PVC Nkyerɛwee Krataa

PVC Printing Sheet Manufacturer ma Amanneɛbɔ Printing ne Packaging

HSQY yɛ PVC nkrataa a ɛyɛ den a wotumi tintim ne PVC plastic nkrataa a wɔatintim no sɛnea wɔpɛ ma nsɛnkyerɛnne, nkrataa, nneɛma a wɔde kyekyere nneɛma, nsɛm a wɔde hyɛ nkurɔfo nkuran, nneɛma a wɔde kyerɛw, nneɛma a wɔde siesie fie ne mfiridwuma mu nneɛma.

Yɛn PVC tintim nkratafa no ma ɛyɛ mmerɛw na ɛyɛ pɛpɛɛpɛ ma mfonini ahorow a ɛyɛ fɛ, nsɛm, ahyɛnsode, nsusuwso ne nneɛma a wɔde asiesie. Thickness, krataa kɛse, kɔla, soro wie, tintim nhwɛso ne packaging betumi customized sɛnea customer no tintim nhyehyɛe ne awiei dwumadie.

HSQY betumi de PVC nkrataa a wɔantintim ama adetɔfo ma wɔatintim wɔn ankasa anaasɛ wɔbɛyɛ PVC nkrataa a ɛyɛ den a wɔadi kan atintim sɛnea adwinni a wɔapene so te. Ɛsɛ sɛ adetɔfo kyerɛ sɛ ebia wohia substrate a wotumi tintim anaasɛ krataa a wɔatintim a wɔayɛ no sɛnea wɔpɛ a wɔawie bere a wɔrebisa sɛ wɔmfa sika mma no.

Dɛn Ne PVC Ntintim Krataa?

PVC tintim krataa yɛ polyvinyl chloride krataa a ɛyɛ den anaa ɛyɛ den fã a wɔayɛ ama tintim, afɛfɛde lamination anaasɛ amanne kwan so nsusuwso yɛ. Mpɛn pii no, ɛwɔ soro a ɛyɛ tratraa na ɛyɛ pɛ a ɛboa ma wonya mfonini a emu da hɔ, kɔla ahorow a ɛkɔ so daa ne nsɛm a wɔakyerɛkyerɛ mu.

Ɛgyina sɛnea wɔde di dwuma no so no, krataa no betumi ayɛ nea ɛda adi, ɛyɛ hann, fitaa, tuntum anaa kɔla. Nneɛma a ɛhyerɛn ma wotumi hu ade yiye, bere a nneɛma a ɛyɛ matte boa ma hann a ɛhyerɛn no so tew na ɛma ɛyɛ mmerɛw.

Ɛnsɛ sɛ wɔde PVC tintim krataa no frafra ne PVC frankaa ade a ɛyɛ mmerɛw anaa PVC foam board. HSQY nneɛma a ɛwɔ saa ɔfa yi mu titire ne PVC plastic nkratafa a ɛyɛ den a wɔde tintim, wɔde kyekyere, kaad yɛ, siesie na wɔyɛ.

PVC Krataa a Wotumi tintim ne PVC Krataa a Wɔadi Kan atintim

PVC Krataa a Ɛyɛ Den a Wotumi tintim

Wɔde PVC krataa a ɛyɛ den a wotumi tintim ma a wɔmfa nhyehyɛe a wɔawie. Adetɔfoɔ bɛtumi de tintim nhyehyɛeɛ a ɛne no hyia atintim mfonini, nsɛm, barcode, akwankyerɛ anaa afɛfɛdeɛ nsusuiɛ.

Saa kwan yi fata ma nnwumakuw a wotintim nhoma, wɔn a wɔdannan nneɛma a wɔde kyekyere nneɛma, wɔn a wɔyɛ kaad, nnwumakuw a wɔbɔ dawuru ne wɔn a wɔkyekyɛ a wɔwɔ wɔn ankasa mfiri a wɔde tintim ne nneɛma a wɔde sesa nneɛma.

Amanneɛbɔ a Wɔatintim PVC Rigid Krataa

Wɔde PVC krataa a wɔatintim no sɛnea wɔpɛ no yɛ nea ɔdetɔfo no apene so adwini, kɔla, ahyɛnsode anaa afɛfɛde nsusuwii. Wobetumi de ama sɛ nkratafa a ne kɛse yɛ pɛpɛɛpɛ, nkratafa a wɔatwa anaasɛ nneɛma a ɛfa dwumadie pɔtee bi ho sɛdeɛ adwuma no ahwehwɛdeɛ teɛ.

Ansa na wɔbɛyɛ no kɛse no, ɛsɛ sɛ wosi adwinni, nhoma tintim akwankyerɛ, kɔla a wɔde gyina so, ɔfasu a wɔawie, tintim fã ne kɔla a wogye tom no so dua.

Mfaso Titiriw a Ɛwɔ PVC Nkrataa a Wɔde tintim Nkratafa So

• Ntintim a ɛyɛ mmerɛw: Fafa a ɛyɛ tratraa na ɛyɛ pɛpɛɛpɛ boa mfonini a emu da hɔ, nsɛm a ɛyɛ nnam ne kɔla a wɔahyɛ so a wɔsan yɛ.

• Kɔla ne nsusuwso a wɔahyɛ da ayɛ: Wobetumi de PVC nkrataa ama wɔ fitaa, nea ɛda adi, kɔla anaa nea wɔatintim no nhyehyɛe mu.

• Rigidity pa: Solid rigid PVC ma structure gyinabea kɛse sen vinyl film a ɛyɛ mmerɛw.

• Nsuo a ɛko tia: PVC nnye nsuo te sɛ krataa, na ɛma ɛyɛ nea mfasoɔ wɔ so ma mmeaeɛ a ɛhɔ yɛ nwini ne nneɛma a wɔde kyerɛ a wɔtumi de di dwuma bio.

• Ɛnyɛ den sɛ wɔbɛyɛ: Wobetumi atwitwa grades a ɛfata, abɔ punch, atwa die, abɔ mu, atutu, ayɛ laminated, bonded anaasɛ thermoformed.

• Nneɛma pii a wobetumi apaw: Glossy, matte, transparent, opaque ne textured finishes a wɔapaw no betumi ayɛ sɛnea adwuma no ahwehwɛde ahorow te.

• Nneɛma a wɔyɛ no daa: Ne kɛse, kɔla ne ne soro su a wɔahyɛ so boa tintim ne nsakrae adwuma a ɛkɔ so.

• Nsusuwii a wɔahyɛ da ayɛ: Nkratafa akɛse a wɔahyɛ da ayɛ, A4 nkratafa ne nsusuwii a wɔatwa no sɛnea wɔpɛ wɔ hɔ.

PVC Printing Krataa a Wɔtaa Yɛ no Ho Nsɛm

Nsɛm a edidi so yi gyina hɔ ma HSQY a wɔtaa de ma no. Nkyerɛkyerɛmu a etwa to gyina ne kɛse, kɔla, ɔkwan a wɔfa so tintim, ɔfasu a wɔde wie, dodow a wɔkra ne sɛnea wɔde di dwuma so.

Akwan Bɛn na Wobetumi Afa so Atintim Wɔ PVC Nkratafa So?

UV Digitals a Wɔde tintim nhoma

Wɔtaa de UV flatbed tintim di dwuma de tintim mfonini a ɛwɔ kɔla nyinaa tẽẽ wɔ PVC nkrataa a ɛyɛ den so. UV curing ma ink no sa ntɛmntɛm na ɛfata ma signage, displays, decorative panels ne promotional products.

Printing yiedie gyina ink nhyehyɛeɛ, printa nhyehyɛeɛ, soro ahotew ne soro ahoɔden a ɛwɔ PVC krataa no so. Ɛsɛ sɛ wowie nneɛma a wɔyɛ ho sɔhwɛ ansa na wɔatintim no kɛse.

Screen Printing a Wɔde Kyerɛw Nsɛm

Screen printing fata ma logos, nkyerɛwee, kɔla a ɛyɛ den, kɔkɔbɔ nsɛnkyerɛnne, nkrataa ne mfonini ahorow a wɔayɛ no mpɛn pii. Ebetumi ama kɔla a ɛyɛ den akata so na wɔtaa paw no ma ɛyɛ kɛse a ɛyɛ mfinimfini ne nea ɛkɔ soro.

Ɛsɛ sɛ adetɔfo si ink su, mesh, curing temperature ne adhesion a wɔhwehwɛ so dua ansa na wɔayɛ efisɛ PVC formulations ahorow betumi ayɛ wɔn ade wɔ ɔkwan soronko so wɔ solvents ne ɔhyew ho.

Offset ne Ntintim a Ɛyɛ Titiriw

PVC nkratafa a ɛyɛ tratraa a wɔde yɛ kaad, nkyerɛwde ne nkrataa a wɔde kyerɛw nneɛma betumi ne offset, gravure anaa tintim nhyehyɛe titiriw a wɔapaw no ahyia. Ɛsɛ sɛ wɔde tintim nhyehyɛe no ne krataa no mu duru, nea wɔde yɛ adwuma wɔ soro ne ink nnuru no hyia.

Ebia ɛho behia sɛ wɔde corona ayaresa, primer anaasɛ ɔfasu ho ayaresa foforo bere a mfitiase ahoɔden a ɛwɔ soro no mma ink a ɛbata ho sɛnea ɛsɛ no.

PVC Printing Nkratafa a Wɔde Di Dwuma

Dawurubɔ Nsɛnkyerɛnne ne Nneɛma a Wɔde Kyerɛkyerɛ

Wɔde PVC nkrataa a ɛyɛ den a wotumi tintim di dwuma de yɛ dan mu nsɛnkyerɛnne, nsɛm a wɔde hyɛ nkurɔfo nkuran, nneɛma a wɔde kyerɛ wɔ baabi a wɔtɔ nneɛma, ɔyɛkyerɛ mfonini ahorow, nneɛma ho nsɛm a wɔde yɛ nneɛma ne nneɛma a wɔde kyerɛ wɔ aguadidan mu.

Wɔ abɔnten nsɛnkyerɛnne ho no, ɛsɛ sɛ adetɔfo bisa sɛ wɔmfa UV-stabilized na wim tebea ntumi nkɔ. Ɛnsɛ sɛ wɔfa no sɛ standard indoor PVC printing sheet no ma wonya abɔnten adwumayɛ bere tenten.

Nnaka a Wɔde Gu Nneɛma Mu ne Nea Wɔbobɔw

Wobetumi de PVC nkrataa a wɔatintim no teateaa adi dwuma ama nnaka a ɛyɛ mmerɛw, nneɛma a wɔde kɔla ayɛ, nnaka a wɔbobɔw, nnaka mfɛnsere, nneɛma a wɔde hyɛ nkurɔfo nkuran ne nneɛma a wɔde kyekyere nneɛma a wɔde siesie nneɛma.

Ɛsɛ sɛ packaging projects kyerɛ folding akwankyerɛ, crease design, bonding kwan, printing gyinabea ne finished product dimensions. Wɔkamfo kyerɛ sɛ wɔnyɛ prototype sɔhwɛ ansa na wɔayɛ no pii.

Kaad ne Nneɛma a Wɔde Kyerɛw Nsɛm

Wobetumi de PVC tintim nkrataa adi dwuma de ayɛ asɔremma nkrataa, nsɛm a wɔde hyɛ nkurɔfo nkuran, agodie nkrataa, nneɛma a wɔde hu nnipa, nneɛma a wɔde kyekyɛ nneɛma mu, nhoma a wɔde kyerɛw nsɛm kata so ne nneɛma a wɔde kyerɛw nsɛm.

Ɛsɛ sɛ wɔn a wɔyɛ kaad no de kaad a wɔawie no kɛse, lamination nhyehyɛe, ɔkwan a wɔfa so tintim, punching ahwehwɛde ne surface finish ma bere a wɔrepaw ade no.

Decorative Panels ne Mfinimfini Nneɛma a Wɔde Di Dwuma

PVC nkrataa a wɔatintim no sɛnea wɔpɛ no betumi asan ayɛ nnua, ɔbo, geometric, branded ne decorative patterns ama emu panels, retail fixtures, partitions ne furniture components.

Ɛsɛ sɛ wɔsi abrasion resistance a ɛhia, ogyaframa adwumayɛ, nnuru a ɛko tia ne service temperature so dua wɔ ɔkwan soronko so ma emu anaa mfiridwuma mu adwuma biara.

Industrial Labels ne Amanneɛbɔ Panels

Wobetumi atintim PVC nkrataa a ɛyɛ den a wɔde adwumayɛ ho akwankyerɛ, kɔkɔbɔ, nnwinnade ho nkyerɛwde, nsɛm a ɛkyerɛ sɛ obi hu ne mfiridwuma ho mfonini akyerɛw.

Ɛsɛ sɛ wɔde nnuru a wɔde di dwuma, nneɛma a wɔde tew nneɛma ho, ɔhyew ne ɔsom nkwa nna a wɔhwehwɛ ma sɛnea ɛbɛyɛ a wobetumi asusuw krataa ne ink nhyehyɛe a ɛfata ho.

PVC Ntintim Krataa Ahorow

White PVC Nkyerɛwde Krataa

White PVC krataa ma opaque akyi ma mfonini ahorow a ɛyɛ kɔla ahorow, mfonini ahorow, nsɛm ne ahyɛnsode ahorow. Wɔtaa paw no ma nsɛnkyerɛnne, nkrataa, nneɛma a wɔde kyerɛ ne nneɛma a wɔatintim wɔ baabi a ɛho hia sɛ kɔla ahorow a ɛne ne ho bɔ abira kɛse.

PVC Nkyerɛwee Krataa a Ɛda Hɔ

PVC krataa a ɛyɛ mmerɛw no fata ma nneɛma a wɔde kyekyere nneɛma a emu da hɔ, adaka mfɛnsere, nkataso, nneɛma a wɔde hyɛ nkurɔfo nkuran ne nsusuwii ahorow a ɛsɛ sɛ akyi anaa ade a wɔakyekyere no kɔ so da adi.

Ebia ɛho behia sɛ wɔde ink fitaa anaasɛ underprint layer di dwuma bere a wɔretintim mfonini a ɛnyɛ hann wɔ PVC a ɛyɛ mmerɛw so no.

PVC Printing Krataa a ɛwɔ kɔla ahorow

PVC nkrataa a ɛwɔ kɔla ahorow no brɛ hia a ehia sɛ wotintim akyi kɔla a edi mũ no ase na ebetumi aboa brand identification, card production, decorative packaging ne display designs.

Adetɔfoɔ nso bɛtumi ahwɛ HSQY's PVC kɔla krataa range ma kɔla foforo ne soro options.

Glossy PVC Nkyerɛwee Krataa

Glossy PVC krataa ma ɛyɛ hann na ɛdannan a ebetumi ama kɔla saturation ne aniwa nkɛntɛnso akɔ soro. Wɔtaa de yɛ nneɛma a wɔde siesie nneɛma, nkrataa ne nneɛma a wɔde hyɛ nkurɔfo nkuran.

Matte PVC Nkyerɛwee Krataa

Matte PVC krataa brɛ reflections ase na ɛma ɛyɛ mmerɛw wɔ soro. Ɛfata ma nsɛm ho panels, dan mu mfonini, premium packaging ne applications a wɔhwɛ wɔ kanea a ano yɛ den ase.

Solid PVC Printing Krataa vs PVC Foam Board

Ɛsɛ sɛ adetɔfo ka pefee sɛ ebia wohia PVC krataa a ɛyɛ den a ɛyɛ den anaasɛ PVC foam board a emu yɛ hare. Nneɛma abien no wɔ densities, thickness ranges, fabrication akwan ne bo nhyehyɛe ahorow.

Sɛnea Wobɛpaw PVC Printing Krataa a Ɛteɛ

Paw Thickness a Ɛteɛ

PVC nkratafa a ɛyɛ tratraa fata ma nkrataa, nkataso, nkyerɛwde, nnaka a wɔbobɔw ne nneɛma a wɔde kyekyere nneɛma a emu yɛ hare. Nkratafa a ɛyɛ den ma nsɛnkyerɛnne, nnua, nneɛma a wɔde kyerɛ ne nneɛma a wɔayɛ no yɛ den kɛse.

Ɛsɛ sɛ wɔpaw ne kɛse sɛnea ne nsusuwii a wɔawie, ne katee, mfiri a wɔde tintim nhoma, ɔkwan a wɔfa so twa, nea wɔhwehwɛ sɛ wɔbobɔw ne ɔsom tebea a wɔhwɛ kwan no te.

Si Printing System ne Ink no so dua

Ka kyerɛ HSQY sɛ ebia wɔbɛfa UV flatbed, screen, offset, gravure anaa ɔkwan foforo so atintim krataa no. Fa ink brand anaa ink type no ma wɔ baabi a ɛbɛyɛ yiye.

Ɛsɛ sɛ wɔsɔ adhesion, curing temperature, solvent resistance ne kɔla adwumayɛ hwɛ ansa na wɔayɛ no aguadi.

Paw Glossy anaa Matte Surface

Paw PVC a ɛhyerɛn bere a ɛho hia sɛ ɛhyerɛn, ɛhyerɛn ne kɔla a ɛyɛ den no. Paw matte PVC bere a glare reduction, akenkan ne aniwa a ɛyɛ mmerɛw ho hia kɛse.

Kyerɛkyerɛ Dan mu anaa Abɔnten a Wɔde Di Dwuma mu

Standard PVC tintim krataa no taa fata ma controlled dan mu dwumadie. Abɔnten nsɛnkyerɛnne hwehwɛ sɛ wɔde UV gyina pintinn a ɛfata, wim tebea a ɛko tia, abɔnten ink a ɛne no hyia ne nea ɛfata a wɔde si hɔ.

Si Post-Printing Processing no so dua

Ka kyerɛ nea ɔde ma no sɛ ebia wɔbɛtwa krataa a wɔatintim no die cut, punched, folded, laminated, bonded, welded anaa thermoformed. Saa akwan yi betumi aka PVC a wɔhwehwɛ ne ne kɛse.

PVC Printing Krataa a Wɔapaw

• Amanneɛbɔ a ɛyɛ den ne krataa no nsusuwii

• Kɔla ahorow a ɛyɛ mmerɛw, fitaa, tuntum ne nea wɔayɛ no sɛnea wɔpɛ

• Glossy, matte anaasɛ wɔapaw textured surfaces

• Ɔfã biako anaa ɔfã abien tintim

• Amanne logos, nkyerɛwee, mfonini ne afɛfɛde nsusuwii

• Amanneɛbɔ tintim akwankyerɛ ne nhwɛso san

• Twitwa nkratafa, A4 nkratafa ne application-specific dimensions

• Die twa, punching, folding ne fabrication mmoa

• Protective surface film wɔ baabi a ɛho hia

• Customized export packaging ne pallet nhyehyɛe

Amanneɛbɔ a wɔatintim ahyɛde taa hwehwɛ adwinni fael, kɔla nkyerɛkyerɛmu, nsusuwii a wɔhwehwɛ, tintim fã, nhwɛso kwankyerɛ, dodow ne nea wɔpɛ sɛ wɔde di dwuma.

Nhwehwɛmu a wɔyɛ wɔ PVC Nkratafa a Wɔatintim ho

Ɛsɛ sɛ wɔsɔ PVC krataa a wɔatintim no hwɛ sɛnea nneɛma no te ne sɛnea wɔatintim no nyinaa te. Ebia mmeae a ɛho hia a wɔhwehwɛ mu no bi ne:

• Thickness ne dimensional abodwokyɛre

• Nkratafa a ɛyɛ tratraa ne nea ɛho tew wɔ soro

• Base kɔla a ɛkɔ so pɛpɛɛpɛ

• Kɔla a wɔatintim no pɛpɛɛpɛ

• Mfonini a wɔkyerɛw din ne gyinabea a wɔde tintim

• Ink adhesion ne ayaresa

• Scratch, rub anaa tape-test adwumayɛ wɔ baabi a wɔakyerɛ

• Pattern akwankyerɛ ne repeat pɛpɛɛpɛ

• Twitwa, folding anaa forming adwumayɛ

• Nneɛma a wɔde kyekyere nneɛma ne nea wɔbɔ ho ban wɔ soro

Ɛsɛ sɛ adetɔfo a wɔwɔ brand-color ahwehwɛde a emu yɛ den de honam fam kɔla nhwɛsode, Pantone reference anaa adanse a wɔatintim a wɔapene so ma.

Dɛn Nti na Wopaw HSQY sɛ Wo PVC Printing Sheet Supplier?

• Manufacturer ne bulk supplier a PVC nkrataa a ɛyɛ den

• Printable ne wie amanne tintim PVC krataa options

• Amanneɛbɔ thickness, kɛse, kɔla, wie ne tintim nhwɛso

• Nneɛma a wɔpaw mmoa ma tintim ne fabrication

• Nhwɛsode ne adwinni a wosi so dua ansa na wɔayɛ no kɛse

• Nneɛma a wɔde ma nnwumakuw a wotintim nhoma, wɔn a wɔsakra nneɛma, wɔn a wɔkyekyɛ ne wɔn a wɔtɔ wɔ mfiridwuma mu

• Export packaging ne amanaman ntam po so hyɛn mmoa

HSQY betumi asusuw wo tintim kwan, adwinni, ne kɛse, ne nsusuwii ne nneɛma a wɔawie ahwehwɛde ho ansa na wɔakamfo PVC krataa ho nkyerɛkyerɛmu akyerɛ.

Nsɛm a Wɔtaa Bisa Fa PVC Nkrataa a Wɔde tintim Nkrataa Ho

Dɛn na wɔde PVC tintim krataa di dwuma?

Wɔde PVC tintim nkrataa di dwuma ma nsɛnkyerɛnne, display panels, cards, packaging, box windows, stationery, decorative panels, technical labels ne custom printed plastic components.

So PVC tintim krataa ne PVC foam board yɛ pɛ?

Dabi PVC tintim krataa a ɛyɛ den a ɛyɛ den no wɔ nhyehyɛe a ɛyɛ den, bere a PVC foam board no wɔ core a wɔatrɛw mu ne density a ɛba fam. Wɔtaa paw PVC a ɛyɛ den ma kaad, nneɛma a wɔde kyekyere nneɛma ne afã horow a wɔayɛ no tratraa, bere a wɔtaa de foam board di dwuma ma nsɛnkyerɛnne akɛse ne nneɛma a wɔde kyerɛ nneɛma.

So wobetumi de PVC nkrataa adi dwuma de ayɛ UV dijitaal tintim?

Aane. Wobetumi de UV dijitaal mfiri atintim PVC nkrataa a ɛyɛ den a ɛfata. Ɛsɛ sɛ wɔde printa pɔtee no sɔ ink adhesion ne curing hwɛ, ink ne sheet surface ansa na wɔayɛ no pii.

So wobetumi atintim PVC nhoma tintim nkrataa wɔ screen so?

Aane. Wɔtaa de screen printing di dwuma ma logos, nsɛm, kɔla a ɛyɛ den, cards, labels ne patterns a wɔasan ayɛ. Ɛsɛ sɛ ink a wɔapaw no ne PVC hyia.

So PVC krataa hia corona treatment ansa na wɔatintim?

Ɛnyɛ nhoma tintim biara na ɛhwehwɛ sɛ wɔyɛ corona ayaresa. Ahwehwɛde no gyina PVC ani, ink chemistry ne adhesion a wɔhwehwɛ so. Ɛsɛ sɛ wodi kan wie ahoɔden a ɛwɔ soro anaa ink a ɛbata ho ho sɔhwɛ.

Nneɛma a ɛyɛ den bɛn na ɛwɔ hɔ?

HSQY PVC tintim nneɛma a wɔakyerɛw ne nea wɔayɛ no sɛnea wɔpɛ no kata bɛyɛ 0.12–6.5mm. Sɛnea wobetumi anya ankasa no gyina kɔla, ɔfasu, kɛse, ɔkwan a wɔfa so tintim ne dodow a wɔkra so.

So HSQY betumi ayɛ krataa no kɛse sɛnea wɔpɛ?

Aane. Nneɛma akɛse a wɔtaa de yɛ no bi ne 700 × 1000mm, 915 × 1830mm, 1220 × 2440mm ne A4 nkrataa. Wobetumi aka nsusuwii afoforo ho asɛm sɛnea tumi a wɔyɛ ne dodow a wɔkra te.

So PVC tintim nkrataa a ɛhyerɛn na ɛyɛ matte wɔ hɔ?

Aane. Wobetumi de glossy, matte ne apaw mixed-surface configurations ama. Ɛsɛ sɛ wɔsi so dua sɛ ɛwɔ hɔ sɛdeɛ ne kɛseɛ, kɔla ne tintim ahwehwɛdeɛ teɛ.

So HSQY betumi atintim me logo anaa custom pattern?

Aane. Wobetumi asusuw ahyɛnsode ahorow a wɔahyɛ da ayɛ, nsɛm, kɔla ahorow, mfonini ahorow ne nneɛma a wɔde siesie fie ho. Ɛsɛ sɛ adetɔfo de adwinni, nsusuwii, gyinabea a wotintim, kɔla a wɔhwehwɛ ne dodow a wɔasusuw ho ma.

So wobetumi de PVC tintim krataa adi dwuma wɔ abɔnten?

Abɔnten so a wɔde bedi dwuma no hwehwɛ sɛ wɔde PVC a ɛfata a ɛko tia wim tebea na UV tumi gyina ano a wɔde abɔnten ink a ɛne no hyia ka ho. Standard indoor grades betumi asesa kɔla anaasɛ ahwere adwumayɛ bere a wɔde wɔn ho ahyɛ abɔnten bere tenten no.

So PVC tintim krataa no ntumi nsɛe?

Standard PVC wɔ normal surface durability nanso ɛnsɛ sɛ wɔka ho asɛm ara kwa sɛ scratch-proof. Ebia ɛho behia sɛ wɔde sini a ɛbɔ ho ban, ade a wɔde kata so anaa laminate di dwuma ma nneɛma a wɔtaa di ho dwuma.

So wobetumi abɔ PVC nkrataa a wɔatintim no mu anaasɛ wɔayɛ no sɛnea ɛyɛ hyew?

Wobetumi abɔ grades a ɛfata, abɔ mu anaasɛ wɔayɛ no thermoformed. Ɛsɛ sɛ printing ink, curing tebea ne forming temperature ne forming nhyehyɛe no hyia. Ɛsɛ sɛ wɔsɔ nhwɛsode a wɔatintim no hwɛ ansa na wɔayɛ.

So wobetumi asan de PVC tintim krataa adi dwuma bio?

Wobetumi de mfiri asan de PVC adi dwuma bio wɔ baabi a ɛwɔ mmeae a ɛfata a wɔboaboa ano, wɔkyerɛ ne nea wɔde di dwuma bio. Ink a wɔatintim, nneɛma a wɔde kata so, laminates, adhesives ne nneɛma a wɔde afrafra a wɔde ayɛ no betumi aka sɛnea wɔsan de di dwuma bio a mfaso wɔ so.

So PVC krataa a wɔde tintim nhoma no fata ma nneɛma a wɔde kyekyere nneɛma a ɛne aduan di nkitaho?

Ɛsɛ sɛ wɔsi so dua sɛ aduane ne nkitahodi fata ma PVC a wɔayɛ no pɛpɛɛpɛ, tintim ink, nea wɔde kata so, nea wɔde di dwuma, nkitahodi tebea ne baabi a wɔrekɔ-gua ho mmara. Ɛnsɛ sɛ wɔde PVC a wɔde tintim nhoma a wɔahyɛ da ayɛ no di dwuma ara kwa sɛ ɛne aduan a wɔde di nkitaho no hyia.

Dɛn ne MOQ ma PVC tintim nkrataa a wɔahyɛ da ayɛ?

MOQ a wɔtaa de yɛ nneɛma a wɔakyerɛw din no bɛyɛ 1000kg. Kɔla ahorow a wɔahyɛ da ayɛ, nsusuwso a wɔatintim, nneɛma soronko a ɛwɔ soro anaa akɛse a ɛnyɛ nea ɛfata betumi ahwehwɛ sɛ wɔyɛ dodow a ɛba fam koraa a ɛkorɔn.

So metumi abisa nhwɛsode ansa na makra?

Aane. Wobetumi de nhwɛsode bi asusuw ne kɛse, kɔla, ɔfasu, ink a ɛbata ho, nea wɔatwa, nea wɔbobɔw ne nea wɔde yɛ adwuma no ho. Ebia nhwɛsode a wɔatintim no sɛnea wɔpɛ no behia sɛ wosi adwinni so dua na wotua nhwɛsode ho ka.

Nsɛm bɛn na wɔhwehwɛ na wɔafa aka asɛm?

Fa ne kɛse, krataa no nsusuwii, kɔla, ɔfasu awie, ɔkwan a wɔfa so tintim, adwinni, tintim fã, dwumadie, ahyɛdeɛ dodoɔ, afe afe ahwehwɛdeɛ, hyɛn gyinabea a wɔrekɔ ne nkrataa a wɔhwehwɛ sɛ wɔdi mmara so ma.

Bisa PVC Printing Sheet Nhwɛso anaa Quotation

Di HSQY ho nkɔmmɔ na woanya PVC nkrataa a ɛyɛ den a wotumi tintim, PVC nkratafa fitaa a wɔde tintim nhoma, PVC nkrataa a ɛwɔ kɔla anaasɛ PVC plastic nkrataa a wɔatintim a wɔahyɛ da ayɛ awie.

Send wo hia thickness, dimensions, kɔla, surface, tintim kwan, adwinni ne akontaabu dodow denam HSQY contact page na woanya nneɛma ho nyansahyɛ ne quotation.