PVC Grey Board Krataa a Wɔde Di Dwuma

Dɛn Ne Rigid Grey PVC Krataa?

yɛ PVC krataa a ɛyɛ fitaa a ɛyɛ den thermoplastic board a ɛyɛ den a wɔde polyvinyl chloride resin, stabilizers, pigments ne application-specific additives na ɛyɛ. Wɔtaa ka ho asɛm nso sɛ PVC board a ɛyɛ fitaa, mfiridwuma mu PVC krataa, PVC krataa a ɛyɛ den anaa PVC plastic panel a ɛyɛ den.

PVC nkrataa a ɛyɛ den a ɛyɛ fitaa no ka mfiridwuma ahoɔden a mfaso wɔ so, nsu a ɛba fam a ɛtwetwe, anyinam ahoɔden a ɛbɔ ne nea ɛko tia acid, alkalis ne mfiridwuma mu nnuru pii bom. Wobetumi atwitwa, atutu, afa kwan so, ayɛ mfiri, ayɛ weld, ayɛ thermoformed na wɔayɛ no mfiridwuma mu nneɛma.

HSQY de PVC nkratafa a ɛyɛ fitaa a ɛyɛ ɔbaabun ne nea wɔasan de adi dwuma a wɔde yɛ nnuru a wɔde yɛ adwuma, adansi panels, nkyerɛwee, dawurubɔ, nsuo a wɔde yɛ adwuma, mfiri afã horow, tank linings, laboratory nnwinnade ne anyinam ahoɔden dwumadie ma.

So PVC Grey Board ne Krataa Greyboard yɛ ade koro?

Dabi, Industrial PVC grey board ne krataa greyboard yɛ nneɛma abien a ɛsono emu biara.

HSQY PVC grey board nneɛma a ɛwɔ saa ɔfã yi mu yɛ plastic nkratafa a ɛyɛ den. Ɛnyɛ nkrataa a wɔde nhama ayɛ a wɔde PVC akata so.

Grey PVC Krataa no Nkyerɛkyerɛmu

Table a edidi so yi bɔ HSQY rigid grey PVC krataa a wɔtaa de di dwuma no mua. Ɛsɛ sɛ wosi nneɛma pɔtee a ɛwɔ hɔ no so dua ma nneɛma a wɔapaw no grade ne nhyehyɛe.

Mfiri, nnuru, anyinam ahoɔden, ogya ne ɔhyew adwumayɛ betumi ayɛ soronko wɔ resin grade, nneɛma a wɔasan de adi dwuma, filler level, pigment ne additives. Ɛsɛ sɛ adetɔfo bisa mfiridwuma ho nsɛm ne sɔhwɛ ho nkrataa a ɛfa nneɛma pɔtee a wɔrekra no ho.

Nneɛma atitiriw a ɛwɔ Rigid Grey PVC Board mu

Nnuru a Ɛko Tia

PVC krataa a ɛyɛ fitaa a ɛyɛ den no wɔ mfasoɔ a ɛko tia acid, alkalis, nkyene, nsa ne nnuru a wɔde yɛ nsuo pii. Eyi ma ɛfata ma nnuru a wɔde yɛ nneɛma, tank linings, plating mfiri ne laboratory fabrication.

Ɛsɛ sɛ wɔhwɛ sɛnea nnuru no hyia no de toto ade ankasa, dodow, ɔhyew, nhyɛso ne bere a wɔde hyɛ mu no ho. PVC nyɛ nea ɛko tia aduru anaa nnuru biara wɔ amansan nyinaa mu.

Rigidity a ɛkorɔn ne Structural Stability

Ɔdansi a ɛyɛ den a ɛyɛ den kɛse no ma ɛyɛ den kɛse sen PVC sini a ɛyɛ mmerɛw ne PVC foam board a emu yɛ hare. Wobetumi de thicknesses a wɔapaw no yiye adi dwuma ama panels a ɛboa ne ho, nnwinnade dan, mfiri afã horow ne fabricated structures.

Nsuo a Ɛmma Nsuo a Ɛba Fam

PVC a ɛyɛ den no ntumi nnye nsu ntɛm, na ɛboa ma krataa no kɔ so kura ne kɛse mu wɔ mmeae a ɛhɔ yɛ nwini, ɛhɔ yɛ nwini anaasɛ wɔhohoro mu.

Electrical Insulation a Wɔde Yɛ Adwuma

PVC wɔ dielectric su a mfaso wɔ so na wobetumi asusuw ho ama anyinam ahoɔden adan, insulating panels, terminal-box components ne afoforo a ɛnyɛ conductive applications.

Ɛsɛ sɛ nnwuma a ɛwɔ dielectric ahoɔden a wɔakyerɛ, adwumayɛ ahoɔden anaa anyinam ahoɔden gyinapɛn di dwuma.

Suban a Ɛma Ne Ho Dum

Mpɛn pii no, PVC a ɛyɛ den no wɔ ogyaframa suban pa sen thermoplastics pii a wɔtaa de di dwuma na ebetumi agyae hyew bere a wɔayi ogya fibea no afi hɔ awie no.

Ɛnsɛ sɛ wɔka krataa no ho asɛm sɛ ogya ntumi nkɔ mu. Ɛsɛ sɛ wɔde nkrataa a ɛkyerɛ sɛnea wɔyɛɛ no ​​pɛpɛɛpɛ, ne kɛse ne ɔkwan a wɔfa so sɔ hwɛ no di UL 94, ASTM E84, EN 13501 anaa ogya dodow afoforo ho adanse.

Mfiri a Wɔde Yɛ Nneɛma a Ɛnyɛ Den

Wobetumi de nnua adwuma ne plastic-fabrication mfiri a wɔtaa de yɛ PVC board no ho adwuma. Wobetumi de saw atwitwa, CNC-routed, drilled, milled, engraved, dannan na mfiri akyekye.

Virgin PVC vs. PVC a Wɔasan de adi dwuma Grey Board

HSQY betumi de PVC nkrataa a ɛyɛ fitaa a wɔde ɔbaabun-nneɛma ne nea wɔasan de adi dwuma nyinaa ama. Abasobɔde a ɛfata no gyina mfiridwuma, aniwa, nneɛma a atwa yɛn ho ahyia ne ɛka a wɔhwehwɛ wɔ adwuma no mu so.

PVC grey board a wɔasan de adi dwuma da so ara yɛ plastic ade. Wɔmfa krataa nhama a wɔasan de adi dwuma na ɛyɛ.

Gray Rigid PVC Nkratafa a Wɔde Di Dwuma

Nnuru Tank ne Tank Linings

Wobetumi ayɛ PVC nkratafa a ɛyɛ fitaa a ɛyɛ den ayɛ no nnuru a wɔde gu nsukorabea, nsukorade a wɔde yɛ adwuma, nsukorade a wɔde kata so, tray a wɔde boaboa nneɛma ano ne nsukorabea a ɛko tia nsɛe.

Ɛsɛ sɛ wobu krataa no mu duru, nea ɛhyɛ mu den, welding nhyehyɛe ne nnuru a ɛne ne ho hyia no ho akontaa sɛnea tank no kɛse te, nsu dodow, adwumayɛ hyew ne mfiridwuma mu adesoa te.

Mfiridwuma mu Ducting ne Fume Extraction

Grey PVC board betumi welded wɔ mframa ducts, fume yiyi nhyehyɛe, scrubber afã horow ne nnwinnade kataso ma corrosive mfiridwuma mmeae.

Nneɛma a Wɔde Yɛ Nhwehwɛmu

Nnwuma a wɔde di dwuma no bi ne laboratory cabinets, adwumayɛbea ahorow, splash guards, sinks, nnwinnade dan ne nnuru a wɔde sie nneɛma.

Nsuo a Wɔde Yɛ Adwuma ne Nsuo a Wɔkora So Dwumadie

Wobetumi asusuw PVC panels a ɛyɛ den ho ama mfiri a wɔde yɛ nsuo, baffles, tank dividers, nnwinnadeɛ linings ne non-pressure fabricated components.

Mfiri Afã ne Mfiri no Nneɛma a Wɔde Yɛ Adwuma

CNC-mfiri a ɛyɛ grey PVC nkrataa betumi adan spacers, mounting plates, covers, supports, akwankyerɛfo, awɛmfo ne mfiri afã afoforo a wɔayɛ.

Adansi ne Formwork

Wobetumi de PVC boards a ɛyɛ fitaa a ɛyɛ den adi dwuma ama formwork a wotumi de di dwuma bio, bere tiaa mu adansi panels, ahobammɔ mpaapaemu, akyi panels ne ɔdan a ɛko tia nsuo.

Ɛsɛ sɛ wɔhwehwɛ adesoa a ɛwɔ ɔdan no mu, mmoa ntam kwan, nsunsuansoɔ tebea, abɔnten so a ɛda adi ne mpɔtam hɔ adan a wɔhwehwɛ ansa na wɔde asi hɔ.

Dawurubɔ, Nsɛnkyerɛnne ne Nkyerɛwee

Wobetumi de ɔkwan a ɛyɛ fitaa a ɛyɛ torotoro no so, akyerɛw, ayɛ ho adwini anaa atintim ama mfiridwuma mu nsɛnkyerɛnne, nkyerɛwde a ɛkyerɛ sɛ obi hu, nnwinnade ho nkyerɛwde, nneɛma a wɔde kyerɛ ne adansi ho mfonini.

Nneɛma a Wɔde Siw Electrical Insulation

Wobetumi de PVC a ɛyɛ den a ɛyɛ fitaa adi dwuma ama anyinam ahoɔden adan, switchboard afã horow, battery-area panels ne insulating barriers wɔ baabi a grade a wɔapaw no hyia anyinam ahoɔden ho nkyerɛkyerɛmu a wɔhwehwɛ.

Sɛnea Wobɛpaw Grey PVC Krataa a Ɛfata

Saa nyansahyɛ ahorow a ɛfa thickness ho yi yɛ nsɛm a wɔde gyina hɔ ma wɔ ɔkwan a ɛkɔ akyiri so. Ɛsɛ sɛ mfiridwuma akontabuo susuw panel no nsusuiɛ, mmoa ntam kwan, adwumayɛ mu hyeɛ, nnuru a wɔde hyɛ mu, nsuo nhyɛsoɔ, mframa adesoa ne ahobanbɔ nneɛma a wɔhwehwɛ.

Grey PVC Krataa Fabrication Akwan a Wɔfa so Yɛ

Saw Twitwa

Wobetumi de saw kurukuruwa, panel saws ne table saws adi dwuma ne blades a ɛfata ma plastic nkratafa a ɛyɛ den. Ɛsɛ sɛ wɔboa board no na ama wosow ne anoano a ɛyɛ mmerɛw no so atew.

CNC Routing ne Milling a Wɔde Di Dwuma

CNC mfiri betumi ayɛ amanne profiles, grooves, recesses, ntokuru, slots, akwan ne pɛpɛɛpɛ-mfiri afã horow.

Ɛsɛ sɛ wɔyɛ nsakrae wɔ cutter geometry, feed speed ne spindle speed mu na wɔakwati ɔhyew a ɛboro so, melting anaasɛ rough edges.

Drill a wɔde tu fam

Wobetumi de standard drills adi dwuma bere a wɔagyina krataa no so yiye no. Ɛsɛ sɛ wɔde kwan a ɛfata ma wɔ fasteners ho na ama ɔhyew atrɛw.

Hot Bending ne Ɔhyew a Wɔde Yɛ Nneɛma

Wobetumi ama PVC krataa a ɛyɛ den no ayɛ hyew na wɔayɛ no ahinanan, akwan, nkataso ne nsusuwii afoforo. Ɛsɛ sɛ ɔhyew no yɛ pɛ na wɔhwɛ so yiye na wɔakwati kɔla a ɛbɛsakra, ahyew anaasɛ emu adwennwen.

Plastic Welding a Wɔde Yɛ Nneɛma

Mframa a ɛyɛ hyew welding ne extrusion welding betumi akɔka PVC panels a ɛyɛ den ho ama tank, ducts, trays ne nnwinnade a wɔayɛ.

Ɛsɛ sɛ welding poma, krataa formulation ne welding parameters no hyia. Ɛsɛ sɛ fabricators a wɔatete wɔn na wɔyɛ structurel ne leak-critical welds.

Adhesive Bonding a Wɔde Yɛ Nneɛma

Wobetumi de PVC solvent cements ne industrial adhesives a ɛne ne ho hyia adi dwuma ama nkwaa a wɔapaw. Ɛsɛ sɛ wosusuw sɛnea wɔbɛhohoro asase ani, sɛnea wɔyɛ nkwaa, bere a wɔde sa yare ne nnuru a wɔde hyɛ mu no ho.

So Wobetumi Atintim anaa Wɔakyerɛw PVC Nkratafa a Ɛyɛ Grey?

Aane. Grey rigid PVC nkrataa betumi aboa CNC engraving, mfiri agyiraehyɛde, screen tintim ne UV flatbed tintim a ɛfata.

Ink ne coating adhesion gyina soro ahotew, soro ahoɔden, ink chemistry ne curing tebea so. Ɛsɛ sɛ wowie tintim ho sɔhwɛ ahorow ansa na wɔayɛ no pii.

Ɛnsɛ sɛ wɔfa no sɛ standard offset printing processes a wɔayɛ ama krataa no yɛ adwuma wɔ PVC boards a ɛyɛ den a ɛyɛ den so ara kwa.

Grey Rigid PVC ne PVC Foam Board

Grey PVC vs. PP, HDPE ne CPVC Nkratafa

Ɔhyew Anohyeto a Ɛwɔ Rigid PVC Nkratafa Mu

Vicat softening temperature ne ɔhyew a wɔkamfo kyerɛ sɛ wɔmfa nkɔ so yɛ adwuma no nyɛ pɛ. Ɔhyew ankasa a wotumi de di dwuma no gyina adesoa, krataa no mu duru, bere a wɔde da adi, nnuru a atwa yɛn ho ahyia ne dimensional stability a wɔhwehwɛ so.

Ɛnsɛ sɛ wɔpaw standard rigid PVC ma kɔ so de di dwuma wɔ ɔhyew a ɛkorɔn mu a wonni mfiridwuma mu nhwehwɛmu. CPVC, PP, PVDF anaa engineering plastic foforɔ betumi afata kɛseɛ berɛ a dwumadie no fa nsuo a ɛyɛ hyeɛ anaa dwumadie no mu hyeɛ a ɛkɔ soro ho.

So Wobetumi De PVC Nkratafa a Ɛyɛ Grey Adi Dwuma Wɔ Abɔnten?

Wobetumi asusuw UV-stabilized grey PVC grades ho ama abɔnten panels, nsɛnkyerɛnne, nnwinnade adan ne adansi dwumadie.

Bere tenten abɔnten adwumayɛ gyina UV stabilizers, pigment, ɔhyew cycling, ɔkwan a wɔfa so de si hɔ, exposure akwankyerɛ ne wim tebea so. Ɛnsɛ sɛ wɔhyɛ dan mu abasobɔde a wɔtaa de di dwuma no ho nkuran ara kwa sɛ ɛyɛ nea wim tebea ntumi nhyia daa.

Amanneɛ Grey PVC Krataa a Wɔpaw

HSQY boa PVC krataa a ɛyɛ den a wɔayɛ no sɛnea wɔpɛ ma fabricators, chemical-equipment manufacturers, adansi nnwumakuw, distributors ne industrial users.

• Amanne krataa a ɛyɛ den

• Amanne tenten ne ne tɛtrɛtɛ

• Nnua a ɛyɛ ahinanan a wɔatwa no sɛnea ne kɛse te

• Light grey, tuntum grey anaa amanne kɔla

• PVC a ɛyɛ ɔbaabun anaasɛ nea wɔasan de adi dwuma

• Amanne density ne formulation

• UV-a wɔde gyina hɔ pintinn

• Nnuru a wɔde di dwuma pɔtee a ɛmma ogya ntumi nhyew

• Anti-static anaa anyinam ahoɔden grades a egyina specification so

• CNC twa ne routing

• Ntokuru a wɔatu ne afiri a wɔde hyɛ mu

• Engraving ne amanne kwan so profiles

• Sini a ɛbɔ ho ban wɔ soro

• Amanne pallet ne export packaging

Nneɛma pa a wɔhwɛ so ma Industrial Grey PVC Nkratafa

Stable nneɛma su ho hia ma machining, welding, nnuru fabrication ne structural nhyiam.

Nneɛma a ɛfa nhwehwɛmu ho betumi ayɛ:

• Nneɛma a wɔyɛ ne nea wɔasan de adi dwuma-a wɔde si so dua

• Krataa no tenten ne ne tɛtrɛtɛ

• Thickness ne thickness a wotumi gyina ano

• Density ne krataa no mu duru

• Flatness ne warpage a ɛyɛ den

• Kɔla a ɛkɔ so pɛpɛɛpɛ

• Surface scratches, amena ne efĩ

• Edge tebea ne twa su

• Tensile ne impact adwumayɛ bere a wɔakyerɛ

• Vicat softening temperature bere a wɔakyerɛ no

• Nnuru a ɛko tia nsɛm a ɛfa adwuma pɔtee bi ho

• Welding ne mfiri adwumayɛ

• Pallet ahoɔden ne po so hyɛn ahobammɔ

Nwoma a Wɔkyerɛw ne Nea Wɔdi So

Nwoma a wɔhwehwɛ no gu ahodoɔ sɛdeɛ PVC a wɔayɛ, dwumadie ne ɔman a wɔrekɔ no teɛ.

Ɛsɛ sɛ adetɔfo ka sɛ ebia wɔhwehwɛ sɛ:

• Mfiridwuma ho nsɛm a wɔde kyerɛw krataa

• Nneɛma ahobammɔ ho nsɛm

• RoHS mpaemuka

• Nwoma a ɛfa REACH ho

• Dade a emu yɛ duru anaa nneɛma a wɔabara ho sɔhwɛ

• Amanneɛbɔ a ɛfa ogya a ɛtumi hyew ho

• Mfiridwuma agyapade ho amanneɛbɔ

• Nsɛm a ɛfa nnuru a ɛko tia ho

• Batch nhwehwɛmu amanneɛbɔ

Ɛsɛ sɛ wɔsi adansedie nkrataa ne sɔhwɛ amanneɛbɔ so dua ma aduru no grade pɔtee sene sɛ wɔbɛfa no sɛ ɛfa PVC grey board biara ho.

Nneɛma a Wɔde Gu Nneɛma Mu ne Amanaman Ntam Nneɛma a Wɔde Kɔma

Mpɛn pii no, wɔde PVC nkrataa a ɛyɛ fitaa no boaboa ano, wɔde kraft krataa anaa film a wɔde kyekyere ho bɔ ho ban na wɔde hyɛ nneɛma a wɔde kɔ amannɔne so.

Ebia nneɛma foforo a wobetumi de ahyɛ mu no bi ne:

• Film a ɛbɔ ho ban wɔ ɔfã biako anaa abien no nyinaa

• Kraft-krataa a wɔde kyekyere nneɛma ho

• Ntwea so ne anoano ahobammɔ

• Dade anaa plastic pallet ahama

• Pallets a wɔde kɔ amannɔne a fumigation nnim

• Amanneɛbɔ nkyerɛwde ne pallet agyiraehyɛde ahorow

• Adetɔfo-ahyɛnsode a wɔde kyekyere nneɛma

Container loading dodow gyina sheet thickness, dimensions, density, pallet sorokɔ ne maximum allowable loading weight.

Dɛn Nti na Wopaw HSQY sɛ Wo Grey PVC Krataa Yɛfo?

• Direct manufacturer supply: Factory mmoa ma industrial fabricators, wɔn a wɔkyekyɛ ne wɔn a wɔtɔ nneɛma pii.

• Wide thickness range: Nkratafa a efi bɛyɛ mm 1 kosi mm 40 wɔ hɔ.

• Nkratafa akɛse pii: Wobetumi de nsusuwii a wɔahyɛ da ayɛ ne nea wɔahyɛ da ayɛ ama.

• Virgin ne recycled grades: Wobetumi asusuw nneɛma ahorow a wɔayɛ ho sɛnea adwumayɛ ne ɛka a wɔhwehwɛ te.

• Custom fabrication: Wobetumi aka cutting, drilling, routing ne engraving services ho asɛm.

• Mmoa a wɔde di dwuma wɔ mfiridwuma mu: Wobetumi apaw nneɛma a wɔde bɛyɛ nnuru, adansi, aguade ho dawurubɔ ne mfiridwuma ho adwuma.

• Nhwɛsoɔ nhwehwɛmu: Wobetumi ayɛ nhwɛsoɔ ho nhyehyɛeɛ ama mfiri, welding, nnuru a wɔde da ne ho asɔ ahwɛ.

• Export packaging: Palletizing ne amanaman ntam po so hyɛn mmoa wɔ hɔ.

• PVC nneɛma a ɛfa ho: Adetɔfoɔ nso bɛtumi ahwɛ HSQY's PVC krataa a wɔde yɛ adwuma.

Nsɛm a Ɛho Hia ma Grey PVC Krataa Quote

Sɛ wopɛ sɛ wunya adwumayɛbea ho nsɛm a ɛyɛ nokware a, yɛsrɛ sɛ fa nsɛm a edidi so yi pii ma sɛnea wubetumi:

• Nea wɔhwehwɛ sɛ ɛyɛ den

• Krataa no tenten ne ne tɛtrɛtɛ

• Dodow a wɔhwehwɛ anaa afe afe ahwehwɛde

• Light grey, tuntum grey anaa amanne kɔla

• Nneɛma a wɔde ɔbaabun anaasɛ nneɛma a wɔasan de adi dwuma

• Density anaa krataa mu duru a wɔhwehwɛ

• Ade a etwa to ne nea wɔde di dwuma

• Nnuru din, dodow ne adwumayɛ hyew

• Wɔde di dwuma wɔ dan mu anaa abɔnten

• Mfiridwuma mu nneɛma a wɔhwehwɛ

• Ogya anaa anyinam ahoɔden gyinapɛn a wɔhwehwɛ

• Twitwa, drilling, routing anaa engraving ahwehwɛde ahorow

• Protective-film ahwehwɛde

• Sɔhwɛ ho amanneɛbɔ anaa mpaemuka a wɔhwehwɛ

• Pallet ne packaging ahwehwɛde ahorow

• Destination port anaa address a wɔde bɛkɔ

Nsɛm a Wɔtaa Bisa Fa Grey PVC Nkratafa Ho

Dɛn na wɔde yɛ PVC board a ɛyɛ fitaa?

Wɔde polyvinyl chloride resin a ɛyɛ den, stabilizers, grey pigments ne application-specific additives na ɛyɛ gray PVC board titiriw. PVC a wɔasan de adi dwuma wɔ grade ahorow bi mu, nanso wɔmfa krataa nhama a wɔasan de adi dwuma na ɛyɛ.

So PVC krataa a ɛyɛ fitaa no yɛ den anaasɛ ɛyɛ ahuru?

Nneɛma a ɛwɔ saa ɔfã yi mu ne PVC nkratafa a ɛyɛ den a ɛyɛ den kɛse. Ɛnsɛ sɛ wɔde PVC ntaaboo a wɔatrɛw mu anaasɛ wɔayɛ no ahuru a emu yɛ hare frafra.

Nneɛma a ɛyɛ den bɛn na ɛwɔ hɔ?

HSQY ma ne nyinaa mu duru bɛyɛ 1–40 mm. Nneɛma a wɔtaa ka ho asɛm no yɛ mm 3 kosi 16.

Dɛn ne PVC krataa a ɛyɛ fitaa no kɛse a wɔahyɛ da ayɛ?

Nneɛma akɛse a wɔtaa de yɛ no bi ne 920 × 1820 mm, 1000 × 2000 mm, 1220 × 2440 mm ne 1300 × 2000 mm. Wobetumi aka sɛnea wɔayɛ no sɛnea wɔpɛ ne panel ahorow a wɔatwa no sɛnea ne kɛse nso ho asɛm.

So PVC krataa a ɛyɛ fitaa no tumi gyina acid ne alkali ano?

PVC a ɛyɛ den no tumi gyina acid, alkalis ne nkyene a wɔde ahyɛ mu pii ano. Nhyiamu gyina nnuru pɔtee, dodow, ɔhyew ne bere a wɔde hyɛ mu so. Ɛho hia sɛ wɔsan hwɛ nnuru a ɛko tia mu wɔ nneɛma a ɛho hia a wɔde di dwuma no mu.

So wobetumi de PVC board a ɛyɛ fitaa ayɛ nnuru a wɔde gu mu?

Yiw, wobetumi de PVC a ɛyɛ den a ɛfata abɔ nnuru a wɔde gu mu, plating tank, tray ne linings mu. Ɛsɛ sɛ nhyehyɛe no bu nnuru a ɛne ne ho hyia, nsu nhyɛso, ɔhyew, ahoɔden ne welding su ho akontaa.

So PVC krataa a ɛyɛ den no ntumi nhyew?

Ɛnsɛ sɛ wɔka plastic krataa biara ho asɛm sɛ ogya ntumi nkɔ mu a wɔansɔ anhwɛ sɛnea ɛfata. Mpɛn pii no, PVC a ɛyɛ den no wɔ su ahorow a ɛma edum ne ho, nanso ɛsɛ sɛ wɔhwɛ sɛ ogya dodow pɔtee biara a ɛwɔ hɔ no yɛ nokware sɛ ɛyɛ ne grade ne ne kɛse pɔtee.

So wobetumi de PVC krataa a ɛyɛ fitaa adi dwuma wɔ abɔnten?

Wobetumi asusuw UV-stabilized grades ho sɛ wɔde bedi dwuma wɔ abɔnten. Wim tebea a ɛtra hɔ kyɛ no gyina sɛnea wɔyɛ no, wim tebea, sɛnea wɔde si hɔ ne tebea a wɔde da no adi so.

So wobetumi ayɛ PVC board a ɛyɛ den no CNC mfiri?

Aane. Wobetumi de nnwinnade a ɛfata a wɔde twa ne mfiri a wɔde di dwuma a wɔahyɛ so ayɛ no kwan, ayɛ no, atutu, adan no na wɔakyerɛw so.

So wobetumi atwa PVC krataa a ɛyɛ fitaa no laser?

Mpɛn pii no, wɔmfa laser twa a wɔtaa yɛ no nkyerɛ mma PVC efisɛ sɛ wɔma ade no yɛ hyew a, ebetumi ama wusiw a ɛyɛ hyew aba na asɛe laser mfiri. Mpɛn pii no, wɔpɛ sɛ wɔde mfiri twa anaa CNC kwan.

So wobetumi de weld abɔ PVC nkrataa abom?

Aane. Wobetumi de mframa a ɛyɛ hyew anaa extrusion welding a PVC welding poma a ɛne no hyia abɔ PVC nkrataa a ɛyɛ den no ho. Ɛsɛ sɛ wɔde weld yɛ mfiri a ɛho hia sɛ nsuo a ɛtɔ gu mu no na wɔn a wɔfata sɛ wɔyɛ nneɛma no sɔ hwɛ.

So wobetumi atintim PVC board a ɛyɛ fitaa?

Wobetumi de screen printing ne UV flatbed printing a ɛne no hyia adi dwuma bere a wɔasiesie ɔfasu ne ink-adhesion sɔhwɛ akyi. Printing adwumayɛ gyina ink, soro tebea ne curing nhyehyɛe so.

Nsonsonoe bɛn na ɛda PVC a ɛyɛ ɔbaabun ne PVC a ɛyɛ fitaa a wɔasan de adi dwuma ntam?

Virgin PVC taa ma kɔla, soro hwɛbea ne mfiri a ɛyɛ pɛpɛɛpɛ so tumi yiye. PVC a wɔasan de adi dwuma no betumi ama ano aduru a ɛho ka sua ama dwumadie a wɔagye adwumayɛ a wɔhwehwɛ no atom.

So wobetumi asan de PVC board a ɛyɛ fitaa adi dwuma bio?

Wobetumi de mfiri ayɛ PVC a ɛyɛ den no foforo wɔ baabi a mmeae a ɛfata a wɔde boaboa nneɛma ano, wɔtetew mu na wɔyɛ ho adwuma wɔ hɔ. Sɛnea wobetumi asan de adi dwuma ankasa no gyina sɛnea wɔyɛ, efĩ ne mpɔtam hɔ nneɛma a wɔde di dwuma bio ho nhyehyɛe so.

So HSQY betumi de PVC panels a wɔatwa no sɛnea wɔpɛ ama?

Aane. Custom krataa dimensions, rectangular twa, CNC routing, drilling, slots ne engraved profiles betumi asusuw ho sɛnea mfonini ne order dodow.

So metumi abisa nhwɛsode ansa na makra?

Wobetumi asiesie nhwɛsode ahorow ama kɔla, ɔfasu, mfiri, welding ne nnuru-a ɛne ne ho hyia nhwehwɛmu. Yɛsrɛ sɛ fa ne kɛse, ne grade ne sɛnea wɔde di dwuma a wɔhwehwɛ no ma.

Dɛn ne MOQ ma PVC nkrataa a ɛyɛ fitaa?

MOQ a wɔtaa de di dwuma no bɛyɛ kilogram 1,000. Dodow a etwa to a ɛba fam koraa no gyina ne kɛse, ne kɛse, ne kɔla, nneɛma a wɔyɛ ne nea wɔhwehwɛ so.

Dɛn ne bere a wɔde yɛ adwuma no?

Reference production bere no bɛyɛ adwuma nnafua 15–18 wɔ specifications ne order ho nsɛm a wɔahyɛ no den akyi. Ebia sɛnea wɔyɛ no sɛnea wɔpɛ, kɔla ne mfiri a wɔde yɛ no behia bere foforo.

Bisa Grey PVC Krataa Quote

Worehwehwɛ PVC krataa a ɛyɛ den a ɛyɛ fitaa yɛfo, PVC board a ɛko tia nnuru anaasɛ mfiridwuma mu PVC panel a wɔatwa no sɛnea wɔpɛ?

Di HSQY nkitaho na bisa mfiridwuma ho nsɛm, nhwɛsode, nneɛma ho nyansahyɛ, amanne nsusuwii, fabrication mmoa, adwumayɛbea bo ne amanaman ntam nneɛma a wɔde mena ho nsɛm.

       Bisa sɛ Wobɛka Asɛm