Rigid pvc celuka plastic foam bord sheet fo furniture

PVC Celuka Fom Bod fɔ Fɛnichɔ ɛn Kabinɛt

HSQY PVC Celuka fom bod na wan rigid, laytwɛt fɔnicha panɛl wit wan smol, dense ɔda skin ɛn wan fom PVC kɔr. Dɛn mek am fɔ kichin kabinɛt, batrum vaniti, wodrɔb, shelf, patishɔn, intɛriɔ panɛl, displei ɛn ɔda aplikeshɔn dɛn we nid fɔ mek yu nɔ gɛt wata, izi fɔ mek am ɛn fɔ gɛt kɔnsistɛns finishing surface.

di standad tiknes rεnj we dεn sho fכ dis prodak na 1-20 mm. Standart sheet matirial saiz na 1220 × 2440 mm, wit ɔda saiz, dens, kɔlɔ ɛn finish we de ɔnda prodakshɔn rivyu. Fɔ fɔnicha prɔjek, pik di bod bay tik, dɛnsiti, skru-holdin rikwaymɛnt, span, lod, sɔfa tritmɛnt ɛn ɛnd-yuz ɛnvayrɔmɛnt—nɔto bay tiknes nɔmɔ.

PVC Celuka Fom Bod Vidio

Wetin Na PVC Sɛluka Fom Bɔd?

PVC Celuka fכm bod na wan εkspεnd rigid PVC sheet matirial we dεn mek so dat di sכfayz dεm go kol insay wan kכmparativ dense, smol skin we di insay de stil bi wan klos-sεl fכm kכr. Dis strɔkchɔ de gi di bod wan say we at fɔ wok pas di tipik fri-fom sayn bod ɛn i de mek Celuka gred bi prɛktikal opshɔn fɔ kabinɛt panɛl, fɔnicha kɔmpɔnɛnt ɛn intɛriɔ fabrikeshɔn.

Di bod kin saw, rout, drɔl, skru, engrav, laminated, peint, print ɛn bon we dɛn yuz kɔmpitabl tul, fastɛns, kɔtin ɛn adeziv. Faynal pefɔmɛns dipen pan di dɛnsiti, tiknɛs, fɔmyulashɔn ɛn fabrikeshɔn we dɛn dɔn pik, so dɛn fɔ tɛst prodakshɔn-rɛprɛzɛntiv sɛmpul dɛn bifo big ɔda.

PVC Celuka Fom Bod Spɛsifikeshɔn dɛn

Yuz di valyu dɛn we de dɔŋ ya as kot rɛfrɛns. Faynal dimɛnshɔn, tolɛreshɔn ɛn prɔpati dɛn fɔ rayt insay di aprɔv sampul, tɛnki data sheet matirial ɛn sɛl kɔntrakt fɔ di ɛksaktɔ gred we dɛn ɔda.

Tiknes not: Di standad rεnj fכ dis prodak na 1-20 mm. Rikwest dɛn we pas 20 mm dɛn kin trit dɛn lɛk kɔstɔm spɛsifikɛshɔn ɛn dɛn nid sɛpret kɔnfɔmeshɔn fɔ prodakshɔn fisibiliti, tolɛreshɔn, MOQ ɛn ɛnd-yuz pefɔmɛns.

Aw fɔ Pik PVC Sɛluka Bɔd fɔ Fɛnichɔ

Fɔnicha-grɛd sɛlɛkshɔn fɔ tink bɔt di kɔmpɔnɛnt we dɔn dɔn, nɔto jɔs di bɔd prays. Sheb wan drɔin ɔ sampul ɛnitɛm we i pɔsibul, mɔ fɔ kabinɛt domɔt, lɔng shelf, hinj zon ɛn pat dɛn wit kɔnsɛntret fastɛns lod.

PVC fom bod Fizik Prɔpati dɛn

Di valyu dɛn we de dɔŋ ya na di rɛfrɛns rɛnj dɛn we dɛn dɔn pablish fɔ dis prɔdak famili. Bikɔs di rizɔlt kin difrɛn bay di density, tiknes, fɔmyulashɔn, kɔlɔ ɛn tɛst we, aks fɔ di kɔrɛnt tɛknikal data sheet matirial ɛn aplikebul tɛst standad fɔ di ɛksaktɔ gred we dɛn kot.

Ki Ficha dɛn fɔ PVC Sɛluka Fom Bɔd

• Dens, smol Celuka skin fɔ mashin, lamin, peint ɛn kɔmpitabl printin.

• Fɔm kɔr de ridyus di wet we yu kɔmpia am wit sɔlid rigid PVC we gɛt di sem dimɛnshɔn.

• Lɔw pablish wata absɔpshɔn de sɔpɔt kabinɛt ɛn fɔnicha yus na humid indo ɛnvayrɔmɛnt we jɔyn ɛn hadwae dɛn disayn fayn fayn wan.

• Yu kin kɔt, rout, drɔ, engrav, fast ɛn bon yuz fayn tul ɛn kɔnsumabl.

• Tiknes, density, kala, saiz, surface ɛn pak kin tɔk bɔt fɔ kɔstɔm B2B ɔda.

• Nɔ de abop pan wud fayv, we de mek am prɛktikal mɔstɔ-rɛsistɛns ɔltɛrnativ fɔ sɛlɛkɛt MDF ɔ plai wud aplikeshɔn afta di prɔjek validɛshɔn.

Fabrikeshɔn ɛn Instɔlɛshɔn Gaydɛns

Aw Dɛn Fɔ Kɔt ɛn Rout PVC Sɛluka Bɔd?

Yuz shap kabayd-tip wudwok bled ɔ fayn CNC router bit, sɔpɔt di sheet matirial kɔrɛkt wan ɛn kɔntrol fid spid fɔ ridyus ɔt bildup ɛn edj chip. Gi dɔst ɛkstrakshɔn ɛn fala di tul ɛn wokples sefty instrɔkshɔn dɛn we de fɔ PVC mashin.

Aw Dɛn Fɔ Tɛst Skru ɛn Hinj dɛn?

Fastener pefomans dipen pan density, tiknes, payɔt-hol saiz, skru jɔyometri, edj distans ɛn lod dairekshɔn. Test di propɔz hinj ɛn skru sistem pan di aktual bod gred, mɔ fɔ domɔt, shelf ɛn ripit-lod fɔnicha kɔmpɔnɛnt dɛn.

Aw Dɛn Fɔ Aprɔv Peint, Laminate ɛn Adhesive Systems?

Klin di safa ɛn fala di kɔtin, laminat ɔ adhesive spɔlayt in rɛkɛmɔndeshɔn fɔ rigid PVC . Rɔn adheshon, ɔt, humiditi, klin ɛn ol tɛst pan wan prodakshɔn-rɛprɛzɛntiv sampul bifo mas fabrikeshɔn.

PVC Celuka Fom Bod Aplikeshɔn dɛn

Tipik aplikeshɔn dɛn na kichin ɛn batrum kabinɛt, vaniti, wodrɔb, shelf, fɔnicha panɛl, dɛkɔretiv patishɔn, intɛriɔ wɔl panɛl, ɛgzibishin displei, print sayn ɛn CNC-mashin kɔmpɔnɛnt dɛn. Fɔ yuz ɔdasay, strɔkchɔral, ay tɛmpracha, faya-rɛgyulayt ɔ kemikal fɔ yuz dɛn nid fɔ gɛt sɛpret aprɔv gred ɛn aplikeshɔn asɛsmɛnt.

Celuka Bod vs Fri-Fɔm ɛn Kɔ-Ɛkstrud PVC Bɔd

Nem ɛn kɔnstrɔkshɔn dɛn kin yuz difrɛn we akɔdin to di saplay dɛn. Kɔnfɛm di aktual krɔs-sekshɔn, dɛnsiti, sɔfa layt, tɛst data ɛn aprɔv sampul instead fɔ pik ɔl bay wan makɛt tɛm.

PVC fom bod Tɛst Ripɔt PDF

   Si di PVC fom bod SGS PDF

Dokumɛnt skɔp, di de we dɛn gi am, di sampul we dɛn tɛst ɛn di tɛst standad fɔ mach di prɔdak gred ɛn di dɛstineshɔn-maket rikwaymɛnt. Rikwest di ripɔt we de naw bifo yu mek ɔda.

Kwaliti ɛn Kɔmplians Dokumɛnt

Fɔ prokyumɛnt aprɔval, aks fɔ di kɔrɛnt tɛknikal data sheet matirial , sefty data sheet matirial , inspekshɔn ɔ sɛtifiket-ɔf-analysis fɔmat, kɔlɔ sampul, pak spɛsifikɛshɔn ɛn ɛni aplikeshɔn-spɛsifi k tɛst ripɔt. Faya, kemikal, it-kɔntakt, indo-emishɔn ɛn ɔda-weda klem fɔ gɛt sɔpɔt wit wan tɛst standad we gɛt nem ɛn wan dɔkyumɛnt we kɔba di gred we dɛn kot.

Mit HSQY na Intanɛshɔnal Ɛgzibishin dɛn

HSQY kin mit distribyushɔn, fɔnicha manifakta, fabricatɔ ɛn plastic-matirial bayer na intanashɔnal ɛgzibishin fɔ tɔk bɔt PVC fom bod spɛsifikɛshɔn, sampul, prɔsesin rikwaymɛnt ɛn ɛkspɔt prɔjek.

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt PVC Celuka Foam Board

Wetin Dɛn De Yuz PVC Sɛluka Fom Bɔd Fɔ?

Dɛn kin yuz am fɔ kichin kabinɛt, batrum vaniti, wodrɔb, fɔnicha panɛl, shelf, patishɔn, dɛkɔretiv panɛl, displei, sayn ɛn CNC-mashin intɛriɔ kɔmpɔnɛnt dɛn. Gret sɛlɛkshɔn fɔ mach di lod, fastɛns, finish ɛn savis ɛnvayrɔmɛnt.

Wetin Mek Celuka Bɔd Fayn fɔ Fɛnicha?

di Celuka prכsεs de mek wan kכmparativ dense, sכft skin oba wan layt wet fכm kכr. Dis de sɔpɔt mashin ɛn sɔfa finish we i de ridyus di wet. Fɔnicha suitability stil dipen pan density, tiknes, span, jɔyn dizayn ɛn hadwae tɛst.

Wetin Na di Difrɛns Bitwin PVC Sɛluka Bɔd ɛn Fri-Fɔm Bɔd?

Celuka bod jɔs gɛt wan dense ɛn at ɔda skin, we de mek i fayn fɔ fɔnicha ɛn panɛl dɛn we dɛn mek wit mashin. Fri-fom bod tipikli gɛt mɔ yunifom fom strɔkchɔ ɛn sɔft sɔfa ɛn bɔku tɛm dɛn kin pik am fɔ sayn ɛn laytwɛt displei wok.

Us Tik ɛn Densiti A Fɔ Pik?

di standad tiknes rεnj fכ dis prodak na 1-20 mm εn di pכblish dεnsiti rεnj na 0.35-1.0 g/cm³. di hכy dεnsiti kin impruv wok-sכfa εn fastεna pεrformεns bכt i kin inkrεs di wet εn kכst bak. Gi di kɔmpɔnɛnt drɔin, span, lod ɛn hadwae so dat dɛn go ebul fɔ evalyu di gred.

Yu tink se yu kin kɔstɔmayz di sayz, kɔlɔ ɛn sɔfays finish?

Yɛs. Yu kin tɔk bɔt di kɔstɔm dimɛnshɔn, kɔlɔ ɛn glos ɔ mat finish. Send di saiz we yu nid, tiknes, density, kala rɛfrɛns, sɔfa standad, protɛktiv-film nid, kwantiti ɛn aplikeshɔn fɔ wan fisibiliti ɛn MOQ rivyu.

Yu tink se PVC Celuka Fom Bod kin Hol Skru ɛn Hinj?

I kin fast, bɔt di trɛnk fɔ ol kin difrɛn wit di bod density ɛn tik, skru tayp, payɔt ol, edj distans ɛn lod dairekshɔn. Test di komplit skru ɔ hinj sistem na di kot bod bifo fɔnicha prodakshɔn.

Na PVC Celuka Bod Wata Pruf?

PVC Celuka bod gɛt smɔl wata absɔpshɔn ɛn i nɔ gɛt wud-fayba kɔr, so i fayn fɔ bɔku humid indo aplikeshɔn dɛn. Di kabinɛt we dɔn dɔn nɔ de mek wata pas fɔ insɛf: jɔyn dɛn, ol dɛn we dɛn dɔn drɔ, hadwae, adeziv ɛn instɔleshɔn ditil dɛn bak fɔ mek di wata we de na di wata.

Yu kin Yuz PVC fom bod na do?

Yuz na do nid fɔ kɔnfɔm wan UV-stabilized gred, ɛkspɛkt kɔlɔ chenj, tɛmal muvmɛnt, briz lod, fasten, drenaj ɛn savis layf. Standart fɔnicha gred nɔ fɔ ɔtomɛtik fɔ spɛsifa fɔ lɔng tɛm ɛkstirian ɛksplɔshɔn.

Na PVC Sɛluka Fom Bɔd Faya-Rɛtardant?

Faya pefɔmɛns na fɔmyulashɔn- ɛn tɛst-spɛsifi k. Stet di standad, retinj, tik ɛn dɛstineshɔn makɛt we dɛn nid, dɔn aks fɔ wan ripɔt we de naw we de kɔba di gred we dɛn kot. Wan stetmɛnt we dɛn nɔ tɔk bɔt fɔ kil insɛf nɔto fɔ tek ples fɔ wan klas we dɛn no bɔt faya.

Aw A Go Aks fɔ Sɛmpɛl ɛn Kot?

Send di aplikeshɔn, tiknes, density, sheet matirial saiz, kɔlɔ, finish, kwantiti, dɛstineshɔn pɔt ɛn tɛst dɛn we dɛn nid. Dɔn dɛn kin kɔnfyus di sampul we de ɛn di freyt. Tipik prodakshɔn lida tɛm na lɛk 15-20 dez afta dipɔsit, sɔbjɛkt to di fayn spɛsifikɛshɔn ɛn schedule.

Wetin Mek Yu Pik HSQY PVC Sɛluka Fom Bɔd?

HSQY de sɔpɔt B2B bayer dɛn wit kɔstɔm sheet matirial spɛsifikɛshɔn, sampul ɛvalueshɔn, ɔda kɔnfɔmeshɔn, prodakshɔn inspekshɔn ɛn ɛkspɔt pak. Fɔ mek yu gɛt kɔrɛkt prɔpɔzal, gi di aplikeshɔn we dɔn dɔn pas fɔ jɔs gi di bɔd saiz so dat di tim go ebul fɔ rivyu di density, surface, mashining, hardware ɛn documentation rikwaymɛnt dɛn togɛda.