Sanubɔlan Sigili Masin

Dumunikɛminɛnw datugulan ye mun ye?

Dumunikɛminɛnw datugulan , n’a bɛ fɔ fana ko sanubɔlan datugulan walima dumunikɛminɛnw datugulan, o ye pakew ye minnu bɛ rollstock lidding film datugu ni funteni ye dumunikɛminɛnw kan minnu dilannen don kaban.

Ka kɛɲɛ ni masin cogoya ye, sanubɔlan sirilan bɛ se ka fiɲɛbɔlan funteni datugucogo sariyalen di, gazi-ji-bɔ-minɛnw, fiɲɛ-bɔ-minɛnw ni gazi-sɔgɔli-minɛnw, fɛnɲɛnamafagalanw datugulan walima fɛnɲɛnamafagalanw farikolo-minɛnw.

HSQY bɛ dumunikɛminɛnw datugulan masinw di bololabaarakɛlaw ma, tabali kan, minnu bɛ kɛ otomatiki tilancɛ la ani minnu bɛ to senna otomatiki la, dumunikɛyɔrɔw, taa ni fɛnw ta jagokɛyɔrɔw, sugubaw, cɛmancɛ dumunikɛyɔrɔw, dumunikɛyɔrɔw, sogo dilannikɛlaw, kɔgɔjilafɛnw pakew, dumuni labɛnnen iziniw ani izini dumunifɛnw foroko siraw ye.

Masina ɲuman ka kan ka sugandi ka kɛɲɛ ni dumunifɛn ye, sanubɔlan hakɛw, sanubɔlan minɛnw, datugulan-filimu jɔcogo, a dilanni bɔli wajibiyalen, a foroko kɛcogo, nafa minnu bɛ sɔrɔ ani a marali waati laɲinitaw.

HSQY Dumuni Sani Dalan Masina Range

HSQY bɛ minɛnw di jagokɛlaw ka pake misɛnninw dilanni kama, dumuni dilanni cɛmancɛ la ani izini sanubɔlanw datuguli min bɛ to senna.

Jatebɔsɛbɛn minnu bɛ sɔrɔ, olu ye jateminɛ nafaw ye minnu bɔra HSQY misali sugandilenw na. Sɛnɛ teliya lakika bɛ bɔ sanubɔlan hakɛw la, mɔbili kɔnɔna hakɛ, baarakɛla doni teliya la, fɛnɲɛnamafagalan waati, gazi-bɔli waati, filimu baloli, fɛn dilannenw janya ani jiginɛ minɛcogo.

Reference Masina ka ɲɛfɔliw

Nin fɛn ɲɛfɔlenw ye HSQY modɛli sugandilenw ka ɲɛfɔli nafaw ye. Voltage, plug, power supply, tray size, mold cavity ani machine configuration ka kan ka dafa sani aw ka komandi kɛ.

Dumunikɛminɛnw datugulan bololabaarakɛminɛnw

Bololabaarakɛminɛn minnu bɛ kɛ ka sanubɔlan datugu, olu bɛ baara kɛ ni bolo ye min bɛ baara kɛ ni levier walima sliding mold ye walasa ka sirilan sumalen digidigi ka kɛɲɛ ni datugulan filimu ni sanubɔlan flange ye.

U bɛnnen don ninnu ma:

• Restoransi minnu bɛ taa ni u ye

• Deli jatedenw

• Dumunikɛyɔrɔ misɛnninw

• Dumunifɛnw feereyɔrɔw

• Dumuni-labɛn daminɛniw

• Fɛn kuraw kɔrɔbɔliw

• Jagokɛyɔrɔ minnu ka dɔgɔn

Bololamasinw bɛ waribon musaka dɔgɔya, u bonya ka dɔgɔ ani u baara ka nɔgɔn. U dantigɛliw ye ka da baarakɛlaw ka teliya kan kosɛbɛ, ka fɛn dilanni kɛcogo dɔgɔya ani ka bololabaara kɛ ka tɛmɛ otomatiki minɛnw kan.

Dumunikɛminɛnw datugulan minnu bɛ kɛ ni u yɛrɛ ye, olu ye semi-automatique ye

A ka c’a la, sanubɔlanw sigilan minnu bɛ kɛ ni otomatiki ye, olu bɛ a ɲini baarakɛla fɛ a ka sanubɔlanw doni ani k’u bɔ k’a sɔrɔ masin bɛ filimu balo a yɛrɛma, ka sigilanw sigicogo kɔlɔsi ani ka filimu tigɛ.

U bɛ cɛmancɛ fura ɲuman di tɔnw ma minnu mago bɛ bɔli la min bɛ kɛ cogo kelen na ka tɛmɛ bololabaarakɛla ka sigilan kan nka u ma mago ɲɛ fɔlɔ in-line sigida la min bɛ to senna.

Nafa minnu bɛ sɔrɔ tuma caman na, olu dɔw ye:

• Filimu indexing otomatiki

• Filimu tigɛcogo saniyalen

• Sigini waati sabatilen ka ca

• Baarakɛlaw ka cɛsiri dɔgɔyara

• Dugukolo-yɔrɔ jɛlen wajibiyalen

• Mɔgɔ caman cili teliya la sanubɔlan hakɛ danfaralenw na

Dumunikɛminɛnw datugulan minnu bɛ kɛ otomatiki la

Sanubɔlanw datugulan otomatikiw bɛ to ka sanubɔlanw ta ka tɛmɛ filimu baloyɔrɔw fɛ, u bilali yɔrɔ la, u datuguyɔrɔw fɛ ani u tigɛyɔrɔw fɛ.

Ka kɛɲɛ ni fɛn dilanni-sira dilanni ye, u bɛ se ka fara ɲɔgɔn kan ni:

• Denestɛriw (denesters) minnu bɛ kɛ otomatiki la

• Dumuni fasa minɛnw

• Kungolo caman peselikɛlanw

• Sosi walima jilama fura tata hakɛ

• Sɛgɛsɛgɛlikɛlaw

• Nɛgɛw detektɛriw

• Convoyeurs (taamakɛlaw) minnu bɛ taa ni fɛnw ye

• Datugulan minnu bɛ kɛ ni snap-on ye

• Labeli kɛcogo masinw

• Inkjet walima laser kodɔnnaw

• Kesi pakew ni palɛtiw dilanni siraw

Otomatiki minɛnw bɛnnen don kosɛbɛ sanubɔlanw ma minnu bɛ kɛ ka kɛɲɛ ni sariya ye, fɛnw doni minnu bɛ se ka segin-ka-bɔ ani u dilanni waati bolodacogo minnu bɛ to senna.

Dumunikɛminɛnw datugucogo

Fiɲɛ funteni Sigili

Fiɲɛ funteni datuguli bɛ sanubɔlan datugu k’a sɔrɔ a ma fiɲɛ bɔ a laɲini na walima ka a bila a nɔ na min bɛ foroko kɔnɔ.

A ka teli ka kɛ dumuniw ye minnu bɛ taa ni u ye, deli dumuniw, dumunifɛnw, burufefɛnw, fɛn kuraw ani fɛn minnu bɛ tilatila waati kunkurunnin kɔnɔ nɛnɛ na walima tile kelen kɔnɔ.

Gazi-Flush Modified Atmosphere Packaging (fiɲɛbɔlan min bɛ wele ko Modified Atmosphere Packaging).

MAP min bɛ gazi bɔ, o bɛ gazi min bɛ se ka dumuni kɛ, o don sanubɔlan kunkolo yɔrɔ la sani a ka datugu. Gazi bɛ fiɲɛ nɔgɔman yɔrɔ dɔ bɔ a nɔ na nka a bɛ se ka kɛ a tɛ oksizɛni tolen hakɛ kelen dilan i n’a fɔ vacuum-and-gazi kɛcogo.

Gazi-bɔli MAP bɛ se ka bɛn dumuni labɛnnen sugandilenw ma, burufefeere dumuniw, sɛnɛfɛnw ani fɛn nɛnɛmaw la, yɔrɔ minnu na, yɔrɔ minnu na, yɔrɔ minnu ka kan ka kɔlɔsi, olu ka kan ka kɛ.

Vacuum-and-Gas MAP ka foroko

MAP min bɛ kɛ ni gazi ye, o bɛ fɔlɔ ka fiɲɛ fanba bɔ so kɔnɔ, o kɔfɛ, a bɛ gazi ɲagaminen kɔlɔsilen don a kɔnɔ sani sanubɔlan ka datugu.

O kɛcogo bɛ se ka oksizɛni tolen kɔlɔsilen di ka tɛmɛ gazi jiginni nɔgɔman kan, nka a bɛ pɔnpe fɛnɲɛnamafagalan, gazi-kɔlɔsili sira, sanubɔlan bɛnnen, filimu min bɛ barika bonya ani sigicogo dafalen de wajibiya.

Vacuum Fari Pakew

Fari foroko minnu bɛ kɛ ni vacuum ye, olu bɛ baara kɛ ni fari filimu sumalen ye min bɛ bɛn dumuni lamini ma kosɛbɛ, wa a bɛ siri sanubɔlan walima kɔfɛyɔrɔ la min bɛ bɛn a ma.

VSP bɛ dɛmɛ don ka fɛn dilannen in lamaga, ka dɔ bɔ pakew hakɛ la fu ani ka feerelikɛyɔrɔ saba jiracogo ɲuman dilan.

A ka ca a la, a bɛ kɛ sogo ɲuman, jɛgɛ, kɔgɔjilafɛnw, foromazi ani farikolojɔli dumuni labɛnnenw na. VSP bɛ filimu kɛrɛnkɛrɛnnenw de wajibiya, sanubɔlan dilanni, funteni ani fɛnɲɛnamafagalanw kɔlɔsili.

Vacuum Tray (Aspirateur Tray) sigili

Vacuum tray sealing bɛ fiɲɛ bɔ sani aw ka datugulan filimu kɛ. A man kan ka furakɛ a yɛrɛma i n’a fɔ a ni fari foroko minnu bɛ kɛ ni vacuum ye, olu bɛ kelen ye.

Foroko laban cogoya, filimu kɛcogo ani dumunifɛn bɛnnenw bɛ bɔ ni masin bɛ baara kɛ ni finimugu fla ye, ni filimu ye min bɛ se ka wuli ka bɔ a la walima ni farikolo filimu ye min dilannen don ni funteni ye.

Heat Seal ni MAP ni VSP

Dumunikɛminɛn minnu bɛ bɛn ɲɔgɔn ma

HSQY sanubɔlan sirilanw bɛ se ka labɛn sanubɔlan fɛnw na minnu tɛ kelen ye, nka sanubɔlan kelen-kelen bɛɛ ka kan ka bɛn ni datugulan filimu ni sigilan baarakɛminɛn ye min bɛ bɛn ɲɔgɔn ma.

HSQY ka fɛnw bɛ tali kɛ ɲɔgɔn na    PP sanubɔlan sirili filimu,    PET sanubɔlan sirili filimu,    PET/PE sanubɔlan sirili filimu    ani    CPET sanubɔlan sirili filimu.

Dumunikɛminɛnw datugulan bɛ baara kɛ cogo min na

1. Sani doni : Sani lankolon bɛ fa ni dumunifɛn ye.

2. Flansɛ sɛgɛsɛgɛli : Dumuni, tulu, mɔni ani ji bɛ bɔ flansɛ dacogo la ni a bɛ se ka kɛ.

3. Sani bilali: Sani min falen don, o bɛ don walima ka bila a kɔnɔ, min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

4. Filimu indexing (Filimu indexing): rollstock lidding film bɛ bila sanubɔlan sanfɛ ni a datugulan ɲuman ɲɛsinnen bɛ duguma.

5. Fiɲɛ furakɛli : Fiɲɛbɔlanw bɛ taa ɲɛ ka taa sigili la, ka sɔrɔ MAP walima vacuum masinw bɛ fiɲɛ bɔ walima ka gazi don a kɔnɔ ka kɛɲɛ ni sɛgɛsɛgɛli bolodalen ye.

6. Funteni sirili : Dasirilan min sumana, o bɛ funteni, tansiyɔn ani sigi waati kɔlɔsilenw kɛ.

7. Filimu tigɛcogo: Masina bɛ filimu tigɛ ka sanubɔlan flansɛ lamini walima ka filimu tolen kɔsegin.

8. Foroko bɔli : Sani min datugulen don, o bɛ bɔ mɔbili kɔnɔ ka taa sɛgɛsɛgɛli la, ka sɛbɛnni kɛ walima ka kɛsu pake kɛ.

Tray Sealer ɲuman sugandicogo

Jatebɔ kɛ Bɔli wajibiyalen na

Aw bɛ sanubɔlan hakɛ jateminɛ min ka kan ka kɛ lɛrɛ kelen kɔnɔ, baarakɛwaati kɔnɔ ani baarakɛdon kɔnɔ. Aw bɛ ɲininiw caya, fɛn dilannenw caman cili, saniya waati, lafiɲɛbɔw ani bonya nataw sen don a la.

Aw bɛ Tray Dimensions (Sankɛminɛnw hakɛw) dafa

Aw bɛ sanubɔlan kɛnɛma janya, a bonya, a juguman, a flansɛ bonya, a nkɔni janya, a yɔrɔ labɛncogo ani a fɛn dilannenw janya hakɛ min bɛ se ka caya, o di.

A’ ye Packaging Process sugandi

Aw bɛ a latigɛ ni foroko in bɛ funteni datugucogo nɔgɔman de wajibiya, gazi kocogo, fɛnɲɛnamafagalan ni gazi MAP, fɛnɲɛnamafagalan datugucogo walima VSP. Masina man kan ka sugandi sani pakew dilanni taabolo wajibiyalen ka ɲɛfɔ.

Sani ani filimu kɔnɔfɛnw dafa

Aw bɛ sanubɔlan ni filimu misaliw di tuma o tuma ni aw bɛ se. Masina mɔli, a datugulan, a funteni ani a tigɛcogo ka kan ka bɛn jagokɛla ka pakew ma.

Aw ye Utilités disponibles lajɛ

Aw bɛ tension, frequency, phase, plug, compressed-air pressure, fiɲɛbɔ hakɛ, gazi sɔrɔyɔrɔ ani a sigiyɔrɔ sɔrɔlenw sɛgɛsɛgɛ.

Baara ni otomatiki wajibiyalenw lajɛ

Bololabaarakɛminɛnw bɛ dɔ bɔ wari bilali fɔlɔ la nka u bɛ baara caman de wajibiya. Otomatiki minɛnw bɛ dɔ bɔ sarɛti minɛcogo la nka u bɛ fɛn dilanni taabolo bɛnnen de wajibiya ani ka waribonba don.

Aw ye Future Tray Formats lajɛ

Sannikɛla minnu bɛ fɛn caman boloda, olu ka kan ka masin dɔ sugandi min ka filimu bonya bɛ se, min bɛ se ka kɛ ni mɔbili ye ani min bɛ se ka fɛn caman Changer teliya la sanubɔlan hakɛ nataw kama.

Moules de Sealing de Sache personnalisées

Moulu bɛ sanubɔlan dɛmɛ a datugu waati la ani ka flansɛ bila sigilan ni tigɛlan jukɔrɔ.

Moule dilancogo ka kan ka jateminɛ kɛ:

• Sani kɛnɛma hakɛw

• Flange bonya ni nkɔni radiyali

• Sani jugumanba

• Dakunw labɛncogo

• Sani ka gɛlɛya

• Fɛn dilannenw janya bɛ sanubɔlan sanfɛ

• Kɔnɔw hakɛ min bɛ sɔrɔ cycle kelen kɔnɔ

• Film tigɛcogo ɲɛfɔli

• Gazi-bɔ-yɔrɔw

• Kanal minnu bɛ kɛ ni vacuum ye

• Sani bɔli ni a bɔli

HSQY bɛ se ka fɛnw dilan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ka da sanubɔlanw misaliw kan, jaw walima hakɛw kan minnu dagalen don.

Modified Atmosphere Packaging wajibiyalenw

MAP sanubɔlan datugulan ye fiɲɛ pakew labɛncogo dafalen sɛmɛntiyalen yɔrɔ kelen dɔrɔn ye.

Jagokɛla MAP porozɛ bɛ se ka kɛ sababu ye ka ninnu wajibiya:

• Gazi tɛ don a la min bɛ se ka kɛ ni barika caman ye

• Filimu min bɛ se ka kɛ ni barika caman ye min bɛ datugu

• Dumuni nafama oksizɛni, gazi ɲuman walima azote sɔrɔli

• Gazi ɲagaminen walima gazi silinda min ɲagaminen don ka kɔn

• Gazi-tansiyɔn ɲɛnabɔlan

• Aw bɛ pɔnpe kɛ ni pɔnpe ye yɔrɔ min na a mago bɛ a la

• Oksizɛni tolenw sɛgɛsɛgɛli

• Leak ni seal-integrity sɛgɛsɛgɛli

• Nɛnɛ-cakɛda cogoyaw sɛgɛsɛgɛlenw

• Dumuni kɛrɛnkɛrɛnnenw marali waati dantigɛli

Kunnafonidila minnu bɛ MAP pakew labɛn, olu bɛ se ka HSQY ka sɛbɛnw lajɛ    MAP sanubɔlanw,    PP sanubɔlanw    ni barikalan datugulanw filimu minnu bɛ bɛn ɲɔgɔn ma.

Vacuum fari pakew dilanni wajibiyalenw

VSP bɛ fɛn caman wajibiya ka tɛmɛ pɔnpe kan min bɛ kɛ ni vacuum ye, o farali ye sanubɔlan sigilan jɔnjɔn kan.

Sistɛmu dafalen ka kan ka kɛ ninnu ye:

• Masina min bɛ se ka VSP kɛ

• Filimu min bɛ kɛ ni vacuum ye min bɛ bɛn a ma

• Sani walima kɔfɛtalan min bɛ ni sigilan ye min bɛ bɛn

• Filimu dilanni juguya bɛrɛbɛrɛ

• Pɔnpe min bɛnnen don ni vacuum ye

• Filimu-sɔgɔsɔgɔninjɛ kɔlɔsili

• Fɛn dilannen-kɛnɛya bɔli

• Puncture ni kolo lakanani jateminɛ

Sannikɛlaw bɛ se ka HSQY ka sɛbɛnw lajɛ    VSP sanubɔlan hakɛ    bɛ se ka kɛ ni fari-pake-sitɛmu dafalen dɔ labɛnna.

Dumunikɛminɛnw datugulanw kɛcogo

Dumuni labɛnnenw ani Dumuni labɛnni

Sanifɛnw sigibagaw bɛ pasta, tigadumuni, sogo dumuniw, nakɔfɛnw, mɔni, kari, dumuni labɛn yɔrɔw ani dumuni labɛnnenw pake kɔnɔ.

Sogo kura ni kɔnɔw

MAP ni VSP masinw bɛ se ka kɛ misisogo, donsokɛ, sagasogo, sogo tigɛlen, sosiso, sogo ani diden na ni u ni sanubɔlanw, filimuw ani gazi sitɛmu bɛnnenw bɛnna.

Jɛgɛ ni Kɔgɔjilafɛnw

Jɛgɛw, jɛgɛw, jɛgɛkɛnɛw ani kɔgɔjilafɛnw tilayɔrɔw bɛ se ka baara kɛ ni MAP walima VSP foroko ye min barika ka bon ka kɛɲɛ ni fɛn dilannen ye, nɛnɛ cakɛda ani jiracogo wajibiyalen.

Jiridenw, Nakɔfɛnw ani Salatiw

Funteni sigicogo sariyalen, filimu minnu bɛ ninakili walima MAP minnu bɛ kɛ ka kɛɲɛ ni a kɛcogo kɛrɛnkɛrɛnnen ye, olu bɛ se ka kɛ salatiw, berew, jiriden tigɛlenw, nakɔfɛnw, ɲɛgɛnw ani deli sɛnɛfɛnw na.

Nɔnɔ ni Foromazi

Foromazi, tulumafɛnw, nɔnɔmugu dumuniw ani nɔnɔmugu nɛnɛmaw bɛ se ka kɛ ni sanubɔlanw ye minnu bɛ bɔ nɔgɔya la, minnu bɛ se ka datugu kokura walima minnu bɛ se ka bali kosɛbɛ.

Bakery ani Desserts (Dɛsɛw)

Gato, patisri, pudding, dessert ani burufefɛnw bɛ se ka kɛ ni fiɲɛ datugulan ye, ka filimu min bɛ sisi kɛlɛ walima ka gazi-bɔn foroko sugandilenw kɛ.

Aviyɔn ni baarada ka dumuniko

CPET ni PP dumunikɛminɛnw bɛ se ka datugu awiyɔn baarakɛlaw ka dumunikɛyɔrɔw kama, dɔgɔtɔrɔsow, lakɔlisow, kasobonw, lakɔlibilayɔrɔw ani cɛmancɛ-dumunikɛyɔrɔw tilatilali kama.

Saniyako labɛnni ni a saniyacogo

Dumunikɛminɛnw datugulan ka kan ka sigi ani ka baara kɛ dumuniko lakanani ni saniya porogaramu sɛbɛnnen dɔ kɔnɔ.

Saniyako jateminɛ nafamaw ye ninnu ye:

• Dumuni-yɔrɔ-yɔrɔ jɔli ni nɛgɛ inox ye

• A sɔrɔli ka nɔgɔn sanubɔlan mɔli la

• Dumuni, mɔni, tulu ani filimu tiɲɛnenw bɔli

• Saniyali kɛli vacuum ni gazi siraw lamini na

• Kuran yɔrɔw lakanani ka bɔ ji la

• Dumuni nafama saniya furaw

• Saniya kɛcogo sɛbɛnnen

• Siginidenw ni tigɛlanw sɛgɛsɛgɛli

Saniyacogo min bɛ se ka kɛ, o bɛ bɔ masin ka kuran lakanani n’a jɔcogo la. Aw kana baara kɛ ni ji ye min bɛ tansiyɔnba kɛ fo ni a modɛli sugandilen dabɔra kɛrɛnkɛrɛnnenya la ani ni a sɔnna ka ko-yɔrɔ saniya.

Ladonni ni a yɔrɔw labɛncogo

Ladonni kunbɛnni bɛ dɛmɛ ka dɔ bɔ sigilanw tiɲɛni na, filimu tiɲɛniw ani jɔli waati labɛnbali.

Ladonni kɛcogo kɔrɔ bɛ se ka kɛ ninnu ye:

• Ka sigilan ni mɔbili saniya

• Tigɛtigɛlanw sɛgɛsɛgɛli

• Sumayafɛnw ni funteni jateminɛnanw lajɛ

• Fiɲɛbɔlanw ni fɛnw sɛgɛsɛgɛli

• Vacuum-pompe tulu ni filɛriw lajɛ

• Gazi siraw ni sariyasunba sɛgɛsɛgɛli

• Film-feed rollers ni sensorw lajɛ

• Masina yɔrɔw minnu dagalen don, olu tuluma

• Kɔrɔtɔko jɔyɔrɔw ni lakana sɛgɛsɛgɛlikɛlanw lajɛ

• Ladonni ni fɛn falen waatiw sɛbɛnni

Sannikɛlaw ka kan ka baro kɛ tasumafagalanw kan, funteni jateminɛnanw, tigɛlanw, sigilanw, sensɛriw, fiɲɛbɔlanw ani pɔnpe fɛnɲɛnamafagalanw ni u bɛ masin komandi.

Installation, Commissioning ani Kalanjɛ ni sɛbɛnni

Sani masin ka ci, HSQY bɛ se ka kiliyan ka sanubɔlanw, filimu, kuran, fiɲɛbɔlan, fiɲɛ minɛta, gazi sɔrɔcogo ani sɛnɛfɛnw bɔli wajibiyalenw lajɛ.

Komisiyɔn bɛ se ka kɛ ninnu ye:

• Masina-niveling ani utilité (nafamafɛnw) ɲɔgɔndan

• Moule (Moule) sigili

• Filimu doni ni a nɔfɛtaama

• Funteni, degun ani sigi waati ladilanni

• Vacuum ni gazi paramɛtiriw sigicogo

• Kɔrɔbɔli sigili ni jagofɛnw ye

• Operatɛriw ka kalan

• Saniya ni ladonni kalan

• Spare-parts seginnkanni

Mun na i bɛ HSQY sugandi ka kɛ i ka dumunikɛminɛnw datugulan ye?

• Minɛn caman hakɛ : Bololabaarakɛminɛnw, tabali kan, semi-automatique ani continuous automatique masinw bɛ sɔrɔ.

• Pakew dilanni taabolo caman : Funteni datugucogo sariyalen, gazi bɔli, MAP ni gazi min bɛ kɛ ni gazi ye ani VSP furakɛlicogo, olu bɛ se ka baro kɛ.

• Sanifɛnw dilanni minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye: Sanifɛnw bɛ se ka dilan ka kɛɲɛ ni sanubɔlanw hakɛ ye, u cogoya ani u kɔnɔna wajibiyalenw.

• Sani ni filimu bɛnkan : HSQY bɛ PP, PET, PET/PE, CPET, MAP ani VSP sanubɔlanw di ni filimuw ye minnu bɛ se ka datugu.

• Fɛn bɔli hakɛ min bɛ se ka sɛgɛsɛgɛ : Minɛnw bɛ jagokɛla misɛnninw datugu ni u dilanni ye min bɛ tɛmɛ sanubɔlan 1000 kan lɛrɛ kɔnɔ.

• Voltage customization: Voltage, frequency ani plug configurations bɛ se ka lajɛ jamana wɛrɛw la minnu bɛ taa yɔrɔ wɛrɛw la.

• Fɛɛrɛ kɔrɔbɔli dɛmɛni: Jagokɛyɔrɔw ni filimuw bɛ se ka lajɛ sani masin laban ka labɛn.

• Foroko dafalen : Sanubɔlanw, filimuw, mɔbiliw ani minɛnw bɛ se ka sɔrɔ feerekɛla kelen fɛ.

• Forobaciyɛn minnu bɛ taa ni u ye jamana wɛrɛw la: Masinaw bɛ se ka pake ka taa jamana wɛrɛw la kɔgɔji walima fiɲɛ fɛ.

• Fɛɛrɛko sɛbɛnw: Baarakɛcogo, ladonni ani masin sigicogo kunnafoniw bɛ se ka di ka kɛɲɛ ni modɛli sugandilen ye.

Kunnafoni minnu ka kan ka kɛ ka ɲɛsin Tray Sealing Machine Quote ma

Walasa ka masin ladilikan tigitigi sɔrɔ ani ka quotation sɔrɔ, aw bɛ nin kunnafoni ninnu caman di:

• Dumunifɛn min bɛ sɔrɔ

• Dumuni fasa funteni

• Sani minɛnw

• Farikolo sanubɔlanw misaliw

• Sani kɛnɛma janya, a bonya ani a juguman

• Sani flange bonya ani nkɔni radius

• Sanubɔyɔrɔw hakɛ

• Dumuni janya hakɛ min ka bon kosɛbɛ sanubɔlan sanfɛ

• Lidding-film jɔcogo

• Filimu bonya, a bonya ani a roll diameter

• Bɔli wajibiyalen lɛrɛ kelen kɔnɔ

• Baarakɛwaatiw baarakɛwaati kelen-kelen bɛɛ la

• Bololabaara, semi-otomatiki walima otomatiki wajibiyalen

• Atmosphère, MAP, vacuum walima VSP baarakɛcogo

• MAP gazi ɲagaminen

• Oksizɛni tolen laɲini

• Laɲiniw ka ɲɛnamaya kɛcogo

• Voltage, frequency ani phase min bɛ sɔrɔ

• Fiɲɛ suguya wajibiyalen don

• Fiɲɛ degunlen tansiyɔn ni seko min bɛ sɔrɔ

• Gazi min bɛ sɔrɔ dumuni na

• Installation (dadon yɔrɔ) min bɛ sɔrɔ

• Sanfɛ ni duguma jɛ-ka-baara wajibiyalen don

• Kan wajibiyalen don kunnafonidilanw ni gafew la

• Pake de rechange wajibiyalenw

• Jamana min bɛ taa, kɔgɔjida la walima lase ladɛrɛsi

Ɲininkali minnu bɛ kɛ tuma caman na dumunikɛminɛnw datugulanw kan

Dumunikɛminɛnw datugulan bɛ mun kɛ?

A bɛ funteni ni degun kɛ walasa ka datugulan filimu siri sanubɔlan dɔ la min dilannen don kaban. Ka kɛɲɛ ni a modɛli ye, a bɛ se fana ka fiɲɛ bɔ, ka gazi ko walima ka fari pakew dilan minnu bɛ kɛ ni vacuum ye.

Danfara jumɛn bɛ sanubɔlan datugulan ni pakew dilanni masin ni vacuum cɛ?

Sani sigilan jɔnjɔn bɛ sanubɔlan gɛlɛn dɔ datugu ni sanfɛla filimu ye. Vacuum pake masin bɛ fiɲɛ bɔ bɔrɔ walima foroko kɔnɔ. Sani sigilan dɔw bɛ ni vacuum, MAP walima VSP baarakɛcogo ye, nka olu bɛ masin cogoya kɛrɛnkɛrɛnnenw de wajibiya.

Danfara jumɛn bɛ gazi bɔli ni gazi vacuum-gazi MAP cɛ?

Gazi bɔli bɛ fiɲɛ bila a nɔ na ni gazi donli ye sanubɔlan kɔnɔ. Vacuum-gas MAP bɛ fiɲɛ fanba bɔ fɔlɔ ka sɔrɔ ka gazi ɲagaminen don a kɔnɔ, a ka c’a la, o bɛ kɛ sababu ye ka oksizɛni tolen kɔlɔsi ka ɲɛ.

Danfara jumɛn bɛ MAP ni VSP cɛ?

MAP bɛ gazi kunkolo yɔrɔ kɔlɔsilen mara dumuni sanfɛ. VSP bɛ fiɲɛ bɔ ka filimu kɛ ka surunya fura lamini na, ka kunkolo yɔrɔ hɔrɔnmaw dɔgɔya ani ka dumuni jɔ.

Yala masin kelen bɛ se ka funteni sigicogo, MAP ani VSP di wa?

Masina kɔrɔlen dɔw bɛ se ka baara caman dɛmɛ baarakɛminɛnw ni u labɛncogo wɛrɛw fɛ. Masina minnu bɛ kɛ ni bolo ye walima minnu bɛ kɛ ni otomatiki basigilen ye, olu man kan ka jate ko olu bɛ baara bɛɛ dɛmɛ.

HSQY masinw bɛ se ka sanubɔlan jumɛnw datugu?

Masina sugandilenw bɛ se ka labɛn PP, APET, PET/PE, CPET, plastiki barikalanba, aliminiyɔmu ani fiyɛri dabɔlenw kama. Bɛnbaliya bɛ bɔ mɔli, filimu ani sigicogo cogoya la.

Yala finimugu kelen bɛ se ka sanubɔlan fɛn bɛɛ datugu wa?

Ayi, filimu ka funteni-datugulan ka kan ka bɛn fɛn walima finimugu ma min bɛ sanubɔlan flansɛ kan. PP, PET, PE-coated PET, CPET ani aluminiyɔmu sanubɔlanw bɛ se ka filimu suguya wɛrɛw de wajibiya.

Bololabaarakɛminɛn bɛ se ka sanubɔlan joli datugu lɛrɛ kelen kɔnɔ?

HSQY bololabaarakɛminɛn sugandilenw bɛ sanubɔlan 480 ɲɔgɔn fɔ lɛrɛ kelen kɔnɔ ni bɔgɔdaga kelen ye ani ka se sanubɔlan 800 ɲɔgɔn ma lɛrɛ kɔnɔ ni bɔgɔdaga fila cogoya sugandilenw ye. Bɔli lakika bɛ bɔ baarakɛla ni sanubɔlan donicogo la.

Otomatiki masin bɛ se ka sanubɔlan joli datugu lɛrɛ kelen kɔnɔ?

HSQY otomatiki masin sugandilenw bɛ kunnafoni bɔlenw di ka bɔ sanubɔlan 1300 fo 2000 ɲɔgɔn na lɛrɛ kelen kɔnɔ. Bɔli lakika bɛ bɔ nɔgɔw kɔnɔna na, sanubɔlan hakɛ ani a foroko kɛcogo la.

Yala MAP sigili bɛ dɔ bɔ masinw bɔli la wa?

A bɛ se ka kɛ. Vacuum ni gas-flush taabolo bɛ waati fara cycle kelen-kelen bɛɛ kan, o la MAP bɔli bɛ se ka dɔgɔya ka tɛmɛ fiɲɛbɔlan funteni-sigi bɔli kan masin kelen kan.

Yala sanubɔlan datugulan bɛ dumuni marali waati janya wa?

Masina bɛ se ka dɛmɛ don ka foroko dɔ dilan min bɛ kɔrɔsi ani min tɛ se ka bɔn, nka a marali waati fana bɛ bɔ dumuni jogo la, saniya, sanubɔlan barikalan, filimu barikalan, gazi ɲagaminen, sigilan dafalen ani a maracogo funteni.

Yala masin bɛ se ka sanubɔlanw datugu minnu kɔnɔ mɔni walima ji bɛ sɔrɔ wa?

Ɔwɔ, nka sanubɔlan ka kan ka to saniyalen na ani ka ja ni a bɛ se ka kɛ. Sosi, tulu ani dumunifɛnw bɛ se ka kɛ sababu ye ka ji bɔli siraw lawuli. Filimu min bɛ se ka nɔgɔ datugu min bɛ bɛn o ma, o fana bɛ se ka kɛ wajibi ye.

Yala masin bɛ se ka sanubɔlanw datugu minnu bɛ se ka bila mikro la wa?

Ɔwɔ, ni PP walima CPET sanubɔlan ni datugulan filimu bɛnnen don mikrowɛn sɛgɛsɛgɛli laɲininen ma. Masina datuguli a yɛrɛ tɛ kɛ sababu ye ka pake kɛ mikro-onde kɔnɔ.

Yala masin bɛ se ka CPET walima aliminiyɔmu sanubɔlanw datugu minnu bɛ se ka kɛ foro kɔnɔ wa?

Masina sugandilenw bɛ se ka CPET ni aliminiyɔmu sanubɔlanw datugu ni mɔbili ye min bɛ bɛn ɲɔgɔn ma ani finimugu min bɛ se ka kɛ foro kɔnɔ. Foroko dafalen ka kan ka tiɲɛ ka kɛɲɛ ni foro funteni ni waati laɲininen ye.

Yala fiɲɛ min bɛ digidigi, o de ka kan wa?

Bololabaarakɛminɛn jɔnjɔnw tɛ se ka kɛ ni fiɲɛ digilen ye. Semi-otomatiki, MAP ani otomatiki modɛli caman bɛ kɛnɛma fiɲɛbɔlan de wajibiya, a ka c’a la, 0,6–0,8 MPa lamini HSQY minɛn sugandilenw na.

Yala pɔnpe min bɛ kɛ ni fɛnɲɛnamafagalan ye, o bɛ a kɔnɔ wa?

Vacuum pɔnpew bɛ don a kɔnɔ walima u ɲɛfɔlen don dɔrɔn vacuum, vacuum-gas walima VSP cogoya sugandilenw kama. Gazi-ko dɔrɔn ani funteni-da-minɛn jɔnjɔnw bɛ se ka kɛ ni pɔnpe ye min bɛ kɛ ni fɛnɲɛnamafagalan ye.

Yala tension ni plug bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye wa?

Voltage, frequency ani plug suganditaw bɛ se ka lajɛ ka kɛɲɛ ni taa jamana ye. Kuranko wajibiyalen ka kan ka dafa sani a ka dilan.

Yala masin kelen bɛ se ka sanubɔlan hakɛ danfaralenw datugu wa?

Ɔwɔ, ni mɔbiliw bɛ sɔrɔ minnu bɛ se ka ɲɔgɔn falen ani ni sanubɔlan hakɛ bɛɛ tora masin ka filimu bonya hakɛ dantɛmɛnen kɔnɔ, nɛgɛdaga yɔrɔ ani sanubɔlan juguman dan.

A bɛ waati joli ta ka fɛn dilannen Changer?

Moulu caman cili waati bɛ bɔ masin ni baarakɛminɛnw dilanni na. Sliding ni baarakɛminɛn tɛ minnu na, olu bɛ se ka dɔ bɔ fɛn caman Changement waati la, nka taabolo tigitigi ka kan ka dafa modeli sugandilen na.

Mun na filimu tɛ siri sanubɔlan na?

A sababu minnu bɛ se ka kɛ, olu ye filimu ye min tɛ bɛn, a sirili fan kɔseginlen, funteni bɛrɛbɛrɛ, a sigi waati surun, degun bɛrɛbɛrɛ, flansɛ nɔgɔlen walima sirilan min tɛ kelen ye.

Mun na a foroko bɛ bɔn a datugulen kɔfɛ?

Fɛnɲɛnama bɛ se ka bɔ dumuni na min bɛ flansɛ kan, filimu kurukuruni, sɔgɔsɔgɔninjɛ, sanubɔlan kari, kanal bɔgɔbɔli, sigicogo jugu walima tigɛ ni datugulan tiɲɛnen.

Sariyasun sigilan bɛ ladonni jumɛn de wajibiya?

Ladonni tuma bɛɛ ye ka bɔgɔdaga ni a datugulan saniya, ka tigɛlanw sɛgɛsɛgɛ, ka funtenifɛnw lajɛ, ka fiɲɛbɔyɔrɔw ladon ani ka pɔnpe pɔnpe ladon yɔrɔ min na a bɛ don a kɔnɔ.

Yala HSQY bɛ se ka sanubɔlanw ni datugulanw di ni masin ye wa?

Awɔ. HSQY bɛ PP, PET, PET/PE, CPET, MAP, VSP ani barikalan caman dilan ɲɔgɔn fɛ ni sigilanw ye minnu bɛ bɛn ɲɔgɔn ma ani masinw dilanni minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Yala ne bɛ se ka n ka sanubɔlanw ci ka taa masin sɛgɛsɛgɛli kɛ wa?

Sani ni filimu misaliw bɛ se ka lajɛ walasa ka nɔgɔw dilanni ni u datugucogo kɔrɔbɔliw kɛ. Dumunifɛn, a bɔli wajibiyalen ani a foroko kɛcogo fana ka kan ka di.

Kunnafoni jumɛnw de ka kan ka sɔrɔ walasa ka quotation sɔrɔ?

Dumunifɛn, sanubɔlan minɛnw, sanubɔlan hakɛw, filimu jɔcogo, a bɔli wajibiyalen, a foroko kɛcogo, a wulicogo, a fiɲɛbɔlan, gazi wajibiyalen ani a taayɔrɔ di.

Dumunikɛminɛnw sigilan masin Quote ɲini

Aw bɛ bololabaarakɛlaw ka sanubɔlan sirilan ɲini, dumunikɛminɛnw datugulan min bɛ kɛ ni otomatiki ye, MAP sanubɔlan datugulan, VSP masin walima dumunifɛnw forokolan otomatiki min bɛ to senna wa?

Aw bɛ se ka kuma HSQY fɛ walasa ka masinw ka ladilikanw ɲini, fɛɛrɛko ɲɛfɔliw, fɛnw dilanni minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, sanubɔlan ni filimuw bɛnkan, kɔrɔbɔli dɛmɛni, izini sɔngɔ ani diɲɛ kɔnɔ fɛnw cicogo kunnafoniw.

       Quote (Quote) dɔ ɲini