔ.

Rigidité haute ani Structure Stability (Sɔrɔcogo sabatili).

O jɔli solide min ka bon kosɛbɛ, o bɛ gɛlɛya caman di ka tɛmɛ PVC filimuw kan minnu bɛ se ka wuli ka bɔ u nɔ na ani PVC fomu pankurunw kan minnu girinya ka nɔgɔn. Fɛnɲɛnɛma minnu sugandira ka ɲɛ, olu bɛ se ka kɛ panɛriw ye minnu bɛ u yɛrɛ dɛmɛ, minɛnw sow, masinw yɔrɔw ani fɛn dilannenw.

Ji minɛcogo dɔgɔya

PVC gɛlɛn tɛ ji minɛ nɔgɔya la, o bɛ sɛbɛnfura dɛmɛ a bonya ka to a la yɔrɔ minnu ka ɲi, yɔrɔ minnu ka ɲi walima minnu kolen don.

Kuranko ɲɛnabɔli

PVC nafa ka bon dielektriki la, wa a bɛ se ka jateminɛ kuran sow kama, pannew insulasiw, terminal-box yɔrɔw ani baara wɛrɛw la minnu tɛ conducteur ye.

Porozɛ minnu ka dielektriki fanga, baarakɛcogo walima kuran hakɛ kofɔlen don, olu ka kan ka baara kɛ ni fɛn hakɛ kɔrɔbɔlen ye.

Yɛrɛfaga kɛcogo

A ka c’a la, PVC gɛlɛnw tasuma kɛcogo ka fisa ni thermoplastique caman ye minnu bɛ kɛ tuma caman na, wa a bɛ se ka jeni dabila tasumabɔlan bɔlen kɔfɛ.

O sɛbɛnfura man kan ka fɔ ko tasuma tɛ se ka don a la. UL 94, ASTM E84, EN 13501 walima tasuma hakɛ wɛrɛw ka kan ka sɛgɛsɛgɛ ni sɛbɛnw ye minnu bɛ a kɛcogo tigitigi, a bonya ani a sɛgɛsɛgɛli kɛcogo kan.

Fabrication Mecanique Nɔgɔya

PVC pankurun gris bɛ se ka baara kɛ ni jirisunw ni plastiki dilanni minɛn kɔrɔlenw ye. A bɛ se ka tigɛ ni sɔgɔli ye, ka CNC sira tigɛ, ka sɔgɔ, ka sɔgɔ, ka ja, ka wuli ani ka siri ni masin ye.

PVC npogotigi ni PVC Gris Recyclé

HSQY bɛ se ka PVC sɛbɛnw di minnu bɛ kɛ npogotigininw ye ani minnu kɔnɔfɛnw bɛ segin ka kɛ fɛn wɛrɛw ye. Kalanso bɛnnen bɛ bɔ poroze ka masinko, yecogo, sigidako ani musakako wajibiyalenw de la.

PVC gris board min bɛ segin ka kɛ fɛn wɛrɛ ye, o ye plastiki ye hali bi. A tɛ dilan ni papiye fiyɛw ye minnu bɛ segin ka kɛ fɛn wɛrɛw ye.

A kɛcogo minnu bɛ kɛ ni PVC Rigide Gris ye

Kimiki tankiw ni Tankiw ka finiw

PVC sɛbɛnfura gris gɛlɛnw bɛ se ka dilan ka kɛ kemikɛli tankiw ye, ka kɛ baarakɛminɛnw ye, ka kɛ plating tankiw ye, ka kɛ fɛnw lajɛyɔrɔw ye ani ka kɛ tankiw kɔnɔna ye minnu tɛ sɔgɔ.

Fɛnɲɛnɛmaw janya, u barika bonya, u sɔgɔli kɛcogo ani u ni kemikaliya bɛnkan ka kan ka jate ka kɛɲɛ ni jidagayɔrɔ hakɛw ye, ji hakɛ, baarakɛcogo funteni ani masinw doni.

Industrial Ducting ani Fume bɔli

PVC pankurun gris bɛ se ka sɔgɔ fiɲɛbɔyɔrɔw la, sisi bɔyɔrɔw la, sɔgɔlanw yɔrɔw ani minɛnw datugulanw na izini sigidaw la minnu bɛ fɛn tiɲɛ.

Laboratowari ka minɛnw

Baara minnu bɛ kɛ, olu ye laboratuwari kabiniw, baarakɛyɔrɔw, jibɔlanw, jisigiyɔrɔw, minɛnw sow ani kemikɛlifɛnw marayɔrɔw ye.

Jiko ni jiko porozɛw

PVC panɛri gɛlɛnw bɛ se ka jateminɛ ji saniyaminɛnw na, bafew, jidagayɔrɔw tilayɔrɔw, minɛnw kɔnɔna ani fɛnw dilanni minnu tɛ degun ye.

Masina yɔrɔw ani Masina yɔrɔw

PVC sɛbɛnfura gris minnu dilannen don ni CNC ye, olu bɛ se ka wuli ka kɛ yɔrɔjanw ye, ka kɛ fɛnw bilayɔrɔw ye, ka kɛ datugulanw ye, ka u dɛmɛ, ka kɛ ɲɛminɛlanw ye, ka kɛ garadiw ye ani ka kɛ masin yɔrɔ wɛrɛw ye minnu dilannen don.

So jɔli ni foroko dilanni

PVC pankurun jɛmanw bɛ se ka kɛ foroko ye min bɛ se ka baara kɛ kokura, waati dɔɔnin jɔli panɛriw, lakanani yɔrɔw, kɔkanna panɛriw ani sow jɔcogo minnu tɛ ji bɔ.

Jago doni, dɛmɛnanw ni ɲɔgɔn cɛ, bɔgɔdaga cogoya, kɛnɛyako ani sigida so jɔli wajibiyalenw ka kan ka jateminɛ sani u ka sigi.

Piblisite, Signage ani Graving

O yɔrɔ jɛman nɔgɔlen bɛ se ka bila sira kan, ka ja, ka penti walima ka sɛbɛn ka kɛ izini taamasiyɛnw ye, taamasiyɛnw, minɛnw taamasiyɛnw, jiralanw ani fɛn dilanni misaliw.

Kuranko ɲɛnabɔli yɔrɔw

PVC gɛlɛn gris bɛ se ka kɛ kuran sow ye, switchboard yɔrɔw, batiri-yɔrɔ pannew ani insulating barriers, yɔrɔ minnu na grade sugandilen bɛ kuran sɛgɛsɛgɛli wajibiyalenw dafa.

PVC gris sɛbɛnfura ɲuman sugandicogo

Nin janya ladilikan ninnu ye fɛn bɛɛ lajɛlen ye. Ɛntɛrinɛti jatebɔw ka kan ka jateminɛ kɛ panɛri hakɛw la, dɛmɛnanw ni ɲɔgɔn cɛ, baarakɛcogo funteni, kemikɛlifɛnw tali, ji tansiyɔn, fiɲɛ doni ani lakanafɛnw wajibiyalenw.

Gris PVC Sheet Fabrication Fɛɛrɛw

Saw Tigɛ

Sɔgɔlan sɛrɛkiliw, panɛli sɔgɔlanw ani tabali sɔgɔlanw bɛ se ka kɛ ni nɛgɛw ye minnu bɛnnen don plastiki sɛbɛn gɛlɛnw ma. Tablo ka kan ka dɛmɛ walasa ka dɔ bɔ a yɛrɛyɛrɛli ni a dakunw sɔgɔli la.

CNC sirako ni Milling

CNC minɛnw bɛ se ka ladamu profilw, grooves, recesses, holes, slots, channels ani precision-machined parts dilan.

Tigɛbaga jateminɛcogo, balo teliya ani sɔgɔli teliya ka kan ka ladilan walasa ka funteni kojugu, ka wuli walima ka a dakun gɛlɛnw bali.

Drilling (Boli) kɛli

Baara bɛ se ka kɛ ni drills standards ye ni sɛbɛnfura jɔlen don ka ɲɛ. Yɔrɔ bɛnnen ka kan ka kɛ sirilanw lamini na walasa ka a to funteni ka se ka bonya.

Hot Bending ani Thermoforming (sɔgɔsɔgɔninjɛ) min bɛ kɛ ni funteni ye

PVC sɛbɛn gɛlɛn bɛ se ka sumaya ka kɛ kɛrɛw ye, kanw, datugulanw ani cogoya wɛrɛw. Funteni ka kan ka kɛ kelen ye ani ka a kɔlɔsi ka ɲɛ walasa a kana kɛ ka ɲɛ, ka a jeni walima ka kɔnɔna degun.

Plastiki Soudure (Soudure) min bɛ Kɛ ni plastiki ye

Fiɲɛ sumalen solda ni extrusion solda bɛ se ka PVC panneau gɛlɛnw fara ɲɔgɔn kan tankiw, kanal, sanubɔlanw ani minɛn dilannenw kama.

Welding bere, sheet formulation ani welding parameters ka kan ka bɛn ɲɔgɔn ma. Structural ani leak-critical welds ka kan ka kɛ fabricateurs degedenw fɛ.

Bonding (Bonding) min bɛ kɛ ni nɛgɛ ye

PVC solvent simanw ni izini nɛgɛw minnu bɛ bɛn ɲɔgɔn ma, olu bɛ se ka kɛ jogindaw sugandilenw na. Yɔrɔ saniyacogo, joli dilanni, a kɛnɛyali waati ani a kɛcogo ka kan ka jateminɛ.

Yala PVC sɛbɛnfura gris bɛ se ka sɛbɛn walima ka ja wa?

Awɔ. PVC sɛbɛn gɛlɛn gris bɛ se ka CNC ja, masinw taamasiyɛn, ekran sɛbɛnni ani UV flatbed sɛbɛnni bɛnnen dɛmɛ.

Enki ni finimugu nɔrɔli bɛ bɔ sanfɛla saniya la, yɔrɔ fanga la, enki chimie ani kɛnɛya cogoyaw la. Sɛbɛnni sɛgɛsɛgɛliw ka kan ka ban sani a ka kɛ jamaba kɔnɔ.

Standard offset sɛbɛnni kɛcogo minnu labɛnna papiye kama, olu man kan ka miiri u yɛrɛma ko u bɛ baara kɛ PVC pankurun gɛlɛnw kan.

Gris PVC Rigide vs PVC Mousse Board

PVC gris ni PP, HDPE ani CPVC sɛbɛnw

PVC sɛbɛn gɛlɛnw ka funteni dantigɛli

Vicat softening temperature ni baarakɛcogo basigilen funteni min fɔra, o tɛ kelen ye. Funteni min bɛ se ka baara kɛ tiɲɛ na, o bɛ bɔ doni, sɛbɛnfura janya, a bɔli waati, kemikɛli sigida ani hakɛ sabatili wajibiyalen na.

PVC gɛlɛn jɔnjɔn man kan ka sugandi walasa ka baara kɛ ni funteni caman ye tuma bɛɛ ni fɛɛrɛko jateminɛ ma kɛ. CPVC, PP, PVDF walima ɛntɛrinɛti plastiki wɛrɛ bɛ se ka bɛn kosɛbɛ ni a kɛli bɛ kɛ ni ji funtenimaw ye walima ni baarakɛcogo funteni wulilen don.

Yala PVC sɛbɛnw bɛ se ka kɛ kɛnɛma wa?

UV-stabilized grey PVC grades bɛ se ka jateminɛ kɛnɛma panɛriw, taamasiyɛnw, minɛnw sow ani jɔli baarakɛcogo la.

Kɛnɛyako baara kuntaalajan bɛ bɔ UV sabatilifɛnw na, ɲɛgɛnw, funteni sɛgɛsɛgɛli, a sigicogo, a jiracogo ani waati cogoya. So kɔnɔ kalasi minnu bɛ kɛ ka kɛɲɛ ni sariya ye, olu man kan ka fɔ u yɛrɛma ko u tɛ se ka waati kunbɛn kudayi.

Custom Grey PVC Sheet Sugandiliw

HSQY bɛ dɛmɛ don PVC sɛbɛn gɛlɛnw porozɛw la minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, ka ɲɛsin fɛn dilannikɛlaw ma, kemikɛli-minɛnw dilannikɛlaw, jɔli tɔnw, feerekɛlaw ani izini baarakɛlaw ma.

• Ladamu sɛbɛnfura janya

• Ladamu janya ni a bonya

• Panɛri kɛrɛnkɛrɛnnenw tigɛlenw ka kɛɲɛ ni u bonya ye

• Gris jɛman, gris dibiman walima kulɛri ladamulen

• PVC npogotiginin walima min kɔnɔfɛnw bɛ segin ka kɛ fɛn wɛrɛw ye

• Ladamuni density ani formulation

• UV-stabilisé grades (kalanso minnu bɛ sabati ni UV ye

• Tasuma-fagalan-kalan minnu bɛ kɛ ka ɲɛsin baarakɛcogo kɛrɛnkɛrɛnnenw ma

• Anti-static walima kuran grades ka kɛɲɛ ni fɛn ɲɛfɔlenw ye

• CNC tigɛcogo ni siraw tigɛcogo

• Dingɛw sɔgɔlenw ani yɔrɔ minnu dilannen don ni masin ye

• Graving ani profiles ladamulenw

• Filimu min bɛ mɔgɔ tanga

• Custom pallet ani export pakew

Jogoɲumanya kɔlɔsili ka ɲɛsin Industrial Grey PVC Sheets ma

Fɛnɲɛnɛma sabatili nafa ka bon masinw dilanni, solda, kemikɛli dilanni ani jɔli lajɛ la.

Sɛgɛsɛgɛli fɛn minnu bɛ tali kɛ o la, olu bɛ se ka kɛ ninnu ye:

• Fɛnw dilanni ani u kɔnɔkow dafalenw dantigɛli

• Sɛbɛn janya ni a bonya

• A bonya ni a bonya muɲuni

• Density ani sheet girinya

• Flatness ani warpage (kɛrɛnkɛrɛnnenya la).

• Kulɛriw ka ɲɔgɔndɛmɛ

• Sanfɛla sɔgɔsɔgɔninjɛ, dingɛw ani nɔgɔw

• Edge cogoya ani tigɛcogo ɲuman

• Tensile ni impact baarakɛcogo ni a ɲɛfɔra

• Vicat softening temperature ni a ɲɛfɔra

• Kemisɛnniw ka se ka poroze kɛrɛnkɛrɛnnenw ka kunnafonidilanw kɛlɛ

• Welding ni machining baarakɛcogo

• Palɛti fanga ani kurunbokari lakanani

Sɛbɛnni ni sariya labatoli

Sɛbɛnni wajibiyalenw bɛ danfara ka kɛɲɛ ni PVC dilanni, a kɛcogo ani a taayɔrɔ jamana ye.

Sannikɛlaw ka kan k’a fɔ n’u b’a ɲini:

• Tekniki kunnafonidilan

• Fɛnw lakanani kunnafoniw

• RoHS ka fɔta

• Sɛbɛn minnu bɛ tali kɛ REACH la

• Nɛgɛ gɛlɛnw walima fɛn dantigɛlenw sɛgɛsɛgɛli

• Tasuma sɛgɛsɛgɛli rapɔɔri

• Masinaw ka nafolo rapɔɔri

• Kunnafoni minnu bɛ sɔrɔ kemikaliw kɛlɛli la

• Batch sɛgɛsɛgɛli rapɔɔri

Sɛbɛnw ni sɛgɛsɛgɛli rapɔɔriw ka kan ka dafa ka ɲɛsin fɛn dilannen hakɛ tigitigi ma sanni u ka miiri ko u bɛ tali kɛ PVC gris pankurun bɛɛ la.

Foroko ni Dugukolo kan fɛnw cicogo

A ka c’a la, PVC sɛbɛnw bɛ kɛ ɲɔgɔn kan, ka u lakana ni papiye kraft ye walima ni filimu ye min bɛ u siri ani ka u siri jamana kɔkan palɛtiw kan.

Foroko suguya wɛrɛw bɛ se ka kɛ ninnu ye:

• Filimu min bɛ mɔgɔ tanga a fan kelen walima a fan fila bɛɛ la

• Kraft-paper (sɛbɛn) sirili

• Nkɔni ni dakun lakananifɛnw

• Nɛgɛ walima plastiki palɛti sirilanw

• Fumigation-free export pallets (fɛnw bɔli palɛtiw).

• Labeliw ni palɛti taamasiyɛnw

• Kunnafoni-cimago-logo pakew

Minɛn doni hakɛ bɛ bɔ sɛbɛnfura janya la, a bonya la, a girinya la, a palɛti janya la ani a doni girinya hakɛ min bɛ se ka kɛ.

Mun na i bɛ HSQY sugandi ka kɛ i ka PVC sɛbɛnfura gris dilannikɛla ye?

• Dilanbagaw ka dilan tilennen : Izini dɛmɛni ka ɲɛsin izini dilannikɛlaw ma, feerekɛlaw ani sannikɛlaw caman ma.

• A janya ka bon: Sɛbɛn minnu bɛ daminɛ milimɛtɛrɛ 1 ɲɔgɔn na ka se milimɛtɛrɛ 40 ma, olu bɛ sɔrɔ.

• Sɛbɛn hakɛ caman: Hakɛ minnu bɛ kɛ ka kɛɲɛ ni sariya ye ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka di.

• Npogotigininw ni kalasi minnu bɛ segin ka kɛ fɛn wɛrɛw ye : Fɛnɲɛnɛmaw jɔcogo danfaralenw bɛ se ka jateminɛ ka kɛɲɛ ni baarakɛcogo ni musaka wajibiyalenw ye.

• Ka kɛɲɛ ni mɔgɔw sago ye: Tigɛ, sɔgɔli, siraw dilanni ani ja dilanni baara bɛ se ka kɛ.

• Industriw ka baarakɛcogo dɛmɛni : Fɛn minnu bɛ se ka sugandi kemikɛli, jɔli, piblisite ani masin porozɛw kama.

• Misaliw jateminɛni : Misaliw bɛ se ka labɛn walasa ka masinw kɛ, ka u sɔgɔ, ka u kɛ ni kemikɛli ye ani ka u yecogo sɛgɛsɛgɛ.

• Forobaciyɛn minnu bɛ taa jamana wɛrɛw la: Palletising ani international shipping dɛmɛ bɛ sɔrɔ.

• PVC fɛnw minnu bɛ tali kɛ ɲɔgɔn na: Kunnafoni minnu bɛ sɔrɔ kiliyanw fɛ, olu fana bɛ se ka HSQY ka fɛnw lajɛ PVC sɛbɛnw ka ca.

Kunnafoni minnu ka kan ka kɛ ka ɲɛsin PVC sɛbɛnfura gris Quote ma

Walasa ka izini ka jatebɔ sɛbɛn tigitigi sɔrɔ, aw bɛ se ka nin kunnafoni ninnu caman di:

• A janya wajibiyalen don

• Sɛbɛn janya ni a bonya

• Hakɛ wajibiyalen walima san o san ɲinini

• Gris jɛman, gris dibiman walima kulɛri ladamulen

• Fɛn min ye npogotiginin ye walima min kɔnɔfɛnw bɛ segin ka kɛ fɛn wɛrɛw ye

• Density walima sheet girinya wajibiyalen

• Fɛn laban min bɛ sɔrɔ ani a kɛcogo

• Furakɛcogo tɔgɔ, a hakɛ ani a baarakɛcogo funteni

• Baara kɛli so kɔnɔ walima kɛnɛma

• Masina jogo wajibiyalenw

• Tasuma walima kuran hakɛ wajibiyalen

• Tigɛ, sɔgɔli, sirako walima jago wajibiyalenw

• Protective-film wajibiyalen don

• Kɔrɔbɔli rapɔɔriw walima fɔlisenw wajibiyalenw

• Palɛti ni pakew dilanni wajibiyalenw

• Destination port walima delivery ladɛrɛsi

Ɲininkali minnu bɛ kɛ tuma caman na PVC sɛbɛnfura gris kan

PVC pankurun gris bɛ dilan ni mun ye?

PVC pankurun gris bɛ dilan fɔlɔ ni polivinili kuloridi resin gɛlɛn ye, stabilisateurs, pigments gris ani farali minnu bɛ kɛ kɛrɛnkɛrɛnnenya la. PVC min bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ sɔrɔ kalasi dɔw la, nka u tɛ dilan ni papiye fiyɛw ye minnu bɛ segin ka kɛ fɛn wɛrɛw ye.

Yala PVC sɛbɛnfura gris ka gɛlɛn wa walima a bɛ kɛ fogonfogon ye wa?

Fɛn minnu bɛ nin kulu in kɔnɔ, olu ye PVC sɛbɛnw ye minnu ka gɛlɛn kosɛbɛ. U man kan ka ɲagami ni PVC pankurunw ye minnu girinya ka nɔgɔn walima minnu bɛ kɛ ni fomu ye.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

HSQY bɛ a janya bɛɛ lajɛlen di milimɛtɛrɛ 1–40 ɲɔgɔn ma. Fɛn minnu bɛ kɛ ka caya, olu bɛ milimɛtɛrɛ 3 ni 16 cɛ.

PVC sɛbɛnfura gris hakɛ dantigɛlen ye mun ye?

A bonya minnu bɛ sɔrɔ tuma caman na, olu ye milimɛtɛrɛ 920 × 1820, milimɛtɛrɛ 1000 × 2000, milimɛtɛrɛ 1220 × 2440 ani milimɛtɛrɛ 1300 × 2000 ye. Baro bɛ se ka kɛ fana ka kɛɲɛ ni u ka ladamu hakɛw ye ani pankurunw tigɛlenw ka kɛɲɛ ni u bonya ye.

Yala PVC sɛbɛnfura gris bɛ se ka asidiw ni alkaliw kɛlɛ wa?

PVC gɛlɛn bɛ se ka asidi caman, alkaliw ani kɔgɔji caman kɛlɛ. Bɛnbaliya bɛ bɔ kemikaliya tigitigi la, a hakɛ, a funteni ani a tali waati. Seginkanni ka kan ka kɛ kemikoro-resistance la baarakɛcogo kɔrɔlenw na.

Yala PVC pankurun gris bɛ se ka kɛ ka kemikɛli tankiw dilan wa?

Ɔwɔ, PVC suguya gɛlɛn minnu bɛnnen don, olu bɛ se ka sɔgɔ ka don kemikɛli tankiw kɔnɔ, ka kɛ plating tankiw ye, ka kɛ sanubɔlanw ye ani ka u kɛ finiw ye. A dilanni ka kan ka jateminɛ kɛ kemikoro bɛnkan, ji tansiyɔn, funteni, barika bonya ani welding jogo la.

Yala PVC sɛbɛn gɛlɛnw tɛ tasuma sɔrɔ wa?

Plastiki sɛbɛn si man kan ka fɔ ko tasuma tɛ se ka don a la ni sɛgɛsɛgɛli bɛnnen ma kɛ. A ka c’a la, PVC gɛlɛnw bɛ ni a yɛrɛ fagacogo ye, nka tasuma hakɛ kɛrɛnkɛrɛnnen o kɛrɛnkɛrɛnnen ka kan ka sɛgɛsɛgɛ ka kɛɲɛ ni a hakɛ ni a bonya tigitigi ye.

Yala PVC sɛbɛnfura gris bɛ se ka kɛ kɛnɛma wa?

UV-stabilisé grades bɛ se ka jateminɛ walasa ka baara kɛ ni u ye kɛnɛma. Waati kuntaalajan baarakɛcogo bɛ bɔ furakɛlicogo, waati cogoya, a sigicogo ani a jiracogo la.

Yala PVC pankurun gɛlɛn bɛ se ka kɛ CNC masin na wa?

Awɔ. A bɛ se ka sira, ka sɔgɔ, ka sɔgɔ, ka wuli ani ka ja ni tigɛminɛn bɛnnenw ye ani masinw kɛcogo kɔrɔsilenw.

Yala PVC sɛbɛn gris bɛ se ka tigɛ ni laser ye wa?

A ka c’a la, laser tigɛcogo kɔrɔ man ɲi PVC ma barisa ni a ye fɛn sumaya, o bɛ se ka kɛ sababu ye ka sisi tiɲɛnenw bɔ ani ka laser minɛnw tiɲɛ. A ka c’a la, masinw tigɛcogo walima CNC sira tigɛcogo de ka fisa.

Yala PVC sɛbɛnw bɛ se ka sɔgɔ ɲɔgɔn na wa?

Awɔ. PVC sɛbɛn gɛlɛnw bɛ se ka fara ɲɔgɔn kan ni fiɲɛ sumalen walima extrusion welding ye ni PVC welding bere ye min bɛ bɛn. Minɛn minnu bɛ se ka ji bɔ, olu ka kan ka welda ani ka u sɛgɛsɛgɛ fɛn dilannikɛlaw fɛ minnu bɛ se kosɛbɛ.

Yala PVC pankurun gris bɛ se ka sɛbɛn wa?

Écran printing ani UV flatbed printing min bɛ bɛn o ma, olu bɛ se ka kɛ surface labɛnni ni encre-adhesion testing kɔfɛ. Sɛbɛnni kɛcogo bɛ bɔ tintiri la, a ɲɛda cogoya ani a furakɛcogo la.

Danfara jumɛn bɛ PVC npogotiginin ni PVC gris recyclé cɛ?

A ka c’a la, PVC npogotiginin bɛ kulɛri, a ɲɛda cogoya ani a kɛcogo kɔrɔsi ka ɲɛ. PVC min bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ se ka kɛ fura ye min bɛ musaka caman bɔ, baarakɛcogo minnu na, baarakɛcogo wajibiyalen sɛgɛsɛgɛra yɔrɔ minnu na.

Yala PVC pankurun gris bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

PVC gɛlɛnw bɛ se ka segin ka kɛ ni masin ye yɔrɔ minnu na, yɔrɔ minnu na, fɛnw lajɛyɔrɔ, u farali ani u dilanni yɔrɔ bɛnnenw bɛ yen. Segin-ka-bɔnye lakika bɛ bɔ furakɛlicogo, nɔgɔli ani sigida lasegin-ka-bɔ-fɛnw na.

Yala HSQY bɛ se ka PVC pannew di minnu tigɛra ka kɛɲɛ ni mɔgɔw sago ye wa?

Awɔ. Ladamu sɛbɛnw hakɛw, tigɛcogo rectangulaire, CNC siraw, drilling, slots ani engraved profiles bɛ se ka baro kɛ ka kɛɲɛ ni jaw ni komandi hakɛ ye.

Yala ne bɛ se ka misali ɲini sani ka komandi kɛ wa?

Misaliw bɛ se ka labɛn walasa ka kulɛri, sanfɛla, masinw, solda ani kemikɛli ni ɲɔgɔndɛmɛ jateminɛ. Aw bɛ a janya, a hakɛ ani a kɛcogo wajibiyalen di.

MOQ ye mun ye PVC sɛbɛnfura gris la?

MOQ cogoya bɛ kilo 1000 ɲɔgɔn bɔ. A hakɛ fitinin laban bɛ bɔ a bonya, a bonya, a kulɛri, a kɛcogo ani a dilanni wajibiyalenw na.

A dilanni ɲɛminɛ waati ye mun ye?

Reference production waati bɛ se baarakɛdon 15–18 ma, fɛn ɲɛfɔlenw ni komandi kunnafoniw dafalen kɔfɛ. Furakɛcogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, kulɛriw ani masinw dilanni bɛ se ka waati wɛrɛ wajibiya.

Aw ye PVC sɛbɛn gris Quote ɲini

Aw bɛ PVC sɛbɛnfura gris gɛlɛn dilanbaga ɲini, PVC pankurun dilanbaga min tɛ se ka kemikaliw kɛlɛ walima izini PVC panneau tigɛlen ka kɛɲɛ ni aw yɛrɛ sago ye wa?

Aw bɛ se ka kuma HSQY fɛ walasa ka fɛɛrɛ kunnafoniw ɲini, misaliw, fɛnw ladilikanw, ladamu hakɛw, fɛn dilanni dɛmɛni, izini sɔngɔko ani diɲɛ kɔnɔ fɛnw cicogo kunnafoniw.

       Quote (Quote) dɔ ɲini