1mm Transparent APET shit fɔ Tɛrmofɔmin & Pakɛj
HSQY de mek 1mm transparent APET sheet matirial s fɔ thermoformed pak, blister pak, trey dɛn , klamshɛl, foldin bɔks, pak winda, rital displei, protɛktiv kɔva ɛn kɔstɔmayz plastic kɔmpɔnɛnt dɛn.
APET , ɔ amorphous polyethylene terephthalate, na klia ɛn rigid polyester matirial we dɛn pik fɔ in transparency, gloss, stiffness, toughness ɛn thermoforming pefɔmɛns.
Di prodak we dɛn sho gɛt wan nominal tik we na 1mm. Kastamayz APET sheet matirial ɛn rol spɛsifikɛshɔn dɛn de frɔm lɛk 0.15mm to 3mm, we de ɔnda prodakshɔn kapasiti, ɔda kwantiti ɛn aplikeshɔn rikwaymɛnt.
Standard rol widths de frכm aprכksimatli 110mm to 1280mm. Kɔmɔn flat- sheet matirial dimɛnshɔn dɛn inklud 915 × 1220mm ɛn 1000 × 2000mm, wit kɔstɔmayz wit ɛn kɔt saiz dɛn we de.
Dɛn kin tɔk bɔt klia, layt-blu transparent, kɔlɔ, mat, frɔst, ɛmbos, anti-statik, anti-fɔg, silikon-kɔt ɛn risaykul-kɔntinɛnt gred dɛn akɔdin to di kɔnvɔyt ɛn pak prɔses we dɛn bin want.
Standard APET nɔ fɔ ɔtomɛtik diskrayb as bayɔdigradabl, ovenable, maykrowev-sef, ɔdasay UV resistant, ay barɛri ɔ it-kɔntakt kɔmpliant. Dɛn prɔpati ya nid fɔ gɛt ɛksaktɔ fɔmyulashɔn, kɔmplit pakej strɔkchɔ ɛn aplikebul tɛst dɔkyumentri.
Ɛksplɔrɔ ɔda tin dɛn HSQY PET sheet matirial prodakt fɔ pak, print, tɛmfɔmin ɛn industrial aplikeshɔn.
Rikwest 1mm APET shit Prayz Rikwest APET Sampul dɛn
1mm Transparent APET shit Vidio
Wach di vidio dɔŋ ya fɔ rivyu HSQY transparent PET sheet matirial s ɛn rilat pak aplikeshɔn dɛn.
Transparent APET shit Imej dɛn
![1mm transparent APET glossy sheet matirial fɔ tɛmɔfɔm ɛn pak]( "1mm Transparent APET Sheet")
Transparent APET Shit we de shayn
![Klia 1mm rigid PET sheet matirial fכ blista pak εn vεkyum fכm]( "Clear 1mm PET Sheet")
Klia Rigid PET plastic sheet we dɛn mek
1mm Transparent APET shit Spɛsifikeshɔn dɛn
| Prɔpati |
we De Spɛsifikeshɔn |
| Di Nem fɔ Prodak |
1mm Transparent APET shit yuz. |
| Ɔda Nem dɛn |
1mm Klia PET plastic sheet we dɛn mek , Rigid PET plastic sheet we dɛn mek , APET Tɛmofɔmin Shit ɛn Klia PET Plastik shit |
| Ɛgzampul |
PET plastic sheet we dɛn mek |
| Prodakt Kɔd |
PET -01 |
| Mak |
HSQY we de wok |
| Tin dɛn |
Amorfus polietilen tεrεftalat / APET |
| Tiknɛs we dɛn sho |
1mm / 1000 maykron |
| Kastom Tiknɛs Rɛnj |
Na lɛk 0.15-3mm |
| Rol Width we yu de yuz |
Na lɛk 110-1280mm |
| Standart Shit Sayz dɛn |
915 × 1220mm ɛn 1000 × 2000mm |
| Dimenshɔn dɛn we dɛn kin kɔstɔm |
Kastom rol wit, sheet matirial saiz ɛn kɔt pis dɛn de |
| Fɔmat fɔ di Sapɔt |
Masta rol, slit rol, flat sheet matirial s ɛn kɔt-to-sayz sheet matirial s |
| Rifrɛns Densiti |
aprכksimatli 1.33-1.37g/cm³, sכbjεkt to rεsin εn fכmyuleshכn |
| Aw a luk |
Klia, layt-blu transparent, tint, translucent ɔ opaque |
| Di Opshɔn dɛn fɔ di Surface |
Glossy, mat, frosted, embossed ɛn kɔstɔmayz tɛkstɔr |
| Fim we de protɛkt pɔsin |
Wan-sayd ɔ tu-sayd mask fɔ sɔm sheet matirial spɛsifikɛshɔn dɛn we dɛn dɔn pik |
| Rifrɛns Tɛmofɔmin Rɛnj |
di fכs tray dεm kin bigin arawnd 125-155°C, sכbjεkt to gred εn ikwipmɛnt |
| Ɔt Pɔfɔmɛnshɔn |
Standard APET na fɔ ambient, chilled ɛn sɛlɛkɛt wam-fil aplikeshɔn dɛn, nɔto kɔvɛnshɔnal ɔvin dɛn |
| Di We Aw Dɛn De Print |
UV ɔfset, skrin, UV inkjet ɛn sɛlɛkɛt dijital printin afta dɛn dɔn tɛst am |
| Di we aw dɛn de mek tin dɛn |
Tɛmofɔmin, day kɔt, gilɔtin kɔt, routin, drɔlin, panch, skɔrin, fold ɛn bond |
| Aplikeshɔn dɛn |
Blista pak, trey dɛn , klamshɛl, displei, foldin bɔks, winda ɛn protɛktiv kɔva |
| Speshal Gret dɛn |
Fɔd-kɔntakt, anti-statik, anti-fɔg, silikon-kɔt, UV-stabiliz ɛn risaykul-kɔntinɛnt gred dɛn we dɛn go gri fɔ |
| Minimum Ɔda Kwantiti |
Na lɛk 1000kg so |
| Sampul dɛn |
A4 sheet matirial s, kot sɛmpul ɛn sɛlɛkɛt trayal matirial kin de |
| Di Tɛm dɛn fɔ Pe |
30% dipɔsit ɛn 70% balans bifo dɛn ship am, ɔ di tin dɛn we dɛn gri pan |
| Di Tɛm dɛn fɔ Delivri |
FOB, CIF, EXW ɛn ɔda Incoterms we dɛn gri |
| Tipik Lid Taym |
Aprɔksimatli 7-15 dez afta spɛsifikɛshɔn, sampul, pak ɛn dipɔsit kɔnfɔmeshɔn |
Ɔl di nɔmba pefɔmɛns valyu dɛn fɔ kɔnfɔm yuz di tɛknikal data sheet matirial fɔ di ɛksaktɔ APET rɛsin, risaykul-kɔntinɛnt lɛvɛl, tiknɛs ɛn prodakshɔn batch.
Rikwest 1mm APET shit PrayzRikwest APET Sampul dɛn
Wetin Na 1mm Transparent APET shit ?
1mm transparent APET sheet matirial na rigid amorphous PET matirial wit nominal tiknes we na 1 milimita, we ikwal to 1000 maykron.
di amorphous strכkchכ de alaw di sheet matirial fכ de transparent εn fayn fכ tεmכfכm we i hεt insay wan aprכpriet prכsεsin winda.
We yu kɔmpia am wit tinna pak fim dɛn, wan 1mm sheet matirial de gi big stiffnɛs, bɔdi, impak rɛsistɛns ɛn shep ritɛnshɔn fɔ ebi-duti trey dɛn , pak insɛt, protɛktiv kɔva ɛn displei kɔmpɔnɛnt dɛn.
Faynal pefomans dipכnt pan di PET rεsin, intrinsik viskositi, risaykul kכntεnt, aditiv, εkstrushכn kכndishכn, tiknes tכlerεns, sכfayz tritmεnt εn fכm prכsεs.
Wetin Mek Yu Pik wan 1mm APET shit ?
big stiffness: I de gi mכr strכkchכral bכdi pas tin APET pak film.
Klia prɛzɛntɛnshɔn: I de alaw fɔ mek di prɔdak dɛn we dɛn pak ɔ di displei grafik dɛn kɔntinyu fɔ si.
Tεrmoforming kapabiliti: I kin fכm insay trey dɛn , insεt, kכva εn ditayl pat dεm afta prכsεs validεshכn.
Impact resistance: I de gi yusful tafnɛs fɔ handle, transpɔt ɛn fabricated kɔmpɔnɛnt dɛn.
Printabiliti: Suitabl sɔfays kin sɔpɔt UV, skrin ɛn ɔfset printin.
Fabrikeshɔn opshɔn dɛn: Dɛn kin kɔt, panch, rout, fold, skor ɛn bon.
Packaging visibility: I de gi klia we fɔ si di prɔdak dɛn we de na rital ɛn industrial pak.
Risaykul-kɔntinɛnt pɔtɛnɛshɔn: RPET opshɔn dɛn kin evalyu akɔdin to klia ɛn kɔmplians rikwaymɛnt.
Aplikeshɔn dɛn fɔ 1mm Transparent APET shit
Blista pak: Hevi-duti blista komponent fɔ tul, ilɛktronik, hadwae ɛn kɔshɔma prodak.
Tɛrmofɔm trey dɛn : Klia insɛt, transpɔt trey dɛn ɛn prodak-pɔzishɔn trey dɛn .
Klamshɛl pak: Rigid transparent pak fɔ rital prodak.
Fɔ pak it: Tre ɛn kɔntena dɛn we de yuz gred we dɛn dɔn gri fɔ fɔ kɔntakt it.
Winda dɛn we dɛn kin pak: Transparent winda dɛn fɔ pepabɔd katon ɛn bɔks dɛn we dɛn kin fold.
Ritayl displei: Prodakt holda, POP displei, shelf komponent en klia panɛl.
Protektiv kɔva: Klia kɔva fɔ ikwipmɛnt, ilɛktronik ɛn displei.
Print aplikeshɔn dɛn: Sayn dɛn we dɛn print wit UV, grafik dɛn, kad dɛn ɛn transparent prɔmoshɔnal kɔmpɔnɛnt dɛn.
Steshɔnari prodakt: Rigid kɔva, divayda, tɛmplat ɛn dɔkyumɛnt kɔmpɔnɛnt dɛn.
Aparɛl pak: Shirt insɛt, pak sɔpɔt ɛn transparent kɔva kɔmpɔnɛnt dɛn.
![1mm transparent APET glossy sheet matirial we dɛn kin yuz fɔ pak blista]( "APET Sheet for Blister Packaging")
APET shit fɔ Blista Pakɛj
![Transparent PET glossy sheet matirial we dɛn kin yuz fɔ thermoformed blister ɛn tre aplikeshɔn dɛn]( "Transparent PET Sheet for Thermoforming")
Transparent PET plastic sheet we dɛn mek fɔ Tɛmofɔmin
Diskus Yu APET Aplikeshɔn
Termoforming 1mm transparent APET shit
APET kin prosɛs yuz vaykum fɔm, prɛshɔn fɔm, plɔg-ɛsist fɔm ɛn mach-mɔld fɔm.
di fכs fכm trayal kin bigin na lεk 125-155°C, bכt di kכrekt tεmprachכ de dipכnt pan rεsin gred, sheet matirial tεmprachכ, di kayn hita, di tεm we i de hεt, di rכ rεshכn, di mכld tεmprachכ εn di saykl spid.
Di sheet matirial fɔ ɔt yunifom. Di lokal ɔva ɔt kin mek kristalizashɔn, haz, brit, sɔfays dɛfɛkt ɔ nɔ ivin distribyushɔn na di wɔl.
di prεdrying rikwaymεnt dεm dipכnt pan di rεsin, sheet matirial mכsichכ, stכrej kכndishכn, fכm saykl εn spכlayt instrכkshכn. Di wan dɛn we de bay fɔ avɔyd fɔ tink se ɛvri APET gred kin fɔm we dɛn nɔ drɛy.
| Fɔm Isyu |
Posisibul Kɔz |
Rikɔmɛnd Chɛk |
| Klaud ɔ Wait Ɛria dɛn |
Ɔva ɔt, kristalizayshɔn ɔ strɛs pasmak |
Ridyus di ɔt ɛksplɔshɔn ɛn kɔnfɔm fɔm tɛmpracha distribyushɔn |
| Tiknɛs fɔ di Wɔl we Nɔ Ivin |
Nɔ ivin ɔt, drɔ pasmak ɔ nɔ ɛp di plɔg fayn |
Rivyu hita zoning, mold jɔyometri ɛn plɔg dizayn |
| Wɛb Sag |
Tɛmpratura pasmak ɔ tɛm fɔ ɔt |
Adjɔst hita autput, saykl tɛm ɛn sheet matirial sɔpɔt |
| Krak Krak We Dɛn De Trim |
Lɔw impak trɛnk, kol sheet matirial , po tul ɔ pasmak kristalizashɔn |
Chek resin gred, trim temperechur en bled kondishon |
| Poor Ditiɛl Riprodakshɔn |
Insufishɛnt sheet matirial tɛmpracha, vaykum ɔ prɛshɔn |
Inkris di kɔntrol ɔt ɛn rivyu mold ventin |
Printin, Kɔt ɛn Fabrikeshɔn
Transparent APET sheet matirial s kin kכnvכlt to print, kכt, fold, bכnd εn tεmכfכm prodak.
| Proses |
Tipik Aplikeshɔn |
Rikwayd Validɛshɔn |
| UV Ɔfset Printin we yu de print |
Fɔlding bɔks, kad, panɛl ɛn transparent pak |
Shit fidin, statik, ink adheshon, curing ɛn post-print folding |
| Fɔ Print na Skrin |
Displei, sayn, kɔva ɛn industrial kɔmpɔnɛnt dɛn |
Ink kompitibiliti, drying, abrashon en kemikal resistans |
| UV Inkjet we dɛn de print |
Sayn dɛn, grafik dɛn ɛn prɔdak dɛn we dɛn mek fɔ shɔt tɛm |
Kyuring ɛnaji, sɔfayz tritmɛnt, adheshon ɛn ɔt distɔrshɔn |
| Day Kɔt ɛn Panch |
Blisters, folding boxes, winda ɛn insɛt |
Tul kliarens, edj krak, waytin ɛn dimɛnshɔnal akkuracy |
| Routing ɛn Sawing |
Tik sheet matirial s, displei, panɛl ɛn pat dɛn we dɛn mek |
Tul jɔyometri, fid rit, kol ɛn edj finish |
| Folding ɛn Skɔring |
Transparent katon, kɔva ɛn displei kɔmpɔnɛnt dɛn |
Skɔ dip, fold dairekshɔn, wayt ɛn krak |
| Adhesive Bonding we gɛt fɔ du wit am |
Bɔks, displei ɛn miks-matirial asɛmbli dɛn |
Adhesive klariti, kemikal kompitibiliti ɛn peel trɛnk |
APET , PETG , CPET ɛn BOPET Difrɛns
| Matirial |
Men Karakta |
Tipik Aplikeshɔn dɛn |
| APET |
Transparent, rigid, kɔst-ɛfishin ɛn fayn fɔ standad tɛmɔfɔmin |
Blisters, trey dɛn , klamshɛl, folding bɔks ɛn pak winda |
| PETG |
Glycol-modified polyester wit wan wayda fɔm winda, tafnɛs ɛn impɔtant bonding |
Dip-dro pat, ditayl kɔva, displei ɛn spɛshal pak |
| CPET |
Kristalayz PET we dɛn ɛnjinia fɔ validet ay-tɛmpracha aplikeshɔn dɛn |
Mil we dɛn kin ɔv trey dɛn ɛn it kɔntena dɛn we nɔ kin ɔt |
| BOPET |
Biaxially oriented tin PET film wit ay tɛnsiɛl trɛnk ɛn dimɛnshɔnal stebiliti |
Fleksibul pak, lɛbl, printin, ilɛktrik insuleshɔn ɛn laminat |
Di wan dɛn we de bay fɔ no di rayt PET tayp pas fɔ pik matirial bay we dɛn jɔs yuz di wɔd PET sheet matirial .
Teknikal Pɔfɔmɛnshɔn Rikwaymɛnt dɛn
| Prɔpati |
Wetin Mek I |
Impɔtant Rikɔmɛnd Purchasing Specification |
| Tiknɛs Tolɛreshɔn |
Afɛkt fɔm dip, wɔl distribyushɔn, stiffnɛs ɛn prodak wet |
Nominal 1mm wit gri minim, maksimɔm ɛn mɛzhɔmɛnt we |
| Layt Transmishɔn |
Kɔntrol di we aw pɔsin kin si di prɔdak dɛn we dɛn pak ɔ we dɛn dɔn sho |
Minimum transmishɔn na di tik we dɛn spɛsifa ɛn tɛst we |
| Nɔ klia |
Ditarmin optik klia ɛn klawd apinans |
Maksimal haz akɔdin to wan optik tɛst we dɛn gri pan |
| Kɔlɔ |
Kontrol klia, blu-tint ɔ kɔstɔmayz apinɛns |
Kɔlɔ kɔdinɛt, yɔlɔnɛs indeks ɔ apruv fizik sampul |
| Intrinsik Viskositi we de na di wɔl |
Influεns mεlt trεnk, mεkanikal prכpati εn prכsεsin |
Rɛsin-grɛd ɔ dɔn- sheet matirial IV rikwaymɛnt usay nid de |
| Di Shrinkage we di ɔt de mek |
Afɛkt printin rɛjista, flatnɛs ɛn thermoforming |
Test temperechur, durayshɔn, mashin dairekshɔn ɛn transvas dairekshɔn |
| Impekt Pɔfɔmɛnshɔn |
Kontrol krak krak we dɛn de fɔm, transpɔt ɛn yuz |
Impekt mεtכd, spεshal tiknes, tεmprachכ εn akseptans limit |
| Surface Enaji |
Afɛkt ink, kɔtin ɛn adhesive bonding |
Dyne level, tritmεnt sayd εn tritmεnt-rεtεnshכn pεriכd |
| Kofishin fɔ Frikshɔn |
Afɛkt fidin, denɛst, waynd ɛn ɔtomɛtik kɔnvɔyt |
Statik ɛn dinamik COF akɔdin to di aktual aplikeshɔn |
| Fɔd-Kɔntakt Status |
I nid fɔ pak it dairekt wan |
Rɛgyuleshɔn fɔ di say we dɛn de go, di kayn it we dɛn de it, di tɛmpracha, di tɛm ɛn di kɔndishɔn we dɛn de muf |
Kwaliti-Kɔntrol Tɛst dɛn we Dɛn Rikɔmɛnd
PET resin ɛn matirial-grɛd verifyeshɔn.
Virgin ɛn risaykul-kɔntinɛnt pasɛnt.
Tik ɛn tik tolɛreshɔn.
Rol wit, sheet matirial dimɛnshɔn ɛn dayagɔnal tolɛreshɔn.
Rol lɔng, rol wet, kɔr saiz ɛn winding dairekshɔn.
Winding kwaliti, edj alaynɛshɔn ɛn tɛliskɔping.
Sheet flatness, bow, kɔl ɛn edj kɔndishɔn.
Densiti ɔ spɛshal graviti.
Layt transmishɔn, haz, tint ɛn glos.
Yɔlɔnɛs indeks ɛn batch-to-batch kɔlɔ difrɛns.
Blak spat, jel, bɔbul, layn, skrat ɛn kɔntaminɛshɔn.
Tensile strɛngth, elongashɔn ɛn mɔdyul.
Impekt pefɔmɛns na di tɛmpracha we dɛn nid.
Hɛt shrinkage na di mashin ɛn transvas dairekshɔn.
Tɛrmofɔmin tɛmpracha winda ɛn wɛb sag.
Draw dip ɛn di wɔl-tiknɛs distribyushɔn.
Waitin ɛn kristalizayshɔn afta dɛn dɔn fɔm.
Printin adhesion, curing ɛn abrashɔn rɛsistɛns.
Day kɔt, panch, skɔ ɛn fold pefɔmɛns.
Adhesive bonding ɛn peel trɛnk.
Anti-statik, anti-fɔg ɔ silikon-kɔtin pefɔmɛns usay dɛn nid am.
Fɔd-kɔntakt maykreshɔn tɛst usay i apɔynt.
Inspekshɔn fɔ pak, palet ɛn kɔntena-lod.
Di Tin dɛn we Yu fɔ Du fɔ Kɔntakt fɔ it
di polimכr nem APET nכ de כtomatכk establish fכd-kכntakt kכmplians.
Fɔd-kɔntakt suitabiliti dipen pan di PET rɛsin, risaykul kɔntinyu, katalis rɛsɛdyu, aditiv, kɔlɔrant, anti-blɔk ɛjɛn, silikon tritmɛnt, kɔtin, ink, adeziv ɛn finish pakej strɔkchɔ.
Di wan dɛn we de bay fɔ no di kayn it, di kɔntakt tɛmpracha, di tɛm we dɛn go kɔntakt, di kɔndishɔn we dɛn de kip am, di we aw dɛn de ful-ɔp ɛn di rigyuleshɔn fɔ di say we dɛn de go-maket.
Rilevɛnt dɔkyumentri kin inklud diklareshɔn fɔ kɔmplians, maykreshɔn tɛst rizɔlt, rɛsin ɔtorizeshɔn infɔmeshɔn ɛn risaykul-kɔntinɛnt aprɔval usay i apɔynt.
Tɛmpratura ɛn Hɛt Limiteshɔn
Standard APET na men wan we dɛn kin yuz fɔ ambiɛnt, chill, frɔzɛn ɛn sɛlɛkɛt wam-fil pak pas kɔvɛnshɔnal ɔvin aplikeshɔn.
di glas-transishכn rijyכn fכ standad APET tipikli dכn di tεmprachכ dεm we de aכsכsiayt wit ovenable pak, so di mεtirial kin sכft, disכrt כ lכs dimεnshכnal stεbiliti we i εkspos to pasmak hεt.
Standard APET nɔ fɔ ɔtomɛtiks promot as maykrowev-sef, kɔvɛnshɔnal-ɔvin-sef ɔ fayn fɔ bɔyl-wata aplikeshɔn.
Aplikeshɔn dɛn we nid validet ɔvin rɛsistɛns fɔ nɔmal fɔ ɛvaluet CPET ɔ ɔda ɔt-rɛsistɛns matirial.
Standart ɛn Ay-Baria PET Strukchɔ dɛn
| Strukchɔ |
Praymari Fɔnkshɔn |
Impɔtant Limiteshɔn |
| Mono APET |
Klariti, rigiditi ɛn standad tɛmɔfɔmin |
Nɔto ɔtomɛtik wan ay ɔksijɛn ɔ mɔstɔ barɛri |
| Wan PET/PE |
Ad wan ɔt-sial sɔfays fɔ trey dɛn ɛn pak |
Sil pefɔmɛns dipen pan PE gred ɛn lidding film |
| PET/EVOH/PE |
Impruv ɔksijɛn barɛri ɛn ɔt-sial fɔ it-kɔntakt layt |
Rikways separet fɔm, sial ɛn risaykul ɛvalueshɔn |
| Di kɔt we dɛn kɔt PET |
Anti-fog, anti-statik, silikon, printin ɔ barɛri fɛnshɔn |
Kכt kin afekt adheshon, maygrεshכn, fכm εn risaykul |
Risaykul ɛn Sastaynabiliti
Standard PET na risaykul usay fayn kɔlɛkshɔn, sɔt ɛn risaykul infrastukchɔ de.
Stɛndad APET nɔ fɔ diskrayb as bayɔdegradabl ɔ kɔmpɔstabl pas di ɛksaktɔ matirial dɔn indipɛndɛnt tɛst ɛn sɛtifiket to wan aplikebul standad.
Di risaykulbiliti fɔ wan pakej we dɔn dɔn dipen pan in kɔlɔ, lɛbl, adeziv, ink, kɔtin, barɛri layers, sil ɛn komponent dɛn we dɛn ataya.
RPET kɔntinyu kin inkɔrpɔret akɔdin to klia, kɔlɔ, kɔntaminɛshɔn, mɛkanikal pefɔmɛns ɛn it-kɔntakt rikwaymɛnt.
Di wan dɛn we de bay we nid fɔ gɛt risaykul klem fɔ no di say we dɛn de go fɔ risaykul ɛn evalyu di kɔmplit paket dizayn.
UV, Ɔda ɛn Flammabiliti Rikwaymɛnt
Standard klia APET na men wan fɔ indo pak, printin ɛn displei aplikeshɔn dɛn.
If yu de na do fɔ lɔng tɛm, i kin mek yu yɔlɔ, yu nɔ gɛt glos, yu kin brok ɛn chenj di we aw yu de wok.
Ɔda aplikeshɔn dɛn nid fɔ gɛt aplikeshɔn-spɛsifi k UV-stabilized gred ɛn klia wan difayn wɛda rikwaymɛnt dɛn.
APET kin ajɔst UL 94 HB rizulta insay sɔm fɔmyulashɔn ɛn tik, bɔt dis nɔ fɔ aplay to ɛvri prodak we nɔ gɛt kɔrɛspɔndɛns ripɔt.
Wan matirial-lɛvɛl flammabiliti rizɔlt nɔ de establish di faya klasifikeshɔn fɔ wan kɔmplit pakej, displei, mashin gad ɔ bildin sistɛm.
Kastom APET shit Opshɔn dɛn
Fichu 1mm transparent APET sheet matirial .
Tiknes we dɛn kɔstɔmayz frɔm lɛk 0.15mm to 3mm.
Rol wit frɔm lɛk 110mm to 1280mm.
915 × 1220mm ɛn 1000 × 2000mm standad sheet matirial s.
Kastomiz sheet matirial dimɛnshɔn ɛn kɔt pis.
Masta rol, slit rol ɛn flat sheet matirial s.
Klir, blu-tinted, transparent kala ɛn opaque prodakt dɛn.
Glossy, mat, frosted ɛn ɛmbos sɔfays dɛn.
Wan-sayd ɔ tu-sayd protɛktiv fim.
Virgin APET ɛn kɔstɔmayz RPET -kɔntinɛnt strɔkchɔ dɛn.
Tɛmofɔmin, printin, fold-bɔks ɛn displei gred dɛn.
Fɔd-kɔntakt gred dɛn we gɛt fɔ du wit dɔkyumɛnt.
Anti-statik, anti-fɔg ɛn silikon-kɔt gred dɛn.
Customized labels, katon, palet ɛn shiping mak dɛn.
Infɔmeshɔn we dɛn nid fɔ wan APET shit Kɔt
Rikwayd tik ɛn tik tolɛreshɔn.
Rol wit ɔ sheet matirial dimɛnshɔn dɛn.
Rikwayd rol lɔng, rol wet ɛn kɔr dayamita.
Klin, blu-tint, kɔlɔ ɔ opaque apinans.
Glos, mat, frɔst ɔ ɛmbos sɔfays.
Protektiv-film rikwaymɛnt.
Virgin APET ɔ rikwayd RPET pasɛnt.
Thermoforming dip, mold dimɛnshɔn ɛn ikwipmɛnt.
Print, kɔt, fold, bon ɔ fabrication prɔses.
Rikwayd klia, haz ɛn kɔlɔ limit.
Fɔd-kɔntakt kɔndishɔn ɛn di dɛstineshɔn makit.
Rikwayd OTR, WVTR, siling ɔ barɛri pefɔmɛns.
Anti-statik, anti-fɔg, silikon ɔ UV rikwaymɛnt dɛn.
Teknik ɛn kɔmplians dɔkyumɛnt dɛn we dɛn nid.
Initial kwantiti ɛn ɛstimat ɛni ia dimand.
Packing, destination port ɛn di de we dɛn nid fɔ sɛn am.
Send Yu APET shit Rikwaymɛnt dɛn
APET Data Shit ɛn Tɛst Ripɔt dɛn
Di ɔrijinal PET data- sheet matirial ɛn rɛsin-tɛst link dɛn de dɔŋ.
Bifo yu abop pan wan dɔkyumɛnt, kɔnfɔm se di rɛsin gred, sheet matirial strɔkchɔ, tik, risaykul kɔntinyu, prodakshɔn ples ɛn tɛst spɛshal kɔrɛkt to di matirial we dɛn de bay.
![PET data sheet matirial PDF aykɔn]()
Daunlod PET Data Shit
![PET resin SGS ripɔt PDF aykɔn]()
Daunlod PET Resin SGS Ripɔt
Sɛtifiket ɛn Kɔmplians Dɔkyumɛnt dɛn
Di dɔkyumɛnt dɛn we de kin gɛt tɛknikal data sheet matirial s, sefty data sheet matirial s, rɛsin ripɔt, ristrikt-sɔbstans ripɔt, fud-kɔntakt diklareshɔn, maykreshɔn ripɔt ɛn kwaliti-mɛnejmɛnt sɛtifiket.
Dɛn fɔ diskrayb SGS akɔdin to di ɛksaktɔl tɛst we dɛn du ɛn dɛn nɔ fɔ prɛzɛnt am as yunivasal sɛtifiket fɔ it sef, mɛdikal yus ɔ prodak kwaliti.
ISO 9001 gɛt fɔ du wit di manifakta in kwaliti-mɛnejmɛnt sistɛm ɛn i nɔ indipɛndɛnt wan fɔ establish di tɛknikal ɔ fud-kɔntakt pefɔmɛns fɔ di APET sheet matirial .
Di pɔsin we gɛt di sɛtifiket, di adrɛs we dɛn mek am, di standad ɛdyushɔn, di sɛtifiket skɔp ɛn di tɛm we i go wok bifo dɛn pablish am.
![HSQY sɛtifiket ɛn tɛst ripɔt fɔ transparent APET sheet matirial s]( "HSQY PET Sheet Certificates")
Pakɛj ɛn Delivri
Sampul pak: A4 sheet matirial s ɛn smɔl kɔt sampul dɛn kin protɛkt wit PE bag ɛn pak insay rigid kɔriɔ katon.
Rol pak: APET rol kin wund pan pepa kɔr, rap wit PE film ɛn kraft pepa ɛn sikyuɔr pan ɛkspɔt palet.
Shit pak: Flat sheet matirial s kin pak insay protɛktiv bag, katon ɔ lɛk 30kg paket akɔdin to tik ɛn dimɛnshɔn.
Palet pak: Dɛn kin put shit ɛn rol pan plai wud ɔ fumigation-fri ɛkspɔt palet wit edj protɛkshɔn, strap ɛn strɛch film.
Rifrεns palet wet: lεk 500-2000kg dipכnt pan di rol dimεnshכn, sheet matirial saiz, palet strכkchכ εn di hεndlin rikwaymεnt dεm.
Kɔntena lod: Wan rɛfrɛns lod kwantiti na lɛk 20 tan, we de ɔnda di palet dizayn, di prɔdak dimɛnshɔn ɛn di ligal wet limit.
Stɔrej: Stɔr APET sheet matirial s insay os na klin, dray ɛn ventilated eria fa frɔm dairekt san layt, ɔt sɔs, mɔstɔ ɛn pasmak stak prɛshɔn.
Lid tɛm: Stɛndad ɔda dɛn nɔmal fɔ nid lɛk 7-15 dez afta dɛn dɔn kɔnfyus di spɛsifikɛshɔn, sampul, pak ɛn dipɔsit.
![Transparent APET sheet matirial rol ɛn palet ɛkspɔt pak]( "Transparent PET Sheet Packing")
HSQY Globɛl Ɛgzibishin dɛn
![HSQY Plastic Group intanashɔnal pak ɛn plastic ɛgzibishin dɛn]( "HSQY Plastic Group Global Exhibitions")
HSQY Plastik Grup Globɛl Ɛgzibishin Aylayt dɛn
Wetin Mek Yu Pik HSQY as Yu APET shit Spɔla?
1mm transparent APET sheet matirial fɔ pak ɛn thermoforming.
Tiknes we dɛn kɔstɔmayz frɔm lɛk 0.15mm to 3mm.
Rol wit frɔm lɛk 110mm to 1280mm.
Masta rol, slit rol, flat sheet matirial s ɛn kɔt pis.
Klia, tint, kala, mat ɛn ɛmbos opshɔn dɛn.
Tɛmofɔmin, printin, fold-bɔks ɛn displei gred dɛn.
Virgin APET ɛn kɔstɔmayt RPET -kɔntinɛnt opshɔn dɛn.
Anti-statik, anti-fɔg ɛn silikon-kɔt spɛsifikɛshɔn dɛn.
Sampul fɔ fɔm, print, kɔt ɛn bond trayal.
Kwaliti inspekshɔn akɔdin to di spɛsifikɛshɔn dɛn we dɛn dɔn gri fɔ.
Kastamayz pak ɛn intanashɔnal delivri sɔpɔt.
Bifo bɔlk prodakshɔn, HSQY rikɔmɛnd fɔ tɛst di sheet matirial we dɛn dɔn pik yuz di kɔstɔma in aktual tɛmfɔmin mashin, mold, printin ink, kɔt tul, adeziv ɛn pak prɔses.
Kontakt HSQY fɔ Sampul ɛn Prayz
Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt 1mm Transparent APET shit
Wetin na 1mm transparent APET sheet matirial ?
Na klia amorphous PET sheet matirial wit nominal tiknes we na 1mm, we dɛn kin yuz fɔ thermoforming, pak, displei ɛn fabricated komponent.
1mm ikwal to 1000 maykron?
Yɛs. Wan 1mm sheet matirial ikwal to 1000 maykron.
APET na di sem wit PETG ?
Nɔ. APET na amɔf PET , we PETG na glycol-modified kɔpɔlyɛsta wit difrɛn tɛmfɔmin, tafnɛs ɛn bɔndin kwaliti dɛn.
APET na di sem wit CPET ?
Nɔ APET na transparent ɛn dɛn mek am mɔ fɔ standad pak, we CPET na kristal ɛn injinɛri fɔ validet ay-tɛmpracha it- tre aplikeshɔn dɛn.
Yu tink se 1mm APET sheet matirial kin thermoformed?
Yɛs. I kin bi vaykum fכm כ prεshכn fכm afta di hεtin profayl, mold, dro rεshכn εn kol kכndishכn dεm dεn validet.
Us tɛmpracha dɛn kin yuz fɔ thermoform APET ?
di fכs tray dεm kin bigin arawnd 125-155°C, bכt di kכrekt sheet matirial tεmprachכ de dipכnt pan di rεsin, ikwipment, hita, mold εn fכm saykl.
APET nid fɔ prɛdray?
Di tin dɛn we dɛn nid fɔ drɛy dipen pan di rɛsin gred, di mɔstɔ lɛvɛl, di kɔndishɔn fɔ stɔrɔj, di tik ɛn fɔm prɔses. Fɔ fala di instrɔkshɔn dɛn we di spɔlayt we dɛn dɔn gri fɔ gi.
Wetin mek APET kin bi klawd we i de tεmכfכm?
Klaud kin kɔmɔt frɔm ɔva ɔt, kristalizayshɔn, mɔstɔ, strɛs pasmak ɔ ɔt ɔt we nɔ ivin.
Us tiknes HSQY kin prodyuz?
Di prodak we dɛn sho na 1mm, we di kɔstɔmayt APET spɛsifikɛshɔn dɛn de frɔm lɛk 0.15mm to 3mm.
Us rol wit dɛn de?
Rol width frɔm lɛk 110mm to 1280mm de, we de ɔnda tik ɛn prodakshɔn kɔnfɔmeshɔn.
Us standad sheet matirial saiz dɛn de?
Kɔmɔn sheet matirial dimɛnshɔn dɛn inklud 915 × 1220mm ɛn 1000 × 2000mm, wit kɔstɔmayz saiz dɛn we de.
Yu tink se di sheet matirial kin saplae insay rol?
Yɛs. Masta rol ɛn slit rol dɛn kin saplae akɔdin to di wit, di rol lɔng, di rol wet, di kɔr saiz ɛn di ikwipmɛnt dɛn we dɛn nid.
Yu tink se APET sheet matirial kin print?
Suitabl APET surfaces kin bi UV ɔfset print, skrin print ɔ UV inkjet print afta ink-adhesion ɛn curing tɛst.
Yu tink se 1mm APET sheet matirial kin fold?
Yes, bɔt dɛn fɔ tɛst di skɔring dip, fold dairekshɔn, bɛnd rayus ɛn tɛmpracha fɔ ridyus di wayt ɔ krak.
Yu tink se APET sheet matirial kin day kɔt?
Yɛs. Shap day, fayn kliarens ɛn kɔntrol sheet matirial tɛmpracha de ɛp fɔ ridyus di ed krak ɛn wayt.
Yu tink se APET sheet matirial kin bi laser kɔt?
Laser prɔsesin fɔ jɔs yuz afta di ɛksaktɔ APET gred, ikwipmɛnt, ɛkstrakshɔn ɛn ed-kwaliti rikwaymɛnt dɛn dɔn validet. Bɔku tɛm, dɛn kin lɛk fɔ kɔt wit mashin.
Transparent APET fayn fɔ pak it?
Dɛn kin gi wan gred fɔ kɔntakt it we dɛn kɔnfyus di ɛksaktɔl fɔmyulashɔn, di kayn it, di kɔntakt tɛmpracha, di tɛm we dɛn kin kɔntakt ɛn di tin dɛn we dɛn nid fɔ du na di say we dɛn want fɔ go.
Yu tink se SGS ripɔt de pruv se dɛn de fala di lɔ we pɔsin kin gɛt wit it?
Na we di ripɔt kɔba di rilevɛns fɔmyulashɔn, maykreshɔn rikwaymɛnt, it simulshɔn, kɔndishɔn fɔ yuz ɛn dɛstineshɔn rigyuleshɔn.
Yu tink se standad APET maykrowev sef?
Standard APET nɔ fɔ yuz ɔtomɛtik wan na maykrowev. Wan sɛpret validet matirial ɛn finish kɔntena nid fɔ de.
Yu tink se yu kin yuz standad APET na kɔvɛnshɔnal ɔvin?
Nɔ. Standard APET nɔ nɔmal fɔ yuz fɔ kɔvɛnshɔnal-ɔvin. CPET ɔ ɔda validet ɔt-rɛsistant matirial fɔ tink bɔt.
APET na ay-baria pak matirial?
Standard APET de gi yusful pak pefomans bɔt nɔto ɔtomɛtik wan ay ɔksijɛn ɔ mɔstɔ barɛri. sεnsitiv prodakt kin nid EVOH, PE כ כda barεri strכkchכ.
APET na biodegradable?
Standart petrolium-based APET nɔ fɔ diskrayb as bayɔdigradabl ɔ kɔmpɔstabl. I prinsipal ɛnd-ɔf-layf advantej na pɔtɛnɛshɛl risaykul.
APET kin risaykul?
PET kin bi risaykul usay fayn kɔlɛkshɔn ɛn risaykul sistɛm dɛn de, bɔt lɛbl, adeziv, kɔlɔ, kɔtin ɛn mɔltilayer strɔkchɔ dɛn kin afɛkt kɔmpitibliti.
Yu tink se dɛn kin yuz PET we dɛn dɔn risaykul na di sheet matirial ?
Yɛs. RPET -dɛn kin ebul fɔ evaluate di kɔntinyu opshɔn dɛn akɔdin to klia, kɔlɔ, kɔntaminɛshɔn, pefɔmɛns ɛn it-kɔntakt rikwaymɛnt.
Anti-statik APET de?
Anti-statik gred kin divεlכp akɔdin to di rikwayd surface-rεsistεns rεnj, humidity, tεst vכltεj εn ifektiv durashכn.
Anti-fog APET de?
Dɛn kin gi anti-fɔg gred ɔ kɔtin fɔ sɔm sɛlɛkɛt chill-fud pak aplikeshɔn dɛn afta dɛn dɔn kɔnfyus di pefɔmɛns ɛn maykreshɔn rikwaymɛnt dɛn.
Yu tink se fim we de protɛkt pɔsin de?
Wan-sayd ɔ tu-sayd protɛktiv maskin kin bi fɔ sɔm sɛlɛkɛt sheet matirial spɛsifikɛshɔn ɛn fabrik aplikeshɔn dɛn.
Wetin na di minimum ɔda kwantiti?
Di rεfrεns minim כda kwantiti na aprכksimatli 1000kg. Di gred, kɔlɔ ɛn kɔtin dɛn we dɛn kɔstɔmayz kin nid difrɛn MOQ.
APET sampul dɛn de?
A4 sheet matirial s ɛn kɔt sɛmpul dɛn we dɔn de kin de. Tiknes ɔ funkshɔn gred dɛn we dɛn kɔstɔmayz kin nid fɔ tray fɔ prodyuz.
Wetin na di prodakshɔn lida tɛm?
Standart prodakshכn jεnarali nid fכ 7-15 dez afta dεn kכnfכm di spεsifikεshכn, sεmpl, pak εn dipכsit.
Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?
Gi di tik, dimɛnshɔn, rol spɛsifikɛshɔn, apinans, sɔfa, risaykul kɔntinyu, fɔm prɔses, spɛshal fɛnshɔn, ɔda kwantiti, pak ɛn dɛstineshɔn.
Get wan 1mm APET shit Kot
Bɔt HSQY Plastik Grup
HSQY Plastik Grup de saplae APET sheet matirial s, PETG sheet matirial s, GAG sheet matirial s, PET pak film, PVC sheet matirial s, PP sheet matirial s, CPET trey dɛn ɛn kɔstɔmayz plastic matirial to intanashɔnal B2B kɔstɔma dɛn.
HSQY de sɔpɔt thermoforming kɔmni dɛn, pak kɔnvɔta, printa, displei manifakta, fud-pak prodyusɔ, impɔtɔ ɛn distribyushɔn wit matirial sɛlɛkshɔn, sɛmpul, kɔstɔmayz prodakshɔn, inspekshɔn ɛn ɛkspɔt pak.
Rikwest fɔ kot di prayz ɛn Sampul
