Nnuruyɛ PVC Blister Film

Nnuruyɛ PVC Blister Film Ɔyɛfo & Ɔde Ma

HSQY Plastic yɛ na ɛde nnuru PVC blister film ne laminated nnuru a wɔde kyekyere nneɛma ho films a wɔde yɛ tablets, capsules, pills, suppositories, nutraceuticals, mmoa ho nneɛma ne nnuruyɛ mu nneɛma afoforo a ɛfata ma.

Yɛn nnuruyɛ-sini ahorow no bi ne PVC sini a ɛyɛ den, PVC / PVDC sini, PVC /PE sini ne PVC / PVDC /PE sini a wɔabom ayɛ . Wobetumi de tinted ne opaque grades a ɛda adi pefee ama a wɔayɛ no sɛnea wɔpɛ, slit trɛw, roll diameter, core size, winding nhyehyɛe ne akwanside nhyehyɛe sɛnea blister-packaging ahwehwɛde ahorow te.

Ɛsɛ sɛ wɔpaw nnuru a wɔde yɛ akisikuru sɛ nneɛma a wɔde kyekyere nneɛma nyinaa no fã. Aduru no nsuo, oxygen ne hann a ɛte nka, botaeɛ shelf nkwa nna, nkyekyɛmu wim tebea, blister cavity geometry, forming afiri, aluminium lidding foil ne sealing tebea nyinaa nya nneɛma a etwa to a wɔpaw.

Sɛ woreyɛ anaa woresesa nnuruyɛ mu blister film a, fa wo mprempren nkyerɛkyerɛmu, film no mu duru, wɛb trɛw, mfiri no mfonini, cavity depth, akwanside ahwehwɛde ne afe afe a wode di dwuma no mena HSQY. Yɛn kuw no betumi aboa ma wɔahu nneɛma a ɛfata a wɔde bɛyɛ nhwɛsode ne blister-line nhwehwɛmu.

Dɛn Ne Nnuruyɛ PVC Blister Film?

Nnuru PVC akisikuru film taa yɛ PVC a ɛyɛ den a ɛnyɛ plastic a wɔde yɛ wɛb a wɔde yɛ abura wɔ nnuru a wɔde ayɛ akisikuru a wɔde ɔhyew ayɛ mu. Bere a wɔrekyekyere no, wɔma PVC sini no yɛ hyew, wɔyɛ no ntokuru, de aduru a wɔde hyɛ mu anaasɛ aduru a wɔde kata so hyɛ mu ma na wɔde kata nnuru a wɔde kata so a ɛne no hyia mu, a mpɛn pii no wɔde ɔhyew-nsɔano-lacquered aluminum foil.

Wɔde plain rigid PVC di dwuma kɛse efisɛ ɛma nea ɛda adi yiye, thermoforming adwumayɛ a wɔde asi hɔ, rigidity a mfaso wɔ so ne nneɛma a wɔde kyekyere nneɛma ho ka a ɛho ka sua koraa. Nanso, gyinapɛn PVC mma nsu ne oxygen akwanside koro no ara te sɛ nnuru a wɔde akata so anaasɛ wɔayɛ no laminated.

Enti nnuru a ɛyɛ nsuo, oxygen a ɛyɛ mmerɛw anaa nsuo a ɛma nsuo kɔ mu kɛseɛ no betumi ahia PVC / PVDC , PVC / PVDC /PE, PCTFE-based laminate, cold-form aluminium anaa foforɔ a ɛwɔ akwansideɛ a ɛkorɔn. Ɛsɛ sɛ wɔde stability studies ne packaging validation boa paw a etwa to.

Nnuruyɛ PVC Film Product Range

HSQY de nnuru a wɔde yɛ-sini nhyehyɛe ahorow pii ma ma dodow ahorow, abura nhyehyɛe ne akwanside ahwehwɛde ahorow.

Nnuruyɛ PVC Blister Film Nkyerɛkyerɛmu

HSQY de nnuru sini mmusua pii a ɛsono ne kɛse, wɛb-trɛw ne roll nhyehyɛe ahorow ma. Nneɛma a edidi so yi bɔ nneɛma a wɔtaa paw sɛ wɔde ma no mua. Ɛsɛ sɛ wosi nsɛm a etwa to a wɔakyerɛkyerɛ mu no so dua bere nyinaa ma abasobɔde a wɔapaw no.

Ɛsɛ sɛ wɔtɔ nnuru a wɔde yɛ blister film a ɛne nea wɔapene so no nhyia. Ɛsɛ sɛ wɔkyerɛkyerɛ thickness tolerance, slit trɛw, roll diameter, core, winding direction, splices a wɔma ho kwan, kɔla, coating weight, appearance criteria ne quality nkrataa a wɔhwehwɛ mu ansa na wɔayɛ aguadi.

PVC ne PVC / PVDC ne PVC / PVDC /PE

Ɛnyɛ nea ɛkyerɛ sɛ nnuru a wɔde yɛ akisikuru sini a eye sen biara ne ade a akwanside a ɛkorɔn sen biara wom. Nhyehyɛe a ɛteɛ no ma ahobammɔ a ɛdɔɔso a ɛbɛma wɔadi ade no nkwa nna a wɔagye atom no ho dwuma bere a ɛkura adwumayɛ a ɛfata a wɔde yɛ adwuma ne ɛka a wɔbɔ wɔ nneɛma a wɔde kyekyere nneɛma nyinaa ho no mu.

Sɛnea Nnuru a Wɔde Blister Packaging Yɛ Adwuma

1. Film Unwinding: Wɔbue nnuru a wɔde yɛ ntaban no wɔ nhyɛso a wɔahyɛ so ase.

2. Ɔhyew: Sini no fa ɔhyew fã bi a wɔahyɛ so kosi sɛ ebedu tebea a wɔhwehwɛ sɛ ɛyɛ no mu.

3. Thermoforming: Vacuum, pressure, plug assistance anaa nea wɔaka abom na ɛma blister cavities no ba.

4. Product Filling: Wɔde tablets, capsules anaa nnuru afoforo a wɔapene so a wɔde ma no gu abura a wɔayɛ no mu.

5. Lidding Application: Wɔde nnuru a wɔde kata so a ɛne no hyia si blister web no so.

6. Ɔhyew a Wɔde Sie: Ɔhyew, nhyɛso ne bere a wɔde tra hɔ no ma lidding foil no ɔhyew-nsɔano lacquer no yɛ adwuma.

7. Nhwehwɛmu ne Coding: Wɔhwɛ sɛnea nneɛma no wɔ hɔ, nsɛm a wɔatintim ne nneɛma a wɔde ahyɛ mu no su.

8. Punching: Wɔtwa wɛb a ɛkɔ so no mu ma ɛyɛ blister cards a wɔawie.

PVC sini no nko ara nkyerɛ paket adwumayɛ a etwa to. Blister a wɔawie no yɛ forming web, cavity geometry, dosage form, lidding material, sealing system ne secondary packaging.

Thermoforming Adwumayɛ ne Mfiri a ɛne ne ho hyia

Nneɛma a ɛyɛ den a ɛkɔ so daa, shrinkage a wɔahyɛ so, winding a ɛyɛ pɛ ne slitting a ɛyɛ pɛpɛɛpɛ ho hia ma nnuru a wɔde kyekyere nneɛma. Nsonsonoe a ɛwɔ sini no mu no betumi de wɛb tracking, cavity formation, registration, sealing ne punching haw ahorow aba.

Sɛ wɔrebisa nhwɛsode nneɛma a, ɛsɛ sɛ adetɔfo de blister-machine manufacturer ne model, forming nhyehyɛe, web trɛw, line ahoɔhare, ɔhyew nhyehyɛe, cavity bun, indexing tenten, forming akwankyerɛ ne maximum roll dimensions ma.

Dɛn na Ɛsɛ sɛ Wɔhwɛ Bere a Wɔreyɛ Blister-Line Sɔhwɛ?

• Roll unwinding ne wɛb tracking

• Film nhyɛso a ɛyɛ den

• Ɔhyew a ɛyɛ pɛ wɔ wɛb no nyinaa so

• Cavity nkyerɛase ne ntwea so nhyehyɛe

• Ɔfasu-thickness kyekyɛ bere a wɔayɛ no akyi

• Film shrinkage ne dinkyerɛw

• Fitaa, adwennwen agyiraehyɛde, ahurututu anaa pinholes

• Flange flatness ansa na wɔahyɛ no agyirae

• Ɔhyew-nsɔano a ɛkɔ so daa

• Punching pɛpɛɛpɛ ne anoano a wɔawie

Nnuruyɛ Aluminium Lidding Foil a ɛne ne ho hyia

Wɔtaa de akisikuru a ɛyɛ den PVC blister film no kata nnuru a wɔde piapia mu aluminum foil a wɔde heat-seal lacquer a ɛne no hyia akata so. Nsɔano a wotumi de ho to so no gyina nneɛma ne nneɛma a wɔde kyekyere nneɛma-afiri tebea nyinaa so.

Ansa na wɔbɛpene so wɔ aguadi mu no, ɛsɛ sɛ adetɔfo hwehwɛ sɛnea wɔyɛ film ne aluminium foil a wɔaka abom pɛpɛɛpɛ no mu wɔ ɔhyew a wɔahyɛ sɛ wɔde bɛsɔ ano, nhyɛso ne bere a wɔde bɛtra hɔ no ase.

• Nsɔano ahoɔden

• Nsɔano a ɛyɛ pɛ

• Channel leakage a ɛretu

• Lacquer a ɛne ne ho hyia

• Foil delamination a wɔde yɛ adwuma

• Push-through adwumayɛ

• Storage ne stability adwumayɛ

Mmofra-a ɛko tia, mpanyimfo adamfofa ne nsakrae-da adi adwumayɛ yɛ nneɛma a ɛwɔ pakete nhyehyɛe a wɔasɔ ahwɛ a edi mũ no mu na ɛnsɛ sɛ wɔde to PVC sini nkutoo so.

Akwanside Ahwehwɛde ne Nnuru Bere a Wɔde Siesie

Ɛsɛ sɛ nnuru a wɔde kyekyere nnuru no bɔ aduru no ho ban wɔ bere a wɔapene so sɛ ɛbɛkora so no mu. Akwanside adwumayɛ a wɔhwehwɛ no gyina nnuru a wɔde yɛ, tablet a wɔde kata so, capsule shell, blister cavity kɛse, film nhyehyɛe, wim tebea, nea ɛto so abien a wɔde kyekyere ne kyekyɛ tebea horow so.

Nsɛmmisa a Ɛsɛ sɛ Wobua Ansa na Woapaw Blister Film no

• So ade no te nka sɛ nsu a ɛwɔ mu no te?

• So ade no tumi te oxygen nka?

• So ade no tumi te hann nka?

• Dɛn ne bere tenten a wɔhwehwɛ sɛ wɔde yɛ nneɛma no?

• Wim tebea bɛn na wɔbɛkyekyɛ ade no wɔ?

• Dɛn ne abura no mu dɔ ne akisikuru no ani?

• So wɔde akwanside a ɛto so abien a wɔde kyekyere nneɛma bedi dwuma?

• Akwanside ho nsɛm bɛn na ɛwɔ hɔ fi pack a ɛwɔ hɔ dedaw no mu?

Akwanside gyinapɛn ahorow a wɔsusuw wɔ flat film so no ho wɔ mfaso ma nneɛma a wɔde yiyi nneɛma mu, nanso thermoforming trɛw nneɛma no mu na ɛma ɛyɛ teateaa. Enti ɛsɛ sɛ wɔde blister nhyehyɛe a wɔayɛ ankasa no di dwuma de di paket ahobammɔ a etwa to no ho adanse.

PVDC Coating Weight ne Akwanside a Wɔpaw

PVC / PVDC nnuruyɛ sini de PVC a ɛyɛ den di dwuma sɛ thermoforming substrate ne PVDC a wɔahyɛ so a wɔde kata so de ma nsuo, oxygen ne hua a wɔde kɔ nipadua mu no tumi ko tia no tu mpɔn.

PVDC coating weights ahorow betumi ama akwanside ahorow ahorow aba. Nnwuma nhyehyeɛ a wɔtaa yɛ no betumi ayɛ bɛyɛ 40, 60, 90 anaa 120 g/m2, nanso ɛsɛ sɛ wɔsi so dua bere nyinaa sɛ ɛwɔ hɔ ne nea etwa toɔ a wɔpaw no de toto HSQY grade pɔtee no ho.

Ɛnsɛ sɛ wɔpaw ade a wɔde kata so no mu duru a ɛkorɔn no ara kwa. PVDC level a wɔhwehwɛ no gyina nnubɔne ho nkate, cavity geometry, forming draw, wim tebea, shelf-life botae ne ankasa stability data so.

Nnuruyɛ PVC Film a Wɔde Di Dwuma

• Tablet Blister Packs: Unit-dose packaging ma tablets a wɔahyɛ no den a ɛfata.

• Hard Capsule Blisters: Nneɛma a wɔde kyekyere nneɛma a ɛda adi anaasɛ ɛyɛ akwanside ma capsules a ɛyɛ den.

• Soft Capsule Blisters: Sini nhyehyɛe a wɔapaw bere a wɔayɛ nea ɛne ne ho hyia ne sɛnea ɛgyina pintinn ho nhwehwɛmu akyi.

• Nutraceutical Packaging: Vitamins, aduannuru a wɔde ka ho ne nneɛma a ɛfa ho a wɔde unit-dose di dwuma.

• Mmoa Ho Nneɛma: Nnuru a wɔde yɛ nnuru ne nnuru a wɔde hyɛ mmoawa mu a ɛfata ma mmoa nnuruyɛ nhyehyɛe ahorow.

• Clinical Trial Packs: Wɔapaw sample-dose ne clinical-study blister formats.

• Suppository Packaging: Specialized PVC /PE anaasɛ multilayer nhyehyɛe sɛnea nneɛma a wɔhwehwɛ te.

• Akwahosan Ho Nneɛma a Wɔapaw: Akwahosan ho nneɛma a ɛnyɛ sterile ne nneɛma a wɔde hwehwɛ yare mu wɔ ahwehwɛde pɔtee a wɔde di dwuma akyi.

Ɛnsɛ sɛ wɔka standard pharmaceutical PVC blister film ho asɛm ara kwa sɛ ɛyɛ akwanside a ɛnyɛ sterile. Sterile aduruyɛ-mfiri a wɔde kyekyere nneɛma hwehwɛ nneɛma pɔtee bi, nsɔano-nhyehyɛe, sterilization ne microbial-barrier validation.

Nnuru a Ɛda Hɔ, Bruu, Amber ne Opaque PVC Film

Wobetumi de HSQY nnuru PVC sini ahorow ama wɔ sɛnea ɛte ahorow mu sɛnea nneɛma a wɔde kyerɛ ne nea wɔde kyekyere-nsusuwii ahwehwɛde ahorow te.

Kɔla a wotumi hu nkutoo nkyerɛ sɛ ɛyɛ hann ho banbɔ a ɛfata. Nnuru a ɛma hann te hwehwɛ spectral-transmission ahwehwɛde ahorow a wɔakyerɛkyerɛ mu ne nea ɛboa stability evaluation.

Nnuruyɛ PVC Blister Film

Nnuruyɛ titiriw a wɔde kyekyere nneɛma hwehwɛ sɛ wɔkyerɛw nsɛm a wɔahyɛ so, wɔakyerɛw ne yɛ ne batch traceability. Sɔhwɛ gyina nneɛma nhyehyɛe ne adetɔfo nsɛm a wɔapene so so.

Nnuruyɛ ho Mmara ne Nneɛma a Ɛyɛ Pa Ho Nwoma

Adansedie krataa baako biara nni hɔ a ɛma PVC blister film baako a ɛfata ma aduru biara ne gua biara. Nwoma a wɔhwehwɛ no gyina tumidi a ɛwɔ baabi a wɔrekɔ, dodow a wɔde ma, nnuru ho krataa ne nneɛma a wɔde kyekyere nneɛma ho nkyerɛkyerɛmu so.

Ɛgyina HSQY abasobɔdeɛ a wɔapaw ne adetɔfoɔ ahwehwɛdeɛ so no, nkrataa bɛtumi ayɛ:

• Certificate of Analysis ma nnwuma a wɔyɛ no akuw

• Mfiridwuma ho Nsɛm Krataa

• Nneɛma a wɔahyehyɛ ho nsɛm

• Mpaemuka a ɛkyerɛ sɛ nea ɛne no hyia wɔ baabi a ɛfata

• Pharmacopoeial sɔhwɛ ho nsɛm a ɛfata

• Tukɔ, nneɛma a wotumi yi fi mu anaa nnuru-ahobammɔ ho nsɛm wɔ baabi a ɛfata

• WVTR, OTR anaasɛ coating-weight data ma akwanside nhyehyɛe

• Manufacturing-site ne quality-management ho nsɛm

• Batch traceability ho nsɛm

• Nsakrae-hwɛ mmoa a egyina aguadi apam so

• Mmara kwan so mmoa nkrataa a ɛgyina nneɛma a wɔyɛ ne gua so ahwehwɛdeɛ so

Ɛsɛ sɛ adetɔfo hu gua a wɔrekɔ ne dossier mmoa a wɔhwehwɛ ansa na wɔakra. Amanneɛbɔ a ɛfa nneɛma nyinaa ho te sɛ ISO, REACH, RoHS anaa SGS nkrataa no ankasa nsi nnuru a ɛne ne ho hyia, ɛyɛ den ne primary-packaging qualification ananmu.

Nnuruyɛ mu Blister Film Ɔhaw a Ɛtaa Ba

Nnuruyɛ PVC Film Roll Ahwehwɛde

Nhama a ɛyɛ blister a ɛyɛ adwuma ankasa no hwehwɛ pii sen ne kɛse a ɛfata. Roll geometry ne winding quality nya adwumayɛ mu mmɔdenbɔ so nkɛntɛnso tẽẽ.

• Pɛpɛɛpɛ slit trɛw ne trɛw tolerance

• Core mu diameter

• Nsɛm titiriw

• Maximum roll abɔnten diameter

• Maximum roll mu duru

• Winding akwankyerɛ

• Coated-side orientation ma multilayer sini ahorow

• Roll hardness ne winding nhyɛso

• Maximum dodow a wogye tom a ɛyɛ splices

• Roll ne batch-label ahwehwɛde ahorow

Nnuru PVC Nnuru a Wɔde Siesie ne Nea Wɔde Di Dwuma

• Fa nhoma mmobɔwee no sie nea wɔde ahyɛ mu a edi kan a ɛbɔ ho ban no mu kosi sɛ ɛho behia sɛ wɔyɛ.

• Fa sie wɔ adekoradan a ɛho tew, ɛhɔ yɛ kusuu na wɔhwɛ so.

• Bɔ film ho ban fi owia hann tẽẽ, nsu, mfutuma ne hua a ano yɛ den ho.

• Kwati sɛ wode nnuru a ɛma nneɛma sɛe anaa nneɛma a ɛde efĩ ba bɛka ho.

• Boa nhoma mmobɔwee sɛnea wɔayɛ no sɛnea wɔde ahyɛ mu no na amma anoano ansɛe.

• Mma ntwe nhoma mmobɔwee nkɔ fam anaasɛ mfa anoano a entumi nnyina sini no nni dwuma.

• Di nyansahyɛ ahorow a wɔapene so sɛ wɔbɛkora so ne sɛnea wɔde siesie ade ma adesuakuw a wɔapaw no akyi.

Nneɛma a Wɔde Gu Nneɛma Mu ne Nneɛma a Wɔde Kɔ Amannɔne

Wɔtaa de nnuru PVC sini ma wɔ nhoma mmobɔwee a wɔde ahwɛyiye akuru mu a wɔde nneɛma a ɛbɔ ho ban a ɛfata ma mfiridwuma mu di ne amanaman ntam nneɛma a wɔde mena.

• Ahobammɔ PE sini a wɔde kyekyere nneɛma ho

• Kraft-krataa ahobammɔ

• Roll-end ahobammɔ

• Batch ne roll ho nkyerɛkyerɛmu

• Export pallet a wɔde ahyɛ mu

• Customized roll mu duru

• Pallet nsusuwii a wɔayɛ no sɛnea wɔpɛ

• Nsiesiei a wɔde bɛhyɛ nsukorade mu

Dɛn Nti na Wopaw HSQY sɛ Wo Nnuru PVC Film Supplier?

• Nnuruyɛ Nhyehyɛeɛ Ahodoɔ: Rigid PVC , PVC / PVDC , PVC /PE ne PVC / PVDC /PE a wɔpaw.

• Custom Film Thickness: Wobetumi de nnuru a wɔde yɛ sini ho nsɛm a ɛfa nneɛma a wɔde kyekyere nneɛma ho ahyia.

• Custom Slitting: Wobetumi de roll trɛw ne blister-machine wɛb ahwehwɛde ahorow ahyia.

• Custom Roll Configuration: Wobetumi aka Core, roll diameter, roll mu duru ne winding akwankyerɛ ho asɛm.

• Akwanside a Wɔpaw: Standard PVC ne PVDC -coated higher-barrier solutions wɔ hɔ.

• Kɔla Nkɔso: Nnuru-film a emu da hɔ, tinted ne opaque options.

• Nhwɛso ne Trial-Roll Mmoa: Wobetumi asusuw nneɛma ho wɔ adetɔfo no blister line so ansa na wɔapene so wɔ aguadi mu.

• Quality Documentation: Wobetumi de product ne batch nkrataa ama sɛnea grade ne apam a wɔasi so dua te.

• B2B Export Supply: Bulk roll ne pallet a wɔde ma ma nnuru a wɔde kyekyere nneɛma ho adetɔfo wɔ wiase nyinaa.

Nsɛm Bɛn na Ɛsɛ sɛ Wɔde Ka Wo RFQ Ho?

RFQ a ɛkɔ akyiri ma HSQY tumi kamfo nnuru a wɔde yɛ akisikuru ho nsɛm kyerɛ na wɔka asɛm ka pɛpɛɛpɛ.

1. Dosage kwan: tablet, capsule, suppository anaa ade foforo

2. Nnuru a ɛma nsuo, oxygen ne hann te nka

3. Mprempren packaging-film nhyehyɛe

4. PVC a ɛyɛ den

5. PVDC coating weight wɔ baabi a ɛfata

6. Film trɛw ne abodwokyɛre

7. Core mu diameter

8. Maximum roll diameter ne roll mu duru

9. Blister-mfiri yɛfo ne ne mfonini

10. Forming nhyehyɛe ne line ahoɔhare

11. Cavity nsusuwii ne twetwe bun

12. Blister-kaad nhyehyɛe

13. Lidding foil ne ɔhyew-nsɔano lacquer nkyerɛkyerɛmu

14. Akwanside anaasɛ gyinabea botae a wɔhwehwɛ

15. Kɔla ne opacity ahwehwɛde ahorow

16. Destination mmara gua so

17. Mfiridwuma ne mmara ho nkrataa a wɔhwehwɛ

18. Sɔhwɛ dodow

19. Commercial order dodow ne afe afe ahwehwɛde

20. Nneɛma a wɔde kyekyere nneɛma ne nea wɔde kɔma ho ahwehwɛde ahorow

Nsɛm a Wɔtaa Bisa Fa Nnuruyɛ PVC Sini Ho

Dɛn ne nnuru PVC blister film?

Nnuru PVC blister film yɛ rigid forming web a wɔde yɛ thermoform cavities ma tablets, capsules ne afoforo a ɛfata unit-dose nnuru. Mpɛn pii no, wɔde aduru a wɔde kata so a ɛne no hyia na ɛkata sini a wɔayɛ no so.

PVC a ɛyɛ den bɛn na wɔde yɛ nnuru a wɔde hyɛ akisikuru mu?

Bɛyɛ 0.20–0.30 mm na ɛtaa ba wɔ nnuru a ɛyɛ katee PVC nnuru a wɔde yɛ akisikuru pii mu. HSQY nnuruyɛ film ahorow no trɛw bɛyɛ 0.13 mm kosi 0.50 mm a egyina nhyehyɛe a wɔapaw no so.

So wɔtaa de 250 micron PVC yɛ nnuru a wɔde yɛ akisikuru?

Aane. Bɛyɛ 250 micron yɛ reference thickness a wɔtaa de di dwuma ma rigid pharmaceutical PVC , nanso ɛsɛ sɛ wɔpaw gauge a ɛfata sɛnea cavity geometry, blister tooling, dosage form ne validated machine tebea horow te.

Nsonsonoe bɛn na ɛwɔ PVC ne PVC / PVDC ntam ?

Plain rigid PVC ma thermoforming pa ne pefeeyɛ nanso ɛyɛ mfitiaseɛ nsuo ne oxygen akwanside. PVC / PVDC de PVDC ade a ɛkata so a ɛma nneɛma a atwa yɛn ho ahyia akwanside tu mpɔn bere a ɛkura PVC a ɛyɛ substrate no mu.

Dɛn ne PVC / PVDC /PE nnuruyɛ sini?

PVC / PVDC /PE yɛ nnuru a wɔde yɛ sini nhyehyɛe a ɛwɔ ntoatoaso pii a ɛka PVC nnyinaso ne akwanside ne dwumadi ntoatoaso bom. Wobetumi de adi dwuma ama nneɛma a wɔapaw a ɛhwehwɛ sɛ wɔma akwanside anaasɛ adwumayɛ titiriw a wɔde yɛ nneɛma.

So plain PVC yɛ nnuru a wɔde yɛ nnuru a akwanside kɛse wom?

Dabi, plain rigid PVC ma nneɛma a atwa yɛn ho ahyia ho ahobammɔ titiriw nanso mpɛn pii no ɛnsɛ sɛ wɔkyekyɛ mu sɛ ade a ɛmma nsu anaa oxygen a ɛmma nsu nkɔ mu kɛse. Nneɛma a ɛyɛ mmerɛw betumi ahwehwɛ sɛ wɔde PVDC -coated, PCTFE-based anaa aluminium-based structures.

Mɛyɛ dɛn apaw PVDC coating weight a ɛfata?

PVDC coating ɛsɛ sɛ wɔpaw sɛnea nnuru no nkate, shelf nkwa, wim tebea, blister geometry, forming draw ne target nsuo anaa oxygen akwanside. Ɛsɛ sɛ sɔhwɛ a wɔde gyina pintinn so si nhyehyɛe a etwa to no so dua.

So wobetumi de nnuru PVC sini ahyɛ aluminium foil mu?

Aane. Wɔtaa de ɔhyew kata rigid PVC blister film so wɔ nnuruyɛ mu aluminium a wɔde kata so a ɛwɔ heat-seal lacquer a ɛne no hyia mu. Ɛsɛ sɛ wɔbom di foil, lacquer ne sealing tebea horow no pɛpɛɛpɛ.

Nnuru PVC sini no kɔla bɛn na ɛwɔ hɔ?

Nneɛma a wubetumi apaw no betumi ayɛ kɔla ahorow a emu da hɔ, ɛyɛ bruu, fitaa, amber, kɔkɔɔ, ahabammono, kɔkɔɔ ne kɔla ahorow a wɔayɛ no sɛnea wɔpɛ. Ɛsɛ sɛ kɔla ne opacity fata ma nnuru a wɔde kyekyere nneɛma a wɔapaw no.

So amber anaa kɔla PVC bɔ nnuru a hann nka ho ban?

Nneɛma a ɛwɔ kɔla anaa nea ɛnyɛ hann betumi atew hann a ɛkɔ so no so, nanso kɔla a wotumi hu nkutoo nkyerɛ sɛ ɛbɔ hann ho ban sɛnea ɛsɛ. Ɛsɛ sɛ wɔkyerɛkyerɛ spectral adwumayɛ a wɔhwehwɛ mu na wɔdi ho adanse denam sɔhwɛ a ɛfata ne stability nhwehwɛmu so.

So nnuruyɛ PVC sini no tumi gyina mmofra ano?

PVC sini a wɔhyehyɛ nkutoo nyɛ nea mmofra betumi agyina ano. Mmofra a wɔko tia no gyina blister package nhyehyɛe a edi mũ, lidding nhyehyɛe, ano bue mechanism ne applied finished-package sɔhwɛ.

So nnuru a wɔde yɛ PVC blister film no yɛ nea ɛyɛ sterile?

Standard pharmaceutical blister film no nyɛ nea wɔde ma ara kwa sɛ sterile. Sterile packaging applications hwehwɛ nneɛma ne packaging nhyehyɛe pɔtee a wɔayɛ na wɔagye atom ama sterilization ne sterile-barrier ahwehwɛde ahorow a wɔahyɛ da ayɛ no.

Dɛn na ɛma akisikuru no ntumi nkɔ yiye?

Nea ebetumi de aba ne ɔhyew a ɛnnɔɔso, ɔhyew a ɛnteɛ, vacuum anaa mframa a wɔahyɛ no den a ɛnyɛ papa, abura no mu dɔ dodo, nsunsu mu mframa a wɔasiw, film no mu duru a ɛmfata, wɛb tension a entumi nnyina anaasɛ forming-film grade a ɛnteɛ.

Ɔkwan bɛn so na wɔsɔ nnuru PVC sini hwɛ?

Ɛgyina nkyerɛkyerɛmu no so no, sɔhwɛ ahorow no betumi ayɛ nneɛma no nipasu, ne kɛse, ne tɛtrɛtɛ, nea wohu no yiye, kɔla, ahum, ɔhyew a ɛtwetwe, sɛnea ɛyɛ adwuma, mfiri su, akwanside a wɔde fa so, PVDC ade a wɔde kata so mu duru, nsɔano a ɛne ne ho hyia, atutra ne nnuru-ahobammɔ ahwehwɛde afoforo.

So ISO 9001 di adanse sɛ PVC sini fata ma nnuru a wɔde kyekyere nneɛma?

Dabi ISO 9001 fa nhyehyɛe ahorow a wɔde hwɛ nneɛma pa so ho. Nnuruyɛ mu mfitiaseɛ-packaging fata nso hwehwɛ sɛ wɔhwɛ nneɛma ho nkyerɛkyerɛmu, ahobanbɔ ne nhyiamu ho nsɛm, adwumayɛ sɔhwɛ, gyinabea nhwehwɛmu ne destination-market nkrataa.

So wobetumi ayɛ nnuru a wɔde yɛ blister film no sɛnea wɔpɛ?

Aane. HSQY betumi asusuw sini nhyehyɛe a wɔayɛ no sɛnea wɔpɛ, ne kɛse, PVDC coating, slit trɛw, roll diameter, core, winding akwankyerɛ, kɔla ne packaging sɛnea mfiridwuma ahwehwɛde ne order dodow te ho asɛm.

Dɛn ne MOQ ma nnuruyɛ PVC sini?

HSQY nnuruyɛ sini nkyerɛkyerɛmu pii wɔ MOQ a ɛtaa ba a ɛbɛyɛ 1000–2000 kg. Amanneɛbɔ a ɛyɛ den, kɔla soronko, PVDC coating weights ne documentation ahwehwɛde betumi ama MOQ soronko aba.

So metumi abisa sɛ wɔmfa sɔhwɛ nhoma bi mma ansa na makra nneɛma pii?

Wobetumi asusuw sɔhwɛ nsɛm ho ama nnwuma a ɛfata. Ɛsɛ sɛ wɔn a wɔtɔ nnuru no hwehwɛ sini foforo a ɛwɔ afiri a ɛma akisikuru ankasa no so hwɛ sɛnea ɛyɛ, di akyi, wɔsɔ ano, wɔbɔ akuturuku ne sɛnea wɔde nneɛma a wɔawie no yɛ adwuma ansa na wɔapene so wɔ aguadi mu.

Nsɛm bɛn na wɔhwehwɛ ma nnuruyɛ PVC sini mu asɛm a wɔafa aka?

Fa sini nhyehyɛe, ne kɛse, ne trɛw, ne mu, ne kɛse, ne ntwemu, PVDC nea wɔde kata so no mu duru sɛ ɛfata a, kɔla, blister-machine model, cavity depth, lidding foil, mmara kwan so gua, nkrataa a wɔhwehwɛ, sɔhwɛ dodow ne afe afe ahwehwɛde a wɔasusuw ma.

Bisa Nnuruyɛ PVC Blister Film Nhwɛsode ne Bo

HSQY de nnuru a ɛyɛ katee PVC ne akwanside a ɛkorɔn sini ahorow a ɛyɛ nnuru ma nnuru a wɔde kyekyere nneɛma, wɔn a wɔyɛ nnuru a wɔde kyekyere nneɛma ho, wɔn a wɔyɛ nnuru, wɔn a wɔkyekyɛ ne wɔn a wɔsakra nnuru wɔ wiase nyinaa.

Sɛ́ ebia mprempren wode 250 micron rigid PVC , PVC / PVDC anaa nnuruyɛ nhyehyɛe a ɛwɔ ntoatoaso pii redi dwuma no, HSQY betumi ahwɛ wo mfiridwuma ho nkyerɛkyerɛmu no mu na ama nneɛma a ɛfata a wobɛpaw ama sɔhwɛ.

Fa wo mprempren specification, blister-machine ho nsɛm ne afe afe volume mena yɛn na yɛabisa mfiridwuma ho data, sɔhwɛ nneɛma, packaging ho nsɛm ne bulk bo.