1mm PET ƒe agbalẽ si me kɔ

1mm Transparent APET Agbalẽvi na Thermoforming

HSQY wɔa 1mm APET agbalẽ siwo me kɔ na thermoformed packaging, blister packs, trays, clamshells, folding boxes, packaging windows, asitsaƒewo ƒe ɖeɖefiawo, ametakpɔnu nutsyɔnuwo kple plastic ƒe akpa siwo wowɔ ɖe ɖoɖo nu.

APET, alo amorphous polyethylene terephthalate, nye polyester nusi me kɔ eye wòsẽna si wotia le eƒe nukpɔkpɔ, keklẽ, sesẽ, sesẽ kple dzoxɔxɔ ƒe dɔwɔwɔ ta.

Nusi woɖe fia la ƒe titrime le ŋkɔ me nye 1mm. APET ƒe agbalẽ kple agbalẽ xatsaxatsa ƒe nɔnɔme siwo wowɔ ɖe ɖoɖo nu la li tso abe 0.15mm va ɖo 3mm ene, le ewɔwɔ ƒe ŋutete, nudɔdɔ ƒe agbɔsɔsɔ kple dɔwɔwɔ ƒe nudidiwo nu.

Standard roll widths tso abe 110mm va ɖo 1280mm ene. Flat-sheet ƒe didime siwo bɔ dometɔ aɖewoe nye 915 × 1220mm kple 1000 × 2000mm, eye woƒe kekeme kple lãɖeɖe ƒe lolome siwo wowɔ ɖe ɖoɖo nu li.

Woate ŋu adzro dzidzenu siwo me kɔ, siwo me kɔ, siwo ƒe amadede nye blɔ si me kɔ, esiwo me kɔ, siwo ƒe amadede nye matte, esiwo me tsikpe le, esiwo ŋu woŋlɔ nu ɖo, siwo tsi tre ɖe nusiwo meʋãna o, esiwo tsi tre ɖe afu ŋu, esiwo wotsɔ silicone ƒo ɖe wo ŋu kple esiwo wogbugbɔ zãna ƒe dzesiwo ŋu le tɔtrɔ kple wo babla ƒe ɖoɖo si woɖo be woawɔ nu.

Mele be woagblɔ le eɖokui si be APET si wozãna ɖaa be ate ŋu agblẽ nu le nugbagbewo ŋu, si woate ŋu atɔ dzoe, si me microwave mele o, si te ŋu nɔa te ɖe UV nu le gota, mɔxenu gã alo nuɖuɖu ƒe kadodo ƒe sewo o. Nɔnɔme siawo hiã be woawɔ atike pɛpɛpɛ, agbalẽvi ƒe ɖoɖo blibo kple dodokpɔ ŋuti nuŋlɔɖi siwo sɔ.

Dzro nu bubuwo me HSQY PET agbalẽvi nuwɔna na babla, agbalẽtata, dzoxɔxɔ kple dɔwɔƒewo ƒe dɔwɔwɔ.

Bia 1mm APET ƒe Agbalẽvi ƒe Asixɔxɔ    Bia APET ƒe Kpɔɖeŋuwo

1mm PET Sheet Video si me kɔ

Kpɔ video si le ete be nàto HSQY ƒe PET agbalẽ siwo me kɔ kple nubablɛ ƒe dɔwɔɖoɖo siwo do ƒome kplii me.

APET ƒe Agbalẽvi ƒe Nɔnɔmetata siwo me kɔ

Nukae Nye 1mm Transparent APET Sheet?

APET agbalẽ si me kɔ si ƒe didime nye milimeta 1 nye PET nusi me nɔnɔme mele o si sesẽ eye eƒe titrime le ŋkɔ me nye milimeta 1, si sɔ kple micron 1000.

Alesi wowɔe si me nɔnɔme mele o la wɔnɛ be agbalẽa nɔa keklẽm eye wòsɔna na dzoxɔxɔ ƒe nɔnɔme ne wodo dzoe le fesre si sɔ si me wowɔa dɔ le me.

Ne wotsɔe sɔ kple nubablɛ film siwo le tsɛ wu la, 1mm ƒe agbalẽ naa sesẽme, ŋutilã, ŋusẽkpɔɖeamedzi ƒe tsitretsitsi kple nɔnɔme léle ɖe te geɖe wu na agba kpekpewo, nubablɛ ƒe nusiwo wotsɔ dea eme, ametakpɔnu nutsyɔnu kple nukpɔkpɔ ƒe akpawo.

Dɔwɔwɔ mamlɛtɔ nɔ te ɖe PET resin, ememe viscosity, nusiwo wogbugbɔ zã, additives, extrusion nɔnɔmewo, titrime mɔɖeɖe, anyigba dzi dɔwɔwɔ kple wɔwɔ ƒe ɖoɖo.

APET, PETG, CPET kple BOPET ƒe vovototowo

Ele be nuƒlelawo nade dzesi PET ƒomevi si tututu woatsɔ awɔe tsɔ wu be woatia nusiwo woatu ɖe nyagbe PET gbalẽvi dzi ko.

1mm Transparent APET Agbalẽvi ƒe Nɔnɔmewo

Ele be woaɖo kpe xexlẽdzesiwo ƒe dɔwɔwɔ ƒe asixɔxɔwo katã dzi to mɔ̃ɖaŋu ŋuti nyatakaka gbalẽvi zazã me na APET ƒe aŋɔ si sɔ pɛpɛpɛ, nusiwo wogbugbɔ zã ƒe seƒe, eƒe titrime kple ewɔwɔ ƒe hatsotso.

Mɔ̃ɖaŋununya ƒe Dɔwɔwɔ ƒe Nudidiwo

Nukatae Nàtia 1mm APET Agbalẽvi?

• Sesẽme geɖe wu: Enaa xɔtuɖaŋu ƒe ŋutilã geɖe wu APET-nubablɛ film tsɛ aɖe.

• Nukpɔkpɔ si me kɔ: Enaa nusiwo wobla ɖe agba me alo nɔnɔmetata siwo woɖena fiana la nɔa dzedzem.

• Thermoforming ŋutete: Woate ŋu awɔe wòazu trays, inserts, covers kple akpa siwo me kɔ tsitotsito le dɔwɔwɔ ƒe kpeɖodzi megbe.

• Tsitretsitsi ɖe ŋusẽkpɔɖeamedzi ŋu: Enaa sesẽme si ŋu viɖe le na asiléle, tsɔtsɔ yi teƒe bubuwo kple akpa siwo wowɔ.

• Agbalẽtata: Anyigba siwo sɔ ate ŋu ado alɔ UV, screen kple offset tata.

• Fabrication options: Woate ŋu atsoe, aƒoe, akplɔe, ablae, axɔ dzesi eye ablae.

• Nubablɛwo ƒe dzedzeme: Enaa wokpɔa nusiwo le asitsaƒewo kple dɔwɔƒewo ƒe nubablɛwo me nyuie.

• Nusiwo wogbugbɔ zã ƒe ŋutete: Woate ŋu ada RPET ƒe tiatiawɔblɔɖewo kpɔ le nusiwo me kɔ kple wo dzi wɔwɔ ƒe nudidiwo nu.

Thermoforming 1mm Transparent APET ƒe agbalẽ

Woate ŋu awɔ dɔ tso APET ŋu to vacuum wɔwɔ, nyaƒoɖeamenu wɔwɔ, plug-assist wɔwɔ kple matched-mold wɔwɔ me.

Gbãtɔ ƒe wɔwɔme dodokpɔ ateŋu adze egɔme tso abe 125-155°C ene, gake dzoxɔxɔ nyuitɔ nɔ te ɖe resin ƒe grade, agbalẽ ƒe dzoxɔxɔ, dzoxɔxɔnamɔ̃ ƒe ƒomevi, dzoxɔxɔ ƒe ɣeyiɣi, draw ratio, aŋɔ ƒe dzoxɔxɔ kple tsatsam ƒe duƒuƒu dzi.

Ele be woado dzo ɖe agbalẽa dzi sɔsɔe. Dzoxɔxɔ si gbɔ eme le teƒea ate ŋu ana kristalo nazu kristalo, afu, agbã, anyigba ƒe nɔnɔme gblẽ alo gli ƒe mama si mesɔ o.

Predrying nudidiwo nɔ te ɖe resin, agbalẽa ƒe tsidzadza, nudzraɖoƒe ƒe nɔnɔmewo, wɔwɔ ƒe tsatsam kple nudzrala ƒe mɔfiamewo dzi. Ele be nuƒlelawo naƒo asa na ebubu be woate ŋu awɔ APET ƒe hatsotso ɖesiaɖe evɔ womaƒu o.

1mm Transparent PET Sheet ƒe dɔwɔwɔwo

• Blister packaging: Blister ƒe akpa siwo wɔa dɔ sesẽ na dɔwɔnuwo, elektrɔnikmɔ̃wo, xɔtunuwo kple nuƒlelawo.

• Dzoxɔxɔ ƒe agbawo: Klɔ nusiwo wotsɔ de eme, ʋuɖoɖo ƒe agbawo kple nusiwo wotsɔ ɖoa ​​teƒe ƒe agbawo.

• Clamshell packaging: Nubablɛ sesẽ siwo me kɔ na asitsanuwo.

• Nuɖuɖu ƒe babla: Trak kple nugoe siwo zãa nuɖuɖu ƒe kadodo ƒe dzesi si dzi woda asi ɖo.

• Fesre siwo wotsɔ blaa nu: Fesre siwo me kɔ na pepa-kakɛwo kple aɖaka siwo woate ŋu abla.

• Asitsaƒewo ƒe ɖeɖefiawo: Nudzraɖoƒewo, POP ɖeɖefiawo, agbalẽdzraɖoƒe ƒe akpawo kple ʋuƒo siwo me kɔ.

• Ametakpɔnu: Nutsyɔnu siwo me kɔ na dɔwɔnuwo, elektrɔnikmɔ̃wo kple nusiwo woɖena fiana.

• Agbalẽtata ƒe dɔwɔnuwo: Dzesi siwo wota kple UV, nɔnɔmetatawo, kaɖiwo kple boblododo ƒe akpa siwo me kɔ.

• Nuŋlɔti ƒe nuwɔna: Nutsyɔnu sesẽwo, mamanuwo, nɔnɔmetatawo kple nuŋlɔɖi ƒe akpawo.

• Awu ƒe bablawo: Awudziwui ƒe nusiwo wotsɔ dea eme, nubablɛ ƒe kpeɖeŋutɔ kple nutsyɔnu ƒe akpa siwo me kɔ.

Agbalẽtata, Lãɖeɖe Kple Nuwɔwɔ

Woate ŋu atrɔ APET-gbadzɛ siwo me kɔ la woazu nusiwo wota, wotso, woxatsa, wobla wo kple esiwo wotsɔ dzoxɔxɔ wɔe.

Nuɖuɖu-Kadodo ƒe Nudidiwo

Polymer ŋkɔ APET meɖoa nuɖuɖu ƒe kadodo ƒe sewo dzi le eɖokui si o.

Nuɖuɖu-kadodo ƒe nyonyo nɔ te ɖe PET ƒe aŋɔ, nusiwo wogbugbɔ zã, nusiwo naa nu ʋãna ƒe nugbagbevi siwo susɔ, nusiwo wotsɔ kpe ɖe eŋu, amadedewo, nusiwo tsi tre ɖe mɔxexeɖedɔléle nu, silicone-dɔdamɔnu, nusiwo wotsɔ blaa nu, ink, nusiwo wotsɔna léa nu ɖe ​​nu ŋu kple nusiwo wotsɔ blaa nu ƒe wɔwɔme si wowu enu dzi.

Ele be nuƒlelawo nade dzesi nuɖuɖu ƒomevi, dzoxɔxɔ si woate ŋu aƒo ka na, ɣeyiɣi didi si woatsɔ aƒoe, nɔnɔme siwo me wodzraa nuɖuɖu ɖo, alesi woakɔ nuɖuɖuae kple afisi woayi-asi ƒe ɖoɖowɔwɔ.

Nuŋlɔɖi siwo sɔ ate ŋu anye gbeƒãɖeɖe be wowɔ ɖe seawo dzi, ʋuʋu dodokpɔ me tsonu, resin ƒe mɔɖeɖe ŋuti nyatakakawo kple nusiwo wogbugbɔ zã ƒe mɔɖeɖe le afisi wòsɔ le.

Dzoxɔxɔ Kple Dzoxɔxɔ ƒe Seɖoƒewo

Wozãa APET si wozãna ɖaa koŋ na ambient, chilled, frozen kple selected warm-fill packaging tsɔ wu be woazãe le dzodoƒe si wozãna ɖaa.

Zi geɖe la, APET si wozãna ɖaa ƒe glass-trɔtrɔnutome nɔa dzoxɔxɔ si do ƒome kple nubablɛ siwo woate ŋu atɔ dzoe la te, eyata nusi wotsɔ wɔe ate ŋu afa, atɔtɔ alo abu eƒe didime ƒe liƒo ne wodoe ɖe dzoxɔxɔ si gbɔ eme me.

Mele be woado APET si wozãna ɖaa ɖe ŋgɔ le eɖokui si be wòanye microwave-dedie, conventional-oven-safe alo asɔ na tsi ƒoƒo ƒe dɔwɔwɔ o.

Zi geɖe la, ele be dɔ siwo bia be woada asi ɖe dzodoƒe ƒe tsitretsitsi dzi la akpɔ CPET alo nu bubu si te ŋu nɔa te ɖe dzoxɔxɔ nu.

Standard kple High-Barrier PET Dɔwɔɖoɖowo

Gbugbɔgazã Kple Nusiwo Li Eteƒe Didi

Standard PET nye esi woateŋu agbugbɔ azã le afisiwo nuƒoƒoƒu, vovototodedeameme kple wo gbugbɔgazã ƒe xɔtuɖoɖo siwo sɔ le.

Mele be woagblɔ be APET si woɖo ɖi la ate ŋu agblẽ nu le nugbagbewo ŋu alo woate ŋu atsɔe awɔ gbeɖuɖɔ o negbe ɖe wodo nusi tututu wotsɔ wɔe kpɔ le wo ɖokui si eye woɖo kpe edzi be eɖo dzidzenu si sɔ gbɔ hafi.

Alesi woate ŋu agbugbɔ agbalẽvi si wowɔ vɔ la awɔ dɔe nɔ te ɖe eƒe amadede, eƒe ŋkɔwo, nusiwo wotsɔna léa nu ɖe ​​nu ŋu, ink, nusiwo wotsɔ blae, mɔxenu ƒe ƒuƒoƒo, nutrenuwo kple eƒe akpa siwo kpe ɖe eŋu dzi.

Woateŋu ade RPET me nyawo eme le eme kɔ, amadede, ɖiƒoƒo, mɔ̃wo ƒe dɔwɔwɔ kple nuɖuɖu-kadodo ƒe nudidiwo nu.

Ele be nuƒlela siwo bia be woaxɔ nusiwo wogbugbɔ zãna ƒe nya la nade dzesi nusiwo wogbugbɔ zãna ƒe ɖoɖo si woɖo tae eye woada agbalẽviawo ƒe nɔnɔme bliboa kpɔ.

UV, Gbedoxɔ kple Dzoxɔxɔ ƒe Nudidiwo

Standard clear APET nye koŋ woɖoe na xɔme babla, agbalẽtata kple ɖeɖefia dɔwo.

Ne èle gota ɣeyiɣi didi la, ate ŋu ana wòazu ɣie, eƒe keklẽ nabu, wòagbã eye wòatrɔ le mɔ̃a ƒe dɔwɔwɔ ŋu.

Gbedoxɔ me dɔwɔwɔ bia be woatsɔ UV-si li ke ƒe dzesi si sɔ na dɔwɔwɔ koŋ kple yame ƒe nɔnɔme ƒe nudidi siwo me kɔ nyuie.

APET ate ŋu akpɔ UL 94 HB ƒe emetsonu le atike aɖewo kple woƒe titrime me, gake mele be woawɔ esia ɖe atike ɖesiaɖe ŋu nyatakaka si sɔ kplii manɔmee o.

Nu ƒe dzoxɔxɔ ƒe emetsonu meɖoa dzo ƒe hatsotso si le agba blibo, nukpɔkpɔ, mɔ̃dzikpɔla alo xɔtuɖoɖo ƒe ɖoɖo anyi o.

Dodokpɔ Siwo Wokafu be Woatsɔ Akpɔ Dzedzeme Dzi

• PET resin kple nusiwo wotsɔ wɔe ƒe dzeside ƒe kpeɖodzi.

• Ðetugbui leaƒe kple nusiwo wogbugbɔ zã ƒe alafa memamã.

• Titrime kple titrime ƒe mɔɖeɖe ɖe nu ŋu.

• Roll ƒe kekeme, agbalẽ ƒe didime kple diagonal tolerance.

• Roll ƒe didime, roll ƒe kpekpeme, core ƒe lolome kple winding mɔfiame.

• Winding ƒe nyonyome, nugbɔ ƒe ɖoɖowɔwɔ kple didiƒekpɔmɔ̃.

• Sheet flatness, bow, curl kple nugbɔ nɔnɔme.

• Density alo nuheŋusẽ tɔxɛ.

• Kekeli ƒe kaka, haze, tint kple gloss.

• Yellowness index kple batch-to-batch amadede ƒe vovototo.

• Teƒe yibɔwo, gelwo, kuɖɔwo, fliwo, ʋuʋudediwo kple ɖiƒoƒo.

• Tensile ŋusẽ, didime kple modulus.

• Ŋusẽkpɔɖeamedzi ƒe dɔwɔwɔ le dzoxɔxɔ si hiã me.

• Dzoxɔxɔ ƒe ɖiɖi le mɔ̃a kple mɔ siwo le tsia dzi.

• Thermoforming dzoxɔxɔ fesre kple web sag.

• Kpa goglome kple gli-titrime mama.

• Yevuwɔwɔ kple kristalowɔwɔ le ewɔwɔ vɔ megbe.

• Agbalẽtata ƒe adhesion, dɔyɔyɔ kple abrasion tsitretsitsi.

• Ku lãɖeɖe, punching, scoring kple folding dɔwɔwɔ.

• Adhesive ƒe kadodo kple peel ƒe ŋusẽ.

• Anti-static, anti-fog alo silicone-coating dɔwɔwɔ le afisi wòhiã.

• Nuɖuɖu ƒe kadodo ƒe ʋuʋu ƒe dodokpɔwo le afisi wòsɔ le.

• Packing, pallet kple nugoe-agbawo me dzodzro.

APET ƒe Agbalẽvi ƒe Tiatiawɔblɔɖe

• Featured 1mm transparent APET agbalẽvi.

• Wotrɔ asi le woƒe titrime ŋu tso abe 0.15mm va ɖo 3mm ene.

• Roll ƒe kekeme tso abe 110mm va ɖo 1280mm.

• 915 × 1220mm kple 1000 × 2000mm dzidzenu agbalẽwo.

• Trɔ asi le agbalẽa ƒe didime kple kakɛ siwo wotso ŋu.

• Master rolls, slit agbalẽ xatsaxatsawo kple agbalẽ gbadzawo.

• Nusiwo me kɔ, siwo ƒe amadede nye blɔ, siwo ƒe amadede me kɔ eye womekɔ o.

• Glossy, matte, frosted kple embossed anyigbawo.

• Axa ɖeka alo axa eve ƒe ametakpɔnu film.

• Virgin APET kple RPET-emenyawo ƒe ɖoɖo siwo wowɔ ɖe ɖoɖo nu.

• Thermoforming, agbalẽtata, folding-box kple ɖeɖefia ƒe dzesiwo.

• Nuɖuɖu ƒe kadodo ƒe dzesiwo le nuŋlɔɖiwo nu.

• Anti-static, anti-fog kple silicone-si wotsɔ tsyɔ dzesiwo.

• Wotrɔ asi le ŋkɔwo, kakɛwo, palletwo kple agbalẽɖoɖoɖa ƒe dzesiwo ŋu.

Nyatakaka Siwo Hiã Na APET ƒe Agbalẽvi ƒe Nyayɔyɔ

• Wobia be woate ŋu alɔ̃ ɖe eƒe titrime kple eƒe titrime dzi.

• Roll ƒe kekeme alo agbalẽa ƒe didime.

• Wobia tso agbalẽ xatsaxatsa ƒe didime, agbalẽ xatsaxatsa ƒe kpekpeme kple nu vevi ƒe didime.

• Dzedzeme si me kɔ, si ƒe amadede nye blɔ, amadede alo esi me mekɔ o.

• Glossy, matte, frosted alo embossed anyigba.

• Ametakpɔnu-film ƒe nudidi.

• Ðetugbi Nɔaƒe APET alo RPET ƒe alafa memamã si wobia.

• Thermoforming goglome, aŋɔ ƒe didime kple dɔwɔnuwo.

• Agbalẽtata, lãɖeɖe, babla, babla alo ewɔwɔ ƒe ɖoɖo.

• Wobia be eme nakɔ, afu kple amadede ƒe seɖoƒe.

• Nuɖuɖu-kadodo ƒe nɔnɔmewo kple asi si me woayi.

• OTR, WVTR, nutrenu alo mɔxenu ƒe dɔwɔwɔ si hiã.

• Anti-static, anti-fog, silicone alo UV ƒe nudidiwo.

• Mɔ̃ɖaŋununya kple sedziwɔwɔ ŋuti nuŋlɔɖi siwo hiã.

• Agbɔsɔsɔ gbãtɔ kple ƒe sia ƒe ƒe didi si wobu.

• Packing, destination port kple ŋkeke si wobia be woatsɔe vɛ.

Ðo Wò APET ƒe Agbalẽa ƒe Nudidiwo ɖa

PET ƒe Nyatakakagbalẽviwo Kple Dodokpɔ Ŋuti Nyatakakawo

Wolé PET ƒe nyatakaka-gbalẽvi gbãtɔ kple resin-dodokpɔ ƒe kadodowo ɖe ete.

Hafi nàɖo ŋu ɖe nuŋlɔɖi aɖe ŋu la, ɖo kpe edzi be aŋɔ ƒe hatsotso, agbalẽa ƒe wɔwɔme, eƒe titrime, nusiwo wogbugbɔ zã, teƒe si wowɔe kple dodokpɔ ƒe kpɔɖeŋu sɔ kple nusi nèƒle.

   Wɔ PET Data Sheet ƒe kɔpi

   Wɔ PET Resin SGS Nyatakaka ƒe kɔpi

Ðaseɖigbalẽwo Kple Sedziwɔwɔ Ŋuti Nuŋlɔɖiwo

Nuŋlɔɖi siwo li ate ŋu anye mɔ̃ɖaŋu ŋuti nyatakakawo, dedienɔnɔ ŋuti nyatakakawo, aŋɔ ŋuti nyatakakawo, atike siwo ŋu seɖoƒe le ŋuti nyatakakawo, nuɖuɖu ƒe kadodo ŋuti nyatakakawo, ʋuʋu ŋuti nyatakakawo kple nyonyome dzikpɔkpɔ ƒe ɖaseɖigbalẽwo.

Ele be woaɖɔ SGS le dodokpɔ si tututu wowɔ nu eye mele be woatsɔe afia be enye xexeame katã ƒe ɖaseɖigbalẽ le nuɖuɖu ƒe dedienɔnɔ, atikewɔwɔ me zazã alo atike ƒe nyonyome ŋu o.

ISO 9001 ku ɖe adzɔnuwɔƒea ƒe nyonyome-dzikpɔkpɔ ƒe ɖoɖoa ŋu eye meɖoa APET-gbalẽvia ƒe mɔ̃ɖaŋununya alo nuɖuɖu-kadodo ƒe dɔwɔwɔ anyi le eɖokui si o.

Ele be woaɖo kpe ɖaseɖigbalẽa tɔ, adzɔnuwɔƒe ƒe adrɛs, tata si wozãna ɖaa, ɖaseɖigbalẽa ƒe lolome kple ɣeyiɣi si woatsɔ awɔ dɔe dzi hafi woatae.

Nubablɛwo Kple Wo Ðoɖoɖa

Kpɔɖeŋuwo babla: Woate ŋu atsɔ PE kotokuwo akpɔ A4 agbalẽwo kple kpɔɖeŋu sue siwo wotso ta eye woabla wo ɖe agbalẽɖoɖoɖaɖaka sesẽwo me.

Agbalẽ xatsaxatsawo ƒe babla: Woate ŋu abla APET agbalẽ xatsaxatsawo ɖe pepa ƒe nu veviwo dzi, abla wo kple PE film kple kraft pepa eye woatsɔ wo abla ɖe nusiwo wotsɔ ɖoa ​​duta dzi.

Agbawo ƒe babla: Woate ŋu abla agbalẽ gbadzawo ɖe ametakpɔkotokuwo, kakɛwo alo agba siwo ade kilogram 30 me le woƒe titrime kple woƒe didime nu.

Pallet packing: Woate ŋu atsɔ agbalẽ xatsaxatsawo ade plywood alo fumigation-free export pallets kple nugbɔ takpɔkpɔ, ka kple stretch film.

Nufiame pallet kpekpeme: Anɔ abe 500-2000kg le agbalẽ xatsaxatsa ƒe didime, agbalẽ ƒe lolome, pallet ƒe wɔwɔme kple asiléle ƒe nudidiwo nu.

Agbatsɔtsɔ le nugoe me: Agbatsɔtsɔ ƒe agbɔsɔsɔme si woatsɔ awɔ numekukui anɔ abe tɔn 20 ene, le pallet ƒe nɔnɔme, nusiwo wowɔ ƒe didime kple kpekpeme ƒe seɖoƒe siwo le se nu nu.

Nudzraɖoƒe: Dzra APET-gbadzɛwo ɖo ɖe xɔ me le teƒe si le dzadzɛ, si me tsi mele o eye ya le eme si didi tso ɣe ƒe keklẽ tẽ, dzoxɔxɔtsoƒewo, tsidzadza kple wo ƒoƒo ƒu ƒe nyaƒoɖeamenu si gbɔ eme gbɔ.

Ɣeyiɣi si woatsɔ awɔ dɔe: Zi geɖe la, nudɔdɔ siwo wowɔna ɖaa bia abe ŋkeke 7-15 ene le esi woɖo kpe nya si wogblɔ, kpɔɖeŋu, babla kple ga si wotsɔ de eme dzi vɔ megbe.

HSQY Xexeame Katã ƒe Nukpɔkpɔwo

Nukatae Nàtia HSQY be wòanye Wò APET Sheet Dɔwɔƒe?

• 1mm APET agbalẽ si me kɔ na nubablɛwo kple dzoxɔxɔ ƒe wɔwɔme.

• Wotrɔ asi le woƒe titrime ŋu tso abe 0.15mm va ɖo 3mm ene.

• Roll ƒe kekeme tso abe 110mm va ɖo 1280mm.

• Master rolls, slit rolls, agbalẽ gbadzawo kple kakɛ siwo wotso.

• Tiatia siwo me kɔ, amadede, amadede, matte kple embossed.

• Thermoforming, agbalẽtata, folding-box kple ɖeɖefia ƒe dzesiwo.

• Virgin APET kple RPET-emenyawo ƒe tiatia siwo wowɔ ɖe ɖoɖo nu.

• Anti-static, anti-fog kple silicone-coated nɔnɔmewo.

• Kpɔɖeŋuwo na wɔwɔ, tata, lãɖeɖe kple babla dodokpɔwo.

• Dzɔdzɔmeŋutete me dzodzro le nɔnɔme siwo dzi woda asi ɖo nu.

• Nubabla si wowɔ ɖe ɖoɖo nu kple dukɔwo dome nudɔdɔ ƒe kpekpeɖeŋu.

Hafi woawɔe le agbɔsɔsɔ gã me la, HSQY kafui be woado agbalẽvi si wotia la kpɔ to asisi la ƒe dzoxɔxɔ ƒe mɔ̃ ŋutɔŋutɔ, aŋɔ, agbalẽtata ƒe nuŋlɔtsi, lãtsodɔwɔnuwo, nulénu kple nubablɛ ƒe mɔnu zazã me.

Te ɖe HSQY ŋu hena Kpɔɖeŋuwo kple Asixɔxɔ

Nya Siwo Wobia Enuenu Ku Ðe 1mm Transparent APET Sheet Ŋu

Nukae nye 1mm APET gbalẽvi si me kɔ?

Enye PET gbadzɛ si me kɔ si me nɔnɔme mele o si ƒe titrime le ŋkɔ me nye 1mm, si wozãna zi geɖe na dzoxɔxɔ ƒe wɔwɔme, babla, ɖeɖefiawo kple akpa siwo wowɔ.

Ðe 1mm sɔ kple micron 1000a?

Ɛ̃. 1mm ƒe agbalẽa sɔ kple 1000 microns.

Ðe APET sɔ kple PETG?

Ao, APET nye PET si me nɔnɔme mele o, gake PETG nye copolyester si wotsɔ glycol trɔ asi le si ƒe dzoxɔxɔ ƒe nɔnɔme, sesẽme kple kadodo ƒe nɔnɔme vovovowo le.

Ðe APET sɔ kple CPETa?

Ao, APET nye nusi me kɔ eye wowɔe koŋ na nubablɛ siwo wozãna ɖaa, gake wotsɔ kristalo wɔ CPET eye wowɔe na nuɖuɖugoe siwo ƒe dzoxɔxɔ de ŋgɔ wu zazã siwo ŋu woda asi ɖo.

Ðe woate ŋu awɔ 1mm APET agbalẽa thermoformed?

Ɛ̃. Ate ŋu anye vacuum si wowɔ alo nyaƒoɖeamenu si wowɔ le dzoxɔxɔ ƒe nɔnɔme, aŋɔ, hehe ƒe sɔsɔme kple fafa ƒe nɔnɔmewo ƒe kpeɖodzi vɔ megbe.

Dzoxɔxɔ kae wozãna tsɔ wɔa dzoxɔxɔ ƒe APET?

Dodokpɔ gbãtɔwo ateŋu adze egɔme le 125-155°C lɔƒo, gake agbalẽa ƒe dzoxɔxɔ nyuitɔ nɔ te ɖe aŋɔ, dɔwɔnuwo, dzoxɔxɔnamɔ̃, aŋɔ kple wɔwɔme ƒe tsatsam dzi.

Ðe APET bia be woatsɔe aƒu gbe do ŋgɔa?

Predrying ƒe nudidiwo nɔ te ɖe resin ƒe grade, tsi ƒe agbɔsɔsɔ, nudzraɖoƒe ƒe nɔnɔme, titrime kple wɔwɔme ƒe ɖoɖo dzi. Wɔ ɖe nudzrala ƒe mɔfiame siwo dzi woda asi ɖo dzi.

Nukatae APET va zua alilikpo le dzoxɔxɔ ƒe nɔnɔme wɔwɔ me?

Alilikpo ate ŋu atso dzoxɔxɔ si gbɔ eme, kristalo, tsidzadza, nuteɖeamedzi si gbɔ eme alo dzoxɔxɔ si mesɔ o gbɔ.

Titrime kawoe HSQY ate ŋu awɔ?

Nusi woɖe fia la nye 1mm, esime APET ƒe nɔnɔme siwo wowɔ ɖe ɖoɖo nu li tso abe 0.15mm va ɖo 3mm ene.

Agbalẽxatsaxatsa ƒe kekeme kawoe li?

Roll ƒe kekeme tso abe 110mm va ɖo 1280mm ene li, le eƒe titrime kple ewɔwɔ ƒe kpeɖodzi te.

Agbalẽvi ƒe lolome siwo wozãna ɖaa kawoe li?

Agbalẽa ƒe didime siwo bɔ dometɔ aɖewoe nye 915 × 1220mm kple 1000 × 2000mm, eye woƒe lolome siwo wowɔ ɖe ɖoɖo nu li.

Ðe woate ŋu atsɔ agbalẽa ana le agbalẽ xatsaxatsawo mea?

Ɛ̃. Woate ŋu ana master rolls kple slit rolls le kekeme, roll ƒe didime, roll ƒe kpekpeme, core ƒe lolome kple dɔwɔnuwo ƒe nudidiwo nu.

Ðe woate ŋu ata APET ƒe agbalẽvia?

APET ƒe anyigba siwo sɔ ate ŋu anye UV offset tata, screen print alo UV inkjet tata le ink-adhesion kple curing dodokpɔwo megbe.

Ðe woate ŋu abla 1mm APET agbalẽa?

Ẽ, gake ele be woado dzesidede ƒe goglome, alesi woblae, alesi wobɔbɔe kple dzoxɔxɔ kpɔ be woaɖe ɣie alo gbagbã dzi akpɔtɔ.

Ðe woate ŋu atso APET ƒe agbalẽa?

Ɛ̃. Ku ɖaɖɛwo, ʋuʋu si sɔ kple agbalẽa ƒe dzoxɔxɔ si dzi wokpɔna kpena ɖe eŋu be nugbɔ ƒe gbagbã kple eƒe ɣie dzi ɖena kpɔtɔna.

Ðe woate ŋu atsɔ laser atso APET ƒe agbalẽa?

Ne woda asi ɖe APET ƒe dzeside tututu, dɔwɔnuwo, eɖeɖe kple nugbɔ-nɔnɔme ƒe nudidiwo dzi vɔ ko hafi woazã laser dɔwɔwɔ. Zi geɖe la, wodina be woatsɔ mɔ̃ atsoe.

Ðe APET si me kɔ la sɔ na nuɖuɖu babla?

Woate ŋu ana nuɖuɖu ƒe kadodo ƒe dzesi ne woɖo kpe atike si tututu wowɔ, nuɖuɖu ƒomevi, dzoxɔxɔ si woatsɔ aƒoe, ɣeyiɣi si woatsɔ aƒoe kple afisi woayi-asi ƒe nudidiwo dzi.

Ðe SGS ƒe nyatakaka aɖe ɖo kpe nuɖuɖu ƒe kadodo dzi wɔwɔ dzia?

Ne nyatakakaa ƒo nu tso atikewɔmɔnu si sɔ, ʋuʋu ƒe nudidiwo, nuɖuɖu ƒe nɔnɔmetatawo, zazã ƒe nɔnɔmewo kple teƒe si woayi ƒe ɖoɖowɔwɔ ŋu ko hafi.

Ðe APET microwave si wozãna ɖaa le dediea?

Mele be woazã APET si wozãna ɖaa le wo ɖokui si le microwave me o. Wohiã na nusi ŋu woda asi ɖo ɖe vovo kple nugoe si wowɔ vɔ.

Ðe woate ŋu azã APET si wozãna ɖaa le dzodoƒe si wozãna ɖaa mea?

Ao, zi geɖe la, womeɖo APET si wozãna ɖaa na zazã le dzodoƒe si wozãna ɖaa o. Ele be woabu CPET alo nu bubu si ŋu woda asi ɖo si te ŋu nɔa te ɖe dzoxɔxɔ nu ŋu.

Ðe APET nye nusiwo wotsɔ blaa nu siwo ŋu mɔxenu geɖe lea?

Standard APET naa nubablɛ ƒe dɔwɔwɔ si ŋu viɖe le gake menye oxygen alo tsidzadza ƒe mɔxenu si sɔ gbɔ le eɖokui si o. Atike siwo sea veve ate ŋu abia EVOH, PE alo mɔxenu bubu.

Ðe APET te ŋu gblẽna le nugbagbeviwo ŋua?

Mele be woaɖɔ APET si wotu ɖe ami si wozãna ɖaa dzi be enye nusi gblẽna le nugbagbewo ŋu alo woate ŋu atsɔe awɔ gbeɖuɖɔ o. Viɖe vevitɔ si le eŋu le eƒe agbenɔƒe ƒe nuwuwu enye alesi wòate ŋu azãe ake.

Ðe woate ŋu agbugbɔ APET awɔ dɔa?

Woateŋu agbugbɔ PET awɔ le afisiwo nuƒoƒoƒu kple wo gbugbɔgazã ƒe ɖoɖo siwo sɔ le, gake dzesidenuwo, nusiwo wotsɔna léa nu ɖe ​​nu ŋu, amadedewo, nusiwo wotsɔ blaa nu kple xɔtunu siwo le ƒuƒoƒo geɖe me kpɔa ŋusẽ ɖe woƒe ɖekawɔwɔ dzi.

Ðe woate ŋu azã PET si wogbugbɔ zã le agbalẽa mea?

Ɛ̃. Woate ŋu ada RPET-nuɖuɖu ƒe tiatiawɔblɔɖewo kpɔ le eme kɔ, amadede, ɖiƒoƒo, dɔwɔwɔ kple nuɖuɖu-kadodo ƒe nudidiwo nu.

Ðe anti-static APET lia?

Woate ŋu ato anti-static grades vɛ le anyigba-tsitretsitsi ƒe didime si hiã, fafa, dodokpɔ ƒe elektrikŋusẽ kple ɣeyiɣi didi si wɔa dɔ nyuie nu.

Ðe APET si tsia afu nu lia?

Woate ŋu ana anti-fog grades alo coatings na chilled-food packaging applications tiatia aɖewo ne woɖo kpe dɔwɔwɔ kple ʋuʋu ƒe nudidiwo dzi vɔ.

Ðe ametakpɔnu ƒe film li?

Woate ŋu ana axa ɖeka alo axa eve takpɔnu masking na agbalẽ tiatia tiatia kple fabricated dɔwɔwɔwo.

Nukae nye nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake?

Nufiame suetɔ kekeake ƒe nudɔdɔ ƒe agbɔsɔsɔme anɔ abe 1000kg. Dzeside, amadede kple nutrenu siwo wowɔ ɖe ɖoɖo nu ate ŋu abia MOQ bubu.

Ðe APET ƒe kpɔɖeŋuwo lia?

A4 ƒe agbalẽ siwo li fifia kple kpɔɖeŋu siwo wotso ate ŋu anɔ anyi. Ate ŋu abia be woado ewɔwɔ ƒe titrime alo dɔwɔwɔ ƒe dzesi siwo wowɔ ɖe ɖoɖo nu.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Zi geɖe la, ewɔwɔ si sɔ la bia abe ŋkeke 7-15 ene le esi woɖo kpe eƒe nɔnɔme, kpɔɖeŋu, babla kple nusi wotsɔ de eme dzi vɔ megbe.

Nyatakaka kawoe hiã hafi woate ŋu ayɔ nyayɔyɔ?

Na eƒe titrime, didime, agbalẽ xatsaxatsa ƒe nɔnɔmewo, dzedzeme, anyigba, nusiwo wogbugbɔ zã, wɔwɔ ƒe ɖoɖo, dɔ tɔxɛwo, nudɔdɔ ƒe agbɔsɔsɔ, babla kple teƒe si woayi.

Na 1mm APET ƒe Agbalẽvi ƒe Nyayɔyɔ

Ku ɖe HSQY Plastic Group ŋu

HSQY Plastic Group naa APET agbalẽwo, PETG agbalẽwo, GAG agbalẽwo, PET babla filmwo, PVC agbalẽwo, PP agbalẽwo, CPET trays kple plastic nu siwo wowɔ ɖe ɖoɖo nu na dukɔwo dome B2B asisiwo.

HSQY doa alɔ thermoforming dɔwɔƒewo, nubablɛwo trɔlawo, agbalẽtalawo, ɖeɖefia wɔlawo, nuɖuɖu-babla wɔlawo, nusiwo wotsɔ tso duta vɛ kple mamalawo kple nusiwo woatsɔ awɔ tiatia, kpɔɖeŋuwo, wɔwɔ ɖe ɖoɖo nu, ŋkuléle ɖe nu ŋu kple wo tsɔtsɔ yi duta ƒe nubablɛwo.

Bia Nya Siwo Woagblɔ Kple Kpɔɖeŋu